X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fcat_b%2Fmu1_100mhz%2F106%2Fconfig_file_o_du.dat;fp=fhi_lib%2Fapp%2Fusecase%2Fcat_b%2Fmu1_100mhz%2F106%2Fconfig_file_o_du.dat;h=31ca615e4be28f970cde96884115acbe88011ad9;hp=11b4c1a84dcf617fb4590a8d28921c8272dd442d;hb=2de97529a4c5a1922214ba0e6f0fb84cacbd0bc7;hpb=81a09690b36b3a4e89b4dae34f30933de13f7f90

diff --git a/fhi_lib/app/usecase/cat_b/mu1_100mhz/106/config_file_o_du.dat b/fhi_lib/app/usecase/cat_b/mu1_100mhz/106/config_file_o_du.dat
index 11b4c1a..31ca615 100644
--- a/fhi_lib/app/usecase/cat_b/mu1_100mhz/106/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/cat_b/mu1_100mhz/106/config_file_o_du.dat
@@ -25,12 +25,12 @@ instanceId=0 # 0,1,2,... in case more than 1 application started on the same sys
 appMode=0 # O-DU(0) | O-RU(1)
 xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=16 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
-antNumUL=8 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B 
+antNum=16 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
+antNumUL=8 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
 antElmTRx=64 #number of Antenna Elements for Cat B default 32T32R
 
 #UEs
-muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources    
+muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
 DlLayersPerUe=1 #number of RX anntennas on DL UE side
 UlLayersPerUe=1 #number of TX anntennas on UL UE side
 
@@ -60,12 +60,12 @@ sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
 Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
 
-ioCore=5           # core id 
+ioCore=5           # core id
 ioWorker=0x2000000 # mask [0- no workers]
 
 # Eth 0
@@ -80,7 +80,7 @@ ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
 duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
 
-numSlots=10 #number of slots per IQ files
+numSlots=20 #number of slots per IQ files
 antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
 antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
 antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
@@ -138,7 +138,7 @@ UlBfwUe15=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_7.bin   #UE7 weights for TRX ante
 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=189
 
-srsEanble=1 # Enable (1)| disable (0) SRS 
+srsEanble=1 # Enable (1)| disable (0) SRS
 srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
 
 #DL PRB / %	Used RBs	UL PRB / %	Used RBs
@@ -146,24 +146,37 @@ srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
 
 ###########################################################
 ##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
 
 nPrbElemDl=6
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
+# weight base beams
 PrbElemDl0=0,30,0,14,0,1,1,9,1
 PrbElemDl1=30,30,0,14,1,1,1,9,1
 PrbElemDl2=60,30,0,14,2,1,1,9,1
 PrbElemDl3=90,30,0,14,3,1,1,9,1
 PrbElemDl4=120,30,0,14,4,1,1,9,1
 PrbElemDl5=150,30,0,14,5,1,1,9,1
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
+ExtBfwDl0=10,3,0,0,9,1
+ExtBfwDl1=10,3,0,0,9,1
+ExtBfwDl2=10,3,0,0,9,1
+ExtBfwDl3=10,3,0,0,9,1
+ExtBfwDl4=10,3,0,0,9,1
+ExtBfwDl5=10,3,0,0,9,1
 
 nPrbElemUl=3
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
+# weight base beams
 PrbElemUl0=0,30,0,14,0,1,1,9,1
 PrbElemUl1=30,30,0,14,1,1,1,9,1
 PrbElemUl2=60,30,0,14,2,1,1,9,1
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
+ExtBfwUl0=10,3,0,0,9,1
+ExtBfwUl1=10,3,0,0,9,1
+ExtBfwUl2=10,3,0,0,9,1
 
 ###########################################################
 
@@ -173,7 +186,7 @@ nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to
 compression=1 # (1) compression enabled (0) compression disabled
 
 ##Debug
-debugStop=0 #stop app on 1pps boundary (gps_second % 30)
+debugStop=1 #stop app on 1pps boundary (gps_second % 30)
 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
 
@@ -197,8 +210,8 @@ T2a_min_up=71  # 71.35in us
 T2a_max_up=428 # 428.12us
 
 #Transmission Window
-Ta3_min=20 # in us 
-Ta3_max=32 # in us 
+Ta3_min=20 # in us
+Ta3_max=32 # in us
 
 ###########################################################
 ##O-DU Settings
@@ -217,7 +230,7 @@ T1a_min_up=96  #71 + 25 us
 T1a_max_up=196 #71 + 25 us
 
 #Reception Window
-Ta4_min=0  # in us 
-Ta4_max=75 # in us 
+Ta4_min=0  # in us
+Ta4_max=75 # in us
 ###########################################################