X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?p=it%2Fotf.git;a=blobdiff_plain;f=dmaap-vth%2FJenkinsfile;fp=dmaap-vth%2FJenkinsfile;h=dfb3067c29c32ceae3b2a19629b57a9f9ba6814e;hp=0000000000000000000000000000000000000000;hb=e3ba96506390ab3ad630d2dfc4967fd49527615d;hpb=c6475102d3d75ea00d5be548492eba544cf4f535

diff --git a/dmaap-vth/Jenkinsfile b/dmaap-vth/Jenkinsfile
new file mode 100644
index 0000000..dfb3067
--- /dev/null
+++ b/dmaap-vth/Jenkinsfile
@@ -0,0 +1,162 @@
+#!/usr/bin/env groovy
+
+/*  Copyright (c) 2019 AT&T Intellectual Property.                             #
+#                                                                              #
+#   Licensed under the Apache License, Version 2.0 (the "License");            #
+#   you may not use this file except in compliance with the License.           #
+#   You may obtain a copy of the License at                                    #
+#                                                                              #
+#       http://www.apache.org/licenses/LICENSE-2.0                             #
+#                                                                              #
+#   Unless required by applicable law or agreed to in writing, software        #
+#   distributed under the License is distributed on an "AS IS" BASIS,          #
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
+#   See the License for the specific language governing permissions and        #
+#   limitations under the License.                                             #
+##############################################################################*/
+
+properties([[$class: 'ParametersDefinitionProperty', parameterDefinitions: [
+        [$class: 'hudson.model.StringParameterDefinition', name: 'PHASE', defaultValue: "BUILD"],
+        [$class: 'hudson.model.StringParameterDefinition', name: 'ENV', defaultValue: "dev"],
+        [$class: 'hudson.model.StringParameterDefinition', name: 'MECHID', defaultValue: "id_otf_dev"],
+        [$class: 'hudson.model.StringParameterDefinition', name: 'KUBE_CONFIG', defaultValue: "kubeConfig-dev"],
+        [$class: 'hudson.model.StringParameterDefinition', name: 'TILLER_NAMESPACE', defaultValue: "org-oran-otf"]
+]]])
+
+
+echo "Build branch: ${env.BRANCH_NAME}"
+
+node("docker"){
+	stage 'Checkout'
+	checkout scm
+	PHASES=PHASE.tokenize( '_' );
+	echo "PHASES : " + PHASES
+
+
+	ARTIFACT_ID="dmaap-vth";
+	VERSION="0.0.1-SNAPSHOT";
+	NAMESPACE="org-oran-otf"
+	DOCKER_REGISTRY="registry.hub.docker.io"
+
+  if( ENV.equalsIgnoreCase("dev") ){
+    IMAGE_NAME=DOCKER_REGISTRY + "/" + NAMESPACE + ".dev" + "/" + ARTIFACT_ID +  ":" + VERSION
+
+  }
+  if( ENV.equalsIgnoreCase("prod") || ENV.equalsIgnoreCase("prod-dr")){
+    IMAGE_NAME=DOCKER_REGISTRY + "/" + NAMESPACE + ".prod" + "/" + ARTIFACT_ID +  ":" + VERSION
+
+  }
+
+  if( ENV.equalsIgnoreCase("st") ){
+    IMAGE_NAME=DOCKER_REGISTRY + "/" + NAMESPACE + ".st" + "/" + ARTIFACT_ID +  ":" + VERSION
+
+  }
+
+	echo "Artifact: " + IMAGE_NAME
+
+	withEnv(["PATH=${env.PATH}:${env.WORKSPACE}/linux-amd64", "HELM_HOME=${env.WORKSPACE}"]) {
+
+		echo "PATH=${env.PATH}"
+		echo "HELM_HOME=${env.HELM_HOME}"
+
+		if (PHASES.contains("BUILD")){
+
+			stage 'Publish Artifact'
+
+				withCredentials([usernamePassword(credentialsId: MECHID, usernameVariable: 'USERNAME', passwordVariable: 'PASSWORD')]) {
+					dir("dmaap-vth")
+						echo "Artifact: " + IMAGE_NAME
+
+						sh """
+							docker login $DOCKER_REGISTRY --username $USERNAME --password $PASSWORD
+							docker build -t $IMAGE_NAME .
+							docker push $IMAGE_NAME
+						"""
+				}
+
+		}
+
+		if (PHASES.contains("DEPLOY") || PHASES.contains("UNDEPLOY")) {
+
+			stage 'Init Helm'
+
+			//check if helm exists if not install
+			if(fileExists('linux-amd64/helm')){
+				sh """
+					echo "helm is already installed"
+				"""
+			}
+			else{
+			//download helm
+				sh """
+					echo "installing helm"
+					wget  https://storage.googleapis.com/kubernetes-helm/helm-v2.14.3-linux-amd64.tar.gz
+					tar -xf helm-v2.14.3-linux-amd64.tar.gz
+					rm helm-v2.14.3-linux-amd64.tar.gz
+				"""
+			}
+
+			withCredentials([file(credentialsId: KUBE_CONFIG, variable: 'KUBECONFIG')]) {
+
+				dir('dmaap-vth/helm'){
+			    	//check if charts are valid, and then perform dry run, if successful then upgrade/install charts
+
+  					if (PHASES.contains("UNDEPLOY") ) {
+						stage 'Undeploy'
+
+  						sh """
+  							helm delete --tiller-namespace=$TILLER_NAMESPACE --purge $ARTIFACT_ID
+  						"""
+  					}
+
+			    	//NOTE Double quotes are used below to access groovy variables like artifact_id and tiller_namespace
+    	          	if (PHASES.contains("DEPLOY") ){
+    	          		stage 'Deploy'
+							withCredentials([usernamePassword(credentialsId: MECHID, usernameVariable: 'USERNAME', passwordVariable: 'PASSWORD')]) {
+
+								sh """
+								    helm version
+									echo "Validate Yaml"
+									helm lint $ARTIFACT_ID
+
+									echo "View Helm Templates"
+									helm template $ARTIFACT_ID --set appName=$ARTIFACT_ID \
+                                        --set appName=$ARTIFACT_ID \
+                                        --set version=$VERSION  \
+                                        --set env=$ENV \
+                                        --set image=$IMAGE_NAME \
+                                        --set namespace=$TILLER_NAMESPACE \
+                                        --set credentials.username= $USERNAME \
+                                        --set credentials.password= $PASSWORD
+
+									echo "Perform Dry Run Of Install"
+									helm upgrade --tiller-namespace=$TILLER_NAMESPACE --install --dry-run $ARTIFACT_ID $ARTIFACT_ID \
+                                        --set appName=$ARTIFACT_ID \
+                                        --set version=$VERSION \
+                                        --set env=$ENV \
+                                        --set image=$IMAGE_NAME \
+                                        --set namespace=$TILLER_NAMESPACE \
+                                        --set credentials.username=$USERNAME \
+                                        --set credentials.password=$PASSWORD
+
+
+									echo "Helm Install/Upgrade"
+					    			helm upgrade --tiller-namespace=$TILLER_NAMESPACE --install $ARTIFACT_ID $ARTIFACT_ID \
+                                        --set appName=$ARTIFACT_ID \
+                                        --set version=$VERSION \
+                                        --set env=$ENV \
+                                        --set image=$IMAGE_NAME \
+                                        --set namespace=$TILLER_NAMESPACE \
+                                        --set credentials.username=$USERNAME \
+                                        --set credentials.password=$PASSWORD
+
+								"""
+							}
+    	          	}
+
+				}
+			}
+      	}
+
+	}
+}