X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fcat_a%2Fmu3_100mhz%2F201%2Fmu1_config_file_o_du.dat;fp=fhi_lib%2Fapp%2Fusecase%2Fmu1_100mhz%2Fconfig_file_o_du.dat;h=1b1fb0983b04432f594340da504c64a68df00577;hp=9b30773b17ba46566585ec5e802dbb95b619bd05;hb=2de97529a4c5a1922214ba0e6f0fb84cacbd0bc7;hpb=81a09690b36b3a4e89b4dae34f30933de13f7f90

diff --git a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat b/fhi_lib/app/usecase/cat_a/mu3_100mhz/201/mu1_config_file_o_du.dat
similarity index 80%
rename from fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
rename to fhi_lib/app/usecase/cat_a/mu3_100mhz/201/mu1_config_file_o_du.dat
index 9b30773..1b1fb09 100644
--- a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/cat_a/mu3_100mhz/201/mu1_config_file_o_du.dat
@@ -22,7 +22,7 @@ instanceId=0 # 0,1,2,... in case more than 1 application started on the same sys
 appMode=0 # O-DU(0) | RU(1)
 xranMode=0 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
+antNum=2 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
 
 ##Numerology
 mu=1 #30Khz Sub Carrier Spacing
@@ -49,7 +49,7 @@ sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
 Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
@@ -67,35 +67,37 @@ ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
 duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
 
-numSlots=40 #number of slots per IQ files
-antC0=./usecase/mu1_100mhz/ant_0.bin   #CC0
-antC1=./usecase/mu1_100mhz/ant_1.bin   #CC0
-antC2=./usecase/mu1_100mhz/ant_2.bin   #CC0
-antC3=./usecase/mu1_100mhz/ant_3.bin   #CC0
-antC4=./usecase/mu1_100mhz/ant_4.bin   #CC1
-antC5=./usecase/mu1_100mhz/ant_5.bin   #CC1
-antC6=./usecase/mu1_100mhz/ant_6.bin   #CC1
-antC7=./usecase/mu1_100mhz/ant_7.bin   #CC1
-antC8=./usecase/mu1_100mhz/ant_8.bin   #CC2
-antC9=./usecase/mu1_100mhz/ant_9.bin   #CC2
-antC10=./usecase/mu1_100mhz/ant_10.bin #CC2
-antC11=./usecase/mu1_100mhz/ant_11.bin #CC2
-antC12=./usecase/mu1_100mhz/ant_12.bin #CC3
-antC13=./usecase/mu1_100mhz/ant_13.bin #CC3
-antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
-antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
+numSlots=20 #number of slots per IQ files
+antC0=./usecase/cat_a/mu1_100mhz/ant_0.bin   #CC0
+antC1=./usecase/cat_a/mu1_100mhz/ant_1.bin   #CC0
+antC2=./usecase/cat_a/mu1_100mhz/ant_2.bin   #CC0
+antC3=./usecase/cat_a/mu1_100mhz/ant_3.bin   #CC0
+antC4=./usecase/cat_a/mu1_100mhz/ant_4.bin   #CC1
+antC5=./usecase/cat_a/mu1_100mhz/ant_5.bin   #CC1
+antC6=./usecase/cat_a/mu1_100mhz/ant_6.bin   #CC1
+antC7=./usecase/cat_a/mu1_100mhz/ant_7.bin   #CC1
+antC8=./usecase/cat_a/mu1_100mhz/ant_8.bin   #CC2
+antC9=./usecase/cat_a/mu1_100mhz/ant_9.bin   #CC2
+antC10=./usecase/cat_a/mu1_100mhz/ant_10.bin #CC2
+antC11=./usecase/cat_a/mu1_100mhz/ant_11.bin #CC2
+antC12=./usecase/cat_a/mu1_100mhz/ant_12.bin #CC3
+antC13=./usecase/cat_a/mu1_100mhz/ant_13.bin #CC3
+antC14=./usecase/cat_a/mu1_100mhz/ant_14.bin #CC3
+antC15=./usecase/cat_a/mu1_100mhz/ant_15.bin #CC3
 
 rachEanble=1 # Enable (1)| disable (0) PRACH configuration
-prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+prachConfigIndex=159 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
 
 ###########################################################
 ##Section Settings
-DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
+max_sections_per_slot=8
+max_sections_per_symbol=8
 
-nPrbElemDl=8
+nPrbElemDl=1
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
-PrbElemDl0=0,36,0,14,1,1,0,16,1
+# weight base beams
+PrbElemDl0=0,273,0,14,0,0,0,16,0
 PrbElemDl1=36,36,0,14,2,1,0,16,1
 PrbElemDl2=72,36,0,14,3,1,0,16,1
 PrbElemDl3=108,36,0,14,4,1,0,16,1
@@ -105,11 +107,11 @@ PrbElemDl6=216,36,0,14,7,1,0,16,1
 PrbElemDl7=252,21,0,14,8,1,0,16,1
 
 
-nPrbElemUl=8
+nPrbElemUl=2
 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
-# weight base beams 
-PrbElemUl0=0,36,0,14,1,1,0,16,1
-PrbElemUl1=36,36,0,14,2,1,0,16,1
+# weight base beams
+PrbElemUl0=0,136,0,14,0,0,0,16,0
+PrbElemUl1=136,137,0,14,0,0,0,16,0
 PrbElemUl2=72,36,0,14,3,1,0,16,1
 PrbElemUl3=108,36,0,14,4,1,0,16,1
 PrbElemUl4=144,36,0,14,5,1,0,16,1
@@ -148,8 +150,8 @@ T2a_min_up=71  # 71.35in us
 T2a_max_up=428 # 428.12us
 
 #Transmission Window
-Ta3_min=20 # in us 
-Ta3_max=32 # in us 
+Ta3_min=20 # in us
+Ta3_max=32 # in us
 
 ###########################################################
 ##O-DU Settings
@@ -168,7 +170,7 @@ T1a_min_up=96  #71 + 25 us
 T1a_max_up=196 #71 + 25 us
 
 #Reception Window
-Ta4_min=0  # in us 
-Ta4_max=75 # in us 
+Ta4_min=0  # in us
+Ta4_max=75 # in us
 ###########################################################