X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fcat_b%2Fmu1_100mhz%2F1%2Fconfig_file_o_du.dat;fp=fhi_lib%2Fapp%2Fusecase%2Fcat_b%2Fmu1_100mhz%2F1%2Fconfig_file_o_du.dat;h=395cc779abbcee06f88d3bad3c680c5ab67901d8;hp=d0ca6d688ea31cf8534a3d0b243d25d0a02075b6;hb=2de97529a4c5a1922214ba0e6f0fb84cacbd0bc7;hpb=81a09690b36b3a4e89b4dae34f30933de13f7f90

diff --git a/fhi_lib/app/usecase/cat_b/mu1_100mhz/1/config_file_o_du.dat b/fhi_lib/app/usecase/cat_b/mu1_100mhz/1/config_file_o_du.dat
index d0ca6d6..395cc77 100644
--- a/fhi_lib/app/usecase/cat_b/mu1_100mhz/1/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/cat_b/mu1_100mhz/1/config_file_o_du.dat
@@ -22,12 +22,12 @@ instanceId=0 # 0,1,2,... in case more than 1 application started on the same sys
 appMode=0 # O-DU(0) | O-RU(1)
 xranMode=1 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in O-RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
-antNumUL=4 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B 
+antNum=8 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
+antNumUL=4 # Cat B: UL Number of Antennas per CC (default: 8) or number of UL Digital streams for Category B
 antElmTRx=32 #number of Antenna Elements for Cat B default 32T32R
 
 #UEs
-muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources    
+muMimoUEs=8 #number of UEs serviced by MU-MIMO system. Number of independent beams within the same Freq/Time resources
 DlLayersPerUe=1 #number of RX anntennas on DL UE side
 UlLayersPerUe=1 #number of TX anntennas on UL UE side
 
@@ -57,12 +57,12 @@ sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
 Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
 
-ioCore=5        # core id 
+ioCore=5        # core id
 ioWorker=0x2000000 # mask 0-no workers
 
 # Eth 0
@@ -77,7 +77,7 @@ ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
 duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
 
-numSlots=10 #number of slots per IQ files
+numSlots=20 #number of slots per IQ files
 antC0=./usecase/cat_b/mu1_100mhz/ant_0.bin   #CC0
 antC1=./usecase/cat_b/mu1_100mhz/ant_1.bin   #CC0
 antC2=./usecase/cat_b/mu1_100mhz/ant_2.bin   #CC0
@@ -118,16 +118,18 @@ UlBfwUe7=./usecase/cat_b/mu1_100mhz/ul_bfw_ue_7.bin   #UE7 weights for TRX anten
 rachEanble=0 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=189
 
-srsEanble=1 # Enable (1)| disable (0) SRS 
+srsEanble=1 # Enable (1)| disable (0) SRS
 srsSym=8192 # (1<<13) symbol used for SRS (def: sym 13)
 
 ###########################################################
 ##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+max_sections_per_slot=8
+max_sections_per_symbol=8
 
 nPrbElemDl=8
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
+# weight base beams
 PrbElemDl0=0,36,0,14,1,1,1,9,1
 PrbElemDl1=36,36,0,14,2,1,1,9,1
 PrbElemDl2=72,36,0,14,3,1,1,9,1
@@ -137,9 +139,20 @@ PrbElemDl5=180,36,0,14,6,1,1,9,1
 PrbElemDl6=216,36,0,14,7,1,1,9,1
 PrbElemDl7=252,21,0,14,8,1,1,9,1
 
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
+ExtBfwDl0=12,3,0,0,9,1
+ExtBfwDl1=12,3,0,0,9,1
+ExtBfwDl2=12,3,0,0,9,1
+ExtBfwDl3=12,3,0,0,9,1
+ExtBfwDl4=12,3,0,0,9,1
+ExtBfwDl5=12,3,0,0,9,1
+ExtBfwDl6=12,3,0,0,9,1
+ExtBfwDl7=7,3,0,0,9,1
+
 nPrbElemUl=8
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
+# weight base beams
 PrbElemUl0=0,36,0,14,1,1,1,9,1
 PrbElemUl1=36,36,0,14,2,1,1,9,1
 PrbElemUl2=72,36,0,14,3,1,1,9,1
@@ -149,6 +162,16 @@ PrbElemUl5=180,36,0,14,6,1,1,9,1
 PrbElemUl6=216,36,0,14,7,1,1,9,1
 PrbElemUl7=252,21,0,14,8,1,1,9,1
 
+# Extension Parameters for Beamforming weights
+# numBundPrb, numSetBFW, RAD, disableBFW, bfwIqWidth, bfwCompMeth
+ExtBfwUl0=12,3,0,0,9,1
+ExtBfwUl1=12,3,0,0,9,1
+ExtBfwUl2=12,3,0,0,9,1
+ExtBfwUl3=12,3,0,0,9,1
+ExtBfwUl4=12,3,0,0,9,1
+ExtBfwUl5=12,3,0,0,9,1
+ExtBfwUl6=12,3,0,0,9,1
+ExtBfwUl7=7,3,0,0,9,1
 ###########################################################
 
 ## control of IQ byte order
@@ -181,8 +204,8 @@ T2a_min_up=71  # 71.35in us
 T2a_max_up=428 # 428.12us
 
 #Transmission Window
-Ta3_min=20 # in us 
-Ta3_max=32 # in us 
+Ta3_min=20 # in us
+Ta3_max=32 # in us
 
 ###########################################################
 ##O-DU Settings
@@ -201,7 +224,7 @@ T1a_min_up=96  #71 + 25 us
 T1a_max_up=196 #71 + 25 us
 
 #Reception Window
-Ta4_min=0  # in us 
-Ta4_max=75 # in us 
+Ta4_min=0  # in us
+Ta4_max=75 # in us
 ###########################################################