Desc: C source code SSI Interface Implementation
- File: rg_ex_ms.c
+ File: mac_msg_router.c
**********************************************************************/
-/** @file rg_ex_ms.c
+/** @file mac_msg_router.c
@brief This file contains the implementation of callback functions
registered with SSI during the LTE MAC Task initialization.
*/
+++ /dev/null
-/*******************************************************************************
-################################################################################
-# Copyright (c) [2017-2019] [Radisys] #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-*******************************************************************************/
-
-/********************************************************************20**
-
- Name: NR RLC file
-
- Type: C include file
-
- Desc: This file contain the hash definations for RLC
-
- File: kw.h
-
-*********************************************************************21*/
-/** @file kw.h
-@brief RLC Hash definitions
-*/
-
-#ifndef __KWH__
-#define __KWH__
-#include "du_log.h"
-\f
-
-#define EKWxxx 1
-#define EMG099 1
-#define EMG102 2
-#define EMG103 3
-#define EMG104 4
-
-/* RLC-SPLIT Activity */
-#define RLC_ONE 1
-#define RLC_BIT0 0x01
-#define RLC_BIT1 0x02
-#define RLC_BIT2 0x04
-#define RLC_BIT3 0x08
-
-#define RLC_2K_BYTE 2048
-
-/* RLC RB flag bits */
-#define RLC_RB_REESTABLISH_DL RLC_BIT0
-#define RLC_RB_REESTABLISH_UL RLC_BIT1
-#define RLC_RB_DELETE_DL RLC_BIT2
-#define RLC_RB_DELETE_UL RLC_BIT3
-
-
-#define RLC_MOD_1024 0x3FF /* used for MOD 1024 */
-
-
-\f
-/************************************************************************
- * SAP States
- ************************************************************************/
-
-#define RLC_SAP_NOT_CFG 0 /*!< SAP Not Configured */
-#define RLC_SAP_CFG 1 /*!< SAP Configured but not not bound */
-#define RLC_SAP_BND 2 /*!< SAP Bound */
-#define RLC_SAP_BINDING 3 /*!< SAP Bind initiated */
-#define RLC_SAP_UBND 4 /*!< SAP Unbind */
-
-#define RLC_MAX_SAP_BND_RETRY 3 /*!< Maximum SAP Bin Retries */
-
-#define RLC_MAX_UE 0xffffffff /*!< Maximum number of UEs. */
-
-/* Maximum number of Saps */
-#define RLC_MAX_UDXSAPS 1 /*!< Maximum number of UDX Saps */
-#define RLC_MAX_KWUSAPS 2 /*!< Maximum number of KWU Saps. */
-#define RLC_MAX_CKWSAPS 1 /*!< Maximum number of CKW Saps. */
-/*MCELL changes*/
-#define RLC_MAX_RGUSAPS 4//5 /*!< Maximum number of RGU Saps. */
-
-#define RLC_MAX_RGUSAP_TMR 1 /*!< Maximum number of RGU SAP Timers. */
-
-#define RLC_UI_RRC 0 /*!< Upper interface RRC sap Id. */
-#define RLC_UI_PDCP 1 /*!< Upper interface PDCP sap Id. */
-
-#ifdef LTE_L2_MEAS
-/* TODO. This works for FDD only. For TDD the array dimension
- * should be changed according to the number of Harq Procs */
-#define RLC_MAX_TB_PER_UE 64 /*!< Maximum number of tbCb for UE */
-#define RLC_INVALID_TBID RLC_MAX_TB_PER_UE
-#endif
-/*******************************************************************************
- * Memory related Defines
- ******************************************************************************/
-#ifdef MCCABE_COV
-/* Allocate function */
-#define RLC_ALLOC(_cb,_buf, _size) \
-{ \
- SGetSBuf(_cb->init.region, _cb->init.pool, (Data **)&_buf, \
- (Size) _size); \
- memset((_buf), 0, _size); \
-}
-
-#define RLC_RMV_SDU(_cb,_sduQ,_sdu) \
-{ \
- SPutMsg(_sdu->mBuf); \
- cmLListDelFrm(_sduQ,&_sdu->lstEnt); \
- RLC_FREE(_cb,_sdu, sizeof(RlcSdu)); \
-}
-
-#define RLC_FREE(_cb,_buf, _size) \
-{ \
- (Void) SPutSBuf(_cb->init.region, _cb->init.pool, \
- (Data *) _buf, (Size) _size); \
- _buf = NULLP; \
-}
-
-#else
-
-#define RLC_FREE_SHRABL_BUF(_region, _pool,_buf, _size) \
-{ \
- if (_buf != NULLP) \
- { \
- (Void) SPutStaticBuffer(_region, _pool, \
- (Data *) _buf, (Size) _size, 0); \
- _buf = NULLP; \
- } \
-}
-
-#define RLC_FREE_SHRABL_BUF_WC(_region, _pool,_buf, _size) \
-{ \
- (Void) SPutStaticBuffer(_region, _pool, \
- (Data *) _buf, (Size) _size, 0); \
- _buf = NULLP; \
-}
-
-#define RLC_ALLOC_SHRABL_BUF_WC(_region, _pool,_buf, _size) \
-{ \
- SGetStaticBuffer(_region, _pool, (Data **)&_buf, \
- (Size) _size, 0); \
-}
-
-#define RLC_ALLOC_SHRABL_BUF(_region, _pool,_buf, _size) \
-{ \
- if (SGetStaticBuffer(_region, _pool, (Data **)&_buf, \
- (Size) _size, 0) == ROK) \
- { \
- memset((_buf), 0, _size); \
- } \
- else \
- { \
- (_buf) = NULLP; \
- } \
-}
-/* Allocate function */
-#define RLC_ALLOC(_cb,_buf, _size) \
-{ \
- if (SGetSBuf(_cb->init.region, _cb->init.pool, (Data **)&_buf, \
- (Size) _size) == ROK) \
- { \
- memset((_buf), 0, _size); \
- } \
- else \
- { \
- (_buf) = NULLP; \
- } \
-}
-
-#define RLC_ALLOC_WC(_cb,_buf, _size) \
- SGetSBuf(_cb->init.region, _cb->init.pool, (Data **)&_buf, (Size) _size)
-
-#define RLC_RMV_SDU(_cb,_sduQ,_sdu) \
-{ \
- if(_sdu->mBuf) \
- { \
- SPutMsg(_sdu->mBuf); \
- } \
- cmLListDelFrm(_sduQ,&_sdu->lstEnt); \
- RLC_FREE(_cb,_sdu, sizeof(RlcSdu)); \
-}
-
-#define RLC_FREE(_cb,_buf, _size) \
-{ \
- if (_buf != NULLP) \
- { \
- (Void) SPutSBuf(_cb->init.region, _cb->init.pool, \
- (Data *) _buf, (Size) _size); \
- _buf = NULLP; \
- } \
-}
-
-#endif
-
-/* kw002.201 Freeing from region of pst */
-#define RLC_PST_FREE(_region, _pool, _buf, _size) \
-{ \
- if (_buf != NULLP) \
- { \
- (Void) SPutSBuf(_region, _pool, \
- (Data *) _buf, (Size) _size); \
- _buf = NULLP; \
- } \
-}
-
-#ifdef XEON_SPECIFIC_CHANGES
-#ifdef SS_LOCKLESS_MEMORY
-#define RLC_SHRABL_STATIC_BUF_FREE(_region, _pool, _buf, _size) \
-{ \
- if (_buf != NULLP) \
- { \
- (Void) SPutStaticBuffer(_region, _pool, \
- (Data *) _buf, (Size) _size, 0); \
- _buf = NULLP; \
- } \
-}
-
-#define RLC_SHRABL_STATIC_BUF_ALLOC(_region, _pool, _buf, _size) \
-{ \
- SGetStaticBuffer(_region, _pool, (Data **)&_buf, \
- (Size) _size, 0); \
-}
-
-#else
-
-#define RLC_SHRABL_STATIC_BUF_FREE(_region, _pool, _buf, _size) \
-{ \
- if (_buf != NULLP) \
- { \
- (Void) SPutSBuf(_region, _pool, \
- (Data *) _buf, (Size) _size); \
- _buf = NULLP; \
- } \
-}
-
-#define RLC_SHRABL_STATIC_BUF_ALLOC(_region, _pool, _buf, _size) \
-{ \
- SGetSBuf(_region, _pool, (Data **)&_buf, \
- (Size) _size); \
-}
-#endif /* SS_LOCKLESS_MEMORY */
-
-#else
-
-#define RLC_SHRABL_STATIC_BUF_FREE(_region, _pool, _buf, _size) \
-{ \
- if (_buf != NULLP) \
- { \
- (Void) SPutStaticBuffer(_region, _pool, \
- (Data *) _buf, (Size) _size, 0); \
- _buf = NULLP; \
- } \
-}
-
-#define RLC_SHRABL_STATIC_BUF_ALLOC(_region, _pool, _buf, _size) \
-{ \
- SGetStaticBuffer(_region, _pool, (Data **)&_buf, \
- (Size) _size, 0); \
-}
-#endif
-
-#define RLC_MEM_CPY(_dst, _src, _size) memcpy(_dst, _src, _size);
-
-#define RLC_MEM_ZERO(_buf, _size) memset((_buf), 0, _size);
-
-#define RLC_GET_MEM_REGION(_cb) (_cb->init.region)
-
-#define RLC_GET_MEM_POOL(_cb) (_cb->init.pool)
-
-#define RLC_GET_MEM_POOL_ADDRESS(_cb) (&_cb->init.pool)
-
-/* Memset to value */
-#define RLC_MEM_SET(_arg, _val, _size) memset(_arg, _val, _size);
-
-/* Alarms */
-/* Send an alarm for sapId events */
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-#define RLC_GETSDUIDX(_sduIdx) \
-{\
- _sduIdx = (((_sduIdx)+1) % RLC_L2MEAS_MAX_OUTSTNGSDU);\
-}
-#define RLC_SEND_SAPID_ALARM(_cb,_sapId, _evnt, _cause) \
-{ \
- rlcLmmSendAlarm(_cb,LCM_CATEGORY_INTERFACE, _evnt, _cause, _sapId, 0, 0); \
-}
-#define RLC_SEND_UEID_ALARM(_cb,_ueId, _qci, _evnt, _cause) \
-{ \
- rlcLmmSendAlarm(_cb,LCM_CATEGORY_INTERFACE, _evnt, _cause, 0, _ueId, _qci); \
-}
-#else /* LTE_L2_MEAS */
-#define RLC_SEND_SAPID_ALARM(_cb,_sapId, _evnt, _cause) \
-{ \
- rlcLmmSendAlarm(_cb,LCM_CATEGORY_INTERFACE, _evnt, _cause, _sapId, 0); \
-}
-#define RLC_SEND_UEID_ALARM(_cb,_ueId, _evnt, _cause) \
-{ \
- rlcLmmSendAlarm(_cb,LCM_CATEGORY_INTERFACE, _evnt, _cause, 0, _ueId); \
-}
-#endif /* LTE_L2_MEAS */
-
-/*******************************************************************************
- * Common Defines
- ******************************************************************************/
-
-/* RLC Configuration parameters */
-#define RLC_MAX_UL_LI (2 * RLC_MAX_LI)
-/*macro RLC_MAX_DL_LI is moved to kw_env.h file */
-#define RLC_MAX_DAT RLC_MAXIMUM_DAT
-/*macro RLC_MAX_PDU is moved to kw_env.h file */
-#define RLC_MAX_RB_PER_CELL 10
-#define RLC_MAX_SRB_PER_UE 3
-#define RLC_MAX_DRB_PER_UE 32
-#define RLC_MAX_LCH_PER_UE 12
-#define RLC_MAX_LCH_PER_CELL 6
-#define RLC_MAX_NUM_RB 24
-#define RLC_MAX_UE 0xffffffff
-#define RLC_UE_LIST_BUCKET_SIZE 128
-#define RLC_CELL_LIST_BUCKET_SIZE 10
-#define RLC_TRANS_ID_LST_BKT_SIZE 10
-#define RLC_MAX_RB 32
-
-/* RLC Mode defines */
-#define RLC_MODE_TM 1
-#define RLC_MODE_UM 2
-#define RLC_MODE_AM 3
-
-/* Direction defines */
-#define RLC_DIR_UL 1 /*!< Unlink direction */
-#define RLC_DIR_DL 2 /*!< Downlink direction */
-#define RLC_DIR_BOTH 3 /*!< Both Downlink and Unlink */
-
-#define RLC_DEF_SEQ_NUM 0 /**< Sequence number to pick in case of duplicate
- entries in hash list searches*/
-
-/**
- * @def RLC_MIN
- *
- * Macro to find the miniumum of two numbers
- *
- * @param[in] x First number
- * @param[in] y Second number
- *
-*/
-#define RLC_MIN(x,y) (x) < (y) ? (x) : (y)
-
-/**
- * @def RLC_GET_RLCCB
- *
- * Macro to the RLC instance
- *
- * @param[in] _inst Instance Id
- *
-*/
-#define RLC_GET_RLCCB(_inst) rlcCb[_inst]
-
-#define RLC_ADD_SDU 1 /*!< Add SDU. */
-#define RLC_DEL_SDU 2 /*!< Delete SDU. */
-
-#define RLC_CFM_NOK 0 /*!< Do not send DatCfm */
-#define RLC_CFM_OK 1 /*!< Send DatCfm */
-
-/* Set the unsolictated Status flag */
-#define RLC_SET_USTA_FLAG(_rlcCb, _value) \
-{ \
- _rlcCb->init.usta = _value; \
-}
-
-/* Macros to get the init parameters */
-#define RLC_GET_DBG_MASK(_rlcCb) (_rlcCb->init.dbgMask)
-#define RLC_GET_LMPST_MEM_POOL(_rlcCb) (_rlcCb->init.lmPst.pool)
-#define RLC_GET_LMPST_MEM_REGION(_rlcCb) (_rlcCb->init.lmPst.region)
-
-/* Macros for configuration module */
-#define RLC_CFG_FILL_CFG_CFM(_entCfm, _rbId, _rbType, _status, _reason) \
-{ \
- _entCfm->rbId = _rbId; \
- _entCfm->rbType = _rbType; \
- _entCfm->status.status = _status; \
- _entCfm->status.reason = _reason; \
-}
-
-/**
- * @def RLC_VALIDATE_UE_RBID
- *
- * This macro validates whether the _rbId passed is valid or not. It checks
- * if the _rbId is within the maximum value depending on the _rbType.
- * Returns TRUE if valid else FALSE
- *
- * @param[in] _rbType Type of the Radio Bearer; SRB or DRB
- * @param[in] _rbId RB Id of the RB to be validated
- *
-*/
-#define RLC_VALIDATE_UE_RBID(_rbType, _rbId) \
- ((_rbType == CM_LTE_SRB && _rbId < RLC_MAX_SRB_PER_UE) || \
- (_rbType == CM_LTE_DRB && _rbId < RLC_MAX_DRB_PER_UE))
-
-/*******************************************************************************
- * UIM Defines
- ******************************************************************************/
-#if (ERRCLASS & ERRCLS_INT_PAR)
-#define RLC_VALDATE_SAP(_cb,_chkSpId, _sap, _ret) \
-{ \
- if (_chkSpId != _sap->spId) \
- { \
- RLCLOGERROR(_cb,ERRCLS_DEBUG, EKWxxx, (ErrVal) RFAILED, \
- "Sap Id Validation Failed."); \
- _ret = RFAILED; \
- } \
- /* SAP state validation */ \
- if(_sap->state != RLC_SAP_BND) \
- { \
- RLCLOGERROR(_cb,ERRCLS_INT_PAR, EKWXXX, (ErrVal) RFAILED, \
- "Sap State Invalid."); \
- RLC_SEND_SAPID_ALARM(_cb,0, LCM_EVENT_UI_INV_EVT, LCM_CAUSE_INV_STATE); \
- _ret = RFAILED; \
- } \
-}
-#else /* ERRCLASS & ERRCLS_INT_PAR */
-#define RLC_VALDATE_SAP(_cb,_chkSpId, _sap, _ret) \
-{ \
- /* SAP state validation */ \
- if(_sap->state != RLC_SAP_BND) \
- { \
- RLCLOGERROR(_cb,ERRCLS_INT_PAR, EKWXXX, (ErrVal) RFAILED, \
- "Sap State Invalid."); \
- RLC_SEND_SAPID_ALARM(_cb,0, LCM_EVENT_UI_INV_EVT, LCM_CAUSE_INV_STATE); \
- _ret = RFAILED; \
- } \
-}
-#endif /* ERRCLASS & ERRCLS_INT_PAR */
-
-/*******************************************************************************
- * Timer Defines
- ******************************************************************************/
-#define RLC_TMR_LEN 10
-#define RLC_MAX_UM_TMR 1
-#define RLC_MAX_AM_TMR 3
-#define RLC_MAX_THPT_TMR 1
-
-/* Timer events */
-#define EVENT_RLC_UMUL_REASSEMBLE_TMR 1
-#define EVENT_RLC_AMUL_REASSEMBLE_TMR 2
-#define EVENT_RLC_AMUL_STA_PROH_TMR 3
-#define EVENT_RLC_AMDL_POLL_RETX_TMR 4
-#define EVENT_RLC_WAIT_BNDCFM 5
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-#define EVENT_RLC_L2_TMR 6
-#endif /* LTE_L2_MEAS */
-#define EVENT_RLC_THROUGHPUT_TMR 7
-
-/*******************************************************************************
- * DBM Defines
- ******************************************************************************/
-/**
- * @def RLC_DBM_GET_RBCB_FROM_UECB
- *
- * This macro makes _rbCb point to the RB in _ueCb based on the passed
- * _rbId and _rbType. _rbCb can point to NULLP
- *
- * @param[in] _rbId RB Id of the RB to be fetched
- * @param[in] _rbType Type of the RB, SRB or DRB
- * @param[in] _ueCb Pointer to the UECb for which to get the RB
- * @param[out] _rbCb Pointer to the found RbCb
- *
-*/
-#define RLC_DBM_GET_RBCB_FROM_UECB(_rbId, _rbType, _ueCb, _rbCb) \
- (_rbCb) = ((_rbType) == CM_LTE_SRB) ? (_ueCb)->srbCb[(_rbId)] : \
- (_ueCb)->drbCb[(_rbId)];
-/**
- * @def RLC_DBM_GET_CELL_RBCB
- *
- * This macro makes _rbCb point to the RB in the _rbCbLst.
- * _rbCb can point to NULLP
- *
- * @param[in] _rbId RB Id of the RB to be fetched
- * @param[in] _rbCbLst Pointer to array of RBCbs
- * @param[out] _rbCb Pointer to the found RbCb
- *
-*/
-#define RLC_DBM_GET_CELL_RBCB(_rbId, _rbCbLst, _rbCb) \
- (_rbCb) = (_rbCbLst)[(_rbId)];
-
-/*******************************************************************************
- * UMM Defines
- ******************************************************************************/
-#define RLC_UMDL rbCb->m.umDl
-#define RLC_UMUL rbCb->m.umUl
-
-/* Sequence Number length defines */
-#define RLC_UM_CFG_6BIT_SN_LEN 1 /**< UM 6-bit Sequence number length
- in bytes*/
-#define RLC_UM_CFG_12BIT_SN_LEN 2 /**< UM 12-bit Sequence number length
- in bytes*/
-/* 5GNR */
-/* Sequence Number length defines */
-#define RLC_AM_CFG_12BIT_SN_LEN 1 /**< AM 12-bit Sequence number length
- in bytes*/
-#define RLC_AM_CFG_18BIT_SN_LEN 2 /**< AM 18-bit Sequence number length
- in bytes*/
-
-/**
- * @def RLC_RMV_MAC_HDR_SZ
- *
- * If PDU size is greater than 127, MAC header would be 3 bytes else 2 bytes
- *
- * @param[in,out] _pduSz Size of the pdu
- *
-*/
-#define RLC_RMV_MAC_HDR_SZ(_pduSz) (_pduSz) -= ((_pduSz) > 127) ? 3 : 2;
-
-/**
- * @def RLC_UM_GET_VALUE
- *
- * This macro is used to calculate the value of UM state variables used
- * in comparisons. VR(UH) - UM Window Size is taken as the base modulus.
- * Returns the modifed value
- *
- * @param[in] _val Value of the state variable
- * @param[in] _kwUmUl Um Uplink control block
- *
-*/
-#define RLC_UM_GET_VALUE(_val,_kwUmUl) \
- (((_val) - ((_kwUmUl).vrUh - (_kwUmUl).umWinSz)) & ((_kwUmUl).modBitMask))
-
-/*******************************************************************************
- * AMM Defines
- ******************************************************************************/
-#define RLC_AMDL rbCb->m.amDl
-#define RLC_AMUL rbCb->m.amUl
-
-/* PDU Types */
-#define RLC_DATA_PDU 1
-#define RLC_CNTRL_PDU 0
-
-#define RLC_FI_FIRST_SEG 0x02
-#define RLC_FI_LAST_SEG 0x01
-#define RLC_SI_FIRST_SEG 0x01
-#define RLC_SI_LAST_SEG 0x02
-#define RLC_SI_MID_SEG 0x03
-
-#define RLC_POLL_SET 0x40 /* 01000000 */
-#define RLC_POLL_UNSET 0xbf /* 10111111 */
-#define RLC_MAX_NACK_CNT 100
-/*RLC_MAX_CNTRL_FIELDS (Maximum size of Status Pdu)
- * = MAX_NACK_CNT * sizeof(NACK_SN,E1,E2,E3,soStart,soEnd, nackRange)
- * for 18 bit SN + Fixed Header*/
-#define RLC_MAX_CNTRL_FIELDS ((RLC_MAX_NACK_CNT * 8) + 3)
-
-/* Each LI(Length Indicator) holds approx 1+1/2 byte and some other fields thus keeping Header Size equal to twice of MAX LI */
-/* 5GNR_RLC: Need to change value of HDRSZ as per number of PDUs going in one datReq */
-#define RLC_MIN_HDRSZ 1
-#define RLC_MAX_HDRSZ 5
-#define RLC_AM_PDU_FIXED_HDRSZ 2
-#define RLC_AM_PDU_12BIT_SN_HDRSZ 2
-#define RLC_AM_PDU_18BIT_SN_HDRSZ 3
-#define RLC_AM_SEG_12BIT_SN_WITH_SO_HDRSZ 4
-#define RLC_AM_SEG_18BIT_SN_WITH_SO_HDRSZ 5
-#define RLC_AM_SEG_12BIT_SN_WITHOUT_SO_HDRSZ 2
-#define RLC_AM_SEG_18BIT_SN_WITHOUT_SO_HDRSZ 3
-#define RLC_EXTN_HDRSZ 2
-#define RLC_CNTRL_PDU_FIXED_HDRSZ 3
-#define RLC_MAC_HDR_SZ2 2
-#define RLC_MAC_HDR_SZ3 3
-#define RLC_BYTE_LEN 8
-#define RLC_2BYTE_LEN 16
-#define RLC_E1_LEN 1
-#define RLC_NACK_E1E2_LEN 12
-#define RLC_SO_LEN 15
-#define RLC_DC_LEN 1
-#define RLC_CPT_LEN 3
-#define RLC_RF_LEN 1
-#define RLC_P_LEN 1
-#define RLC_FI_LEN 2
-#define RLC_SI_LEN 2
-#define RLC_E_LEN 1
-#define RLC_SN_LEN 10
-#define RLC_SN_LEN_12BITS 12
-#define RLC_SN_LEN_18BITS 18
-#define RLC_LSF_LEN 1
-#define RLC_LI_LEN 11
-#define RLC_STA_PDU_R_BITS_ACKSN_12BITS 7 /* 5GNR : Num Reserved bits in STATUS PDU */
-#define RLC_STA_PDU_R_BITS_ACKSN_18BITS 1
-#define RLC_STA_PDU_R_BITS_NACKSN_12BITS 1
-#define RLC_STA_PDU_R_BITS_NACKSN_18BITS 3
-#define RLC_NACK_RANGE_LEN 8
-#define RLC_SO_LEN_5GNR 16
-
-#define RLC_DC_POS 0x80
-#define RLC_DC_SHT 7
-#define RLC_POLL_POS 0x40 /* 5GNR */
-#define RLC_POLL_SHT 6 /* 5GNR */
-#define RLC_SI_POS 0x30 /* 5GNR */
-#define RLC_SI_SHT 4 /* 5GNR */
-#define RLC_SN_POS_12BIT 0x0F
-#define RLC_SN_POS_18BIT 0x03
-#define RLC_AM_GET_WIN_SZ(_snLen) ((RLC_AM_CFG_12BIT_SN_LEN == (_snLen)) ? (2048) : (131072)) /* 5GNR */
-#define RLC_RCV_BUF_BIN_SIZE 512 /* receive buffer size */
-#define RLC_TX_BUF_BIN_SIZE 512 /* receive buffer size */
-
-#define RLC_SDU_LST 1
-#define RLC_SEG_LST 2
-#define RLC_RETX_LST 3
-#define RLC_ALL_BYTES_MISSING 0xffff
-
-#define RLC_MAX_PDU_MAP 30 /*!< Maximum PDU Map. */
-
-#define RLC_LLIST_FIRST_SDU(lstCp, nod) \
-{ \
- CmLList *tmpNode; \
- /*CM_LLIST_FIRST_NODE(&(lstCp), tmpNode);*/ \
- /*if (tmpNode != NULLP)*/ \
- if((tmpNode=cmLListFirst(&lstCp))) \
- nod = (RlcSdu *)tmpNode->node; \
- else \
- nod = NULLP; \
-}
-
-
-#define RLC_LLIST_FIRST_SEG(lstCp, nod) \
-{ \
- CmLList *tmpNode; \
- /*CM_LLIST_FIRST_NODE(&(lstCp), tmpNode);*/ \
- /*if (tmpNode != NULLP)*/ \
- if((tmpNode=cmLListFirst(&lstCp))) \
- nod = (RlcSeg *)tmpNode->node; \
- else \
- nod = NULLP; \
-}
-
-#define RLC_LLIST_FIRST_RETX(lstCp, nod) \
-{ \
- CmLList *tmpNode; \
- /*CM_LLIST_FIRST_NODE(&(lstCp), tmpNode);*/ \
- /*if (tmpNode != NULLP)*/ \
- if((tmpNode=cmLListFirst(&lstCp))) \
- nod = (RlcRetx *)tmpNode->node; \
- else \
- nod = NULLP; \
-}
-
-#define RLC_LLIST_NEXT_SDU(lstCp, nod) \
-{ \
- CmLList *tmpNode; \
- /*CM_LLIST_NEXT_NODE(&(lstCp), tmpNode);*/ \
- /*if (tmpNode != NULLP) */ \
- if((tmpNode = cmLListNext(&lstCp))) \
- nod = (RlcSdu *)tmpNode->node; \
- else \
- nod = NULLP; \
-}
-
-
-#define RLC_LLIST_NEXT_SEG(lstCp, nod) \
-{ \
- CmLList *tmpNode; \
- (lstCp).crnt = &((nod)->lstEnt); \
- /*CM_LLIST_NEXT_NODE(&(lstCp), tmpNode);*/ \
- /*if (tmpNode != NULLP)*/ \
- if((tmpNode = cmLListNext(&lstCp))) \
- nod = (RlcSeg *)tmpNode->node; \
- else \
- nod = NULLP; \
-}
-
-
-#define RLC_LLIST_NEXT_RETX(lstCp, nod) \
-{ \
- CmLList *tmpNode; \
- /*CM_LLIST_NEXT_NODE(&(lstCp), tmpNode);*/ \
- /*if (tmpNode != NULLP) */ \
- if ((tmpNode = cmLListNext(&lstCp))) \
- nod = (RlcRetx *)tmpNode->node; \
- else \
- nod = NULLP; \
-}
-
-
-#define RLC_LLIST_LAST_RETX(lstCp, nod) \
-{ \
- CmLList *tempNode = NULLP; \
- cmLListLast(&lstCp); \
- tempNode = cmLListCrnt(&lstCp); \
- if (tempNode != NULLP) \
- nod = (RlcRetx *)tempNode->node; \
- else \
- nod = NULLP; \
-}
-
-#define RLC_LLIST_LAST_SEG(lstCp, nod) \
-{ \
- CmLList *tempNode = NULLP; \
- cmLListLast(&lstCp); \
- tempNode = cmLListCrnt(&lstCp); \
- if (tempNode != NULLP) \
- nod = (RlcSeg *)tempNode->node; \
- else \
- nod = NULLP; \
-}
-
-#define RLC_LLIST_LAST_SDU(lstCp, nod) \
-{ \
- CmLList *tempNode = NULLP; \
- cmLListLast(&lstCp); \
- tempNode = cmLListCrnt(&lstCp); \
- if (tempNode != NULLP) \
- nod = (RlcSdu *)tempNode->node; \
- else \
- nod = NULLP; \
-}
-
-#define CM_LLIST_INS_AFT_CRNT(lstCp, nod) \
-{ \
- CmLList *nodeToIns = &nod->lstEnt;\
- nodeToIns->node = (PTR) nod;\
- cmLListInsAfterCrnt(&lstCp, nodeToIns); \
-}
-
-#define CM_LLIST_INS_BEF_CRNT(lstCp, nod) \
-{ \
- CmLList *nodeToIns = &nod->lstEnt; \
- nodeToIns->node = (PTR) nod; \
- cmLListInsCrnt(&lstCp, nodeToIns); \
-}
-
-#define RLC_LLIST_DEL_RECBUF(_recBuf) \
-{ \
- RlcSeg *_seg = NULLP; \
- RLC_LLIST_FIRST_SEG(_recBuf->segLst, _seg); \
- while (_seg) \
- { \
- cmLListDelFrm(&_recBuf->segLst, &_seg->lstEnt); \
- RLC_FREE(_seg, sizeof(RlcSeg)); \
- RLC_LLIST_NEXT_SEG(_recBuf->segLst, _seg); \
- } \
-}
-
-#define RLC_UMM_LLIST_FIRST_SEG(lstCp, nod) \
-{ \
- CmLList *tmpNode; \
- if((tmpNode=cmLListFirst(&lstCp))) \
- nod = (RlcUmSeg *)tmpNode->node; \
- else \
- nod = NULLP; \
-} /*!< um mode first segment of linked list*/
-
-#define RLC_UMM_LLIST_NEXT_SEG(lstCp, nod) \
-{ \
- CmLList *tmpNode; \
- (lstCp).crnt = &((nod)->lstEnt); \
- if((tmpNode = cmLListNext(&lstCp))) \
- nod = (RlcUmSeg *)tmpNode->node; \
- else \
- nod = NULLP; \
-}/*!< next segment in um mode linked list*/
-
-#define MODAMT(x, y, z,_snModMask) \
-{ \
- y = (x - z) & _snModMask; \
-}
-
-#define MODAMR(x, y, z , _snModMask) \
-{ \
- y = (x - z) & (_snModMask); \
-}
-
-/**
- * @def RLC_AM_IS_TRANS_WIN_STALLED
- *
- * This macro is used to check if the AM transmit window is stalled or not.
- * The tramist window is stalled when the distance between txNext and txNextAck
- * is greater than equal to Window Size. Actually it should never be greater
- * than Window Size.
- * Returns TRUE if the window is stalled else FALSE
- *
- * @param[in] _amDl AM Downlink control block
- *
-*/
-#define RLC_AM_IS_TRANS_WIN_STALLED(_amDl) \
- ((((_amDl)->txNext - (_amDl)->txNextAck) & _amDl->snModMask) >= (RLC_AM_GET_WIN_SZ(_amDl->snLen)))
-
-#ifdef TENB_STATS
-#define RLC_AM_TRANS_WIN_SIZE(_amDl) \
- (((_amDl)->txNext - (_amDl)->txNextAck) & _amDl->snModMask)
-#endif
-
-#define RLC_AM_IS_POLL_BIT_SET(_amDl) \
- (RLC_AMDL.pollSn == ((RLC_AMDL.txNext - 1) & RLC_AMDL.snModMask))
-
-#define RLC_FILL_CNTRL_INFO(cntrlInfo, _val, _len, _idx, _eb)\
-{ \
- cntrlInfo.val = _val; \
- cntrlInfo.len = _len; \
- cntrlInfo.idx = _idx; \
- cntrlInfo.emtBits = _eb; \
-}
-#define RLC_FILL_PREV_IDX(cntrlInfo, _e1Idx, _e1eb, _idx, _eb) \
-{ \
- _e1Idx = cntrlInfo.e1Idx; \
- _e1eb = cntrlInfo.e1eb; \
- _idx = cntrlInfo.idx; \
- _eb = cntrlInfo.emtBits; \
-}
-
-#define RLC_FILL_HDR_ARGS(hdrInfo, _val, _len) \
-{ \
- hdrInfo.val = _val; \
- hdrInfo.len = _len; \
-}
-
-/* kw003.201 - This macro provides the header size other than the */
-/* fixed header of 2 bytes for each AMD PDU or 4 bytes*/
-/* for an AM PDU segment */
-#define RLC_AM_EXTN_HDRSZ(_numLi, _eHdrSz) \
-{ \
- if ((_numLi - 1) % 2) \
- { \
- _eHdrSz = ((3 * (_numLi - 2)) >> 1) + 2; \
- } \
- else \
- { \
- _eHdrSz = (3 * (_numLi - 1)) >> 1; \
- } \
-}
-
-/* Update poll bit in the buffer */
-#define RLC_UPD_POLL_BIT(_gCb, _retx, _poll) \
-{ \
- uint8_t fHdr; \
- \
- if (_poll != _retx->amHdr.p) \
- { \
- /* Get the first byte of the buffer */ \
- SRemPreMsg((Data *)&fHdr, _retx->seg); \
- if (_poll == TRUE) \
- { \
- fHdr = fHdr | RLC_POLL_SET; \
- } \
- else \
- { \
- fHdr = fHdr & RLC_POLL_UNSET; \
- } \
- /* Concatenated updated hdr to the mBuf */ \
- SAddPreMsg ((Data)fHdr, _retx->seg); \
- } \
- /* Update poll bit in the hdrInfo */ \
- _retx->amHdr.p = _poll; \
-}
-
-#define RLC_AM_ELIMINATE_EXTN_HDR(_pduSz, _sduSz, _numLi) \
-{ \
- if ( (_pduSz > _sduSz) && (_sduSz < 2048) ) \
- { \
- _pduSz -= (_numLi % 2) ? 1 : 2; \
- } \
-}
-/**
- * @def RLC_AM_CHK_SN_WITHIN_RECV_WINDOW
- *
- * This macro is used to check if a Sequence Number falls within the AM
- * reception window or not.
- * The condition is VR(R) <= SN < VR(MR), which are subtracting the base
- * modulus becomes 0 <= (SN - VR(R)) % SNLen < (VR(MR) - VR(R)) % SnLen
- * NOTE: Careful with the parantheses
- *
- * Returns TRUE if within the window; FALSE otherwise
- *
- * @param[in] _sn The sequence number to be checked
- * @param[in] _amUl AM Uplink control block
- *
-*/
-#define RLC_AM_CHK_SN_WITHIN_RECV_WINDOW(_sn, _amUl) \
- ((((_sn) - (_amUl->rxNext)) & (_amUl->snModMask)) < (((_amUl->vrMr) - (_amUl->rxNext)) & (_amUl->snModMask)))
-
-#define RLC_POWER(x, y) x << (y-1);
-
-#ifndef L2_OPTMZ
-#define rlcCpyMsg(_cb,x, y) \
- (SAddMsgRef((x), RLC_GET_MEM_REGION(_cb), RLC_GET_MEM_POOL(_cb), (y)))
-#else
-/* L2 optimization for mUe/Tti: Removing dup buf*/
-#define rlcCpyMsg(_cb,x, y) \
- (SIncMsgRef((x), RLC_GET_MEM_REGION(_cb), RLC_GET_MEM_POOL(_cb), (y)))
-#endif
-
-// printf("Copy Msg %x \n",x);
-
-/*******************************************************************************
- * Debugging Defines
- ******************************************************************************/
-#define RLC_DBG_SUB_MASK DBGMASK_MI /**< Use for sub-mask */
-#define RLC_DBGMASK_DETAIL (RLC_DBG_SUB_MASK << 0) /**< Parameters, It will give
- in depth info */
-#define RLC_DBGMASK_BRIEF (RLC_DBG_SUB_MASK << 1) /**< Info, It will give info at
- entry and exit places along
- with certain state changes */
-#define RLC_DBGMASK_ERROR (RLC_DBG_SUB_MASK << 2) /**< Error information */
-#define RLC_DBGMASK_FATAL (RLC_DBG_SUB_MASK << 3) /**< FATAL errors like memory
- resource failure etc., */
-
-#define RLC_DBG_MDL_MASK (RLC_DBG_SUB_MASK << 4)
-
-#define RLC_DBGMASK_TM (RLC_DBG_MDL_MASK << 0) /**< TM */
-#define RLC_DBGMASK_UM (RLC_DBG_MDL_MASK << 1) /**< UM */
-#define RLC_DBGMASK_AM (RLC_DBG_MDL_MASK << 2) /**< AM */
-#define RLC_DBGMASK_DL (RLC_DBG_MDL_MASK << 3) /**< DL */
-#define RLC_DBGMASK_UL (RLC_DBG_MDL_MASK << 4) /**< UL */
-#define RLC_DBGMASK_CFG (RLC_DBG_MDL_MASK << 5) /**< CFG */
-#define RLC_DBGMASK_LMM (RLC_DBG_MDL_MASK << 6) /**< LMM */
-#define RLC_DBGMASK_INF (RLC_DBG_MDL_MASK << 7) /**< UI, LI */
-#define RLC_DBGMASK_DUT (RLC_DBG_MDL_MASK << 8) /**< DBM, UTL, TMR */
-#define RLC_DBGMASK_MBUF_PRNT (RLC_DBG_MDL_MASK << 9) /**< MBUF, useful in
- integrated
- testing */
-#define RLC_DBGMASK_MEM_INFO (RLC_DBG_MDL_MASK << 10) /**< Print SSI memory
- information*/
-#define RLC_DBGMASK_UDX (RLC_DBG_MDL_MASK << 11) /**< UDX interface */
-
-#ifdef DEBUGP
-#define RLC_PRNT_BORDER \
-do \
-{ \
- RLC_PRNT((_kwPBuf, "\n==========================\n")); \
-}while(0)
-
-#define RLC_PRNT_HLINE(_cb,_pMsg) \
-{ \
- sprintf((_cb)->init.prntBuf, "[RLC_LAYER: %s:%d]::", __FILE__, __LINE__); \
- SPrint((_cb)->init.prntBuf); \
- RLC_PRNT_TSTAMP(_cb); \
- sprintf((_cb)->init.prntBuf, _pMsg); \
- SPrint((_cb)->init.prntBuf); \
-}
-
-#define RLC_PRNT(_cb,_prntbuf) \
-{ \
- sprintf _prntbuf; \
- SPrint(_cb->init.prntBuf); \
-}
-
-#define RLC_PRINT_TO_BUFFER(_cb,...) \
-{ \
- snprintf((_cb)->init.prntBuf, PRNTSZE, "[%s]::", __func__); \
- SPrint((_cb)->init.prntBuf); \
- snprintf(_cb->init.prntBuf, PRNTSZE,__VA_ARGS__); \
- SPrint(_cb->init.prntBuf); \
-}
-
-#define RLC_PRNT_TSTAMP(_cb) \
-{ \
- S8 _buf[60]; \
- DateTime dt; \
- memset((&dt), 0, sizeof(DateTime)); \
- SGetDateTime(&dt); \
- sprintf(_buf, "date: %02d/%02d/%04d time: %02d:%02d:%02d", \
- (int)dt.month,(int)dt.day,(int)dt.year + 1900, \
- (int)dt.hour,(int)dt.min,(int)dt.sec); \
- RLC_PRNT(_cb,(_cb->init.prntBuf,("[%s]", _buf))); \
-}
-
-#define RLC_PRNT_MBUF(_cb,_mBufPtr) \
-do \
-{ \
- if(_cb->init.dbgMask & (RLC_DBGMASK_MBUF_PRNT)) \
- { \
- RLC_PRNT_HLINE(_cb,("\nMessage Buffer Contents:\n")); \
- SPrntMsg ((Buffer *)_mBufPtr, 0, 0); \
- } \
-}while(0)
-
-#define RLC_PRNT_MEMINFO(_cb) \
-do \
-{ \
- uint32_t _memInfo; \
- if(_cb->init.dbgMask & (RLC_DBGMASK_MEM_INFO)) \
- { \
- RLC_PRNT_HLINE(_cb,("\nMemory Information:\n")); \
- SRegInfoShow(0, &_memInfo); \
- } \
-}while(0)
-
-#define RLCDBGP_INTERNAL(_cb,_mask,...) \
-do \
-{ \
- if (!((_cb->init.dbgMask & _mask) ^ _mask)) \
- { \
- RLC_PRINT_TO_BUFFER(_cb, __VA_ARGS__); \
- } \
-}while(0)
-
-#define RLCDBGP_ERROR(_cb, ...) \
- RLCDBGP_INTERNAL(_cb,(RLC_DBGMASK_ERROR | RLC_MODULE),__VA_ARGS__)
-
-#define RLCDBGP_DETAIL(_cb, ...) \
- RLCDBGP_INTERNAL(_cb,(RLC_DBGMASK_DETAIL | RLC_MODULE),__VA_ARGS__)
-
-#define RLCDBGP_BRIEF(_cb, ...) \
- RLCDBGP_INTERNAL(_cb,(RLC_DBGMASK_BRIEF | RLC_MODULE),__VA_ARGS__)
-
-#else /* DEBUGP */
-#define RLC_PRNT_HLINE(_cb,_pMsg)
-#define RLC_PRNT(_cb,_prntbuf)
-#define RLC_PRNT_TSTAMP(_cb)
-#define RLC_PRNT_MBUF(_cb,_mBufPtr)
-#define RLC_PRNT_MEMINFO(_cb)
-#define RLCDBGP(_cb,_mask, _arg)
-#define RLCDBGP_ERROR(_cb, ...)
-#define RLCDBGP_DETAIL(_cb, ...)
-#define RLCDBGP_BRIEF(_cb, ...)
-#endif /* DEBUGP */
-
-/*******************************************************************************
- * LMM Defines
- ******************************************************************************/
-#define RLC_LMM_RB_STS_INC(_cb) (_cb)->genSts.numOfRb++;
-
-#define RLC_LMM_RB_STS_DEC(_cb) (_cb)->genSts.numOfRb--;
-
-#if defined(SS_MULTICORE_SUPPORT) && defined(SS_M_PROTO_REGION)
-#define RLC_FILL_SAP_HELPER(_Sap, _cfg, _gCb)\
-{\
- _Sap->pst.selector = _cfg->selector; \
- _Sap->pst.route = _cfg->route; \
- _Sap->pst.prior = _cfg->priority; \
- _Sap->pst.region = _gCb->init.region;\
- _Sap->pst.pool = _gCb->init.pool;\
- _Sap->pst.dstProcId = _cfg->procId; \
- _Sap->pst.dstEnt = _cfg->ent; \
- _Sap->pst.dstInst = _cfg->inst; \
- _Sap->pst.srcProcId = _gCb->init.procId; \
- _Sap->pst.srcEnt = _gCb->init.ent; \
- _Sap->pst.srcInst = _gCb->init.inst; \
- _Sap->pst.event = EVTNONE; \
- _Sap->spId = _cfg->sapId; \
- _Sap->state = RLC_SAP_CFG; \
-}
-#else /* defined(SS_MULTICORE_SUPPORT) && defined(SS_M_PROTO_REGION) */
-#define RLC_FILL_SAP_HELPER(_Sap, _cfg, _gCb)\
-{\
- _Sap->pst.selector = _cfg->selector; \
- _Sap->pst.route = _cfg->route; \
- _Sap->pst.prior = _cfg->priority; \
- _Sap->pst.region = _cfg->mem.region;\
- _Sap->pst.pool = _cfg->mem.pool;\
- _Sap->pst.dstProcId = _cfg->procId;\
- _Sap->pst.dstEnt = _cfg->ent;\
- _Sap->pst.dstInst = _cfg->inst;\
- _Sap->pst.srcProcId = _gCb->init.procId;\
- _Sap->pst.srcEnt = _gCb->init.ent;\
- _Sap->pst.srcInst = _gCb->init.inst;\
- _Sap->pst.event = EVTNONE;\
- _Sap->spId = _cfg->sapId;\
- _Sap->state = RLC_SAP_CFG;\
-}
-#endif
-
-/*******************************************************************************
- * UDX Defines
- ******************************************************************************/
-#define RLC_GET_DL_SAPCB(_cb, _rbCb) (_cb->u.dlCb->udxDlSap + _rbCb->udxSapId)
-#define RLC_GET_UDX_SAP(_cb) (_cb->u.ulCb->udxUlSap)
-
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-#define RLC_L2_MAX_TIMERS 1
-#define RLC_QCI_LIST_BUCKET_SIZE 10
-#define RLC_TB_LIST_BUCKET_SIZE 10
-#define RLC_MAX_L2MEAS_EVT 10
-/* L2 Measurement index to be used in rbCb to store measData */
-#define RLC_L2MEAS_ACT_UE 0
-#define RLC_L2MEAS_DL_DELAY 1
-#define RLC_L2MEAS_DL_DISC 2
-#define RLC_L2MEAS_UU_LOSS 3
-#define RLC_L2MEAS_DL_IP 4
-#define RLC_L2MEAS_UL_IP 5
-#endif /* LTE_L2_MEAS */
-
-#define RLC_RDWR_LOCK(_lockPtr)
-#define RLC_RDWR_UNLOCK(_lockPtr)
-#define RLC_TIME_DIFF(t1,t2) \
- (t1<t2 ? ((0xffffffff - t2) + t1 ): (t1 - t2))
-
-#endif /* __KWH__ */
-\f
-/********************************************************************30**
-
- End of file
-**********************************************************************/
+++ /dev/null
-/*******************************************************************************
-################################################################################
-# Copyright (c) [2017-2019] [Radisys] #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-*******************************************************************************/
-
-/********************************************************************20**
-
- Name: NR RLC file
-
- Type: C include file
-
- Desc: This file contains all the data structures and
- prototypes for RLC.
-
- File: kw.x
-
-*********************************************************************21*/
-/** @file kw.x
-@brief RLC Product Structures, prototypes
-*/
-
-#ifndef __KWX__
-#define __KWX__
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/** @brief Local typedefs */
-typedef uint32_t RlcSn; /*!< Sequence Number length */
-
-typedef RguDDatIndInfo KwDatIndInfo;
-
-typedef RguDStaIndInfo KwDStaIndInfo;
-
-typedef RguPduInfo KwPduInfo; /* kw002.201 : Aligning the structure with RGU */
-
-typedef struct _amRlcStats
-{
- uint32_t numDLStaPduSent;
- uint32_t numDLNacksInStaPdu;
- uint32_t numDLBytesUnused;
- uint32_t numDLPollTimerExpiresSrb;
- uint32_t numDLPollTimerExpiresDrb;
- uint32_t numDLMaxRetx;
- uint32_t numDLRetransPdus;
- uint32_t numULPdusDiscarded;
- uint32_t numULReAsmblTimerExpires;
- uint32_t numULStaPduRcvd;
- uint32_t numULNackInStaPduRcvd;
- uint32_t numRlcAmCellSduTx; /* Count of SDUs transmitted in DL for all UEs */
- uint32_t numRlcAmCellSduBytesTx; /*Total number of bytes transmitted in DL for all Ues */
- uint32_t numRlcAmCellRetxPdu; /*Count of PDUs retransmitted for all Ues */
- uint32_t numRlcAmMaxRetx; /*Total number of Max-RLC retransmissions hit for all the Ues */
- uint32_t numRlcAmCellDupPduRx; /*Count of Duplicate PDUs detected for a UE in UL for all Ues */
- uint32_t numRlcAmCellDropOutWinRx; /*Count of PDUs dropped due to Out of Window reception for all Ues */
- uint32_t numRlcAmCellSduRx; /* Count of SDUs received in UL for all UEs*/
- uint32_t numRlcAmCellSduBytesRx;/*Total number of bytes received in UL for all Ues*/
- uint32_t numRlcAmCellNackRx; /*Total number of UL PDUs nacked for all the Ues*/
- uint32_t numRlcAmCellWinStall; /*Number of window stalls detected for all the Ues */
-}AMRLCStats;
-
-typedef struct _umRlcStats
-{
- uint32_t numDLBytesUnused;
- uint32_t numDLMaxRetx;
- uint32_t numULPdusDiscarded;
- uint32_t numULReAsmblTimerExpires;
- uint32_t numULPdusOutsideWindow;
-}UMRLCStats;
-
-typedef struct _rlcStats
-{
- AMRLCStats amRlcStats;
- UMRLCStats umRlcStats;
-}RLCStats;
-
-RLCStats gRlcStats;
-
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-typedef struct rlcSduSnMap RlcSduSnMap;
-typedef RguLchMapInfo KwLchMapInfo;
-#endif /* LTE_L2_MEAS */
-
-/** @defgroup ummode UM Module Info
-*/
-/**
- * @brief Structure to hold an Unacknowledged Mode header
- *
- * @details
- * - si : Segmentation Info
- * - sn : Sequence number
- * - so : Segmentation offset
-*/
-typedef struct rlcUmHdr
-{
- uint8_t si; /*!< Segmentation Info */
- RlcSn sn; /*!< Sequence number */
- uint16_t so; /*!< Segmentation offset */
-}RlcUmHdr;
-
-/**
- * @brief Structure to hold an Acknowledged Mode header
- *
- * @details
- * - dc : Data/Control PDU
- * - rf : Resegmentation flag
- * - p : Poll bit
- * - fi : Framing Info
- * - e : Extension bit
- * - lsf : Last segment flat
- * - sn : Sequence number
- * - so : Segment offset
- * - numLi : Number of length indicators in the following array (li)
- * - li : Length indicators
-*/
-typedef struct rlcAmHdr
-{
- uint8_t dc; /*!< Data/Control PDU */
- uint8_t p; /*!< Poll bit */
- uint8_t si; /*!< Segmentation Info: 5GNR */
- RlcSn sn; /*!< Sequence number */
- uint32_t so; /*!< Segment offset */
-}RlcAmHdr;
-
-/* structures used for encoding/decoding the headers */
-typedef struct rlcCntrlInfo
-{
- uint16_t val;
- uint8_t len;
- uint16_t idx;
- uint8_t emtBits;
- uint16_t e1Idx;
- uint16_t e2Idx;
- uint8_t e1eb;
-}RlcCntrlInfo;
-
-typedef struct rlcHdrInfo
-{
- uint32_t val;
- uint8_t len;
- uint8_t eb;
- uint8_t *hdr;
- uint16_t idx;
- uint8_t pEb;
- uint8_t pLen;
-}RlcHdrInfo;
-
-typedef struct rlcExtHdr
-{
- uint32_t val;
- uint16_t len;
- uint8_t hdr;
- uint8_t pLen;
-}RlcExtHdr;
-
-/**
- * @brief Structure to hold information about a Logical channel
- *
- * @details
- * - lChId : Logical channel Id
- * - lChType : Logical channel type
-*/
-typedef struct rlcLchInfo
-{
- CmLteLcId lChId; /*!< Logical channel Id */
- CmLteLcType lChType; /*!< Logical channel type */
-}RlcLchInfo;
-
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-
-/** @struct RlcL2Cntr
- * RLC L2 Counter */
-typedef struct rlcL2Cntr
-{
- struct
- {
- uint32_t numActvUe; /*!< number of active Ue */
- uint32_t sampOc; /*!< Total number of sampling occasion */
- }actUe;
- struct
- {
- uint32_t dLoss; /*!< Total number of lost packets */
- uint32_t posPkts; /*!< Total number of positively acknowlegded
- packets */
- }uuLoss;
- struct /*!< For DL IP throughput */
- {
- uint32_t volSummation; /*!< Sum of data in bytes */
- uint32_t timeSummation; /*!< Sum of time difference in milli sec*/
- }dlIpThruput;
- struct /*!< For UL IP throughput */
- {
- uint32_t volSummation; /*!< Sum of data in bytes */
- uint32_t timeSummation; /*!< Sum of time difference in milli sec*/
- }ulIpThruput;
- /* Discard new changes starts */
- struct /*!< For UL IP throughput */
- {
- uint32_t discSdus; /*!< Total RLC SDUs discarded */
- uint32_t totSdus; /*!< Total RLC SDUs received */
- }dlDisc;
- struct /*!< For UL IP throughput */
- {
- uint64_t sduDelay; /*!< Total SDUs delay */
- uint32_t numSdus;
- }dlPjSduDelay;
- uint32_t totDrbsPerQci; /*!< Total Count of DRB's for this QCI */
-}RlcL2Cntr;
-
-struct rlcSduSnMap
-{
- CmLList lstEnt;
- Bool failMarked;
- Bool fullySent;
- uint32_t sduId;
- uint16_t numSn;
- uint16_t snList[RLC_MAX_PDU_MAP];
- uint16_t harqAck;
- uint16_t reqSent;
- uint16_t rspRcvd;
-};
-
-typedef struct rlcSnSduMap
-{
- uint16_t sn;
- CmLteLcId lChId; /*!< Logical channel Id */
- uint16_t numSdu;
-#ifdef LTE_RLC_R9
- Bool isBurstSplitted; /*!< true: burst for this LCH is splitted */
-#endif /* LTE_RLC_R9 */
- RlcSduSnMap *sduList[RLC_MAX_DL_LI];
-}RlcSnSduMap;
-
-typedef struct rlcTbSnMap
-{
- CmHashListEnt hlTbEnt;
- uint32_t tbId;
- uint16_t prevNumSn;
- uint16_t numSn;
- RlcSnSduMap snSduMap[RGU_MAX_PDU * RGU_MAX_LC];
-}RlcTbSnMap;
-
-typedef struct rlcL2MeasCbUeMeasInfo
-{
- CmLteRnti ueId; /*!< UE ID (Used only for IP Throughput
- in UL/DL */
- CmLteCellId cellId; /*!< UE ID (Used only for IP Throughput
- in UL/DL */
- Bool isValid; /*! < is this UE entry valid */
- uint8_t numLcId; /*!< Holds the number of LCh for which Ul Ip
- measurement is ON */
- uint8_t lcId[RLC_MAX_LCH_PER_UE]; /*!< Holds the list of LCh for which Ul ip
- measurement is ON */
- RlcL2Cntr measData[LKW_MAX_QCI];
- uint16_t numQci; /*!< number of valid qcI */
- uint8_t qci[LKW_MAX_QCI]; /*!< list of valid qcI */
-}RlcL2MeasCbUeMeasInfo;
-
-typedef struct rlcL2MeasCbIpThMeas
-{
- uint8_t numUes;
- uint8_t totNumQci;
- uint8_t totQci[LKW_MAX_QCI];
- RlcL2MeasCbUeMeasInfo ueInfoLst[LKW_MAX_UE]; /*Added for handling meas for multiple ues*/
-}RlcL2MeasCbIpThMeas;
-
-typedef struct rlcL2MeasCbNonIpThMeas
-{
- uint16_t numSamples; /*!< Number of samples to take on numActUe */
- uint16_t numQci; /*!< number of valid qcI */
- uint8_t qci[LKW_MAX_QCI]; /*!< list of valid qcI */
- RlcL2Cntr measData[LKW_MAX_QCI]; /*!< Measurement CB */
-}RlcL2MeasCbNonIpThMeas;
-
-typedef union rlcL2MeasCbIpNonIpThMeasVal
-{
- RlcL2MeasCbIpThMeas ipThMeas;
- RlcL2MeasCbNonIpThMeas nonIpThMeas;
-}RlcL2MeasCbIpNonIpThMeasVal;
-
-/** @struct RlcL2MeasCb
- * RLC L2 Measurement CB */
-typedef struct rlcL2MeasCb
-{
- uint8_t measType; /*!< Bit-wise set measurement types */
- RlcL2MeasCbIpNonIpThMeasVal val; /* Union of IP tpt or non-ip tpt */
-}RlcL2MeasCb;
-
-/** @struct RlcL2MeasEvtCb
- * RLC L2 Measurement Evt CB */
-typedef struct rlcL2MeasEvtCb
-{
- uint32_t transId; /*!< TransId of Measurement Req */
- uint32_t cbIdx; /*!< TransId of Measurement Req */
- CmTimer l2Tmr; /* NOT USED */ /*!< L2 Timer per request */
- TmrCfg l2TmrCfg; /* NOT USED */ /*!< Time period of measurement */
- RlcL2MeasCb measCb; /*!< Measurement CB */
- EpcTime startTime; /* NOT USED */ /*!< start time when meas starts*/
-}RlcL2MeasEvtCb;
-
-/** @struct RlcL2MeasRbCb
- * RLC L2 Measurement Rb CB */
-typedef struct rlcL2MeasRbCb
-{
- uint8_t measOn; /*!< Measurements that are running */
- RlcL2Cntr *l2Sts[RLC_MAX_L2MEAS_EVT]; /*!< L2 Mesurement statistics */
-}RlcL2MeasRbCb;
-
-/** @struct RlcL2Cb
- * RLC L2 CB */
-typedef struct rlcL2Cb
-{
- uint16_t rlcNumMeas; /*!< Number of measurements going on */
- RlcL2MeasEvtCb rlcL2EvtCb[LKW_MAX_L2MEAS]; /*!< Pointers to Measurement Cb */
- uint8_t measOn[LKW_MAX_QCI]; /*!< Measurement on */
- uint32_t numActUe[LKW_MAX_QCI]; /*!< Measurement on */
-}RlcL2Cb;
-
-
-typedef enum _dlIpThrputState
-{
- KW_DL_IPTHRU_RESET = 0,
- KW_DL_IPTHRU_BURST_STARTED,
- KW_DL_IPTHRU_BURST_CONTINUE,
- KW_DL_IPTHRU_BURST_COMPLETED
-}DlIpThrputState;
-
-/**
-* @struct rlcL2MeasSduLst
-* Structure to hold parameters of
-* burst sdus in DL for a RB */
-typedef struct rlcOutStngSduInfo
-{
- uint32_t sduId; /*!< SDU Id of sdu */
- MsgLen sduLen; /*!< Size of sdu */
- uint32_t numTb; /*!< Hold the number of TBs for this sdu in DL */
-}RlcOutStngSduInfo;
-
-/**
-* @struct rlcL2MeasDlIpTh
-* Structure to hold parameters for DL ip
-* throughput for a RB */
-typedef struct rlcL2MeasDlIpTh
-{
- Bool isBurstAct; /*!< Set to TRUE when burst is active in DL */
- uint64_t burstStartTime; /*!< Holds the starting time of the burst */
- uint32_t burstEndSduId; /*!< Sdu ID when burst ends */
- uint8_t lastSduIdx; /*!< Holds the index of last outStanding sdu */
- RlcOutStngSduInfo outStngSduArr[RLC_L2MEAS_MAX_OUTSTNGSDU];/*!< Hold the burst sdu information */
-}RlcL2MeasDlIpTh;
-
-/**
-* @struct rlcL2MeasIpThruput
-* Structure to hold parameters for UL/DL ip
-* throughput for a RB */
-typedef struct rlcL2MeasIpThruput
-{
- uint32_t dataVol; /*!< Holds volume of new data in bytes
- for UL IP throughput */
- uint32_t ttiCnt; /*!< Holds ttiCnt received from MAC in UL */
- uint32_t prevTtiCnt; /*!< Holds previous ttiCnt received from MAC in UL */
- RlcL2MeasDlIpTh dlIpTh;
-}RlcL2MeasIpThruput;
-
-#endif /* LTE_L2_MEAS */
-
-/**
- * @brief Structure to hold an UE key for the UE hast lists
- *
- * @details
- * - ueId : UE Id
- * - cellId : Cell Id
-*/
-typedef struct rlcUeKey
-{
- CmLteRnti ueId; /*!< UE Id */
- CmLteCellId cellId; /*!< Cell Id */
-}RlcUeKey;
-
-/**
- * @brief Structure to hold an information about the CKW SAP
- *
- * @details
- * - pst : Service user post structure
- * - spId : Service provider Id
- * - suId : Service user Id
- * - state : State of the SAP
- * - sts : SAP specific statistics
-*/
-typedef struct rlcCkwSapCb
-{
- Pst pst; /*!< Service user post structure */
- SpId spId; /*!< Service provider Id */
- SuId suId; /*!< Service user Id */
- uint8_t state; /*!< Sap Status */
- RlcCkwCntSts sts; /*!< Statistics */
-}RlcCkwSapCb;
-
-/**
- * @brief Structure to hold an information about the KWU SAP
- *
- * @details
- * - pst : Service user post structure
- * - spId : Service provider Id
- * - suId : Service user Id
- * - state : State of the SAP
- * - sts : SAP specific statistics
-*/
-typedef struct rlcKwuSapCb
-{
- Pst pst; /*!< Service user post structure */
- SpId spId; /*!< Service provider Id */
- SuId suId; /*!< Service user Id */
- uint8_t state; /*!< Sap Status */
- RlcKwuSapSts sts; /*!< Statistics */
-}RlcKwuSapCb;
-
-/**
- * @brief Structure to hold an information about the RGU SAP
- *
- * @details
- * - pst : Service user post structure
- * - spId : Service provider Id
- * - suId : Service user Id
- * - state : State of the SAP
- * - bndTmr : Bind Timer
- * - bndTmrInt : Timer Interval
- * - retryCnt : Bind Retry Count
-*/
-typedef struct rlcRguSapCb
-{
- Pst pst; /*!< Service user post structure */
- SpId spId; /*!< Service provider Id */
- SuId suId; /*!< Service user Id */
- uint8_t state; /*!< Sap Status */
- CmTimer bndTmr; /*!< Bind Timer */
- uint16_t bndTmrInt; /*!< Timer Interval */
- uint8_t retryCnt; /*!< Bind Retry Count */
-}RlcRguSapCb;
-
-/**
- * @brief Structure to hold an information about the UDX UL SAP
- *
- * @details
- * - pst : Service user post structure
- * - spId : Service provider Id
- * - suId : Service user Id
- * - state : State of the SAP
- * - bndTmr : Bind Timer
- * - bndTmrInt : Timer Interval
- * - retryCnt : Bind Retry Count
-*/
-typedef struct rlcUdxUlSapCb
-{
- Pst pst; /*!< Service user post structure */
- SpId spId; /*!< Service provider Id */
- SuId suId; /*!< Service user Id */
- uint8_t state; /*!< Sap Status */
- CmTimer bndTmr; /*!< Bind Timer */
- uint16_t bndTmrInt; /*!< Timer Interval */
- uint8_t retryCnt; /*!< Bind Retry Count */
-}RlcUdxUlSapCb;
-
-/**
- * @brief Structure to hold an information about the UDX DL SAP
- *
- * @details
- * - pst : Service user post structure
- * - spId : Service provider Id
- * - suId : Service user Id
- * - state : State of the SAP
-*/
-typedef struct rlcUdxDlSapCb
-{
- Pst pst; /*!< Service user post structure */
- SpId spId; /*!< Service provider Id */
- SuId suId; /*!< Service user Id */
- uint8_t state; /*!< Sap Status */
-}RlcUdxDlSapCb;
-
-/**
- * @brief Structure to hold info about memory to be freed
- *
- * @details
- * - sduLst : The SDU queues are appended to this queue, used
- * for the UM SDU queues
- * - txLst : Stores to be released AM Mode TX PDUs
- * - reTxLst : Stores to be released AM Re TX PDU's
- * - rbLst : List of AM DL RBs to be freed
-*/
-typedef struct rlcDlDataToBeFreed
-{
- CmLListCp sduLst; /*!< Queue of SDU's to be freed */
- CmLListCp txLst; /*!< Stores to be released TX PDUs */
- CmLListCp reTxLst; /*!< Stores to be released ReTX PDUs */
- CmLListCp rbLst; /*!< List of AM DL RBs to be freed */
-}RlcDlDataToBeFreed;
-
-/**
- * @brief Structure to hold an information about DL RLC instance
- *
- * @details
- * - numKwuSaps : Number of RLC KWU Saps
- * - numUdxSaps : Number of RLC UDX Saps
- * - rlcKwuDlSap : Pointer to the array of KWU SAPS
- * - udxDlSap : Pointer to the array of UDX SAPS
- * - rguDlSap : RGU Sap Control Block
- * - cellLstCp : Hashlist of CellCb
- * - ueLstCp : Hashlist of UeCb
- * - toBeFreed : Pointer to data to be freed
- * - shutdownReveived : Request for shutdown recevied or not
- * - eventInQueue : Event for cleanup exists in queue or not
- */
-typedef struct rlcDlCb
-{
- uint8_t numKwuSaps; /*!< Number of RLC Data Saps */
- uint8_t numUdxSaps; /*!< Number of RLC Data Saps */
- RlcKwuSapCb *rlcKwuDlSap; /*!< KWU Sap Control Block */
- RlcUdxDlSapCb *udxDlSap; /*!< UDX DL Sap Control Block */
- RlcRguSapCb *rguDlSap; /*!< RGU Sap Control Block */
- CmHashListCp cellLstCp; /*!< Hashlist of CellCb */
- CmHashListCp ueLstCp; /*!< Hashlist of UeCb */
- RlcDlDataToBeFreed toBeFreed; /*!< Pointer to data to be freed */
- Pst selfPst; /*!< Pst to post events to self */
- Buffer *selfPstMBuf; /*!< Buffer used for self post */
- Bool shutdownReceived; /*!< Request for shutdown recevied */
- Bool eventInQueue; /*!< Event exists in queue or not */
-#ifdef LTE_L2_MEAS
- RlcL2Cb rlcL2Cb; /*!< Control Block for L2 Measurements in RLC */
-#endif /* LTE_L2_MEAS */
-}RlcDlCb;
-
-/**
- * @brief Structure to hold an information about UL RLC instance
- *
- * @details
- * - ckwSap : CKW Sap Conrol Block
- * - numKwuSaps : Number of RLC KWU Saps
- * - numUdxSaps : Number of RLC UDX Saps
- * - udxUlSap : Pointer to the array of UDX SAPS
- * - rlcKwuUlSap : Pointer to the array of KWU SAPS
- * - rguUlSap : RGU Sap Control Block
- * - cellLstCp : Hashlist of CellCb
- * - ueLstCp : Hashlist of UeCb
- * - transIdLstCp : Hashlist of cfg trans
- */
-typedef struct rlcUlCb
-{
- RlcCkwSapCb ckwSap; /*!< CKW Sap Conrol Block */
- uint8_t numKwuSaps; /*!< Number of RLC Data Saps */
- uint8_t numUdxSaps; /*!< Number of RLC Data Saps */
- RlcUdxUlSapCb *udxUlSap; /*!< UDX DL Sap Control Block */
- RlcKwuSapCb *rlcKwuUlSap; /*!< KWU Sap Control Block */
- RlcRguSapCb *rguUlSap; /*!< RGU Sap Control Block */
- CmHashListCp cellLstCp; /*!< Hashlist of CellCb */
- CmHashListCp ueLstCp; /*!< Hashlist of UeCb */
- CmHashListCp transIdLstCp; /*!< Hashlist of cfg trans */
- uint8_t rlcUlUdxEventType; /*!<Ue Create/ReConfig> */
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
- RlcL2Cb rlcL2Cb; /*!< Control Block for L2 Measurements in RLC */
-#endif /* LTE_L2_MEAS */
-}RlcUlCb;
-
-typedef struct rlcThptPerUe
-{
- uint16_t ueIdx;
- uint64_t dataVol;
-}RlcThptPerUe;
-
-/**
- * @brief Structure to hold information about throughput at RLC
- *
- */
-typedef struct rlcThpt
-{
- Inst inst; /* RLC instance */
- CmTimer thptTmr; /* Throughput Timer */
- uint8_t numActvUe; /* Number of Active UEs */
- RlcThptPerUe thptPerUe[MAX_NUM_UE]; /* Throughput calculated per UE */
-}RlcThpt;
-
-/**
- * @brief Structure to hold an information about a RLC instance
- *
- * @details
- * - init : Task Initialization Info
- * - genCfg : General Configuration
- * - genSts : General Statistics
- * - trcLen : Trace Length
- * - trcMask : Trace Mask
- * - rlcTq : Timer queue
- * - rlcTqCp : Timer queue control point
- * - u : Union depending on whether the instance is UL or DL
- * - ulCb : UL instance Control Block
- * - dlCb : DL instance Control Block
- */
-typedef struct rlcCb
-{
- TskInit init; /*!< Task Initialization Info */
- RlcGenCfg genCfg; /*!< General Configuration Structure */
- RlcGenSts genSts; /*!< General Statistics */
- S16 trcLen; /*!< Trace Length */
- uint8_t trcMask; /*!< Trace Mask */
- CmTqType rlcTq[RLC_TMR_LEN]; /*!< Timer queue */
- CmTqCp rlcTqCp; /*!< Timer queue control point */
- union
- {
- RlcUlCb *ulCb; /*!< Ul Control Block */
- RlcDlCb *dlCb; /*!< Dl Control Block */
- } u;
- uint8_t dlSduId; /*!< Downlink SDU ID */
- RlcThpt rlcThpt; /*!< Throughput at RLC*/
-}RlcCb;
-
-RlcCb *rlcCb[MAX_RLC_INSTANCES]; /*!< RLC global control block */
-
-/****************************************************************************
- * Declarations
- ***************************************************************************/
-S16 rlcGetSId ARGS((SystemId *s));
-
-Void rlcTmrExpiry ARGS((PTR cb, S16 tmrEvnt));
-
-S16 rlcLmmSendTrc ARGS ((RlcCb *gCb, Event event, Buffer *mBuf));
-
-void rlcStartTmr ARGS((RlcCb *gCb, PTR cb, S16 tmrEvnt));
-
-void rlcStopTmr ARGS((RlcCb *gCb, PTR cb, uint8_t tmrType));
-
-bool rlcChkTmr ARGS((RlcCb *gCb,PTR cb, S16 tmrEvnt));
-
-#ifdef LTE_L2_MEAS
-Void rlcLmmSendAlarm ARGS (( RlcCb *gCb,
- uint16_t category,
- uint16_t event,
- uint16_t cause,
- SuId suId,
- uint32_t ueId,
- uint8_t qci));
-
-S16 RlcMiRlcDlL2MeasReq ARGS (( Pst *pst, RlcL2MeasReqEvt *measReqEvt ));
-S16 RlcMiRlcDlL2MeasSendReq ARGS((Pst *pst,uint8_t measType));
-S16 RlcMiRlcDlL2MeasStopReq ARGS((Pst *pst,uint8_t measType));
-S16 RlcMiRlcUlL2MeasReq ARGS (( Pst *pst, RlcL2MeasReqEvt *measReqEvt ));
-S16 RlcMiRlcUlL2MeasSendReq ARGS((Pst *pst,uint8_t measType));
-S16 RlcMiRlcUlL2MeasStopReq ARGS((Pst *pst,uint8_t measType));
-Void rlcUtlPlcMeasDatInL2Sts ARGS((RlcL2Cntr *measData,
- RlcL2MeasRbCb *rbL2Cb,
- uint8_t measType));
-#else /* LTE_L2_MEAS */
-Void rlcLmmSendAlarm ARGS ((RlcCb *gCb,
- uint16_t category,
- uint16_t event,
- uint16_t cause,
- SuId suId,
- uint32_t ueId));
-#endif /* LTE_L2_MEAS */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __KWX__ */
-
-\f
-/********************************************************************30**
-
- End of file
-**********************************************************************/
+++ /dev/null
-/*******************************************************************************
-################################################################################
-# Copyright (c) [2017-2019] [Radisys] #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-*******************************************************************************/
-
-/********************************************************************20**
-
- Name: NR RLC file for downlink and non real time tasks
-
- Type: C include file
-
- Desc: This file contains helper macros for RLC downlink
- and non real time task
-
- File: kw_dl.h
-
-*********************************************************************21*/
-/** @file kw_dl.h
-@brief RLC Downlink helper macros
-*/
-
-#ifndef __KW_DLH__
-#define __KW_DLH__
-#define RLC_DL_INST 1
-#define RLC_MAX_RNG_DEQ_INDX 8
-
-/* Below are the status used within RLC */
-#define RLC_SDU_OPAT_NOUPDATE 0
-#define RLC_SDU_OPAT_UPD_TX 1
-#define RLC_SDU_OPAT_UPD_RETX 2
-
-/* Below are the status which needs to be updated to MAC */
-#define RLC_RGU_SDU_OPAT_NOUPDATE 0
-#define RLC_RGU_SDU_OPAT_UPDATE 1
-#define RLC_RGU_SDU_OPAT_BREACH 2
-
-/* PDB Values for various QCI bearers : This value is considered
- after taking into account a 20ms delay at the network */
-#define RLC_PDB_VALUE_FOR_QCI1 80
-#define RLC_PDB_VALUE_FOR_QCI2 130
-#define RLC_PDB_VALUE_FOR_QCI3 30
-#define RLC_PDB_VALUE_FOR_QCI4 280
-#define RLC_PDB_VALUE_FOR_QCI5 80
-#define RLC_PDB_VALUE_FOR_QCI6 280
-#define RLC_PDB_VALUE_FOR_QCI7 80
-#define RLC_PDB_VALUE_FOR_QCI8 280
-#define RLC_PDB_VALUE_FOR_QCI9 280
-
-#define RLC_DATA_BITMASK 0x80 /* Data bitmask is used to fill D/C bit for data*/
-/**
- * @def RLC_MEAS_IS_DL_IP_MEAS_ON_FOR_RB
- *
- * This macro is used to check if DL IP throughput measurement is ON
- * or off for the passed rb
- *
- * Returns TRUE (non-zero) if measurement is ON else FALSE (zero)
- *
- * @param[in] _gCb RLC DL Cb
- * @param[in] _rbCb RLC downlink control block
- *
-*/
-#ifdef LTE_L2_MEAS
-#define RLC_MEAS_IS_DL_ANY_MEAS_ON_FOR_RB(_gCb, _rbCb) \
- ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
- (_gCb->u.dlCb->rlcL2Cb.measOn[_rbCb->qci]))
-
-#define RLC_MEAS_IS_DL_IP_MEAS_ON_FOR_RB(_gCb, _rbCb) \
- ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
- (_gCb->u.dlCb->rlcL2Cb.measOn[_rbCb->qci] & LKW_L2MEAS_DL_IP) && \
- (_rbCb->rbL2Cb.measOn & LKW_L2MEAS_DL_IP))
-
-#define RLC_MEAS_IS_DL_DELAY_MEAS_ON_FOR_RB(_gCb, _rbCb) \
- ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
- (_gCb->u.dlCb->rlcL2Cb.measOn[_rbCb->qci] & LKW_L2MEAS_DL_DELAY))
-
-#define RLC_MEAS_IS_DL_UU_LOSS_MEAS_ON_FOR_RB(_gCb, _rbCb) \
- ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
- (_gCb->u.dlCb->rlcL2Cb.measOn[_rbCb->qci] & LKW_L2MEAS_UU_LOSS))
-#define RLC_UPD_PDCP_L2_DLDELAY_STS(_rlcCb, _rlcRbCb, _delay) \
-{ \
- if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
- ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_DL_DELAY)) \
- { \
- (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_DL_DELAY]->dlPjSduDelay.sduDelay += _delay; \
- (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_DL_DELAY]->dlPjSduDelay.numSdus++; \
- } \
-}
-
-#define RLC_UPD_L2_UU_LOSS_PKTS(_rlcCb, _rlcRbCb, _val) \
-{ \
- if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
- ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_UU_LOSS)) \
- { \
- (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_UU_LOSS]->uuLoss.dLoss += _val; \
- } \
-}
-#define RLC_UPD_L2_UU_LOSS_POS_PKTS(_rlcCb,_rlcRbCb,_val) \
-{ \
- if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
- ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_UU_LOSS)) \
- { \
- (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_UU_LOSS]->uuLoss.posPkts += _val; \
- } \
-}
-/* Discard new changes starts */
-#define RLC_UPD_L2_DL_DISC_SDU_STS(_rlcCb,_rlcRbCb) \
-{ \
- if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
- ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_DL_DISC)) \
- { \
- (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_DL_DISC]->dlDisc.discSdus++; \
- } \
-}
-
-#define RLC_UPD_L2_DL_TOT_SDU_STS(_rlcCb,_rlcRbCb) \
-{ \
- if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
- ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_DL_DISC)) \
- { \
- (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_DL_DISC]->dlDisc.totSdus++; \
- } \
-}
-
-#define RLC_UPD_L2_DECR_NONIP_PER_QCI_RB_COUNT(_rlcCb, _rlcRbCb) \
-{ \
- if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
- ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_DL_DISC)) \
- { \
- uint32_t idx1; \
- for (idx1 = 0; idx1 < LKW_MAX_L2MEAS; idx1++) \
- { \
- if(_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.measType & LKW_L2MEAS_DL_DISC) \
- { \
- if(_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci].totDrbsPerQci > 0) \
- { \
- _rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci].totDrbsPerQci--; \
- if (_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci].totDrbsPerQci == 0) \
- { \
- _rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.qci[(_rlcRbCb)->qci] = 0; \
- memset(&_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci], 0, \
- sizeof(_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci])); \
- } \
- } \
- } \
- } \
- } \
-}
-#else
-#define RLC_UPD_PDCP_L2_DLDELAY_STS(_rlcCb, _rlcRbCb, _delay)
-#define RLC_MEAS_IS_DL_IP_MEAS_ON_FOR_RB(_gCb, _rbCb)
-#define RLC_MEAS_IS_DL_DELAY_MEAS_ON_FOR_RB(_gCb, _rbCb)
-#define RLC_UPD_L2_DL_DISC_SDU_STS(_rlcCb,_rlcRbCb)
-#define RLC_UPD_L2_DL_TOT_SDU_STS(_rlcCb, _rlcRbCb)
-#define RLC_UPD_L2_DECR_NONIP_PER_QCI_RB_COUNT(_rlcCb, _rlcRbCb)
-#endif
-
-
-#endif /* __KW_DLH__ */
-\f
-/********************************************************************30**
-
- End of file
-**********************************************************************/
+++ /dev/null
-/*******************************************************************************
-################################################################################
-# Copyright (c) [2017-2019] [Radisys] #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-*******************************************************************************/
-
-/********************************************************************20**
-
- Name: NR RLC Layer - Lower Interface
-
- Type: C file
-
- Desc: C source code for the lower interface of NR RLC
-
- File: kw_ptli.c
-
-*********************************************************************21*/
-
-/** @file kw_ptli.c
-@brief RLC Lower Interface
-*/
-
-\f
-/* header (.h) include files */
-#include "common_def.h"
-#include "lkw.h" /* LKW defines */
-#include "ckw.h" /* CKW defines */
-#include "kwu.h" /* KWU defines */
-#include "rgu.h" /* RGU defines */
-#ifdef KW_PDCP
-#include "cpj.h" /* CPJ defines */
-#include "pju.h" /* PJU defines */
-#include "lpj.h" /* LPJ defines */
-#endif
-#include "kw_err.h"
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-
-/* extern (.x) include files */
-#include "lkw.x" /* LKW */
-#include "ckw.x" /* CKW */
-#include "kwu.x" /* KWU */
-#include "rgu.x" /* RGU */
-#ifdef KW_PDCP
-#include "cpj.x" /* CPJ defines */
-#include "pju.x" /* PJU defines */
-#include "lpj.x" /* LPJ defines */
-#endif
-#include "kw.x"
-#include "ss_rbuf.h"
-#include "ss_rbuf.x"
-
-#ifndef LCKWLIRGU
-#define PTKWRGU
-#endif
-
-#ifndef RG
-#define PTKWRGU
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-
-
-#ifdef RLC_MAC_DAT_REQ_RBUF
-S16 rlcLiRguDatReqRbuf(Pst *Post,SpId spId,Void *datReq);
-#endif
-
-#ifdef RLC_MAC_STA_RSP_RBUF
-S16 rlcLiRguStaRspRbuf(Pst *Post,SpId spId,Void *staRsp);
-#endif
-#if defined(MAC_RLC_HARQ_STA_RBUF) && defined(LTE_L2_MEAS)
-S16 RlcDlHarqStaBatchProc (Void);
-#endif
-
-\f
-/*********************************************************************
- * Primitives for RGU interface
- ********************************************************************/
-
-/* RGU Bind Request primitive */
-
-RguBndReq kwLiRguBndReqMt[] =
-{
-#ifdef LCKWLIRGU
- cmPkRguBndReq, /* 0 - loosely coupled */
-#endif /* LCRGUIRGU */
-#ifdef RG
- RgUiRguBndReq, /* 1 - tightly coupled, MAC */
-#endif /* RG */
-#ifdef LCKWLIRGU
- cmPkRguBndReq, /* 0 - loosely coupled */
-#endif /* LCRGUIRGU */
-};
-
-/* RGU Unbind Request primitive */
-
-RguBndReq kwLiRguUbndReqMt[] =
-{
-#ifdef LCKWLIRGU
- cmPkRguUbndReq, /* 0 - loosely coupled */
-#endif /* LCRGUIRGU */
-#ifdef RG
- RgUiRguUbndReq, /* 1 - tightly coupled, MAC */
-#endif /* RG */
-#ifdef LCKWLIRGU
- cmPkRguUbndReq, /* 0 - loosely coupled */
-#endif /* LCRGUIRGU */
-};
-
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-#ifdef LTE_RLC_R9
-/* RGU L2 Measurement Ul Ip Throughput Measurement Request primitive */
-
-RguL2MUlThrpMeasReq kwLiRguL2MUlThrpMeasReqMt[] =
-{
-#ifdef LCKWLIRGU
- cmPkRguL2MUlThrpMeasReq, /* 0 - loosely coupled */
-#endif /* LCRGUIRGU */
-#ifdef RG
- RgUiRguL2MUlThrpMeasReq, /* 1 - tightly coupled, MAC */
-#endif /* RG */
-};
-#endif /* LTE_RLC_R9 */
-#endif /* LTE_L2_MEAS */
-\f
-/****************************************************************************
- * RGU Interface Mt functions
- ***************************************************************************/
-/**
- *
- * @brief
- *
- * Handler for RGU SAP bind Request.
- *
- * @b Description:
- *
- * This function is used by RLC to request for binding to
- * MAC for accessing MAC services.This function binds MAC's
- * SAP (identified by spId) with the service user's SAP
- * (identified by suId).
- *
- * @param[in] pst Post structure
- * @param[in] suId Service user SAP ID
- * @param[in] spId Service provider ID
- *
- * @return S16
- * -# ROK
- */
-
-S16 RlcLiRguBndReq
-(
-Pst *post, /* post structure */
-SuId suId, /* Service User Id */
-SpId spId /* Service Provider Id */
-)
-{
-
- /* jump to specific primitive depending on configured selector */
- (*kwLiRguBndReqMt[post->selector])(post, suId, spId);
-
- return ROK;
-
-} /* end of RlcLiRguBndReq */
-
-\f
-/**
- *
- * @brief
- *
- * Handler for bind confirmation from MAC.
- *
- * @b Description:
- *
- * This function handles the bind confirmation received
- * from MAC.
- *
- * @param[in] post - Post structure
- * @param[in] suId - Service provider SAP ID
- * @param[in] reason - Reason of confirmation
- *
- * @return S16
- * -# ROK
- */
-
-S16 RlcLiRguUbndReq(Pst *post,SpId spId,Reason reason)
-{
-
- /* jump to specific primitive depending on configured selector */
- (*kwLiRguUbndReqMt[post->selector])(post, spId, reason);
-
- return ROK;
-
-} /* end of RlcLiRguUbndReq */
-
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-#ifdef LTE_RLC_R9
-\f
-/**
- *
- * @brief
- *
- * Handler for sending ulThrpMeasReqInfo from RLC to MAC for UL ip throughput measurement.
- *
- * @b Description:
- *
- * This function sends ulThrpMeasReqInfo from RLC to MAC whenver UL ip throughput
- * measurement is ON for a single or multiple qci in a UE. This is an indication for MAC
- * to start the T2/T1 time stamps for the coresponding LCHs in the UE.
- *
- * @param[in] post Post structure
- * @param[in] spId Service Provider ID
- * @param[in] ulThrpMeasReqInfo Ul ip measurement request info
- *
- * @return S16
- * -# ROK
- * -# RFAILED
- *
- */
-S16 RlcLiRguL2MUlThrpMeasReq(Pst *post,SpId spId,RguL2MUlThrpMeasReqInfo *l2mUlThrpMeasReq)
-{
-
- /* jump to specific primitive depending on configured selector */
- (*kwLiRguL2MUlThrpMeasReqMt[post->selector])(post, spId, l2mUlThrpMeasReq);
-
- return ROK;
-
-} /* end of RlcLiRguL2MUlThrpMeasReq */
-
-#endif /* LTE_RLC_R9 */
-#endif /* LTE_L2_MEAS */
-
-
-#ifdef MAC_RLC_UL_RBUF
-S16 rlcUlBatchProc ARGS ((Void));
-Void rlcUtlFreeUlRBuf ARGS((void));
-
-S16 rlcUlBatchProc(Void)
-{
-/* Read from Ring Buffer and process PDCP packets */
- RguDDatIndInfo *datInd;
- Void *elmIndx = NULLP;
- static Pst rlcUlRbfuPst={1,1,ENTRLC,0,ENTMAC,0,PRIOR0,RTESPEC,EVTRLCULDAT,0,0,0,0};
-/* Read from Ring Buffer and process PDCP packets */
-
-#ifndef SS_RBUF
- RguDedDatInd1 *rguDatInd = NULLP;
- uint8_t rngBufDeqIndx = 0;
-
- elmIndx = SRngGetRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC);
- while(NULLP != elmIndx)
- {
- rguDatInd = (RguDedDatInd1 *)elmIndx;
- datInd = (RguDDatIndInfo*) rguDatInd->msg;
- SsRngInfoTbl[SS_RNG_BUF_ULMAC_TO_ULRLC].nPktProc++;//Number of pkt processed in tti
- if(datInd != NULLP)
- {
- RlcProcDedLcUlData(&rlcUlRbfuPst, 0, datInd);
- }
- else
- {
- DU_LOG("\nERROR --> RLC UL : Received NULL buffer");
- }
- rguDatInd->msg=NULLP;
- SRngIncrRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC);
- elmIndx = NULLP;
- rguDatInd = NULLP;
-
- rngBufDeqIndx++;
-
- //if(rngBufDeqIndx >= SS_RNG_MAX_ULMAC_TO_ULRLC_DQ_CNT)
- // break;
-
- if((elmIndx = SRngGetRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC)) == NULLP)
- break;
- }
-#else
- elmIndx = SRngGetRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC);
- while(NULLP != elmIndx)
- {
- datInd = (RguDDatIndInfo *)elmIndx;
- RlcProcDedLcUlData(&rlcUlRbfuPst, 0, datInd);
-
- elmIndx = NULLP;
- datInd = NULLP;
- SRngIncrRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC);
-
- if((elmIndx = SRngGetRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC)) == NULLP)
- break;
- }
-#endif
- return ROK;
-
-}
-
-/**
- *
- * @brief
- * Handler to clear Ring buffer from UL RLC
- *
- * @details
- * This function clears all the ring buffer content from UL RLC
- *
- * @return S16
- * -# ROK
- * -# RFAILED
- *
- */
-Void rlcUtlFreeUlRBuf(void)
-{
- RguDDatIndInfo *datInd;
- PTR elem;
- uint8_t numLch;
- uint8_t numPdu;
-
- /* Free SS_RNG_BUF_ULMAC_TO_ULRLC */
- while((SDeqSRngBuf (SS_RNG_BUF_ULMAC_TO_ULRLC, &elem) == ROK))
- {
- datInd = (RguDDatIndInfo *)elem;
- for(numLch = 0; numLch< datInd->numLch; numLch++)
- {
- for(numPdu = 0; numPdu < datInd->lchData[numLch].pdu.numPdu; numPdu++)
- {
- if(datInd->lchData[numLch].pdu.mBuf[numPdu])
- {
- ODU_PUT_MSG_BUF(datInd->lchData[numLch].pdu.mBuf[numPdu]);
- }
- }
- }
- RLC_PST_FREE(0, 0, datInd, sizeof(RguDDatIndInfo));
- }
-}
-#endif
-#ifdef RLC_MAC_STA_RSP_RBUF
-S16 rlcLiRguStaRspRbuf(Pst *post,SpId spId,Void *staRsp)
-{
- S16 ret1 = ROK;
-
- Void *elem = NULLP;
-
- RguDStaRspInfo *staRspInfo = NULL;
- elem = SRngGetWIndx(SS_RNG_BUF_DLRLC_TO_DLMAC);
- if (NULLP != elem)
- {
- staRspInfo = (RguDStaRspInfo *)elem;
- memcpy(staRspInfo, staRsp, sizeof(RguDStaRspInfo));
- staRspInfo->post = *post;
- SRngIncrWIndx(SS_RNG_BUF_DLRLC_TO_DLMAC);
- SsRngInfoTbl[SS_RNG_BUF_DLRLC_TO_DLMAC].pktRate++;
- }
- else
- {
- DU_LOG("\nERROR --> RLC_DL : RLC DL STA RSP RBUF is FULL!!! ");
- SsRngInfoTbl[SS_RNG_BUF_DLRLC_TO_DLMAC].pktDrop++;
- ret1 = RFAILED;
- }
- return (ret1);
-} /* cmPkRlcDatReq */
-
-#endif
-#ifdef RLC_MAC_DAT_REQ_RBUF
-S16 rlcLiRguDatReqRbuf(Pst *post,SpId spId,Void *datReq)
-{
- S16 ret1 = ROK;
-
- Void *elem = NULLP;
- RguInfoRingElem *datReqRing=NULLP;
- elem = SRngGetWIndx(SS_RNG_BUF_DLRLC_TO_DLMAC_DAT_REQ);
- if (NULLP != elem)
- {
- datReqRing = (RguInfoRingElem *) elem;
- datReqRing->spId = spId;
- datReqRing->event = post->event;
- datReqRing->msg =datReq;
- SRngIncrWIndx(SS_RNG_BUF_DLRLC_TO_DLMAC_DAT_REQ);
- SsRngInfoTbl[SS_RNG_BUF_DLRLC_TO_DLMAC_DAT_REQ].pktRate++;
- }
- else
- {
- DU_LOG("\nERROR --> RLC_DL : RLC DL DAT REQ RBUF is FULL!!! \n");
- SsRngInfoTbl[SS_RNG_BUF_DLRLC_TO_DLMAC_DAT_REQ].pktDrop++;
- ret1 = RFAILED;
- }
- return (ret1);
-} /* cmPkRlcDatReq */
-
-#endif
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-\f
-/********************************************************************30**
- End of file
-**********************************************************************/
+++ /dev/null
-/*******************************************************************************
-################################################################################
-# Copyright (c) [2017-2019] [Radisys] #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-*******************************************************************************/
-
-/********************************************************************20**
-
- Name: RLC Layer Management interface
-
- Type: C source file
-
- Desc: This file contains source code for RLC layer management
- interface primitives. It includes the definition of the
- following functions and their portable function
- definitions.
- -- PjMiLpjCfgCfm
- -- PjMiLpjCntrlCfm
- -- PjMiLpjStaInd
-
-
- File: kw_ptmi.c
-
-*********************************************************************21*/
-
-\f
-/* header (.h) include files */
-#include "common_def.h"
-#include "lkw.h" /* LKW defines */
-#include "ckw.h" /* CKW defines */
-#include "kwu.h" /* KWU defines */
-#include "rgu.h" /* RGU defines */
-
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-
-/* extern (.x) include files */
-#include "lkw.x" /* LKW */
-#include "ckw.x" /* CKW */
-#include "kwu.x" /* KWU */
-#include "rgu.x" /* RGU */
-
-#include "kw.x"
-
-/* local defines */
-#define MAXKWMI 2 /* max. layer management interfaces */
-
-\f
-/*********************************************************************
- * Primitives for LKW interface
- ********************************************************************/
-/* Configuration confirmation primitive */
-
-static RlcConfigCfm rlcMiRlcConfigCfmMt[MAXKWMI] =
-{
-#ifdef LCKWMILKW
- packRlcConfigCfm, /* 0 - loosely coupled - fc */
-#endif /* LCRLMILKW */
-#ifdef SM
- SmMiRlcConfigCfm, /* 1 - tightly coupled layer management*/
-#endif /* SM */
-};
-
-/* control confirmation primitives */
-
-static LkwCntrlCfm kwMiLkwCntrlCfmMt[MAXKWMI] =
-{
-#ifdef LCKWMILKW
- cmPkLkwCntrlCfm, /* 0 - loosely coupled - fc */
-#endif /* LCRLMILKW */
-#ifdef SM
- SmMiLkwCntrlCfm, /* 1 - tightly coupled layer management*/
-#endif /* SM */
-};
-
-/* Status Indication primitive */
-
-static LkwStaInd kwMiLkwStaIndMt[MAXKWMI] =
-{
-#ifdef LCKWMILKW
- cmPkLkwStaInd, /* 0 - loosely coupled */
-#endif /* LCKWMILKW */
-#ifdef SM
- SmMiLkwStaInd, /* 1 - tightly coupled, layer management */
-#endif /* SM */
-};
-
-/* Status confirm primitive */
-
-static LkwStaCfm kwMiLkwStaCfmMt[MAXKWMI] =
-{
-#ifdef LCKWMILKW
- cmPkLkwStaCfm, /* 0 - loosely coupled */
-#endif /* LCKWMILKW */
-#ifdef SM
- SmMiLkwStaCfm, /* 1 - tightly coupled, layer management */
-#endif /* SM */
-};
-
-/* Statistics confirm primitive */
-
-static LkwStsCfm kwMiLkwStsCfmMt[MAXKWMI] =
-{
-#ifdef LCKWMILKW
- cmPkLkwStsCfm, /* 0 - loosely coupled */
-#endif /* LCRLMILKW */
-#ifdef SM
- SmMiLkwStsCfm, /* 1 - tightly coupled, layer management */
-#endif /* SM */
-};
-
-/* Trace indication primitive */
-
-static LkwTrcInd kwMiLkwTrcIndMt[MAXKWMI] =
-{
-#ifdef LCKWMILKW
- cmPkLkwTrcInd, /* 0 - loosely coupled */
-#endif /* LCKWMILKW */
-#ifdef SM
- SmMiLkwTrcInd, /* 1 - tightly coupled, layer management */
-#endif /* SM */
-};
-
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-static const LkwL2MeasCfm rlcMiLkwL2MeasCfmMt[] =
-{
-#ifdef LCKWMILKW
- cmPkLkwL2MeasCfm,
-#endif
-#ifdef SM
- SmMiLkwL2MeasCfm,
-#endif
-};
-static const LkwL2MeasStopCfm RlcMiLkwL2MeasStopCfmMt[] =
-{
-#ifdef LCKWMILKW
- cmPkLkwL2MeasStopCfm,
-#endif
-#ifdef SM
- SmMiLkwL2MeasStopCfm,
-#endif
-};
-#endif /* LTE_L2_MEAS */
-\f
-/****************************************************************************
- * LKW Interface Mt functions
- ***************************************************************************/
-/**
- @brief
- This function is called by the RlcMiRlcConfigReq function for responding
- to configuration requests.The cfm field in the RlcMngmt structure contains
- the response value.
-
- - This function calls the mapping matrix for sending the configuration
- confirmation.
- - The actual function called depends on the coupling at the LKW interface.
- - For a loosely coupled interface, a common packing function is called.
- - The packing function packs the parameter in a message buffer and posts
- the message to the target task.
- - For a tightly coupled interface, the actual function called depends on
- the layer manager API provided.
-
-*/
-S16 RlcMiRlcConfigCfm
-(
-Pst *pst, /* post structure */
-RlcMngmt *cfm /* Layer Management structure */
-)
-{
-
- /* jump to specific primitive depending on configured selector */
- (*rlcMiRlcConfigCfmMt[pst->selector])(pst, cfm);
-
- return ROK;
-}
-
-
-/**
- @brief
- This function is called by the RlcMiLkwCntrlReq function to send a control confirm to the layer management module.
-
- - This function calls the mapping matrix for sending the control confirmation.
- - Actual function called depends on the coupling of the LKW interface.
- - For a loosely coupled interface, a common packing function is called.
- - The packing function packs the parameter in a message buffer and posts the
- message to the target task.
- - For a tightly coupled interface, the actual function called depends on the
- layer manager API provided.
-
-*/
-S16 RlcMiLkwCntrlCfm
-(
-Pst *pst, /* post structure */
-RlcMngmt *cfm /* configure */
-)
-{
-
- /* jump to specific primitive depending on configured selector */
- (*kwMiLkwCntrlCfmMt[pst->selector])(pst, cfm);
-
- return ROK;
-
-} /* end of RlcMiLkwCntrlCfm */
-
-/**
- @brief
- Description:
- - This function can be used by RLC to send unsolicited status information
- to the layer manager, when the unsolicited status flag is enabled by the
- layer manager through a previous control request.
-
- - This function calls the mapping matrix for sending the unsolicited status
- indication.The actual function called depends on the coupling of the
- LKW interface.
-
- - For a loosely coupled interface, a common packing function is called. The
- packing function packs the parameter in a message buffer and posts the
- message to the target task.
-
- - For a tightly coupled interface, the actual function called depends on
- the layer manager API provided.
-*/
-S16 RlcMiLkwStaInd
-(
-Pst *pst, /* post structure */
-RlcMngmt *usta /* unsolicited status */
-)
-{
- /* jump to specific primitive depending on configured selector */
- (*kwMiLkwStaIndMt[pst->selector])(pst, usta);
-
- return (ROK);
-} /* end of RlcMiLkwStaInd */
-
-
-/**
- @brief
- - This function is called by the RlcMiLkwStaReq function to send
- the requested status information to the layer manager.
-
- - This function calls the mapping matrix for sending the status
- confirmation. The actual function called depends on the coupling
- of the LKW interface.
-
- - For a loosely coupled interface, a common packing function is called.
- The packing function packs the parameter in a message buffer and
- posts the message to the target task.
-
- - For a tightly coupled interface, the actual function called depends
- on the layer manager API provided.
-
-*/
-S16 RlcMiLkwStaCfm
-(
-Pst *pst, /* post structure */
-RlcMngmt *cfm /* solicited status confirmation */
-)
-{
-
- /* jump to specific primitive depending on configured selector */
- (*kwMiLkwStaCfmMt[pst->selector])(pst, cfm);
-
- return ROK;
-
-} /* end of RlcMiLkwStaCfm */
-
-
-/**
- @brief
- - This function is called by the RlcMiLkwStsReq function for responding
- to statistics requests.
-
- - This function calls the mapping matrix for sending the statistics
- confirmation. The actual function called depends on the coupling
- of the LKW interface.
-
- - For a loosely coupled interface, a common packing function is called.
- The packing function packs the parameter in a message buffer and
- posts the message to the target task.
-
- - For a tightly coupled interface, the actual function called depends
- on the layer manager API provided.
-
-*/
-S16 RlcMiLkwStsCfm
-(
-Pst *pst, /* post structure */
-Action action, /* action */
-RlcMngmt *cfm /* statistics confirmation */
-)
-{
- /* jump to specific primitive depending on configured selector */
- (*kwMiLkwStsCfmMt[pst->selector])(pst, action, cfm);
-
- return ROK;
-
-} /* end of RlcMiLkwStsCfm */
-
-/**
- @brief
- - This function can be used by RLC module to send unsolicited trace
- indications to the layer manager, when tracing is enabled by the
- layer manager through a previous control request.
-
- - This function calls the mapping matrix for sending the trace indication.
- The actual function called depends on the coupling of the LKW interface.
-
- - For a loosely coupled interface, a common packing function is called.
- The packing function packs the parameter in a message buffer and posts
- the message to the target task.
-
- - For a tightly coupled interface, the actual function called depends on
- the layer manager API provided.
-
-*/
-S16 RlcMiLkwTrcInd
-(
-Pst *pst, /* post structure */
-RlcMngmt *trc, /* trace indication */
-Buffer *mBuf /* message buffer */
-)
-{
- /* jump to specific primitive depending on configured selector */
- (*kwMiLkwTrcIndMt[pst->selector])(pst, trc, mBuf);
-
- return ROK;
-
-} /* end of RlcMiLkwTrcInd */
-
-
-/* kw005.201 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-S16 RlcMiLkwL2MeasCfm(Pst * pst,RlcL2MeasCfmEvt *measEvt)
-{
-
- (*rlcMiLkwL2MeasCfmMt[pst->selector])(pst, measEvt);
-
- return ROK;
-
-}
-S16 RlcMiLkwL2MeasStopCfm(Pst *pst,uint8_t measType,uint8_t status)
-{
-
- (*RlcMiLkwL2MeasStopCfmMt[pst->selector])(pst, measType,status);
-
- return ROK;
-
-}
-#endif /* LTE_L2_MEAS */
-
-/********************************************************************30**
-
- End of file
-**********************************************************************/
+++ /dev/null
-/*******************************************************************************
-################################################################################
-# Copyright (c) [2017-2019] [Radisys] #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-*******************************************************************************/
-
-/********************************************************************20**
-
- Name: UDX Control Interface
-
- Type: C include file
-
- Desc: This file Contains the Data structures for and prototypes
- UDX Interface
-
- File: kw_udx.h
-
-*********************************************************************21*/
-
-#ifndef __KW_UDX_H__
-#define __KW_UDX_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-
-/** @file kw_udx.h
- @brief UDX Interface File (ckw.h)
-*/
-
-/* UDX Interface Hash Defines */
-
-/* Loose Coupling define */
-#define UDX_SEL_LC 0 /*!< Loose Coupling Option */
-#define UDX_SEL_LWLC 1
-#define RLC_MAX_UDX 3
-
-
-/* CKW Interface defines */
-#define UDX_MAX_ENT_CFG 24 /*!< Maximum number of entities to configure */
-
-#define ERRUDX 0
-#define EUDXXXX 0
-/* ckw_h_001.main_3 added support for L2 Measurement */
-#ifdef LTE_L2_MEAS
-#define UDX_MAX_QCI 10
-#endif
-/* CKW Interface configuration type */
-#define UDX_CFG_ADD 1 /*!< Add RLC Entity */
-#define UDX_CFG_MODIFY 2 /*!< Modify RLC Entity */
-#define UDX_CFG_DELETE 3 /*!< Delete RLC entity */
-#define UDX_CFG_REESTABLISH 4 /*!< Re-establish RLC entity */
-#define UDX_CFG_DELETE_UE 5 /*!< Release RLC entities per UE */
-#define UDX_CFG_DELETE_CELL 6 /*!< Release RLC entities per Cell */
-
-/* CKW RLC entity direction configuration */
-#define UDX_CFG_DIR_UL 1 /*!< Unlink direction */
-#define UDX_CFG_DIR_DL 2 /*!< Downlink direction */
-#define UDX_CFG_DIR_BOTH 3 /*!< Both Downlink and Unlink */
-
-/* CKW Configuration confirmations */
-#define UDX_CFG_CFM_OK 1 /*!< Configuration confirmation success */
-#define UDX_CFG_CFM_NOK 2 /*!< Configuration confirmation failed */
-
-/***********************************************************************
- Defines for CKW Interface Events
- ***********************************************************************/
-#define UDX_EVT_BND_REQ 0x01 /*!< Bind Request */
-#define UDX_EVT_BND_CFM 0x02 /*!< Bind Confirm */
-#define UDX_EVT_UBND_REQ 0x03 /*!< Unbind Request */
-#define UDX_EVT_CFG_REQ 0x04 /*!< Config Request */
-#define UDX_EVT_CFG_CFM 0x05 /*!< Config Confirm */
-#define UDX_EVT_UEIDCHG_REQ 0x06 /*!< UE Id Change Request */
-#define UDX_EVT_UEIDCHG_CFM 0x07 /*!< UE Id Change Confirm */
-#define UDX_EVT_STA_UPD_REQ 0x08
-#define UDX_EVT_STA_UPD_CFM 0x09
-#define UDX_EVT_STA_PDU_REQ 0x0A
-#define UDX_EVT_STA_PHBT_TMR_START 0x0B
-#define UDX_EVT_DL_CLEANUP_MEM 0x10 /*!< To cleanup memory in DL inst */
-
-/***********************************************************************
- Defines for Measurements
- ***********************************************************************/
-#define UDX_EVT_L2MEAS_REQ 0x11
-#define UDX_EVT_L2MEAS_SEND_REQ 0x12
-#define UDX_EVT_L2MEAS_STOP_REQ 0x13
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif
-
-\f
-/********************************************************************30**
- End of file
-**********************************************************************/
+++ /dev/null
-/*******************************************************************************
-################################################################################
-# Copyright (c) [2017-2019] [Radisys] #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-*******************************************************************************/
-
-/********************************************************************20**
-
- Name: NR RLC file for uplink and non real time tasks
-
- Type: C include file
-
- Desc: This file contains helper macros for RLC uplink
- and non real time tasks
-
- File: kw_ul.h
-
-*********************************************************************21*/
-/**
- * @file kw_ul.h
- * @brief RLC uplink helper macros
-*/
-
-#ifndef __KW_ULH__
-#define __KW_ULH__
-
-/**
- * @def RLC_MEAS_IS_UL_IP_MEAS_ON_FOR_RB
- *
- * This macro is used to check if UL IP throughput measurement is ON
- * or off for the passed rb
- *
- * Returns TRUE(non-zero) if measurement is ON else FALSE (zero)
- *
- * @param[in] _gCb RLC UL Cb
- * @param[in] _rbCb RLC uplink control block
- *
-*/
-#define RLC_MEAS_IS_UL_IP_MEAS_ON_FOR_RB(_gCb, _rbCb) \
- ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
- (_gCb->u.ulCb->rlcL2Cb.measOn[_rbCb->qci] & LKW_L2MEAS_UL_IP) && \
- (_rbCb->rbL2Cb.measOn & LKW_L2MEAS_UL_IP))
-#endif /* __KW_ULH__ */
-\f
-/********************************************************************30**
-
- End of file
-**********************************************************************/
Duplicate detection for byte segments
Reassemble SDUs
- File: kw_amm_dl.c
+ File: rlc_amm_dl.c
*********************************************************************21*/
/* header include files (.h) */
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
-
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
-
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
//UDAY
#ifdef L2_OPTMZ
/* private variable declarations */
-#define RLC_AM_RMV_HDR(_gCb, _rbCb, _retx) do { \
+#define RLC_AM_REMOVE_HDR(_gCb, _rbCb, _retx) do { \
if ((_retx)->yetToConst == FALSE) \
{\
Buffer *_pduInfo; \
tNode->lstEnt.prev = 0;
/* Segment header and data */
- RLC_AM_RMV_HDR(gCb, rbCb, retx);
+ RLC_AM_REMOVE_HDR(gCb, rbCb, retx);
/* kw003.201 - Split the payload and update other fields */
rlcSplitPdu(gCb,rbCb, retx, tNode, rlcDatReq->pduSz);
Duplicate detection for byte segments
Reassemble SDUs
- File: kw_amm_ul.c
+ File: rlc_amm_ul.c
*********************************************************************21*/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_udx.h"
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
-
-#include "kw.h" /* RLC defines */
-#include "kw_ul.h"
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_ul.x"
-#include "kw_udx.x"
-
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_ul.h"
/* Variable for logging, declared in cl */
#ifndef RGL_SPECIFIC_CHANGES
#ifndef TENB_ACC
-- rlcCfgReEstRb
-- rlcCfgDelUe
- File: kw_cfg_dl.c
+ File: rlc_cfg_dl.c
*********************************************************************21*/
-/** @file kw_cfg_dl.c
+/** @file rlc_cfg_dl.c
@brief RLC Downlink Configuration Module
**/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* RLC error options */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
+#include "rlc_err.h" /* RLC error options */
+#include "rlc_env.h" /* RLC environment options */
+
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
#include "du_app_rlc_inf.h"
#define RLC_MODULE RLC_DBGMASK_CFG
-- rlcCfgFillRbCb
-- rlcCfgRbInit
- File: kw_cfg_ul.c
+ File: rlc_cfg_ul.c
*********************************************************************21*/
-/** @file kw_cfg_ul.c
+/** @file rlc_cfg_ul.c
@brief RLC Uplink Configuration Module
**/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* RLC error options */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_ul.h"
+#include "rlc_err.h" /* RLC error options */
+#include "rlc_env.h" /* RLC environment options */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_ul.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_ul.h"
#ifdef TENB_STATS
#ifdef L2_L3_SPLIT
#include "l2_tenb_stats.x" /* Total EnodeB Stats declarations */
- kwDbmDelAllCell
- kwDbmShutdown
- File: kw_dbm_dl.c
+ File: rlc_dbm_dl.c
*********************************************************************21*/
#include "ckw.h" /* CKW defines */
#include "rgu.h" /* RGU defines */
#include "kwu.h" /* KWU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
+
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "ckw.x" /* CKW */
#include "rgu.x" /* RGU */
#include "kwu.x" /* KWU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
#ifdef TENB_STATS
TSL2UeStatsCb* TSL2MapUeStatsBlk (uint16_t rnti);
Desc: Source code for Database Module functions such as,
- File: kw_dbm_ul.c
+ File: rlc_dbm_ul.c
*********************************************************************21*/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_ul.h"
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_ul.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_ul.h"
/**
* @file gp_dbm_ul.c
/********************************************************************20**
- Name: NR RLC file
+ Name: NR RLC file for downlink and non real time tasks
- Type: C include file
+ Type: C include file
- Desc: This file contains all the data structures and
- prototypes for RLC.
+ Desc: This file contains helper macros for RLC downlink
+ and non real time task
- File: kw_dl.x
+ File: rlc_dl.h
*********************************************************************21*/
-/**
- * @file kw_dl.x
- * @brief RLC downlink structures, prototypes
+/** @file rlc_dl.h
+@brief RLC Downlink helper macros
*/
-#ifndef __KW_DLX__
-#define __KW_DLX__
-
+#ifndef __RLC_DLH__
+#define __RLC_DLH__
+
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
#include "l2_tenb_stats.x"
#endif
#endif
+
+#define RLC_DL_INST 1
+#define RLC_MAX_RNG_DEQ_INDX 8
+
+/* Below are the status used within RLC */
+#define RLC_SDU_OPAT_NOUPDATE 0
+#define RLC_SDU_OPAT_UPD_TX 1
+#define RLC_SDU_OPAT_UPD_RETX 2
+
+/* Below are the status which needs to be updated to MAC */
+#define RLC_RGU_SDU_OPAT_NOUPDATE 0
+#define RLC_RGU_SDU_OPAT_UPDATE 1
+#define RLC_RGU_SDU_OPAT_BREACH 2
+
+/* PDB Values for various QCI bearers : This value is considered
+ after taking into account a 20ms delay at the network */
+#define RLC_PDB_VALUE_FOR_QCI1 80
+#define RLC_PDB_VALUE_FOR_QCI2 130
+#define RLC_PDB_VALUE_FOR_QCI3 30
+#define RLC_PDB_VALUE_FOR_QCI4 280
+#define RLC_PDB_VALUE_FOR_QCI5 80
+#define RLC_PDB_VALUE_FOR_QCI6 280
+#define RLC_PDB_VALUE_FOR_QCI7 80
+#define RLC_PDB_VALUE_FOR_QCI8 280
+#define RLC_PDB_VALUE_FOR_QCI9 280
+
+#define RLC_DATA_BITMASK 0x80 /* Data bitmask is used to fill D/C bit for data*/
+/**
+ * @def RLC_MEAS_IS_DL_IP_MEAS_ON_FOR_RB
+ *
+ * This macro is used to check if DL IP throughput measurement is ON
+ * or off for the passed rb
+ *
+ * Returns TRUE (non-zero) if measurement is ON else FALSE (zero)
+ *
+ * @param[in] _gCb RLC DL Cb
+ * @param[in] _rbCb RLC downlink control block
+ *
+*/
+#ifdef LTE_L2_MEAS
+#define RLC_MEAS_IS_DL_ANY_MEAS_ON_FOR_RB(_gCb, _rbCb) \
+ ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
+ (_gCb->u.dlCb->rlcL2Cb.measOn[_rbCb->qci]))
+
+#define RLC_MEAS_IS_DL_IP_MEAS_ON_FOR_RB(_gCb, _rbCb) \
+ ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
+ (_gCb->u.dlCb->rlcL2Cb.measOn[_rbCb->qci] & LKW_L2MEAS_DL_IP) && \
+ (_rbCb->rbL2Cb.measOn & LKW_L2MEAS_DL_IP))
+
+#define RLC_MEAS_IS_DL_DELAY_MEAS_ON_FOR_RB(_gCb, _rbCb) \
+ ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
+ (_gCb->u.dlCb->rlcL2Cb.measOn[_rbCb->qci] & LKW_L2MEAS_DL_DELAY))
+
+#define RLC_MEAS_IS_DL_UU_LOSS_MEAS_ON_FOR_RB(_gCb, _rbCb) \
+ ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
+ (_gCb->u.dlCb->rlcL2Cb.measOn[_rbCb->qci] & LKW_L2MEAS_UU_LOSS))
+#define RLC_UPD_PDCP_L2_DLDELAY_STS(_rlcCb, _rlcRbCb, _delay) \
+{ \
+ if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
+ ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_DL_DELAY)) \
+ { \
+ (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_DL_DELAY]->dlPjSduDelay.sduDelay += _delay; \
+ (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_DL_DELAY]->dlPjSduDelay.numSdus++; \
+ } \
+}
+
+#define RLC_UPD_L2_UU_LOSS_PKTS(_rlcCb, _rlcRbCb, _val) \
+{ \
+ if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
+ ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_UU_LOSS)) \
+ { \
+ (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_UU_LOSS]->uuLoss.dLoss += _val; \
+ } \
+}
+#define RLC_UPD_L2_UU_LOSS_POS_PKTS(_rlcCb,_rlcRbCb,_val) \
+{ \
+ if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
+ ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_UU_LOSS)) \
+ { \
+ (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_UU_LOSS]->uuLoss.posPkts += _val; \
+ } \
+}
+/* Discard new changes starts */
+#define RLC_UPD_L2_DL_DISC_SDU_STS(_rlcCb,_rlcRbCb) \
+{ \
+ if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
+ ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_DL_DISC)) \
+ { \
+ (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_DL_DISC]->dlDisc.discSdus++; \
+ } \
+}
+
+#define RLC_UPD_L2_DL_TOT_SDU_STS(_rlcCb,_rlcRbCb) \
+{ \
+ if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
+ ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_DL_DISC)) \
+ { \
+ (_rlcRbCb)->rbL2Cb.l2Sts[RLC_L2MEAS_DL_DISC]->dlDisc.totSdus++; \
+ } \
+}
+
+#define RLC_UPD_L2_DECR_NONIP_PER_QCI_RB_COUNT(_rlcCb, _rlcRbCb) \
+{ \
+ if(((_rlcRbCb)->rlcId.rbType == CM_LTE_DRB) && \
+ ((_rlcCb)->u.dlCb->rlcL2Cb.measOn[_rlcRbCb->qci] & LKW_L2MEAS_DL_DISC)) \
+ { \
+ uint32_t idx1; \
+ for (idx1 = 0; idx1 < LKW_MAX_L2MEAS; idx1++) \
+ { \
+ if(_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.measType & LKW_L2MEAS_DL_DISC) \
+ { \
+ if(_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci].totDrbsPerQci > 0) \
+ { \
+ _rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci].totDrbsPerQci--; \
+ if (_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci].totDrbsPerQci == 0) \
+ { \
+ _rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.qci[(_rlcRbCb)->qci] = 0; \
+ memset(&_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci], 0, \
+ sizeof(_rlcCb->u.dlCb->rlcL2Cb.rlcL2EvtCb[idx1].measCb.val.nonIpThMeas.measData[(_rlcRbCb)->qci])); \
+ } \
+ } \
+ } \
+ } \
+ } \
+}
+#else
+#define RLC_UPD_PDCP_L2_DLDELAY_STS(_rlcCb, _rlcRbCb, _delay)
+#define RLC_MEAS_IS_DL_IP_MEAS_ON_FOR_RB(_gCb, _rbCb)
+#define RLC_MEAS_IS_DL_DELAY_MEAS_ON_FOR_RB(_gCb, _rbCb)
+#define RLC_UPD_L2_DL_DISC_SDU_STS(_rlcCb,_rlcRbCb)
+#define RLC_UPD_L2_DL_TOT_SDU_STS(_rlcCb, _rlcRbCb)
+#define RLC_UPD_L2_DECR_NONIP_PER_QCI_RB_COUNT(_rlcCb, _rlcRbCb)
+#endif
+
+
typedef struct rlcDlUeCb RlcDlUeCb;
/**
}
#endif /* __cplusplus */
-#endif /* __KW_DLX__ */
-
+#endif /* __RLC_DLH__ */
\f
/********************************************************************30**
Desc: C source code for the interface to System Services
of NR RLC
- File: kw_dl_ex_ms.c
+ File: rlc_dl_msg_router.c
*********************************************************************21*/
-/** @filekw_dl_ex_ms.c
+/** @filerlc_dl_msg_router.c
@brief RLC System Services Interface
*/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
+
/* extern (.x) include files */
#include "ckw.x" /* CKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
+
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
#include "du_app_rlc_inf.h"
#include "rlc_mac_inf.h"
Desc: This file Contains the packing and unpacking functions for
UDX Interface
- File: kw_udx.c
+ File: rlc_dl_ul_inf.c
*********************************************************************21*/
#include "common_def.h"
-#include "lkw.h"
-#include "kw_udx.h" /* UDX defines */
-#include "kw.h"
+#include "rgu.h" /* RGU interface includes*/
+#include "lkw.h" /* LKW defines */
+#include "ckw.h" /* CKW defines */
/* extern (.x) include files */
-#include "lkw.x"
-#include "kw_udx.x"
-\f
+#include "rgu.x"
+#include "lkw.x" /* LKW */
+#include "ckw.x" /* CKW */
+
+#include "rlc_env.h"
+#include "rlc_utils.h"
+#include "rlc_dl_ul_inf.h" /* UDX defines */
#ifdef LCUDX
*
* Notes: None
*
-* File: kw_udx.c
+* File: rlc_dl_ul_inf.c
*
*/
S16 cmUnpkUdxStaProhTmrStart(UdxStaProhTmrStart func,Pst *pst,Buffer *mBuf)
*******************************************************************************/
/**********************************************************************
+
+ Name: UDX Control Interface
+
+ Type: C include file
+
+ Desc: This file Contains the Data structures for and prototypes
+ UDX Interface
- Name: NR RLC layer
-
- Type: C include file
-
- Desc: Defines required by LTE MAC
-
- File: kw_udx.x
-
-
+ File: rlc_dl_ul_inf.h
+
**********************************************************************/
-/** @file kw_udx.x
-@brief This file contains basic data structures for the Uplink Downlink
-interface.
-*/
-
-#ifndef __UDX_X__
-#define __UDX_X__
-#include "ckw.h"
-#include "ckw.x"
+#ifndef __RLC_DL_UL_INF_H__
+#define __RLC_DL_UL_INF_H__
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
+
+/** @file rlc_dl_ul_inf.h
+ @brief UDX Interface File (ckw.h)
+*/
+
+/* UDX Interface Hash Defines */
+
+/* Loose Coupling define */
+#define UDX_SEL_LC 0 /*!< Loose Coupling Option */
+#define UDX_SEL_LWLC 1
+#define RLC_MAX_UDX 3
+
+
+/* CKW Interface defines */
+#define UDX_MAX_ENT_CFG 24 /*!< Maximum number of entities to configure */
+
+#define ERRUDX 0
+#define EUDXXXX 0
+/* ckw_h_001.main_3 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+#define UDX_MAX_QCI 10
+#endif
+/* CKW Interface configuration type */
+#define UDX_CFG_ADD 1 /*!< Add RLC Entity */
+#define UDX_CFG_MODIFY 2 /*!< Modify RLC Entity */
+#define UDX_CFG_DELETE 3 /*!< Delete RLC entity */
+#define UDX_CFG_REESTABLISH 4 /*!< Re-establish RLC entity */
+#define UDX_CFG_DELETE_UE 5 /*!< Release RLC entities per UE */
+#define UDX_CFG_DELETE_CELL 6 /*!< Release RLC entities per Cell */
+
+/* CKW RLC entity direction configuration */
+#define UDX_CFG_DIR_UL 1 /*!< Unlink direction */
+#define UDX_CFG_DIR_DL 2 /*!< Downlink direction */
+#define UDX_CFG_DIR_BOTH 3 /*!< Both Downlink and Unlink */
+
+/* CKW Configuration confirmations */
+#define UDX_CFG_CFM_OK 1 /*!< Configuration confirmation success */
+#define UDX_CFG_CFM_NOK 2 /*!< Configuration confirmation failed */
+
+/***********************************************************************
+ Defines for CKW Interface Events
+ ***********************************************************************/
+#define UDX_EVT_BND_REQ 0x01 /*!< Bind Request */
+#define UDX_EVT_BND_CFM 0x02 /*!< Bind Confirm */
+#define UDX_EVT_UBND_REQ 0x03 /*!< Unbind Request */
+#define UDX_EVT_CFG_REQ 0x04 /*!< Config Request */
+#define UDX_EVT_CFG_CFM 0x05 /*!< Config Confirm */
+#define UDX_EVT_UEIDCHG_REQ 0x06 /*!< UE Id Change Request */
+#define UDX_EVT_UEIDCHG_CFM 0x07 /*!< UE Id Change Confirm */
+#define UDX_EVT_STA_UPD_REQ 0x08
+#define UDX_EVT_STA_UPD_CFM 0x09
+#define UDX_EVT_STA_PDU_REQ 0x0A
+#define UDX_EVT_STA_PHBT_TMR_START 0x0B
+#define UDX_EVT_DL_CLEANUP_MEM 0x10 /*!< To cleanup memory in DL inst */
+
+/***********************************************************************
+ Defines for Measurements
+ ***********************************************************************/
+#define UDX_EVT_L2MEAS_REQ 0x11
+#define UDX_EVT_L2MEAS_SEND_REQ 0x12
+#define UDX_EVT_L2MEAS_STOP_REQ 0x13
+
typedef struct rlcNackInfo
{
uint8_t nackRange;
#endif
+
+
+
#ifdef __cplusplus
}
#endif /* __cplusplus */
-#endif /* __UDX_X__ */
+#endif
-/**********************************************************************
+\f
+/********************************************************************30**
End of file
**********************************************************************/
Desc: Defines required by LTE MAC
- File: kw_udx_dl.c
+ File: rlc_dl_ul_inf_dl.c
**********************************************************************/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
#define RLC_MODULE RLC_DBGMASK_UDX
/* local defines */
Desc: C source code for INF Interface Module
- File: kw_udx_ptdl.c
+ File: rlc_dl_ul_inf_ptdl.c
**********************************************************************/
-/** @file kw_udx_ptdl.c
+/** @file rlc_dl_ul_inf_ptdl.c
*/
/* header include files (.h) */
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
-
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
-
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
#define UDX_MAX_SEL 3
Desc: C source code for INF Interface Module
- File: kw_udx_ptul.c
+ File: rlc_dl_ul_inf_ptul.c
**********************************************************************/
-/** @file kw_udx_ptul.c
+/** @file rlc_dl_ul_inf_ptul.c
*/
/* header include files (.h) */
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
-
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
#ifndef LCKWULUDX
static S16 PtUlUdxBndReq ARGS((Pst* pst, SuId suId,SpId spId ));
Desc: Defines required by LTE MAC
- File: kw_udx_ul.c
+ File: rlc_dl_ul_inf_ul.c
**********************************************************************/
-/** @file kw_udx_ul.c
+/** @file rlc_dl_ul_inf_ul.c
@brief UDX Uplink Module
*/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
-
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_ul.h"
-#include "kw_dl.h"
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-#include "kw_ul.x"
-
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
+#include "rlc_ul.h"
#include "du_app_rlc_inf.h"
#include "rlc_mgr.h"
-#include "rlc_utils.h"
#define RLC_MODULE RLC_DBGMASK_UDX
/* local defines */
to reflect the software architecture needed to run under the
target system hardware architecture.
- File: kw_env.h
+ File: rlc_env.h
*********************************************************************21*/
-/** @file kw_env.h
+/** @file rlc_env.h
@brief RLC Hash definitions
*/
-#ifndef __KWENVH__
-#define __KWENVH__
+#ifndef __RLC_ENV_H__
+#define __RLC_ENV_H__
#define MAX_RLC_INSTANCES 2
#define RLC_MAX_LI KWU_MAX_STA_IND_SDU
#endif
-#endif /* __KWENVH__ */
+#endif /* __RLC_ENV_H__ */
\f
/********************************************************************30**
Desc: This file contain the hash definations for RLC
- File: kw_err.h
+ File: rlc_err.h
*********************************************************************21*/
-/** @file kw_err.h
+/** @file rlc_err.h
@brief RLC Hash definitions
*/
-#ifndef __KW_ERR_H__
-#define __KW_ERR_H__
+#ifndef __RLC_ERR_H__
+#define __RLC_ERR_H__
#if (ERRCLASS & ERRCLS_INT_PAR)
#define RLCLOGERROR(cb,errCls, errCode, errVal, errDesc) \
#define EKW227 (ERRKW + 227) /* gp_pj_tmr.c: 576 */
-#endif /* __KW_ERR_H__ */
+#endif /* __RLC_ERR_H__ */
\f
/********************************************************************30**
################################################################################
*******************************************************************************/
-/********************************************************************20**
+/************************************************************************
Name: NR RLC - Layer Manager file
File: kw_lmm.c
-*********************************************************************21*/
-/** @file kw_lmm.c
+************************************************************************/
+/** @file rlc_layer_mgr.c
@brief RLC Layer Manager Module
**/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_dl.h"
-#include "kw_ul.h"
-#include "kw_udx.h"
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-#include "kw_ul.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
+#include "rlc_ul.h"
#define RLC_MODULE RLC_DBGMASK_LMM
**********************************************************************/
/**
- * @file kw_lim.c
+ * @file rlc_lwr_inf_mgr.c
* @brief RLC Lower Interface module
*/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h"
-#include "kw_env.h" /* RLC environment options */
+#include "rlc_err.h"
+#include "rlc_env.h" /* RLC environment options */
+
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
-#include "kw_ul.h"
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-#include "kw_ul.x"
-#include "rlc_utils.h"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
+#include "rlc_ul.h"
#include "rlc_mac_inf.h"
#ifdef __cplusplus
#include "lkw.h" /* LKW defines */
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
+#include "rlc_env.h" /* RLC environment options */
+#include "rlc_err.h"
/* header/extern include files (.x) */
#include "lkw.x" /* LKW */
#include "ckw.x" /* CKW */
#include "kwu.x" /* KWU */
-#include "kw_err.h"
-#include "kw.x"
+#include "rlc_utils.h" /* RLC defines */
#include "du_app_rlc_inf.h"
#include "rlc_mgr.h"
#include "lkw.h" /* LKW defines */
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_ul.h"
-#include "kw_dl.h"
+#include "rlc_env.h" /* RLC environment options */
+#include "rlc_err.h"
+
/* header/extern include files (.x) */
#include "rgu.x"
#include "lkw.x" /* LKW */
#include "ckw.x" /* CKW */
#include "kwu.x" /* KWU */
-#include "kw_err.h"
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-#include "kw_ul.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
+#include "rlc_ul.h"
#include "rlc_mac_inf.h"
#include "du_app_rlc_inf.h"
-#include "rlc_utils.h"
#include "rlc_upr_inf_api.h"
/*******************************************************************
/********************************************************************20**
- Name: NR RLC Layer - Upper Interface
+ Name: NR RLC Layer - Lower Interface
Type: C file
- Desc: C source code for the upper interface of NR RLC
+ Desc: C source code for the lower interface of NR RLC
- File: kw_ptui.c
+ File: kw_ptli.c
*********************************************************************21*/
-/** @file kw_ptui.c
-@brief RLC Upper Interface
+/** @file rlc_portable_functions.c
+@brief RLC Lower Interface
*/
\f
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-
-#include "kw_err.h"
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
+#ifdef KW_PDCP
+#include "cpj.h" /* CPJ defines */
+#include "pju.h" /* PJU defines */
+#include "lpj.h" /* LPJ defines */
+#endif
+#include "rlc_err.h"
+#include "rlc_env.h" /* RLC environment options */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "ckw.x" /* CKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
+#ifdef KW_PDCP
+#include "cpj.x" /* CPJ defines */
+#include "pju.x" /* PJU defines */
+#include "lpj.x" /* LPJ defines */
+#endif
+
+#include "rlc_utils.h" /* RLC defines */
+/*
#if defined(MAC_RLC_UL_RBUF) || (defined(L2_L3_SPLIT) && defined(ICC_RECV_TSK_RBUF)) || defined(SS_RBUF)
#include "ss_rbuf.h"
#include "ss_rbuf.x"
#endif
-#include "kw.x"
+*/
+#include "ss_rbuf.h"
+#include "ss_rbuf.x"
#if defined(L2_L3_SPLIT) && defined(ICC_RECV_TSK_RBUF)
#include "mt_plat_t33.h"
#include "mt_plat_t33.x"
#endif
+#ifndef LCKWLIRGU
+#define PTKWRGU
+#endif
+
+#ifndef RG
+#define PTKWRGU
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
-\f
+/* local defines */
+#define MAXKWMI 2 /* max. layer management interfaces */
+
+#ifdef RLC_MAC_DAT_REQ_RBUF
+S16 rlcLiRguDatReqRbuf(Pst *Post,SpId spId,Void *datReq);
+#endif
+
+#ifdef RLC_MAC_STA_RSP_RBUF
+S16 rlcLiRguStaRspRbuf(Pst *Post,SpId spId,Void *staRsp);
+#endif
+#if defined(MAC_RLC_HARQ_STA_RBUF) && defined(LTE_L2_MEAS)
+S16 RlcDlHarqStaBatchProc (Void);
+#endif
+
+\f
+/*********************************************************************
+ * Primitives for RGU interface
+ ********************************************************************/
+
+/* RGU Bind Request primitive */
+
+RguBndReq kwLiRguBndReqMt[] =
+{
+#ifdef LCKWLIRGU
+ cmPkRguBndReq, /* 0 - loosely coupled */
+#endif /* LCRGUIRGU */
+#ifdef RG
+ RgUiRguBndReq, /* 1 - tightly coupled, MAC */
+#endif /* RG */
+#ifdef LCKWLIRGU
+ cmPkRguBndReq, /* 0 - loosely coupled */
+#endif /* LCRGUIRGU */
+};
+
+/* RGU Unbind Request primitive */
+
+RguBndReq kwLiRguUbndReqMt[] =
+{
+#ifdef LCKWLIRGU
+ cmPkRguUbndReq, /* 0 - loosely coupled */
+#endif /* LCRGUIRGU */
+#ifdef RG
+ RgUiRguUbndReq, /* 1 - tightly coupled, MAC */
+#endif /* RG */
+#ifdef LCKWLIRGU
+ cmPkRguUbndReq, /* 0 - loosely coupled */
+#endif /* LCRGUIRGU */
+};
+
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+#ifdef LTE_RLC_R9
+/* RGU L2 Measurement Ul Ip Throughput Measurement Request primitive */
+
+RguL2MUlThrpMeasReq kwLiRguL2MUlThrpMeasReqMt[] =
+{
+#ifdef LCKWLIRGU
+ cmPkRguL2MUlThrpMeasReq, /* 0 - loosely coupled */
+#endif /* LCRGUIRGU */
+#ifdef RG
+ RgUiRguL2MUlThrpMeasReq, /* 1 - tightly coupled, MAC */
+#endif /* RG */
+};
+#endif /* LTE_RLC_R9 */
+#endif /* LTE_L2_MEAS */
+
+/*********************************************************************
+ * Primitives for LKW interface
+ ********************************************************************/
+/* Configuration confirmation primitive */
+
+static RlcConfigCfm rlcMiRlcConfigCfmMt[MAXKWMI] =
+{
+#ifdef LCKWMILKW
+ packRlcConfigCfm, /* 0 - loosely coupled - fc */
+#endif /* LCRLMILKW */
+#ifdef SM
+ SmMiRlcConfigCfm, /* 1 - tightly coupled layer management*/
+#endif /* SM */
+};
+
+/* control confirmation primitives */
+
+static LkwCntrlCfm kwMiLkwCntrlCfmMt[MAXKWMI] =
+{
+#ifdef LCKWMILKW
+ cmPkLkwCntrlCfm, /* 0 - loosely coupled - fc */
+#endif /* LCRLMILKW */
+#ifdef SM
+ SmMiLkwCntrlCfm, /* 1 - tightly coupled layer management*/
+#endif /* SM */
+};
+
+/* Status Indication primitive */
+
+static LkwStaInd kwMiLkwStaIndMt[MAXKWMI] =
+{
+#ifdef LCKWMILKW
+ cmPkLkwStaInd, /* 0 - loosely coupled */
+#endif /* LCKWMILKW */
+#ifdef SM
+ SmMiLkwStaInd, /* 1 - tightly coupled, layer management */
+#endif /* SM */
+};
+
+/* Status confirm primitive */
+
+static LkwStaCfm kwMiLkwStaCfmMt[MAXKWMI] =
+{
+#ifdef LCKWMILKW
+ cmPkLkwStaCfm, /* 0 - loosely coupled */
+#endif /* LCKWMILKW */
+#ifdef SM
+ SmMiLkwStaCfm, /* 1 - tightly coupled, layer management */
+#endif /* SM */
+};
+
+/* Statistics confirm primitive */
+
+static LkwStsCfm kwMiLkwStsCfmMt[MAXKWMI] =
+{
+#ifdef LCKWMILKW
+ cmPkLkwStsCfm, /* 0 - loosely coupled */
+#endif /* LCRLMILKW */
+#ifdef SM
+ SmMiLkwStsCfm, /* 1 - tightly coupled, layer management */
+#endif /* SM */
+};
+
+/* Trace indication primitive */
+
+static LkwTrcInd kwMiLkwTrcIndMt[MAXKWMI] =
+{
+#ifdef LCKWMILKW
+ cmPkLkwTrcInd, /* 0 - loosely coupled */
+#endif /* LCKWMILKW */
+#ifdef SM
+ SmMiLkwTrcInd, /* 1 - tightly coupled, layer management */
+#endif /* SM */
+};
+
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+static const LkwL2MeasCfm rlcMiLkwL2MeasCfmMt[] =
+{
+#ifdef LCKWMILKW
+ cmPkLkwL2MeasCfm,
+#endif
+#ifdef SM
+ SmMiLkwL2MeasCfm,
+#endif
+};
+static const LkwL2MeasStopCfm RlcMiLkwL2MeasStopCfmMt[] =
+{
+#ifdef LCKWMILKW
+ cmPkLkwL2MeasStopCfm,
+#endif
+#ifdef SM
+ SmMiLkwL2MeasStopCfm,
+#endif
+};
+#endif /* LTE_L2_MEAS */
+
/*********************************************************************
* Forward Declartion for KWU Porting Functions
********************************************************************/
/* KWU AM Data confirm primitive */
#endif /* KW_PDCP */
+\f
+/****************************************************************************
+ * LKW Interface Mt functions
+ ***************************************************************************/
+/**
+ @brief
+ This function is called by the RlcMiRlcConfigReq function for responding
+ to configuration requests.The cfm field in the RlcMngmt structure contains
+ the response value.
+
+ - This function calls the mapping matrix for sending the configuration
+ confirmation.
+ - The actual function called depends on the coupling at the LKW interface.
+ - For a loosely coupled interface, a common packing function is called.
+ - The packing function packs the parameter in a message buffer and posts
+ the message to the target task.
+ - For a tightly coupled interface, the actual function called depends on
+ the layer manager API provided.
+
+*/
+S16 RlcMiRlcConfigCfm
+(
+Pst *pst, /* post structure */
+RlcMngmt *cfm /* Layer Management structure */
+)
+{
+
+ /* jump to specific primitive depending on configured selector */
+ (*rlcMiRlcConfigCfmMt[pst->selector])(pst, cfm);
+
+ return ROK;
+}
+
+
+/**
+ @brief
+ This function is called by the RlcMiLkwCntrlReq function to send a control confirm to the layer management module.
+
+ - This function calls the mapping matrix for sending the control confirmation.
+ - Actual function called depends on the coupling of the LKW interface.
+ - For a loosely coupled interface, a common packing function is called.
+ - The packing function packs the parameter in a message buffer and posts the
+ message to the target task.
+ - For a tightly coupled interface, the actual function called depends on the
+ layer manager API provided.
+
+*/
+S16 RlcMiLkwCntrlCfm
+(
+Pst *pst, /* post structure */
+RlcMngmt *cfm /* configure */
+)
+{
+
+ /* jump to specific primitive depending on configured selector */
+ (*kwMiLkwCntrlCfmMt[pst->selector])(pst, cfm);
+
+ return ROK;
+
+} /* end of RlcMiLkwCntrlCfm */
+
+/**
+ @brief
+ Description:
+ - This function can be used by RLC to send unsolicited status information
+ to the layer manager, when the unsolicited status flag is enabled by the
+ layer manager through a previous control request.
+
+ - This function calls the mapping matrix for sending the unsolicited status
+ indication.The actual function called depends on the coupling of the
+ LKW interface.
+
+ - For a loosely coupled interface, a common packing function is called. The
+ packing function packs the parameter in a message buffer and posts the
+ message to the target task.
+
+ - For a tightly coupled interface, the actual function called depends on
+ the layer manager API provided.
+*/
+S16 RlcMiLkwStaInd
+(
+Pst *pst, /* post structure */
+RlcMngmt *usta /* unsolicited status */
+)
+{
+ /* jump to specific primitive depending on configured selector */
+ (*kwMiLkwStaIndMt[pst->selector])(pst, usta);
+
+ return (ROK);
+} /* end of RlcMiLkwStaInd */
+
+
+/**
+ @brief
+ - This function is called by the RlcMiLkwStaReq function to send
+ the requested status information to the layer manager.
+
+ - This function calls the mapping matrix for sending the status
+ confirmation. The actual function called depends on the coupling
+ of the LKW interface.
+
+ - For a loosely coupled interface, a common packing function is called.
+ The packing function packs the parameter in a message buffer and
+ posts the message to the target task.
+
+ - For a tightly coupled interface, the actual function called depends
+ on the layer manager API provided.
+
+*/
+S16 RlcMiLkwStaCfm
+(
+Pst *pst, /* post structure */
+RlcMngmt *cfm /* solicited status confirmation */
+)
+{
+
+ /* jump to specific primitive depending on configured selector */
+ (*kwMiLkwStaCfmMt[pst->selector])(pst, cfm);
+
+ return ROK;
+
+} /* end of RlcMiLkwStaCfm */
+
+
+/**
+ @brief
+ - This function is called by the RlcMiLkwStsReq function for responding
+ to statistics requests.
+
+ - This function calls the mapping matrix for sending the statistics
+ confirmation. The actual function called depends on the coupling
+ of the LKW interface.
+
+ - For a loosely coupled interface, a common packing function is called.
+ The packing function packs the parameter in a message buffer and
+ posts the message to the target task.
+
+ - For a tightly coupled interface, the actual function called depends
+ on the layer manager API provided.
+
+*/
+S16 RlcMiLkwStsCfm
+(
+Pst *pst, /* post structure */
+Action action, /* action */
+RlcMngmt *cfm /* statistics confirmation */
+)
+{
+ /* jump to specific primitive depending on configured selector */
+ (*kwMiLkwStsCfmMt[pst->selector])(pst, action, cfm);
+
+ return ROK;
+
+} /* end of RlcMiLkwStsCfm */
+
+/**
+ @brief
+ - This function can be used by RLC module to send unsolicited trace
+ indications to the layer manager, when tracing is enabled by the
+ layer manager through a previous control request.
+
+ - This function calls the mapping matrix for sending the trace indication.
+ The actual function called depends on the coupling of the LKW interface.
+
+ - For a loosely coupled interface, a common packing function is called.
+ The packing function packs the parameter in a message buffer and posts
+ the message to the target task.
+
+ - For a tightly coupled interface, the actual function called depends on
+ the layer manager API provided.
+
+*/
+S16 RlcMiLkwTrcInd
+(
+Pst *pst, /* post structure */
+RlcMngmt *trc, /* trace indication */
+Buffer *mBuf /* message buffer */
+)
+{
+ /* jump to specific primitive depending on configured selector */
+ (*kwMiLkwTrcIndMt[pst->selector])(pst, trc, mBuf);
+
+ return ROK;
+
+} /* end of RlcMiLkwTrcInd */
+
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+S16 RlcMiLkwL2MeasCfm(Pst * pst,RlcL2MeasCfmEvt *measEvt)
+{
+
+ (*rlcMiLkwL2MeasCfmMt[pst->selector])(pst, measEvt);
+
+ return ROK;
+
+}
+S16 RlcMiLkwL2MeasStopCfm(Pst *pst,uint8_t measType,uint8_t status)
+{
+
+ (*RlcMiLkwL2MeasStopCfmMt[pst->selector])(pst, measType,status);
+
+ return ROK;
+
+}
+#endif /* LTE_L2_MEAS */
+
+\f
+/****************************************************************************
+ * RGU Interface Mt functions
+ ***************************************************************************/
+/**
+ *
+ * @brief
+ *
+ * Handler for RGU SAP bind Request.
+ *
+ * @b Description:
+ *
+ * This function is used by RLC to request for binding to
+ * MAC for accessing MAC services.This function binds MAC's
+ * SAP (identified by spId) with the service user's SAP
+ * (identified by suId).
+ *
+ * @param[in] pst Post structure
+ * @param[in] suId Service user SAP ID
+ * @param[in] spId Service provider ID
+ *
+ * @return S16
+ * -# ROK
+ */
+
+S16 RlcLiRguBndReq
+(
+Pst *post, /* post structure */
+SuId suId, /* Service User Id */
+SpId spId /* Service Provider Id */
+)
+{
+
+ /* jump to specific primitive depending on configured selector */
+ (*kwLiRguBndReqMt[post->selector])(post, suId, spId);
+
+ return ROK;
+
+} /* end of RlcLiRguBndReq */
+
+\f
+/**
+ *
+ * @brief
+ *
+ * Handler for bind confirmation from MAC.
+ *
+ * @b Description:
+ *
+ * This function handles the bind confirmation received
+ * from MAC.
+ *
+ * @param[in] post - Post structure
+ * @param[in] suId - Service provider SAP ID
+ * @param[in] reason - Reason of confirmation
+ *
+ * @return S16
+ * -# ROK
+ */
+
+S16 RlcLiRguUbndReq(Pst *post,SpId spId,Reason reason)
+{
+
+ /* jump to specific primitive depending on configured selector */
+ (*kwLiRguUbndReqMt[post->selector])(post, spId, reason);
+
+ return ROK;
+
+} /* end of RlcLiRguUbndReq */
+
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+#ifdef LTE_RLC_R9
\f
+/**
+ *
+ * @brief
+ *
+ * Handler for sending ulThrpMeasReqInfo from RLC to MAC for UL ip throughput measurement.
+ *
+ * @b Description:
+ *
+ * This function sends ulThrpMeasReqInfo from RLC to MAC whenver UL ip throughput
+ * measurement is ON for a single or multiple qci in a UE. This is an indication for MAC
+ * to start the T2/T1 time stamps for the coresponding LCHs in the UE.
+ *
+ * @param[in] post Post structure
+ * @param[in] spId Service Provider ID
+ * @param[in] ulThrpMeasReqInfo Ul ip measurement request info
+ *
+ * @return S16
+ * -# ROK
+ * -# RFAILED
+ *
+ */
+S16 RlcLiRguL2MUlThrpMeasReq(Pst *post,SpId spId,RguL2MUlThrpMeasReqInfo *l2mUlThrpMeasReq)
+{
+
+ /* jump to specific primitive depending on configured selector */
+ (*kwLiRguL2MUlThrpMeasReqMt[post->selector])(post, spId, l2mUlThrpMeasReq);
+
+ return ROK;
+
+} /* end of RlcLiRguL2MUlThrpMeasReq */
+
+#endif /* LTE_RLC_R9 */
+#endif /* LTE_L2_MEAS */
+
+
+#ifdef MAC_RLC_UL_RBUF
+S16 rlcUlBatchProc ARGS ((Void));
+Void rlcUtlFreeUlRBuf ARGS((void));
+
+S16 rlcUlBatchProc(Void)
+{
+/* Read from Ring Buffer and process PDCP packets */
+ RguDDatIndInfo *datInd;
+ Void *elmIndx = NULLP;
+ static Pst rlcUlRbfuPst={1,1,ENTRLC,0,ENTMAC,0,PRIOR0,RTESPEC,EVTRLCULDAT,0,0,0,0};
+/* Read from Ring Buffer and process PDCP packets */
+
+#ifndef SS_RBUF
+ RguDedDatInd1 *rguDatInd = NULLP;
+ uint8_t rngBufDeqIndx = 0;
+
+ elmIndx = SRngGetRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC);
+ while(NULLP != elmIndx)
+ {
+ rguDatInd = (RguDedDatInd1 *)elmIndx;
+ datInd = (RguDDatIndInfo*) rguDatInd->msg;
+ SsRngInfoTbl[SS_RNG_BUF_ULMAC_TO_ULRLC].nPktProc++;//Number of pkt processed in tti
+ if(datInd != NULLP)
+ {
+ RlcProcDedLcUlData(&rlcUlRbfuPst, 0, datInd);
+ }
+ else
+ {
+ DU_LOG("\nERROR --> RLC UL : Received NULL buffer");
+ }
+ rguDatInd->msg=NULLP;
+ SRngIncrRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC);
+ elmIndx = NULLP;
+ rguDatInd = NULLP;
+
+ rngBufDeqIndx++;
+
+ //if(rngBufDeqIndx >= SS_RNG_MAX_ULMAC_TO_ULRLC_DQ_CNT)
+ // break;
+
+ if((elmIndx = SRngGetRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC)) == NULLP)
+ break;
+ }
+#else
+ elmIndx = SRngGetRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC);
+ while(NULLP != elmIndx)
+ {
+ datInd = (RguDDatIndInfo *)elmIndx;
+ RlcProcDedLcUlData(&rlcUlRbfuPst, 0, datInd);
+
+ elmIndx = NULLP;
+ datInd = NULLP;
+ SRngIncrRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC);
+
+ if((elmIndx = SRngGetRIndx(SS_RNG_BUF_ULMAC_TO_ULRLC)) == NULLP)
+ break;
+ }
+#endif
+ return ROK;
+
+}
+
+/**
+ *
+ * @brief
+ * Handler to clear Ring buffer from UL RLC
+ *
+ * @details
+ * This function clears all the ring buffer content from UL RLC
+ *
+ * @return S16
+ * -# ROK
+ * -# RFAILED
+ *
+ */
+Void rlcUtlFreeUlRBuf(void)
+{
+ RguDDatIndInfo *datInd;
+ PTR elem;
+ uint8_t numLch;
+ uint8_t numPdu;
+
+ /* Free SS_RNG_BUF_ULMAC_TO_ULRLC */
+ while((SDeqSRngBuf (SS_RNG_BUF_ULMAC_TO_ULRLC, &elem) == ROK))
+ {
+ datInd = (RguDDatIndInfo *)elem;
+ for(numLch = 0; numLch< datInd->numLch; numLch++)
+ {
+ for(numPdu = 0; numPdu < datInd->lchData[numLch].pdu.numPdu; numPdu++)
+ {
+ if(datInd->lchData[numLch].pdu.mBuf[numPdu])
+ {
+ ODU_PUT_MSG_BUF(datInd->lchData[numLch].pdu.mBuf[numPdu]);
+ }
+ }
+ }
+ RLC_PST_FREE(0, 0, datInd, sizeof(RguDDatIndInfo));
+ }
+}
+#endif
+#ifdef RLC_MAC_STA_RSP_RBUF
+S16 rlcLiRguStaRspRbuf(Pst *post,SpId spId,Void *staRsp)
+{
+ S16 ret1 = ROK;
+
+ Void *elem = NULLP;
+
+ RguDStaRspInfo *staRspInfo = NULL;
+ elem = SRngGetWIndx(SS_RNG_BUF_DLRLC_TO_DLMAC);
+ if (NULLP != elem)
+ {
+ staRspInfo = (RguDStaRspInfo *)elem;
+ memcpy(staRspInfo, staRsp, sizeof(RguDStaRspInfo));
+ staRspInfo->post = *post;
+ SRngIncrWIndx(SS_RNG_BUF_DLRLC_TO_DLMAC);
+ SsRngInfoTbl[SS_RNG_BUF_DLRLC_TO_DLMAC].pktRate++;
+ }
+ else
+ {
+ DU_LOG("\nERROR --> RLC_DL : RLC DL STA RSP RBUF is FULL!!! ");
+ SsRngInfoTbl[SS_RNG_BUF_DLRLC_TO_DLMAC].pktDrop++;
+ ret1 = RFAILED;
+ }
+ return (ret1);
+} /* cmPkRlcDatReq */
+
+#endif
+#ifdef RLC_MAC_DAT_REQ_RBUF
+S16 rlcLiRguDatReqRbuf(Pst *post,SpId spId,Void *datReq)
+{
+ S16 ret1 = ROK;
+
+ Void *elem = NULLP;
+ RguInfoRingElem *datReqRing=NULLP;
+ elem = SRngGetWIndx(SS_RNG_BUF_DLRLC_TO_DLMAC_DAT_REQ);
+ if (NULLP != elem)
+ {
+ datReqRing = (RguInfoRingElem *) elem;
+ datReqRing->spId = spId;
+ datReqRing->event = post->event;
+ datReqRing->msg =datReq;
+ SRngIncrWIndx(SS_RNG_BUF_DLRLC_TO_DLMAC_DAT_REQ);
+ SsRngInfoTbl[SS_RNG_BUF_DLRLC_TO_DLMAC_DAT_REQ].pktRate++;
+ }
+ else
+ {
+ DU_LOG("\nERROR --> RLC_DL : RLC DL DAT REQ RBUF is FULL!!! \n");
+ SsRngInfoTbl[SS_RNG_BUF_DLRLC_TO_DLMAC_DAT_REQ].pktDrop++;
+ ret1 = RFAILED;
+ }
+ return (ret1);
+} /* cmPkRlcDatReq */
+
+#endif
+
/****************************************************************************
* KWU Interface Mt functions
***************************************************************************/\f
#ifdef __cplusplus
}
#endif /* __cplusplus */
-/********************************************************************30**
+
+/************************************************************************
End of file
**********************************************************************/
Desc:
- File: l2_tenb_stats.c
+ File: rlc_stats.c
**********************************************************************/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* RLC error options */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_ul.h"
+#include "rlc_err.h" /* RLC error options */
+#include "rlc_env.h" /* RLC environment options */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_ul.x"
#ifdef TENB_STATS
#include "l2_tenb_stats.x" /* Total EnodeB Stats declarations */
#endif
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_ul.h"
+
#ifdef TENB_STATS
TSL2CellStatsCb* l2CellStats[L2_STATS_MAX_CELLS];
TSL2UeStatsCb* l2UeStats[L2_STATS_MAX_UES];
Desc: <description of file contents>
- File: kw_id.c
+ File: rlc_sys_id.c
*********************************************************************21*/
--rlcTmmRcvFrmMac
--kwTmmReEstablish
- File: kw_tmm_dl.c
+ File: rlc_tmm_dl.c
**********************************************************************/
/**
- * @file kw_tmm_dl.c
+ * @file rlc_tmm_dl.c
* @brief RLC Transparent Mode module
*/
\f
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_env.h" /* RLC environment options */
+#include "rlc_env.h" /* RLC environment options */
+#include "rlc_err.h" /* RLC defines */
+
-#include "kw.h" /* RLC defines */
-#include "kw_err.h" /* RLC defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-#include "rlc_utils.h"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
#include "rlc_mac_inf.h"
#include "rlc_lwr_inf_api.h"
--rlcTmmRcvFrmMac
--kwTmmReEstablish
- File: kw_tmm_ul.c
+ File: rlc_tmm_ul.c
**********************************************************************/
-/** @file kw_tmm_ul.c
+/** @file rlc_tmm_ul.c
@brief RLC Transparent Mode module
*/
\f
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_env.h" /* RLC environment options */
+#include "rlc_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_err.h" /* RLC defines */
-#include "kw_ul.h"
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_ul.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_err.h" /* RLC defines */
+#include "rlc_ul.h"
#include "du_app_rlc_inf.h"
-#include "rlc_utils.h"
#include "rlc_upr_inf_api.h"
#if defined(PRE_DEF_UE_CTX) || defined(PRE_DEF_UE_CTX_HO)
- rlcTmrExpiry
- rlcBndTmrExpiry
- File: kw_tmr.c
+ File: rlc_tmr.c
*********************************************************************21*/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_env.h" /* RLC environment options */
-
-#include "kw.h" /* RLC defines */
-#include "kw_err.h" /* Error defines */
-#include "kw_ul.h"
-#include "kw_udx.h"
-#include "kw_dl.h"
+#include "rlc_env.h" /* RLC environment options */
+#include "rlc_err.h" /* Error defines */
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-#include "kw_ul.x"
-
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
+#include "rlc_ul.h"
/**
* @file gp_tmr.c
* @brief RLC Timer Module
################################################################################
*******************************************************************************/
-/********************************************************************20**
+/**********************************************************************
- Name: NR RLC file for uplink and non real time tasks
+ Name: NR RLC file for uplink and non real time tasks
- Type: C include file
+ Type: C include file
- Desc: This file contains all the data structures and
- prototypes for RLC in the uplink.
+ Desc: This file contains helper macros for RLC uplink
+ and non real time tasks
- File: kw_ul.x
-
-*********************************************************************21*/
+ File: rlc_ul.h
+
+**********************************************************************/
/**
- * @file kw_ul.x
- * @brief RLC uplink structures, prototypes
+ * @file rlc_ul.h
+ * @brief RLC uplink helper macros
*/
-#ifndef __KW_ULX__
-#define __KW_ULX__
-
+#ifndef __RLC_ULH__
+#define __RLC_ULH__
+
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
+/**
+ * @def RLC_MEAS_IS_UL_IP_MEAS_ON_FOR_RB
+ *
+ * This macro is used to check if UL IP throughput measurement is ON
+ * or off for the passed rb
+ *
+ * Returns TRUE(non-zero) if measurement is ON else FALSE (zero)
+ *
+ * @param[in] _gCb RLC UL Cb
+ * @param[in] _rbCb RLC uplink control block
+ *
+*/
+#define RLC_MEAS_IS_UL_IP_MEAS_ON_FOR_RB(_gCb, _rbCb) \
+ ((_rbCb->rlcId.rbType == CM_LTE_DRB) && \
+ (_gCb->u.ulCb->rlcL2Cb.measOn[_rbCb->qci] & LKW_L2MEAS_UL_IP) && \
+ (_rbCb->rbL2Cb.measOn & LKW_L2MEAS_UL_IP))
+
typedef struct rlcUlUeCb RlcUlUeCb;
/**
}
#endif /* __cplusplus */
-#endif /* __KW_ULX__ */
-\f
-/********************************************************************30**
+#endif /* __RLC_ULH__ */
+/**********************************************************************
End of file
**********************************************************************/
Desc: C source code for the interface to System Services
of NR RLC
- File: kw_ul_ex_ms.c
+ File: rlc_ul_msg_router.c
*********************************************************************21*/
-/** @file kw_ul_ex_ms.c
+/** @file rlc_ul_msg_router.c
@brief RLC System Services Interface
*/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_err.h" /* Err defines */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_ul.h"
-#include "kw_udx.h"
+#include "rlc_err.h" /* Err defines */
+#include "rlc_env.h" /* RLC environment options */
+
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "ckw.x" /* CKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw.x"
-#include "kw_ul.x"
-#include "kw_udx.x"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_ul.h"
#include "rlc_mac_inf.h"
#include "du_app_rlc_inf.h"
#include "l2_tenb_stats.x"
#endif
+
S16 rlcUlInitExt ARGS (( Void ));
\f
/**
--rlcUmmReAssembleSdus
--kwUmmReEstablish
- File: kw_umm_dl.c
+ File: rlc_umm_dl.c
**********************************************************************/
/**
- * @file kw_umm_dl.c
+ * @file rlc_umm_dl.c
* @brief RLC Unacknowledged Mode downlink module
*/
#include "kwu.h" /* RLC service user */
#include "lkw.h" /* LM Interface */
#include "rgu.h" /* MAC layer */
-#include "kw_env.h" /* RLC environment options */
+#include "rlc_env.h" /* RLC environment options */
+#include "rlc_err.h"
+
-#include "kw.h" /* RLC layer */
-#include "kw_err.h"
-#include "kw_udx.h"
-#include "kw_dl.h"
/* header/extern include files (.x) */
#include "lkw.x" /* LM Interface */
#include "rgu.x" /* MAC later */
-#include "kw.x" /* RLC layer */
-#include "kw_udx.x"
-#include "kw_dl.x"
+#include "rlc_utils.h" /* RLC layer */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
#define RLC_MODULE (RLC_DBGMASK_UM | RLC_DBGMASK_DL)
RLC_UPD_L2_DL_DISC_SDU_STS(gCb, rbCb);
#endif
rbCb->m.umDl.bo -= sdu->sduSz;
- RLC_RMV_SDU(gCb,&rbCb->m.umDl.sduQ,sdu);
+ RLC_REMOVE_SDU(gCb,&rbCb->m.umDl.sduQ,sdu);
continue;
}
}
umHdr.so = 0;
}
rlcUmmCreatePdu(gCb, rbCb, pdu, &umHdr, pduInfo);
- RLC_RMV_SDU(gCb,&(rbCb->m.umDl.sduQ),sdu); /* kw003.201 */
+ RLC_REMOVE_SDU(gCb,&(rbCb->m.umDl.sduQ),sdu); /* kw003.201 */
rlcUtlIncrementKwuStsSduTx(gCb->u.dlCb->rlcKwuDlSap + rbCb->k1wuSapId);
pdu = NULLP;
}
if (sdu->mode.um.sduId == sduId && sdu->mode.um.isSegmented == FALSE)
{
/* kw005.201 added support for L2 Measurement */
- RLC_RMV_SDU(gCb,&rbCb->m.umDl.sduQ,sdu);
+ RLC_REMOVE_SDU(gCb,&rbCb->m.umDl.sduQ,sdu);
gCb->genSts.numSduDisc++;
}
}
--rlcUmUlReAssembleSdus
--kwUmmReEstablish
- File: kw_umm_ul.c
+ File: rlc_umm_ul.c
**********************************************************************/
/**
- * @file kw_umm_ul.c
+ * @file rlc_umm_ul.c
* @brief RLC Unacknowledged Mode uplink module
*/
#include "kwu.h" /* RLC service user */
#include "lkw.h" /* LM Interface */
#include "rgu.h" /* MAC layer */
-#include "kw_env.h" /* RLC environment options */
-
-#include "kw.h" /* RLC layer */
-#include "kw_err.h"
-#include "kw_ul.h"
-
+#include "rlc_env.h" /* RLC environment options */
/* header/extern include files (.x) */
#include "lkw.x" /* LM Interface */
#include "rgu.x" /* MAC later */
-#include "kw.x" /* RLC layer */
-#include "kw_ul.x"
+#include "rlc_utils.h" /* RLC layer */
+#include "rlc_err.h"
+#include "rlc_ul.h"
#define RLC_MODULE (RLC_DBGMASK_UM | RLC_DBGMASK_UL)
**********************************************************************/
/**
- * @file kw_uim.c
+ * @file rlc_upr_inf_mgr.c
* @brief RLC Upper Interface Module
*/
#include "ckw.h" /* CKW defines */
#include "kwu.h" /* KWU defines */
#include "rgu.h" /* RGU defines */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_dl.h"
-#include "kw_ul.h"
-#include "kw_udx.h"
+#include "rlc_env.h" /* RLC environment options */
+#include "rlc_err.h"
+
/* extern (.x) include files */
#include "lkw.x" /* LKW */
#include "ckw.x" /* CKW */
#include "kwu.x" /* KWU */
#include "rgu.x" /* RGU */
-#include "kw_err.h"
-#include "kw.x"
-#include "kw_udx.x"
-#include "kw_dl.x"
-#include "kw_ul.x"
-
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h"
+#include "rlc_ul.h"
/*****************************************************************************
* CKW INTERFACE
****************************************************************************/
################################################################################
*******************************************************************************/
+/**********************************************************************
+
+ Name: NR RLC file
+
+ Type: C include file
+
+ Desc: This file contain the hash definations for RLC
+
+ File: kw.h
+
+**********************************************************************/
+/** @file rlc_utils.h
+@brief RLC Hash definitions
+*/
+
+#ifndef __RLC_UTILS_H__
+#define __RLC_UTILS_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+#include "du_log.h"
+\f
+
+#define EKWxxx 1
+#define EMG099 1
+#define EMG102 2
+#define EMG103 3
+#define EMG104 4
+
+/* RLC-SPLIT Activity */
+#define RLC_ONE 1
+#define RLC_BIT0 0x01
+#define RLC_BIT1 0x02
+#define RLC_BIT2 0x04
+#define RLC_BIT3 0x08
+
+#define RLC_2K_BYTE 2048
+
+/* RLC RB flag bits */
+#define RLC_RB_REESTABLISH_DL RLC_BIT0
+#define RLC_RB_REESTABLISH_UL RLC_BIT1
+#define RLC_RB_DELETE_DL RLC_BIT2
+#define RLC_RB_DELETE_UL RLC_BIT3
+
+
+#define RLC_MOD_1024 0x3FF /* used for MOD 1024 */
+
+
+\f
+/************************************************************************
+ * SAP States
+ ************************************************************************/
+
+#define RLC_SAP_NOT_CFG 0 /*!< SAP Not Configured */
+#define RLC_SAP_CFG 1 /*!< SAP Configured but not not bound */
+#define RLC_SAP_BND 2 /*!< SAP Bound */
+#define RLC_SAP_BINDING 3 /*!< SAP Bind initiated */
+#define RLC_SAP_UBND 4 /*!< SAP Unbind */
+
+#define RLC_MAX_SAP_BND_RETRY 3 /*!< Maximum SAP Bin Retries */
+
+#define RLC_MAX_UE 0xffffffff /*!< Maximum number of UEs. */
+
+/* Maximum number of Saps */
+#define RLC_MAX_UDXSAPS 1 /*!< Maximum number of UDX Saps */
+#define RLC_MAX_KWUSAPS 2 /*!< Maximum number of KWU Saps. */
+#define RLC_MAX_CKWSAPS 1 /*!< Maximum number of CKW Saps. */
+/*MCELL changes*/
+#define RLC_MAX_RGUSAPS 4//5 /*!< Maximum number of RGU Saps. */
+
+#define RLC_MAX_RGUSAP_TMR 1 /*!< Maximum number of RGU SAP Timers. */
+
+#define RLC_UI_RRC 0 /*!< Upper interface RRC sap Id. */
+#define RLC_UI_PDCP 1 /*!< Upper interface PDCP sap Id. */
+
+#ifdef LTE_L2_MEAS
+/* TODO. This works for FDD only. For TDD the array dimension
+ * should be changed according to the number of Harq Procs */
+#define RLC_MAX_TB_PER_UE 64 /*!< Maximum number of tbCb for UE */
+#define RLC_INVALID_TBID RLC_MAX_TB_PER_UE
+#endif
+/*******************************************************************************
+ * Memory related Defines
+ ******************************************************************************/
+/* Allocate function */
+
+#define RLC_ALLOC(_cb,_buf, _size) \
+{ \
+ if (SGetSBuf(_cb->init.region, _cb->init.pool, (Data **)&_buf, \
+ (Size) _size) == ROK) \
+ { \
+ memset((_buf), 0, _size); \
+ } \
+ else \
+ { \
+ (_buf) = NULLP; \
+ } \
+}
+
+#define RLC_FREE(_cb,_buf, _size) \
+{ \
+ if (_buf != NULLP) \
+ { \
+ (Void) SPutSBuf(_cb->init.region, _cb->init.pool, \
+ (Data *) _buf, (Size) _size); \
+ _buf = NULLP; \
+ } \
+}
+
+#define RLC_FREE_SHRABL_BUF(_region, _pool,_buf, _size) \
+{ \
+ if (_buf != NULLP) \
+ { \
+ (Void) SPutStaticBuffer(_region, _pool, \
+ (Data *) _buf, (Size) _size, 0); \
+ _buf = NULLP; \
+ } \
+}
+
+#define RLC_FREE_SHRABL_BUF_WC(_region, _pool,_buf, _size) \
+{ \
+ (Void) SPutStaticBuffer(_region, _pool, \
+ (Data *) _buf, (Size) _size, 0); \
+ _buf = NULLP; \
+}
+
+#define RLC_ALLOC_SHRABL_BUF_WC(_region, _pool,_buf, _size) \
+{ \
+ SGetStaticBuffer(_region, _pool, (Data **)&_buf, \
+ (Size) _size, 0); \
+}
+
+#define RLC_ALLOC_SHRABL_BUF(_region, _pool,_buf, _size) \
+{ \
+ if (SGetStaticBuffer(_region, _pool, (Data **)&_buf, \
+ (Size) _size, 0) == ROK) \
+ { \
+ memset((_buf), 0, _size); \
+ } \
+ else \
+ { \
+ (_buf) = NULLP; \
+ } \
+}
+
+#define RLC_ALLOC_WC(_cb,_buf, _size) \
+ SGetSBuf(_cb->init.region, _cb->init.pool, (Data **)&_buf, (Size) _size)
+
+#define RLC_REMOVE_SDU(_cb,_sduQ,_sdu) \
+{ \
+ if(_sdu->mBuf) \
+ { \
+ SPutMsg(_sdu->mBuf); \
+ } \
+ cmLListDelFrm(_sduQ,&_sdu->lstEnt); \
+ RLC_FREE(_cb,_sdu, sizeof(RlcSdu)); \
+}
+
+/* kw002.201 Freeing from region of pst */
+#define RLC_PST_FREE(_region, _pool, _buf, _size) \
+{ \
+ if (_buf != NULLP) \
+ { \
+ (Void) SPutSBuf(_region, _pool, \
+ (Data *) _buf, (Size) _size); \
+ _buf = NULLP; \
+ } \
+}
+
+#ifdef XEON_SPECIFIC_CHANGES
+#ifdef SS_LOCKLESS_MEMORY
+#define RLC_SHRABL_STATIC_BUF_FREE(_region, _pool, _buf, _size) \
+{ \
+ if (_buf != NULLP) \
+ { \
+ (Void) SPutStaticBuffer(_region, _pool, \
+ (Data *) _buf, (Size) _size, 0); \
+ _buf = NULLP; \
+ } \
+}
+
+#define RLC_SHRABL_STATIC_BUF_ALLOC(_region, _pool, _buf, _size) \
+{ \
+ SGetStaticBuffer(_region, _pool, (Data **)&_buf, \
+ (Size) _size, 0); \
+}
+
+#else
+
+#define RLC_SHRABL_STATIC_BUF_FREE(_region, _pool, _buf, _size) \
+{ \
+ if (_buf != NULLP) \
+ { \
+ (Void) SPutSBuf(_region, _pool, \
+ (Data *) _buf, (Size) _size); \
+ _buf = NULLP; \
+ } \
+}
+
+#define RLC_SHRABL_STATIC_BUF_ALLOC(_region, _pool, _buf, _size) \
+{ \
+ SGetSBuf(_region, _pool, (Data **)&_buf, \
+ (Size) _size); \
+}
+#endif /* SS_LOCKLESS_MEMORY */
+
+#else
+
+#define RLC_SHRABL_STATIC_BUF_FREE(_region, _pool, _buf, _size) \
+{ \
+ if (_buf != NULLP) \
+ { \
+ (Void) SPutStaticBuffer(_region, _pool, \
+ (Data *) _buf, (Size) _size, 0); \
+ _buf = NULLP; \
+ } \
+}
+
+#define RLC_SHRABL_STATIC_BUF_ALLOC(_region, _pool, _buf, _size) \
+{ \
+ SGetStaticBuffer(_region, _pool, (Data **)&_buf, \
+ (Size) _size, 0); \
+}
+#endif
+
+#define RLC_MEM_CPY(_dst, _src, _size) memcpy(_dst, _src, _size);
+
+#define RLC_MEM_ZERO(_buf, _size) memset((_buf), 0, _size);
+
+#define RLC_GET_MEM_REGION(_cb) (_cb->init.region)
+
+#define RLC_GET_MEM_POOL(_cb) (_cb->init.pool)
+
+#define RLC_GET_MEM_POOL_ADDRESS(_cb) (&_cb->init.pool)
+
+/* Memset to value */
+#define RLC_MEM_SET(_arg, _val, _size) memset(_arg, _val, _size);
+
+/* Alarms */
+/* Send an alarm for sapId events */
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+#define RLC_GETSDUIDX(_sduIdx) \
+{\
+ _sduIdx = (((_sduIdx)+1) % RLC_L2MEAS_MAX_OUTSTNGSDU);\
+}
+#define RLC_SEND_SAPID_ALARM(_cb,_sapId, _evnt, _cause) \
+{ \
+ rlcLmmSendAlarm(_cb,LCM_CATEGORY_INTERFACE, _evnt, _cause, _sapId, 0, 0); \
+}
+#define RLC_SEND_UEID_ALARM(_cb,_ueId, _qci, _evnt, _cause) \
+{ \
+ rlcLmmSendAlarm(_cb,LCM_CATEGORY_INTERFACE, _evnt, _cause, 0, _ueId, _qci); \
+}
+#else /* LTE_L2_MEAS */
+#define RLC_SEND_SAPID_ALARM(_cb,_sapId, _evnt, _cause) \
+{ \
+ rlcLmmSendAlarm(_cb,LCM_CATEGORY_INTERFACE, _evnt, _cause, _sapId, 0); \
+}
+#define RLC_SEND_UEID_ALARM(_cb,_ueId, _evnt, _cause) \
+{ \
+ rlcLmmSendAlarm(_cb,LCM_CATEGORY_INTERFACE, _evnt, _cause, 0, _ueId); \
+}
+#endif /* LTE_L2_MEAS */
+
+/*******************************************************************************
+ * Common Defines
+ ******************************************************************************/
+
+/* RLC Configuration parameters */
+#define RLC_MAX_UL_LI (2 * RLC_MAX_LI)
+/*macro RLC_MAX_DL_LI is moved to rlc_env.h file */
+#define RLC_MAX_DAT RLC_MAXIMUM_DAT
+/*macro RLC_MAX_PDU is moved to rlc_env.h file */
+#define RLC_MAX_RB_PER_CELL 10
+#define RLC_MAX_SRB_PER_UE 3
+#define RLC_MAX_DRB_PER_UE 32
+#define RLC_MAX_LCH_PER_UE 12
+#define RLC_MAX_LCH_PER_CELL 6
+#define RLC_MAX_NUM_RB 24
+#define RLC_MAX_UE 0xffffffff
+#define RLC_UE_LIST_BUCKET_SIZE 128
+#define RLC_CELL_LIST_BUCKET_SIZE 10
+#define RLC_TRANS_ID_LST_BKT_SIZE 10
+#define RLC_MAX_RB 32
+
+/* RLC Mode defines */
+#define RLC_MODE_TM 1
+#define RLC_MODE_UM 2
+#define RLC_MODE_AM 3
+
+/* Direction defines */
+#define RLC_DIR_UL 1 /*!< Unlink direction */
+#define RLC_DIR_DL 2 /*!< Downlink direction */
+#define RLC_DIR_BOTH 3 /*!< Both Downlink and Unlink */
+
+#define RLC_DEF_SEQ_NUM 0 /**< Sequence number to pick in case of duplicate
+ entries in hash list searches*/
+
+/**
+ * @def RLC_MIN
+ *
+ * Macro to find the miniumum of two numbers
+ *
+ * @param[in] x First number
+ * @param[in] y Second number
+ *
+*/
+#define RLC_MIN(x,y) (x) < (y) ? (x) : (y)
+
+/**
+ * @def RLC_GET_RLCCB
+ *
+ * Macro to the RLC instance
+ *
+ * @param[in] _inst Instance Id
+ *
+*/
+#define RLC_GET_RLCCB(_inst) rlcCb[_inst]
+
+#define RLC_ADD_SDU 1 /*!< Add SDU. */
+#define RLC_DEL_SDU 2 /*!< Delete SDU. */
+
+#define RLC_CFM_NOK 0 /*!< Do not send DatCfm */
+#define RLC_CFM_OK 1 /*!< Send DatCfm */
+
+/* Set the unsolictated Status flag */
+#define RLC_SET_USTA_FLAG(_rlcCb, _value) \
+{ \
+ _rlcCb->init.usta = _value; \
+}
+
+/* Macros to get the init parameters */
+#define RLC_GET_DBG_MASK(_rlcCb) (_rlcCb->init.dbgMask)
+#define RLC_GET_LMPST_MEM_POOL(_rlcCb) (_rlcCb->init.lmPst.pool)
+#define RLC_GET_LMPST_MEM_REGION(_rlcCb) (_rlcCb->init.lmPst.region)
+
+/* Macros for configuration module */
+#define RLC_CFG_FILL_CFG_CFM(_entCfm, _rbId, _rbType, _status, _reason) \
+{ \
+ _entCfm->rbId = _rbId; \
+ _entCfm->rbType = _rbType; \
+ _entCfm->status.status = _status; \
+ _entCfm->status.reason = _reason; \
+}
+
+/**
+ * @def RLC_VALIDATE_UE_RBID
+ *
+ * This macro validates whether the _rbId passed is valid or not. It checks
+ * if the _rbId is within the maximum value depending on the _rbType.
+ * Returns TRUE if valid else FALSE
+ *
+ * @param[in] _rbType Type of the Radio Bearer; SRB or DRB
+ * @param[in] _rbId RB Id of the RB to be validated
+ *
+*/
+#define RLC_VALIDATE_UE_RBID(_rbType, _rbId) \
+ ((_rbType == CM_LTE_SRB && _rbId < RLC_MAX_SRB_PER_UE) || \
+ (_rbType == CM_LTE_DRB && _rbId < RLC_MAX_DRB_PER_UE))
+
+/*******************************************************************************
+ * UIM Defines
+ ******************************************************************************/
+#if (ERRCLASS & ERRCLS_INT_PAR)
+#define RLC_VALDATE_SAP(_cb,_chkSpId, _sap, _ret) \
+{ \
+ if (_chkSpId != _sap->spId) \
+ { \
+ RLCLOGERROR(_cb,ERRCLS_DEBUG, EKWxxx, (ErrVal) RFAILED, \
+ "Sap Id Validation Failed."); \
+ _ret = RFAILED; \
+ } \
+ /* SAP state validation */ \
+ if(_sap->state != RLC_SAP_BND) \
+ { \
+ RLCLOGERROR(_cb,ERRCLS_INT_PAR, EKWXXX, (ErrVal) RFAILED, \
+ "Sap State Invalid."); \
+ RLC_SEND_SAPID_ALARM(_cb,0, LCM_EVENT_UI_INV_EVT, LCM_CAUSE_INV_STATE); \
+ _ret = RFAILED; \
+ } \
+}
+#else /* ERRCLASS & ERRCLS_INT_PAR */
+#define RLC_VALDATE_SAP(_cb,_chkSpId, _sap, _ret) \
+{ \
+ /* SAP state validation */ \
+ if(_sap->state != RLC_SAP_BND) \
+ { \
+ RLCLOGERROR(_cb,ERRCLS_INT_PAR, EKWXXX, (ErrVal) RFAILED, \
+ "Sap State Invalid."); \
+ RLC_SEND_SAPID_ALARM(_cb,0, LCM_EVENT_UI_INV_EVT, LCM_CAUSE_INV_STATE); \
+ _ret = RFAILED; \
+ } \
+}
+#endif /* ERRCLASS & ERRCLS_INT_PAR */
+
+/*******************************************************************************
+ * Timer Defines
+ ******************************************************************************/
+#define RLC_TMR_LEN 10
+#define RLC_MAX_UM_TMR 1
+#define RLC_MAX_AM_TMR 3
+#define RLC_MAX_THPT_TMR 1
+
+/* Timer events */
+#define EVENT_RLC_UMUL_REASSEMBLE_TMR 1
+#define EVENT_RLC_AMUL_REASSEMBLE_TMR 2
+#define EVENT_RLC_AMUL_STA_PROH_TMR 3
+#define EVENT_RLC_AMDL_POLL_RETX_TMR 4
+#define EVENT_RLC_WAIT_BNDCFM 5
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+#define EVENT_RLC_L2_TMR 6
+#endif /* LTE_L2_MEAS */
+#define EVENT_RLC_THROUGHPUT_TMR 7
+
+/*******************************************************************************
+ * DBM Defines
+ ******************************************************************************/
+/**
+ * @def RLC_DBM_GET_RBCB_FROM_UECB
+ *
+ * This macro makes _rbCb point to the RB in _ueCb based on the passed
+ * _rbId and _rbType. _rbCb can point to NULLP
+ *
+ * @param[in] _rbId RB Id of the RB to be fetched
+ * @param[in] _rbType Type of the RB, SRB or DRB
+ * @param[in] _ueCb Pointer to the UECb for which to get the RB
+ * @param[out] _rbCb Pointer to the found RbCb
+ *
+*/
+#define RLC_DBM_GET_RBCB_FROM_UECB(_rbId, _rbType, _ueCb, _rbCb) \
+ (_rbCb) = ((_rbType) == CM_LTE_SRB) ? (_ueCb)->srbCb[(_rbId)] : \
+ (_ueCb)->drbCb[(_rbId)];
+/**
+ * @def RLC_DBM_GET_CELL_RBCB
+ *
+ * This macro makes _rbCb point to the RB in the _rbCbLst.
+ * _rbCb can point to NULLP
+ *
+ * @param[in] _rbId RB Id of the RB to be fetched
+ * @param[in] _rbCbLst Pointer to array of RBCbs
+ * @param[out] _rbCb Pointer to the found RbCb
+ *
+*/
+#define RLC_DBM_GET_CELL_RBCB(_rbId, _rbCbLst, _rbCb) \
+ (_rbCb) = (_rbCbLst)[(_rbId)];
+
+/*******************************************************************************
+ * UMM Defines
+ ******************************************************************************/
+#define RLC_UMDL rbCb->m.umDl
+#define RLC_UMUL rbCb->m.umUl
+
+/* Sequence Number length defines */
+#define RLC_UM_CFG_6BIT_SN_LEN 1 /**< UM 6-bit Sequence number length
+ in bytes*/
+#define RLC_UM_CFG_12BIT_SN_LEN 2 /**< UM 12-bit Sequence number length
+ in bytes*/
+/* 5GNR */
+/* Sequence Number length defines */
+#define RLC_AM_CFG_12BIT_SN_LEN 1 /**< AM 12-bit Sequence number length
+ in bytes*/
+#define RLC_AM_CFG_18BIT_SN_LEN 2 /**< AM 18-bit Sequence number length
+ in bytes*/
+
+/**
+ * @def RLC_REMOVE_MAC_HDR_SZ
+ *
+ * If PDU size is greater than 127, MAC header would be 3 bytes else 2 bytes
+ *
+ * @param[in,out] _pduSz Size of the pdu
+ *
+*/
+#define RLC_REMOVE_MAC_HDR_SZ(_pduSz) (_pduSz) -= ((_pduSz) > 127) ? 3 : 2;
+
+/**
+ * @def RLC_UM_GET_VALUE
+ *
+ * This macro is used to calculate the value of UM state variables used
+ * in comparisons. VR(UH) - UM Window Size is taken as the base modulus.
+ * Returns the modifed value
+ *
+ * @param[in] _val Value of the state variable
+ * @param[in] _kwUmUl Um Uplink control block
+ *
+*/
+#define RLC_UM_GET_VALUE(_val,_kwUmUl) \
+ (((_val) - ((_kwUmUl).vrUh - (_kwUmUl).umWinSz)) & ((_kwUmUl).modBitMask))
+
+/*******************************************************************************
+ * AMM Defines
+ ******************************************************************************/
+#define RLC_AMDL rbCb->m.amDl
+#define RLC_AMUL rbCb->m.amUl
+
+/* PDU Types */
+#define RLC_DATA_PDU 1
+#define RLC_CNTRL_PDU 0
+
+#define RLC_FI_FIRST_SEG 0x02
+#define RLC_FI_LAST_SEG 0x01
+#define RLC_SI_FIRST_SEG 0x01
+#define RLC_SI_LAST_SEG 0x02
+#define RLC_SI_MID_SEG 0x03
+
+#define RLC_POLL_SET 0x40 /* 01000000 */
+#define RLC_POLL_UNSET 0xbf /* 10111111 */
+#define RLC_MAX_NACK_CNT 100
+/*RLC_MAX_CNTRL_FIELDS (Maximum size of Status Pdu)
+ * = MAX_NACK_CNT * sizeof(NACK_SN,E1,E2,E3,soStart,soEnd, nackRange)
+ * for 18 bit SN + Fixed Header*/
+#define RLC_MAX_CNTRL_FIELDS ((RLC_MAX_NACK_CNT * 8) + 3)
+
+/* Each LI(Length Indicator) holds approx 1+1/2 byte and some other fields thus keeping Header Size equal to twice of MAX LI */
+/* 5GNR_RLC: Need to change value of HDRSZ as per number of PDUs going in one datReq */
+#define RLC_MIN_HDRSZ 1
+#define RLC_MAX_HDRSZ 5
+#define RLC_AM_PDU_FIXED_HDRSZ 2
+#define RLC_AM_PDU_12BIT_SN_HDRSZ 2
+#define RLC_AM_PDU_18BIT_SN_HDRSZ 3
+#define RLC_AM_SEG_12BIT_SN_WITH_SO_HDRSZ 4
+#define RLC_AM_SEG_18BIT_SN_WITH_SO_HDRSZ 5
+#define RLC_AM_SEG_12BIT_SN_WITHOUT_SO_HDRSZ 2
+#define RLC_AM_SEG_18BIT_SN_WITHOUT_SO_HDRSZ 3
+#define RLC_EXTN_HDRSZ 2
+#define RLC_CNTRL_PDU_FIXED_HDRSZ 3
+#define RLC_MAC_HDR_SZ2 2
+#define RLC_MAC_HDR_SZ3 3
+#define RLC_BYTE_LEN 8
+#define RLC_2BYTE_LEN 16
+#define RLC_E1_LEN 1
+#define RLC_NACK_E1E2_LEN 12
+#define RLC_SO_LEN 15
+#define RLC_DC_LEN 1
+#define RLC_CPT_LEN 3
+#define RLC_RF_LEN 1
+#define RLC_P_LEN 1
+#define RLC_FI_LEN 2
+#define RLC_SI_LEN 2
+#define RLC_E_LEN 1
+#define RLC_SN_LEN 10
+#define RLC_SN_LEN_12BITS 12
+#define RLC_SN_LEN_18BITS 18
+#define RLC_LSF_LEN 1
+#define RLC_LI_LEN 11
+#define RLC_STA_PDU_R_BITS_ACKSN_12BITS 7 /* 5GNR : Num Reserved bits in STATUS PDU */
+#define RLC_STA_PDU_R_BITS_ACKSN_18BITS 1
+#define RLC_STA_PDU_R_BITS_NACKSN_12BITS 1
+#define RLC_STA_PDU_R_BITS_NACKSN_18BITS 3
+#define RLC_NACK_RANGE_LEN 8
+#define RLC_SO_LEN_5GNR 16
+
+#define RLC_DC_POS 0x80
+#define RLC_DC_SHT 7
+#define RLC_POLL_POS 0x40 /* 5GNR */
+#define RLC_POLL_SHT 6 /* 5GNR */
+#define RLC_SI_POS 0x30 /* 5GNR */
+#define RLC_SI_SHT 4 /* 5GNR */
+#define RLC_SN_POS_12BIT 0x0F
+#define RLC_SN_POS_18BIT 0x03
+#define RLC_AM_GET_WIN_SZ(_snLen) ((RLC_AM_CFG_12BIT_SN_LEN == (_snLen)) ? (2048) : (131072)) /* 5GNR */
+#define RLC_RCV_BUF_BIN_SIZE 512 /* receive buffer size */
+#define RLC_TX_BUF_BIN_SIZE 512 /* receive buffer size */
+
+#define RLC_SDU_LST 1
+#define RLC_SEG_LST 2
+#define RLC_RETX_LST 3
+#define RLC_ALL_BYTES_MISSING 0xffff
+
+#define RLC_MAX_PDU_MAP 30 /*!< Maximum PDU Map. */
+
+#define RLC_LLIST_FIRST_SDU(lstCp, nod) \
+{ \
+ CmLList *tmpNode; \
+ /*CM_LLIST_FIRST_NODE(&(lstCp), tmpNode);*/ \
+ /*if (tmpNode != NULLP)*/ \
+ if((tmpNode=cmLListFirst(&lstCp))) \
+ nod = (RlcSdu *)tmpNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+
+#define RLC_LLIST_FIRST_SEG(lstCp, nod) \
+{ \
+ CmLList *tmpNode; \
+ /*CM_LLIST_FIRST_NODE(&(lstCp), tmpNode);*/ \
+ /*if (tmpNode != NULLP)*/ \
+ if((tmpNode=cmLListFirst(&lstCp))) \
+ nod = (RlcSeg *)tmpNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+#define RLC_LLIST_FIRST_RETX(lstCp, nod) \
+{ \
+ CmLList *tmpNode; \
+ /*CM_LLIST_FIRST_NODE(&(lstCp), tmpNode);*/ \
+ /*if (tmpNode != NULLP)*/ \
+ if((tmpNode=cmLListFirst(&lstCp))) \
+ nod = (RlcRetx *)tmpNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+#define RLC_LLIST_NEXT_SDU(lstCp, nod) \
+{ \
+ CmLList *tmpNode; \
+ /*CM_LLIST_NEXT_NODE(&(lstCp), tmpNode);*/ \
+ /*if (tmpNode != NULLP) */ \
+ if((tmpNode = cmLListNext(&lstCp))) \
+ nod = (RlcSdu *)tmpNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+
+#define RLC_LLIST_NEXT_SEG(lstCp, nod) \
+{ \
+ CmLList *tmpNode; \
+ (lstCp).crnt = &((nod)->lstEnt); \
+ /*CM_LLIST_NEXT_NODE(&(lstCp), tmpNode);*/ \
+ /*if (tmpNode != NULLP)*/ \
+ if((tmpNode = cmLListNext(&lstCp))) \
+ nod = (RlcSeg *)tmpNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+
+#define RLC_LLIST_NEXT_RETX(lstCp, nod) \
+{ \
+ CmLList *tmpNode; \
+ /*CM_LLIST_NEXT_NODE(&(lstCp), tmpNode);*/ \
+ /*if (tmpNode != NULLP) */ \
+ if ((tmpNode = cmLListNext(&lstCp))) \
+ nod = (RlcRetx *)tmpNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+
+#define RLC_LLIST_LAST_RETX(lstCp, nod) \
+{ \
+ CmLList *tempNode = NULLP; \
+ cmLListLast(&lstCp); \
+ tempNode = cmLListCrnt(&lstCp); \
+ if (tempNode != NULLP) \
+ nod = (RlcRetx *)tempNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+#define RLC_LLIST_LAST_SEG(lstCp, nod) \
+{ \
+ CmLList *tempNode = NULLP; \
+ cmLListLast(&lstCp); \
+ tempNode = cmLListCrnt(&lstCp); \
+ if (tempNode != NULLP) \
+ nod = (RlcSeg *)tempNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+#define RLC_LLIST_LAST_SDU(lstCp, nod) \
+{ \
+ CmLList *tempNode = NULLP; \
+ cmLListLast(&lstCp); \
+ tempNode = cmLListCrnt(&lstCp); \
+ if (tempNode != NULLP) \
+ nod = (RlcSdu *)tempNode->node; \
+ else \
+ nod = NULLP; \
+}
+
+#define CM_LLIST_INS_AFT_CRNT(lstCp, nod) \
+{ \
+ CmLList *nodeToIns = &nod->lstEnt;\
+ nodeToIns->node = (PTR) nod;\
+ cmLListInsAfterCrnt(&lstCp, nodeToIns); \
+}
+
+#define CM_LLIST_INS_BEF_CRNT(lstCp, nod) \
+{ \
+ CmLList *nodeToIns = &nod->lstEnt; \
+ nodeToIns->node = (PTR) nod; \
+ cmLListInsCrnt(&lstCp, nodeToIns); \
+}
+
+#define RLC_LLIST_DEL_RECBUF(_recBuf) \
+{ \
+ RlcSeg *_seg = NULLP; \
+ RLC_LLIST_FIRST_SEG(_recBuf->segLst, _seg); \
+ while (_seg) \
+ { \
+ cmLListDelFrm(&_recBuf->segLst, &_seg->lstEnt); \
+ RLC_FREE(_seg, sizeof(RlcSeg)); \
+ RLC_LLIST_NEXT_SEG(_recBuf->segLst, _seg); \
+ } \
+}
+
+#define RLC_UMM_LLIST_FIRST_SEG(lstCp, nod) \
+{ \
+ CmLList *tmpNode; \
+ if((tmpNode=cmLListFirst(&lstCp))) \
+ nod = (RlcUmSeg *)tmpNode->node; \
+ else \
+ nod = NULLP; \
+} /*!< um mode first segment of linked list*/
+
+#define RLC_UMM_LLIST_NEXT_SEG(lstCp, nod) \
+{ \
+ CmLList *tmpNode; \
+ (lstCp).crnt = &((nod)->lstEnt); \
+ if((tmpNode = cmLListNext(&lstCp))) \
+ nod = (RlcUmSeg *)tmpNode->node; \
+ else \
+ nod = NULLP; \
+}/*!< next segment in um mode linked list*/
+
+#define MODAMT(x, y, z,_snModMask) \
+{ \
+ y = (x - z) & _snModMask; \
+}
+
+#define MODAMR(x, y, z , _snModMask) \
+{ \
+ y = (x - z) & (_snModMask); \
+}
+
+/**
+ * @def RLC_AM_IS_TRANS_WIN_STALLED
+ *
+ * This macro is used to check if the AM transmit window is stalled or not.
+ * The tramist window is stalled when the distance between txNext and txNextAck
+ * is greater than equal to Window Size. Actually it should never be greater
+ * than Window Size.
+ * Returns TRUE if the window is stalled else FALSE
+ *
+ * @param[in] _amDl AM Downlink control block
+ *
+*/
+#define RLC_AM_IS_TRANS_WIN_STALLED(_amDl) \
+ ((((_amDl)->txNext - (_amDl)->txNextAck) & _amDl->snModMask) >= (RLC_AM_GET_WIN_SZ(_amDl->snLen)))
+
+#ifdef TENB_STATS
+#define RLC_AM_TRANS_WIN_SIZE(_amDl) \
+ (((_amDl)->txNext - (_amDl)->txNextAck) & _amDl->snModMask)
+#endif
+
+#define RLC_AM_IS_POLL_BIT_SET(_amDl) \
+ (RLC_AMDL.pollSn == ((RLC_AMDL.txNext - 1) & RLC_AMDL.snModMask))
+
+#define RLC_FILL_CNTRL_INFO(cntrlInfo, _val, _len, _idx, _eb)\
+{ \
+ cntrlInfo.val = _val; \
+ cntrlInfo.len = _len; \
+ cntrlInfo.idx = _idx; \
+ cntrlInfo.emtBits = _eb; \
+}
+#define RLC_FILL_PREV_IDX(cntrlInfo, _e1Idx, _e1eb, _idx, _eb) \
+{ \
+ _e1Idx = cntrlInfo.e1Idx; \
+ _e1eb = cntrlInfo.e1eb; \
+ _idx = cntrlInfo.idx; \
+ _eb = cntrlInfo.emtBits; \
+}
+
+#define RLC_FILL_HDR_ARGS(hdrInfo, _val, _len) \
+{ \
+ hdrInfo.val = _val; \
+ hdrInfo.len = _len; \
+}
+
+/* kw003.201 - This macro provides the header size other than the */
+/* fixed header of 2 bytes for each AMD PDU or 4 bytes*/
+/* for an AM PDU segment */
+#define RLC_AM_EXTN_HDRSZ(_numLi, _eHdrSz) \
+{ \
+ if ((_numLi - 1) % 2) \
+ { \
+ _eHdrSz = ((3 * (_numLi - 2)) >> 1) + 2; \
+ } \
+ else \
+ { \
+ _eHdrSz = (3 * (_numLi - 1)) >> 1; \
+ } \
+}
+
+/* Update poll bit in the buffer */
+#define RLC_UPD_POLL_BIT(_gCb, _retx, _poll) \
+{ \
+ uint8_t fHdr; \
+ \
+ if (_poll != _retx->amHdr.p) \
+ { \
+ /* Get the first byte of the buffer */ \
+ SRemPreMsg((Data *)&fHdr, _retx->seg); \
+ if (_poll == TRUE) \
+ { \
+ fHdr = fHdr | RLC_POLL_SET; \
+ } \
+ else \
+ { \
+ fHdr = fHdr & RLC_POLL_UNSET; \
+ } \
+ /* Concatenated updated hdr to the mBuf */ \
+ SAddPreMsg ((Data)fHdr, _retx->seg); \
+ } \
+ /* Update poll bit in the hdrInfo */ \
+ _retx->amHdr.p = _poll; \
+}
+
+#define RLC_AM_ELIMINATE_EXTN_HDR(_pduSz, _sduSz, _numLi) \
+{ \
+ if ( (_pduSz > _sduSz) && (_sduSz < 2048) ) \
+ { \
+ _pduSz -= (_numLi % 2) ? 1 : 2; \
+ } \
+}
+/**
+ * @def RLC_AM_CHK_SN_WITHIN_RECV_WINDOW
+ *
+ * This macro is used to check if a Sequence Number falls within the AM
+ * reception window or not.
+ * The condition is VR(R) <= SN < VR(MR), which are subtracting the base
+ * modulus becomes 0 <= (SN - VR(R)) % SNLen < (VR(MR) - VR(R)) % SnLen
+ * NOTE: Careful with the parantheses
+ *
+ * Returns TRUE if within the window; FALSE otherwise
+ *
+ * @param[in] _sn The sequence number to be checked
+ * @param[in] _amUl AM Uplink control block
+ *
+*/
+#define RLC_AM_CHK_SN_WITHIN_RECV_WINDOW(_sn, _amUl) \
+ ((((_sn) - (_amUl->rxNext)) & (_amUl->snModMask)) < (((_amUl->vrMr) - (_amUl->rxNext)) & (_amUl->snModMask)))
+
+#define RLC_POWER(x, y) x << (y-1);
+
+#ifndef L2_OPTMZ
+#define rlcCpyMsg(_cb,x, y) \
+ (SAddMsgRef((x), RLC_GET_MEM_REGION(_cb), RLC_GET_MEM_POOL(_cb), (y)))
+#else
+/* L2 optimization for mUe/Tti: Removing dup buf*/
+#define rlcCpyMsg(_cb,x, y) \
+ (SIncMsgRef((x), RLC_GET_MEM_REGION(_cb), RLC_GET_MEM_POOL(_cb), (y)))
+#endif
+
+// printf("Copy Msg %x \n",x);
+
+/*******************************************************************************
+ * Debugging Defines
+ ******************************************************************************/
+#define RLC_DBG_SUB_MASK DBGMASK_MI /**< Use for sub-mask */
+#define RLC_DBGMASK_DETAIL (RLC_DBG_SUB_MASK << 0) /**< Parameters, It will give
+ in depth info */
+#define RLC_DBGMASK_BRIEF (RLC_DBG_SUB_MASK << 1) /**< Info, It will give info at
+ entry and exit places along
+ with certain state changes */
+#define RLC_DBGMASK_ERROR (RLC_DBG_SUB_MASK << 2) /**< Error information */
+#define RLC_DBGMASK_FATAL (RLC_DBG_SUB_MASK << 3) /**< FATAL errors like memory
+ resource failure etc., */
+
+#define RLC_DBG_MDL_MASK (RLC_DBG_SUB_MASK << 4)
+
+#define RLC_DBGMASK_TM (RLC_DBG_MDL_MASK << 0) /**< TM */
+#define RLC_DBGMASK_UM (RLC_DBG_MDL_MASK << 1) /**< UM */
+#define RLC_DBGMASK_AM (RLC_DBG_MDL_MASK << 2) /**< AM */
+#define RLC_DBGMASK_DL (RLC_DBG_MDL_MASK << 3) /**< DL */
+#define RLC_DBGMASK_UL (RLC_DBG_MDL_MASK << 4) /**< UL */
+#define RLC_DBGMASK_CFG (RLC_DBG_MDL_MASK << 5) /**< CFG */
+#define RLC_DBGMASK_LMM (RLC_DBG_MDL_MASK << 6) /**< LMM */
+#define RLC_DBGMASK_INF (RLC_DBG_MDL_MASK << 7) /**< UI, LI */
+#define RLC_DBGMASK_DUT (RLC_DBG_MDL_MASK << 8) /**< DBM, UTL, TMR */
+#define RLC_DBGMASK_MBUF_PRNT (RLC_DBG_MDL_MASK << 9) /**< MBUF, useful in
+ integrated
+ testing */
+#define RLC_DBGMASK_MEM_INFO (RLC_DBG_MDL_MASK << 10) /**< Print SSI memory
+ information*/
+#define RLC_DBGMASK_UDX (RLC_DBG_MDL_MASK << 11) /**< UDX interface */
+
+#ifdef DEBUGP
+#define RLC_PRNT_BORDER \
+do \
+{ \
+ RLC_PRNT((_kwPBuf, "\n==========================\n")); \
+}while(0)
+
+#define RLC_PRNT_HLINE(_cb,_pMsg) \
+{ \
+ sprintf((_cb)->init.prntBuf, "[RLC_LAYER: %s:%d]::", __FILE__, __LINE__); \
+ SPrint((_cb)->init.prntBuf); \
+ RLC_PRNT_TSTAMP(_cb); \
+ sprintf((_cb)->init.prntBuf, _pMsg); \
+ SPrint((_cb)->init.prntBuf); \
+}
+
+#define RLC_PRNT(_cb,_prntbuf) \
+{ \
+ sprintf _prntbuf; \
+ SPrint(_cb->init.prntBuf); \
+}
+
+#define RLC_PRINT_TO_BUFFER(_cb,...) \
+{ \
+ snprintf((_cb)->init.prntBuf, PRNTSZE, "[%s]::", __func__); \
+ SPrint((_cb)->init.prntBuf); \
+ snprintf(_cb->init.prntBuf, PRNTSZE,__VA_ARGS__); \
+ SPrint(_cb->init.prntBuf); \
+}
+
+#define RLC_PRNT_TSTAMP(_cb) \
+{ \
+ S8 _buf[60]; \
+ DateTime dt; \
+ memset((&dt), 0, sizeof(DateTime)); \
+ SGetDateTime(&dt); \
+ sprintf(_buf, "date: %02d/%02d/%04d time: %02d:%02d:%02d", \
+ (int)dt.month,(int)dt.day,(int)dt.year + 1900, \
+ (int)dt.hour,(int)dt.min,(int)dt.sec); \
+ RLC_PRNT(_cb,(_cb->init.prntBuf,("[%s]", _buf))); \
+}
+
+#define RLC_PRNT_MBUF(_cb,_mBufPtr) \
+do \
+{ \
+ if(_cb->init.dbgMask & (RLC_DBGMASK_MBUF_PRNT)) \
+ { \
+ RLC_PRNT_HLINE(_cb,("\nMessage Buffer Contents:\n")); \
+ SPrntMsg ((Buffer *)_mBufPtr, 0, 0); \
+ } \
+}while(0)
+
+#define RLC_PRNT_MEMINFO(_cb) \
+do \
+{ \
+ uint32_t _memInfo; \
+ if(_cb->init.dbgMask & (RLC_DBGMASK_MEM_INFO)) \
+ { \
+ RLC_PRNT_HLINE(_cb,("\nMemory Information:\n")); \
+ SRegInfoShow(0, &_memInfo); \
+ } \
+}while(0)
+
+#define RLCDBGP_INTERNAL(_cb,_mask,...) \
+do \
+{ \
+ if (!((_cb->init.dbgMask & _mask) ^ _mask)) \
+ { \
+ RLC_PRINT_TO_BUFFER(_cb, __VA_ARGS__); \
+ } \
+}while(0)
+
+#define RLCDBGP_ERROR(_cb, ...) \
+ RLCDBGP_INTERNAL(_cb,(RLC_DBGMASK_ERROR | RLC_MODULE),__VA_ARGS__)
+
+#define RLCDBGP_DETAIL(_cb, ...) \
+ RLCDBGP_INTERNAL(_cb,(RLC_DBGMASK_DETAIL | RLC_MODULE),__VA_ARGS__)
+
+#define RLCDBGP_BRIEF(_cb, ...) \
+ RLCDBGP_INTERNAL(_cb,(RLC_DBGMASK_BRIEF | RLC_MODULE),__VA_ARGS__)
+
+#else /* DEBUGP */
+#define RLC_PRNT_HLINE(_cb,_pMsg)
+#define RLC_PRNT(_cb,_prntbuf)
+#define RLC_PRNT_TSTAMP(_cb)
+#define RLC_PRNT_MBUF(_cb,_mBufPtr)
+#define RLC_PRNT_MEMINFO(_cb)
+#define RLCDBGP(_cb,_mask, _arg)
+#define RLCDBGP_ERROR(_cb, ...)
+#define RLCDBGP_DETAIL(_cb, ...)
+#define RLCDBGP_BRIEF(_cb, ...)
+#endif /* DEBUGP */
+
+/*******************************************************************************
+ * LMM Defines
+ ******************************************************************************/
+#define RLC_LMM_RB_STS_INC(_cb) (_cb)->genSts.numOfRb++;
+
+#define RLC_LMM_RB_STS_DEC(_cb) (_cb)->genSts.numOfRb--;
+
+#if defined(SS_MULTICORE_SUPPORT) && defined(SS_M_PROTO_REGION)
+#define RLC_FILL_SAP_HELPER(_Sap, _cfg, _gCb)\
+{\
+ _Sap->pst.selector = _cfg->selector; \
+ _Sap->pst.route = _cfg->route; \
+ _Sap->pst.prior = _cfg->priority; \
+ _Sap->pst.region = _gCb->init.region;\
+ _Sap->pst.pool = _gCb->init.pool;\
+ _Sap->pst.dstProcId = _cfg->procId; \
+ _Sap->pst.dstEnt = _cfg->ent; \
+ _Sap->pst.dstInst = _cfg->inst; \
+ _Sap->pst.srcProcId = _gCb->init.procId; \
+ _Sap->pst.srcEnt = _gCb->init.ent; \
+ _Sap->pst.srcInst = _gCb->init.inst; \
+ _Sap->pst.event = EVTNONE; \
+ _Sap->spId = _cfg->sapId; \
+ _Sap->state = RLC_SAP_CFG; \
+}
+#else /* defined(SS_MULTICORE_SUPPORT) && defined(SS_M_PROTO_REGION) */
+#define RLC_FILL_SAP_HELPER(_Sap, _cfg, _gCb)\
+{\
+ _Sap->pst.selector = _cfg->selector; \
+ _Sap->pst.route = _cfg->route; \
+ _Sap->pst.prior = _cfg->priority; \
+ _Sap->pst.region = _cfg->mem.region;\
+ _Sap->pst.pool = _cfg->mem.pool;\
+ _Sap->pst.dstProcId = _cfg->procId;\
+ _Sap->pst.dstEnt = _cfg->ent;\
+ _Sap->pst.dstInst = _cfg->inst;\
+ _Sap->pst.srcProcId = _gCb->init.procId;\
+ _Sap->pst.srcEnt = _gCb->init.ent;\
+ _Sap->pst.srcInst = _gCb->init.inst;\
+ _Sap->pst.event = EVTNONE;\
+ _Sap->spId = _cfg->sapId;\
+ _Sap->state = RLC_SAP_CFG;\
+}
+#endif
+
+/*******************************************************************************
+ * UDX Defines
+ ******************************************************************************/
+#define RLC_GET_DL_SAPCB(_cb, _rbCb) (_cb->u.dlCb->udxDlSap + _rbCb->udxSapId)
+#define RLC_GET_UDX_SAP(_cb) (_cb->u.ulCb->udxUlSap)
+
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+#define RLC_L2_MAX_TIMERS 1
+#define RLC_QCI_LIST_BUCKET_SIZE 10
+#define RLC_TB_LIST_BUCKET_SIZE 10
+#define RLC_MAX_L2MEAS_EVT 10
+/* L2 Measurement index to be used in rbCb to store measData */
+#define RLC_L2MEAS_ACT_UE 0
+#define RLC_L2MEAS_DL_DELAY 1
+#define RLC_L2MEAS_DL_DISC 2
+#define RLC_L2MEAS_UU_LOSS 3
+#define RLC_L2MEAS_DL_IP 4
+#define RLC_L2MEAS_UL_IP 5
+#endif /* LTE_L2_MEAS */
+
+#define RLC_RDWR_LOCK(_lockPtr)
+#define RLC_RDWR_UNLOCK(_lockPtr)
+#define RLC_TIME_DIFF(t1,t2) \
+ (t1<t2 ? ((0xffffffff - t2) + t1 ): (t1 - t2))
+
+/*******************************************************************/
+
/* Memory */
#define RLC_MEM_REGION_UL 1
#define RLC_MEM_REGION_DL 4
pst.intfVer = 0; \
}
+/** @brief global variables */
uint16_t getTransId();
+/** @brief Local typedefs */
+typedef uint32_t RlcSn; /*!< Sequence Number length */
+
+typedef RguDDatIndInfo KwDatIndInfo;
+
+typedef RguDStaIndInfo KwDStaIndInfo;
+
+typedef RguPduInfo KwPduInfo; /* kw002.201 : Aligning the structure with RGU */
+
+typedef struct _amRlcStats
+{
+ uint32_t numDLStaPduSent;
+ uint32_t numDLNacksInStaPdu;
+ uint32_t numDLBytesUnused;
+ uint32_t numDLPollTimerExpiresSrb;
+ uint32_t numDLPollTimerExpiresDrb;
+ uint32_t numDLMaxRetx;
+ uint32_t numDLRetransPdus;
+ uint32_t numULPdusDiscarded;
+ uint32_t numULReAsmblTimerExpires;
+ uint32_t numULStaPduRcvd;
+ uint32_t numULNackInStaPduRcvd;
+ uint32_t numRlcAmCellSduTx; /* Count of SDUs transmitted in DL for all UEs */
+ uint32_t numRlcAmCellSduBytesTx; /*Total number of bytes transmitted in DL for all Ues */
+ uint32_t numRlcAmCellRetxPdu; /*Count of PDUs retransmitted for all Ues */
+ uint32_t numRlcAmMaxRetx; /*Total number of Max-RLC retransmissions hit for all the Ues */
+ uint32_t numRlcAmCellDupPduRx; /*Count of Duplicate PDUs detected for a UE in UL for all Ues */
+ uint32_t numRlcAmCellDropOutWinRx; /*Count of PDUs dropped due to Out of Window reception for all Ues */
+ uint32_t numRlcAmCellSduRx; /* Count of SDUs received in UL for all UEs*/
+ uint32_t numRlcAmCellSduBytesRx;/*Total number of bytes received in UL for all Ues*/
+ uint32_t numRlcAmCellNackRx; /*Total number of UL PDUs nacked for all the Ues*/
+ uint32_t numRlcAmCellWinStall; /*Number of window stalls detected for all the Ues */
+}AMRLCStats;
+
+typedef struct _umRlcStats
+{
+ uint32_t numDLBytesUnused;
+ uint32_t numDLMaxRetx;
+ uint32_t numULPdusDiscarded;
+ uint32_t numULReAsmblTimerExpires;
+ uint32_t numULPdusOutsideWindow;
+}UMRLCStats;
+
+typedef struct _rlcStats
+{
+ AMRLCStats amRlcStats;
+ UMRLCStats umRlcStats;
+}RLCStats;
+
+RLCStats gRlcStats;
+
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+typedef struct rlcSduSnMap RlcSduSnMap;
+typedef RguLchMapInfo KwLchMapInfo;
+#endif /* LTE_L2_MEAS */
+
+/** @defgroup ummode UM Module Info
+*/
+/**
+ * @brief Structure to hold an Unacknowledged Mode header
+ *
+ * @details
+ * - si : Segmentation Info
+ * - sn : Sequence number
+ * - so : Segmentation offset
+*/
+typedef struct rlcUmHdr
+{
+ uint8_t si; /*!< Segmentation Info */
+ RlcSn sn; /*!< Sequence number */
+ uint16_t so; /*!< Segmentation offset */
+}RlcUmHdr;
+
+/**
+ * @brief Structure to hold an Acknowledged Mode header
+ *
+ * @details
+ * - dc : Data/Control PDU
+ * - rf : Resegmentation flag
+ * - p : Poll bit
+ * - fi : Framing Info
+ * - e : Extension bit
+ * - lsf : Last segment flat
+ * - sn : Sequence number
+ * - so : Segment offset
+ * - numLi : Number of length indicators in the following array (li)
+ * - li : Length indicators
+*/
+typedef struct rlcAmHdr
+{
+ uint8_t dc; /*!< Data/Control PDU */
+ uint8_t p; /*!< Poll bit */
+ uint8_t si; /*!< Segmentation Info: 5GNR */
+ RlcSn sn; /*!< Sequence number */
+ uint32_t so; /*!< Segment offset */
+}RlcAmHdr;
+
+/* structures used for encoding/decoding the headers */
+typedef struct rlcCntrlInfo
+{
+ uint16_t val;
+ uint8_t len;
+ uint16_t idx;
+ uint8_t emtBits;
+ uint16_t e1Idx;
+ uint16_t e2Idx;
+ uint8_t e1eb;
+}RlcCntrlInfo;
+
+typedef struct rlcHdrInfo
+{
+ uint32_t val;
+ uint8_t len;
+ uint8_t eb;
+ uint8_t *hdr;
+ uint16_t idx;
+ uint8_t pEb;
+ uint8_t pLen;
+}RlcHdrInfo;
+
+typedef struct rlcExtHdr
+{
+ uint32_t val;
+ uint16_t len;
+ uint8_t hdr;
+ uint8_t pLen;
+}RlcExtHdr;
+
+/**
+ * @brief Structure to hold information about a Logical channel
+ *
+ * @details
+ * - lChId : Logical channel Id
+ * - lChType : Logical channel type
+*/
+typedef struct rlcLchInfo
+{
+ CmLteLcId lChId; /*!< Logical channel Id */
+ CmLteLcType lChType; /*!< Logical channel type */
+}RlcLchInfo;
+
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+
+/** @struct RlcL2Cntr
+ * RLC L2 Counter */
+typedef struct rlcL2Cntr
+{
+ struct
+ {
+ uint32_t numActvUe; /*!< number of active Ue */
+ uint32_t sampOc; /*!< Total number of sampling occasion */
+ }actUe;
+ struct
+ {
+ uint32_t dLoss; /*!< Total number of lost packets */
+ uint32_t posPkts; /*!< Total number of positively acknowlegded
+ packets */
+ }uuLoss;
+ struct /*!< For DL IP throughput */
+ {
+ uint32_t volSummation; /*!< Sum of data in bytes */
+ uint32_t timeSummation; /*!< Sum of time difference in milli sec*/
+ }dlIpThruput;
+ struct /*!< For UL IP throughput */
+ {
+ uint32_t volSummation; /*!< Sum of data in bytes */
+ uint32_t timeSummation; /*!< Sum of time difference in milli sec*/
+ }ulIpThruput;
+ /* Discard new changes starts */
+ struct /*!< For UL IP throughput */
+ {
+ uint32_t discSdus; /*!< Total RLC SDUs discarded */
+ uint32_t totSdus; /*!< Total RLC SDUs received */
+ }dlDisc;
+ struct /*!< For UL IP throughput */
+ {
+ uint64_t sduDelay; /*!< Total SDUs delay */
+ uint32_t numSdus;
+ }dlPjSduDelay;
+ uint32_t totDrbsPerQci; /*!< Total Count of DRB's for this QCI */
+}RlcL2Cntr;
+
+struct rlcSduSnMap
+{
+ CmLList lstEnt;
+ Bool failMarked;
+ Bool fullySent;
+ uint32_t sduId;
+ uint16_t numSn;
+ uint16_t snList[RLC_MAX_PDU_MAP];
+ uint16_t harqAck;
+ uint16_t reqSent;
+ uint16_t rspRcvd;
+};
+
+typedef struct rlcSnSduMap
+{
+ uint16_t sn;
+ CmLteLcId lChId; /*!< Logical channel Id */
+ uint16_t numSdu;
+#ifdef LTE_RLC_R9
+ Bool isBurstSplitted; /*!< true: burst for this LCH is splitted */
+#endif /* LTE_RLC_R9 */
+ RlcSduSnMap *sduList[RLC_MAX_DL_LI];
+}RlcSnSduMap;
+
+typedef struct rlcTbSnMap
+{
+ CmHashListEnt hlTbEnt;
+ uint32_t tbId;
+ uint16_t prevNumSn;
+ uint16_t numSn;
+ RlcSnSduMap snSduMap[RGU_MAX_PDU * RGU_MAX_LC];
+}RlcTbSnMap;
+
+typedef struct rlcL2MeasCbUeMeasInfo
+{
+ CmLteRnti ueId; /*!< UE ID (Used only for IP Throughput
+ in UL/DL */
+ CmLteCellId cellId; /*!< UE ID (Used only for IP Throughput
+ in UL/DL */
+ Bool isValid; /*! < is this UE entry valid */
+ uint8_t numLcId; /*!< Holds the number of LCh for which Ul Ip
+ measurement is ON */
+ uint8_t lcId[RLC_MAX_LCH_PER_UE]; /*!< Holds the list of LCh for which Ul ip
+ measurement is ON */
+ RlcL2Cntr measData[LKW_MAX_QCI];
+ uint16_t numQci; /*!< number of valid qcI */
+ uint8_t qci[LKW_MAX_QCI]; /*!< list of valid qcI */
+}RlcL2MeasCbUeMeasInfo;
+
+typedef struct rlcL2MeasCbIpThMeas
+{
+ uint8_t numUes;
+ uint8_t totNumQci;
+ uint8_t totQci[LKW_MAX_QCI];
+ RlcL2MeasCbUeMeasInfo ueInfoLst[LKW_MAX_UE]; /*Added for handling meas for multiple ues*/
+}RlcL2MeasCbIpThMeas;
+
+typedef struct rlcL2MeasCbNonIpThMeas
+{
+ uint16_t numSamples; /*!< Number of samples to take on numActUe */
+ uint16_t numQci; /*!< number of valid qcI */
+ uint8_t qci[LKW_MAX_QCI]; /*!< list of valid qcI */
+ RlcL2Cntr measData[LKW_MAX_QCI]; /*!< Measurement CB */
+}RlcL2MeasCbNonIpThMeas;
+
+typedef union rlcL2MeasCbIpNonIpThMeasVal
+{
+ RlcL2MeasCbIpThMeas ipThMeas;
+ RlcL2MeasCbNonIpThMeas nonIpThMeas;
+}RlcL2MeasCbIpNonIpThMeasVal;
+
+/** @struct RlcL2MeasCb
+ * RLC L2 Measurement CB */
+typedef struct rlcL2MeasCb
+{
+ uint8_t measType; /*!< Bit-wise set measurement types */
+ RlcL2MeasCbIpNonIpThMeasVal val; /* Union of IP tpt or non-ip tpt */
+}RlcL2MeasCb;
+
+/** @struct RlcL2MeasEvtCb
+ * RLC L2 Measurement Evt CB */
+typedef struct rlcL2MeasEvtCb
+{
+ uint32_t transId; /*!< TransId of Measurement Req */
+ uint32_t cbIdx; /*!< TransId of Measurement Req */
+ CmTimer l2Tmr; /* NOT USED */ /*!< L2 Timer per request */
+ TmrCfg l2TmrCfg; /* NOT USED */ /*!< Time period of measurement */
+ RlcL2MeasCb measCb; /*!< Measurement CB */
+ EpcTime startTime; /* NOT USED */ /*!< start time when meas starts*/
+}RlcL2MeasEvtCb;
+
+/** @struct RlcL2MeasRbCb
+ * RLC L2 Measurement Rb CB */
+typedef struct rlcL2MeasRbCb
+{
+ uint8_t measOn; /*!< Measurements that are running */
+ RlcL2Cntr *l2Sts[RLC_MAX_L2MEAS_EVT]; /*!< L2 Mesurement statistics */
+}RlcL2MeasRbCb;
+
+/** @struct RlcL2Cb
+ * RLC L2 CB */
+typedef struct rlcL2Cb
+{
+ uint16_t rlcNumMeas; /*!< Number of measurements going on */
+ RlcL2MeasEvtCb rlcL2EvtCb[LKW_MAX_L2MEAS]; /*!< Pointers to Measurement Cb */
+ uint8_t measOn[LKW_MAX_QCI]; /*!< Measurement on */
+ uint32_t numActUe[LKW_MAX_QCI]; /*!< Measurement on */
+}RlcL2Cb;
+
+
+typedef enum _dlIpThrputState
+{
+ KW_DL_IPTHRU_RESET = 0,
+ KW_DL_IPTHRU_BURST_STARTED,
+ KW_DL_IPTHRU_BURST_CONTINUE,
+ KW_DL_IPTHRU_BURST_COMPLETED
+}DlIpThrputState;
+
+/**
+* @struct rlcL2MeasSduLst
+* Structure to hold parameters of
+* burst sdus in DL for a RB */
+typedef struct rlcOutStngSduInfo
+{
+ uint32_t sduId; /*!< SDU Id of sdu */
+ MsgLen sduLen; /*!< Size of sdu */
+ uint32_t numTb; /*!< Hold the number of TBs for this sdu in DL */
+}RlcOutStngSduInfo;
+
+/**
+* @struct rlcL2MeasDlIpTh
+* Structure to hold parameters for DL ip
+* throughput for a RB */
+typedef struct rlcL2MeasDlIpTh
+{
+ Bool isBurstAct; /*!< Set to TRUE when burst is active in DL */
+ uint64_t burstStartTime; /*!< Holds the starting time of the burst */
+ uint32_t burstEndSduId; /*!< Sdu ID when burst ends */
+ uint8_t lastSduIdx; /*!< Holds the index of last outStanding sdu */
+ RlcOutStngSduInfo outStngSduArr[RLC_L2MEAS_MAX_OUTSTNGSDU];/*!< Hold the burst sdu information */
+}RlcL2MeasDlIpTh;
+
+/**
+* @struct rlcL2MeasIpThruput
+* Structure to hold parameters for UL/DL ip
+* throughput for a RB */
+typedef struct rlcL2MeasIpThruput
+{
+ uint32_t dataVol; /*!< Holds volume of new data in bytes
+ for UL IP throughput */
+ uint32_t ttiCnt; /*!< Holds ttiCnt received from MAC in UL */
+ uint32_t prevTtiCnt; /*!< Holds previous ttiCnt received from MAC in UL */
+ RlcL2MeasDlIpTh dlIpTh;
+}RlcL2MeasIpThruput;
+
+#endif /* LTE_L2_MEAS */
+
+/**
+ * @brief Structure to hold an UE key for the UE hast lists
+ *
+ * @details
+ * - ueId : UE Id
+ * - cellId : Cell Id
+*/
+typedef struct rlcUeKey
+{
+ CmLteRnti ueId; /*!< UE Id */
+ CmLteCellId cellId; /*!< Cell Id */
+}RlcUeKey;
+
+/**
+ * @brief Structure to hold an information about the CKW SAP
+ *
+ * @details
+ * - pst : Service user post structure
+ * - spId : Service provider Id
+ * - suId : Service user Id
+ * - state : State of the SAP
+ * - sts : SAP specific statistics
+*/
+typedef struct rlcCkwSapCb
+{
+ Pst pst; /*!< Service user post structure */
+ SpId spId; /*!< Service provider Id */
+ SuId suId; /*!< Service user Id */
+ uint8_t state; /*!< Sap Status */
+ RlcCkwCntSts sts; /*!< Statistics */
+}RlcCkwSapCb;
+
+/**
+ * @brief Structure to hold an information about the KWU SAP
+ *
+ * @details
+ * - pst : Service user post structure
+ * - spId : Service provider Id
+ * - suId : Service user Id
+ * - state : State of the SAP
+ * - sts : SAP specific statistics
+*/
+typedef struct rlcKwuSapCb
+{
+ Pst pst; /*!< Service user post structure */
+ SpId spId; /*!< Service provider Id */
+ SuId suId; /*!< Service user Id */
+ uint8_t state; /*!< Sap Status */
+ RlcKwuSapSts sts; /*!< Statistics */
+}RlcKwuSapCb;
+
+/**
+ * @brief Structure to hold an information about the RGU SAP
+ *
+ * @details
+ * - pst : Service user post structure
+ * - spId : Service provider Id
+ * - suId : Service user Id
+ * - state : State of the SAP
+ * - bndTmr : Bind Timer
+ * - bndTmrInt : Timer Interval
+ * - retryCnt : Bind Retry Count
+*/
+typedef struct rlcRguSapCb
+{
+ Pst pst; /*!< Service user post structure */
+ SpId spId; /*!< Service provider Id */
+ SuId suId; /*!< Service user Id */
+ uint8_t state; /*!< Sap Status */
+ CmTimer bndTmr; /*!< Bind Timer */
+ uint16_t bndTmrInt; /*!< Timer Interval */
+ uint8_t retryCnt; /*!< Bind Retry Count */
+}RlcRguSapCb;
+
+/**
+ * @brief Structure to hold an information about the UDX UL SAP
+ *
+ * @details
+ * - pst : Service user post structure
+ * - spId : Service provider Id
+ * - suId : Service user Id
+ * - state : State of the SAP
+ * - bndTmr : Bind Timer
+ * - bndTmrInt : Timer Interval
+ * - retryCnt : Bind Retry Count
+*/
+typedef struct rlcUdxUlSapCb
+{
+ Pst pst; /*!< Service user post structure */
+ SpId spId; /*!< Service provider Id */
+ SuId suId; /*!< Service user Id */
+ uint8_t state; /*!< Sap Status */
+ CmTimer bndTmr; /*!< Bind Timer */
+ uint16_t bndTmrInt; /*!< Timer Interval */
+ uint8_t retryCnt; /*!< Bind Retry Count */
+}RlcUdxUlSapCb;
+
+/**
+ * @brief Structure to hold an information about the UDX DL SAP
+ *
+ * @details
+ * - pst : Service user post structure
+ * - spId : Service provider Id
+ * - suId : Service user Id
+ * - state : State of the SAP
+*/
+typedef struct rlcUdxDlSapCb
+{
+ Pst pst; /*!< Service user post structure */
+ SpId spId; /*!< Service provider Id */
+ SuId suId; /*!< Service user Id */
+ uint8_t state; /*!< Sap Status */
+}RlcUdxDlSapCb;
+
+/**
+ * @brief Structure to hold info about memory to be freed
+ *
+ * @details
+ * - sduLst : The SDU queues are appended to this queue, used
+ * for the UM SDU queues
+ * - txLst : Stores to be released AM Mode TX PDUs
+ * - reTxLst : Stores to be released AM Re TX PDU's
+ * - rbLst : List of AM DL RBs to be freed
+*/
+typedef struct rlcDlDataToBeFreed
+{
+ CmLListCp sduLst; /*!< Queue of SDU's to be freed */
+ CmLListCp txLst; /*!< Stores to be released TX PDUs */
+ CmLListCp reTxLst; /*!< Stores to be released ReTX PDUs */
+ CmLListCp rbLst; /*!< List of AM DL RBs to be freed */
+}RlcDlDataToBeFreed;
+
+/**
+ * @brief Structure to hold an information about DL RLC instance
+ *
+ * @details
+ * - numKwuSaps : Number of RLC KWU Saps
+ * - numUdxSaps : Number of RLC UDX Saps
+ * - rlcKwuDlSap : Pointer to the array of KWU SAPS
+ * - udxDlSap : Pointer to the array of UDX SAPS
+ * - rguDlSap : RGU Sap Control Block
+ * - cellLstCp : Hashlist of CellCb
+ * - ueLstCp : Hashlist of UeCb
+ * - toBeFreed : Pointer to data to be freed
+ * - shutdownReveived : Request for shutdown recevied or not
+ * - eventInQueue : Event for cleanup exists in queue or not
+ */
+typedef struct rlcDlCb
+{
+ uint8_t numKwuSaps; /*!< Number of RLC Data Saps */
+ uint8_t numUdxSaps; /*!< Number of RLC Data Saps */
+ RlcKwuSapCb *rlcKwuDlSap; /*!< KWU Sap Control Block */
+ RlcUdxDlSapCb *udxDlSap; /*!< UDX DL Sap Control Block */
+ RlcRguSapCb *rguDlSap; /*!< RGU Sap Control Block */
+ CmHashListCp cellLstCp; /*!< Hashlist of CellCb */
+ CmHashListCp ueLstCp; /*!< Hashlist of UeCb */
+ RlcDlDataToBeFreed toBeFreed; /*!< Pointer to data to be freed */
+ Pst selfPst; /*!< Pst to post events to self */
+ Buffer *selfPstMBuf; /*!< Buffer used for self post */
+ Bool shutdownReceived; /*!< Request for shutdown recevied */
+ Bool eventInQueue; /*!< Event exists in queue or not */
+#ifdef LTE_L2_MEAS
+ RlcL2Cb rlcL2Cb; /*!< Control Block for L2 Measurements in RLC */
+#endif /* LTE_L2_MEAS */
+}RlcDlCb;
+
+/**
+ * @brief Structure to hold an information about UL RLC instance
+ *
+ * @details
+ * - ckwSap : CKW Sap Conrol Block
+ * - numKwuSaps : Number of RLC KWU Saps
+ * - numUdxSaps : Number of RLC UDX Saps
+ * - udxUlSap : Pointer to the array of UDX SAPS
+ * - rlcKwuUlSap : Pointer to the array of KWU SAPS
+ * - rguUlSap : RGU Sap Control Block
+ * - cellLstCp : Hashlist of CellCb
+ * - ueLstCp : Hashlist of UeCb
+ * - transIdLstCp : Hashlist of cfg trans
+ */
+typedef struct rlcUlCb
+{
+ RlcCkwSapCb ckwSap; /*!< CKW Sap Conrol Block */
+ uint8_t numKwuSaps; /*!< Number of RLC Data Saps */
+ uint8_t numUdxSaps; /*!< Number of RLC Data Saps */
+ RlcUdxUlSapCb *udxUlSap; /*!< UDX DL Sap Control Block */
+ RlcKwuSapCb *rlcKwuUlSap; /*!< KWU Sap Control Block */
+ RlcRguSapCb *rguUlSap; /*!< RGU Sap Control Block */
+ CmHashListCp cellLstCp; /*!< Hashlist of CellCb */
+ CmHashListCp ueLstCp; /*!< Hashlist of UeCb */
+ CmHashListCp transIdLstCp; /*!< Hashlist of cfg trans */
+ uint8_t rlcUlUdxEventType; /*!<Ue Create/ReConfig> */
+/* kw005.201 added support for L2 Measurement */
+#ifdef LTE_L2_MEAS
+ RlcL2Cb rlcL2Cb; /*!< Control Block for L2 Measurements in RLC */
+#endif /* LTE_L2_MEAS */
+}RlcUlCb;
+
+typedef struct rlcThptPerUe
+{
+ uint16_t ueIdx;
+ uint64_t dataVol;
+}RlcThptPerUe;
+
+/**
+ * @brief Structure to hold information about throughput at RLC
+ *
+ */
+typedef struct rlcThpt
+{
+ Inst inst; /* RLC instance */
+ CmTimer thptTmr; /* Throughput Timer */
+ uint8_t numActvUe; /* Number of Active UEs */
+ RlcThptPerUe thptPerUe[MAX_NUM_UE]; /* Throughput calculated per UE */
+}RlcThpt;
+
+/**
+ * @brief Structure to hold an information about a RLC instance
+ *
+ * @details
+ * - init : Task Initialization Info
+ * - genCfg : General Configuration
+ * - genSts : General Statistics
+ * - trcLen : Trace Length
+ * - trcMask : Trace Mask
+ * - rlcTq : Timer queue
+ * - rlcTqCp : Timer queue control point
+ * - u : Union depending on whether the instance is UL or DL
+ * - ulCb : UL instance Control Block
+ * - dlCb : DL instance Control Block
+ */
+typedef struct rlcCb
+{
+ TskInit init; /*!< Task Initialization Info */
+ RlcGenCfg genCfg; /*!< General Configuration Structure */
+ RlcGenSts genSts; /*!< General Statistics */
+ S16 trcLen; /*!< Trace Length */
+ uint8_t trcMask; /*!< Trace Mask */
+ CmTqType rlcTq[RLC_TMR_LEN]; /*!< Timer queue */
+ CmTqCp rlcTqCp; /*!< Timer queue control point */
+ union
+ {
+ RlcUlCb *ulCb; /*!< Ul Control Block */
+ RlcDlCb *dlCb; /*!< Dl Control Block */
+ } u;
+ uint8_t dlSduId; /*!< Downlink SDU ID */
+ RlcThpt rlcThpt; /*!< Throughput at RLC*/
+}RlcCb;
+
+RlcCb *rlcCb[MAX_RLC_INSTANCES]; /*!< RLC global control block */
+
+/****************************************************************************
+ * Declarations
+ ***************************************************************************/
+S16 rlcGetSId ARGS((SystemId *s));
+
+Void rlcTmrExpiry ARGS((PTR cb, S16 tmrEvnt));
+
+S16 rlcLmmSendTrc ARGS ((RlcCb *gCb, Event event, Buffer *mBuf));
+
+void rlcStartTmr ARGS((RlcCb *gCb, PTR cb, S16 tmrEvnt));
+
+void rlcStopTmr ARGS((RlcCb *gCb, PTR cb, uint8_t tmrType));
+
+bool rlcChkTmr ARGS((RlcCb *gCb,PTR cb, S16 tmrEvnt));
+
+#ifdef LTE_L2_MEAS
+Void rlcLmmSendAlarm ARGS (( RlcCb *gCb,
+ uint16_t category,
+ uint16_t event,
+ uint16_t cause,
+ SuId suId,
+ uint32_t ueId,
+ uint8_t qci));
+
+S16 RlcMiRlcDlL2MeasReq ARGS (( Pst *pst, RlcL2MeasReqEvt *measReqEvt ));
+S16 RlcMiRlcDlL2MeasSendReq ARGS((Pst *pst,uint8_t measType));
+S16 RlcMiRlcDlL2MeasStopReq ARGS((Pst *pst,uint8_t measType));
+S16 RlcMiRlcUlL2MeasReq ARGS (( Pst *pst, RlcL2MeasReqEvt *measReqEvt ));
+S16 RlcMiRlcUlL2MeasSendReq ARGS((Pst *pst,uint8_t measType));
+S16 RlcMiRlcUlL2MeasStopReq ARGS((Pst *pst,uint8_t measType));
+Void rlcUtlPlcMeasDatInL2Sts ARGS((RlcL2Cntr *measData,
+ RlcL2MeasRbCb *rbL2Cb,
+ uint8_t measType));
+#else /* LTE_L2_MEAS */
+Void rlcLmmSendAlarm ARGS ((RlcCb *gCb,
+ uint16_t category,
+ uint16_t event,
+ uint16_t cause,
+ SuId suId,
+ uint32_t ueId));
+#endif /* LTE_L2_MEAS */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __RLC_UTILS_H__ */
/**********************************************************************
+
End of file
**********************************************************************/
--rlcUtlSendUlDataToDu
--kwUtlShutDown
- File: kw_utl_dl.c
+ File: rlc_utl_dl.c
**********************************************************************/
-/** @file kw_utl_dl.c
+/** @file rlc_utl_dl.c
@brief RLC Utility Module
*/
#include "lkw.h" /* LKW defines */
#include "rgu.h" /* RGU defiens */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_err.h" /* Error defines */
-#include "kw_udx.h"
-#include "kw_dl.h"
+#include "rlc_env.h" /* RLC environment options */
+#include "rlc_err.h" /* Error defines */
+
/* extern (.x) include files */
#include "ckw.x" /* CKW includes */
#include "lkw.x" /* LKW inlcudes */
#include "rgu.x" /* RGU includes */
-#include "kw.x" /* RLC includes */
-#include "kw_udx.x" /* UDX interface includes */
-#include "kw_dl.x" /* RLC downlink includes */
-
-#include "rlc_utils.h"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_dl_ul_inf.h"
+#include "rlc_dl.h" /* RLC downlink includes */
#include "rlc_mac_inf.h"
#include "du_app_rlc_inf.h"
#include "rlc_lwr_inf_api.h"
#endif
{
RlcSdu* sdu = (RlcSdu *)(lst->first->node);
- RLC_RMV_SDU(gCb, lst, sdu);
+ RLC_REMOVE_SDU(gCb, lst, sdu);
toBeFreed--;
}
--rlcUtlSendUlDataToDu
--kwUtlShutDown
- File: kw_utl_ul.c
+ File: rlc_utl_ul.c
**********************************************************************/
-/** @file kw_utl_ul.c
+/** @file rlc_utl_ul.c
@brief RLC Utility Module
*/
#include "kwu.h" /* KWU defines */
#include "lkw.h" /* LKW defines */
#include "rgu.h" /* RGU defines */
+#include "rlc_env.h" /* RLC environment options */
+#include "rlc_err.h" /* Error defines */
-#include "kw_env.h" /* RLC environment options */
-#include "kw.h" /* RLC defines */
-#include "kw_err.h" /* Error defines */
-#include "kw_ul.h" /* RLC Uplink defines */
/* extern (.x) include files */
#include "ckw.x" /* CKW includes */
#include "lkw.x" /* LKW includes */
#include "rgu.x" /* RGU includes */
-#include "kw.x" /* RLC inlcudes */
-#include "kw_ul.x" /* RLC uplink includes */
-#include "rlc_utils.h"
+#include "rlc_utils.h" /* RLC defines */
+#include "rlc_ul.h" /* RLC Uplink defines */
#include "du_app_rlc_inf.h"
#include "rlc_upr_inf_api.h"
/************************************************************************
- Name: LTE-MAC layer
+ Name: NR-SCH layer
Type: C source file
Desc: C source code SSI Interface Implementation
- File: rg_sch_ex_ms.c
+ File: sch_msg_router.c
**********************************************************************/
-/** @file rg_ex_ms.c
+/** @file sch_msg_router.c
@brief This file contains the implementation of callback functions
registered with SSI during the LTE MAC Task initialization.
*/
# limitations under the License. #
################################################################################
*******************************************************************************/
-
+/* File : du_mgr_msg_router.c */
/* This file contains message handling functionality for DU APP */
#include "common_def.h"
#include "lrg.h"
}
}
ret = fillAmbr(&macUeCfg->ambrCfg, ueCfgDb->ambrCfg);
-
duFillModulationDetails(macUeCfg, duMacDb, ueCfgDb->ueNrCapability);
}
Code Review / o-du / l2.git / commitdiff