+#!/bin/bash
+
+# ============LICENSE_START===============================================
+# Copyright (C) 2021 Nordix Foundation. All rights reserved.
+# ========================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=================================================
+#
+
+# This is a script that contains container/service management functions and test functions for Keycloak
+
+
+################ Test engine functions ################
+
+# Create the image var used during the test
+# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
+# <image-tag-suffix> is present only for images with staging, snapshot,release tags
+__KEYCLOAK_imagesetup() {
+ __check_and_create_image_var KEYCLOAK "KEYCLOAK_IMAGE" "KEYCLOAK_IMAGE_BASE" "KEYCLOAK_IMAGE_TAG" REMOTE_OTHER "$KEYCLOAK_DISPLAY_NAME"
+}
+
+# Pull image from remote repo or use locally built image
+# arg: <pull-policy-override> <pull-policy-original>
+# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
+# <pull-policy-original> Shall be used for images that does not allow overriding
+# Both var may contain: 'remote', 'remote-remove' or 'local'
+__KEYCLOAK_imagepull() {
+ __check_and_pull_image $2 "$KEYCLOAK_DISPLAY_NAME" $KEYCLOAK_APP_NAME KEYCLOAK_IMAGE
+}
+
+# Build image (only for simulator or interfaces stubs owned by the test environment)
+# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
+# <image-tag-suffix> is present only for images with staging, snapshot,release tags
+__KEYCLOAK_imagebuild() {
+ echo -e $RED" Image for app KEYCLOAK shall never be built"$ERED
+}
+
+# Generate a string for each included image using the app display name and a docker images format string
+# If a custom image repo is used then also the source image from the local repo is listed
+# arg: <docker-images-format-string> <file-to-append>
+__KEYCLOAK_image_data() {
+ echo -e "$KEYCLOAK_DISPLAY_NAME\t$(docker images --format $1 $KEYCLOAK_IMAGE)" >> $2
+ if [ ! -z "$KEYCLOAK_IMAGE_SOURCE" ]; then
+ echo -e "-- source image --\t$(docker images --format $1 $KEYCLOAK_IMAGE_SOURCE)" >> $2
+ fi
+}
+
+# Scale kubernetes resources to zero
+# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
+# This function is called for apps fully managed by the test script
+__KEYCLOAK_kube_scale_zero() {
+ __kube_scale_all_resources $KUBE_KEYCLOAK_NAMESPACE autotest KEYCLOAK
+}
+
+# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
+# This function is called for prestarted apps not managed by the test script.
+__KEYCLOAK_kube_scale_zero_and_wait() {
+ echo -e $RED" KEYCLOAK app is not scaled in this state"$ERED
+}
+
+# Delete all kube resouces for the app
+# This function is called for apps managed by the test script.
+__KEYCLOAK_kube_delete_all() {
+ __kube_delete_all_resources $KUBE_KEYCLOAK_NAMESPACE autotest KEYCLOAK
+}
+
+# Store docker logs
+# This function is called for apps managed by the test script.
+# args: <log-dir> <file-prexix>
+__KEYCLOAK_store_docker_logs() {
+ if [ $RUNMODE == "KUBE" ]; then
+ kubectl $KUBECONF logs -l "autotest=KEYCLOAK" -n $KUBE_KEYCLOAK_NAMESPACE --tail=-1 > $1$2_keycloak.log 2>&1
+ else
+ docker logs $KEYCLOAK_APP_NAME > $1$2_keycloak.log 2>&1
+ fi
+}
+
+# Initial setup of protocol, host and ports
+# This function is called for apps managed by the test script.
+# args: -
+__KEYCLOAK_initial_setup() {
+ use_keycloak_http
+}
+
+# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
+# For docker, the namespace shall be excluded
+# This function is called for apps managed by the test script as well as for prestarted apps.
+# args: -
+__KEYCLOAK_statisics_setup() {
+ if [ $RUNMODE == "KUBE" ]; then
+ echo "KEYCLOAK $KEYCLOAK_APP_NAME $KUBE_KEYCLOAK_NAMESPACE"
+ else
+ echo "KEYCLOAK $KEYCLOAK_APP_NAME"
+ fi
+}
+
+# Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
+# args: -
+__KEYCLOAK_test_requirements() {
+ which jq > /dev/null
+ if [ $? -ne 0 ]; then
+ echo $RED" 'jq' is required to run tests. Pls install 'jq'"
+ return 1
+ fi
+}
+
+#######################################################
+
+# Set http as the protocol to use for all communication to the Keycloak
+# args: -
+# (Function for test scripts)
+use_keycloak_http() {
+ __keycloak_set_protocoll "http" $KEYCLOAK_INTERNAL_PORT $KEYCLOAK_EXTERNAL_PORT
+}
+
+# Set https as the protocol to use for all communication to the Keycloak
+# args: -
+# (Function for test scripts)
+use_keycloak_https() {
+ __keycloak_set_protocoll "https" $KEYCLOAK_INTERNAL_SECURE_PORT $KEYCLOAK_EXTERNAL_SECURE_PORT
+}
+
+# Setup paths to svc/container for internal and external access
+# args: <protocol> <internal-port> <external-port>
+__keycloak_set_protocoll() {
+ echo -e $BOLD"$KEYCLOAK_DISPLAY_NAME protocol setting"$EBOLD
+ echo -e " Using $BOLD $1 $EBOLD towards $KEYCLOAK_DISPLAY_NAME"
+
+ ## Access to Keycloak
+
+ KEYCLOAK_SERVICE_PATH=$1"://"$KEYCLOAK_APP_NAME":"$2 # docker access, container->container and script->container via proxy
+ KEYCLOAK_SERVICE_PORT=$2
+ KEYCLOAK_SERVICE_HOST=$KEYCLOAK_APP_NAME
+ KEYCLOAK_ISSUER_PATH=$1"://"$KEYCLOAK_APP_NAME
+ if [ $RUNMODE == "KUBE" ]; then
+ KEYCLOAK_SERVICE_PATH=$1"://"$KEYCLOAK_APP_NAME.$KUBE_KEYCLOAK_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
+ KEYCLOAK_SERVICE_PORT=$3
+ KEYCLOAK_SERVICE_HOST=$KEYCLOAK_APP_NAME.$KUBE_KEYCLOAK_NAMESPACE
+ KEYCLOAK_ISSUER_PATH=$1"://"$KEYCLOAK_APP_NAME.$KUBE_KEYCLOAK_NAMESPACE
+ fi
+ KEYCLOAK_SERVICE_HTTPX=$1
+
+ echo ""
+}
+
+### Admin API functions Keycloak
+
+###########################
+### Keycloak functions
+###########################
+
+# Export env vars for config files, docker compose and kube resources
+# args:
+__keycloak_export_vars() {
+ export KEYCLOAK_APP_NAME
+ export KEYCLOAK_DISPLAY_NAME
+
+ export DOCKER_SIM_NWNAME
+ export KUBE_KEYCLOAK_NAMESPACE
+
+ export KEYCLOAK_IMAGE
+ export KEYCLOAK_INTERNAL_PORT
+ export KEYCLOAK_EXTERNAL_PORT
+
+ export KEYCLOAK_ADMIN_USER
+ export KEYCLOAK_ADMIN_PWD
+ export KEYCLOAK_KC_PROXY
+}
+
+
+# Start the Keycloak in the simulator group
+# args: -
+# (Function for test scripts)
+start_keycloak() {
+
+ echo -e $BOLD"Starting $KEYCLOAK_DISPLAY_NAME"$EBOLD
+
+ if [ $RUNMODE == "KUBE" ]; then
+
+ # Check if app shall be fully managed by the test script
+ __check_included_image "KEYCLOAK"
+ retcode_i=$?
+
+ # Check if app shall only be used by the testscipt
+ __check_prestarted_image "KEYCLOAK"
+ retcode_p=$?
+
+ if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
+ echo -e $RED"The $KEYCLOAK_NAME app is not included as managed nor prestarted in this test script"$ERED
+ echo -e $RED"The $KEYCLOAK_APP_NAME will not be started"$ERED
+ exit
+ fi
+ if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
+ echo -e $RED"The $KEYCLOAK_APP_NAME app is included both as managed and prestarted in this test script"$ERED
+ echo -e $RED"The $KEYCLOAK_APP_NAME will not be started"$ERED
+ exit
+ fi
+
+ if [ $retcode_p -eq 0 ]; then
+ echo -e " Using existing $KEYCLOAK_APP_NAME deployment and service"
+ echo " Setting keycloak replicas=1"
+ __kube_scale deployment $KEYCLOAK_APP_NAME $KUBE_KEYCLOAK_NAMESPACE 1
+ fi
+
+ if [ $retcode_i -eq 0 ]; then
+ echo -e " Creating $KEYCLOAK_APP_NAME deployment and service"
+
+ __kube_create_namespace $KUBE_KEYCLOAK_NAMESPACE
+
+ __keycloak_export_vars
+
+ # Create service and app
+ input_yaml=$SIM_GROUP"/"$KEYCLOAK_COMPOSE_DIR"/"svc_app.yaml
+ output_yaml=$PWD/tmp/keycloak_svc_app.yaml
+ __kube_create_instance "service/app" $KEYCLOAK_APP_NAME $input_yaml $output_yaml
+
+ fi
+
+ __check_service_start $KEYCLOAK_APP_NAME $KEYCLOAK_SERVICE_PATH$KEYCLOAK_ALIVE_URL
+ else
+
+ # Check if docker app shall be fully managed by the test script
+ __check_included_image 'KEYCLOAK'
+ if [ $? -eq 1 ]; then
+ echo -e $RED"The Keycloak app is not included as managed in this test script"$ERED
+ echo -e $RED"The Keycloak will not be started"$ERED
+ exit
+ fi
+
+ __keycloak_export_vars
+
+ __start_container $KEYCLOAK_COMPOSE_DIR "" NODOCKERARGS 1 $KEYCLOAK_APP_NAME
+
+ __check_service_start $KEYCLOAK_APP_NAME $KEYCLOAK_SERVICE_PATH$KEYCLOAK_ALIVE_URL
+ fi
+ echo ""
+ return 0
+}
+
+# Excute a curl cmd towards the keycloak and check the response code is 2XX.
+# args: <curl-cmd-string>
+# resp: <returned-payload> if return code is 0 otherwise <error-info>
+__execute_curl_to_keycloak() {
+
+ proxyflag=""
+ if [ ! -z "$KUBE_PROXY_PATH" ]; then
+ if [ $KUBE_PROXY_HTTPX == "http" ]; then
+ proxyflag=" --proxy $KUBE_PROXY_PATH"
+ else
+ proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
+ fi
+ fi
+ __cmd="curl -skw %{http_code} $proxyflag $1"
+ echo " CMD: $__cmd" >> $HTTPLOG
+ res=$($__cmd)
+ echo " RESP: $res" >> $HTTPLOG
+ retcode=$?
+ if [ $retcode -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when executing curl, response: "$retcode
+ echo "$res"
+ return 1
+ fi
+ status=${res:${#res}-3}
+ if [ $status -lt 200 ] && [ $status -gt 299 ]; then
+ __log_conf_fail_status_code "2XX" $status
+ echo "$res"
+ return 1
+ fi
+ echo ${res:0:${#res}-3}
+ return 0
+}
+
+# # Excute a curl cmd towards the keycloak and check the response code is 2XX.
+# # args: <command-file>
+# # resp: <returned-payload> if return code is 0 otherwise <error-info>
+# __execute_curl_to_keycloak2() {
+
+# # TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
+# # echo "(${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG
+# proxyflag=""
+# if [ ! -z "$KUBE_PROXY_PATH" ]; then
+# if [ $KUBE_PROXY_HTTPX == "http" ]; then
+# proxyflag=" --proxy $KUBE_PROXY_PATH"
+# else
+# proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
+# fi
+# fi
+# __cmd="curl -skw %{http_code} $proxyflag "$(< $1)
+# echo " CMD: $__cmd" >> $HTTPLOG
+# res=$(curl -skw %{http_code} $proxyflag $(< $1))
+# echo " RESP: $res" >> $HTTPLOG
+# retcode=$?
+# if [ $retcode -ne 0 ]; then
+# __log_conf_fail_general " Fatal error when executing curl, response: "$retcode
+# echo "$res"
+# return 1
+# fi
+# status=${res:${#res}-3}
+# if [ $status -lt 200 ] && [ $status -gt 299 ]; then
+# __log_conf_fail_status_code "2XX" $status
+# echo "$res"
+# return 1
+# fi
+# echo ${res:0:${#res}-3}
+# return 0
+# }
+
+# Excute a curl cmd towards the keycloak and check the response code is 2XX.
+# args: <operation> <url> <token> <json>
+# resp: <returned-payload> if return code is 0 otherwise <error-info>
+__execute_curl_to_keycloak2() {
+ proxyflag=""
+ if [ ! -z "$KUBE_PROXY_PATH" ]; then
+ if [ $KUBE_PROXY_HTTPX == "http" ]; then
+ proxyflag=" --proxy $KUBE_PROXY_PATH"
+ else
+ proxyflag=" --proxy-insecure --proxy $KUBE_PROXY_PATH"
+ fi
+ fi
+ if [ $1 == "POST" ]; then
+ if [ $# -eq 3 ]; then
+ echo curl -X POST -skw %{http_code} $proxyflag "$2" -H "Authorization: Bearer $3" >> $HTTPLOG
+ res=$(curl -X POST -skw %{http_code} $proxyflag "$2" -H "Authorization: Bearer $3")
+ retcode=$?
+ else
+ echo curl -X POST -skw %{http_code} $proxyflag "$2" -H "Content-Type: application/json" -H "Authorization: Bearer $3" --data-binary "$4" >> $HTTPLOG
+ res=$(curl -X POST -skw %{http_code} $proxyflag "$2" -H "Content-Type: application/json" -H "Authorization: Bearer $3" --data-binary "$4")
+ retcode=$?
+ fi
+ elif [ $1 == "PUT" ]; then
+ if [ $# -eq 3 ]; then
+ echo curl -X PUT -skw %{http_code} $proxyflag "$2" -H "Authorization: Bearer $3" >> $HTTPLOG
+ res=$(curl -X PUT -skw %{http_code} $proxyflag "$2" -H "Authorization: Bearer $3")
+ retcode=$?
+ else
+ echo curl -X PUT -skw %{http_code} $proxyflag "$2" -H "Content-Type: application/json" -H "Authorization: Bearer $3" --data-binary "$4" >> $HTTPLOG
+ res=$(curl -X PUT -skw %{http_code} $proxyflag "$2" -H "Content-Type: application/json" -H "Authorization: Bearer $3" --data-binary "$4")
+ retcode=$?
+ fi
+ elif [ $1 == "GET" ]; then
+ echo curl -X GET -skw %{http_code} $proxyflag "$2" -H "Authorization: Bearer $3" >> $HTTPLOG
+ res=$(curl -X GET -skw %{http_code} $proxyflag "$2" -H "Authorization: Bearer $3")
+ retcode=$?
+ fi
+ echo " RESP: $res" >> $HTTPLOG
+ if [ $retcode -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when executing curl, response: "$retcode
+ echo "$res"
+ return 1
+ fi
+ status=${res:${#res}-3}
+ if [ $status -lt 200 ] && [ $status -gt 299 ]; then
+ __log_conf_fail_status_code "2XX" $status
+ echo "$res"
+ return 1
+ fi
+ echo ${res:0:${#res}-3}
+ return 0
+}
+
+# Extract JWT access token from json structure
+# args: <json>
+__keycloak_decode_jwt() {
+ echo $1 | jq -r .access_token | jq -R 'split(".") | .[1] | @base64d | fromjson'
+ return 0
+}
+
+# Get the admin token to use for subsequent rest calls to keycloak
+# args: -
+keycloak_api_obtain_admin_token() {
+ __log_conf_start $@
+ __curl_string="-X POST $KEYCLOAK_SERVICE_PATH$KEYCLOAK_ADMIN_URL_PREFIX/protocol/openid-connect/token -H Content-Type:application/x-www-form-urlencoded -d username="$KEYCLOAK_ADMIN_USER" -d password="$KEYCLOAK_ADMIN_PWD" -d grant_type=password -d client_id="$KEYCLOAK_ADMIN_CLIENT
+ __TMP_TOKEN=$(__execute_curl_to_keycloak "$__curl_string")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when executing curl, response: "$?
+ return 1
+ fi
+
+ __KEYCLOAK_ADMIN_TOKEN=$(echo "$__TMP_TOKEN" | jq -r '.access_token')
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when extracting token, response: "$?
+ return 1
+ fi
+
+ echo "Decoded token:" >> $HTTPLOG
+ __keycloak_decode_jwt "$__TMP_TOKEN" >> $HTTPLOG
+
+ __KEYCLOAK_ADMIN_TOKEN_EXP=$(echo "$__TMP_TOKEN" | jq -r '.expires_in')
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when extracting expiry time, response: "$?
+ return 1
+ fi
+ echo " Admin token obtained. Expires in $__KEYCLOAK_ADMIN_TOKEN_EXP seconds"
+
+ __log_conf_ok
+ return 0
+}
+
+# Create a realm, name, enabled, expiry-time
+# args: <realm-name> true|false <token-expiry>
+keycloak_api_create_realm() {
+ __log_conf_start $@
+ __json='{"realm":"'$1'","enabled":'$2',"accessTokenLifespan":'$3'}'
+ res=$(__execute_curl_to_keycloak2 POST "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX" "$__KEYCLOAK_ADMIN_TOKEN" "$__json")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when creating realm, response: "$?
+ return 1
+ fi
+ __log_conf_ok
+ return 0
+}
+
+# Update a realm, name, enabled, expiry-time
+# args: <realm-name> true|false <token-expiry>
+keycloak_api_update_realm() {
+ __log_conf_start $@
+ __json='{"realm":"'$1'","enabled":'$2',"accessTokenLifespan":'$3'}'
+ res=$(__execute_curl_to_keycloak2 PUT "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1" "$__KEYCLOAK_ADMIN_TOKEN" "$__json")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when updating realm, response: "$?
+ return 1
+ fi
+ __log_conf_ok
+ return 0
+}
+
+# Create a client
+# args: <realm-name> <client-name>
+keycloak_api_create_confidential_client() {
+ __log_conf_start $@
+ __json='{"clientId":"'$2'","publicClient":false,"serviceAccountsEnabled": true,"rootUrl":"https://example.com/example/","adminUrl":"https://example.com/example/"}'
+ res=$(__execute_curl_to_keycloak2 POST "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients" "$__KEYCLOAK_ADMIN_TOKEN" "$__json")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when ucreating client, response: "$?
+ return 1
+ fi
+ __log_conf_ok
+ return 0
+}
+
+__keycloak_api_get_client_id() {
+ TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
+ echo "(${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG
+
+ res=$(__execute_curl_to_keycloak2 GET "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients?clientId=$2" "$__KEYCLOAK_ADMIN_TOKEN")
+ if [ $? -ne 0 ]; then
+ return 1
+ fi
+ echo $res | jq -r '.[0].id'
+ return 0
+}
+
+__keycloak_api_get_service_account_id() {
+ TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
+ echo "(${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG
+
+ res=$(__execute_curl_to_keycloak2 GET "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients$2/service-account-user" "$__KEYCLOAK_ADMIN_TOKEN")
+ if [ $? -ne 0 ]; then
+ return 1
+ fi
+ echo $res | jq -r '.[0].id'
+ return 0
+}
+
+# Generate secret for client
+# args: <realm-name> <client-name>
+keycloak_api_generate_client_secret() {
+ __log_conf_start $@
+ __c_id=$(__keycloak_api_get_client_id $1 $2)
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when getting client id, response: "$?
+ return 1
+ fi
+ res=$(__execute_curl_to_keycloak2 POST "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients/$__c_id/client-secret" "$__KEYCLOAK_ADMIN_TOKEN")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when generating client secret, response: "$?
+ return 1
+ fi
+ __c_sec=$(__execute_curl_to_keycloak2 GET "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients/$__c_id/client-secret" "$__KEYCLOAK_ADMIN_TOKEN")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when getting client secret, response: "$?
+ return 1
+ fi
+ __c_sec=$(echo $__c_sec | jq -r .value)
+ echo " Client id : $__c_id"
+ echo " Client secret: $__c_sec"
+ __log_conf_ok
+ return 0
+}
+
+# Get secret for client
+# args: <realm-name> <client-name>
+keycloak_api_get_client_secret() {
+ __log_conf_start $@
+ __c_id=$(__keycloak_api_get_client_id $1 $2)
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when getting client id, response: "$?
+ return 1
+ fi
+ __c_sec=$(__execute_curl_to_keycloak2 GET "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients/$__c_id/client-secret" "$__KEYCLOAK_ADMIN_TOKEN")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when getting client secret, response: "$?
+ return 1
+ fi
+ __c_sec=$(echo $__c_sec | jq -r .value)
+ echo " Client id : $__c_id"
+ echo " Client secret: $__c_sec"
+ __log_conf_ok
+ return 0
+}
+
+# Create client roles
+# args: <realm-name> <client-name> <role>+
+keycloak_api_create_client_roles() {
+ __log_conf_start $@
+ __c_id=$(__keycloak_api_get_client_id $1 $2)
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when getting client id, response: "$?
+ return 1
+ fi
+ __realm=$1
+ shift; shift;
+ while [ $# -gt 0 ]; do
+ __json='{"name":"'$1'"}'
+ res=$(__execute_curl_to_keycloak2 POST "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$__realm/clients/$__c_id/roles" "$__KEYCLOAK_ADMIN_TOKEN" "$__json")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when creating client role, response: "$?
+ return 1
+ fi
+ shift
+ done
+ __log_conf_ok
+ return 0
+}
+
+# Get a client token
+# args: <realm-name> <client-name>
+keycloak_api_get_client_token() {
+ __log_conf_start $@
+ __c_id=$(__keycloak_api_get_client_id $1 $2)
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when getting client id, response: "$?
+ return 1
+ fi
+ __c_sec=$(__execute_curl_to_keycloak2 GET "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients/$__c_id/client-secret" "$__KEYCLOAK_ADMIN_TOKEN")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when getting client secret, response: "$?
+ return 1
+ fi
+ __c_sec=$(echo $__c_sec | jq -r .value)
+ __curl_string="-X POST $KEYCLOAK_SERVICE_PATH$KEYCLOAK_TOKEN_URL_PREFIX/$1/protocol/openid-connect/token -H Content-Type:application/x-www-form-urlencoded -d client_id="$2" -d client_secret="$__c_sec" -d grant_type=client_credentials"
+ __TMP_TOKEN=$(__execute_curl_to_keycloak "$__curl_string")
+ if [ $? -ne 0 ]; then
+ __log_conf_fail_general " Fatal error when getting client token, response: "$?
+ return 1
+ fi
+ echo $__TMP_TOKEN| jq -r .access_token
+ __log_conf_ok
+ return 0
+}
+
+# Read a client token
+# args: <realm-name> <client-name>
+keycloak_api_read_client_token() {
+ TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
+ echo "(${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG
+ __c_id=$(__keycloak_api_get_client_id $1 $2)
+ if [ $? -ne 0 ]; then
+ echo "<error-no-token>"
+ return 1
+ fi
+ __c_sec=$(__execute_curl_to_keycloak2 GET "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients/$__c_id/client-secret" "$__KEYCLOAK_ADMIN_TOKEN")
+ if [ $? -ne 0 ]; then
+ echo "<error-no-token>"
+ return 1
+ fi
+ __c_sec=$(echo $__c_sec | jq -r .value)
+ __curl_string="-X POST $KEYCLOAK_SERVICE_PATH$KEYCLOAK_TOKEN_URL_PREFIX/$1/protocol/openid-connect/token -H Content-Type:application/x-www-form-urlencoded -d client_id="$2" -d client_secret="$__c_sec" -d grant_type=client_credentials"
+ __TMP_TOKEN=$(__execute_curl_to_keycloak "$__curl_string")
+ if [ $? -ne 0 ]; then
+ echo "<error-no-token>"
+ return 1
+ fi
+ echo $__TMP_TOKEN| jq -r .access_token
+ return 0
+}
+
+# Read secret for client
+# args: <realm-name> <client-name>
+keycloak_api_read_client_secret() {
+ TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
+ echo "(${BASH_LINENO[0]}) - ${TIMESTAMP}: ${FUNCNAME[0]}" $@ >> $HTTPLOG
+ __c_id=$(__keycloak_api_get_client_id $1 $2)
+ if [ $? -ne 0 ]; then
+ echo "<error-no-secret>"
+ return 1
+ fi
+ __c_sec=$(__execute_curl_to_keycloak2 GET "$KEYCLOAK_SERVICE_PATH$KEYCLOAK_REALM_URL_PREFIX/$1/clients/$__c_id/client-secret" "$__KEYCLOAK_ADMIN_TOKEN")
+ if [ $? -ne 0 ]; then
+ echo "<error-no-secret>"
+ return 1
+ fi
+ __c_sec=$(echo $__c_sec | jq -r .value)
+ echo $__c_sec
+ return 0
+}
\ No newline at end of file