X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fcat_a%2Fmu3_100mhz%2F101%2Fconfig_file_o_du.dat;fp=fhi_lib%2Fapp%2Fusecase%2Fmu3_100mhz%2F101%2Fconfig_file_o_du.dat;h=75f9e50531ff5e984303fc3bd02b0b4edfad54c1;hp=5ac3018fa9c49ce3f54e5af129d8c74b5dd77485;hb=2de97529a4c5a1922214ba0e6f0fb84cacbd0bc7;hpb=81a09690b36b3a4e89b4dae34f30933de13f7f90

diff --git a/fhi_lib/app/usecase/mu3_100mhz/101/config_file_o_du.dat b/fhi_lib/app/usecase/cat_a/mu3_100mhz/101/config_file_o_du.dat
similarity index 79%
rename from fhi_lib/app/usecase/mu3_100mhz/101/config_file_o_du.dat
rename to fhi_lib/app/usecase/cat_a/mu3_100mhz/101/config_file_o_du.dat
index 5ac3018..75f9e50 100644
--- a/fhi_lib/app/usecase/mu3_100mhz/101/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/cat_a/mu3_100mhz/101/config_file_o_du.dat
@@ -22,7 +22,7 @@ instanceId=0 # 0,1,2,... in case more than 1 application started on the same sys
 appMode=0 # lls-CU(0) | RU(1)
 xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=2 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
+antNum=2 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
 
 ##Numerology
 mu=3 #mmWave 120Khz Sub Carrier Spacing
@@ -48,7 +48,7 @@ sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
 #sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 #sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
 Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
@@ -68,23 +68,23 @@ ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
 
 maxFrameId=99 # set for compatibility with O-RU
 
-numSlots=40 #number of slots per IQ files
-antC0=./usecase/mu3_100mhz/ant_0.bin   #CC0
-antC1=./usecase/mu3_100mhz/ant_1.bin   #CC0
-antC2=./usecase/mu3_100mhz/ant_2.bin   #CC0
-antC3=./usecase/mu3_100mhz/ant_3.bin   #CC0
-antC4=./usecase/mu3_100mhz/ant_4.bin   #CC1
-antC5=./usecase/mu3_100mhz/ant_5.bin   #CC1
-antC6=./usecase/mu3_100mhz/ant_6.bin   #CC1
-antC7=./usecase/mu3_100mhz/ant_7.bin   #CC1
-antC8=./usecase/mu3_100mhz/ant_8.bin   #CC2
-antC9=./usecase/mu3_100mhz/ant_9.bin   #CC2
-antC10=./usecase/mu3_100mhz/ant_10.bin #CC2
-antC11=./usecase/mu3_100mhz/ant_11.bin #CC2
-antC12=./usecase/mu3_100mhz/ant_12.bin #CC3
-antC13=./usecase/mu3_100mhz/ant_13.bin #CC3
-antC14=./usecase/mu3_100mhz/ant_14.bin #CC3
-antC15=./usecase/mu3_100mhz/ant_15.bin #CC3
+numSlots=20 #number of slots per IQ files
+antC0=./usecase/cat_a/mu3_100mhz/ant_0.bin   #CC0
+antC1=./usecase/cat_a/mu3_100mhz/ant_1.bin   #CC0
+antC2=./usecase/cat_a/mu3_100mhz/ant_2.bin   #CC0
+antC3=./usecase/cat_a/mu3_100mhz/ant_3.bin   #CC0
+antC4=./usecase/cat_a/mu3_100mhz/ant_4.bin   #CC1
+antC5=./usecase/cat_a/mu3_100mhz/ant_5.bin   #CC1
+antC6=./usecase/cat_a/mu3_100mhz/ant_6.bin   #CC1
+antC7=./usecase/cat_a/mu3_100mhz/ant_7.bin   #CC1
+antC8=./usecase/cat_a/mu3_100mhz/ant_8.bin   #CC2
+antC9=./usecase/cat_a/mu3_100mhz/ant_9.bin   #CC2
+antC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
+antC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
+antC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
+antC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
+antC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
+antC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
 rachEanble=1 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=81
 
@@ -104,43 +104,43 @@ u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
 ##RU Settings
 totalBFWeights=32 # Total number of Beamforming Weights on RU
 
-Tadv_cp_dl=63 #in us  TODO: update per RU implementation
+Tadv_cp_dl=25 #in us  TODO: update per RU implementation
               #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
 
 #Reception Window C-plane DL
-T2a_min_cp_dl=116 #in us  
-T2a_max_cp_dl=327 #in us 
+T2a_min_cp_dl=50 #in us
+T2a_max_cp_dl=140 #in us
 
 #Reception Window C-plane UL
-T2a_min_cp_ul=63 #in us  
-T2a_max_cp_ul=274 #in us 
+T2a_min_cp_ul=50 #in us
+T2a_max_cp_ul=140 #in us
 
 #Reception Window U-plane
-T2a_min_up=53 #in us
-T2a_max_up=264 #in us
+T2a_min_up=25 #in us
+T2a_max_up=70 #in us
 
 #Transmission Window
 Ta3_min=20 #in us
-Ta3_max=90 #in us
+Ta3_max=32 #in us
 
 ###########################################################
 ##lls-CU Settings
 #C-plane
 #Transmission Window Fast C-plane DL
-T1a_min_cp_dl=276
-T1a_max_cp_dl=327
+T1a_min_cp_dl=70
+T1a_max_cp_dl=100
 
 ##Transmission Window Fast C-plane UL
-T1a_min_cp_ul=223
-T1a_max_cp_ul=274
+T1a_min_cp_ul=60
+T1a_max_cp_ul=70
 
 #U-plane
 ##Transmission Window
-T1a_min_up=213
-T1a_max_up=264
+T1a_min_up=35
+T1a_max_up=50
 
 #Reception Window
-Ta4_min=20
-Ta4_max=250
+Ta4_min=0
+Ta4_max=45
 ###########################################################