ONAP FTC job script to run when new patchset created

Issue-ID: NONRTRIC-1032
Signed-off-by: Raviteja Karumuri <raviteja.karumuri@est.tech>
Change-Id: I85af71febfbcc0d353db6581bf5b8119f2c1111a

diff --git a/test/auto-test/onap-suite-verify-jobs.sh b/test/auto-test/onap-suite-verify-jobs.sh
new file mode 100644 (file)
index 0000000..549b3cb
--- /dev/null
+++ b/test/auto-test/onap-suite-verify-jobs.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+
+#  ============LICENSE_START===============================================
+#  Copyright (C) 2024 OpenInfra Foundation Europe. All rights reserved.
+#  ========================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#  ============LICENSE_END=================================================
+#
+
+TS_ONELINE_DESCR="Test suite - This suite will cover the components(A1PMS) for the verify job"
+
+. ../common/testsuite_common.sh
+
+suite_setup
+
+############# TEST CASES #################
+
+./FTC10.sh $@
+
+##########################################
+
+suite_complete
+
+exit

diff --git a/test/auto-test/onap-verify-jobs.sh b/test/auto-test/onap-verify-jobs.sh
new file mode 100644 (file)
index 0000000..d5d0f9f
--- /dev/null
+++ b/test/auto-test/onap-verify-jobs.sh
@@ -0,0 +1,74 @@
+#!/bin/bash
+
+#  ============LICENSE_START===============================================
+#  Copyright (C) 2024 OpenInfra Foundation Europe. All rights reserved.
+#  ========================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#  ============LICENSE_END=================================================
+#
+
+TEST_DIRECTORY="test/auto-test"
+TEST_SCRIPT="./onap-suite-verify-jobs.sh"
+DOCKER_COMPOSE_VERSION="v2.21.0"
+PULL_IMAGE_TYPE="remote-remove"
+RUN_MODE="docker"
+IMAGE_VERSION="release"
+ENV_FLAG="--env-file"
+A1PMS_LOCAL_IMAGE_FLAG="--use-local-image"
+LOCAL_IMAGE_FLAG="A1PMS"
+DELETE_CONTAINERS_FLAG="--delete-containers"
+ENV_FILE="../common/onap_ftc_job_env.sh"
+
+# Check if jq is installed, and install it if not
+if ! command -v jq &> /dev/null; then
+    echo "Installing jq..."
+    sudo apt-get update
+    sudo apt-get install -y jq
+fi
+
+# Function to install Docker Compose version 2
+install_docker_compose() {
+    echo "Installing Docker Compose version 2..."
+    sudo curl -L "https://github.com/docker/compose/releases/download/"$DOCKER_COMPOSE_VERSION"/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
+    sudo chmod +x /usr/local/bin/docker-compose
+    sudo ln -s /usr/local/bin/docker-compose /usr/libexec/docker/cli-plugins/docker-compose
+}
+
+# Function to remove Docker Compose
+remove_docker_compose() {
+    echo "Removing Docker Compose..."
+    sudo rm /usr/local/bin/docker-compose
+}
+
+# Check if docker-compose is installed, and install it if not
+if ! command -v docker-compose &> /dev/null; then
+    install_docker_compose
+fi
+
+cd "$TEST_DIRECTORY"
+sudo chmod 775 "$TEST_SCRIPT"
+"$TEST_SCRIPT" $PULL_IMAGE_TYPE $RUN_MODE $IMAGE_VERSION $ENV_FLAG $ENV_FILE $A1PMS_LOCAL_IMAGE_FLAG $LOCAL_IMAGE_FLAG $DELETE_CONTAINERS_FLAG
+exit_val=$?
+
+# Remove docker-compose after tests are done
+if command -v docker-compose &> /dev/null; then
+    remove_docker_compose
+fi
+
+# Remove jq after tests are done
+if command -v jq &> /dev/null; then
+    echo "Removing jq..."
+    sudo apt-get remove -y jq
+fi
+
+exit $exit_val

diff --git a/test/common/onap_ftc_job_env.sh b/test/common/onap_ftc_job_env.sh
new file mode 100644 (file)
index 0000000..659f5c1
--- /dev/null
+++ b/test/common/onap_ftc_job_env.sh
@@ -0,0 +1,405 @@
+#!/bin/bash
+
+#  ============LICENSE_START===============================================
+#  Copyright (C) 2024 OpenInfra Foundation Europe. All rights reserved.
+#  ========================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#  ============LICENSE_END=================================================
+#
+#Profile for ONAP honolulu release
+TEST_ENV_PROFILE="ONAP-MONTREAL"
+FLAVOUR="ONAP"
+
+########################################
+## Nexus repo settings
+########################################
+
+# Nexus repos for developed images
+NEXUS_PROXY_REPO="nexus3.onap.org:10001/"
+NEXUS_RELEASE_REPO="nexus3.onap.org:10002/"
+NEXUS_SNAPSHOT_REPO="nexus3.onap.org:10003/"
+NEXUS_STAGING_REPO=$NEXUS_SNAPSHOT_REPO  #staging repo not used in ONAP, using snapshot
+
+# Nexus repos for images used by test (not developed by the project)
+NEXUS_RELEASE_REPO_ORAN="nexus3.o-ran-sc.org:10002/" # Only for released ORAN images
+NEXUS_RELEASE_REPO_ONAP=$NEXUS_RELEASE_REPO
+
+########################################
+# Set up of image and tags for the test.
+########################################
+
+# NOTE: One environment variable containing the image name and tag is create by the test script
+# for each image from the env variables below.
+# The variable is created by removing the suffix "_BASE" from the base image variable name.
+# Example: A1PMS_IMAGE_BASE -> A1PMS_IMAGE
+# This var will point to the local or remote image depending on cmd line arguments.
+# In addition, the repo and the image tag version are selected from the list of image tags based on the cmd line argument.
+# For images built by the script, only tag #1 shall be specified
+# For project images, only tag #1, #2, #3 and #4 shall be specified
+# For ORAN images (non project), only tag #5 shall be specified
+# For ONAP images (non project), only tag #6 shall be specified
+# For all other images, only tag #7 shall be specified
+# 1 XXX_LOCAL: local images: <image-name>:<local-tag>
+# 2 XXX_REMOTE_SNAPSHOT: snapshot images: <snapshot-nexus-repo><image-name>:<snapshot-tag>
+# 3 XXX_REMOTE: staging images: <staging-nexus-repo><image-name>:<staging-tag>
+# 4 XXX_REMOTE_RELEASE: release images: <release-nexus-repo><image-name>:<release-tag>
+# 5 XXX_REMOTE_RELEASE_ORAN: ORAN release images: <oran-release-nexus-repo><image-name>:<release-tag>
+# 6 XXX_REMOTE_RELEASE_ONAP: ONAP release images: <onap-release-nexus-repo><image-name>:<release-tag>
+# 7 XXX_PROXY: other images, not produced by the project: <proxy-nexus-repo><mage-name>:<proxy-tag>
+
+#############################################################################
+# Note:
+# The image tags for a1pms and sdnc are updated AFTER the release.
+# This means that the latest staging/snapshot images for these two components have
+# version one step (0.0.1 - bug-level) higher than the
+# latest release image version.
+
+# This is only applicable for ONAP images
+#############################################################################
+
+# A1PMS image and tags
+A1PMS_IMAGE_BASE="onap/ccsdk-oran-a1policymanagementservice"
+A1PMS_IMAGE_TAG_LOCAL="1.8.1-SNAPSHOT"
+A1PMS_IMAGE_TAG_REMOTE_SNAPSHOT="1.6.1-SNAPSHOT"
+A1PMS_IMAGE_TAG_REMOTE="1.6.1-STAGING-latest" #Will use snapshot repo
+A1PMS_IMAGE_TAG_REMOTE_RELEASE="1.6.1"
+
+# SDNC A1 Controller remote image and tag
+SDNC_A1_CONTROLLER_IMAGE_BASE="onap/sdnc-image"
+SDNC_A1_CONTROLLER_IMAGE_TAG_LOCAL="2.5.1-SNAPSHOT" ###CHECK THIS
+SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE_SNAPSHOT="2.5.1-STAGING-latest"
+SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE="2.5.1-STAGING-latest"  #Will use snapshot repo
+SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE_RELEASE="2.5.1"
+
+#SDNC DB remote image and tag
+#The DB is part of SDNC so handled in the same way as SDNC
+SDNC_DB_IMAGE_BASE="mariadb"
+SDNC_DB_IMAGE_TAG_REMOTE_PROXY="10.5"
+
+# ICS image and tag - using i release
+ICS_IMAGE_BASE="o-ran-sc/nonrtric-plt-informationcoordinatorservice"
+ICS_IMAGE_TAG_REMOTE_RELEASE_ORAN="1.6.0"
+#Note: Update var ICS_FEATURE_LEVEL if image version is changed
+
+# Control Panel image and tag - using i release
+CONTROL_PANEL_IMAGE_BASE="o-ran-sc/nonrtric-controlpanel"
+CONTROL_PANEL_IMAGE_TAG_REMOTE_RELEASE_ORAN="2.5.0"
+
+# Gateway image and tags - used i release
+NRT_GATEWAY_IMAGE_BASE="o-ran-sc/nonrtric-gateway"
+NRT_GATEWAY_IMAGE_TAG_REMOTE_RELEASE_ORAN="1.2.0"
+
+# RAPP Catalogue image and tags - used i release
+RAPP_CAT_IMAGE_BASE="o-ran-sc/nonrtric-plt-rappcatalogue"
+RAPP_CAT_IMAGE_TAG_REMOTE_RELEASE_ORAN="1.2.0"
+
+
+# Near RT RIC Simulator image and tags - used i release
+RIC_SIM_IMAGE_BASE="o-ran-sc/a1-simulator"
+RIC_SIM_IMAGE_TAG_REMOTE_RELEASE_ORAN="2.6.1"
+
+#MR stub image and tag
+MRSTUB_IMAGE_BASE="mrstub"
+MRSTUB_IMAGE_TAG_LOCAL="latest"
+#No remote image for MR stub, local image always used
+
+
+#Callback receiver image and tag
+CR_IMAGE_BASE="callback-receiver"
+CR_IMAGE_TAG_LOCAL="latest"
+#No remote image for CR, local image always used
+
+
+#Producer stub image and tag
+PROD_STUB_IMAGE_BASE="producer-stub"
+PROD_STUB_IMAGE_TAG_LOCAL="latest"
+#No remote image for producer stub, local image always used
+
+
+#Http proxy remote image and tag
+HTTP_PROXY_IMAGE_BASE="nodejs-http-proxy"
+HTTP_PROXY_IMAGE_TAG_LOCAL="latest"
+#No local image for http proxy, remote image always used
+
+#ONAP Zookeeper remote image and tag
+ONAP_ZOOKEEPER_IMAGE_BASE="onap/dmaap/zookeeper"
+ONAP_ZOOKEEPER_IMAGE_TAG_REMOTE_RELEASE_ONAP="6.1.0"
+#No local image for ONAP Zookeeper, remote image always used
+
+#ONAP Kafka remote image and tag
+ONAP_KAFKA_IMAGE_BASE="onap/dmaap/kafka111"
+ONAP_KAFKA_IMAGE_TAG_REMOTE_RELEASE_ONAP="1.1.1"
+#No local image for ONAP Kafka, remote image always used
+
+#ONAP DMAAP-MR remote image and tag
+ONAP_DMAAPMR_IMAGE_BASE="onap/dmaap/dmaap-mr"
+ONAP_DMAAPMR_IMAGE_TAG_REMOTE_RELEASE_ONAP="1.3.0"
+#No local image for ONAP DMAAP-MR, remote image always used
+
+#Kube proxy remote image and tag
+KUBE_PROXY_IMAGE_BASE="nodejs-kube-proxy"
+KUBE_PROXY_IMAGE_TAG_LOCAL="latest"
+#No remote image for kube proxy, local image always used
+
+#Kube proxy remote image and tag
+PVC_CLEANER_IMAGE_BASE="ubuntu"
+PVC_CLEANER_IMAGE_TAG_REMOTE_PROXY="20.10"
+#No local image for pvc cleaner, remote image always used
+
+# List of app short names produced by the project
+PROJECT_IMAGES_APP_NAMES="A1PMS SDNC"
+
+# List of app short names which images pulled from ORAN
+ORAN_IMAGES_APP_NAMES="CP ICS RICSIM RC NGW"
+
+# List of app short names which images pulled from ONAP
+ONAP_IMAGES_APP_NAMES=""   # Not used
+
+
+########################################
+# Detailed settings per app
+########################################
+
+
+DOCKER_SIM_NWNAME="nonrtric-docker-net"                  # Name of docker private network
+
+KUBE_NONRTRIC_NAMESPACE="nonrtric"                       # Namespace for all nonrtric components
+KUBE_SIM_NAMESPACE="nonrtric-ft"                         # Namespace for simulators (except MR and RICSIM)
+KUBE_A1SIM_NAMESPACE="a1-sim"                            # Namespace for a1-p simulators (RICSIM)
+KUBE_ONAP_NAMESPACE="onap"                               # Namespace for onap (only message router)
+KUBE_SDNC_NAMESPACE="onap"                               # Namespace for sdnc
+
+A1PMS_EXTERNAL_PORT=8081                                   # A1PMS container external port (host -> container)
+A1PMS_INTERNAL_PORT=8081                                   # A1PMS container internal port (container -> container)
+A1PMS_EXTERNAL_SECURE_PORT=8433                            # A1PMS container external secure port (host -> container)
+A1PMS_INTERNAL_SECURE_PORT=8433                            # A1PMS container internal secure port (container -> container)
+A1PMS_APIS="V1 V2"                                         # Supported northbound api versions
+A1PMS_VERSION="V2"                                         # Tested version of northbound API
+# A1PMS_V3="V3"                                            # To be used this property in further env releases
+A1PMS_API_PREFIX="/a1-policy"                              # api url prefix, only for V2. Shall contain leading "/"
+# A1PMS_API_PREFIX_V3="/a1policymanagement"                # To be used this property in further env releases
+# A1PMS_V3_FLAG="true"                                       # To be used this property in further env releases
+
+A1PMS_APP_NAME="policymanagementservice"                   # Name for A1PMS container
+A1PMS_DISPLAY_NAME="Policy Management Service"
+A1PMS_HOST_MNT_DIR="./mnt"                                 # Mounted dir, relative to compose file, on the host
+A1PMS_LOGPATH="/var/log/policy-agent/application.log"      # Path the application log in the A1PMS container
+A1PMS_APP_NAME_ALIAS="policy-agent-container"              # Alias name, name used by the control panel
+A1PMS_CONFIG_KEY="policy-agent"                            # Key for consul config
+A1PMS_PKG_NAME="org.onap.ccsdk.oran.a1policymanagementservice"  # Java base package name
+A1PMS_ACTUATOR="/actuator/loggers/$A1PMS_PKG_NAME"           # Url for trace/debug
+A1PMS_ALIVE_URL="$A1PMS_API_PREFIX/v2/status"                # Base path for alive check
+# A1PMS_ALIVE_URL_V3=/v1/status                            # To be used this property in further env releases
+A1PMS_COMPOSE_DIR="a1pms"                                    # Dir in simulator_group for docker-compose
+A1PMS_CONFIG_MOUNT_PATH="/opt/app/policy-agent/config"     # Path in container for config file
+A1PMS_DATA_MOUNT_PATH="/opt/app/policy-agent/data"         # Path in container for data file
+A1PMS_CONFIG_FILE="application.yaml"                       # Container config file name
+A1PMS_DATA_FILE="application_configuration.json"           # Container data file name
+A1PMS_CONTAINER_MNT_DIR="/var/policy-management-service"   # Mounted dir in the container
+A1PMS_FEATURE_LEVEL="NO-DMAAP ADAPTER-CLASS"               # Space separated list of features
+A1PMS_ADAPTER_CLASS=""                                     # Class name set by override file
+A1PMS_ADAPTER_POLICY_NAME=""                               # Policy name set by override file
+
+ICS_APP_NAME="informationservice"                        # Name for ICS container
+ICS_DISPLAY_NAME="Enrichment Coordinator Service"        # Display name for ICS container
+ICS_EXTERNAL_PORT=8083                                   # ICS container external port (host -> container)
+ICS_INTERNAL_PORT=8083                                   # ICS container internal port (container -> container)
+ICS_EXTERNAL_SECURE_PORT=8434                            # ICS container external secure port (host -> container)
+ICS_INTERNAL_SECURE_PORT=8434                            # ICS container internal secure port (container -> container)
+
+ICS_LOGPATH="/var/log/information-coordinator-service/application.log" # Path the application log in the ICS container
+ICS_APP_NAME_ALIAS="information-service-container"       # Alias name, name used by the control panel
+ICS_HOST_MNT_DIR="./mnt"                                 # Mounted dir, relative to compose file, on the host
+ICS_CONTAINER_MNT_DIR="/var/information-coordinator-service" # Mounted dir in the container
+ICS_ACTUATOR="/actuator/loggers/org.oransc.ics"          # Url for trace/debug
+ICS_CERT_MOUNT_DIR="./cert"
+ICS_ALIVE_URL="/status"                                  # Base path for alive check
+ICS_COMPOSE_DIR="ics"                                    # Dir in simulator_group for docker-compose
+ICS_CONFIG_MOUNT_PATH=/opt/app/information-coordinator-service/config # Internal container path for configuration
+ICS_CONFIG_FILE=application.yaml                         # Config file name
+ICS_FEATURE_LEVEL=""                                     # Space separated list of features
+
+MR_DMAAP_APP_NAME="message-router"                       # Name for the Dmaap MR
+MR_STUB_APP_NAME="mr-stub"                               # Name of the MR stub
+MR_DMAAP_DISPLAY_NAME="DMAAP Message Router"
+MR_STUB_DISPLAY_NAME="Message Router stub"
+MR_STUB_CERT_MOUNT_DIR="./cert"
+MR_EXTERNAL_PORT=3904                                    # MR dmaap/stub container external port
+MR_INTERNAL_PORT=3904                                    # MR dmaap/stub container internal port
+MR_EXTERNAL_SECURE_PORT=3905                             # MR dmaap/stub container external secure port
+MR_INTERNAL_SECURE_PORT=3905                             # MR dmaap/stub container internal secure port
+MR_DMAAP_LOCALHOST_PORT=3904                             # MR stub container external port (host -> container)
+MR_STUB_LOCALHOST_PORT=3908                              # MR stub container external port (host -> container)
+MR_DMAAP_LOCALHOST_SECURE_PORT=3905                      # MR stub container internal port (container -> container)
+MR_STUB_LOCALHOST_SECURE_PORT=3909                       # MR stub container external secure port (host -> container)
+MR_READ_TOPIC="A1-POLICY-AGENT-READ"                     # Read topic
+MR_WRITE_TOPIC="A1-POLICY-AGENT-WRITE"                   # Write topic
+MR_READ_URL="/events/$MR_READ_TOPIC/users/policy-agent?timeout=15000&limit=100" # Path to read messages from MR
+MR_WRITE_URL="/events/$MR_WRITE_TOPIC"                   # Path to write messages to MR
+MR_STUB_ALIVE_URL="/"                                    # Base path for mr stub alive check
+MR_DMAAP_ALIVE_URL="/topics"                             # Base path for dmaap-mr alive check
+MR_DMAAP_COMPOSE_DIR="dmaapmr"                           # Dir in simulator_group for dmaap mr for - docker-compose
+MR_STUB_COMPOSE_DIR="mrstub"                             # Dir in simulator_group for mr stub for - docker-compose
+MR_KAFKA_APP_NAME="message-router-kafka"                 # Kafka app name, if just named "kafka" the image will not start...
+MR_KAFKA_PORT=9092                                       # Kafka port number
+MR_KAFKA_DOCKER_LOCALHOST_PORT=30098                     # Kafka port number for docker localhost
+MR_KAFKA_KUBE_NODE_PORT=30099                            # Kafka node port number for kube
+MR_ZOOKEEPER_APP_NAME="zookeeper"                        # Zookeeper app name
+MR_ZOOKEEPER_PORT="2181"                                 # Zookeeper port number
+MR_DMAAP_HOST_MNT_DIR="/mnt"                             # Basedir localhost for mounted files
+MR_DMAAP_HOST_CONFIG_DIR="/configs1"                      # Config files dir on localhost
+
+CR_APP_NAME="callback-receiver"                          # Name for the Callback receiver
+CR_DISPLAY_NAME="Callback Reciever"
+CR_EXTERNAL_PORT=8090                                    # Callback receiver container external port (host -> container)
+CR_INTERNAL_PORT=8090                                    # Callback receiver container internal port (container -> container)
+CR_EXTERNAL_SECURE_PORT=8091                             # Callback receiver container external secure port (host -> container)
+CR_INTERNAL_SECURE_PORT=8091                             # Callback receiver container internal secure port (container -> container)
+CR_APP_NAME="callback-receiver"                          # Name for the Callback receiver
+CR_APP_CALLBACK="/callbacks"                             # Url for callbacks
+CR_APP_CALLBACK_MR="/callbacks-mr"                       # Url for callbacks (data from mr which contains string encoded jsons in a json arr)
+CR_APP_CALLBACK_TEXT="/callbacks-text"                   # Url for callbacks (data containing text data)
+CR_ALIVE_URL="/reset"                                    # Base path for alive check
+CR_COMPOSE_DIR="cr"                                      # Dir in simulator_group for docker-compose
+
+PROD_STUB_APP_NAME="producer-stub"                       # Name for the Producer stub
+PROD_STUB_DISPLAY_NAME="Producer Stub"
+PROD_STUB_EXTERNAL_PORT=8092                             # Producer stub container external port (host -> container)
+PROD_STUB_INTERNAL_PORT=8092                             # Producer stub container internal port (container -> container)
+PROD_STUB_EXTERNAL_SECURE_PORT=8093                      # Producer stub container external secure port (host -> container)
+PROD_STUB_INTERNAL_SECURE_PORT=8093                      # Producer stub container internal secure port (container -> container)
+PROD_STUB_JOB_CALLBACK="/callbacks/job"                  # Callback path for job create/update/delete
+PROD_STUB_SUPERVISION_CALLBACK="/callbacks/supervision"  # Callback path for producer supervision
+PROD_STUB_ALIVE_URL="/"                                  # Base path for alive check
+PROD_STUB_COMPOSE_DIR="prodstub"                         # Dir in simulator_group for docker-compose
+
+RIC_SIM_DISPLAY_NAME="Near-RT RIC A1 Simulator"
+RIC_SIM_BASE="g"                                         # Base name of the RIC Simulator container, shall be the group code
+                                                         # Note, a prefix is added to each container name by the .env file in the 'ric' dir
+RIC_SIM_PREFIX="ricsim"                                  # Prefix added to ric container name, added in the .env file in the 'ric' dir
+                                                         # This prefix can be changed from the command line
+RIC_SIM_INTERNAL_PORT=8085                               # RIC Simulator container internal port (container -> container).
+                                                         # (external ports allocated by docker)
+RIC_SIM_INTERNAL_SECURE_PORT=8185                        # RIC Simulator container internal secure port (container -> container).
+                                                         # (external ports allocated by docker)
+RIC_SIM_CERT_MOUNT_DIR="./cert"
+RIC_SIM_COMPOSE_DIR="ric"                                # Dir in simulator group for docker compose
+RIC_SIM_ALIVE_URL="/"
+RIC_SIM_COMMON_SVC_NAME=""                               # Name of svc if one common svc is used for all ric sim groups (stateful sets)
+
+SDNC_APP_NAME="a1controller"                             # Name of the SNDC A1 Controller container
+SDNC_DISPLAY_NAME="SDNC A1 Controller"
+SDNC_EXTERNAL_PORT=8282                                  # SNDC A1 Controller container external port (host -> container)
+SDNC_INTERNAL_PORT=8181                                  # SNDC A1 Controller container internal port (container -> container)
+SDNC_EXTERNAL_SECURE_PORT=8443                           # SNDC A1 Controller container external secure port (host -> container)
+SDNC_INTERNAL_SECURE_PORT=8443                           # SNDC A1 Controller container internal secure port (container -> container)
+SDNC_DB_APP_NAME="sdncdb"                                # Name of the SDNC DB container
+SDNC_A1_TRUSTSTORE_PASSWORD="a1adapter"                  # SDNC truststore password
+SDNC_USER="admin"                                        # SDNC username
+SDNC_PWD="admin"                                         # SNDC PWD
+SDNC_PWD="Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U"   # SNDC PWD
+SDNC_API_URL="/rests/operations/A1-ADAPTER-API:"         # Base url path for SNDC API (for upgraded sdnc)
+#SDNC_API_URL="/restconf/operations/A1-ADAPTER-API:"      # Base url path for SNDC API
+SDNC_ALIVE_URL="/apidoc/explorer/index.html"             # Base url path for SNDC API docs (for alive check)
+SDNC_COMPOSE_DIR="sdnc"
+SDNC_COMPOSE_FILE="docker-compose-2.yml"
+SDNC_KUBE_APP_FILE="app2.yaml"
+SDNC_KARAF_LOG="/opt/opendaylight/data/log/karaf.log"    # Path to karaf log
+SDNC_RESPONSE_JSON_KEY="A1-ADAPTER-API:output"           # Key name for output json in replies from sdnc (for upgraded sdnc)
+#SDNC_RESPONSE_JSON_KEY="output"                          # Key name for output json in replies from sdnc
+SDNC_FEATURE_LEVEL="TRANS_RESP_CODE NO_NB_HTTPS"         # Space separated list of features
+                                                         # TRANS_RESP_CODE: SDNC return southbound response code
+
+RAPP_CAT_APP_NAME="rappcatalogueservice"                 # Name for the RAPP Catalogue
+RAPP_CAT_DISPLAY_NAME="RAPP Catalogue Service"
+RAPP_CAT_EXTERNAL_PORT=8680                              # RAPP Catalogue container external port (host -> container)
+RAPP_CAT_INTERNAL_PORT=8680                              # RAPP Catalogue container internal port (container -> container)
+RAPP_CAT_EXTERNAL_SECURE_PORT=8633                       # RAPP Catalogue container external secure port (host -> container)
+RAPP_CAT_INTERNAL_SECURE_PORT=8633                       # RAPP Catalogue container internal secure port (container -> container)
+RAPP_CAT_ALIVE_URL="/services"                           # Base path for alive check
+RAPP_CAT_COMPOSE_DIR="rapp_catalogue"                    # Dir in simulator_group for docker-compose
+
+CONTROL_PANEL_APP_NAME="controlpanel"                    # Name of the Control Panel container
+CONTROL_PANEL_DISPLAY_NAME="Non-RT RIC Control Panel"
+CONTROL_PANEL_EXTERNAL_PORT=8080                         # Control Panel container external port (host -> container)
+CONTROL_PANEL_INTERNAL_PORT=8080                         # Control Panel container internal port (container -> container)
+CONTROL_PANEL_EXTERNAL_SECURE_PORT=8880                  # Control Panel container external port (host -> container)
+CONTROL_PANEL_INTERNAL_SECURE_PORT=8082                  # Control Panel container internal port (container -> container)
+CONTROL_PANEL_LOGPATH="/logs/nonrtric-controlpanel.log"  # Path the application log in the Control Panel container
+CONTROL_PANEL_ALIVE_URL="/"                              # Base path for alive check
+CONTROL_PANEL_COMPOSE_DIR="control_panel"                # Dir in simulator_group for docker-compose
+CONTROL_PANEL_CONFIG_MOUNT_PATH=/maven                   # Container internal path for config
+CONTROL_PANEL_CONFIG_FILE=application.properties         # Config file name
+CONTROL_PANEL_HOST_MNT_DIR="./mnt"                       # Mounted dir, relative to compose file, on the host
+
+NRT_GATEWAY_APP_NAME="nonrtricgateway"                   # Name of the Gateway container
+NRT_GATEWAY_DISPLAY_NAME="NonRT-RIC Gateway"
+NRT_GATEWAY_EXTERNAL_PORT=9090                           # Gateway container external port (host -> container)
+NRT_GATEWAY_INTERNAL_PORT=9090                           # Gateway container internal port (container -> container)
+NRT_GATEWAY_EXTERNAL_SECURE_PORT=9091                    # Gateway container external port (host -> container)
+NRT_GATEWAY_INTERNAL_SECURE_PORT=9091                    # Gateway container internal port (container -> container)
+NRT_GATEWAY_LOGPATH="/var/log/nonrtric-gateway/application.log" # Path the application log in the Gateway container
+NRT_GATEWAY_HOST_MNT_DIR="./mnt"                         # Mounted dir, relative to compose file, on the host
+NRT_GATEWAY_ALIVE_URL="/actuator/metrics"                # Base path for alive check
+NRT_GATEWAY_COMPOSE_DIR="ngw"                            # Dir in simulator_group for docker-compose
+NRT_GATEWAY_CONFIG_MOUNT_PATH=/opt/app/nonrtric-gateway/config  # Container internal path for config
+NRT_GATEWAY_CONFIG_FILE=application.yaml                 # Config file name
+NRT_GATEWAY_PKG_NAME="org.springframework.cloud.gateway" # Java base package name
+NRT_GATEWAY_ACTUATOR="/actuator/loggers/$NRT_GATEWAY_PKG_NAME" # Url for trace/debug
+
+HTTP_PROXY_APP_NAME="httpproxy"                          # Name of the Http Proxy container
+HTTP_PROXY_DISPLAY_NAME="Http Proxy"
+HTTP_PROXY_EXTERNAL_PORT=8740                            # Http Proxy container external port (host -> container)
+HTTP_PROXY_INTERNAL_PORT=8080                            # Http Proxy container internal port (container -> container)
+HTTP_PROXY_EXTERNAL_SECURE_PORT=8742                     # Http Proxy container external secure port (host -> container)
+HTTP_PROXY_INTERNAL_SECURE_PORT=8433                     # Http Proxy container internal secure port (container -> container)
+HTTP_PROXY_WEB_EXTERNAL_PORT=8741                        # Http Proxy container external port (host -> container)
+HTTP_PROXY_WEB_INTERNAL_PORT=8081                        # Http Proxy container internal port (container -> container)
+HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT=8743                 # Http Proxy container external secure port (host -> container)
+HTTP_PROXY_WEB_INTERNAL_SECURE_PORT=8434                 # Http Proxy container internal secure port (container -> container
+HTTP_PROXY_CONFIG_PORT=0                                 # Port number for proxy config, will be set if proxy is started
+HTTP_PROXY_CONFIG_HOST_NAME=""                           # Proxy host, will be set if proxy is started
+HTTP_PROXY_ALIVE_URL="/"                                 # Base path for alive check
+HTTP_PROXY_COMPOSE_DIR="httpproxy"                       # Dir in simulator_group for docker-compose
+HTTP_PROXY_BUILD_DIR="http-https-proxy"                  # Dir in simulator_group for image build - note, reuses source from kubeproxy
+
+KUBE_PROXY_APP_NAME="kubeproxy"                          # Name of the Kube Http Proxy container
+KUBE_PROXY_DISPLAY_NAME="Kube Http Proxy"
+KUBE_PROXY_EXTERNAL_PORT=8730                            # Kube Http Proxy container external port (host -> container)
+KUBE_PROXY_INTERNAL_PORT=8080                            # Kube Http Proxy container internal port (container -> container)
+KUBE_PROXY_EXTERNAL_SECURE_PORT=8782                     # Kube Proxy container external secure port (host -> container)
+KUBE_PROXY_INTERNAL_SECURE_PORT=8433                     # Kube Proxy container internal secure port (container -> container)
+KUBE_PROXY_WEB_EXTERNAL_PORT=8731                        # Kube Http Proxy container external port (host -> container)
+KUBE_PROXY_WEB_INTERNAL_PORT=8081                        # Kube Http Proxy container internal port (container -> container)
+KUBE_PROXY_WEB_EXTERNAL_SECURE_PORT=8783                 # Kube Proxy container external secure port (host -> container)
+KUBE_PROXY_WEB_INTERNAL_SECURE_PORT=8434                 # Kube Proxy container internal secure port (container -> container
+
+KUBE_PROXY_DOCKER_EXTERNAL_PORT=8732                     # Kube Http Proxy container external port, docker (host -> container)
+KUBE_PROXY_DOCKER_EXTERNAL_SECURE_PORT=8784              # Kube Proxy container external secure port, docker (host -> container)
+KUBE_PROXY_WEB_DOCKER_EXTERNAL_PORT=8733                 # Kube Http Proxy container external port, docker (host -> container)
+KUBE_PROXY_WEB_DOCKER_EXTERNAL_SECURE_PORT=8785          # Kube Proxy container external secure port, docker (host -> container)
+
+KUBE_PROXY_PATH=""                                       # Proxy url path, will be set if proxy is started
+KUBE_PROXY_ALIVE_URL="/"                                 # Base path for alive check
+KUBE_PROXY_COMPOSE_DIR="kubeproxy"                       # Dir in simulator_group for docker-compose
+
+PVC_CLEANER_APP_NAME="pvc-cleaner"                      # Name for Persistent Volume Cleaner container
+PVC_CLEANER_DISPLAY_NAME="Persistent Volume Cleaner"    # Display name for Persistent Volume Cleaner
+PVC_CLEANER_COMPOSE_DIR="pvc-cleaner"                   # Dir in simulator_group for yamls
+
+########################################
+# Setting for common curl-base function
+########################################
+
+UUID=""                                                  # UUID used as prefix to the policy id to simulate a real UUID
+                                                         # Testscript need to set the UUID to use other this empty prefix is used

diff --git a/test/simulator-group/a1pms/application.yaml b/test/simulator-group/a1pms/application.yaml
index a3530b7..4667a4e 100644 (file)
--- a/test/simulator-group/a1pms/application.yaml
+++ b/test/simulator-group/a1pms/application.yaml
@@ -21,6 +21,24 @@ spring:
     allow-bean-definition-overriding: true
   aop:
     auto: false
+  application:
+    name: a1-pms
+  flyway:
+    # Configuration of the postgres database to be used for database migration.
+    # This is where the flyway maintains the information about the sql files loaded.
+    # These values can be passed via configmap/secret/env variable based on the installation.
+    # By default, Flyway uses location classpath:db/migration to load the sql files.
+    # This can be overridden using "flyway.locations" to have a different location.
+    baseline-on-migrate: true
+    url: "jdbc:postgresql://127.0.0.1:5432/a1pms"
+    user: a1pms
+    password: mypwd
+  r2dbc:
+    # Configuration of the postgres database to be used by the application.
+    # These values can be passed via configmap/secret/env variable based on the installation.
+    url: "r2dbc:postgresql://127.0.0.1:5432/a1pms"
+    username: a1pms
+    password: mypwd
 management:
   endpoints:
     web:
@@ -28,6 +46,24 @@ management:
         # Enabling of springboot actuator features. See springboot documentation.
         include: "loggers,logfile,health,info,metrics,threaddump,heapdump"
 
+otel:
+  exporter:
+    otlp:
+      traces:
+        endpoint: ${ONAP_OTEL_EXPORTER_ENDPOINT:http://jaeger:4317}
+        protocol: ${ONAP_OTEL_EXPORTER_PROTOCOL:grpc}
+  logs:
+    exporter: none
+  metrics:
+    exporter: none
+  sdk:
+    disabled: ${ONAP_SDK_DISABLED:true}
+    south: ${ONAP_TRACING_SOUTHBOUND:true}
+  tracing:
+    sampler:
+      jaeger_remote:
+        endpoint: ${ONAP_OTEL_SAMPLER_JAEGER_REMOTE_ENDPOINT:http://jaeger:14250}
+
 logging:
   # Configuration of logging
   level:
@@ -57,6 +93,10 @@ app:
   vardata-directory: /var/policy-management-service
   # path to json schema for config validation
   config-file-schema-path: /application_configuration_schema.json
+  # Postgres database usage is enabled using the below parameter.
+  # If this is enabled, the application will use postgres database for storage.
+  # This overrides the s3(s3.bucket) or file store(vardata-directory) configuration if enabled.
+  database-enabled: false
   webclient:
     # Configuration of the trust store used for the HTTP client (outgoing requests)
     # The file location and the password for the truststore is only relevant if trust-store-used == true