X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fcat_a%2Fmu0_20mhz%2F23%2Fconfig_file_o_ru.dat;fp=fhi_lib%2Fapp%2Fusecase%2Fmu0_20mhz%2Fconfig_file_o_ru.dat;h=0aed8c8776d27d956880e0664187dbba3aaf58b9;hp=d5b3d5d89e304df995a37eba9548e89af6d1f586;hb=2de97529a4c5a1922214ba0e6f0fb84cacbd0bc7;hpb=81a09690b36b3a4e89b4dae34f30933de13f7f90

diff --git a/fhi_lib/app/usecase/mu0_20mhz/config_file_o_ru.dat b/fhi_lib/app/usecase/cat_a/mu0_20mhz/23/config_file_o_ru.dat
similarity index 76%
rename from fhi_lib/app/usecase/mu0_20mhz/config_file_o_ru.dat
rename to fhi_lib/app/usecase/cat_a/mu0_20mhz/23/config_file_o_ru.dat
index d5b3d5d..0aed8c8 100644
--- a/fhi_lib/app/usecase/mu0_20mhz/config_file_o_ru.dat
+++ b/fhi_lib/app/usecase/cat_a/mu0_20mhz/23/config_file_o_ru.dat
@@ -22,7 +22,7 @@ instanceId=1 # 0,1,2,... in case more than 1 application started on the same sys
 appMode=1 # O-DU(0) | O-RU(1)
 xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
 
 ##Numerology
 mu=0 #15Khz Sub Carrier Spacing
@@ -37,7 +37,7 @@ nULFftSize=2048
 nFrameDuplexType=0 # 0 - FDD 1 - TDD
 nTddPeriod=0 #TDD priod e.g. DDDS 4
 
-MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
+MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
 Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
 Gps_Beta=0
@@ -56,33 +56,33 @@ duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
 
 
-numSlots=40 #number of slots per IQ files
-antC0=./usecase/mu0_20mhz/ant_0.bin   #CC0
-antC1=./usecase/mu0_20mhz/ant_1.bin   #CC0
-antC2=./usecase/mu0_20mhz/ant_2.bin   #CC0
-antC3=./usecase/mu0_20mhz/ant_3.bin   #CC0
-antC4=./usecase/mu0_20mhz/ant_4.bin   #CC1
-antC5=./usecase/mu0_20mhz/ant_5.bin   #CC1
-antC6=./usecase/mu0_20mhz/ant_6.bin   #CC1
-antC7=./usecase/mu0_20mhz/ant_7.bin   #CC1
-antC8=./usecase/mu0_20mhz/ant_8.bin   #CC2
-antC9=./usecase/mu0_20mhz/ant_9.bin   #CC2
-antC10=./usecase/mu0_20mhz/ant_10.bin #CC2
-antC11=./usecase/mu0_20mhz/ant_11.bin #CC2
-antC12=./usecase/mu0_20mhz/ant_12.bin #CC3
-antC13=./usecase/mu0_20mhz/ant_13.bin #CC3
-antC14=./usecase/mu0_20mhz/ant_14.bin #CC3
-antC15=./usecase/mu0_20mhz/ant_15.bin #CC3
+numSlots=20 #number of slots per IQ files
+antC0=./usecase/cat_a/mu0_20mhz/ant_0.bin   #CC0
+antC1=./usecase/cat_a/mu0_20mhz/ant_1.bin   #CC0
+antC2=./usecase/cat_a/mu0_20mhz/ant_2.bin   #CC0
+antC3=./usecase/cat_a/mu0_20mhz/ant_3.bin   #CC0
+antC4=./usecase/cat_a/mu0_20mhz/ant_4.bin   #CC1
+antC5=./usecase/cat_a/mu0_20mhz/ant_5.bin   #CC1
+antC6=./usecase/cat_a/mu0_20mhz/ant_6.bin   #CC1
+antC7=./usecase/cat_a/mu0_20mhz/ant_7.bin   #CC1
+antC8=./usecase/cat_a/mu0_20mhz/ant_8.bin   #CC2
+antC9=./usecase/cat_a/mu0_20mhz/ant_9.bin   #CC2
+antC10=./usecase/cat_a/mu0_20mhz/ant_10.bin #CC2
+antC11=./usecase/cat_a/mu0_20mhz/ant_11.bin #CC2
+antC12=./usecase/cat_a/mu0_20mhz/ant_12.bin #CC3
+antC13=./usecase/cat_a/mu0_20mhz/ant_13.bin #CC3
+antC14=./usecase/cat_a/mu0_20mhz/ant_14.bin #CC3
+antC15=./usecase/cat_a/mu0_20mhz/ant_15.bin #CC3
 
 ## RACH TODO: update for PRACH
-rachEanble=1 # Enable (1)| disable (0) PRACH configuration
+rachEanble=0 # Enable (1)| disable (0) PRACH configuration
 #rachOffset=43 # RB offset for prach detection (see RIU spec)
 prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
 
-antPrachC0=./usecase/mu0_20mhz/ant_0.bin
-antPrachC1=./usecase/mu0_20mhz/ant_1.bin
-antPrachC2=./usecase/mu0_20mhz/ant_2.bin
-antPrachC3=./usecase/mu0_20mhz/ant_3.bin
+antPrachC0=./usecase/cat_a/mu0_20mhz/ant_0.bin
+antPrachC1=./usecase/cat_a/mu0_20mhz/ant_1.bin
+antPrachC2=./usecase/cat_a/mu0_20mhz/ant_2.bin
+antPrachC3=./usecase/cat_a/mu0_20mhz/ant_3.bin
 
 
 ## control of IQ byte order
@@ -105,20 +105,20 @@ Tadv_cp_dl=25 #in us  TODO: update per RU implementation
               #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
 
 #Reception Window C-plane DL
-T2a_min_cp_dl=400  #in us  
-T2a_max_cp_dl=1120 #in us 
+T2a_min_cp_dl=400  #in us
+T2a_max_cp_dl=850 #in us
 
 #Reception Window C-plane UL
-T2a_min_cp_ul=400 #in us  
-T2a_max_cp_ul=1120 #in us 
+T2a_min_cp_ul=400 #in us
+T2a_max_cp_ul=850 #in us
 
 #Reception Window U-plane
 T2a_min_up=200  # in us
-T2a_max_up=1120 # in us
+T2a_max_up=800 # in us
 
 #Transmission Window
-Ta3_min=160 #in us
-Ta3_max=256 #in us
+Ta3_min=100 #in us
+Ta3_max=140 #in us
 
 ###########################################################
 ##lls-CU Settings
@@ -138,6 +138,6 @@ T1a_max_up=400
 
 #Reception Window
 Ta4_min=0
-Ta4_max=360
+Ta4_max=200
 ###########################################################