X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fcat_b%2Fmu1_100mhz%2F1%2Fconfig_file_o_ru.dat;fp=fhi_lib%2Fapp%2Fusecase%2Fcat_b%2Fmu1_100mhz%2F1%2Fconfig_file_o_ru.dat;h=d149f4e76000523b1eb2192ec6973139d5c73512;hp=55f0b1f07667d13e46d657bec08c099f86adf1ff;hb=2de97529a4c5a1922214ba0e6f0fb84cacbd0bc7;hpb=81a09690b36b3a4e89b4dae34f30933de13f7f90

diff --git a/fhi_lib/app/usecase/cat_b/mu1_100mhz/1/config_file_o_ru.dat b/fhi_lib/app/usecase/cat_b/mu1_100mhz/1/config_file_o_ru.dat
index 55f0b1f..d149f4e 100644
--- a/fhi_lib/app/usecase/cat_b/mu1_100mhz/1/config_file_o_ru.dat
+++ b/fhi_lib/app/usecase/cat_b/mu1_100mhz/1/config_file_o_ru.dat
@@ -22,12 +22,12 @@ instanceId=1 # 0,1,2,... in case more than 1 application started on the same sys
 appMode=1 # O-DU(0) | O-RU(1)
 xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
-antNumUL=4 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B 
+antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
+antNumUL=4 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
 antElmTRx=32 #number of Antenna Elements for Cat B default 32T32R
 
 #UEs
-muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources    
+muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
 DlLayersPerUe=1 #number of RX anntennas on DL UE side
 UlLayersPerUe=1 #number of TX anntennas on UL UE side
 
@@ -57,7 +57,7 @@ sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
 Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
@@ -75,7 +75,7 @@ ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
 duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
 
-numSlots=10 #number of slots per IQ files
+numSlots=20 #number of slots per IQ files
 antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
 antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
 antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
@@ -113,49 +113,51 @@ antPrachC15=./usecase/cat_b/mu1_100mhz/ant_7.bin  #CC3
 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=189
 
-srsEanble=1 # Enable (1)| disable (0) SRS 
+srsEanble=1 # Enable (1)| disable (0) SRS
 srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
 
-antSrsC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   
-antSrsC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   
-antSrsC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   
-antSrsC3=./usecase/cat_b/mu1_100mhz/ant_3.bin   
-antSrsC4=./usecase/cat_b/mu1_100mhz/ant_4.bin   
-antSrsC5=./usecase/cat_b/mu1_100mhz/ant_5.bin   
-antSrsC6=./usecase/cat_b/mu1_100mhz/ant_6.bin   
-antSrsC7=./usecase/cat_b/mu1_100mhz/ant_7.bin   
-antSrsC8=./usecase/cat_b/mu1_100mhz/ant_0.bin   
-antSrsC9=./usecase/cat_b/mu1_100mhz/ant_1.bin   
-antSrsC10=./usecase/cat_b/mu1_100mhz/ant_2.bin 
-antSrsC11=./usecase/cat_b/mu1_100mhz/ant_3.bin 
-antSrsC12=./usecase/cat_b/mu1_100mhz/ant_4.bin 
-antSrsC13=./usecase/cat_b/mu1_100mhz/ant_5.bin 
-antSrsC14=./usecase/cat_b/mu1_100mhz/ant_6.bin 
-antSrsC15=./usecase/cat_b/mu1_100mhz/ant_7.bin 
-antSrsC16=./usecase/cat_b/mu1_100mhz/ant_0.bin   
-antSrsC17=./usecase/cat_b/mu1_100mhz/ant_1.bin   
-antSrsC18=./usecase/cat_b/mu1_100mhz/ant_2.bin   
-antSrsC19=./usecase/cat_b/mu1_100mhz/ant_3.bin   
-antSrsC20=./usecase/cat_b/mu1_100mhz/ant_4.bin   
-antSrsC21=./usecase/cat_b/mu1_100mhz/ant_5.bin   
-antSrsC22=./usecase/cat_b/mu1_100mhz/ant_6.bin   
-antSrsC23=./usecase/cat_b/mu1_100mhz/ant_7.bin   
-antSrsC24=./usecase/cat_b/mu1_100mhz/ant_0.bin   
-antSrsC25=./usecase/cat_b/mu1_100mhz/ant_1.bin   
-antSrsC26=./usecase/cat_b/mu1_100mhz/ant_2.bin 
-antSrsC27=./usecase/cat_b/mu1_100mhz/ant_3.bin 
-antSrsC28=./usecase/cat_b/mu1_100mhz/ant_4.bin 
-antSrsC29=./usecase/cat_b/mu1_100mhz/ant_5.bin 
-antSrsC30=./usecase/cat_b/mu1_100mhz/ant_6.bin 
-antSrsC31=./usecase/cat_b/mu1_100mhz/ant_7.bin 
+antSrsC0=./usecase/cat_b/mu1_100mhz/ant_0.bin
+antSrsC1=./usecase/cat_b/mu1_100mhz/ant_1.bin
+antSrsC2=./usecase/cat_b/mu1_100mhz/ant_2.bin
+antSrsC3=./usecase/cat_b/mu1_100mhz/ant_3.bin
+antSrsC4=./usecase/cat_b/mu1_100mhz/ant_4.bin
+antSrsC5=./usecase/cat_b/mu1_100mhz/ant_5.bin
+antSrsC6=./usecase/cat_b/mu1_100mhz/ant_6.bin
+antSrsC7=./usecase/cat_b/mu1_100mhz/ant_7.bin
+antSrsC8=./usecase/cat_b/mu1_100mhz/ant_0.bin
+antSrsC9=./usecase/cat_b/mu1_100mhz/ant_1.bin
+antSrsC10=./usecase/cat_b/mu1_100mhz/ant_2.bin
+antSrsC11=./usecase/cat_b/mu1_100mhz/ant_3.bin
+antSrsC12=./usecase/cat_b/mu1_100mhz/ant_4.bin
+antSrsC13=./usecase/cat_b/mu1_100mhz/ant_5.bin
+antSrsC14=./usecase/cat_b/mu1_100mhz/ant_6.bin
+antSrsC15=./usecase/cat_b/mu1_100mhz/ant_7.bin
+antSrsC16=./usecase/cat_b/mu1_100mhz/ant_0.bin
+antSrsC17=./usecase/cat_b/mu1_100mhz/ant_1.bin
+antSrsC18=./usecase/cat_b/mu1_100mhz/ant_2.bin
+antSrsC19=./usecase/cat_b/mu1_100mhz/ant_3.bin
+antSrsC20=./usecase/cat_b/mu1_100mhz/ant_4.bin
+antSrsC21=./usecase/cat_b/mu1_100mhz/ant_5.bin
+antSrsC22=./usecase/cat_b/mu1_100mhz/ant_6.bin
+antSrsC23=./usecase/cat_b/mu1_100mhz/ant_7.bin
+antSrsC24=./usecase/cat_b/mu1_100mhz/ant_0.bin
+antSrsC25=./usecase/cat_b/mu1_100mhz/ant_1.bin
+antSrsC26=./usecase/cat_b/mu1_100mhz/ant_2.bin
+antSrsC27=./usecase/cat_b/mu1_100mhz/ant_3.bin
+antSrsC28=./usecase/cat_b/mu1_100mhz/ant_4.bin
+antSrsC29=./usecase/cat_b/mu1_100mhz/ant_5.bin
+antSrsC30=./usecase/cat_b/mu1_100mhz/ant_6.bin
+antSrsC31=./usecase/cat_b/mu1_100mhz/ant_7.bin
 
 ###########################################################
 ##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+max_sections_per_slot=8
+max_sections_per_symbol=8
 
 nPrbElemDl=8
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
+# weight base beams
 PrbElemDl0=0,36,0,14,1,1,1,9,1
 PrbElemDl1=36,36,0,14,2,1,1,9,1
 PrbElemDl2=72,36,0,14,3,1,1,9,1
@@ -167,7 +169,7 @@ PrbElemDl7=252,21,0,14,8,1,1,9,1
 
 nPrbElemUl=8
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
+# weight base beams
 PrbElemUl0=0,36,0,14,1,1,1,9,1
 PrbElemUl1=36,36,0,14,2,1,1,9,1
 PrbElemUl2=72,36,0,14,3,1,1,9,1
@@ -209,8 +211,8 @@ T2a_min_up=71  # 71.35in us
 T2a_max_up=428 # 428.12us
 
 #Transmission Window
-Ta3_min=20 # in us 
-Ta3_max=32 # in us 
+Ta3_min=20 # in us
+Ta3_max=32 # in us
 
 ###########################################################
 ##O-DU Settings
@@ -229,7 +231,7 @@ T1a_min_up=96  #71 + 25 us
 T1a_max_up=196 #71 + 25 us
 
 #Reception Window
-Ta4_min=0  # in us 
-Ta4_max=75 # in us 
+Ta4_min=0  # in us
+Ta4_max=75 # in us
 ###########################################################