-Many aspects of RMR behavior are controlled via environment
-variables. These values are read when a user application
-invokes the RMR initialization function. This allows these
-variables to be set before the application is started as a
-function of the true environment, or set by the application
-as a means for the application to influence RMR's behaviour.
-The following is a list of environment variables which RMR
-recognizes. Also see the main RMR manual page in the
-development package for more details.
-
- .. list-table::
- :widths: auto
- :header-rows: 0
- :class: borderless
-
- * - **RMR_ASYNC_CONN**
- -
- Allows the async connection mode to be turned off (by setting
- the value to 0). When set to 1, or missing from the
- environment, RMR will invoke the connection interface in the
- transport mechanism using the non-blocking (async) mode. This
- will likely result in many "soft failures" (retry) until the
- connection is established, but allows the application to
- continue unimpeded should the connection be slow to set up.
-
- * - **RMR_BIND_IF**
- -
- This provides the interface that RMR will bind listen ports
- to, allowing for a single interface to be used rather than
- listening across all interfaces. This should be the IP
- address assigned to the interface that RMR should listen on,
- and if not defined RMR will listen on all interfaces.
-
- * - **RMR_CTL_PORT**
- -
- This variable defines the port that RMR should open for
- communications with Route Manager, and other RMR control
- applications. If not defined, the port 4561 is assumed.
-
- Previously, the ``RMR_RTG_SVC`` (route table generator
- service port) was used to define this port. However, a future
- version of Route Manager will require RMR to connect and
- request tables, thus that variable is now used to supply the
- Route Manager's well-known address and port.
-
- To maintain backwards compatibility with the older Route
- Manager versions, the presence of this variable in the
- environment will shift RMR's behaviour with respect to the
- default value used when ``RMR_RTG_SVC`` is **not** defined.
-
- When ``RMR_CTL_PORT`` is **defined:** RMR assumes that Route
- Manager requires RMR to connect and request table updates is
- made, and the default well-known address for Route manager is
- used (routemgr:4561).
-
- When ``RMR_CTL_PORT`` is **undefined:** RMR assumes that
- Route Manager will connect and push table updates, thus the
- default listen port (4561) is used.
-
- To avoid any possible misinterpretation and/or incorrect
- assumptions on the part of RMR, it is recommended that both
- the ``RMR_CTL_PORT`` and ``RMR_RTG_SVC`` be defined. In the
- case where both variables are defined, RMR will behave
- exactly as is communicated with the variable's values.
-
- * - **RMR_RTG_SVC**
- -
- The value of this variable depends on the Route Manager in
- use.
-
- When the Route Manager is expecting to connect to an xAPP and
- push route tables, this variable must indicate the
- ``port`` which RMR should use to listen for these
- connections.
-
- When the Route Manager is expecting RMR to connect and
- request a table update during initialisation, the variable
- should be the ``host`` of the Route Manager process.
-
- The ``RMR_CTL_PORT`` variable (added with the support of
- sending table update requests to Route manager), controls the
- behaviour if this variable is not set. See the description of
- that variable for details.
-
- * - **RMR_HR_LOG**
- -
- By default RMR writes messages to standard error (incorrectly
- referred to as log messages) in human readable format. If
- this environment variable is set to 0, the format of standard
- error messages might be written in some format not easily
- read by humans. If missing, a value of 1 is assumed.
-
- * - **RMR_LOG_VLEVEL**
- -
- This is a numeric value which corresponds to the verbosity
- level used to limit messages written to standard error. The
- lower the number the less chatty RMR functions are during
- execution. The following is the current relationship between
- the value set on this variable and the messages written:
-
-
- .. list-table::
- :widths: auto
- :header-rows: 0
- :class: borderless
-
- * - **0**
- -
- Off; no messages of any sort are written.
-
- * - **1**
- -
- Only critical messages are written (default if this variable
- does not exist)
-
- * - **2**
- -
- Errors and all messages written with a lower value.
-
- * - **3**
- -
- Warnings and all messages written with a lower value.
-
- * - **4**
- -
- Informational and all messages written with a lower value.
-
- * - **5**
- -
- Debugging mode -- all messages written, however this requires
- RMR to have been compiled with debugging support enabled.
-
-
-
- * - **RMR_RTG_ISRAW**
- -
- **Deprecated.** Should be set to 1 if the route table
- generator is sending "plain" messages (not using RMR to send
- messages), 0 if the RTG is using RMR to send. The default is
- 1 as we don't expect the RTG to use RMR.
-
- This variable is only recognised when using the NNG transport
- library as it is not possible to support NNG "raw"
- communications with other transport libraries. It is also
- necessary to match the value of this variable with the
- capabilities of the Route Manager; at some point in the
- future RMR will assume that all Route Manager messages will
- arrive via an RMR connection and will ignore this variable.
-
- * - **RMR_SEED_RT**
- -
- This is used to supply a static route table which can be used
- for debugging, testing, or if no route table generator
- process is being used to supply the route table. If not
- defined, no static table is used and RMR will not report
- *ready* until a table is received. The static route table may
- contain both the route table (between newrt start and end
- records), and the MEID map (between meid_map start and end
- records).
-
- * - **RMR_SRC_ID**
- -
- This is either the name or IP address which is placed into
- outbound messages as the message source. This will used when
- an RMR based application uses the rmr_rts_msg() function to
- return a response to the sender. If not supplied RMR will use
- the hostname which in some container environments might not
- be routable.
-
- The value of this variable is also used for Route Manager
- messages which are sent via an RMR connection.
-
- * - **RMR_VCTL_FILE**
- -
- This supplies the name of a verbosity control file. The core
- RMR functions do not produce messages unless there is a
- critical failure. However, the route table collection thread,
- not a part of the main message processing component, can
- write additional messages to standard error. If this variable
- is set, RMR will extract the verbosity level for these
- messages (0 is silent) from the first line of the file.
- Changes to the file are detected and thus the level can be
- changed dynamically, however RMR will only suss out this
- variable during initialisation, so it is impossible to enable
- verbosity after startup.
-
- * - **RMR_WARNINGS**
- -
- If set to 1, RMR will write some warnings which are
- non-performance impacting. If the variable is not defined, or
- set to 0, RMR will not write these additional warnings.
-
-
+Many aspects of RMR behavior are controlled via environment
+variables. These values are read when a user application
+invokes the RMR initialization function. This allows these
+variables to be set before the application is started as a
+function of the true environment, or set by the application
+as a means for the application to influence RMR's behaviour.
+The following is a list of environment variables which RMR
+recognizes. Also see the main RMR manual page in the
+development package for more details.
+
+ .. list-table::
+ :widths: auto
+ :header-rows: 0
+ :class: borderless
+
+ * - **RMR_ASYNC_CONN**
+ -
+ Allows the async connection mode to be turned off (by setting
+ the value to 0). When set to 1, or missing from the
+ environment, RMR will invoke the connection interface in the
+ transport mechanism using the non-blocking (async) mode. This
+ will likely result in many "soft failures" (retry) until the
+ connection is established, but allows the application to
+ continue unimpeded should the connection be slow to set up.
+
+ * - **RMR_BIND_IF**
+ -
+ This provides the interface that RMR will bind listen ports
+ to, allowing for a single interface to be used rather than
+ listening across all interfaces. This should be the IP
+ address assigned to the interface that RMR should listen on,
+ and if not defined RMR will listen on all interfaces.
+
+ * - **RMR_CTL_PORT**
+ -
+ This variable defines the port that RMR should open for
+ communications with Route Manager, and other RMR control
+ applications. If not defined, the port 4561 is assumed.
+
+ Previously, the ``RMR_RTG_SVC`` (route table generator
+ service port) was used to define this port. However, a future
+ version of Route Manager will require RMR to connect and
+ request tables, thus that variable is now used to supply the
+ Route Manager's well-known address and port.
+
+ To maintain backwards compatibility with the older Route
+ Manager versions, the presence of this variable in the
+ environment will shift RMR's behaviour with respect to the
+ default value used when ``RMR_RTG_SVC`` is **not** defined.
+
+ When ``RMR_CTL_PORT`` is **defined:** RMR assumes that Route
+ Manager requires RMR to connect and request table updates is
+ made, and the default well-known address for Route manager is
+ used (routemgr:4561).
+
+ When ``RMR_CTL_PORT`` is **undefined:** RMR assumes that
+ Route Manager will connect and push table updates, thus the
+ default listen port (4561) is used.
+
+ To avoid any possible misinterpretation and/or incorrect
+ assumptions on the part of RMR, it is recommended that both
+ the ``RMR_CTL_PORT`` and ``RMR_RTG_SVC`` be defined. In the
+ case where both variables are defined, RMR will behave
+ exactly as is communicated with the variable's values.
+
+ * - **RMR_RTG_SVC**
+ -
+ The value of this variable depends on the Route Manager in
+ use.
+
+ When the Route Manager is expecting to connect to an xAPP and
+ push route tables, this variable must indicate the
+ ``port`` which RMR should use to listen for these
+ connections.
+
+ When the Route Manager is expecting RMR to connect and
+ request a table update during initialisation, the variable
+ should be the ``host`` of the Route Manager process.
+
+ The ``RMR_CTL_PORT`` variable (added with the support of
+ sending table update requests to Route manager), controls the
+ behaviour if this variable is not set. See the description of
+ that variable for details.
+
+ * - **RMR_HR_LOG**
+ -
+ By default RMR writes messages to standard error (incorrectly
+ referred to as log messages) in human readable format. If
+ this environment variable is set to 0, the format of standard
+ error messages might be written in some format not easily
+ read by humans. If missing, a value of 1 is assumed.
+
+ * - **RMR_LOG_VLEVEL**
+ -
+ This is a numeric value which corresponds to the verbosity
+ level used to limit messages written to standard error. The
+ lower the number the less chatty RMR functions are during
+ execution. The following is the current relationship between
+ the value set on this variable and the messages written:
+
+
+ .. list-table::
+ :widths: auto
+ :header-rows: 0
+ :class: borderless
+
+ * - **0**
+ -
+ Off; no messages of any sort are written.
+
+ * - **1**
+ -
+ Only critical messages are written (default if this variable
+ does not exist)
+
+ * - **2**
+ -
+ Errors and all messages written with a lower value.
+
+ * - **3**
+ -
+ Warnings and all messages written with a lower value.
+
+ * - **4**
+ -
+ Informational and all messages written with a lower value.
+
+ * - **5**
+ -
+ Debugging mode -- all messages written, however this requires
+ RMR to have been compiled with debugging support enabled.
+
+
+
+ * - **RMR_RTG_ISRAW**
+ -
+ **Deprecated.** Should be set to 1 if the route table
+ generator is sending "plain" messages (not using RMR to send
+ messages), 0 if the RTG is using RMR to send. The default is
+ 1 as we don't expect the RTG to use RMR.
+
+ This variable is only recognised when using the NNG transport
+ library as it is not possible to support NNG "raw"
+ communications with other transport libraries. It is also
+ necessary to match the value of this variable with the
+ capabilities of the Route Manager; at some point in the
+ future RMR will assume that all Route Manager messages will
+ arrive via an RMR connection and will ignore this variable.
+
+ * - **RMR_SEED_RT**
+ -
+ This is used to supply a static route table which can be used
+ for debugging, testing, or if no route table generator
+ process is being used to supply the route table. If not
+ defined, no static table is used and RMR will not report
+ *ready* until a table is received. The static route table may
+ contain both the route table (between newrt start and end
+ records), and the MEID map (between meid_map start and end
+ records).
+
+ * - **RMR_SRC_ID**
+ -
+ This is either the name or IP address which is placed into
+ outbound messages as the message source. This will used when
+ an RMR based application uses the rmr_rts_msg() function to
+ return a response to the sender. If not supplied RMR will use
+ the hostname which in some container environments might not
+ be routable.
+
+ The value of this variable is also used for Route Manager
+ messages which are sent via an RMR connection.
+
+ * - **RMR_VCTL_FILE**
+ -
+ This supplies the name of a verbosity control file. The core
+ RMR functions do not produce messages unless there is a
+ critical failure. However, the route table collection thread,
+ not a part of the main message processing component, can
+ write additional messages to standard error. If this variable
+ is set, RMR will extract the verbosity level for these
+ messages (0 is silent) from the first line of the file.
+ Changes to the file are detected and thus the level can be
+ changed dynamically, however RMR will only suss out this
+ variable during initialisation, so it is impossible to enable
+ verbosity after startup.
+
+ * - **RMR_WARNINGS**
+ -
+ If set to 1, RMR will write some warnings which are
+ non-performance impacting. If the variable is not defined, or
+ set to 0, RMR will not write these additional warnings.
+
+