X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=o-du%2Fphy.git;a=blobdiff_plain;f=fhi_lib%2Fapp%2Fconfig_file_ru.dat;fp=fhi_lib%2Fapp%2Fconfig_file_ru.dat;h=0000000000000000000000000000000000000000;hp=d1edf904ec0f6a467bb27e965e2dfdb698021539;hb=cef07f74965b1749dd909fc1322e211489fea2ea;hpb=bc60e3a69129edf1c21a01683f84a77483f6e3cc

diff --git a/fhi_lib/app/config_file_ru.dat b/fhi_lib/app/config_file_ru.dat
deleted file mode 100644
index d1edf90..0000000
--- a/fhi_lib/app/config_file_ru.dat
+++ /dev/null
@@ -1,92 +0,0 @@
-#######################################################################
-#
-# <COPYRIGHT_TAG>
-#
-#######################################################################
-
-# This is simple configuration file. Use '#' sign for comments
-appMode=1 # lls-CU(0) | RU(1)
-xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-##Numerology
-mu=3 #mmWave 120Khz Sub Carrier Spacing
-antNum=4 # Number of Antennas per CC (default: 4)
-ttiPeriod=125 # in us TTI period (mmWave default 125us)
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-#llsCUMac=3c:fd:fe:9e:93:68 # PF for tcpdump
-ruMac=00:11:22:33:44:55
-#56:1e:4b:0c:f5:9b # RU MAC
-antC0=./ant_0.bin   #CC0
-antC1=./ant_1.bin   #CC0
-antC2=./ant_2.bin   #CC0
-antC3=./ant_3.bin   #CC0
-antC4=./ant_4.bin   #CC1
-antC5=./ant_5.bin   #CC1
-antC6=./ant_6.bin   #CC1
-antC7=./ant_7.bin   #CC1
-antC8=./ant_8.bin   #CC2
-antC9=./ant_9.bin   #CC2
-antC10=./ant_10.bin #CC2
-antC11=./ant_11.bin #CC2
-antC12=./ant_12.bin #CC3
-antC13=./ant_13.bin #CC3
-antC14=./ant_14.bin #CC3
-antC15=./ant_15.bin #CC3
-
-## RACH TODO: update for PRACH
-#rachEanble=1 # Enable (1)| disable (0) PRACH configuration
-#rachOffset=43 # RB offset for prach detection (see RIU spec)
-#rachCfgIdx=14 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
-
-## control of IQ byte order
-iqswap=0 #do swap of IQ before send buffer to eth
-nebyteorderswap=0 #do swap of byte order for each I and Q from CPU byte order to network byte order
-
-##Debug
-debugStop=0 #stop app on 1pps boundary (gps_second % 30)
-
-CPenable=0 #(1) C-Plane is enabled| 0 C-Plane is disabled
-c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
-u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
-
-##RU Settings
-Tadv_cp_dl=25 #in us  TODO: update per RU implementation
-              #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
-
-#Reception Window C-plane DL
-T2a_min_cp_dl=50 #in us  TODO: update per RU implementation
-T2a_max_cp_dl=140 #in us  TODO: update per RU implementation
-
-#Reception Window C-plane UL
-T2a_min_cp_ul=50 #in us  TODO: update per RU implementation
-T2a_max_cp_ul=140 #in us  TODO: update per RU implementation
-
-#Reception Window U-plane
-T2a_min_up=25 #in us
-T2a_max_up=140 #in us
-
-#Transmission Window
-Ta3_min=20 #in us
-Ta3_max=32 #in us
-
-###########################################################
-##lls-CU Settings
-#C-plane
-#Transmission Window Fast C-plane DL
-T1a_min_cp_dl=70
-T1a_max_cp_dl=100
-
-##Transmission Window Fast C-plane UL
-T1a_min_cp_ul=70
-T1a_max_cp_ul=80
-
-#U-plane
-##Transmission Window
-T1a_min_up=35
-T1a_max_up=50
-
-#Reception Window
-Ta4_min=10
-Ta4_max=100
-###########################################################
-