#######################################################################
#
# <COPYRIGHT_TAG>
#
#######################################################################

# This is simple configuration file. Use '#' sign for comments
appMode=1 # lls-CU(0) | RU(1)
xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
##Numerology
mu=3 #mmWave 120Khz Sub Carrier Spacing
antNum=4 # Number of Antennas per CC (default: 4)
ttiPeriod=125 # in us TTI period (mmWave default 125us)
llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
#llsCUMac=3c:fd:fe:9e:93:68 # PF for tcpdump
ruMac=00:11:22:33:44:55
#56:1e:4b:0c:f5:9b # RU MAC
antC0=./ant_0.bin   #CC0
antC1=./ant_1.bin   #CC0
antC2=./ant_2.bin   #CC0
antC3=./ant_3.bin   #CC0
antC4=./ant_4.bin   #CC1
antC5=./ant_5.bin   #CC1
antC6=./ant_6.bin   #CC1
antC7=./ant_7.bin   #CC1
antC8=./ant_8.bin   #CC2
antC9=./ant_9.bin   #CC2
antC10=./ant_10.bin #CC2
antC11=./ant_11.bin #CC2
antC12=./ant_12.bin #CC3
antC13=./ant_13.bin #CC3
antC14=./ant_14.bin #CC3
antC15=./ant_15.bin #CC3

## RACH TODO: update for PRACH
#rachEanble=1 # Enable (1)| disable (0) PRACH configuration
#rachOffset=43 # RB offset for prach detection (see RIU spec)
#rachCfgIdx=14 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index

## control of IQ byte order
iqswap=0 #do swap of IQ before send buffer to eth
nebyteorderswap=0 #do swap of byte order for each I and Q from CPU byte order to network byte order

##Debug
debugStop=0 #stop app on 1pps boundary (gps_second % 30)

CPenable=0 #(1) C-Plane is enabled| 0 C-Plane is disabled
c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
u_plane_vlan_tag=2 #VLAN Tag used for U-Plane

##RU Settings
Tadv_cp_dl=25 #in us  TODO: update per RU implementation
              #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages

#Reception Window C-plane DL
T2a_min_cp_dl=50 #in us  TODO: update per RU implementation
T2a_max_cp_dl=140 #in us  TODO: update per RU implementation

#Reception Window C-plane UL
T2a_min_cp_ul=50 #in us  TODO: update per RU implementation
T2a_max_cp_ul=140 #in us  TODO: update per RU implementation

#Reception Window U-plane
T2a_min_up=25 #in us
T2a_max_up=140 #in us

#Transmission Window
Ta3_min=20 #in us
Ta3_max=32 #in us

###########################################################
##lls-CU Settings
#C-plane
#Transmission Window Fast C-plane DL
T1a_min_cp_dl=70
T1a_max_cp_dl=100

##Transmission Window Fast C-plane UL
T1a_min_cp_ul=70
T1a_max_cp_ul=80

#U-plane
##Transmission Window
T1a_min_up=35
T1a_max_up=50

#Reception Window
Ta4_min=10
Ta4_max=100
###########################################################