--- /dev/null
+#!/bin/bash
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# Copyright (c) 2019 Nokia. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+
+
+while [ -n "$1" ]; do # while loop starts
+
+ case "$1" in
+
+ -n)
+ CHART_NAME=$2
+ shift
+ ;;
+
+ -v) CHART_VERSION=$2
+ shift
+ ;; # Message for -b option
+
+ -f) OVERRIDEYAML=$2
+ shift
+ ;; # Message for -c option
+
+ -i) FULLIMAGE=$2
+ shift
+ ;;
+
+ -d) DESCRIPTOR_PATH=$2
+ shift
+ ;;
+
+ -c) CONFIG_JSON_PATH=$2
+ shift
+ ;;
+
+ -h) HELM_REPO_USERNAME=$2
+ shift
+ ;;
+
+ -p) HELM_REPO_PASSWORD=$2
+ shift
+ ;;
+
+ *) echo "Option $1 not recognized" ;; # In case you typed a different option other than a,b,c
+
+ esac
+
+ shift
+
+done
+
+
+
+
+if [ -z $CHART_NAME ]; then
+ echo "Please specify chart name using -n option."
+ exit 1
+fi
+if [ -z $CHART_VERSION ]; then
+ echo "Please specify chart version using -v option."
+ exit 1
+fi
+if [ -z $FULLIMAGE ]; then
+ echo "Please specify image using -i option."
+ exit 1
+fi
+if [ -z $DESCRIPTOR_PATH ]; then
+ echo "Please specify descriptor file using -d option."
+ exit 1
+fi
+if [ -z $CONFIG_JSON_PATH ]; then
+ echo "Please specify config json file using -c option."
+ exit 1
+fi
+
+
+if [ ! -f $DESCRIPTOR_PATH ]; then
+ echo "Descriptor file cannot be founded at $DESCRIPTOR_PATH"
+ exit 1
+fi
+if [ ! -f $CONFIG_JSON_PATH ]; then
+ echo "Config json file cannot be founded at $CONFIG_JSON_PATH"
+ exit 1
+fi
+
+
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null && pwd )"
+
+
+source $DIR/../etc/xapp.conf
+
+if [ -z $OVERRIDEYAML ]; then
+ HELM_REPO=$default_helm_repo
+ DOCKER_REGISTRY=$default_docker_registry
+else
+ helm_repo_override=$(grep "^ *helmRepository:" $OVERRIDEYAML | awk '{gsub(/ /,""); gsub(/\"/,""); split($0, b, "tory:");split(b[2],c,"#"); print c[1]}')
+ docker_reg_override=$(grep "^ *repository:" $OVERRIDEYAML | awk '{ gsub(/ /,""); gsub(/\"/,""); split($0, b, "tory:");split(b[2],c,"#"); print c[1]}')
+ if [ -z $helm_repo_override ]; then
+ HELM_REPO=$default_helm_repo
+ else
+ HELM_REPO=$helm_repo_override
+ fi
+
+ if [ -z $docker_reg_override ]; then
+ DOCKER_REGISTRY=$default_docker_registry
+ else
+ DOCKER_REGISTRY=$docker_reg_override
+ fi
+fi
+
+
+
+
+rm -rf /tmp/$CHART_NAME
+
+cp -r $DIR/../helm/xapp-std/ /tmp/$CHART_NAME
+
+
+
+sed -i "s/^name: xapp-std/name: $CHART_NAME/" /tmp/$CHART_NAME/Chart.yaml
+sed -i "s/^version: 0.0.1/version: $CHART_VERSION/" /tmp/$CHART_NAME/Chart.yaml
+
+
+registry_path=$(echo $FULLIMAGE | awk '{n=split($0, a, "/"); if(n>1) print a[1]}')
+
+
+
+tag=$(echo $FULLIMAGE | awk '{n=split($0, a, "/"); split(a[n], b, ":"); print b[2]}')
+
+image=$(echo $FULLIMAGE | awk -v head="$registry_path/" -v tail=":$tag" '{gsub (head, ""); gsub(tail,""); gsub(/\//,"\\/"); print $0}')
+
+
+sed -i "s/^ name: xapp-std/ name: $CHART_NAME/" /tmp/$CHART_NAME/values.yaml
+sed -i "s/^ name: xapp-std/ name: $image/" /tmp/$CHART_NAME/values.yaml
+sed -i "s/^ tag: latest/ tag: $tag/" /tmp/$CHART_NAME/values.yaml
+
+
+if [ -z $registry_path ]; then
+ sed -i "s/^ repository: xapp-std-reg/ repository: $DOCKER_REGISTRY/" /tmp/$CHART_NAME/values.yaml
+else
+ sed -i "s/^ repository: xapp-std-reg/ repository: $registry_path/" /tmp/$CHART_NAME/values.yaml
+fi
+
+
+
+
+cp $CONFIG_JSON_PATH /tmp/$CHART_NAME/config/
+cp $DESCRIPTOR_PATH /tmp/$CHART_NAME/descriptors/
+
+
+helm package -d /tmp /tmp/$CHART_NAME
+
+
+echo $HELM_REPO
+curl -k -u $HELM_REPO_USERNAME:$HELM_REPO_PASSWORD $HELM_REPO --upload-file /tmp/$CHART_NAME-$CHART_VERSION.tgz -v
+
+
# See the License for the specific language governing permissions and #
# limitations under the License. #
################################################################################
-apiVersion: v1
-kind: Secret
-metadata:
- name: {{ .Release.Name }}-appsecret
-type: Opaque
-stringData:
- {{- with .Values.ricapp.appsecret }}
- {{- toYaml . | nindent 2 }}
- {{- end }}
+
+default_helm_repo=https://helm-entry
+
+default_docker_registry=docker-entry
+
+++ /dev/null
-{
- "local": {
- "host": ":8080"
- },
- "logger": {
- "level": 3
- },
- "rmr": {
- "protPort": "tcp:4560",
- "maxSize": 2072,
- "numWorkers": 1,
- "txMessages": ["RIC_X2_LOAD_INFORMATION"],
- "rxMessages": ["RIC_X2_LOAD_INFORMATION"]
- },
- "db": {
- "namespace": "ricxapp",
- "host": "dbaas",
- "port": 6379
- }
-}
+++ /dev/null
-{
- "definitions": {},
- "$schema": "http://json-schema.org/draft-07/schema#",
- "$id": "http://example.com/root.json",
- "type": "object",
- "title": "The Root Schema",
- "required": [
- "local",
- "logger",
- "rmr",
- "db"
- ],
- "properties": {
- "local": {
- "$id": "#/properties/local",
- "type": "object",
- "title": "The Local Schema",
- "required": [
- "host"
- ],
- "properties": {
- "host": {
- "$id": "#/properties/local/properties/host",
- "type": "string",
- "title": "The Host Schema",
- "default": "",
- "examples": [
- ":8080"
- ],
- "pattern": "^(.*)$"
- }
- }
- },
- "logger": {
- "$id": "#/properties/logger",
- "type": "object",
- "title": "The Logger Schema",
- "required": [
- "level"
- ],
- "properties": {
- "level": {
- "$id": "#/properties/logger/properties/level",
- "type": "integer",
- "title": "The Level Schema",
- "default": 0,
- "examples": [
- 3
- ]
- }
- }
- },
- "rmr": {
- "$id": "#/properties/rmr",
- "type": "object",
- "title": "The Rmr Schema",
- "required": [
- "protPort",
- "maxSize",
- "numWorkers",
- "txMessages",
- "rxMessages"
- ],
- "properties": {
- "protPort": {
- "$id": "#/properties/rmr/properties/protPort",
- "type": "string",
- "title": "The Protport Schema",
- "default": "",
- "examples": [
- "tcp:4560"
- ],
- "pattern": "^(.*)$"
- },
- "maxSize": {
- "$id": "#/properties/rmr/properties/maxSize",
- "type": "integer",
- "title": "The Maxsize Schema",
- "default": 0,
- "examples": [
- 2072
- ]
- },
- "numWorkers": {
- "$id": "#/properties/rmr/properties/numWorkers",
- "type": "integer",
- "title": "The Numworkers Schema",
- "default": 0,
- "examples": [
- 1
- ]
- },
- "txMessages": {
- "$id": "#/properties/rmr/properties/txMessages",
- "type": "array",
- "title": "The Txmessages Schema"
- },
- "rxMessages": {
- "$id": "#/properties/rmr/properties/rxMessages",
- "type": "array",
- "title": "The Rxmessages Schema"
- }
- }
- },
- "db": {
- "$id": "#/properties/db",
- "type": "object",
- "title": "The Db Schema",
- "required": [
- "host",
- "namespace",
- "port"
- ],
- "properties": {
- "host": {
- "$id": "#/properties/db/properties/host",
- "type": "string",
- "title": "The Host Schema",
- "default": "",
- "examples": [
- "dbaas"
- ],
- "pattern": "^(.*)$"
- },
- "namespace": {
- "$id": "#/properties/db/properties/namespace",
- "type": "string",
- "title": "The Namespace Schema",
- "default": "",
- "examples": [
- "ricxapp"
- ],
- "pattern": "^(.*)$"
- },
- "port": {
- "$id": "#/properties/db/properties/port",
- "type": "integer",
- "title": "The Port Schema",
- "default": 0,
- "examples": [
- 6379
- ]
- }
- }
- }
- }
-}
\ No newline at end of file
Expand the name of the chart.
*/}}
{{- define "ricxapp.name" -}}
-{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+ {{- default .Chart.Name .Values.ricxapp.name | trunc 63 | trimSuffix "-" -}}
{{- end -}}
{{/*
If release name contains chart name it will be used as a full name.
*/}}
{{- define "ricxapp.fullname" -}}
-{{- if .Values.ricxapp.fullnameOverride -}}
-{{- .Values.ricxapp.fullnameOverride | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- $name := default .Chart.Name .Values.ricxapp.nameOverride -}}
-{{- if contains $name .Release.Name -}}
-{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
-{{- else -}}
-{{- printf "%s-%s" .Release.Namespace $name | trunc 63 | trimSuffix "-" -}}
-{{- end -}}
-{{- end -}}
+ {{- $name := ( include "ricxapp.name" . ) -}}
+ {{- $fullname := ( printf "%s-%s" .Release.Namespace $name ) -}}
+ {{- default $fullname .Values.ricxapp.fullname | trunc 63 | trimSuffix "-" -}}
{{- end -}}
{{/*
Create chart name and version as used by the chart label.
*/}}
{{- define "ricxapp.chart" -}}
-{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+ {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
{{- end -}}
{{- define "ricxapp.namespace" -}}
{{- end -}}
+{{- define "ricxapp.containername" -}}
+ {{- $name := ( include "ricxapp.fullname" . ) -}}
+ {{- printf "container-%s" $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
{{- define "ricxapp.imagepullsecret" -}}
{{- printf "docker-reg-cred" -}}
{{- end -}}
-#
-# ==================================================================================
-# Copyright (c) 2019 Nokia
-# ==================================================================================
-#
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# Copyright (c) 2019 Nokia. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################'
-{{ if (eq .Values.ricapp.appconfig.override "") }}
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ if .Values.ricapp.appconfig.override }}{{ .Values.ricapp.appconfig.override }}{{ else }}{{ .Release.Name }}-appconfig{{ end }}
+ name: {{ include "ricxapp.configmapname" . }}-appconfig
data:
-{{ (.Files.Glob "config/*").AsConfig | indent 2 }}
-{{ end }}
+{{- $dbaasservice := .Values.ricplt.dbaasService | quote -}}
+{{- $pltingressurl := .Values.ricplt.pltIngressUrl | quote -}}
+{{- $xappingressurl := .Values.ricplt.xappIngressUrl | quote -}}
+{{- $appmgrrmrservice := .Values.ricplt.appmgrRMRService | quote -}}
+{{- $e2mgrrmrservice := .Values.ricplt.e2mgrRMRService | quote -}}
+{{- $e2termrmrservice := .Values.ricplt.e2termRMRService | quote -}}
+{{- $rtmgrrmrservice := .Values.ricplt.rtmgrRMRService | quote -}}
+{{- $a1mediatorrmrservice := .Values.ricplt.a1mediatorRMRService | quote -}}
+
+{{ (.Files.Glob "config/*").AsConfig | replace "__DBAAS_SERVICE__" $dbaasservice | replace "__PLT_INGRESS_URL__" $pltingressurl | replace "__XAPP_INGRESS_URL__" $xappingressurl | replace "__APPMGR_RMR_SERVICE__" $appmgrrmrservice | replace "__E2MGR_RMR_SERVICE__" $e2mgrrmrservice | replace "__E2TERM_RMR_SERVICE__" $e2termrmrservice | replace "__RTMGR_RMR_SERVICE__" $rtmgrrmrservice | replace "__A1MEDIATOR_RMR_SERVICE__" $a1mediatorrmrservice | indent 2 }}
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ .Release.Name }}-appenv
+ name: {{ include "ricxapp.configmapname" . }}-appenv
data:
- {{- with .Values.ricapp.appenv }}
- {{- toYaml . | nindent 2 }}
+ {{- if .Values.ricxapp.appenv }}
+ {{- toYaml .Values.ricxapp.appenv | nindent 2 }}
{{- end }}
+ DBAAS_SERVICE_HOST: "{{ .Values.ricplt.dbaasService }}"
+ DBAAS_SERVICE_PORT: "6379"
+ DBAAS_PORT_6379_TCP_ADDR: "{{ .Values.ricplt.dbaasService }}"
+ DBAAS_PORT_6379_TCP_PORT: "6379"
+ RMR_RTG_SVC: "{{ .Values.ricxapp.service.rmr.route.port }}"
-#
-# ==================================================================================
-# Copyright (c) 2019 Nokia
-# ==================================================================================
-#
-
+################################################################################
+# Copyright (c) 2019 AT&T Intellectual Property. #
+# Copyright (c) 2019 Nokia. #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################'
apiVersion: apps/v1
kind: Deployment
metadata:
- name: {{ include "ricapp.fullname" . }}
+ name: {{ include "ricxapp.fullname" . }}
labels:
- app.kubernetes.io/name: {{ include "ricapp.name" . }}
- helm.sh/chart: {{ include "ricapp.chart" . }}
- app.kubernetes.io/instance: {{ .Release.Name }}
- app.kubernetes.io/managed-by: {{ .Release.Service }}
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
spec:
- replicas: {{ .Values.ricapp.replicaCount }}
+ replicas: {{ .Values.ricxapp.replicaCount }}
selector:
matchLabels:
- app.kubernetes.io/name: {{ include "ricapp.name" . }}
- app.kubernetes.io/instance: {{ .Release.Name }}
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ release: {{ .Release.Name }}
template:
metadata:
labels:
- app.kubernetes.io/name: {{ include "ricapp.name" . }}
- app.kubernetes.io/instance: {{ .Release.Name }}
+ app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
+ release: {{ .Release.Name }}
spec:
- hostname: {{ .Values.ricapp.hostname }}
+ hostname: {{ include "ricxapp.name" . }}
imagePullSecrets:
- name: {{ include "ricxapp.imagepullsecret" . }}
containers:
- - name: {{ .Chart.Name }}
- image: "{{ .Values.global.repository }}/{{ .Values.ricapp.image.name }}:{{ .Values.ricapp.image.tag }}"
- imagePullPolicy: {{ .Values.global.image.pullPolicy }}
+ - name: {{ include "ricxapp.containername" . }}
+ image: "{{ .Values.ricxapp.image.repository }}/{{ .Values.ricxapp.image.name }}:{{ .Values.ricxapp.image.tag }}"
+ imagePullPolicy: {{ .Values.ricxapp.image.pullPolicy }}
ports:
- name: http
- containerPort: {{ .Values.ricapp.service.http.containerPort }}
+ containerPort: {{ .Values.ricxapp.service.http.containerPort }}
protocol: TCP
- - name: rmr
- containerPort: {{ .Values.ricapp.service.rmr.containerPort }}
+ - name: rmrRoute
+ containerPort: {{ .Values.ricxapp.service.rmr.route.port }}
+ protocol: TCP
+ - name: rmrData
+ containerPort: {{ .Values.ricxapp.service.rmr.data.port }}
protocol: TCP
volumeMounts:
- name: config-volume
- mountPath: {{ .Values.ricapp.appconfig.path }}
- - name: cert-volume
- mountPath: {{ .Values.ricapp.cert.path }}
+ mountPath: {{ .Values.ricxapp.appconfig.path }}
+ envFrom:
+ - configMapRef:
+ name: {{ include "ricxapp.configmapname" . }}-appenv
livenessProbe:
httpGet:
- path: {{ .Values.ricapp.probes.healthAliveCheckEndpoint }}
- port: 8080
+ path: {{ .Values.ricxapp.probes.healthAliveCheckEndpoint }}
+ port: {{ .Values.ricxapp.service.http.containerPort }}
initialDelaySeconds: 5
periodSeconds: 15
readinessProbe:
httpGet:
- path: {{ .Values.ricapp.probes.healthReadyCheckEndpoint }}
- port: 8080
+ path: {{ .Values.ricxapp.probes.healthReadyCheckEndpoint }}
+ port: {{ .Values.ricxapp.service.http.containerPort }}
initialDelaySeconds: 5
periodSeconds: 15
restartPolicy: Always
- resources:
- {{- toYaml .Values.ricapp.resources | nindent 12 }}
- securityContext:
- # ubuntu
- #runAsUser: 1000
- #allowPrivilegeEscalation: false
- {{- with .Values.ricapp.nodeSelector }}
- nodeSelector:
- {{- toYaml . | nindent 8 }}
- {{- end }}
- {{- with .Values.ricapp.affinity }}
- affinity:
- {{- toYaml . | nindent 8 }}
- {{- end }}
- {{- with .Values.ricapp.tolerations }}
- tolerations:
- {{- toYaml . | nindent 8 }}
- {{- end }}
-
volumes:
- name: config-volume
configMap:
- name: {{ if .Values.ricapp.appconfig.override }}{{ .Values.ricapp.appconfig.override }}{{ else }}{{ .Release.Name }}-appconfig{{ end }}
- - name: cert-volume
- emptyDir: {}
+ name: {{ include "ricxapp.configmapname" . }}-appconfig
spec:
type: ClusterIP
ports:
- - port: {{ .Values.ricxapp.service.rmr.port }}
- targetPort: rmr
+ - port: {{ .Values.ricxapp.service.rmr.data.port }}
+ targetPort: rmrData
protocol: TCP
- name: rmr
+ name: rmrData
+ - port: {{ .Values.ricxapp.service.rmr.route.port }}
+ targetPort: rmrRoute
+ protocol: TCP
+ name: rmrRoute
selector:
app: {{ include "ricxapp.namespace" . }}-{{ include "ricxapp.name" . }}
release: {{ .Release.Name }}
################################################################################'
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
-
-global:
- # modify this section to point to your local testing settings
- repository: "${__RUNRICENV_DOCKER_HOST__}:${__RUNRICENV_DOCKER_PORT__}"
- repositoryCred:
- user: "${__RUNRICENV_DOCKER_USER__}"
- password: "${__RUNRICENV_DOCKER_PASS__}"
- image:
- pullPolicy: IfNotPresent
-
ricplt:
# This section is reserved for values imported from RIC Platform charts
+ dbaasService: "service-ricplt-dbaas-tcp.ricplt.svc.cluster.local"
+ pltIngressUrl: "ricplt-entry"
+ xappIngressUrl: "ricxapp-entry"
-ricapp:
+ appmgrRMRService: "service-ricplt-appmgr-rmr.ricplt.svc.cluster.local"
+ e2mgrRMRService: "service-ricplt-e2mgr-rmr.ricplt.svc.cluster.local"
+ e2termRMRService: "service-ricplt-e2term-rmr.ricplt.svc.cluster.local"
+ rtmgrRMRService: "service-ricplt-rtmgr-rmr.ricplt.svc.cluster.local"
+ a1mediatorRMRService: "service-ricplt-a1mediator-rmr.ricplt.svc.cluster.local"
+
+
+
+ricxapp:
# This section is for xapp. Templates to be resolved from xApp descriptor
replicaCount: 1
name: xapp-std
- fullname: xapp-std
- nameOverride: ""
- fullnameOverride: ""
-
- # The name of the process that indicates the liveness of the component
- livenessprocessname: xapp-std
+ # Your can specify the chart fullname by using the following option
+ #fullname: xapp-std
image:
+ pullPolicy: IfNotPresent
+ repository: xapp-std-reg
name: xapp-std
tag: latest
port: 8080
containerPort: 8080
rmr:
- port: 4560
- containerPort: 4560
+ route:
+ port: 4561
+ data:
+ port: 4560
probes:
healthAliveCheckEndpoint: ric/v1/health/alive
appconfig:
path: /opt/ric/config
- override: ""
-
- cert:
- path: /opt/ric/certificates
- object: {}
-
- hostname: xapp-std
-
- resources: {}
-
- nodeSelector: {}
-
- tolerations: []
-
- affinity: {}
+ appenv:
+++ /dev/null
-#!/bin/bash
-################################################################################
-# Copyright (c) 2019 AT&T Intellectual Property. #
-# Copyright (c) 2019 Nokia. #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-
-if (( $# != 1 )); then
- echo "Missing parameters: <xapp-name>"
- exit
-fi
-
-source ./scripts/ric_env.sh
-if [ -z $__RICENV_SET__ ]; then
- echo "Edit your ric_env.sh for first!"
- exit
-fi
-
-# Update the local values
-RESULT_DIR=./generated
-rm -rf $RESULT_DIR && mkdir -p $RESULT_DIR && cp -rf ./helm $RESULT_DIR
-
-FILELIST=$(find ./helm \( -name "*.tpl" -o -name "*.yaml" \))
-for f in $FILELIST; do
- envsubst '${__RUNRICENV_DOCKER_HOST__} ${__RUNRICENV_DOCKER_PORT__}' < $f > "$RESULT_DIR/$f";
-done
-
-# Rename the helm chart folder
-mv $RESULT_DIR/helm/xapp-std $RESULT_DIR/helm/$1
-find $RESULT_DIR/helm/$1 -type f | xargs sed -i -e "s/xapp-std/$1/g"
-
-# Push to helm chart repo
-helm package generated/helm/$1 | awk '{ print $NF }' | xargs mv -t $__RUNRICENV_HELMREPO_DIR__
-helm repo index $__RUNRICENV_HELMREPO_DIR__
-helm repo update
+++ /dev/null
-#!/bin/bash
-################################################################################
-# Copyright (c) 2019 AT&T Intellectual Property. #
-# Copyright (c) 2019 Nokia. #
-# #
-# Licensed under the Apache License, Version 2.0 (the "License"); #
-# you may not use this file except in compliance with the License. #
-# You may obtain a copy of the License at #
-# #
-# http://www.apache.org/licenses/LICENSE-2.0 #
-# #
-# Unless required by applicable law or agreed to in writing, software #
-# distributed under the License is distributed on an "AS IS" BASIS, #
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
-# See the License for the specific language governing permissions and #
-# limitations under the License. #
-################################################################################
-
-
-# customize the following repo info to local environment
-export __RICENV_SET__='true'
-export __RUNRICENV_DOCKER_HOST__='192.168.0.6'
-export __RUNRICENV_DOCKER_PORT__='5000'
-export __RUNRICENV_HELMREPO_DIR__='/var/www/html/charts/'
\ No newline at end of file
Code Review / it / dep.git / commitdiff