--- /dev/null
+/**
+ * This is the default settings file provided by Node-RED.
+ *
+ * It can contain any valid JavaScript code that will get run when Node-RED
+ * is started.
+ *
+ * Lines that start with // are commented out.
+ * Each entry should be separated from the entries above and below by a comma ','
+ *
+ * For more information about individual settings, refer to the documentation:
+ * https://nodered.org/docs/user-guide/runtime/configuration
+ *
+ * The settings are split into the following sections:
+ * - Flow File and User Directory Settings
+ * - Security
+ * - Server Settings
+ * - Runtime Settings
+ * - Editor Settings
+ * - Node Settings
+ *
+ **/
+
+module.exports = {
+
+/*******************************************************************************
+ * Flow File and User Directory Settings
+ * - flowFile
+ * - credentialSecret
+ * - flowFilePretty
+ * - userDir
+ * - nodesDir
+ ******************************************************************************/
+
+ /** The file containing the flows. If not set, defaults to flows_<hostname>.json **/
+ flowFile: 'flows.json',
+
+ /** By default, credentials are encrypted in storage using a generated key. To
+ * specify your own secret, set the following property.
+ * If you want to disable encryption of credentials, set this property to false.
+ * Note: once you set this property, do not change it - doing so will prevent
+ * node-red from being able to decrypt your existing credentials and they will be
+ * lost.
+ */
+ //credentialSecret: "a-secret-key",
+
+ /** By default, the flow JSON will be formatted over multiple lines making
+ * it easier to compare changes when using version control.
+ * To disable pretty-printing of the JSON set the following property to false.
+ */
+ flowFilePretty: true,
+
+ /** By default, all user data is stored in a directory called `.node-red` under
+ * the user's home directory. To use a different location, the following
+ * property can be used
+ */
+ //userDir: '/home/nol/.node-red/',
+
+ /** Node-RED scans the `nodes` directory in the userDir to find local node files.
+ * The following property can be used to specify an additional directory to scan.
+ */
+ //nodesDir: '/home/nol/.node-red/nodes',
+
+/*******************************************************************************
+ * Security
+ * - adminAuth
+ * - https
+ * - httpsRefreshInterval
+ * - requireHttps
+ * - httpNodeAuth
+ * - httpStaticAuth
+ ******************************************************************************/
+
+ /** To password protect the Node-RED editor and admin API, the following
+ * property can be used. See http://nodered.org/docs/security.html for details.
+ */
+ //adminAuth: {
+ // type: "credentials",
+ // users: [{
+ // username: "admin",
+ // password: "$2a$08$zZWtXTja0fB1pzD4sHCMyOCMYz2Z6dNbM6tl8sJogENOMcxWV9DN.",
+ // permissions: "*"
+ // }]
+ //},
+
+ /** The following property can be used to enable HTTPS
+ * This property can be either an object, containing both a (private) key
+ * and a (public) certificate, or a function that returns such an object.
+ * See http://nodejs.org/api/https.html#https_https_createserver_options_requestlistener
+ * for details of its contents.
+ */
+
+ /** Option 1: static object */
+ //https: {
+ // key: require("fs").readFileSync('privkey.pem'),
+ // cert: require("fs").readFileSync('cert.pem')
+ //},
+
+ /** Option 2: function that returns the HTTP configuration object */
+ // https: function() {
+ // // This function should return the options object, or a Promise
+ // // that resolves to the options object
+ // return {
+ // key: require("fs").readFileSync('privkey.pem'),
+ // cert: require("fs").readFileSync('cert.pem')
+ // }
+ // },
+
+ /** If the `https` setting is a function, the following setting can be used
+ * to set how often, in hours, the function will be called. That can be used
+ * to refresh any certificates.
+ */
+ //httpsRefreshInterval : 12,
+
+ /** The following property can be used to cause insecure HTTP connections to
+ * be redirected to HTTPS.
+ */
+ //requireHttps: true,
+
+ /** To password protect the node-defined HTTP endpoints (httpNodeRoot),
+ * including node-red-dashboard, or the static content (httpStatic), the
+ * following properties can be used.
+ * The `pass` field is a bcrypt hash of the password.
+ * See http://nodered.org/docs/security.html#generating-the-password-hash
+ */
+ //httpNodeAuth: {user:"user",pass:"$2a$08$zZWtXTja0fB1pzD4sHCMyOCMYz2Z6dNbM6tl8sJogENOMcxWV9DN."},
+ //httpStaticAuth: {user:"user",pass:"$2a$08$zZWtXTja0fB1pzD4sHCMyOCMYz2Z6dNbM6tl8sJogENOMcxWV9DN."},
+
+/*******************************************************************************
+ * Server Settings
+ * - uiPort
+ * - uiHost
+ * - apiMaxLength
+ * - httpServerOptions
+ * - httpAdminRoot
+ * - httpAdminMiddleware
+ * - httpNodeRoot
+ * - httpNodeCors
+ * - httpNodeMiddleware
+ * - httpStatic
+ * - httpStaticRoot
+ ******************************************************************************/
+
+ /** the tcp port that the Node-RED web server is listening on */
+ uiPort: process.env.PORT || 1880,
+
+ /** By default, the Node-RED UI accepts connections on all IPv4 interfaces.
+ * To listen on all IPv6 addresses, set uiHost to "::",
+ * The following property can be used to listen on a specific interface. For
+ * example, the following would only allow connections from the local machine.
+ */
+ //uiHost: "127.0.0.1",
+
+ /** The maximum size of HTTP request that will be accepted by the runtime api.
+ * Default: 5mb
+ */
+ //apiMaxLength: '5mb',
+
+ /** The following property can be used to pass custom options to the Express.js
+ * server used by Node-RED. For a full list of available options, refer
+ * to http://expressjs.com/en/api.html#app.settings.table
+ */
+ //httpServerOptions: { },
+
+ /** By default, the Node-RED UI is available at http://localhost:1880/
+ * The following property can be used to specify a different root path.
+ * If set to false, this is disabled.
+ */
+ //httpAdminRoot: '/admin',
+
+ /** The following property can be used to add a custom middleware function
+ * in front of all admin http routes. For example, to set custom http
+ * headers. It can be a single function or an array of middleware functions.
+ */
+ // httpAdminMiddleware: function(req,res,next) {
+ // // Set the X-Frame-Options header to limit where the editor
+ // // can be embedded
+ // //res.set('X-Frame-Options', 'sameorigin');
+ // next();
+ // },
+
+
+ /** Some nodes, such as HTTP In, can be used to listen for incoming http requests.
+ * By default, these are served relative to '/'. The following property
+ * can be used to specifiy a different root path. If set to false, this is
+ * disabled.
+ */
+ //httpNodeRoot: '/red-nodes',
+
+ /** The following property can be used to configure cross-origin resource sharing
+ * in the HTTP nodes.
+ * See https://github.com/troygoode/node-cors#configuration-options for
+ * details on its contents. The following is a basic permissive set of options:
+ */
+ //httpNodeCors: {
+ // origin: "*",
+ // methods: "GET,PUT,POST,DELETE"
+ //},
+
+ /** If you need to set an http proxy please set an environment variable
+ * called http_proxy (or HTTP_PROXY) outside of Node-RED in the operating system.
+ * For example - http_proxy=http://myproxy.com:8080
+ * (Setting it here will have no effect)
+ * You may also specify no_proxy (or NO_PROXY) to supply a comma separated
+ * list of domains to not proxy, eg - no_proxy=.acme.co,.acme.co.uk
+ */
+
+ /** The following property can be used to add a custom middleware function
+ * in front of all http in nodes. This allows custom authentication to be
+ * applied to all http in nodes, or any other sort of common request processing.
+ * It can be a single function or an array of middleware functions.
+ */
+ //httpNodeMiddleware: function(req,res,next) {
+ // // Handle/reject the request, or pass it on to the http in node by calling next();
+ // // Optionally skip our rawBodyParser by setting this to true;
+ // //req.skipRawBodyParser = true;
+ // next();
+ //},
+
+ /** When httpAdminRoot is used to move the UI to a different root path, the
+ * following property can be used to identify a directory of static content
+ * that should be served at http://localhost:1880/.
+ * When httpStaticRoot is set differently to httpAdminRoot, there is no need
+ * to move httpAdminRoot
+ */
+ //httpStatic: '/home/nol/node-red-static/', //single static source
+ /* OR multiple static sources can be created using an array of objects... */
+ //httpStatic: [
+ // {path: '/home/nol/pics/', root: "/img/"},
+ // {path: '/home/nol/reports/', root: "/doc/"},
+ //],
+
+ /**
+ * All static routes will be appended to httpStaticRoot
+ * e.g. if httpStatic = "/home/nol/docs" and httpStaticRoot = "/static/"
+ * then "/home/nol/docs" will be served at "/static/"
+ * e.g. if httpStatic = [{path: '/home/nol/pics/', root: "/img/"}]
+ * and httpStaticRoot = "/static/"
+ * then "/home/nol/pics/" will be served at "/static/img/"
+ */
+ //httpStaticRoot: '/static/',
+
+/*******************************************************************************
+ * Runtime Settings
+ * - lang
+ * - runtimeState
+ * - diagnostics
+ * - logging
+ * - contextStorage
+ * - exportGlobalContextKeys
+ * - externalModules
+ ******************************************************************************/
+
+ /** Uncomment the following to run node-red in your preferred language.
+ * Available languages include: en-US (default), ja, de, zh-CN, zh-TW, ru, ko
+ * Some languages are more complete than others.
+ */
+ // lang: "de",
+
+ /** Configure diagnostics options
+ * - enabled: When `enabled` is `true` (or unset), diagnostics data will
+ * be available at http://localhost:1880/diagnostics
+ * - ui: When `ui` is `true` (or unset), the action `show-system-info` will
+ * be available to logged in users of node-red editor
+ */
+ diagnostics: {
+ /** enable or disable diagnostics endpoint. Must be set to `false` to disable */
+ enabled: true,
+ /** enable or disable diagnostics display in the node-red editor. Must be set to `false` to disable */
+ ui: true,
+ },
+ /** Configure runtimeState options
+ * - enabled: When `enabled` is `true` flows runtime can be Started/Stoped
+ * by POSTing to available at http://localhost:1880/flows/state
+ * - ui: When `ui` is `true`, the action `core:start-flows` and
+ * `core:stop-flows` will be available to logged in users of node-red editor
+ * Also, the deploy menu (when set to default) will show a stop or start button
+ */
+ runtimeState: {
+ /** enable or disable flows/state endpoint. Must be set to `false` to disable */
+ enabled: false,
+ /** show or hide runtime stop/start options in the node-red editor. Must be set to `false` to hide */
+ ui: false,
+ },
+ /** Configure the logging output */
+ logging: {
+ /** Only console logging is currently supported */
+ console: {
+ /** Level of logging to be recorded. Options are:
+ * fatal - only those errors which make the application unusable should be recorded
+ * error - record errors which are deemed fatal for a particular request + fatal errors
+ * warn - record problems which are non fatal + errors + fatal errors
+ * info - record information about the general running of the application + warn + error + fatal errors
+ * debug - record information which is more verbose than info + info + warn + error + fatal errors
+ * trace - record very detailed logging + debug + info + warn + error + fatal errors
+ * off - turn off all logging (doesn't affect metrics or audit)
+ */
+ level: "info",
+ /** Whether or not to include metric events in the log output */
+ metrics: false,
+ /** Whether or not to include audit events in the log output */
+ audit: false
+ }
+ },
+
+ /** Context Storage
+ * The following property can be used to enable context storage. The configuration
+ * provided here will enable file-based context that flushes to disk every 30 seconds.
+ * Refer to the documentation for further options: https://nodered.org/docs/api/context/
+ */
+ //contextStorage: {
+ // default: {
+ // module:"localfilesystem"
+ // },
+ //},
+
+ /** `global.keys()` returns a list of all properties set in global context.
+ * This allows them to be displayed in the Context Sidebar within the editor.
+ * In some circumstances it is not desirable to expose them to the editor. The
+ * following property can be used to hide any property set in `functionGlobalContext`
+ * from being list by `global.keys()`.
+ * By default, the property is set to false to avoid accidental exposure of
+ * their values. Setting this to true will cause the keys to be listed.
+ */
+ exportGlobalContextKeys: false,
+
+ /** Configure how the runtime will handle external npm modules.
+ * This covers:
+ * - whether the editor will allow new node modules to be installed
+ * - whether nodes, such as the Function node are allowed to have their
+ * own dynamically configured dependencies.
+ * The allow/denyList options can be used to limit what modules the runtime
+ * will install/load. It can use '*' as a wildcard that matches anything.
+ */
+ externalModules: {
+ // autoInstall: false, /** Whether the runtime will attempt to automatically install missing modules */
+ // autoInstallRetry: 30, /** Interval, in seconds, between reinstall attempts */
+ // palette: { /** Configuration for the Palette Manager */
+ // allowInstall: true, /** Enable the Palette Manager in the editor */
+ // allowUpdate: true, /** Allow modules to be updated in the Palette Manager */
+ // allowUpload: true, /** Allow module tgz files to be uploaded and installed */
+ // allowList: ['*'],
+ // denyList: [],
+ // allowUpdateList: ['*'],
+ // denyUpdateList: []
+ // },
+ // modules: { /** Configuration for node-specified modules */
+ // allowInstall: true,
+ // allowList: [],
+ // denyList: []
+ // }
+ },
+
+
+/*******************************************************************************
+ * Editor Settings
+ * - disableEditor
+ * - editorTheme
+ ******************************************************************************/
+
+ /** The following property can be used to disable the editor. The admin API
+ * is not affected by this option. To disable both the editor and the admin
+ * API, use either the httpRoot or httpAdminRoot properties
+ */
+ //disableEditor: false,
+
+ /** Customising the editor
+ * See https://nodered.org/docs/user-guide/runtime/configuration#editor-themes
+ * for all available options.
+ */
+ editorTheme: {
+ /** The following property can be used to set a custom theme for the editor.
+ * See https://github.com/node-red-contrib-themes/theme-collection for
+ * a collection of themes to chose from.
+ */
+ //theme: "",
+
+ /** To disable the 'Welcome to Node-RED' tour that is displayed the first
+ * time you access the editor for each release of Node-RED, set this to false
+ */
+ //tours: false,
+
+ palette: {
+ /** The following property can be used to order the categories in the editor
+ * palette. If a node's category is not in the list, the category will get
+ * added to the end of the palette.
+ * If not set, the following default order is used:
+ */
+ //categories: ['subflows', 'common', 'function', 'network', 'sequence', 'parser', 'storage'],
+ },
+
+ projects: {
+ /** To enable the Projects feature, set this value to true */
+ enabled: false,
+ workflow: {
+ /** Set the default projects workflow mode.
+ * - manual - you must manually commit changes
+ * - auto - changes are automatically committed
+ * This can be overridden per-user from the 'Git config'
+ * section of 'User Settings' within the editor
+ */
+ mode: "manual"
+ }
+ },
+
+ codeEditor: {
+ /** Select the text editor component used by the editor.
+ * As of Node-RED V3, this defaults to "monaco", but can be set to "ace" if desired
+ */
+ lib: "monaco",
+ options: {
+ /** The follow options only apply if the editor is set to "monaco"
+ *
+ * theme - must match the file name of a theme in
+ * packages/node_modules/@node-red/editor-client/src/vendor/monaco/dist/theme
+ * e.g. "tomorrow-night", "upstream-sunburst", "github", "my-theme"
+ */
+ // theme: "vs",
+ /** other overrides can be set e.g. fontSize, fontFamily, fontLigatures etc.
+ * for the full list, see https://microsoft.github.io/monaco-editor/api/interfaces/monaco.editor.IStandaloneEditorConstructionOptions.html
+ */
+ //fontSize: 14,
+ //fontFamily: "Cascadia Code, Fira Code, Consolas, 'Courier New', monospace",
+ //fontLigatures: true,
+ }
+ }
+ },
+
+/*******************************************************************************
+ * Node Settings
+ * - fileWorkingDirectory
+ * - functionGlobalContext
+ * - functionExternalModules
+ * - nodeMessageBufferMaxLength
+ * - ui (for use with Node-RED Dashboard)
+ * - debugUseColors
+ * - debugMaxLength
+ * - execMaxBufferSize
+ * - httpRequestTimeout
+ * - mqttReconnectTime
+ * - serialReconnectTime
+ * - socketReconnectTime
+ * - socketTimeout
+ * - tcpMsgQueueSize
+ * - inboundWebSocketTimeout
+ * - tlsConfigDisableLocalFiles
+ * - webSocketNodeVerifyClient
+ ******************************************************************************/
+
+ /** The working directory to handle relative file paths from within the File nodes
+ * defaults to the working directory of the Node-RED process.
+ */
+ //fileWorkingDirectory: "",
+
+ /** Allow the Function node to load additional npm modules directly */
+ functionExternalModules: true,
+
+ /** The following property can be used to set predefined values in Global Context.
+ * This allows extra node modules to be made available with in Function node.
+ * For example, the following:
+ * functionGlobalContext: { os:require('os') }
+ * will allow the `os` module to be accessed in a Function node using:
+ * global.get("os")
+ */
+ functionGlobalContext: {
+ os:require('os'),
+ },
+
+ /** The maximum number of messages nodes will buffer internally as part of their
+ * operation. This applies across a range of nodes that operate on message sequences.
+ * defaults to no limit. A value of 0 also means no limit is applied.
+ */
+ //nodeMessageBufferMaxLength: 0,
+
+ /** If you installed the optional node-red-dashboard you can set it's path
+ * relative to httpNodeRoot
+ * Other optional properties include
+ * readOnly:{boolean},
+ * middleware:{function or array}, (req,res,next) - http middleware
+ * ioMiddleware:{function or array}, (socket,next) - socket.io middleware
+ */
+ //ui: { path: "ui" },
+
+ /** Colourise the console output of the debug node */
+ //debugUseColors: true,
+
+ /** The maximum length, in characters, of any message sent to the debug sidebar tab */
+ debugMaxLength: 1000,
+
+ /** Maximum buffer size for the exec node. Defaults to 10Mb */
+ //execMaxBufferSize: 10000000,
+
+ /** Timeout in milliseconds for HTTP request connections. Defaults to 120s */
+ //httpRequestTimeout: 120000,
+
+ /** Retry time in milliseconds for MQTT connections */
+ mqttReconnectTime: 15000,
+
+ /** Retry time in milliseconds for Serial port connections */
+ serialReconnectTime: 15000,
+
+ /** Retry time in milliseconds for TCP socket connections */
+ //socketReconnectTime: 10000,
+
+ /** Timeout in milliseconds for TCP server socket connections. Defaults to no timeout */
+ //socketTimeout: 120000,
+
+ /** Maximum number of messages to wait in queue while attempting to connect to TCP socket
+ * defaults to 1000
+ */
+ //tcpMsgQueueSize: 2000,
+
+ /** Timeout in milliseconds for inbound WebSocket connections that do not
+ * match any configured node. Defaults to 5000
+ */
+ //inboundWebSocketTimeout: 5000,
+
+ /** To disable the option for using local files for storing keys and
+ * certificates in the TLS configuration node, set this to true.
+ */
+ //tlsConfigDisableLocalFiles: true,
+
+ /** The following property can be used to verify websocket connection attempts.
+ * This allows, for example, the HTTP request headers to be checked to ensure
+ * they include valid authentication information.
+ */
+ //webSocketNodeVerifyClient: function(info) {
+ // /** 'info' has three properties:
+ // * - origin : the value in the Origin header
+ // * - req : the HTTP request
+ // * - secure : true if req.connection.authorized or req.connection.encrypted is set
+ // *
+ // * The function should return true if the connection should be accepted, false otherwise.
+ // *
+ // * Alternatively, if this function is defined to accept a second argument, callback,
+ // * it can be used to verify the client asynchronously.
+ // * The callback takes three arguments:
+ // * - result : boolean, whether to accept the connection or not
+ // * - code : if result is false, the HTTP error status to return
+ // * - reason: if result is false, the HTTP reason string to return
+ // */
+ //},
+}