X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=test%2Fcommon%2Ftest_env-onap-guilin.sh;h=0895947d46af1e006302a50b985026f9fe7039bb;hb=cb28fdff6d977773c123db418ab0b5f6861f5335;hp=51eab6982ac1d9ad482875ea3a66b349e8ebd074;hpb=803d48989d7824309602393763142320cdbbc0d2;p=nonrtric.git diff --git a/test/common/test_env-onap-guilin.sh b/test/common/test_env-onap-guilin.sh old mode 100644 new mode 100755 index 51eab698..0895947d --- a/test/common/test_env-onap-guilin.sh +++ b/test/common/test_env-onap-guilin.sh @@ -7,7 +7,7 @@ # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # -# http://www.apache.org/licenses/LICENSE-2.0 +# http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, @@ -16,135 +16,293 @@ # limitations under the License. # ============LICENSE_END================================================= # - +#Profile for ONAP guilin release TEST_ENV_PROFILE="ONAP-GUILIN" - -# Set up the image and tags for the test. Do not add the image tag to the image names. - -# NOTE: A env var for each container is created by the test script. -# This var will point to the local or remote var depending on how -# the test script is started. The name format is _IMAGE, ie with 'LOCAL' or 'REMOTE'. - -# Tag for guilin branch -# Remote Policy Agent image and tag -POLICY_AGENT_REMOTE_IMAGE="nexus3.onap.org:10003/onap/ccsdk-oran-a1policymanagementservice" -POLICY_AGENT_REMOTE_IMAGE_TAG="1.0.1-SNAPSHOT" +FLAVOUR="ONAP" + +######################################## +## Nexus repo settings +######################################## + +# Nexus repos for developed images +NEXUS_PROXY_REPO="nexus3.onap.org:10001/" +NEXUS_RELEASE_REPO="nexus3.onap.org:10002/" +NEXUS_SNAPSHOT_REPO="nexus3.onap.org:10003/" +NEXUS_STAGING_REPO=$NEXUS_SNAPSHOT_REPO #staging repo not used in ONAP, using snapshot + +# Nexus repos for images used by test (not developed by the project) +NEXUS_RELEASE_REPO_ORAN="nexus3.o-ran-sc.org:10002/" # Only for released ORAN images +NEXUS_RELEASE_REPO_ONAP=$NEXUS_RELEASE_REPO + +######################################## +# Set up of image and tags for the test. +######################################## + +# NOTE: One environment variable containing the image name and tag is create by the test script +# for each image from the env variables below. +# The variable is created by removing the suffix "_BASE" from the base image variable name. +# Example: POLICY_AGENT_IMAGE_BASE -> POLICY_AGENT_IMAGE +# This var will point to the local or remote image depending on cmd line arguments. +# In addition, the repo and the image tag version are selected from the list of image tags based on the cmd line argurment. +# For images built by the script, only tag #1 shall be specified +# For project images, only tag #1, #2, #3 and #4 shall be specified +# For ORAN images (non project), only tag #5 shall be specified +# For ONAP images (non project), only tag #6 shall be specified +# For all other images, only tag #7 shall be specified +# 1 XXX_LOCAL: local images: : +# 2 XXX_REMOTE_SNAPSHOT: snapshot images: : +# 3 XXX_REMOTE: staging images: : +# 4 XXX_REMOTE_RELEASE: release images: : +# 5 XXX_REMOTE_RELEASE_ORAN: ORAN release images: : +# 6 XXX_REMOTE_RELEASE_ONAP: ONAP release images: : +# 7 XXX_PROXY: other images, not produced by the project: : + + +# Policy Agent image and tags +POLICY_AGENT_IMAGE_BASE="onap/ccsdk-oran-a1policymanagementservice" +POLICY_AGENT_IMAGE_TAG_LOCAL="1.0.2-SNAPSHOT" +POLICY_AGENT_IMAGE_TAG_REMOTE_SNAPSHOT="1.0.2-SNAPSHOT" +POLICY_AGENT_IMAGE_TAG_REMOTE="1.0.2-SNAPSHOT" #Will use snapshot repo +POLICY_AGENT_IMAGE_TAG_REMOTE_RELEASE="1.0.2" -# Control Panel remote image and tag -CONTROL_PANEL_REMOTE_IMAGE="nexus3.o-ran-sc.org:10004/o-ran-sc/nonrtric-controlpanel" -CONTROL_PANEL_REMOTE_IMAGE_TAG="2.0.0" - # Tag for guilin branch # SDNC A1 Controller remote image and tag -SDNC_A1_CONTROLLER_REMOTE_IMAGE="nexus3.onap.org:10003/onap/sdnc-image" -SDNC_A1_CONTROLLER_REMOTE_IMAGE_TAG="2.0.2-STAGING-latest" +SDNC_A1_CONTROLLER_IMAGE_BASE="onap/sdnc-image" +SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE_SNAPSHOT="2.0.5-STAGING-latest" +SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE="2.0.5-STAGING-latest" +SDNC_A1_CONTROLLER_IMAGE_TAG_REMOTE_RELEASE="2.0.4" #Will use snapshot repo #SDNC DB remote image and tag -SDNC_DB_REMOTE_IMAGE="mysql/mysql-server" -SDNC_DB_REMOTE_IMAGE_TAG="5.6" -#No local image for DB, remote image always used +#The DB is part of SDNC so handled in the same way as SDNC +SDNC_DB_IMAGE_BASE="mysql/mysql-server" +SDNC_DB_IMAGE_TAG_REMOTE_PROXY="5.6" + + +# Control Panel image and tag - uses bronze release +CONTROL_PANEL_IMAGE_BASE="o-ran-sc/nonrtric-controlpanel" +CONTROL_PANEL_IMAGE_TAG_REMOTE_RELEASE_ORAN="2.0.0" -# Near RT RIC Simulator remote image and tag -RIC_SIM_REMOTE_IMAGE="nexus3.o-ran-sc.org:10004/o-ran-sc/a1-simulator" -RIC_SIM_REMOTE_IMAGE_TAG="2.0.0" +# Near RT RIC Simulator image and tags - uses bronze release +RIC_SIM_IMAGE_BASE="o-ran-sc/a1-simulator" +RIC_SIM_IMAGE_TAG_REMOTE_RELEASE_ORAN="2.0.0" #Consul remote image and tag -CONSUL_REMOTE_IMAGE="consul" -CONSUL_REMOTE_IMAGE_TAG="1.7.2" +CONSUL_IMAGE_BASE="consul" +CONSUL_IMAGE_TAG_REMOTE_PROXY="1.7.2" #No local image for Consul, remote image always used #CBS remote image and tag -CBS_REMOTE_IMAGE="nexus3.onap.org:10001/onap/org.onap.dcaegen2.platform.configbinding.app-app" -CBS_REMOTE_IMAGE_TAG="2.3.0" +CBS_IMAGE_BASE="onap/org.onap.dcaegen2.platform.configbinding.app-app" +CBS_IMAGE_TAG_REMOTE_RELEASE_ONAP="2.3.0" #No local image for CBS, remote image always used #MR stub image and tag -MRSTUB_LOCAL_IMAGE="mrstub" -MRSTUB_LOCAL_IMAGE_TAG="latest" +MRSTUB_IMAGE_BASE="mrstub" +MRSTUB_IMAGE_TAG_LOCAL="latest" #No remote image for MR stub, local image always used + #Callback receiver image and tag -CR_LOCAL_IMAGE="callback-receiver" -CR_LOCAL_IMAGE_TAG="latest" +CR_IMAGE_BASE="callback-receiver" +CR_IMAGE_TAG_LOCAL="latest" #No remote image for CR, local image always used -# Common env var for auto-test. Vars used by docker-compose need to be exported -export DOCKER_SIM_NWNAME="nonrtric-docker-net" # Name of docker private network - -export POLICY_AGENT_EXTERNAL_PORT=8081 # Policy Agent container external port (host -> container) -export POLICY_AGENT_INTERNAL_PORT=8081 # Policy Agent container internal port (container -> container) -export POLICY_AGENT_EXTERNAL_SECURE_PORT=8433 # Policy Agent container external secure port (host -> container) -export POLICY_AGENT_INTERNAL_SECURE_PORT=8433 # Policy Agent container internal secure port (container -> container) -export POLICY_AGENT_APIS="V1" # Supported northbound api versions - -export POLICY_AGENT_APP_NAME="policy-agent" # Name for Policy Agent container -POLICY_AGENT_LOGPATH="/var/log/policy-agent/application.log" # Path the application log in the Policy Agent container -export POLICY_AGENT_APP_NAME_ALIAS="policy-agent-container" # Alias name, name used by the control panel - -export MR_EXTERNAL_PORT=3905 # MR stub container external port (host -> container) -export MR_INTERNAL_PORT=3905 # MR stub container internal port (container -> container) -export MR_EXTERNAL_SECURE_PORT=3906 # MR stub container external secure port (host -> container) -export MR_INTERNAL_SECURE_PORT=3906 # MR stub container internal secure port (container -> container) -export MR_APP_NAME="message-router" # Name for the MR -export MR_READ_URL="/events/A1-POLICY-AGENT-READ/users/policy-agent?timeout=15000&limit=100" # Path to read messages from MR -export MR_WRITE_URL="/events/A1-POLICY-AGENT-WRITE" # Path write messages to MR - -export CR_EXTERNAL_PORT=8090 # Callback receiver container external port (host -> container) -export CR_INTERNAL_PORT=8090 # Callback receiver container internal port (container -> container) -export CR_EXTERNAL_SECURE_PORT=8091 # Callback receiver container external secure port (host -> container) -export CR_INTERNAL_SECURE_PORT=8091 # Callback receiver container internal secure port (container -> container) -export CR_APP_NAME="callback-receiver" # Name for the Callback receiver - -export CONSUL_HOST="consul-server" # Host name of consul -export CONSUL_EXTERNAL_PORT=8500 # Consul container external port (host -> container) -export CONSUL_INTERNAL_PORT=8500 # Consul container internal port (container -> container) -export CONSUL_APP_NAME="polman-consul" # Name for consul container - -export CBS_APP_NAME="polman-cbs" # Name for CBS container -export CBS_EXTERNAL_PORT=10000 # CBS container external port (host -> container) -export CBS_INTERNAL_PORT=10000 # CBS container internal port (container -> container) -export CONFIG_BINDING_SERVICE="config-binding-service" # Host name of CBS - -export RIC_SIM_BASE="g" # Base name of the RIC Simulator container, shall be the group code - # Note, a prefix is added to each container name by the .env file in the 'ric' dir -RIC_SIM_PREFIX="ricsim" # Prefix added to ric container name, added in the .env file in the 'ric' dir - # This prefix can be changed from the command line -export RIC_SIM_INTERNAL_PORT=8085 # RIC Simulator container internal port (container -> container). - # (external ports allocated by docker) -export RIC_SIM_INTERNAL_SECURE_PORT=8185 # RIC Simulator container internal secure port (container -> container). - # (external ports allocated by docker) - -export SDNC_APP_NAME="a1-controller" # Name of the SNDC A1 Controller container -export SDNC_EXTERNAL_PORT=8282 # SNDC A1 Controller container external port (host -> container) -export SDNC_INTERNAL_PORT=8181 # SNDC A1 Controller container internal port (container -> container) -export SDNC_EXTERNAL_SECURE_PORT=8443 # SNDC A1 Controller container external securee port (host -> container) -export SDNC_INTERNAL_SECURE_PORT=8443 # SNDC A1 Controller container internal secure port (container -> container) -export SDNC_DB_APP_NAME="sdnc-db" # Name of the SDNC DB container -export SDNC_A1_TRUSTSTORE_PASSWORD="a1adapter" # SDNC truststore password -SDNC_USER="admin" # SDNC username -SDNC_PWD="Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U" # SNDC PWD -SDNC_API_URL="/restconf/operations/A1-ADAPTER-API:" # Base url path for SNDC API -SDNC_ALIVE_URL="/apidoc/explorer/" # Base url path for SNDC API docs (for alive check) -SDNC_KARAF_LOG="/opt/opendaylight/data/log/karaf.log" # Path to karaf log - - -export CONTROL_PANEL_APP_NAME="control-panel" # Name of the Control Panel container -export CONTROL_PANEL_EXTERNAL_PORT=8080 # Control Panel container external port (host -> container) -export CONTROL_PANEL_INTERNAL_PORT=8080 # Control Panel container external port (host -> container) -CONTROL_PANEL_LOGPATH="/logs/nonrtric-controlpanel.log" # Path the application log in the Control Panel container - -UUID="" # UUID used as prefix to the policy id to simulate a real UUID - # Testscript need to set the UUID to use other this empty prefix is used - -RESTBASE="http://localhost:"$POLICY_AGENT_EXTERNAL_PORT # Base url to the Agent NB REST interface -RESTBASE_SECURE="https://localhost:"$POLICY_AGENT_EXTERNAL_SECURE_PORT # Base url to the secure Agent NB REST interface -DMAAPBASE="http://localhost:"$MR_EXTERNAL_PORT # Base url to the Dmaap adapter, http -DMAAPBASE_SECURE="https://localhost:"$MR_EXTERNAL_SECURE_PORT # Base url to the Dmaap adapter, https -ADAPTER=$RESTBASE # Adapter holds the address the agent R-APP interface (REST OR DMAAP) - # The values of this var is swiched between the two base url when needed +#Http proxy remote image and tag +HTTP_PROXY_IMAGE_BASE="mitmproxy/mitmproxy" +HTTP_PROXY_IMAGE_TAG_REMOTE_PROXY="6.0.2" +#No local image for http proxy, remote image always used + +#ONAP Zookeeper remote image and tag +ONAP_ZOOKEEPER_IMAGE_BASE="onap/dmaap/zookeeper" +ONAP_ZOOKEEPER_IMAGE_TAG_REMOTE_RELEASE_ONAP="6.0.3" +#No local image for ONAP Zookeeper, remote image always used + +#ONAP Kafka remote image and tag +ONAP_KAFKA_IMAGE_BASE="onap/dmaap/kafka111" +ONAP_KAFKA_IMAGE_TAG_REMOTE_RELEASE_ONAP="1.0.4" +#No local image for ONAP Kafka, remote image always used + +#ONAP DMAAP-MR remote image and tag +ONAP_DMAAPMR_IMAGE_BASE="onap/dmaap/dmaap-mr" +ONAP_DMAAPMR_IMAGE_TAG_REMOTE_RELEASE_ONAP="1.1.18" +#No local image for ONAP DMAAP-MR, remote image always used + +#Kube proxy remote image and tag +KUBE_PROXY_IMAGE_BASE="mitmproxy/mitmproxy" +KUBE_PROXY_IMAGE_TAG_REMOTE_PROXY="6.0.2" +#No local image for http proxy, remote image always used + + +# List of app short names produced by the project +PROJECT_IMAGES_APP_NAMES="PA SDNC" + +# List of app short names which images pulled from ORAN +ORAN_IMAGES_APP_NAMES="CP RICSIM" + +# List of app short names which images pulled from ONAP +ONAP_IMAGES_APP_NAMES="" # Not used + +######################################## +# Detailed settings per app +######################################## + + +DOCKER_SIM_NWNAME="nonrtric-docker-net" # Name of docker private network + +KUBE_NONRTRIC_NAMESPACE="nonrtric" # Namespace for all nonrtric components +KUBE_SIM_NAMESPACE="nonrtric-ft" # Namespace for simulators (except MR and RICSIM) +KUBE_ONAP_NAMESPACE="onap" # Namespace for onap (only message router) + +POLICY_AGENT_EXTERNAL_PORT=8081 # Policy Agent container external port (host -> container) +POLICY_AGENT_INTERNAL_PORT=8081 # Policy Agent container internal port (container -> container) +POLICY_AGENT_EXTERNAL_SECURE_PORT=8433 # Policy Agent container external secure port (host -> container) +POLICY_AGENT_INTERNAL_SECURE_PORT=8433 # Policy Agent container internal secure port (container -> container) +POLICY_AGENT_APIS="V1" # Supported northbound api versions +PMS_VERSION="V1" # Tested version of northbound API +PMS_API_PREFIX="" # api url prefix, only for V2 + +POLICY_AGENT_APP_NAME="policymanagementservice" # Name for Policy Agent container +POLICY_AGENT_DISPLAY_NAME="Policy Management Service" +POLICY_AGENT_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host +POLICY_AGENT_LOGPATH="/var/log/policy-agent/application.log" # Path the application log in the Policy Agent container +POLICY_AGENT_APP_NAME_ALIAS="policy-agent-container" # Alias name, name used by the control panel +POLICY_AGENT_CONFIG_KEY="policy-agent" # Key for consul config +POLICY_AGENT_PKG_NAME="org.onap.ccsdk.oran.a1policymanagementservice" # Java base package name +POLICY_AGENT_ACTUATOR="/actuator/loggers/$POLICY_AGENT_PKG_NAME" # Url for trace/debug +POLICY_AGENT_ALIVE_URL="/status" # Base path for alive check +POLICY_AGENT_COMPOSE_DIR="policy_agent" # Dir in simulator_group for docker-compose +POLICY_AGENT_CONFIG_MOUNT_PATH="/opt/app/policy-agent/config" # Path in container for config file +POLICY_AGENT_DATA_MOUNT_PATH="/opt/app/policy-agent/data" # Path in container for data file +POLICY_AGENT_CONFIG_FILE="application.yaml" # Container config file name +POLICY_AGENT_DATA_FILE="application_configuration.json" # Container data file name + +MR_DMAAP_APP_NAME="dmaap-mr" # Name for the Dmaap MR +MR_STUB_APP_NAME="mr-stub" # Name of the MR stub +MR_DMAAP_DISPLAY_NAME="DMAAP Message Router" +MR_STUB_DISPLAY_NAME="Message Router stub" +MR_STUB_CERT_MOUNT_DIR="./cert" +MR_EXTERNAL_PORT=3904 # MR dmaap/stub container external port +MR_INTERNAL_PORT=3904 # MR dmaap/stub container internal port +MR_EXTERNAL_SECURE_PORT=3905 # MR dmaap/stub container external secure port +MR_INTERNAL_SECURE_PORT=3905 # MR dmaap/stub container internal secure port +MR_DMAAP_LOCALHOST_PORT=3904 # MR stub container external port (host -> container) +MR_STUB_LOCALHOST_PORT=3908 # MR stub container external port (host -> container) +MR_DMAAP_LOCALHOST_SECURE_PORT=3905 # MR stub container internal port (container -> container) +MR_STUB_LOCALHOST_SECURE_PORT=3909 # MR stub container external secure port (host -> container) +MR_READ_TOPIC="A1-POLICY-AGENT-READ" # Read topic +MR_WRITE_TOPIC="A1-POLICY-AGENT-WRITE" # Write topic +MR_READ_URL="/events/$MR_READ_TOPIC/users/policy-agent?timeout=15000&limit=100" # Path to read messages from MR +MR_WRITE_URL="/events/$MR_WRITE_TOPIC" # Path to write messages to MR +MR_STUB_ALIVE_URL="/" # Base path for mr stub alive check +MR_DMAAP_ALIVE_URL="/topics" # Base path for dmaap-mr alive check +MR_DMAAP_COMPOSE_DIR="dmaapmr" # Dir in simulator_group for dmaap mr for - docker-compose +MR_STUB_COMPOSE_DIR="mrstub" # Dir in simulator_group for mr stub for - docker-compose +MR_KAFKA_APP_NAME="kafka" # Kafka app name +MR_ZOOKEEPER_APP_NAME="zookeeper" # Zookeeper app name + + +CR_APP_NAME="callback-receiver" # Name for the Callback receiver +CR_DISPLAY_NAME="Callback Reciever" +CR_EXTERNAL_PORT=8090 # Callback receiver container external port (host -> container) +CR_INTERNAL_PORT=8090 # Callback receiver container internal port (container -> container) +CR_EXTERNAL_SECURE_PORT=8091 # Callback receiver container external secure port (host -> container) +CR_INTERNAL_SECURE_PORT=8091 # Callback receiver container internal secure port (container -> container) +CR_APP_CALLBACK="/callbacks" # Url for callbacks +CR_ALIVE_URL="/" # Base path for alive check +CR_COMPOSE_DIR="cr" # Dir in simulator_group for docker-compose + +CONSUL_HOST="consul-server" # Host name of consul +CONSUL_DISPLAY_NAME="Consul" +CONSUL_EXTERNAL_PORT=8500 # Consul container external port (host -> container) +CONSUL_INTERNAL_PORT=8500 # Consul container internal port (container -> container) +CONSUL_APP_NAME="polman-consul" # Name for consul container +CONSUL_ALIVE_URL="/ui/dc1/kv" # Base path for alive check +CONSUL_CBS_COMPOSE_DIR="consul_cbs" # Dir in simulator group for docker compose + +CBS_APP_NAME="polman-cbs" # Name for CBS container +CBS_DISPLAY_NAME="Config Binding Service" +CBS_EXTERNAL_PORT=10000 # CBS container external port (host -> container) +CBS_INTERNAL_PORT=10000 # CBS container internal port (container -> container) +CONFIG_BINDING_SERVICE="config-binding-service" # Host name of CBS +CBS_ALIVE_URL="/healthcheck" # Base path for alive check + +RIC_SIM_DISPLAY_NAME="Near-RT RIC A1 Simulator" +RIC_SIM_BASE="g" # Base name of the RIC Simulator container, shall be the group code + # Note, a prefix is added to each container name by the .env file in the 'ric' dir +RIC_SIM_PREFIX="ricsim" # Prefix added to ric container name, added in the .env file in the 'ric' dir + # This prefix can be changed from the command line +RIC_SIM_INTERNAL_PORT=8085 # RIC Simulator container internal port (container -> container). + # (external ports allocated by docker) +RIC_SIM_INTERNAL_SECURE_PORT=8185 # RIC Simulator container internal secure port (container -> container). + # (external ports allocated by docker) +RIC_SIM_CERT_MOUNT_DIR="./cert" +RIC_SIM_COMPOSE_DIR="ric" # Dir in simulator group for docker compose +RIC_SIM_ALIVE_URL="/" + +SDNC_APP_NAME="a1controller" # Name of the SNDC A1 Controller container +SDNC_DISPLAY_NAME="SDNC A1 Controller" +SDNC_EXTERNAL_PORT=8282 # SNDC A1 Controller container external port (host -> container) +SDNC_INTERNAL_PORT=8181 # SNDC A1 Controller container internal port (container -> container) +SDNC_EXTERNAL_SECURE_PORT=8443 # SNDC A1 Controller container external securee port (host -> container) +SDNC_INTERNAL_SECURE_PORT=8443 # SNDC A1 Controller container internal secure port (container -> container) +SDNC_DB_APP_NAME="sdncdb" # Name of the SDNC DB container +SDNC_A1_TRUSTSTORE_PASSWORD="a1adapter" # SDNC truststore password +SDNC_USER="admin" # SDNC username +SDNC_PWD="Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U" # SNDC PWD +SDNC_API_URL="/restconf/operations/A1-ADAPTER-API:" # Base url path for SNDC API +SDNC_ALIVE_URL="/apidoc/explorer/" # Base url path for SNDC API docs (for alive check) +SDNC_COMPOSE_DIR="sdnc" # Dir in simulator_group for docker-compose +SDNC_COMPOSE_FILE="docker-compose.yml" +SDNC_KUBE_APP_FILE="app.yaml" +SDNC_KARAF_LOG="/opt/opendaylight/data/log/karaf.log" # Path to karaf log +SDNC_RESPONSE_JSON_KEY="output" # Key name for output json in replies from sdnc + +CONTROL_PANEL_APP_NAME="controlpanel" # Name of the Control Panel container +CONTROL_PANEL_DISPLAY_NAME="Non-RT RIC Control Panel" +CONTROL_PANEL_EXTERNAL_PORT=8080 # Control Panel container external port (host -> container) +CONTROL_PANEL_INTERNAL_PORT=8080 # Control Panel container internal port (container -> container) +CONTROL_PANEL_EXTERNAL_SECURE_PORT=8880 # Control Panel container external port (host -> container) +CONTROL_PANEL_INTERNAL_SECURE_PORT=8082 # Control Panel container internal port (container -> container) +CONTROL_PANEL_LOGPATH="/logs/nonrtric-controlpanel.log" # Path the application log in the Control Panel container +CONTROL_PANEL_ALIVE_URL="/" # Base path for alive check +CONTROL_PANEL_COMPOSE_DIR="control_panel" # Dir in simulator_group for docker-compose +CONTROL_PANEL_CONFIG_MOUNT_PATH=/maven # Container internal path for config +CONTROL_PANEL_CONFIG_FILE=application.properties # Config file name +CONTROL_PANEL_HOST_MNT_DIR="./mnt" # Mounted dir, relative to compose file, on the host + +HTTP_PROXY_APP_NAME="httpproxy" # Name of the Http Proxy container +HTTP_PROXY_DISPLAY_NAME="Http Proxy" +HTTP_PROXY_EXTERNAL_PORT=8780 # Http Proxy container external port (host -> container) +HTTP_PROXY_INTERNAL_PORT=8080 # Http Proxy container internal port (container -> container) +HTTP_PROXY_WEB_EXTERNAL_PORT=8781 # Http Proxy container external port (host -> container) +HTTP_PROXY_WEB_INTERNAL_PORT=8081 # Http Proxy container internal port (container -> container) +HTTP_PROXY_CONFIG_PORT=0 # Port number for proxy config, will be set if proxy is started +HTTP_PROXY_CONFIG_HOST_NAME="" # Proxy host, will be set if proxy is started +HTTP_PROXY_ALIVE_URL="/" # Base path for alive check +HTTP_PROXY_COMPOSE_DIR="httpproxy" # Dir in simulator_group for docker-compose + + +KUBE_PROXY_APP_NAME="kubeproxy" # Name of the Kube Http Proxy container +KUBE_PROXY_DISPLAY_NAME="Kube Http Proxy" +KUBE_PROXY_EXTERNAL_PORT=8730 # Kube Http Proxy container external port (host -> container) +KUBE_PROXY_INTERNAL_PORT=8080 # Kube Http Proxy container internal port (container -> container) +KUBE_PROXY_WEB_EXTERNAL_PORT=8731 # Kube Http Proxy container external port (host -> container) +KUBE_PROXY_WEB_INTERNAL_PORT=8081 # Kube Http Proxy container internal port (container -> container) +KUBE_PROXY_PATH="" # Proxy url path, will be set if proxy is started +KUBE_PROXY_ALIVE_URL="/" # Base path for alive check +KUBE_PROXY_COMPOSE_DIR="kubeproxy" # Dir in simulator_group for docker-compose + +######################################## +# Setting for common curl-base function +######################################## + + +UUID="" # UUID used as prefix to the policy id to simulate a real UUID + # Testscript need to set the UUID to use other this empty prefix is used +