From: raviteja.karumuri Date: Wed, 9 Oct 2024 09:44:02 +0000 (+0100) Subject: ONAP FTC job script to run when new patchset created X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=commitdiff_plain;h=b5f7d83505e3dd8808854baf9760045135fde199;p=nonrtric.git ONAP FTC job script to run when new patchset created Issue-ID: NONRTRIC-1032 Signed-off-by: Raviteja Karumuri Change-Id: I85af71febfbcc0d353db6581bf5b8119f2c1111a --- diff --git a/test/auto-test/onap-suite-verify-jobs.sh b/test/auto-test/onap-suite-verify-jobs.sh new file mode 100644 index 00000000..549b3cb8 --- /dev/null +++ b/test/auto-test/onap-suite-verify-jobs.sh @@ -0,0 +1,34 @@ +#!/bin/bash + +# ============LICENSE_START=============================================== +# Copyright (C) 2024 OpenInfra Foundation Europe. All rights reserved. +# ======================================================================== +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END================================================= +# + +TS_ONELINE_DESCR="Test suite - This suite will cover the components(A1PMS) for the verify job" + +. ../common/testsuite_common.sh + +suite_setup + +############# TEST CASES ################# + +./FTC10.sh $@ + +########################################## + +suite_complete + +exit diff --git a/test/auto-test/onap-verify-jobs.sh b/test/auto-test/onap-verify-jobs.sh new file mode 100644 index 00000000..d5d0f9ff --- /dev/null +++ b/test/auto-test/onap-verify-jobs.sh @@ -0,0 +1,74 @@ +#!/bin/bash + +# ============LICENSE_START=============================================== +# Copyright (C) 2024 OpenInfra Foundation Europe. All rights reserved. +# ======================================================================== +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END================================================= +# + +TEST_DIRECTORY="test/auto-test" +TEST_SCRIPT="./onap-suite-verify-jobs.sh" +DOCKER_COMPOSE_VERSION="v2.21.0" +PULL_IMAGE_TYPE="remote-remove" +RUN_MODE="docker" +IMAGE_VERSION="release" +ENV_FLAG="--env-file" +A1PMS_LOCAL_IMAGE_FLAG="--use-local-image" +LOCAL_IMAGE_FLAG="A1PMS" +DELETE_CONTAINERS_FLAG="--delete-containers" +ENV_FILE="../common/onap_ftc_job_env.sh" + +# Check if jq is installed, and install it if not +if ! command -v jq &> /dev/null; then + echo "Installing jq..." + sudo apt-get update + sudo apt-get install -y jq +fi + +# Function to install Docker Compose version 2 +install_docker_compose() { + echo "Installing Docker Compose version 2..." + sudo curl -L "https://github.com/docker/compose/releases/download/"$DOCKER_COMPOSE_VERSION"/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose + sudo chmod +x /usr/local/bin/docker-compose + sudo ln -s /usr/local/bin/docker-compose /usr/libexec/docker/cli-plugins/docker-compose +} + +# Function to remove Docker Compose +remove_docker_compose() { + echo "Removing Docker Compose..." + sudo rm /usr/local/bin/docker-compose +} + +# Check if docker-compose is installed, and install it if not +if ! command -v docker-compose &> /dev/null; then + install_docker_compose +fi + +cd "$TEST_DIRECTORY" +sudo chmod 775 "$TEST_SCRIPT" +"$TEST_SCRIPT" $PULL_IMAGE_TYPE $RUN_MODE $IMAGE_VERSION $ENV_FLAG $ENV_FILE $A1PMS_LOCAL_IMAGE_FLAG $LOCAL_IMAGE_FLAG $DELETE_CONTAINERS_FLAG +exit_val=$? + +# Remove docker-compose after tests are done +if command -v docker-compose &> /dev/null; then + remove_docker_compose +fi + +# Remove jq after tests are done +if command -v jq &> /dev/null; then + echo "Removing jq..." + sudo apt-get remove -y jq +fi + +exit $exit_val diff --git a/test/common/onap_ftc_job_env.sh b/test/common/onap_ftc_job_env.sh new file mode 100644 index 00000000..659f5c1a --- /dev/null +++ b/test/common/onap_ftc_job_env.sh @@ -0,0 +1,405 @@ +#!/bin/bash + +# ============LICENSE_START=============================================== +# Copyright (C) 2024 OpenInfra Foundation Europe. All rights reserved. +# ======================================================================== +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END================================================= +# +#Profile for ONAP honolulu release +TEST_ENV_PROFILE="ONAP-MONTREAL" +FLAVOUR="ONAP" + +######################################## +## Nexus repo settings +######################################## + +# Nexus repos for developed images +NEXUS_PROXY_REPO="nexus3.onap.org:10001/" +NEXUS_RELEASE_REPO="nexus3.onap.org:10002/" +NEXUS_SNAPSHOT_REPO="nexus3.onap.org:10003/" +NEXUS_STAGING_REPO=$NEXUS_SNAPSHOT_REPO #staging repo not used in ONAP, using snapshot + +# Nexus repos for images used by test (not developed by the project) +NEXUS_RELEASE_REPO_ORAN="nexus3.o-ran-sc.org:10002/" # Only for released ORAN images +NEXUS_RELEASE_REPO_ONAP=$NEXUS_RELEASE_REPO + +######################################## +# Set up of image and tags for the test. +######################################## + +# NOTE: One environment variable containing the image name and tag is create by the test script +# for each image from the env variables below. +# The variable is created by removing the suffix "_BASE" from the base image variable name. +# Example: A1PMS_IMAGE_BASE -> A1PMS_IMAGE +# This var will point to the local or remote image depending on cmd line arguments. +# In addition, the repo and the image tag version are selected from the list of image tags based on the cmd line argument. +# For images built by the script, only tag #1 shall be specified +# For project images, only tag #1, #2, #3 and #4 shall be specified +# For ORAN images (non project), only tag #5 shall be specified +# For ONAP images (non project), only tag #6 shall be specified +# For all other images, only tag #7 shall be specified +# 1 XXX_LOCAL: local images: : +# 2 XXX_REMOTE_SNAPSHOT: snapshot images: : +# 3 XXX_REMOTE: staging images: : +# 4 XXX_REMOTE_RELEASE: release images: : +# 5 XXX_REMOTE_RELEASE_ORAN: ORAN release images: : +# 6 XXX_REMOTE_RELEASE_ONAP: ONAP release images: : +# 7 XXX_PROXY: other images, not produced by the project: : + +############################################################################# +# Note: +# The image tags for a1pms and sdnc are updated AFTER the release. +# This means that the latest staging/snapshot images for these two components have +# version one step (0.0.1 - bug-level) higher than the +# latest release image version. + +# This is only applicable for ONAP images +############################################################################# + +# A1PMS image and tags +A1PMS_IMAGE_BASE="onap/ccsdk-oran-a1policymanagementservice" +A1PMS_IMAGE_TAG_LOCAL="1.8.1-SNAPSHOT" +A1PMS_IMAGE_TAG_REMOTE_SNAPSHOT="1.6.1-SNAPSHOT" +A1PMS_IMAGE_TAG_REMOTE="1.6.1-STAGING-latest" #Will use snapshot repo +A1PMS_IMAGE_TAG_REMOTE_RELEASE="1.6.1" + +# SDNC A1 Controller remote image and tag +SDNC_A1_CONTROLLER_IMAGE_BASE="onap/sdnc-image" +SDNC_A1_CONTROLLER_IMAGE_TAG_LOCAL="2.5.1-SNAPSHOT" ###CHECK THIS +SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE_SNAPSHOT="2.5.1-STAGING-latest" +SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE="2.5.1-STAGING-latest" #Will use snapshot repo +SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE_RELEASE="2.5.1" + +#SDNC DB remote image and tag +#The DB is part of SDNC so handled in the same way as SDNC +SDNC_DB_IMAGE_BASE="mariadb" +SDNC_DB_IMAGE_TAG_REMOTE_PROXY="10.5" + +# ICS image and tag - using i release +ICS_IMAGE_BASE="o-ran-sc/nonrtric-plt-informationcoordinatorservice" +ICS_IMAGE_TAG_REMOTE_RELEASE_ORAN="1.6.0" +#Note: Update var ICS_FEATURE_LEVEL if image version is changed + +# Control Panel image and tag - using i release +CONTROL_PANEL_IMAGE_BASE="o-ran-sc/nonrtric-controlpanel" +CONTROL_PANEL_IMAGE_TAG_REMOTE_RELEASE_ORAN="2.5.0" + +# Gateway image and tags - used i release +NRT_GATEWAY_IMAGE_BASE="o-ran-sc/nonrtric-gateway" +NRT_GATEWAY_IMAGE_TAG_REMOTE_RELEASE_ORAN="1.2.0" + +# RAPP Catalogue image and tags - used i release +RAPP_CAT_IMAGE_BASE="o-ran-sc/nonrtric-plt-rappcatalogue" +RAPP_CAT_IMAGE_TAG_REMOTE_RELEASE_ORAN="1.2.0" + + +# Near RT RIC Simulator image and tags - used i release +RIC_SIM_IMAGE_BASE="o-ran-sc/a1-simulator" +RIC_SIM_IMAGE_TAG_REMOTE_RELEASE_ORAN="2.6.1" + +#MR stub image and tag +MRSTUB_IMAGE_BASE="mrstub" +MRSTUB_IMAGE_TAG_LOCAL="latest" +#No remote image for MR stub, local image always used + + +#Callback receiver image and tag +CR_IMAGE_BASE="callback-receiver" +CR_IMAGE_TAG_LOCAL="latest" +#No remote image for CR, local image always used + + +#Producer stub image and tag +PROD_STUB_IMAGE_BASE="producer-stub" +PROD_STUB_IMAGE_TAG_LOCAL="latest" +#No remote image for producer stub, local image always used + + +#Http proxy remote image and tag +HTTP_PROXY_IMAGE_BASE="nodejs-http-proxy" +HTTP_PROXY_IMAGE_TAG_LOCAL="latest" +#No local image for http proxy, remote image always used + +#ONAP Zookeeper remote image and tag +ONAP_ZOOKEEPER_IMAGE_BASE="onap/dmaap/zookeeper" +ONAP_ZOOKEEPER_IMAGE_TAG_REMOTE_RELEASE_ONAP="6.1.0" +#No local image for ONAP Zookeeper, remote image always used + +#ONAP Kafka remote image and tag +ONAP_KAFKA_IMAGE_BASE="onap/dmaap/kafka111" +ONAP_KAFKA_IMAGE_TAG_REMOTE_RELEASE_ONAP="1.1.1" +#No local image for ONAP Kafka, remote image always used + +#ONAP DMAAP-MR remote image and tag +ONAP_DMAAPMR_IMAGE_BASE="onap/dmaap/dmaap-mr" +ONAP_DMAAPMR_IMAGE_TAG_REMOTE_RELEASE_ONAP="1.3.0" +#No local image for ONAP DMAAP-MR, remote image always used + +#Kube proxy remote image and tag +KUBE_PROXY_IMAGE_BASE="nodejs-kube-proxy" +KUBE_PROXY_IMAGE_TAG_LOCAL="latest" +#No remote image for kube proxy, local image always used + +#Kube proxy remote image and tag +PVC_CLEANER_IMAGE_BASE="ubuntu" +PVC_CLEANER_IMAGE_TAG_REMOTE_PROXY="20.10" +#No local image for pvc cleaner, remote image always used + +# List of app short names produced by the project +PROJECT_IMAGES_APP_NAMES="A1PMS SDNC" + +# List of app short names which images pulled from ORAN +ORAN_IMAGES_APP_NAMES="CP ICS RICSIM RC NGW" + +# List of app short names which images pulled from ONAP +ONAP_IMAGES_APP_NAMES="" # Not used + + +######################################## +# Detailed settings per app +######################################## + + +DOCKER_SIM_NWNAME="nonrtric-docker-net" # Name of docker private network + +KUBE_NONRTRIC_NAMESPACE="nonrtric" # Namespace for all nonrtric components +KUBE_SIM_NAMESPACE="nonrtric-ft" # Namespace for simulators (except MR and RICSIM) +KUBE_A1SIM_NAMESPACE="a1-sim" # Namespace for a1-p simulators (RICSIM) +KUBE_ONAP_NAMESPACE="onap" # Namespace for onap (only message router) +KUBE_SDNC_NAMESPACE="onap" # Namespace for sdnc + +A1PMS_EXTERNAL_PORT=8081 # A1PMS container external port (host -> container) +A1PMS_INTERNAL_PORT=8081 # A1PMS container internal port (container -> container) +A1PMS_EXTERNAL_SECURE_PORT=8433 # A1PMS container external secure port (host -> container) +A1PMS_INTERNAL_SECURE_PORT=8433 # A1PMS container internal secure port (container -> container) +A1PMS_APIS="V1 V2" # Supported northbound api versions +A1PMS_VERSION="V2" # Tested version of northbound API +# A1PMS_V3="V3" # To be used this property in further env releases +A1PMS_API_PREFIX="/a1-policy" # api url prefix, only for V2. Shall contain leading "/" +# A1PMS_API_PREFIX_V3="/a1policymanagement" # To be used this property in further env releases +# A1PMS_V3_FLAG="true" # To be used this property in further env releases + +A1PMS_APP_NAME="policymanagementservice" # Name for A1PMS container +A1PMS_DISPLAY_NAME="Policy Management Service" +A1PMS_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host +A1PMS_LOGPATH="/var/log/policy-agent/application.log" # Path the application log in the A1PMS container +A1PMS_APP_NAME_ALIAS="policy-agent-container" # Alias name, name used by the control panel +A1PMS_CONFIG_KEY="policy-agent" # Key for consul config +A1PMS_PKG_NAME="org.onap.ccsdk.oran.a1policymanagementservice" # Java base package name +A1PMS_ACTUATOR="/actuator/loggers/$A1PMS_PKG_NAME" # Url for trace/debug +A1PMS_ALIVE_URL="$A1PMS_API_PREFIX/v2/status" # Base path for alive check +# A1PMS_ALIVE_URL_V3=/v1/status # To be used this property in further env releases +A1PMS_COMPOSE_DIR="a1pms" # Dir in simulator_group for docker-compose +A1PMS_CONFIG_MOUNT_PATH="/opt/app/policy-agent/config" # Path in container for config file +A1PMS_DATA_MOUNT_PATH="/opt/app/policy-agent/data" # Path in container for data file +A1PMS_CONFIG_FILE="application.yaml" # Container config file name +A1PMS_DATA_FILE="application_configuration.json" # Container data file name +A1PMS_CONTAINER_MNT_DIR="/var/policy-management-service" # Mounted dir in the container +A1PMS_FEATURE_LEVEL="NO-DMAAP ADAPTER-CLASS" # Space separated list of features +A1PMS_ADAPTER_CLASS="" # Class name set by override file +A1PMS_ADAPTER_POLICY_NAME="" # Policy name set by override file + +ICS_APP_NAME="informationservice" # Name for ICS container +ICS_DISPLAY_NAME="Enrichment Coordinator Service" # Display name for ICS container +ICS_EXTERNAL_PORT=8083 # ICS container external port (host -> container) +ICS_INTERNAL_PORT=8083 # ICS container internal port (container -> container) +ICS_EXTERNAL_SECURE_PORT=8434 # ICS container external secure port (host -> container) +ICS_INTERNAL_SECURE_PORT=8434 # ICS container internal secure port (container -> container) + +ICS_LOGPATH="/var/log/information-coordinator-service/application.log" # Path the application log in the ICS container +ICS_APP_NAME_ALIAS="information-service-container" # Alias name, name used by the control panel +ICS_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host +ICS_CONTAINER_MNT_DIR="/var/information-coordinator-service" # Mounted dir in the container +ICS_ACTUATOR="/actuator/loggers/org.oransc.ics" # Url for trace/debug +ICS_CERT_MOUNT_DIR="./cert" +ICS_ALIVE_URL="/status" # Base path for alive check +ICS_COMPOSE_DIR="ics" # Dir in simulator_group for docker-compose +ICS_CONFIG_MOUNT_PATH=/opt/app/information-coordinator-service/config # Internal container path for configuration +ICS_CONFIG_FILE=application.yaml # Config file name +ICS_FEATURE_LEVEL="" # Space separated list of features + +MR_DMAAP_APP_NAME="message-router" # Name for the Dmaap MR +MR_STUB_APP_NAME="mr-stub" # Name of the MR stub +MR_DMAAP_DISPLAY_NAME="DMAAP Message Router" +MR_STUB_DISPLAY_NAME="Message Router stub" +MR_STUB_CERT_MOUNT_DIR="./cert" +MR_EXTERNAL_PORT=3904 # MR dmaap/stub container external port +MR_INTERNAL_PORT=3904 # MR dmaap/stub container internal port +MR_EXTERNAL_SECURE_PORT=3905 # MR dmaap/stub container external secure port +MR_INTERNAL_SECURE_PORT=3905 # MR dmaap/stub container internal secure port +MR_DMAAP_LOCALHOST_PORT=3904 # MR stub container external port (host -> container) +MR_STUB_LOCALHOST_PORT=3908 # MR stub container external port (host -> container) +MR_DMAAP_LOCALHOST_SECURE_PORT=3905 # MR stub container internal port (container -> container) +MR_STUB_LOCALHOST_SECURE_PORT=3909 # MR stub container external secure port (host -> container) +MR_READ_TOPIC="A1-POLICY-AGENT-READ" # Read topic +MR_WRITE_TOPIC="A1-POLICY-AGENT-WRITE" # Write topic +MR_READ_URL="/events/$MR_READ_TOPIC/users/policy-agent?timeout=15000&limit=100" # Path to read messages from MR +MR_WRITE_URL="/events/$MR_WRITE_TOPIC" # Path to write messages to MR +MR_STUB_ALIVE_URL="/" # Base path for mr stub alive check +MR_DMAAP_ALIVE_URL="/topics" # Base path for dmaap-mr alive check +MR_DMAAP_COMPOSE_DIR="dmaapmr" # Dir in simulator_group for dmaap mr for - docker-compose +MR_STUB_COMPOSE_DIR="mrstub" # Dir in simulator_group for mr stub for - docker-compose +MR_KAFKA_APP_NAME="message-router-kafka" # Kafka app name, if just named "kafka" the image will not start... +MR_KAFKA_PORT=9092 # Kafka port number +MR_KAFKA_DOCKER_LOCALHOST_PORT=30098 # Kafka port number for docker localhost +MR_KAFKA_KUBE_NODE_PORT=30099 # Kafka node port number for kube +MR_ZOOKEEPER_APP_NAME="zookeeper" # Zookeeper app name +MR_ZOOKEEPER_PORT="2181" # Zookeeper port number +MR_DMAAP_HOST_MNT_DIR="/mnt" # Basedir localhost for mounted files +MR_DMAAP_HOST_CONFIG_DIR="/configs1" # Config files dir on localhost + +CR_APP_NAME="callback-receiver" # Name for the Callback receiver +CR_DISPLAY_NAME="Callback Reciever" +CR_EXTERNAL_PORT=8090 # Callback receiver container external port (host -> container) +CR_INTERNAL_PORT=8090 # Callback receiver container internal port (container -> container) +CR_EXTERNAL_SECURE_PORT=8091 # Callback receiver container external secure port (host -> container) +CR_INTERNAL_SECURE_PORT=8091 # Callback receiver container internal secure port (container -> container) +CR_APP_NAME="callback-receiver" # Name for the Callback receiver +CR_APP_CALLBACK="/callbacks" # Url for callbacks +CR_APP_CALLBACK_MR="/callbacks-mr" # Url for callbacks (data from mr which contains string encoded jsons in a json arr) +CR_APP_CALLBACK_TEXT="/callbacks-text" # Url for callbacks (data containing text data) +CR_ALIVE_URL="/reset" # Base path for alive check +CR_COMPOSE_DIR="cr" # Dir in simulator_group for docker-compose + +PROD_STUB_APP_NAME="producer-stub" # Name for the Producer stub +PROD_STUB_DISPLAY_NAME="Producer Stub" +PROD_STUB_EXTERNAL_PORT=8092 # Producer stub container external port (host -> container) +PROD_STUB_INTERNAL_PORT=8092 # Producer stub container internal port (container -> container) +PROD_STUB_EXTERNAL_SECURE_PORT=8093 # Producer stub container external secure port (host -> container) +PROD_STUB_INTERNAL_SECURE_PORT=8093 # Producer stub container internal secure port (container -> container) +PROD_STUB_JOB_CALLBACK="/callbacks/job" # Callback path for job create/update/delete +PROD_STUB_SUPERVISION_CALLBACK="/callbacks/supervision" # Callback path for producer supervision +PROD_STUB_ALIVE_URL="/" # Base path for alive check +PROD_STUB_COMPOSE_DIR="prodstub" # Dir in simulator_group for docker-compose + +RIC_SIM_DISPLAY_NAME="Near-RT RIC A1 Simulator" +RIC_SIM_BASE="g" # Base name of the RIC Simulator container, shall be the group code + # Note, a prefix is added to each container name by the .env file in the 'ric' dir +RIC_SIM_PREFIX="ricsim" # Prefix added to ric container name, added in the .env file in the 'ric' dir + # This prefix can be changed from the command line +RIC_SIM_INTERNAL_PORT=8085 # RIC Simulator container internal port (container -> container). + # (external ports allocated by docker) +RIC_SIM_INTERNAL_SECURE_PORT=8185 # RIC Simulator container internal secure port (container -> container). + # (external ports allocated by docker) +RIC_SIM_CERT_MOUNT_DIR="./cert" +RIC_SIM_COMPOSE_DIR="ric" # Dir in simulator group for docker compose +RIC_SIM_ALIVE_URL="/" +RIC_SIM_COMMON_SVC_NAME="" # Name of svc if one common svc is used for all ric sim groups (stateful sets) + +SDNC_APP_NAME="a1controller" # Name of the SNDC A1 Controller container +SDNC_DISPLAY_NAME="SDNC A1 Controller" +SDNC_EXTERNAL_PORT=8282 # SNDC A1 Controller container external port (host -> container) +SDNC_INTERNAL_PORT=8181 # SNDC A1 Controller container internal port (container -> container) +SDNC_EXTERNAL_SECURE_PORT=8443 # SNDC A1 Controller container external secure port (host -> container) +SDNC_INTERNAL_SECURE_PORT=8443 # SNDC A1 Controller container internal secure port (container -> container) +SDNC_DB_APP_NAME="sdncdb" # Name of the SDNC DB container +SDNC_A1_TRUSTSTORE_PASSWORD="a1adapter" # SDNC truststore password +SDNC_USER="admin" # SDNC username +SDNC_PWD="admin" # SNDC PWD +SDNC_PWD="Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U" # SNDC PWD +SDNC_API_URL="/rests/operations/A1-ADAPTER-API:" # Base url path for SNDC API (for upgraded sdnc) +#SDNC_API_URL="/restconf/operations/A1-ADAPTER-API:" # Base url path for SNDC API +SDNC_ALIVE_URL="/apidoc/explorer/index.html" # Base url path for SNDC API docs (for alive check) +SDNC_COMPOSE_DIR="sdnc" +SDNC_COMPOSE_FILE="docker-compose-2.yml" +SDNC_KUBE_APP_FILE="app2.yaml" +SDNC_KARAF_LOG="/opt/opendaylight/data/log/karaf.log" # Path to karaf log +SDNC_RESPONSE_JSON_KEY="A1-ADAPTER-API:output" # Key name for output json in replies from sdnc (for upgraded sdnc) +#SDNC_RESPONSE_JSON_KEY="output" # Key name for output json in replies from sdnc +SDNC_FEATURE_LEVEL="TRANS_RESP_CODE NO_NB_HTTPS" # Space separated list of features + # TRANS_RESP_CODE: SDNC return southbound response code + +RAPP_CAT_APP_NAME="rappcatalogueservice" # Name for the RAPP Catalogue +RAPP_CAT_DISPLAY_NAME="RAPP Catalogue Service" +RAPP_CAT_EXTERNAL_PORT=8680 # RAPP Catalogue container external port (host -> container) +RAPP_CAT_INTERNAL_PORT=8680 # RAPP Catalogue container internal port (container -> container) +RAPP_CAT_EXTERNAL_SECURE_PORT=8633 # RAPP Catalogue container external secure port (host -> container) +RAPP_CAT_INTERNAL_SECURE_PORT=8633 # RAPP Catalogue container internal secure port (container -> container) +RAPP_CAT_ALIVE_URL="/services" # Base path for alive check +RAPP_CAT_COMPOSE_DIR="rapp_catalogue" # Dir in simulator_group for docker-compose + +CONTROL_PANEL_APP_NAME="controlpanel" # Name of the Control Panel container +CONTROL_PANEL_DISPLAY_NAME="Non-RT RIC Control Panel" +CONTROL_PANEL_EXTERNAL_PORT=8080 # Control Panel container external port (host -> container) +CONTROL_PANEL_INTERNAL_PORT=8080 # Control Panel container internal port (container -> container) +CONTROL_PANEL_EXTERNAL_SECURE_PORT=8880 # Control Panel container external port (host -> container) +CONTROL_PANEL_INTERNAL_SECURE_PORT=8082 # Control Panel container internal port (container -> container) +CONTROL_PANEL_LOGPATH="/logs/nonrtric-controlpanel.log" # Path the application log in the Control Panel container +CONTROL_PANEL_ALIVE_URL="/" # Base path for alive check +CONTROL_PANEL_COMPOSE_DIR="control_panel" # Dir in simulator_group for docker-compose +CONTROL_PANEL_CONFIG_MOUNT_PATH=/maven # Container internal path for config +CONTROL_PANEL_CONFIG_FILE=application.properties # Config file name +CONTROL_PANEL_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host + +NRT_GATEWAY_APP_NAME="nonrtricgateway" # Name of the Gateway container +NRT_GATEWAY_DISPLAY_NAME="NonRT-RIC Gateway" +NRT_GATEWAY_EXTERNAL_PORT=9090 # Gateway container external port (host -> container) +NRT_GATEWAY_INTERNAL_PORT=9090 # Gateway container internal port (container -> container) +NRT_GATEWAY_EXTERNAL_SECURE_PORT=9091 # Gateway container external port (host -> container) +NRT_GATEWAY_INTERNAL_SECURE_PORT=9091 # Gateway container internal port (container -> container) +NRT_GATEWAY_LOGPATH="/var/log/nonrtric-gateway/application.log" # Path the application log in the Gateway container +NRT_GATEWAY_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host +NRT_GATEWAY_ALIVE_URL="/actuator/metrics" # Base path for alive check +NRT_GATEWAY_COMPOSE_DIR="ngw" # Dir in simulator_group for docker-compose +NRT_GATEWAY_CONFIG_MOUNT_PATH=/opt/app/nonrtric-gateway/config # Container internal path for config +NRT_GATEWAY_CONFIG_FILE=application.yaml # Config file name +NRT_GATEWAY_PKG_NAME="org.springframework.cloud.gateway" # Java base package name +NRT_GATEWAY_ACTUATOR="/actuator/loggers/$NRT_GATEWAY_PKG_NAME" # Url for trace/debug + +HTTP_PROXY_APP_NAME="httpproxy" # Name of the Http Proxy container +HTTP_PROXY_DISPLAY_NAME="Http Proxy" +HTTP_PROXY_EXTERNAL_PORT=8740 # Http Proxy container external port (host -> container) +HTTP_PROXY_INTERNAL_PORT=8080 # Http Proxy container internal port (container -> container) +HTTP_PROXY_EXTERNAL_SECURE_PORT=8742 # Http Proxy container external secure port (host -> container) +HTTP_PROXY_INTERNAL_SECURE_PORT=8433 # Http Proxy container internal secure port (container -> container) +HTTP_PROXY_WEB_EXTERNAL_PORT=8741 # Http Proxy container external port (host -> container) +HTTP_PROXY_WEB_INTERNAL_PORT=8081 # Http Proxy container internal port (container -> container) +HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT=8743 # Http Proxy container external secure port (host -> container) +HTTP_PROXY_WEB_INTERNAL_SECURE_PORT=8434 # Http Proxy container internal secure port (container -> container +HTTP_PROXY_CONFIG_PORT=0 # Port number for proxy config, will be set if proxy is started +HTTP_PROXY_CONFIG_HOST_NAME="" # Proxy host, will be set if proxy is started +HTTP_PROXY_ALIVE_URL="/" # Base path for alive check +HTTP_PROXY_COMPOSE_DIR="httpproxy" # Dir in simulator_group for docker-compose +HTTP_PROXY_BUILD_DIR="http-https-proxy" # Dir in simulator_group for image build - note, reuses source from kubeproxy + +KUBE_PROXY_APP_NAME="kubeproxy" # Name of the Kube Http Proxy container +KUBE_PROXY_DISPLAY_NAME="Kube Http Proxy" +KUBE_PROXY_EXTERNAL_PORT=8730 # Kube Http Proxy container external port (host -> container) +KUBE_PROXY_INTERNAL_PORT=8080 # Kube Http Proxy container internal port (container -> container) +KUBE_PROXY_EXTERNAL_SECURE_PORT=8782 # Kube Proxy container external secure port (host -> container) +KUBE_PROXY_INTERNAL_SECURE_PORT=8433 # Kube Proxy container internal secure port (container -> container) +KUBE_PROXY_WEB_EXTERNAL_PORT=8731 # Kube Http Proxy container external port (host -> container) +KUBE_PROXY_WEB_INTERNAL_PORT=8081 # Kube Http Proxy container internal port (container -> container) +KUBE_PROXY_WEB_EXTERNAL_SECURE_PORT=8783 # Kube Proxy container external secure port (host -> container) +KUBE_PROXY_WEB_INTERNAL_SECURE_PORT=8434 # Kube Proxy container internal secure port (container -> container + +KUBE_PROXY_DOCKER_EXTERNAL_PORT=8732 # Kube Http Proxy container external port, docker (host -> container) +KUBE_PROXY_DOCKER_EXTERNAL_SECURE_PORT=8784 # Kube Proxy container external secure port, docker (host -> container) +KUBE_PROXY_WEB_DOCKER_EXTERNAL_PORT=8733 # Kube Http Proxy container external port, docker (host -> container) +KUBE_PROXY_WEB_DOCKER_EXTERNAL_SECURE_PORT=8785 # Kube Proxy container external secure port, docker (host -> container) + +KUBE_PROXY_PATH="" # Proxy url path, will be set if proxy is started +KUBE_PROXY_ALIVE_URL="/" # Base path for alive check +KUBE_PROXY_COMPOSE_DIR="kubeproxy" # Dir in simulator_group for docker-compose + +PVC_CLEANER_APP_NAME="pvc-cleaner" # Name for Persistent Volume Cleaner container +PVC_CLEANER_DISPLAY_NAME="Persistent Volume Cleaner" # Display name for Persistent Volume Cleaner +PVC_CLEANER_COMPOSE_DIR="pvc-cleaner" # Dir in simulator_group for yamls + +######################################## +# Setting for common curl-base function +######################################## + +UUID="" # UUID used as prefix to the policy id to simulate a real UUID + # Testscript need to set the UUID to use other this empty prefix is used diff --git a/test/simulator-group/a1pms/application.yaml b/test/simulator-group/a1pms/application.yaml index a3530b79..4667a4e0 100644 --- a/test/simulator-group/a1pms/application.yaml +++ b/test/simulator-group/a1pms/application.yaml @@ -21,6 +21,24 @@ spring: allow-bean-definition-overriding: true aop: auto: false + application: + name: a1-pms + flyway: + # Configuration of the postgres database to be used for database migration. + # This is where the flyway maintains the information about the sql files loaded. + # These values can be passed via configmap/secret/env variable based on the installation. + # By default, Flyway uses location classpath:db/migration to load the sql files. + # This can be overridden using "flyway.locations" to have a different location. + baseline-on-migrate: true + url: "jdbc:postgresql://127.0.0.1:5432/a1pms" + user: a1pms + password: mypwd + r2dbc: + # Configuration of the postgres database to be used by the application. + # These values can be passed via configmap/secret/env variable based on the installation. + url: "r2dbc:postgresql://127.0.0.1:5432/a1pms" + username: a1pms + password: mypwd management: endpoints: web: @@ -28,6 +46,24 @@ management: # Enabling of springboot actuator features. See springboot documentation. include: "loggers,logfile,health,info,metrics,threaddump,heapdump" +otel: + exporter: + otlp: + traces: + endpoint: ${ONAP_OTEL_EXPORTER_ENDPOINT:http://jaeger:4317} + protocol: ${ONAP_OTEL_EXPORTER_PROTOCOL:grpc} + logs: + exporter: none + metrics: + exporter: none + sdk: + disabled: ${ONAP_SDK_DISABLED:true} + south: ${ONAP_TRACING_SOUTHBOUND:true} + tracing: + sampler: + jaeger_remote: + endpoint: ${ONAP_OTEL_SAMPLER_JAEGER_REMOTE_ENDPOINT:http://jaeger:14250} + logging: # Configuration of logging level: @@ -57,6 +93,10 @@ app: vardata-directory: /var/policy-management-service # path to json schema for config validation config-file-schema-path: /application_configuration_schema.json + # Postgres database usage is enabled using the below parameter. + # If this is enabled, the application will use postgres database for storage. + # This overrides the s3(s3.bucket) or file store(vardata-directory) configuration if enabled. + database-enabled: false webclient: # Configuration of the trust store used for the HTTP client (outgoing requests) # The file location and the password for the truststore is only relevant if trust-store-used == true