+#!/bin/sh
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+#
+# Common env
+#
+# username to build
+export MYUNAME=stxbuilder
+export MYUID=1001
+export MY_EMAIL="oran.inf@windriver.com"
+export WGET_OPENDEV="wget --no-check-certificate"
+export LOCALDISK="/localdisk"
+export MIRROR_DIR="/import/mirrors"
+
+groupadd cgts
+echo "mock:x:751:root" >> /etc/group
+echo "mockbuild:x:9001:" >> /etc/group
+
+useradd -r -u $MYUID -g cgts -m $MYUNAME
+echo "Li69nux*"|sudo passwd --stdin ${MYUNAME}
+
+gpasswd -a $MYUNAME mock
+
+mkdir -p ${LOCALDISK}/loadbuild/mock-cache
+mkdir -p ${LOCALDISK}/loadbuild/mock
+mkdir -p ${LOCALDISK}/designer
+mkdir -p ${MIRROR_DIR}/CentOS
+
+chmod 775 ${LOCALDISK}/loadbuild/mock
+chown root:mock ${LOCALDISK}/loadbuild/mock
+chmod 775 ${LOCALDISK}/loadbuild/mock-cache
+chown root:mock ${LOCALDISK}/loadbuild/mock-cache
+
+
+# Proxy configuration
+export http_proxy="http://147.11.252.42:9090"
+export https_proxy="http://147.11.252.42:9090"
+export ftp_proxy="http://147.11.252.42:9090"
+
+echo "proxy=$http_proxy" >> /etc/yum.conf && \
+ echo -e "export http_proxy=$http_proxy\nexport https_proxy=$https_proxy\n\
+export ftp_proxy=$ftp_proxy" >> /root/.bashrc
+
+
+# CentOS & EPEL URLs that match the base image
+# Override these with --build-arg if you have a mirror
+CENTOS_7_8_URL=https://vault.centos.org/centos/7.8.2003
+CENTOS_7_9_URL=http://mirror.centos.org/centos-7/7.9.2009
+EPEL_7_8_URL=https://archives.fedoraproject.org/pub/archive/epel/7.2020-04-20
+
+# Lock down centos & epel repos
+rm -f /etc/yum.repos.d/*
+cd /etc/yum.repos.d/
+${WGET_OPENDEV} https://opendev.org/starlingx/tools/raw/branch/master/toCOPY/yum.repos.d/centos-7.9.repo
+${WGET_OPENDEV} https://opendev.org/starlingx/tools/raw/branch/master/toCOPY/yum.repos.d/centos.repo
+${WGET_OPENDEV} https://opendev.org/starlingx/tools/raw/branch/master/toCOPY/yum.repos.d/epel.repo
+
+cd /etc/pki/rpm-gpg/
+${WGET_OPENDEV} https://opendev.org/starlingx/tools/raw/branch/master/centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-EPEL-7
+
+cd -
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY* && \
+ echo "http_caching=packages" >> /etc/yum.conf && \
+ echo "skip_missing_names_on_install=0" >>/etc/yum.conf && \
+ # yum variables must be in lower case ; \
+ echo "$CENTOS_7_8_URL" >/etc/yum/vars/centos_7_8_url && \
+ echo "$EPEL_7_8_URL" >/etc/yum/vars/epel_7_8_url && \
+ echo "$CENTOS_7_9_URL" >/etc/yum/vars/centos_7_9_url && \
+ # disable fastestmirror plugin because we are not using mirrors ; \
+ # FIXME: use a mirrorlist URL for centos/vault/epel archives. I couldn't find one.
+ sed -i 's/enabled=1/enabled=0/' /etc/yum/pluginconf.d/fastestmirror.conf && \
+ echo "[main]" >> /etc/yum/pluginconf.d/subscription-manager.conf && \
+ echo "enabled=0" >> /etc/yum/pluginconf.d/subscription-manager.conf && \
+ yum clean all && \
+ yum makecache && \
+ yum install -y deltarpm
+
+
+# root CA cert expired on October 1st, 2021
+yum update -y --enablerepo=centos-7.9-updates ca-certificates
+
+# Download required dependencies by mirror/build processes.
+yum install -y \
+ anaconda \
+ anaconda-runtime \
+ autoconf-archive \
+ autogen \
+ automake \
+ bc \
+ bind \
+ bind-utils \
+ bison \
+ cpanminus \
+ createrepo \
+ createrepo_c \
+ deltarpm \
+ docker-client \
+ expat-devel \
+ flex \
+ isomd5sum \
+ gcc \
+ gettext \
+ git \
+ libguestfs-tools \
+ libtool \
+ libxml2 \
+ lighttpd \
+ lighttpd-fastcgi \
+ lighttpd-mod_geoip \
+ net-tools \
+ mkisofs \
+ mongodb \
+ mongodb-server \
+ pax \
+ perl-CPAN \
+ python-deltarpm \
+ python-pep8 \
+ python-pip \
+ python-psutil \
+ python2-psutil \
+ python36-psutil \
+ python36-requests \
+ python3-devel \
+ python-sphinx \
+ python-subunit \
+ python-virtualenv \
+ python-yaml \
+ python2-ruamel-yaml \
+ postgresql \
+ qemu-kvm \
+ quilt \
+ rpm-build \
+ rpm-sign \
+ rpm-python \
+ squashfs-tools \
+ sudo \
+ systemd \
+ syslinux \
+ udisks2 \
+ vim-enhanced \
+ wget
+
+# clone the tools repo
+cd ~
+git clone https://opendev.org/starlingx/tools.git
+
+# Finally install a locked down version of mock
+yum install -y https://mirrors.xlhy1.com/centos/7/updates/x86_64/Packages/python36-rpm-4.11.3-7.el7.x86_64.rpm
+yum install -y \
+ http://mirror.starlingx.cengn.ca/mirror/centos/epel/dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/mock-1.4.16-1.el7.noarch.rpm \
+ http://mirror.starlingx.cengn.ca/mirror/centos/epel/dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/mock-core-configs-31.6-1.el7.noarch.rpm
+
+# mock custumizations
+# forcing chroots since a couple of packages naughtily insist on network access and
+# we dont have nspawn and networks happy together.
+useradd -s /sbin/nologin -u 9001 -g 9001 mockbuild && \
+ rmdir /var/lib/mock && \
+ ln -s ${LOCALDISK}/loadbuild/mock /var/lib/mock && \
+ rmdir /var/cache/mock && \
+ ln -s ${LOCALDISK}/loadbuild/mock-cache /var/cache/mock && \
+ echo "config_opts['use_nspawn'] = False" >> /etc/mock/site-defaults.cfg && \
+ echo "config_opts['rpmbuild_networking'] = True" >> /etc/mock/site-defaults.cfg && \
+ echo >> /etc/mock/site-defaults.cfg
+
+# cpan modules, installing with cpanminus to avoid stupid questions since cpan is whack
+cpanm --notest Fatal && \
+ cpanm --notest XML::SAX && \
+ cpanm --notest XML::SAX::Expat && \
+ cpanm --notest XML::Parser && \
+ cpanm --notest XML::Simple
+
+# Install repo tool
+curl https://storage.googleapis.com/git-repo-downloads/repo > /usr/local/bin/repo && \
+ chmod a+x /usr/local/bin/repo
+
+# installing go and setting paths
+export GOPATH="/usr/local/go"
+export PATH="${GOPATH}/bin:${PATH}"
+yum install -y golang && \
+ mkdir -p ${GOPATH}/bin && \
+ curl https://raw.githubusercontent.com/golang/dep/master/install.sh | sh
+
+# Uprev git, repo
+yum install -y dh-autoreconf curl-devel expat-devel gettext-devel openssl-devel perl-devel zlib-devel asciidoc xmlto docbook2X && \
+ cd /tmp && \
+ wget https://github.com/git/git/archive/v2.29.2.tar.gz -O git-2.29.2.tar.gz && \
+ tar xzvf git-2.29.2.tar.gz && \
+ cd git-2.29.2 && \
+ make configure && \
+ ./configure --prefix=/usr/local && \
+ make all doc && \
+ make install install-doc && \
+ cd /tmp && \
+ rm -rf git-2.29.2.tar.gz git-2.29.2
+
+# Systemd Enablement
+#(cd /lib/systemd/system/sysinit.target.wants/; for i in *; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done); \
+# rm -f /lib/systemd/system/multi-user.target.wants/*;\
+# rm -f /etc/systemd/system/*.wants/*;\
+# rm -f /lib/systemd/system/local-fs.target.wants/*; \
+# rm -f /lib/systemd/system/sockets.target.wants/*udev*; \
+# rm -f /lib/systemd/system/sockets.target.wants/*initctl*; \
+# rm -f /lib/systemd/system/basic.target.wants/*;\
+# rm -f /lib/systemd/system/anaconda.target.wants/*
+
+# pip installs
+# Install required python modules globally; versions are in the constraints file.
+# Be careful not to replace modules provided by RPMs as it may break
+# other system packages. Look for warnings similar to "Uninstalling a
+# distutils installed project has been deprecated" from pip.
+pip install -c ~/tools/toCOPY/builder-constraints.txt \
+ testrepository \
+ fixtures \
+ pbr \
+ git-review \
+ python-subunit \
+ junitxml \
+ testtools
+
+# Create a sane py27 virtualenv
+virtualenv /opt/py27 && \
+ source /opt/py27/bin/activate && \
+ pip install -c ~/tools/toCOPY/builder-opt-py27-constraints.txt \
+ tox \
+ && \
+ for prog in tox ; do \
+ ln -s /opt/py27/bin/$prog /usr/bin ; \
+ done
+
+# Inherited tools for mock stuff
+# we at least need the mock_cache_unlock tool
+# they install into /usr/bin
+cp -rf ~/tools/toCOPY/mock_overlay /opt/mock_overlay
+cd /opt/mock_overlay && \
+ make && \
+ make install
+
+# This image requires a set of scripts and helpers
+# for working correctly, in this section they are
+# copied inside the image.
+cp ~/tools/toCOPY/finishSetup.sh /usr/local/bin
+cp ~/tools/toCOPY/populate_downloads.sh /usr/local/bin
+cp ~/tools/toCOPY/generate-local-repo.sh /usr/local/bin
+cp ~/tools/toCOPY/generate-centos-repo.sh /usr/local/bin
+cp ~/tools/toCOPY/lst_utils.sh /usr/local/bin
+cp ~/tools/toCOPY/.inputrc /home/$MYUNAME/
+chown $MYUNAME:cgts /home/$MYUNAME/.inputrc
+
+# Thes are included for backward compatibility, and
+# should be removed after a reasonable time.
+cp ~/tools/toCOPY/generate-cgcs-tis-repo /usr/local/bin
+cp ~/tools/toCOPY/generate-cgcs-centos-repo.sh /usr/local/bin
+
+# ENV setup
+echo "# Load stx-builder configuration" >> /etc/profile.d/stx-builder-conf.sh && \
+ echo "if [[ -r \${HOME}/buildrc ]]; then" >> /etc/profile.d/stx-builder-conf.sh && \
+ echo " source \${HOME}/buildrc" >> /etc/profile.d/stx-builder-conf.sh && \
+ echo " export PROJECT SRC_BUILD_ENVIRONMENT MYPROJECTNAME MYUNAME" >> /etc/profile.d/stx-builder-conf.sh && \
+ echo " export MY_BUILD_CFG MY_BUILD_CFG_RT MY_BUILD_CFG_STD MY_BUILD_DIR MY_BUILD_ENVIRONMENT MY_BUILD_ENVIRONMENT_FILE MY_BUILD_ENVIRONMENT_FILE_RT MY_BUILD_ENVIRONMENT_FILE_STD MY_DEBUG_BUILD_CFG_RT MY_DEBUG_BUILD_CFG_STD MY_LOCAL_DISK MY_MOCK_ROOT MY_REPO MY_REPO_ROOT_DIR MY_SRC_RPM_BUILD_DIR MY_RELEASE MY_WORKSPACE LAYER" >> /etc/profile.d/stx-builder-conf.sh && \
+ echo "fi" >> /etc/profile.d/stx-builder-conf.sh && \
+ echo "export FORMAL_BUILD=0" >> /etc/profile.d/stx-builder-conf.sh && \
+ echo "export PATH=\$MY_REPO/build-tools:\$PATH" >> /etc/profile.d/stx-builder-conf.sh
+
+# centos locales are broken. this needs to be run after the last yum install/update
+localedef -i en_US -f UTF-8 en_US.UTF-8
+
+# setup
+mkdir -p /www/run && \
+ mkdir -p /www/logs && \
+ mkdir -p /www/home && \
+ mkdir -p /www/root/htdocs/localdisk && \
+ chown -R $MYUID:cgts /www && \
+ ln -s ${LOCALDISK}/loadbuild /www/root/htdocs/localdisk/loadbuild && \
+ ln -s ${MIRROR_DIR}/CentOS /www/root/htdocs/CentOS && \
+ ln -s ${LOCALDISK}/designer /www/root/htdocs/localdisk/designer
+
+# lighthttpd setup
+# chmod for /var/log/lighttpd fixes a centos issue
+# in place sed for server root since it's expanded soon thereafter
+# echo "server.bind = \"localhost\"" >> /etc/lighttpd/lighttpd.conf && \
+echo "$MYUNAME ALL=(ALL:ALL) NOPASSWD:ALL" >> /etc/sudoers && \
+ mkdir -p /var/log/lighttpd && \
+ chmod a+rwx /var/log/lighttpd/ && \
+ sed -i 's%^var\.log_root.*$%var.log_root = "/www/logs"%g' /etc/lighttpd/lighttpd.conf && \
+ sed -i 's%^var\.server_root.*$%var.server_root = "/www/root"%g' /etc/lighttpd/lighttpd.conf && \
+ sed -i 's%^var\.home_dir.*$%var.home_dir = "/www/home"%g' /etc/lighttpd/lighttpd.conf && \
+ sed -i 's%^var\.state_dir.*$%var.state_dir = "/www/run"%g' /etc/lighttpd/lighttpd.conf && \
+ sed -i "s/server.port/#server.port/g" /etc/lighttpd/lighttpd.conf && \
+ sed -i "s/server.use-ipv6/#server.use-ipv6/g" /etc/lighttpd/lighttpd.conf && \
+ sed -i "s/server.username/#server.username/g" /etc/lighttpd/lighttpd.conf && \
+ sed -i "s/server.groupname/#server.groupname/g" /etc/lighttpd/lighttpd.conf && \
+ sed -i "s/server.bind/#server.bind/g" /etc/lighttpd/lighttpd.conf && \
+ sed -i "s/server.document-root/#server.document-root/g" /etc/lighttpd/lighttpd.conf && \
+ sed -i "s/server.dirlisting/#server.dirlisting/g" /etc/lighttpd/lighttpd.conf && \
+ echo "server.port = 8088" >> /etc/lighttpd/lighttpd.conf && \
+ echo "server.use-ipv6 = \"disable\"" >> /etc/lighttpd/lighttpd.conf && \
+ echo "server.username = \"$MYUNAME\"" >> /etc/lighttpd/lighttpd.conf && \
+ echo "server.groupname = \"cgts\"" >> /etc/lighttpd/lighttpd.conf && \
+ echo "server.bind = \"localhost\"" >> /etc/lighttpd/lighttpd.conf && \
+ echo "server.document-root = \"/www/root/htdocs\"" >> /etc/lighttpd/lighttpd.conf && \
+ sed -i "s/dir-listing.activate/#dir-listing.activate/g" /etc/lighttpd/conf.d/dirlisting.conf && \
+ echo "dir-listing.activate = \"enable\"" >> /etc/lighttpd/conf.d/dirlisting.conf
+
+#systemctl enable lighttpd
+#systemctl start lighttpd
+/usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf
+
+
+echo "export PATH=/usr/local/bin:${LOCALDISK}/designer/$MYUNAME/bin:\$PATH" >> /home/$MYUNAME/.bashrc
+chmod a+x /usr/local/bin/*
+
+# Genrate a git configuration file in order to save an extra step
+# for end users, this file is required by "repo" tool.
+cd /home/$MYUNAME/
+runuser -u $MYUNAME -- git config --global user.email $MY_EMAIL && \
+ runuser -u $MYUNAME -- git config --global user.name $MYUNAME && \
+ runuser -u $MYUNAME -- git config --global color.ui false
+
+# Customizations for mirror creation
+rm -f /etc/yum.repos.d/*
+cp -f ~/tools/centos-mirror-tools/yum.repos.d/* /etc/yum.repos.d/
+cp -f ~/tools/centos-mirror-tools/rpm-gpg-keys/* /etc/pki/rpm-gpg/
+
+# Import GPG keys
+rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
+
+# Try to continue a yum command even if a StarlingX repo is unavailable.
+yum-config-manager --setopt=StarlingX\*.skip_if_unavailable=1 --save