X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=test%2Funit_test.ksh;h=575c1d85611ede7bb9753ae5a4e43e1793ed67b4;hb=8c6756d9d6f94beca0bc382f97383ca5e79d16c7;hp=7b5d6a8e084240b80315e4307125cf486fb72ea7;hpb=69e742d1b1c2c29c8cc2a8f54df2dbe91a7f08aa;p=ric-plt%2Flib%2Frmr.git diff --git a/test/unit_test.ksh b/test/unit_test.ksh index 7b5d6a8..575c1d8 100755 --- a/test/unit_test.ksh +++ b/test/unit_test.ksh @@ -1,5 +1,5 @@ #!/usr/bin/env ksh -# this will fail if run with bash! +# this has been hacked to work with bash; ksh is preferred #================================================================================== # Copyright (c) 2019 Nokia @@ -63,13 +63,17 @@ # ------------------------------------------------------------------------- function usage { - echo "usage: $0 [-G|-M|-C custom-command-string] [-c cov-target] [-f] [-F] [-v] [-x] [files]" + echo "usage: $0 [-G|-M|-C custom-command-string] [-a] [-c cov-target] [-f] [-F] [-v] [-x] [files]" echo " if -C is used to provide a custom build command then it must " echo " contain a %s which will be replaced with the unit test file name." echo ' e.g.: -C "mk -a %s"' + echo " -a always run coverage (even on failed modules)" echo " -c allows user to set the target coverage for a module to pass; default is 80" echo " -f forces a discount check (normally done only if coverage < target)" echo " -F show only failures at the function level" + echo " -Q turns off quiet mode. Quiet mode (default) is less chatty about intermediate" + echo " coverage results and test programme output when failures detected" + echo " -q enable quiet mode (default, so this is no longer needed)" echo " -s strict mode; code coverage must also pass to result in a good exit code" echo " -v will write additional information to the tty and save the disccounted file if discount run or -f given" echo " -x generates the coverage XML files for Sonar (implies -f)" @@ -81,19 +85,25 @@ function usage { function add_ignored_func { if [[ ! -r $1 ]] then + echo ">>>> can't find file to ignore: $1" return fi typeset f="" - grep "^static.*(.*).*{" $1 | awk ' # get list of test functions to ignore - { - gsub( "[(].*", "" ) - print $3 - } - ' | while read f - do - iflist="${iflist}$f " - done + goop=$( + grep "^static.*(.*).*{" $1 | awk ' # get list of test functions to ignore + { + gsub( "[(].*", "" ) + gsub( "[*]", "" ) + if( $2 == "struct" ) { # static struct goober function + printf( "%s ", $4 ) + } else { + printf( "%s ", $3 ) # static goober-type funct + } + } + ' ) + + iflist="$iflist $goop" # this goop hack because bash can't read from a loop } @@ -183,7 +193,7 @@ function discount_an_checks { } } - /-:/ { # skip unexecutable lines + /-:/ { # skip unexecutable lines spit_line() seq++ # allow blank lines in a sequence group next @@ -208,7 +218,6 @@ function discount_an_checks { #printf( "allow discount: %s\n", $0 ) if( replace_flags ) { gsub( "#####", " 1", $0 ) - //gsub( "#####", "=====", $0 ) } discount++; } @@ -285,7 +294,8 @@ function get_mct { if [[ -f ./.targets ]] then - grep "^$1 " ./.targets | head -1 | read junk tv + grep "^$1 " ./.targets | head -1 | read stuff + tv="${stuff##* }" # assume junk tv; ditch junk fi echo ${tv:-$v} @@ -304,35 +314,49 @@ function mk_xml { # ----------------------------------------------------------------------------------------------------------------- -# we assume that the project has been built in the ../[.]build directory -if [[ -d ../build ]] +if [[ -z $BUILD_PATH ]] then - export LD_LIBRARY_PATH=../build/lib:../build/lib64 -else - if [[ -d ../.build ]] - then - export LD_LIBRARY_PATH=../.build/lib:../.build/lib64 - export C_INCLUDE_PATH=../.build/include + # we assume that the project has been built in the ../[.]build directory + if [[ -d ../build ]] + then + export BUILD_PATH=../build else - echo "[WARN] cannot find build directory (tried ../build and ../.build); things might not work" - echo "" + if [[ -d ../.build ]] + then + export BUILD_PATH=../.build + else + echo "[WARN] cannot find build directory (tried ../build and ../.build); things might not work" + echo "" + fi fi fi +export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$BUILD_PATH/lib:$BUILD_PATH/lib64 +export C_INCLUDE_PATH=$C_INCLUDE_PATH:$BUILD_PATH/include export LIBRARY_PATH=$LD_LIBRARY_PATH -export C_INCLUDE_PATH="../src/rmr/common/include:$C_INCLUDE_PATH" +# The Makefile sets specific includes for things +#export C_INCLUDE_PATH="../src/rmr/common/include:../src/rmr/si/include:$C_INCLUDE_PATH" module_cov_target=80 -builder="make -B %s" # default to plain ole make +builder="make -B %s" # default to plain ole make verbose=0 -show_all=1 # show all things -F sets to show failures only -strict=0 # -s (strict) will set; when off, coverage state ignored in final pass/fail -show_output=0 # show output from each test execution (-S) -quiet=0 +show_all=1 # show all things -F sets to show failures only +strict=0 # -s (strict) will set; when off, coverage state ignored in final pass/fail +show_output=0 # show output from each test execution (-S) +quiet=1 # less chatty with result output (only overall coverage, no intermediate coverage) -Q turns off gen_xml=0 -replace_flags=1 # replace ##### in gcov for discounted lines +replace_flags=1 # replace ##### in gcov for discounted lines +run_nano_tests=0 # can nolonger be turned on +run_nng_tests=0 # -N will enable +always_gcov=0 # -a sets to always run gcov even if failure +save_gcov=1 # -o turns this off +out_dir=${UT_COVERAGE_DIR:-/tmp/rmr_gcov} # -O changes output directory + +export RMR_WARNING=1 # turn on warnings + +ulimit -c unlimited while [[ $1 == "-"* ]] do @@ -340,27 +364,35 @@ do -C) builder="$2"; shift;; # custom build command -G) builder="gmake %s";; -M) builder="mk -a %s";; # use plan-9 mk (better, but sadly not widly used) + -N) run_nng_tests=1;; + -O) out_dir=$2; shift;; + -a) always_gcov=1;; -c) module_cov_target=$2; shift;; + -e) capture_file=$2; >$capture_file; shift;; # capture errors from failed tests rather than spewing on tty -f) force_discounting=1; trigger_discount_str="WARN|FAIL|PASS" # check all outcomes for each module ;; -F) show_all=0;; + -n) noexec=1;; + -o) save_gcov=0;; -s) strict=1;; # coverage counts toward pass/fail state -S) show_output=1;; # test output shown even on success -v) (( verbose++ ));; -q) quiet=1;; # less chatty when spilling error log files + -Q) quiet=0;; # disable quiet mode -x) gen_xml=1 force_discounting=1 trigger_discount_str="WARN|FAIL|PASS" # check all outcomes for each module rm -fr *cov.xml ;; - -h) usage; exit 0;; + + -h) usage; exit 0;; --help) usage; exit 0;; - -\?) usage; exit 0;; + -\?) usage; exit 0;; *) echo "unrecognised option: $1" >&2 usage >&2 @@ -372,7 +404,7 @@ do done -if (( strict )) # if in strict mode, coverage shortcomings are failures +if (( strict )) # if in strict mode, coverage shortcomings are failures then cfail="FAIL" else @@ -391,6 +423,19 @@ then do if [[ $tfile != *"static_test.c" ]] then + if (( ! run_nng_tests )) && [[ $tfile == *"nng"* ]] # drop any nng file unless -N given + then + continue + fi + if [[ $tfile == *"nano"* ]] # no longer support nano tests; drop regardless + then + continue + fi + + if (( ! quiet )) + then + echo " add test: $tfile" >&2 + fi flist="${flist}$tfile " fi done @@ -398,11 +443,25 @@ else flist="$@" fi +if (( noexec )) +then + echo "no exec mode; would test these:" + for tf in $flist + do + echo " $tf" + done + exit 0 +fi rm -fr *.gcov # ditch the previous coverage files ut_errors=0 # unit test errors (not coverage errors) errors=0 +if ! touch /tmp/PPID$$.noise +then + echo " unable to write to /tmp???" +fi + for tfile in $flist do for x in *.gcov @@ -414,176 +473,210 @@ do done echo "$tfile --------------------------------------" - bcmd=$( printf "$builder" "${tfile%.c}" ) - if ! $bcmd >/tmp/PID$$.log 2>&1 - then - echo "[FAIL] cannot build $tfile" - cat /tmp/PID$$.log - rm -f /tmp/PID$$ - exit 1 - fi - - iflist="main sig_clean_exit " # ignore external functions from our tools - add_ignored_func $tfile # ignore all static functions in our test driver - add_ignored_func test_support.c # ignore all static functions in our test tools - add_ignored_func test_nng_em.c # the nng/nano emulated things - for f in *_static_test.c # all static modules here - do - add_ignored_func $f - done - - if ! ./${tfile%.c} >/tmp/PID$$.log 2>&1 - then - echo "[FAIL] unit test failed for: $tfile" - if (( quiet )) + ( # all noise is now captured into a tmp file to support quiet mode + bcmd=$( printf "$builder" "${tfile%.c}" ) + if ! $bcmd >/tmp/PID$$.log 2>&1 then - grep "^<" /tmp/PID$$.log # in quiet mode just dump <...> messages which are assumed from the test programme not appl - else + echo "[FAIL] cannot build $tfile" cat /tmp/PID$$.log + # do NOT remove tmp files; bash seens to not gen a new PID for subshells + exit 1 fi - (( ut_errors++ )) # cause failure even if not in strict mode - continue # skip coverage tests for this - else - if (( show_output )) + + iflist="main sig_clean_exit " # ignore external functions from our tools + add_ignored_func $tfile # ignore all static functions in our test driver + add_ignored_func test_support.c # ignore all static functions in our test tools + add_ignored_func test_nng_em.c # the nng/nano emulated things + add_ignored_func test_si95_em.c # the si emulated things + add_ignored_func test_common_em.c # the common emulation functions + for f in *_static_test.c # all static modules here + do + if(( ! run_nano_tests )) && [[ $f == *"nano"* ]] + then + continue + fi + + add_ignored_func $f + done + + if ! ./${tfile%.c} >/tmp/PID$$.log 2>&1 then - printf "\n============= test programme output =======================\n" - cat /tmp/PID$$.log - printf "===========================================================\n" + echo "[FAIL] unit test failed for: $tfile" + if [[ -n $capture_file ]] + then + echo "all errors captured in $capture_file, listing only fail message on tty" + echo "$tfile --------------------------------------" >>$capture_file + cat /tmp/PID$$.log >>$capture_file + grep "^" /tmp/PID$$.log + echo "" + else + if (( quiet )) + then + grep "^<" /tmp/PID$$.log|egrep -v "^|^" # in quiet mode just dump <...> messages which are assumed from the test programme not appl + else + cat /tmp/PID$$.log + fi + fi + (( ut_errors++ )) # cause failure even if not in strict mode + if (( ! always_gcov )) + then + exit 1 # we are in a subshell, must exit bad + fi + else + if (( show_output )) + then + printf "\n============= test programme output =======================\n" + cat /tmp/PID$$.log + printf "===========================================================\n" + else + grep "SUMMARY" /tmp/PID$$.log + fi fi - fi - - ( - touch ./.targets - sed '/^#/ d; /^$/ d; s/^/TARGET: /' ./.targets - gcov -f ${tfile%.c} | sed "s/'//g" - ) | awk \ - -v cfail=$cfail \ - -v show_all=$show_all \ - -v ignore_list="$iflist" \ - -v module_cov_target=$module_cov_target \ - -v chatty=$verbose \ - ' - BEGIN { - announce_target = 1; - nignore = split( ignore_list, ignore, " " ) - for( i = 1; i <= nignore; i++ ) { - imap[ignore[i]] = 1 - } - exit_code = 0 # assume good - } + ( + touch ./.targets + sed '/^#/ d; /^$/ d; s/^/TARGET: /' ./.targets + gcov -f ${tfile%.c} | sed "s/'//g" + ) | awk \ + -v cfail=$cfail \ + -v show_all=$show_all \ + -v ignore_list="$iflist" \ + -v module_cov_target=$module_cov_target \ + -v chatty=$verbose \ + ' + BEGIN { + announce_target = 1; + nignore = split( ignore_list, ignore, " " ) + for( i = 1; i <= nignore; i++ ) { + imap[ignore[i]] = 1 + } - /^TARGET:/ { - if( NF > 1 ) { - target[$2] = $NF + exit_code = 0 # assume good } - next; - } - - /File.*_test/ || /File.*test_/ { # dont report on test files - skip = 1 - file = 1 - fname = $2 - next - } - /File/ { - skip = 0 - file = 1 - fname = $2 - next - } + /^TARGET:/ { + if( NF > 1 ) { + target[$2] = $NF + } + next; + } - /Function/ { - fname = $2 - file = 0 - if( imap[fname] ) { - fname = "skipped: " fname # should never see and make it smell if we do + /File.*_test/ || /File.*test_/ { # dont report on test files skip = 1 - } else { + file = 1 + fname = $2 + next + } + + /File/ { skip = 0 + file = 1 + fname = $2 + next } - next - } - skip { next } + /Function/ { + fname = $2 + file = 0 + if( imap[fname] ) { + fname = "skipped: " fname # should never see and make it smell if we do + skip = 1 + } else { + skip = 0 + } + next + } - /Lines executed/ { - split( $0, a, ":" ) - pct = a[2]+0 + skip { next } - if( file ) { - if( announce_target ) { # announce default once at start - announce_target = 0; - printf( "\n[INFO] default target coverage for modules is %d%%\n", module_cov_target ) - } + /Lines executed/ { + split( $0, a, ":" ) + pct = a[2]+0 - if( target[fname] ) { - mct = target[fname] - announce_target = 1; - } else { - mct = module_cov_target - } + if( file ) { + if( announce_target ) { # announce default once at start + announce_target = 0; + printf( "\n[INFO] default target coverage for modules is %d%%\n", module_cov_target ) + } - if( announce_target ) { # annoucne for module if different from default - printf( "[INFO] target coverage for %s is %d%%\n", fname, mct ) - } + if( target[fname] ) { + mct = target[fname] + announce_target = 1; + } else { + mct = module_cov_target + } - if( pct < mct ) { - printf( "[%s] %3d%% %s\n", cfail, pct, fname ) # CAUTION: write only 3 things here - exit_code = 1 - } else { - printf( "[PASS] %3d%% %s\n", pct, fname ) - } + if( announce_target ) { # annoucne for module if different from default + printf( "[INFO] target coverage for %s is %d%%\n", fname, mct ) + } - announce_target = 0; - } else { - if( pct < 70 ) { - printf( "[LOW] %3d%% %s\n", pct, fname ) + if( pct < mct ) { + printf( "[%s] %3d%% %s\n", cfail, pct, fname ) # CAUTION: write only 3 things here + exit_code = 1 + } else { + printf( "[PASS] %3d%% %s\n", pct, fname ) + } + + announce_target = 0; } else { - if( pct < 80 ) { - printf( "[MARG] %3d%% %s\n", pct, fname ) + if( pct < 70 ) { + printf( "[LOW] %3d%% %s\n", pct, fname ) } else { - if( show_all ) { - printf( "[OK] %3d%% %s\n", pct, fname ) + if( pct < 80 ) { + printf( "[MARG] %3d%% %s\n", pct, fname ) + } else { + if( show_all ) { + printf( "[OK] %3d%% %s\n", pct, fname ) + } } } } } - } - - END { - printf( "\n" ); - exit( exit_code ) - } - ' >/tmp/PID$$.log # capture output to run discount on failures - rc=$? - cat /tmp/PID$$.log + END { + printf( "\n" ); + exit( exit_code ) + } + ' >/tmp/PID$$.log # capture output to run discount on failures + rc=$? + cat /tmp/PID$$.log - if (( rc || force_discounting )) # didn't pass, or forcing, see if discounting helps - then - if (( ! verbose )) + if (( rc || force_discounting )) # didn't pass, or forcing, see if discounting helps then - echo "[INFO] checking to see if discounting improves coverage for failures listed above" - fi - - egrep "$trigger_discount_str" /tmp/PID$$.log | while read state junk name - do - if ! discount_an_checks $name.gcov >/tmp/PID$$.disc + if (( ! verbose )) # if verbose is on we don't need this (! is not a mistake!!) then - (( errors++ )) + echo "[INFO] checking to see if discounting improves coverage for failures listed above" fi - tail -1 /tmp/PID$$.disc | grep '\[' + # preferred, but breaks under bash + #egrep "$trigger_discount_str" /tmp/PID$$.log | while read state junk name + egrep "$trigger_discount_str" /tmp/PID$$.log | while read stuff + do + set stuff # this hack required because bash cant read into mult vars + state="$1" + name="$3" - if (( verbose > 1 )) # updated file was generated, keep here - then - echo "[INFO] discounted coverage info in: ${tfile##*/}.dcov" - fi + if ! discount_an_checks $name.gcov >/tmp/PID$$.disc + then + (( errors++ )) + fi - mv /tmp/PID$$.disc ${name##*/}.dcov - done + tail -1 /tmp/PID$$.disc | grep '\[' + + if (( verbose > 1 )) # updated file was generated, keep here + then + echo "[INFO] discounted coverage info in: ${tfile##*/}.dcov" + fi + + mv /tmp/PID$$.disc ${name##*/}.dcov + done + fi + )>/tmp/PID$$.noise 2>&1 + if (( $? != 0 )) + then + (( ut_errors++ )) + cat /tmp/PID$$.noise + continue fi for x in *.gcov # merge any previous coverage file with this one @@ -595,6 +688,13 @@ do rm $x- fi done + + if (( ! quiet )) + then + cat /tmp/PID$$.noise + else + grep "SUMMARY" /tmp/PID$$.noise + fi done echo "" @@ -605,11 +705,39 @@ do if [[ $xx != *"test"* ]] then of=${xx%.gcov}.dcov - discount_an_checks $xx >$of - tail -1 $of | grep '\[' + discount_an_checks $xx >$of + if [[ -n $of ]] + then + tail -1 $of | grep '\[' + fi fi done +if (( save_gcov )) +then + echo "" + ok=1 + if [[ ! -d $outdir ]] + then + if ! mkdir -p $out_dir + then + echo "[WARN] unable to save .gcov files in $out_dir" + ok=0 + fi + fi + + if (( ok )) + then + rm -fr $out_dir/* + echo "[INFO] gcov files saved in $out_dir for push to remote system(s)" + cp *.gcov $out_dir/ + rm -f $out_dir/*_test.c.gcov $out_dir/test_*.c.gcov + rm -f ./*_test.c.gcov ./test_*.c.gcov + fi +else + echo "[INFO] .gcov files were not saved for remote system" +fi + state=0 # final state rm -f /tmp/PID$$.* if (( strict )) # fail if some coverage failed too @@ -625,6 +753,16 @@ else # not strict; fail only if unit tests themselves failed fi fi +# finally run any "vetters" which run programmes and analyse the output +echo "[INFO] running vetters...." +if ! make vet +then + echo "[FAIL] one or more vetters failed" + state=1 +else + echo "[INFO] vetters all passed" +fi + echo"" if (( state )) then @@ -636,5 +774,6 @@ else mk_xml fi fi + exit $state