X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=test%2Fcommon%2Fa1pms_api_functions.sh;h=a0062ac19c8f70e1cae2271177d4822e2145b690;hb=HEAD;hp=e39187274414cdbbf1e4e7bd3f1a51a205a8a937;hpb=d03286355ba8f11aacabbee178fe5cb084be7b51;p=nonrtric.git diff --git a/test/common/a1pms_api_functions.sh b/test/common/a1pms_api_functions.sh index e3918727..5fb6e256 100644 --- a/test/common/a1pms_api_functions.sh +++ b/test/common/a1pms_api_functions.sh @@ -2,6 +2,7 @@ # ============LICENSE_START=============================================== # Copyright (C) 2021-2023 Nordix Foundation. All rights reserved. +# Copyright (C) 2024 OpenInfra Foundation Europe. All rights reserved. # ======================================================================== # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -25,7 +26,7 @@ # arg: (selects staging, snapshot, release etc) # is present only for images with staging, snapshot,release tags __A1PMS_imagesetup() { - __check_and_create_image_var A1PMS "A1PMS_IMAGE" "A1PMS_IMAGE_BASE" "A1PMS_IMAGE_TAG" $1 "$A1PMS_DISPLAY_NAME" + __check_and_create_image_var A1PMS "A1PMS_IMAGE" "A1PMS_IMAGE_BASE" "A1PMS_IMAGE_TAG" $1 "$A1PMS_DISPLAY_NAME" "" } # Pull image from remote repo or use locally built image @@ -34,83 +35,82 @@ __A1PMS_imagesetup() { # Shall be used for images that does not allow overriding # Both var may contain: 'remote', 'remote-remove' or 'local' __A1PMS_imagepull() { - __check_and_pull_image $1 "$A1PMS_DISPLAY_NAME" $A1PMS_APP_NAME A1PMS_IMAGE + __check_and_pull_image $1 "$A1PMS_DISPLAY_NAME" $A1PMS_APP_NAME A1PMS_IMAGE } # Build image (only for simulator or interfaces stubs owned by the test environment) # arg: (selects staging, snapshot, release etc) # is present only for images with staging, snapshot,release tags __A1PMS_imagebuild() { - echo -e $RED" Image for app A1PMS shall never be built"$ERED + echo -e $RED" Image for app A1PMS shall never be built"$ERED } # Generate a string for each included image using the app display name and a docker images format string # If a custom image repo is used then also the source image from the local repo is listed # arg: __A1PMS_image_data() { - echo -e "$A1PMS_DISPLAY_NAME\t$(docker images --format $1 $A1PMS_IMAGE)" >> $2 - if [ ! -z "$A1PMS_IMAGE_SOURCE" ]; then - echo -e "-- source image --\t$(docker images --format $1 $A1PMS_IMAGE_SOURCE)" >> $2 - fi + echo -e "$A1PMS_DISPLAY_NAME\t$(docker images --format $1 $A1PMS_IMAGE)" >>$2 + if [ ! -z "$A1PMS_IMAGE_SOURCE" ]; then + echo -e "-- source image --\t$(docker images --format $1 $A1PMS_IMAGE_SOURCE)" >>$2 + fi } # Scale kubernetes resources to zero # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action. # This function is called for apps fully managed by the test script __A1PMS_kube_scale_zero() { - __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS + __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS } # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action. -# This function is called for prestarted apps not managed by the test script. +# This function is called for pre-started apps not managed by the test script. __A1PMS_kube_scale_zero_and_wait() { - __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-policymanagementservice + __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-policymanagementservice } -# Delete all kube resouces for the app +# Delete all kube resources for the app # This function is called for apps managed by the test script. __A1PMS_kube_delete_all() { - __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS + __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS } # Store docker logs # This function is called for apps managed by the test script. -# args: +# args: __A1PMS_store_docker_logs() { - if [ $RUNMODE == "KUBE" ]; then - kubectl $KUBECONF logs -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_a1pms.log 2>&1 - else - docker logs $A1PMS_APP_NAME > $1$2_a1pms.log 2>&1 - fi + if [ $RUNMODE == "KUBE" ]; then + kubectl $KUBECONF logs -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 >$1$2_a1pms.log 2>&1 + else + docker logs $A1PMS_APP_NAME >$1$2_a1pms.log 2>&1 + fi } # Initial setup of protocol, host and ports # This function is called for apps managed by the test script. # args: - __A1PMS_initial_setup() { - use_a1pms_rest_http - export A1PMS_SIDECAR_JWT_FILE="" + use_a1pms_rest_http + export A1PMS_SIDECAR_JWT_FILE="" } -# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers +# Set app short-name, app name and namespace for logging runtime statistics of kubernetes pods or docker containers # For docker, the namespace shall be excluded -# This function is called for apps managed by the test script as well as for prestarted apps. +# This function is called for apps managed by the test script as well as for pre-started apps. # args: - -__A1PMS_statisics_setup() { - if [ $RUNMODE == "KUBE" ]; then - echo "A1PMS $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE" - else - echo "A1PMS $A1PMS_APP_NAME" - fi +__A1PMS_statistics_setup() { + if [ $RUNMODE == "KUBE" ]; then + echo "A1PMS $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE" + else + echo "A1PMS $A1PMS_APP_NAME" + fi } # Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied # args: - __A1PMS_test_requirements() { - : + : } - ####################################################### ########################### @@ -121,55 +121,55 @@ __A1PMS_test_requirements() { # args: - # (Function for test scripts) use_a1pms_rest_http() { - __a1pms_set_protocoll "http" $A1PMS_INTERNAL_PORT $A1PMS_EXTERNAL_PORT + __a1pms_set_protocoll "http" $A1PMS_INTERNAL_PORT $A1PMS_EXTERNAL_PORT } # Set https as the protocol to use for all communication to the A1PMS # args: - # (Function for test scripts) use_a1pms_rest_https() { - __a1pms_set_protocoll "https" $A1PMS_INTERNAL_SECURE_PORT $A1PMS_EXTERNAL_SECURE_PORT + __a1pms_set_protocoll "https" $A1PMS_INTERNAL_SECURE_PORT $A1PMS_EXTERNAL_SECURE_PORT } # All calls to the a1pms will be directed to the a1pms dmaap interface over http from now on # args: - # (Function for test scripts) use_a1pms_dmaap_http() { - echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD - echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms" - A1PMS_ADAPTER_TYPE="MR-HTTP" - echo "" + echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD + echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms" + A1PMS_ADAPTER_TYPE="MR-HTTP" + echo "" } # All calls to the a1pms will be directed to the a1pms dmaap interface over https from now on # args: - # (Function for test scripts) use_a1pms_dmaap_https() { - echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD - echo -e " Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms" - echo -e $YELLOW" Setting http instead of https - MR only uses http"$EYELLOW - A1PMS_ADAPTER_TYPE="MR-HTTPS" - echo "" + echo -e $BOLD"$A1PMS_DISPLAY_NAME dmaap protocol setting"$EBOLD + echo -e " Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the a1pms" + echo -e $YELLOW" Setting http instead of https - MR only uses http"$EYELLOW + A1PMS_ADAPTER_TYPE="MR-HTTPS" + echo "" } # Setup paths to svc/container for internal and external access # args: __a1pms_set_protocoll() { - echo -e $BOLD"$A1PMS_DISPLAY_NAME protocol setting"$EBOLD - echo -e " Using $BOLD $1 $EBOLD towards $A1PMS_DISPLAY_NAME" + echo -e $BOLD"$A1PMS_DISPLAY_NAME protocol setting"$EBOLD + echo -e " Using $BOLD $1 $EBOLD towards $A1PMS_DISPLAY_NAME" - ## Access to Dmaap adapter + ## Access to Dmaap adapter - A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME":"$2 # docker access, container->container and script->container via proxy - if [ $RUNMODE == "KUBE" ]; then - A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy - fi + A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME":"$2 # docker access, container->container and script->container via proxy + if [ $RUNMODE == "KUBE" ]; then + A1PMS_SERVICE_PATH=$1"://"$A1PMS_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy + fi - # A1PMS_ADAPTER used for switching between REST and DMAAP (only REST supported currently) - A1PMS_ADAPTER_TYPE="REST" - A1PMS_ADAPTER=$A1PMS_SERVICE_PATH + # A1PMS_ADAPTER used for switching between REST and DMAAP (only REST supported currently) + A1PMS_ADAPTER_TYPE="REST" + A1PMS_ADAPTER=$A1PMS_SERVICE_PATH - echo "" + echo "" } # Make curl retries towards the a1pms for http response codes set in this env var, space separated list of codes @@ -182,190 +182,189 @@ __A1PMS_WORKER_NODE="" # args: PROXY|NOPROXY __export_a1pms_vars() { - export A1PMS_APP_NAME - export A1PMS_APP_NAME_ALIAS - export A1PMS_DISPLAY_NAME - - export KUBE_NONRTRIC_NAMESPACE - export A1PMS_IMAGE - export A1PMS_INTERNAL_PORT - export A1PMS_INTERNAL_SECURE_PORT - export A1PMS_EXTERNAL_PORT - export A1PMS_EXTERNAL_SECURE_PORT - export A1PMS_CONFIG_MOUNT_PATH - export A1PMS_DATA_MOUNT_PATH - export A1PMS_CONFIG_CONFIGMAP_NAME=$A1PMS_APP_NAME"-config" - export A1PMS_DATA_CONFIGMAP_NAME=$A1PMS_APP_NAME"-data" - export A1PMS_PKG_NAME - export A1PMS_CONFIG_KEY - export DOCKER_SIM_NWNAME - export A1PMS_HOST_MNT_DIR - export A1PMS_CONFIG_FILE - - export A1PMS_DATA_PV_NAME=$A1PMS_APP_NAME"-pv" - export A1PMS_DATA_PVC_NAME=$A1PMS_APP_NAME"-pvc" - ##Create a unique path for the pv each time to prevent a previous volume to be reused - export A1PMS_PV_PATH="a1pmsdata-"$(date +%s) - export A1PMS_CONTAINER_MNT_DIR - export HOST_PATH_BASE_DIR - - if [ $1 == "PROXY" ]; then - export A1PMS_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started - export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started - if [ $A1PMS_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$A1PMS_HTTP_PROXY_CONFIG_HOST_NAME" ]; then - echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW - else - echo " Configured with http proxy" - fi - else - export A1PMS_HTTP_PROXY_CONFIG_PORT=0 - export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME="" - echo " Configured without http proxy" - fi + export A1PMS_APP_NAME + export A1PMS_APP_NAME_ALIAS + export A1PMS_DISPLAY_NAME + + export KUBE_NONRTRIC_NAMESPACE + export A1PMS_IMAGE + export A1PMS_INTERNAL_PORT + export A1PMS_INTERNAL_SECURE_PORT + export A1PMS_EXTERNAL_PORT + export A1PMS_EXTERNAL_SECURE_PORT + export A1PMS_CONFIG_MOUNT_PATH + export A1PMS_DATA_MOUNT_PATH + export A1PMS_CONFIG_CONFIGMAP_NAME=$A1PMS_APP_NAME"-config" + export A1PMS_DATA_CONFIGMAP_NAME=$A1PMS_APP_NAME"-data" + export A1PMS_PKG_NAME + export A1PMS_CONFIG_KEY + export DOCKER_SIM_NWNAME + export A1PMS_HOST_MNT_DIR + export A1PMS_CONFIG_FILE + + export A1PMS_DATA_PV_NAME=$A1PMS_APP_NAME"-pv" + export A1PMS_DATA_PVC_NAME=$A1PMS_APP_NAME"-pvc" + ##Create a unique path for the pv each time to prevent a previous volume to be reused + export A1PMS_PV_PATH="a1pmsdata-"$(date +%s) + export A1PMS_CONTAINER_MNT_DIR + export HOST_PATH_BASE_DIR + + if [ $1 == "PROXY" ]; then + export A1PMS_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started + export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started + if [ $A1PMS_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$A1PMS_HTTP_PROXY_CONFIG_HOST_NAME" ]; then + echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW + else + echo " Configured with http proxy" + fi + else + export A1PMS_HTTP_PROXY_CONFIG_PORT=0 + export A1PMS_HTTP_PROXY_CONFIG_HOST_NAME="" + echo " Configured without http proxy" + fi } - # Start the ms # args: (docker) PROXY|NOPROXY # args: (kube) PROXY|NOPROXY [ ] # (Function for test scripts) start_a1pms() { - echo -e $BOLD"Starting $A1PMS_DISPLAY_NAME"$EBOLD - - if [ $RUNMODE == "KUBE" ]; then - - # Check if app shall be fully managed by the test script - __check_included_image "A1PMS" - retcode_i=$? - - # Check if app shall only be used by the testscipt - __check_prestarted_image "A1PMS" - retcode_p=$? - - if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then - echo -e $RED"The $A1PMS_APP_NAME app is not included as managed nor prestarted in this test script"$ERED - echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED - exit - fi - if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then - echo -e $RED"The $A1PMS_APP_NAME app is included both as managed and prestarted in this test script"$ERED - echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED - exit - fi - - if [ $retcode_p -eq 0 ]; then - echo -e " Using existing $A1PMS_APP_NAME deployment and service" - echo " Setting $A1PMS_APP_NAME replicas=1" - res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE) - __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1 - fi - - if [ $retcode_i -eq 0 ]; then - - echo -e " Creating $A1PMS_APP_NAME app and expose service" - - #Check if nonrtric namespace exists, if not create it - __kube_create_namespace $KUBE_NONRTRIC_NAMESPACE - - __export_a1pms_vars $1 - - # Create config map for config - configfile=$PWD/tmp/$A1PMS_CONFIG_FILE - cp $2 $configfile - output_yaml=$PWD/tmp/a1pms-cfc.yaml - __kube_create_configmap $A1PMS_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $configfile $output_yaml - - # Create config map for data - data_json=$PWD/tmp/$A1PMS_DATA_FILE - if [ $# -lt 3 ]; then - #create empty dummy file - echo "{}" > $data_json - else - cp $3 $data_json - fi - output_yaml=$PWD/tmp/a1pms-cfd.yaml - __kube_create_configmap $A1PMS_DATA_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml - - ## Create pv - input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pv.yaml - output_yaml=$PWD/tmp/a1pms-pv.yaml - __kube_create_instance pv $A1PMS_APP_NAME $input_yaml $output_yaml - - ## Create pvc - input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pvc.yaml - output_yaml=$PWD/tmp/a1pms-pvc.yaml - __kube_create_instance pvc $A1PMS_APP_NAME $input_yaml $output_yaml - - # Create service - input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"svc.yaml - output_yaml=$PWD/tmp/a1pmssvc.yaml - __kube_create_instance service $A1PMS_APP_NAME $input_yaml $output_yaml - - # Create app - input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"app.yaml - output_yaml=$PWD/tmp/a1pmsapp.yaml - if [ -z "$A1PMS_SIDECAR_JWT_FILE" ]; then - cat $input_yaml | sed '/#A1PMS_JWT_START/,/#A1PMS_JWT_STOP/d' > $PWD/tmp/a1pmsapp_tmp.yaml - input_yaml=$PWD/tmp/a1pmsapp_tmp.yaml - fi - __kube_create_instance app $A1PMS_APP_NAME $input_yaml $output_yaml - - fi - - # Keep the initial worker node in case the pod need to be "restarted" - must be made to the same node due to a volume mounted on the host - if [ $retcode_i -eq 0 ]; then - __A1PMS_WORKER_NODE=$(kubectl $KUBECONF get pod -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE -o jsonpath='{.items[*].spec.nodeName}') - if [ -z "$__A1PMS_WORKER_NODE" ]; then - echo -e $YELLOW" Cannot find worker node for pod for $A1PMS_APP_NAME, persistency may not work"$EYELLOW - fi - else - echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW - fi - - __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL - - else - __check_included_image 'A1PMS' - if [ $? -eq 1 ]; then - echo -e $RED"The A1PMS app is not included in this test script"$ERED - echo -e $RED"The A1PMS will not be started"$ERED - exit - fi - - curdir=$PWD - cd $SIM_GROUP - cd a1pms - cd $A1PMS_HOST_MNT_DIR - #cd .. - if [ -d db ]; then - if [ "$(ls -A $DIR)" ]; then - echo -e $BOLD" Cleaning files in mounted dir: $PWD/db"$EBOLD - rm -rf db/* &> /dev/null - if [ $? -ne 0 ]; then - echo -e $RED" Cannot remove database files in: $PWD"$ERED - exit 1 - fi - fi - else - echo " No files in mounted dir or dir does not exists" - mkdir db - fi - cd $curdir - - __export_a1pms_vars $1 - - dest_file=$SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_HOST_MNT_DIR/application.yaml - - envsubst < $2 > $dest_file - - __start_container $A1PMS_COMPOSE_DIR "" NODOCKERARGS 1 $A1PMS_APP_NAME - - __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL - fi - - __collect_endpoint_stats_image_info "A1PMS" $A1PMS_IMAGE - echo "" - return 0 + echo -e $BOLD"Starting $A1PMS_DISPLAY_NAME"$EBOLD + + if [ $RUNMODE == "KUBE" ]; then + + # Check if app shall be fully managed by the test script + __check_included_image "A1PMS" + retcode_i=$? + + # Check if app shall only be used by the test script + __check_prestarted_image "A1PMS" + retcode_p=$? + + if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then + echo -e $RED"The $A1PMS_APP_NAME app is not included as managed nor prestarted in this test script"$ERED + echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED + exit + fi + if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then + echo -e $RED"The $A1PMS_APP_NAME app is included both as managed and prestarted in this test script"$ERED + echo -e $RED"The $A1PMS_APP_NAME will not be started"$ERED + exit + fi + + if [ $retcode_p -eq 0 ]; then + echo -e " Using existing $A1PMS_APP_NAME deployment and service" + echo " Setting $A1PMS_APP_NAME replicas=1" + res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE) + __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1 + fi + + if [ $retcode_i -eq 0 ]; then + + echo -e " Creating $A1PMS_APP_NAME app and expose service" + + #Check if nonrtric namespace exists, if not create it + __kube_create_namespace $KUBE_NONRTRIC_NAMESPACE + + __export_a1pms_vars $1 + + # Create config map for config + configfile=$PWD/tmp/$A1PMS_CONFIG_FILE + cp $2 $configfile + output_yaml=$PWD/tmp/a1pms-cfc.yaml + __kube_create_configmap $A1PMS_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $configfile $output_yaml + + # Create config map for data + data_json=$PWD/tmp/$A1PMS_DATA_FILE + if [ $# -lt 3 ]; then + #create empty dummy file + echo "{}" >$data_json + else + cp $3 $data_json + fi + output_yaml=$PWD/tmp/a1pms-cfd.yaml + __kube_create_configmap $A1PMS_DATA_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml + + ## Create pv + input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pv.yaml + output_yaml=$PWD/tmp/a1pms-pv.yaml + __kube_create_instance pv $A1PMS_APP_NAME $input_yaml $output_yaml + + ## Create pvc + input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"pvc.yaml + output_yaml=$PWD/tmp/a1pms-pvc.yaml + __kube_create_instance pvc $A1PMS_APP_NAME $input_yaml $output_yaml + + # Create service + input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"svc.yaml + output_yaml=$PWD/tmp/a1pmssvc.yaml + __kube_create_instance service $A1PMS_APP_NAME $input_yaml $output_yaml + + # Create app + input_yaml=$SIM_GROUP"/"$A1PMS_COMPOSE_DIR"/"app.yaml + output_yaml=$PWD/tmp/a1pmsapp.yaml + if [ -z "$A1PMS_SIDECAR_JWT_FILE" ]; then + cat $input_yaml | sed '/#A1PMS_JWT_START/,/#A1PMS_JWT_STOP/d' >$PWD/tmp/a1pmsapp_tmp.yaml + input_yaml=$PWD/tmp/a1pmsapp_tmp.yaml + fi + __kube_create_instance app $A1PMS_APP_NAME $input_yaml $output_yaml + + fi + + # Keep the initial worker node in case the pod need to be "restarted" - must be made to the same node due to a volume mounted on the host + if [ $retcode_i -eq 0 ]; then + __A1PMS_WORKER_NODE=$(kubectl $KUBECONF get pod -l "autotest=A1PMS" -n $KUBE_NONRTRIC_NAMESPACE -o jsonpath='{.items[*].spec.nodeName}') + if [ -z "$__A1PMS_WORKER_NODE" ]; then + echo -e $YELLOW" Cannot find worker node for pod for $A1PMS_APP_NAME, persistency may not work"$EYELLOW + fi + else + echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW + fi + + __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL + + else + __check_included_image 'A1PMS' + if [ $? -eq 1 ]; then + echo -e $RED"The A1PMS app is not included in this test script"$ERED + echo -e $RED"The A1PMS will not be started"$ERED + exit + fi + + curdir=$PWD + cd $SIM_GROUP + cd a1pms + cd $A1PMS_HOST_MNT_DIR + #cd .. + if [ -d db ]; then + if [ "$(ls -A $DIR)" ]; then + echo -e $BOLD" Cleaning files in mounted dir: $PWD/db"$EBOLD + rm -rf db/* &>/dev/null + if [ $? -ne 0 ]; then + echo -e $RED" Cannot remove database files in: $PWD"$ERED + exit 1 + fi + fi + else + echo " No files in mounted dir or dir does not exists" + mkdir db + fi + cd $curdir + + __export_a1pms_vars $1 + + dest_file=$SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_HOST_MNT_DIR/application.yaml + + envsubst <$2 >$dest_file + + __start_container $A1PMS_COMPOSE_DIR "" NODOCKERARGS 1 $A1PMS_APP_NAME + + __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL + fi + + __collect_endpoint_stats_image_info "A1PMS" $A1PMS_IMAGE + echo "" + return 0 } # Stop the a1pms @@ -373,304 +372,295 @@ start_a1pms() { # args: - # (Function for test scripts) stop_a1pms() { - echo -e $BOLD"Stopping $A1PMS_DISPLAY_NAME"$EBOLD - - if [ $RUNMODE == "KUBE" ]; then - - __check_prestarted_image "A1PMS" - if [ $? -eq 0 ]; then - echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW - res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE) - __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 0 - return 0 - fi - __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS - echo " Deleting the replica set - a new will be started when the app is started" - tmp=$(kubectl $KUBECONF delete rs -n $KUBE_NONRTRIC_NAMESPACE -l "autotest=PA") - if [ $? -ne 0 ]; then - echo -e $RED" Could not delete replica set "$RED - ((RES_CONF_FAIL++)) - return 1 - fi - else - docker stop $A1PMS_APP_NAME &> ./tmp/.dockererr - if [ $? -ne 0 ]; then - __print_err "Could not stop $A1PMS_APP_NAME" $@ - cat ./tmp/.dockererr - ((RES_CONF_FAIL++)) - return 1 - fi - fi - echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD - echo "" - return 0 + echo -e $BOLD"Stopping $A1PMS_DISPLAY_NAME"$EBOLD + + if [ $RUNMODE == "KUBE" ]; then + + __check_prestarted_image "A1PMS" + if [ $? -eq 0 ]; then + echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW + res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE) + __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 0 + return 0 + fi + __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest A1PMS + echo " Deleting the replica set - a new will be started when the app is started" + tmp=$(kubectl $KUBECONF delete rs -n $KUBE_NONRTRIC_NAMESPACE -l "autotest=PA") + if [ $? -ne 0 ]; then + echo -e $RED" Could not delete replica set "$RED + ((RES_CONF_FAIL++)) + return 1 + fi + else + docker stop $A1PMS_APP_NAME &>./tmp/.dockererr + if [ $? -ne 0 ]; then + __print_err "Could not stop $A1PMS_APP_NAME" $@ + cat ./tmp/.dockererr + ((RES_CONF_FAIL++)) + return 1 + fi + fi + echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD + echo "" + return 0 } # Start a previously stopped a1pms # args: - # (Function for test scripts) start_stopped_a1pms() { - echo -e $BOLD"Starting (the previously stopped) $A1PMS_DISPLAY_NAME"$EBOLD - - if [ $RUNMODE == "KUBE" ]; then - - __check_prestarted_image "A1PMS" - if [ $? -eq 0 ]; then - echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW - res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE) - __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1 - __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL - return 0 - fi - - # Tie the A1PMS to the same worker node it was initially started on - # A PVC of type hostPath is mounted to A1PMS, for persistent storage, so the A1PMS must always be on the node which mounted the volume - if [ -z "$__A1PMS_WORKER_NODE" ]; then - echo -e $RED" No initial worker node found for pod "$RED - ((RES_CONF_FAIL++)) - return 1 - else - echo -e $BOLD" Setting nodeSelector kubernetes.io/hostname=$__A1PMS_WORKER_NODE to deployment for $A1PMS_APP_NAME. Pod will always run on this worker node: $__A1PMS_WORKER_NODE"$BOLD - echo -e $BOLD" The mounted volume is mounted as hostPath and only available on that worker node."$BOLD - tmp=$(kubectl $KUBECONF patch deployment $A1PMS_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE --patch '{"spec": {"template": {"spec": {"nodeSelector": {"kubernetes.io/hostname": "'$__A1PMS_WORKER_NODE'"}}}}}') - if [ $? -ne 0 ]; then - echo -e $YELLOW" Cannot set nodeSelector to deployment for $A1PMS_APP_NAME, persistency may not work"$EYELLOW - fi - __kube_scale deployment $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1 - fi - else - docker start $A1PMS_APP_NAME &> ./tmp/.dockererr - if [ $? -ne 0 ]; then - __print_err "Could not start (the stopped) $A1PMS_APP_NAME" $@ - cat ./tmp/.dockererr - ((RES_CONF_FAIL++)) - return 1 - fi - fi - __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL - if [ $? -ne 0 ]; then - return 1 - fi - echo "" - return 0 -} + echo -e $BOLD"Starting (the previously stopped) $A1PMS_DISPLAY_NAME"$EBOLD + + if [ $RUNMODE == "KUBE" ]; then + __check_prestarted_image "A1PMS" + if [ $? -eq 0 ]; then + echo -e $YELLOW" Persistency may not work for app $A1PMS_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW + res_type=$(__kube_get_resource_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE) + __kube_scale $res_type $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1 + __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL + return 0 + fi -# Function to perpare the consul configuration according to the current simulator configuration + # Tie the A1PMS to the same worker node it was initially started on + # A PVC of type hostPath is mounted to A1PMS, for persistent storage, so the A1PMS must always be on the node which mounted the volume + if [ -z "$__A1PMS_WORKER_NODE" ]; then + echo -e $RED" No initial worker node found for pod "$RED + ((RES_CONF_FAIL++)) + return 1 + else + echo -e $BOLD" Setting nodeSelector kubernetes.io/hostname=$__A1PMS_WORKER_NODE to deployment for $A1PMS_APP_NAME. Pod will always run on this worker node: $__A1PMS_WORKER_NODE"$BOLD + echo -e $BOLD" The mounted volume is mounted as hostPath and only available on that worker node."$BOLD + tmp=$(kubectl $KUBECONF patch deployment $A1PMS_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE --patch '{"spec": {"template": {"spec": {"nodeSelector": {"kubernetes.io/hostname": "'$__A1PMS_WORKER_NODE'"}}}}}') + if [ $? -ne 0 ]; then + echo -e $YELLOW" Cannot set nodeSelector to deployment for $A1PMS_APP_NAME, persistency may not work"$EYELLOW + fi + __kube_scale deployment $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1 + fi + else + docker start $A1PMS_APP_NAME &>./tmp/.dockererr + if [ $? -ne 0 ]; then + __print_err "Could not start (the stopped) $A1PMS_APP_NAME" $@ + cat ./tmp/.dockererr + ((RES_CONF_FAIL++)) + return 1 + fi + fi + __check_service_start $A1PMS_APP_NAME $A1PMS_SERVICE_PATH$A1PMS_ALIVE_URL + if [ $? -ne 0 ]; then + return 1 + fi + echo "" + return 0 +} + +# Function to prepare the a1pms configuration according to the current simulator configuration # args: SDNC|NOSDNC [ ] # (Function for test scripts) prepare_a1pms_config() { - echo -e $BOLD"Prepare A1PMS config"$EBOLD - - echo " Writing consul config for "$A1PMS_APP_NAME" to file: "$2 - - if [ $# != 2 ] && [ $# != 4 ]; then - ((RES_CONF_FAIL++)) - __print_err "need two or four args, SDNC|NOSDNC [ ]" $@ - exit 1 - fi - - if [ $1 == "SDNC" ]; then - echo -e " Config$BOLD including SDNC$EBOLD configuration" - elif [ $1 == "NOSDNC" ]; then - echo -e " Config$BOLD excluding SDNC$EBOLD configuration" - else - ((RES_CONF_FAIL++)) - __print_err "need three args, SDNC|NOSDNC HEADER|NOHEADER" $@ - exit 1 - fi - - config_json="\n {" - if [ $1 == "SDNC" ]; then - config_json=$config_json"\n \"controller\": [" - config_json=$config_json"\n {" - config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\"," - config_json=$config_json"\n \"baseUrl\": \"$SDNC_SERVICE_PATH\"," - config_json=$config_json"\n \"userName\": \"$SDNC_USER\"," - config_json=$config_json"\n \"password\": \"$SDNC_PWD\"" - config_json=$config_json"\n }" - config_json=$config_json"\n ]," - fi - if [[ "$A1PMS_FEATURE_LEVEL" == *"NO-DMAAP"* ]]; then - : - else - config_json=$config_json"\n \"streams_publishes\": {" - config_json=$config_json"\n \"dmaap_publisher\": {" - config_json=$config_json"\n \"type\": \"message-router\"," - config_json=$config_json"\n \"dmaap_info\": {" - config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_WRITE_URL\"" - config_json=$config_json"\n }" - config_json=$config_json"\n }" - config_json=$config_json"\n }," - config_json=$config_json"\n \"streams_subscribes\": {" - config_json=$config_json"\n \"dmaap_subscriber\": {" - config_json=$config_json"\n \"type\": \"message-router\"," - config_json=$config_json"\n \"dmaap_info\": {" - config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_READ_URL\"" - config_json=$config_json"\n }" - config_json=$config_json"\n }" - config_json=$config_json"\n }," - fi - - config_json=$config_json"\n \"ric\": [" - - if [ $RUNMODE == "KUBE" ]; then - result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICSIM")].metadata.name}') - rics="" - ric_cntr=0 - if [ $? -eq 0 ] && [ ! -z "$result" ]; then - for im in $result; do - if [[ $im != *"-0" ]]; then - ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}') - rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE - let ric_cntr=ric_cntr+1 - fi - done - fi - result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICMEDIATORSIM")].metadata.name}') - oranrics="" - if [ $? -eq 0 ] && [ ! -z "$result" ]; then - for im in $result; do - if [[ $im != *"-0" ]]; then - ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}') - rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE - oranrics=$oranrics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE - let ric_cntr=ric_cntr+1 - fi - done - fi - if [ $ric_cntr -eq 0 ]; then - echo $YELLOW"Warning: No rics found for the configuration"$EYELLOW - fi - else - rics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "label=a1sim" --filter "status=running" --format {{.Names}}) - if [ $? -ne 0 ] || [ -z "$rics" ]; then - echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED - ((RES_CONF_FAIL++)) - return 1 - fi - oranrics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "label=orana1sim" --filter "status=running" --format {{.Names}}) - if [ $? -ne 0 ] || [ -z "$rics" ]; then - echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED - ((RES_CONF_FAIL++)) - return 1 - fi - rics="$rics $oranrics" - fi - cntr=0 - for ric in $rics; do - if [ $cntr -gt 0 ]; then - config_json=$config_json"\n ," - fi - config_json=$config_json"\n {" - if [ $RUNMODE == "KUBE" ]; then - ric_id=${ric%.*.*} #extract pod id from full hosthame - ric_id=$(echo "$ric_id" | tr '-' '_') - else - if [ $DOCKER_COMPOSE_VERSION == "V1" ]; then - ric_id=$ric - else - ric_id=$(echo "$ric" | tr '-' '_') #ric id still needs underscore as it is different from the container name - fi - fi - echo " Found a1 sim: "$ric_id - config_json=$config_json"\n \"name\": \"$ric_id\"," - - xricfound=0 - for xric in $oranrics; do - if [ $xric == $ric ]; then - xricfound=1 - fi - done - if [ $xricfound -eq 0 ]; then - config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\"," - else - config_json=$config_json"\n \"baseUrl\": \"$RICMEDIATOR_SIM_HTTPX://$ric:$RICMEDIATOR_SIM_PORT\"," - fi - if [ ! -z "$3" ]; then - if [[ $ric == "$3"* ]]; then - config_json=$config_json"\n \"customAdapterClass\": \"$4\"," - fi - fi - if [ $1 == "SDNC" ]; then - config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\"," - fi - config_json=$config_json"\n \"managedElementIds\": [" - config_json=$config_json"\n \"me1_$ric_id\"," - config_json=$config_json"\n \"me2_$ric_id\"" - config_json=$config_json"\n ]" - config_json=$config_json"\n }" - let cntr=cntr+1 - done - - config_json=$config_json"\n ]" - config_json=$config_json"\n}" - - config_json="{\"config\":"$config_json"}" - - printf "$config_json">$2 - - echo "" + echo -e $BOLD"Prepare A1PMS config"$EBOLD + + echo " Writing a1pms config for "$A1PMS_APP_NAME" to file: "$2 + + if [ $# != 2 ] && [ $# != 4 ]; then + ((RES_CONF_FAIL++)) + __print_err "need two or four args, SDNC|NOSDNC [ ]" $@ + exit 1 + fi + + if [ $1 == "SDNC" ]; then + echo -e " Config$BOLD including SDNC$EBOLD configuration" + elif [ $1 == "NOSDNC" ]; then + echo -e " Config$BOLD excluding SDNC$EBOLD configuration" + else + ((RES_CONF_FAIL++)) + __print_err "need three args, SDNC|NOSDNC HEADER|NOHEADER" $@ + exit 1 + fi + + config_json="\n {" + if [ $1 == "SDNC" ]; then + config_json=$config_json"\n \"controller\": [" + config_json=$config_json"\n {" + config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\"," + config_json=$config_json"\n \"baseUrl\": \"$SDNC_SERVICE_PATH\"," + config_json=$config_json"\n \"userName\": \"$SDNC_USER\"," + config_json=$config_json"\n \"password\": \"$SDNC_PWD\"" + config_json=$config_json"\n }" + config_json=$config_json"\n ]," + fi + if [[ "$A1PMS_FEATURE_LEVEL" == *"NO-DMAAP"* ]]; then + : + else + config_json=$config_json"\n \"streams_publishes\": {" + config_json=$config_json"\n \"dmaap_publisher\": {" + config_json=$config_json"\n \"type\": \"message-router\"," + config_json=$config_json"\n \"dmaap_info\": {" + config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_WRITE_URL\"" + config_json=$config_json"\n }" + config_json=$config_json"\n }" + config_json=$config_json"\n }," + config_json=$config_json"\n \"streams_subscribes\": {" + config_json=$config_json"\n \"dmaap_subscriber\": {" + config_json=$config_json"\n \"type\": \"message-router\"," + config_json=$config_json"\n \"dmaap_info\": {" + config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_READ_URL\"" + config_json=$config_json"\n }" + config_json=$config_json"\n }" + config_json=$config_json"\n }," + fi + + config_json=$config_json"\n \"ric\": [" + + if [ $RUNMODE == "KUBE" ]; then + result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICSIM")].metadata.name}') + rics="" + ric_cntr=0 + if [ $? -eq 0 ] && [ ! -z "$result" ]; then + for im in $result; do + if [[ $im != *"-0" ]]; then + ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}') + rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE + let ric_cntr=ric_cntr+1 + fi + done + fi + result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICMEDIATORSIM")].metadata.name}') + oranrics="" + if [ $? -eq 0 ] && [ ! -z "$result" ]; then + for im in $result; do + if [[ $im != *"-0" ]]; then + ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}') + rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE + oranrics=$oranrics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE + let ric_cntr=ric_cntr+1 + fi + done + fi + if [ $ric_cntr -eq 0 ]; then + echo $YELLOW"Warning: No rics found for the configuration"$EYELLOW + fi + else + rics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "label=a1sim" --filter "status=running" --format {{.Names}}) + oranrics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "label=orana1sim" --filter "status=running" --format {{.Names}}) + + rics="$rics $oranrics" + + if [ $? -ne 0 ] || [ -z "$rics" ]; then + echo -e $RED" FAIL - the names of the running RIC Simulator or ORAN RIC cannot be retrieved." $ERED + ((RES_CONF_FAIL++)) + exit 1 + fi + fi + cntr=0 + for ric in $rics; do + if [ $cntr -gt 0 ]; then + config_json=$config_json"\n ," + fi + config_json=$config_json"\n {" + if [ $RUNMODE == "KUBE" ]; then + ric_id=${ric%.*.*} #extract pod id from full hosthame + ric_id=$(echo "$ric_id" | tr '-' '_') + else + ric_id=$(echo "$ric" | tr '-' '_') #ric var still needs underscore as it is different from the container name + fi + echo " Found a1 sim: "$ric + config_json=$config_json"\n \"name\": \"$ric_id\"," + + xricfound=0 + for xric in $oranrics; do + if [ $xric == $ric ]; then + xricfound=1 + fi + done + if [ $xricfound -eq 0 ]; then + config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\"," + else + config_json=$config_json"\n \"baseUrl\": \"$RICMEDIATOR_SIM_HTTPX://$ric:$RICMEDIATOR_SIM_PORT\"," + fi + if [ ! -z "$3" ]; then + if [[ $ric == "$3"* ]]; then + config_json=$config_json"\n \"customAdapterClass\": \"$4\"," + fi + fi + if [ $1 == "SDNC" ]; then + config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\"," + fi + config_json=$config_json"\n \"managedElementIds\": [" + config_json=$config_json"\n \"me1_$ric_id\"," + config_json=$config_json"\n \"me2_$ric_id\"" + config_json=$config_json"\n ]" + config_json=$config_json"\n }" + let cntr=cntr+1 + done + + config_json=$config_json"\n ]" + config_json=$config_json"\n}" + + config_json="{\"config\":"$config_json"}" + + printf "$config_json" >$2 + + echo "" } # Load the the appl config for the a1pms into a config map a1pms_load_config() { - echo -e $BOLD"A1PMS - load config from "$EBOLD$1 - data_json=$PWD/tmp/$A1PMS_DATA_FILE - cp $1 $data_json - output_yaml=$PWD/tmp/a1pms-cfd.yaml - __kube_create_configmap $A1PMS_APP_NAME"-data" $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml - echo "" + echo -e $BOLD"A1PMS - load config from "$EBOLD$1 + data_json=$PWD/tmp/$A1PMS_DATA_FILE + cp $1 $data_json + output_yaml=$PWD/tmp/a1pms-cfd.yaml + __kube_create_configmap $A1PMS_APP_NAME"-data" $KUBE_NONRTRIC_NAMESPACE autotest A1PMS $data_json $output_yaml + echo "" } - # Turn on debug level tracing in the a1pms # args: - # (Function for test scripts) set_a1pms_debug() { - echo -e $BOLD"Setting a1pms debug logging"$EBOLD - curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}" - result=$(__do_curl "$curlString") - if [ $? -ne 0 ]; then - __print_err "could not set debug mode" $@ - ((RES_CONF_FAIL++)) - return 1 - fi - echo "" - return 0 + echo -e $BOLD"Setting a1pms debug logging"$EBOLD + curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}" + result=$(__do_curl "$curlString") + if [ $? -ne 0 ]; then + __print_err "could not set debug mode" $@ + ((RES_CONF_FAIL++)) + return 1 + fi + echo "" + return 0 } # Turn on trace level tracing in the a1pms # args: - # (Function for test scripts) set_a1pms_trace() { - echo -e $BOLD"Setting a1pms trace logging"$EBOLD - curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}" - result=$(__do_curl "$curlString") - if [ $? -ne 0 ]; then - __print_err "could not set trace mode" $@ - ((RES_CONF_FAIL++)) - return 1 - fi - echo "" - return 0 + echo -e $BOLD"Setting a1pms trace logging"$EBOLD + curlString="$A1PMS_SERVICE_PATH$A1PMS_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}" + result=$(__do_curl "$curlString") + if [ $? -ne 0 ]; then + __print_err "could not set trace mode" $@ + ((RES_CONF_FAIL++)) + return 1 + fi + echo "" + return 0 } # Perform curl retries when making direct call to the a1pms for the specified http response codes # Speace separated list of http response codes # args: []* use_a1pms_retries() { - echo -e $BOLD"Do curl retries to the a1pms REST inteface for these response codes:$@"$EBOLD - AGENT_RETRY_CODES=$@ - echo "" - return + echo -e $BOLD"Do curl retries to the a1pms REST inteface for these response codes:$@"$EBOLD + AGENT_RETRY_CODES=$@ + echo "" + return } # Check the a1pms logs for WARNINGs and ERRORs # args: - # (Function for test scripts) check_a1pms_logs() { - __check_container_logs "A1PMS" $A1PMS_APP_NAME $A1PMS_LOGPATH WARN ERR + __check_container_logs "A1PMS" $A1PMS_APP_NAME $A1PMS_LOGPATH WARN ERR } ######################################################### @@ -682,19 +672,22 @@ check_a1pms_logs() { # args: json: [> $HTTPLOG - if [ $# -eq 2 ] || [ $# -eq 3 ]; then - if [[ $1 == "json:"* ]]; then - if [ "$A1PMS_VERSION" == "V2" ]; then - __var_test "A1PMS" $A1PMS_SERVICE_PATH$A1PMS_API_PREFIX"/v2/" $1 "=" $2 $3 - else - __var_test "A1PMS" $A1PMS_SERVICE_PATH"/" $1 "=" $2 $3 - fi - return 0 - fi - fi - __print_err "needs two or three args: json: [ timeout ]" $@ - return 1 + echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >>$HTTPLOG + if [ $# -eq 2 ] || [ $# -eq 3 ]; then + if [[ $1 == "json:"* ]]; then + if [ "$A1PMS_VERSION" == "V2" ]; then + __var_test "A1PMS" $A1PMS_SERVICE_PATH$A1PMS_API_PREFIX"/v2/" $1 "=" $2 $3 + elif [ "$A1PMS_VERSION" == "V3" ]; then + echo "var test execution for V3" + __var_test "A1PMS" $A1PMS_SERVICE_PATH$A1PMS_API_PREFIX"/v1/" $1 "=" $2 $3 + else + __var_test "A1PMS" $A1PMS_SERVICE_PATH"/" $1 "=" $2 $3 + fi + return 0 + fi + fi + __print_err "needs two or three args: json: [ timeout ]" $@ + return 1 } # API Test function: GET /policies and V2 GET /v2/policy-instances @@ -702,255 +695,272 @@ a1pms_equal() { # args(V2): |NORIC |NOSERVICE |NOTYPE [ NOID | [ EMPTY| ]*] # (Function for test scripts) a1pms_api_get_policies() { - __log_test_start $@ - - if [ "$A1PMS_VERSION" == "V2" ]; then - paramError=0 - variableParams=$(($#-4)) - if [ $# -lt 4 ]; then - paramError=1 - elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then - paramError=1 - elif [ $# -gt 5 ] && [ $(($variableParams%7)) -ne 0 ]; then - paramError=1 - fi - - if [ $paramError -ne 0 ]; then - __print_err " |NORIC |NOSERVICE |NOTYPE [ NOID | [ EMPTY| ]*]" $@ - return 1 - fi - else - paramError=0 - variableParams=$(($#-4)) - if [ $# -lt 4 ]; then - paramError=1 - elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then - paramError=1 - elif [ $# -gt 5 ] && [ $(($variableParams%5)) -ne 0 ]; then - paramError=1 - fi - - if [ $paramError -ne 0 ]; then - __print_err " |NORIC |NOSERVICE |NOTYPE [ NOID | [ EMPTY| ]*]" $@ - return 1 - fi - fi - - queryparams="" - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $2 != "NORIC" ]; then - queryparams="?ric_id="$2 - fi - if [ $3 != "NOSERVICE" ]; then - if [ -z $queryparams ]; then - queryparams="?service_id="$3 - else - queryparams=$queryparams"&service_id="$3 - fi - fi - if [ $4 != "NOTYPE" ]; then - if [ -z $queryparams ]; then - queryparams="?policytype_id="$4 - else - queryparams=$queryparams"&policytype_id="$4 - fi - fi - - query="/v2/policy-instances"$queryparams - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -gt 4 ]; then - body=${res:0:${#res}-3} - if [ $# -eq 5 ] && [ $5 == "NOID" ]; then - targetJson="[" - else - targetJson="[" - arr=(${@:5}) - - for ((i=0; i<$(($#-4)); i=i+7)); do - - if [ "$targetJson" != "[" ]; then - targetJson=$targetJson"," - fi - targetJson=$targetJson"{\"policy_id\":\"$UUID${arr[$i]}\",\"ric_id\":\"${arr[$i+1]}\",\"service_id\":\"${arr[$i+2]}\",\"policytype_id\":" - if [ "${arr[$i+3]}" == "EMPTY" ]; then - targetJson=$targetJson"\"\"," - else - targetJson=$targetJson"\"${arr[$i+3]}\"," - fi - targetJson=$targetJson"\"transient\":${arr[$i+4]},\"status_notification_uri\":\"${arr[$i+5]}\"," - file="./tmp/.p.json" - sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+6]} > $file - json=$(cat $file) - targetJson=$targetJson"\"policy_data\":"$json"}" - done - fi - - targetJson=$targetJson"]" - targetJson="{\"policies\": $targetJson}" - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - else - if [ $2 != "NORIC" ]; then - queryparams="?ric="$2 - fi - if [ $3 != "NOSERVICE" ]; then - if [ -z $queryparams ]; then - queryparams="?service="$3 - else - queryparams=$queryparams"&service="$3 - fi - fi - if [ $4 != "NOTYPE" ]; then - if [ -z $queryparams ]; then - queryparams="?type="$4 - else - queryparams=$queryparams"&type="$4 - fi - fi - - query="/policies"$queryparams - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -gt 4 ]; then - if [ $# -eq 5 ] && [ $5 == "NOID" ]; then - targetJson="[" - else - body=${res:0:${#res}-3} - targetJson="[" - arr=(${@:5}) - - for ((i=0; i<$(($#-4)); i=i+5)); do - - if [ "$targetJson" != "[" ]; then - targetJson=$targetJson"," - fi - targetJson=$targetJson"{\"id\":\"$UUID${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i+1]}\",\"service\":\"${arr[$i+2]}\",\"type\":" - if [ "${arr[$i+3]}" == "EMPTY" ]; then - targetJson=$targetJson"\"\"," - else - targetJson=$targetJson"\"${arr[$i+3]}\"," - fi - file="./tmp/.p.json" - sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+4]} > $file - json=$(cat $file) - targetJson=$targetJson"\"json\":"$json"}" - done - fi - - targetJson=$targetJson"]" - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - fi - __collect_endpoint_stats "A1PMS" 00 "GET" $A1PMS_API_PREFIX"/v2/policy-instances" $status - __log_test_pass - return 0 + __log_test_start $@ -} + if [ "$A1PMS_VERSION" == "V2" ]; then + paramError=0 + variableParams=$(($# - 4)) + if [ $# -lt 4 ]; then + paramError=1 + elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then + paramError=1 + elif [ $# -gt 5 ] && [ $(($variableParams % 7)) -ne 0 ]; then + paramError=1 + fi + + if [ $paramError -ne 0 ]; then + __print_err " |NORIC |NOSERVICE |NOTYPE [ NOID | [ EMPTY| ]*]" $@ + return 1 + fi + else + paramError=0 + variableParams=$(($# - 4)) + if [ $# -lt 4 ]; then + paramError=1 + elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then + paramError=1 + elif [ $# -gt 5 ] && [ $(($variableParams % 5)) -ne 0 ]; then + paramError=1 + fi + + if [ $paramError -ne 0 ]; then + __print_err " |NORIC |NOSERVICE |NOTYPE [ NOID | [ EMPTY| ]*]" $@ + return 1 + fi + fi + + queryparams="" + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $2 != "NORIC" ]; then + queryparams="?ric_id="$2 + fi + if [ $3 != "NOSERVICE" ]; then + if [ -z $queryparams ]; then + queryparams="?service_id="$3 + else + queryparams=$queryparams"&service_id="$3 + fi + fi + if [ $4 != "NOTYPE" ]; then + if [ -z $queryparams ]; then + queryparams="?policytype_id="$4 + else + queryparams=$queryparams"&policytype_id="$4 + fi + fi + + query="/v2/policy-instances"$queryparams + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + if [ $# -gt 4 ]; then + body=${res:0:${#res}-3} + if [ $# -eq 5 ] && [ $5 == "NOID" ]; then + targetJson="[" + else + targetJson="[" + arr=(${@:5}) + + for ((i = 0; i < $(($# - 4)); i = i + 7)); do + + if [ "$targetJson" != "[" ]; then + targetJson=$targetJson"," + fi + targetJson=$targetJson"{\"policy_id\":\"$UUID${arr[$i]}\",\"ric_id\":\"${arr[$i + 1]}\",\"service_id\":\"${arr[$i + 2]}\",\"policytype_id\":" + if [ "${arr[$i + 3]}" == "EMPTY" ]; then + targetJson=$targetJson"\"\"," + else + targetJson=$targetJson"\"${arr[$i + 3]}\"," + fi + targetJson=$targetJson"\"transient\":${arr[$i + 4]},\"status_notification_uri\":\"${arr[$i + 5]}\"," + file="./tmp/.p.json" + sed 's/XXX/'${arr[$i]}'/g' ${arr[$i + 6]} >$file + json=$(cat $file) + targetJson=$targetJson"\"policy_data\":"$json"}" + done + fi + + targetJson=$targetJson"]" + targetJson="{\"policies\": $targetJson}" + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + else + if [ $2 != "NORIC" ]; then + queryparams="?ric="$2 + fi + if [ $3 != "NOSERVICE" ]; then + if [ -z $queryparams ]; then + queryparams="?service="$3 + else + queryparams=$queryparams"&service="$3 + fi + fi + if [ $4 != "NOTYPE" ]; then + if [ -z $queryparams ]; then + queryparams="?type="$4 + else + queryparams=$queryparams"&type="$4 + fi + fi -# API Test function: GET /policy and V2 GET /v2/policies/{policy_id} + query="/policies"$queryparams + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 4 ]; then + if [ $# -eq 5 ] && [ $5 == "NOID" ]; then + targetJson="[" + else + body=${res:0:${#res}-3} + targetJson="[" + arr=(${@:5}) + + for ((i = 0; i < $(($# - 4)); i = i + 5)); do + + if [ "$targetJson" != "[" ]; then + targetJson=$targetJson"," + fi + targetJson=$targetJson"{\"id\":\"$UUID${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i + 1]}\",\"service\":\"${arr[$i + 2]}\",\"type\":" + if [ "${arr[$i + 3]}" == "EMPTY" ]; then + targetJson=$targetJson"\"\"," + else + targetJson=$targetJson"\"${arr[$i + 3]}\"," + fi + file="./tmp/.p.json" + sed 's/XXX/'${arr[$i]}'/g' ${arr[$i + 4]} >$file + json=$(cat $file) + targetJson=$targetJson"\"json\":"$json"}" + done + fi + + targetJson=$targetJson"]" + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + fi + __collect_endpoint_stats "A1PMS" 00 "GET" $A1PMS_API_PREFIX"/v2/policy-instances" $status + __log_test_pass + return 0 + +} + +# API Test function: GET /policy, V2 GET /v2/policies/{policy_id} and V3 GET a1policymanagement/v1/policies/{policy_id} # args: [] # args(V2): [ |NOTYPE |NOURL ] - # (Function for test scripts) a1pms_api_get_policy() { - __log_test_start $@ - - - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $# -ne 2 ] && [ $# -ne 8 ]; then - __print_err " [ |NOTYPE |NOURL ]" $@ - return 1 - fi - query="/v2/policies/$UUID$2" - else - if [ $# -lt 2 ] || [ $# -gt 3 ]; then - __print_err " [] " $@ - return 1 - fi - query="/policy?id=$UUID$2" - fi - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $# -eq 8 ]; then - - #Create a policy json to compare with - body=${res:0:${#res}-3} - - targetJson="\"ric_id\":\"$5\",\"policy_id\":\"$UUID$2\",\"service_id\":\"$4\"" - if [ $7 != "NOTRANSIENT" ]; then - targetJson=$targetJson", \"transient\":$7" - fi - if [ $6 != "NOTYPE" ]; then - targetJson=$targetJson", \"policytype_id\":\"$6\"" - else - targetJson=$targetJson", \"policytype_id\":\"\"" - fi - if [ $8 != "NOURL" ]; then - targetJson=$targetJson", \"status_notification_uri\":\"$8\"" - fi - - data=$(sed 's/XXX/'${2}'/g' $3) - targetJson=$targetJson", \"policy_data\":$data" - targetJson="{$targetJson}" - - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - else - if [ $# -eq 3 ]; then - #Create a policy json to compare with - body=${res:0:${#res}-3} - file="./tmp/.p.json" - sed 's/XXX/'${2}'/g' $3 > $file - targetJson=$(< $file) - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - if [ $res -ne 0 ]; then - __log_test_fail_body - fi - fi - fi - - __collect_endpoint_stats "A1PMS" 01 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $status - __log_test_pass - return 0 + __log_test_start $@ + + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $# -ne 2 ] && [ $# -ne 8 ]; then + __print_err " [ |NOTYPE |NOURL ]" $@ + return 1 + fi + query="/v2/policies/$UUID$2" + elif [ "$A1PMS_VERSION" == "V3" ]; then + if [ $# -ne 2 ] && [ $# -ne 8 ]; then + __print_err " [ |NOTYPE |NOURL ]" $@ + return 1 + fi + query="/v1/policies/$UUID$2" + else + if [ $# -lt 2 ] || [ $# -gt 3 ]; then + __print_err " [] " $@ + return 1 + fi + query="/policy?id=$UUID$2" + fi + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $# -eq 8 ]; then + + #Create a policy json to compare with + body=${res:0:${#res}-3} + + targetJson="\"ric_id\":\"$5\",\"policy_id\":\"$UUID$2\",\"service_id\":\"$4\"" + if [ $7 != "NOTRANSIENT" ]; then + targetJson=$targetJson", \"transient\":$7" + fi + if [ $6 != "NOTYPE" ]; then + targetJson=$targetJson", \"policytype_id\":\"$6\"" + else + targetJson=$targetJson", \"policytype_id\":\"\"" + fi + if [ $8 != "NOURL" ]; then + targetJson=$targetJson", \"status_notification_uri\":\"$8\"" + fi + + data=$(sed 's/XXX/'${2}'/g' $3) + targetJson=$targetJson", \"policy_data\":$data" + targetJson="{$targetJson}" + + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + elif [ "$A1PMS_VERSION" == "V3" ]; then + if [ $# -eq 8 ]; then + #Create a policy json to compare with + body=${res:0:${#res}-3} + data=$(sed 's/XXX/'${2}'/g' $3) + targetJson=$data + + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + else + if [ $# -eq 3 ]; then + #Create a policy json to compare with + body=${res:0:${#res}-3} + file="./tmp/.p.json" + sed 's/XXX/'${2}'/g' $3 >$file + targetJson=$(<$file) + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + if [ $res -ne 0 ]; then + __log_test_fail_body + fi + fi + fi + + __collect_endpoint_stats "A1PMS" 01 "GET" ${A1PMS_API_PREFIX}${query} ${status} + __log_test_pass + return 0 } # API Test function: PUT /policy and V2 PUT /policies @@ -958,94 +968,209 @@ a1pms_api_get_policy() { # args(V2): |NOTYPE |NOTRANSIENT |NOURL [] # (Function for test scripts) a1pms_api_put_policy() { - __log_test_start $@ - - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $# -lt 8 ] || [ $# -gt 9 ]; then - __print_err " |NOTYPE |NOTRANSIENT |NOURL []" $@ - return 1 - fi - else - if [ $# -lt 7 ] || [ $# -gt 8 ]; then - __print_err " |NOTYPE |NOTRANSIENT []" $@ - return 1 - fi - fi - - count=0 - max=1 - serv=$2 - ric=$3 - pt=$4 - pid=$5 - trans=$6 - - if [ "$A1PMS_VERSION" == "V2" ]; then - noti=$7 - temp=$8 - if [ $# -eq 9 ]; then - max=$9 - fi - else - temp=$7 - if [ $# -eq 8 ]; then - max=$8 - fi - fi - - while [ $count -lt $max ]; do - if [ "$A1PMS_VERSION" == "V2" ]; then - - query="/v2/policies" - - inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\"" - if [ $trans != "NOTRANSIENT" ]; then - inputJson=$inputJson", \"transient\":$trans" - fi - if [ $pt != "NOTYPE" ]; then - inputJson=$inputJson", \"policytype_id\":\"$pt\"" - else - inputJson=$inputJson", \"policytype_id\":\"\"" - fi - if [ $noti != "NOURL" ]; then - inputJson=$inputJson", \"status_notification_uri\":\"$noti\"" - fi - file="./tmp/.p.json" - data=$(sed 's/XXX/'${pid}'/g' $temp) - inputJson=$inputJson", \"policy_data\":$data" - inputJson="{$inputJson}" - echo $inputJson > $file - else - query="/policy?id=$UUID$pid&ric=$ric&service=$serv" - - if [ $pt != "NOTYPE" ]; then - query=$query"&type=$pt" - fi - - if [ $trans != NOTRANSIENT ]; then - query=$query"&transient=$trans" - fi - - file="./tmp/.p.json" - sed 's/XXX/'${pid}'/g' $temp > $file - fi - res="$(__do_curl_to_api A1PMS PUT $query $file)" - status=${res:${#res}-3} - echo -ne " Executing "$count"("$max")${SAMELINE}" - if [ $status -ne $1 ]; then - echo " Executed "$count"?("$max")" - __log_test_fail_status_code $1 $status - return 1 - fi - let pid=$pid+1 - let count=$count+1 - echo -ne " Executed "$count"("$max")${SAMELINE}" - done - __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $status $max - echo "" - - __log_test_pass - return 0 + __log_test_start $@ + + if [ "$A1PMS_VERSION" == "V2" ] || [ "$A1PMS_VERSION" == "V3" ]; then + if [ $# -lt 8 ] || [ $# -gt 9 ]; then + __print_err " |NOTYPE |NOTRANSIENT |NOURL []" $@ + return 1 + fi + else + if [ $# -lt 7 ] || [ $# -gt 8 ]; then + __print_err " |NOTYPE |NOTRANSIENT []" $@ + return 1 + fi + fi + + count=0 + max=1 + serv=$2 + ric=$3 + pt=$4 + pid=$5 + trans=$6 + + if [ "$A1PMS_VERSION" == "V2" ]; then + noti=$7 + temp=$8 + if [ $# -eq 9 ]; then + max=$9 + fi + else + temp=$7 + if [ $# -eq 8 ]; then + max=$8 + fi + fi + + while [ $count -lt $max ]; do + if [ "$A1PMS_VERSION" == "V2" ]; then + + query="/v2/policies" + + inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\"" + if [ $trans != "NOTRANSIENT" ]; then + inputJson=$inputJson", \"transient\":$trans" + fi + if [ $pt != "NOTYPE" ]; then + inputJson=$inputJson", \"policytype_id\":\"$pt\"" + else + inputJson=$inputJson", \"policytype_id\":\"\"" + fi + if [ $noti != "NOURL" ]; then + inputJson=$inputJson", \"status_notification_uri\":\"$noti\"" + fi + file="./tmp/.p.json" + data=$(sed 's/XXX/'${pid}'/g' $temp) + inputJson=$inputJson", \"policy_data\":$data" + inputJson="{$inputJson}" + echo $inputJson >$file + else + query="/policy?id=$UUID$pid&ric=$ric&service=$serv" + + if [ $pt != "NOTYPE" ]; then + query=$query"&type=$pt" + fi + + if [ $trans != NOTRANSIENT ]; then + query=$query"&transient=$trans" + fi + + file="./tmp/.p.json" + sed 's/XXX/'${pid}'/g' $temp >$file + fi + res="$(__do_curl_to_api A1PMS PUT $query $file)" + status=${res:${#res}-3} + echo -ne " Executing "$count"("$max")${SAMELINE}" + if [ $status -ne $1 ]; then + echo " Executed "$count"?("$max")" + __log_test_fail_status_code $1 $status + return 1 + fi + let pid=$pid+1 + let count=$count+1 + echo -ne " Executed "$count"("$max")${SAMELINE}" + done + __collect_endpoint_stats "A1PMS" 02 "PUT" ${A1PMS_API_PREFIX}${query} ${status} ${max} + echo "" + + __log_test_pass + return 0 +} + +# API Test function: V3 PUT a1policymanagement/v1/policies +# args: [] +# args(V2): [] +# (Function for test scripts) +a1pms_api_put_policy_v3() { + __log_test_start $@ + + if [ $# -lt 3 ] || [ $# -gt 4 ]; then + __print_err " []" $@ + return 1 + fi + + count=0 + max=1 + pid=$2 + temp=$3 + + if [ $# -eq 4 ]; then + max=$4 + fi + + while [ $count -lt $max ]; do + query="/v1/policies/$UUID$pid" + file="./tmp/.p_v3.json" + let update_value=$pid+300 + data=$(sed 's/XXX/'${update_value}'/g' $temp) + inputJson="$data" + echo $inputJson >$file + res="$(__do_curl_to_api A1PMS PUT $query $file)" + status=${res:${#res}-3} + echo -ne " Executing "$count"("$max")${SAMELINE}" + if [ $status -ne $1 ]; then + echo " Executed "$count"?("$max")" + __log_test_fail_status_code $1 $status + return 1 + fi + let pid=$pid+1 + let count=$count+1 + echo -ne " Executed "$count"("$max")${SAMELINE}" + done + __collect_endpoint_stats "A1PMS" 02 "PUT" ${A1PMS_API_PREFIX}${query} ${status} ${max} + echo "" + + __log_test_pass + return 0 +} + +# API Test function: V£ POST a1policymanagement/v1/policies +# args: |NOTYPE |NOTRANSIENT [] +# args(V2): |NOTYPE |NOTRANSIENT |NOURL [] +# (Function for test scripts) +a1pms_api_post_policy_v3() { + __log_test_start $@ + + if [ $# -lt 8 ] || [ $# -gt 9 ]; then + __print_err " |NOTYPE |NOTRANSIENT |NOURL []" $@ + return 1 + fi + + count=0 + max=1 + serv=$2 + ric=$3 + pt=$4 + pid=$5 + trans=$6 + noti=$7 + temp=$8 + if [ $# -eq 9 ]; then + max=$9 + fi + + while [ $count -lt $max ]; do + query="/v1/policies" + + inputJson="\"nearRtRicId\":\"$ric\"" + if [ $pt != "NOTYPE" ]; then + inputJson=$inputJson", \"policyTypeId\":\"$pt\"" + else + inputJson=$inputJson", \"policyTypeId\":\"\"" + fi + if [ $serv != "NOSERVICE" ]; then + inputJson=$inputJson", \"serviceId\":\"$serv\"" + fi + if [ $noti != "NONOTIFYURL" ]; then + inputJson=$inputJson", \"statusNotificationUri\":\"$noti\"" + fi + if [ $trans != "NOTRANSIENT" ]; then + inputJson=$inputJson", \"transient\":\"$trans\"" + fi + file="./tmp/.p.json" + data=$(sed 's/XXX/'${pid}'/g' $temp) + inputJson=$inputJson", \"policyObject\":$data" + inputJson=$inputJson", \"policyId\":\"$UUID$pid\"" + inputJson="{$inputJson}" + echo $inputJson >$file + res="$(__do_curl_to_api A1PMS POST $query $file)" + status=${res:${#res}-3} + echo -ne " Executing "$count"("$max")${SAMELINE}" + if [ $status -ne $1 ]; then + echo " Executed "$count"?("$max")" + __log_test_fail_status_code $1 $status + return 1 + fi + let pid=$pid+1 + let count=$count+1 + echo -ne " Executed "$count"("$max")${SAMELINE}" + done + __collect_endpoint_stats "A1PMS" 02 "PUT" ${A1PMS_API_PREFIX}${A1PMS_VERSION} ${status} ${max} + echo "" + + __log_test_pass + return 0 } # API Test function: PUT /policy and V2 PUT /policies, to run in batch @@ -1054,114 +1179,114 @@ a1pms_api_put_policy() { # (Function for test scripts) a1pms_api_put_policy_batch() { - __log_test_start $@ - - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $# -lt 8 ] || [ $# -gt 9 ]; then - __print_err " |NOTYPE |NOURL []" $@ - return 1 - fi - else - if [ $# -lt 7 ] || [ $# -gt 8 ]; then - __print_err " |NOTYPE []" $@ - return 1 - fi - fi - - count=0 - max=1 - serv=$2 - ric=$3 - pt=$4 - pid=$5 - trans=$6 - if [ "$A1PMS_VERSION" == "V2" ]; then - noti=$7 - temp=$8 - if [ $# -eq 9 ]; then - max=$9 - fi - else - temp=$7 - if [ $# -eq 8 ]; then - max=$8 - fi - fi - - ARR="" - while [ $count -lt $max ]; do - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/policies" - - inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\"" - if [ $trans != "NOTRANSIENT" ]; then - inputJson=$inputJson", \"transient\":$trans" - fi - if [ $pt != "NOTYPE" ]; then - inputJson=$inputJson", \"policytype_id\":\"$pt\"" - else - inputJson=$inputJson", \"policytype_id\":\"\"" - fi - if [ $noti != "NOURL" ]; then - inputJson=$inputJson", \"status_notification_uri\":\"$noti\"" - fi - file="./tmp/.p.json" - data=$(sed 's/XXX/'${pid}'/g' $temp) - inputJson=$inputJson", \"policy_data\":$data" - inputJson="{$inputJson}" - echo $inputJson > $file - else - query="/policy?id=$UUID$pid&ric=$ric&service=$serv" - - if [ $pt != "NOTYPE" ]; then - query=$query"&type=$pt" - fi - - if [ $trans != NOTRANSIENT ]; then - query=$query"&transient=$trans" - fi - file="./tmp/.p.json" - sed 's/XXX/'${pid}'/g' $temp > $file - fi - res="$(__do_curl_to_api A1PMS PUT_BATCH $query $file)" - status=${res:${#res}-3} - echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}" - - if [ $status -ne 200 ]; then - echo " Requested(batch) "$count"?("$max")" - __log_test_fail_status_code 200 $status - return 1 - fi - cid=${res:0:${#res}-3} - ARR=$ARR" "$cid - let pid=$pid+1 - let count=$count+1 - echo -ne " Requested(batch) "$count"("$max")${SAMELINE}" - done - - echo "" - count=0 - for cid in $ARR; do - - res="$(__do_curl_to_api A1PMS RESPONSE $cid)" - status=${res:${#res}-3} - echo -ne " Accepting(batch) "$count"("$max")${SAMELINE}" - - if [ $status -ne $1 ]; then - echo " Accepted(batch) "$count"?("$max")" - __log_test_fail_status_code $1 $status - return 1 - fi - - let count=$count+1 - echo -ne " Accepted(batch) "$count"("$max")${SAMELINE}" - done - __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $1 $max - - echo "" - - __log_test_pass - return 0 + __log_test_start $@ + + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $# -lt 8 ] || [ $# -gt 9 ]; then + __print_err " |NOTYPE |NOURL []" $@ + return 1 + fi + else + if [ $# -lt 7 ] || [ $# -gt 8 ]; then + __print_err " |NOTYPE []" $@ + return 1 + fi + fi + + count=0 + max=1 + serv=$2 + ric=$3 + pt=$4 + pid=$5 + trans=$6 + if [ "$A1PMS_VERSION" == "V2" ]; then + noti=$7 + temp=$8 + if [ $# -eq 9 ]; then + max=$9 + fi + else + temp=$7 + if [ $# -eq 8 ]; then + max=$8 + fi + fi + + ARR="" + while [ $count -lt $max ]; do + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/policies" + + inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\"" + if [ $trans != "NOTRANSIENT" ]; then + inputJson=$inputJson", \"transient\":$trans" + fi + if [ $pt != "NOTYPE" ]; then + inputJson=$inputJson", \"policytype_id\":\"$pt\"" + else + inputJson=$inputJson", \"policytype_id\":\"\"" + fi + if [ $noti != "NOURL" ]; then + inputJson=$inputJson", \"status_notification_uri\":\"$noti\"" + fi + file="./tmp/.p.json" + data=$(sed 's/XXX/'${pid}'/g' $temp) + inputJson=$inputJson", \"policy_data\":$data" + inputJson="{$inputJson}" + echo $inputJson >$file + else + query="/policy?id=$UUID$pid&ric=$ric&service=$serv" + + if [ $pt != "NOTYPE" ]; then + query=$query"&type=$pt" + fi + + if [ $trans != NOTRANSIENT ]; then + query=$query"&transient=$trans" + fi + file="./tmp/.p.json" + sed 's/XXX/'${pid}'/g' $temp >$file + fi + res="$(__do_curl_to_api A1PMS PUT_BATCH $query $file)" + status=${res:${#res}-3} + echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}" + + if [ $status -ne 200 ]; then + echo " Requested(batch) "$count"?("$max")" + __log_test_fail_status_code 200 $status + return 1 + fi + cid=${res:0:${#res}-3} + ARR=$ARR" "$cid + let pid=$pid+1 + let count=$count+1 + echo -ne " Requested(batch) "$count"("$max")${SAMELINE}" + done + + echo "" + count=0 + for cid in $ARR; do + + res="$(__do_curl_to_api A1PMS RESPONSE $cid)" + status=${res:${#res}-3} + echo -ne " Accepting(batch) "$count"("$max")${SAMELINE}" + + if [ $status -ne $1 ]; then + echo " Accepted(batch) "$count"?("$max")" + __log_test_fail_status_code $1 $status + return 1 + fi + + let count=$count+1 + echo -ne " Accepted(batch) "$count"("$max")${SAMELINE}" + done + __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $1 $max + + echo "" + + __log_test_pass + return 0 } # API Test function: PUT /policy and V2 PUT /policies, to run in i parallel for a number of rics @@ -1169,490 +1294,998 @@ a1pms_api_put_policy_batch() { # args(V2): |NOURL # (Function for test scripts) a1pms_api_put_policy_parallel() { - __log_test_start $@ - - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $# -ne 11 ]; then - __print_err " |NOURL " $@ - return 1 - fi - else - if [ $# -ne 10 ]; then - __print_err " " $@ - return 1 - fi - fi - resp_code=$1; shift; - serv=$1; shift - ric_base=$1; shift; - num_rics=$1; shift; - type=$1; shift; - start_id=$1; shift; - transient=$1; shift; - if [ "$A1PMS_VERSION" == "V2" ]; then - noti=$1; shift; - else - noti="" - fi - template=$1; shift; - count=$1; shift; - pids=$1; shift; - - #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then - if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then - echo " Info - a1pms_api_put_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported" - echo " Info - will execute over a1pms REST" - fi - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $serv == "NOSERVICE" ]; then - serv="" - fi - query="$A1PMS_API_PREFIX/v2/policies" - else - if [ $serv == "NOSERVICE" ]; then - serv="" - fi - query="/policy?service=$serv" - - if [ $type != "NOTYPE" ]; then - query=$query"&type=$type" - fi - - if [ $transient != NOTRANSIENT ]; then - query=$query"&transient=$transient" - fi - fi - - urlbase=${A1PMS_ADAPTER}${query} - - httpproxy="NOPROXY" - if [ ! -z "$KUBE_PROXY_PATH" ]; then - httpproxy=$KUBE_PROXY_PATH - fi - - for ((i=1; i<=$pids; i++)) - do - uuid=$UUID - if [ -z "$uuid" ]; then - uuid="NOUUID" - fi - echo "" > "./tmp/.pid${i}.res.txt" - if [ "$A1PMS_VERSION" == "V2" ]; then - echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt" - else - echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt" - fi - echo $i - done | xargs -n 1 -I{} -P $pids bash -c '{ + __log_test_start $@ + + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $# -ne 11 ]; then + __print_err "These all arguments needed |NOURL " $@ + return 1 + fi + fi + + resp_code=$1 + shift + serv=$1 + shift + ric_base=$1 + shift + num_rics=$1 + shift + type=$1 + shift + start_id=$1 + shift + transient=$1 + shift + if [ "$A1PMS_VERSION" == "V2" ]; then + noti=$1 + shift + else + noti="" + fi + template=$1 + shift + count=$1 + shift + pids=$1 + shift + + #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then + if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then + echo " Info - a1pms_api_put_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported" + echo " Info - will execute over a1pms REST" + fi + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $serv == "NOSERVICE" ]; then + serv="" + fi + query="$A1PMS_API_PREFIX/v2/policies" + else + if [ $serv == "NOSERVICE" ]; then + serv="" + fi + query="/policy?service=$serv" + + if [ $type != "NOTYPE" ]; then + query=$query"&type=$type" + fi + + if [ $transient != NOTRANSIENT ]; then + query=$query"&transient=$transient" + fi + fi + + urlbase=${A1PMS_ADAPTER}${query} + + httpproxy="NOPROXY" + if [ ! -z "$KUBE_PROXY_PATH" ]; then + httpproxy=$KUBE_PROXY_PATH + fi + + for ((i = 1; i <= $pids; i++)); do + uuid=$UUID + if [ -z "$uuid" ]; then + uuid="NOUUID" + fi + echo "" >"./tmp/.pid${i}.res.txt" + if [ "$A1PMS_VERSION" == "V2" ]; then + echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i $httpproxy >"./tmp/.pid${i}.txt" + else + echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $template $count $pids $i $httpproxy >"./tmp/.pid${i}.txt" + fi + echo $i + done | xargs -n 1 -I{} -P $pids bash -c '{ arg=$(echo {}) echo " Parallel process $arg started" tmp=$(< "./tmp/.pid${arg}.txt") python3 ../common/create_policies_process.py $tmp > ./tmp/.pid${arg}.res.txt }' - msg="" - for ((i=1; i<=$pids; i++)) - do - file="./tmp/.pid${i}.res.txt" - tmp=$(< $file) - if [ -z "$tmp" ]; then - echo " Process $i : unknown result (result file empty" - msg="failed" - else - res=${tmp:0:1} - if [ $res == "0" ]; then - echo " Process $i : OK - "${tmp:1} - else - echo " Process $i : failed - "${tmp:1} - msg="failed" - fi - fi - done - if [ -z $msg ]; then - __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $resp_code $(($count*$num_rics)) - __log_test_pass " $(($count*$num_rics)) policy request(s) executed" - return 0 - fi - - __log_test_fail_general "One of more processes failed to execute" - return 1 + msg="" + for ((i = 1; i <= $pids; i++)); do + file="./tmp/.pid${i}.res.txt" + tmp=$(<$file) + if [ -z "$tmp" ]; then + echo " Process $i : unknown result (result file empty" + msg="failed" + else + res=${tmp:0:1} + if [ $res == "0" ]; then + echo " Process $i : OK - "${tmp:1} + else + echo " Process $i : failed - "${tmp:1} + msg="failed" + fi + fi + done + if [ -z $msg ]; then + __collect_endpoint_stats "A1PMS" 02 "PUT" $A1PMS_API_PREFIX"/v2/policies" $resp_code $(($count * $num_rics)) + __log_test_pass " $(($count * $num_rics)) policy request(s) executed" + return 0 + fi + __log_test_fail_general "One of more processes failed to execute" + return 1 +} + +# API Test function: V3 POST /policies, to run in i parallel for a number of rics +# args: +# args(V3): |NOURL +# (Function for test scripts) +a1pms_api_post_policy_parallel() { + __log_test_start $@ + + if [ $# -ne 11 ]; then + __print_err "These all arguments needed |NOURL " $@ + return 1 + fi + + resp_code=$1 + shift + serv=$1 + shift + ric_base=$1 + shift + num_rics=$1 + shift + type=$1 + shift + start_id=$1 + shift + transient=$1 + shift + noti=$1 + shift + template=$1 + shift + count=$1 + shift + pids=$1 + shift + + #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then + if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then + echo " Info - a1pms_api_put_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported" + echo " Info - will execute over a1pms REST" + fi + + if [ $serv == "NOSERVICE" ]; then + serv="" + fi + query="$A1PMS_API_PREFIX/v1/policies" + + urlbase=${A1PMS_ADAPTER}${query} + + httpproxy="NOPROXY" + if [ ! -z "$KUBE_PROXY_PATH" ]; then + httpproxy=$KUBE_PROXY_PATH + fi + + for ((i = 1; i <= $pids; i++)); do + uuid=$UUID + if [ -z "$uuid" ]; then + uuid="NOUUID" + fi + echo "" >"./tmp/.pid${i}.res.txt" + echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i $httpproxy >"./tmp/.pid${i}.txt" + echo $i + done | xargs -n 1 -I{} -P $pids bash -c '{ + arg=$(echo {}) + echo " Parallel process $arg started" + tmp=$(< "./tmp/.pid${arg}.txt") + python3 ../common/create_policies_process.py $tmp > ./tmp/.pid${arg}.res.txt + }' + msg="" + for ((i = 1; i <= $pids; i++)); do + file="./tmp/.pid${i}.res.txt" + tmp=$(<$file) + if [ -z "$tmp" ]; then + echo " Process $i : unknown result (result file empty" + msg="failed" + else + res=${tmp:0:1} + if [ $res == "0" ]; then + echo " Process $i : OK - "${tmp:1} + else + echo " Process $i : failed - "${tmp:1} + msg="failed" + fi + fi + done + if [ -z $msg ]; then + __collect_endpoint_stats "A1PMS" 02 "POST" $A1PMS_API_PREFIX"/v1/policies" $resp_code $(($count * $num_rics)) + __log_test_pass " $(($count * $num_rics)) policy request(s) executed" + return 0 + fi + __log_test_fail_general "One of more processes failed to execute" + return 1 +} + +# API Test function: V3 PUT /policies, to run in i parallel for a number of rics +# args: +# args(V3): |NOURL +# (Function for test scripts) +a1pms_api_update_policy_parallel() { + __log_test_start $@ + + if [ $# -ne 12 ]; then + __print_err "These all arguments needed |NOURL " $@ + return 1 + fi + + resp_code=$1 + shift + serv=$1 + shift + ric_base=$1 + shift + num_rics=$1 + shift + type=$1 + shift + start_id=$1 + shift + transient=$1 + shift + noti=$1 + shift + template=$1 + shift + count=$1 + shift + pids=$1 + shift + policy_ids_file_path=$1 + shift + + #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then + if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then + echo " Info - a1pms_api_put_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported" + echo " Info - will execute over a1pms REST" + fi + + if [ $serv == "NOSERVICE" ]; then + serv="" + fi + query="$A1PMS_API_PREFIX/v1/policies" + + urlbase=${A1PMS_ADAPTER}${query} + + httpproxy="NOPROXY" + if [ ! -z "$KUBE_PROXY_PATH" ]; then + httpproxy=$KUBE_PROXY_PATH + fi + + for ((i = 1; i <= $pids; i++)); do + uuid=$UUID + if [ -z "$uuid" ]; then + uuid="NOUUID" + fi + echo "" >"./tmp/.pid${i}.res.txt" + echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i $httpproxy $policy_ids_file_path >"./tmp/.pid${i}.txt" + echo $i + done | xargs -n 1 -I{} -P $pids bash -c '{ + arg=$(echo {}) + echo " Parallel process $arg started" + tmp=$(< "./tmp/.pid${arg}.txt") + python3 ../common/update_policies_process.py $tmp > ./tmp/.pid${arg}.res.txt + }' + msg="" + for ((i = 1; i <= $pids; i++)); do + file="./tmp/.pid${i}.res.txt" + tmp=$(<$file) + if [ -z "$tmp" ]; then + echo " Process $i : unknown result (result file empty" + msg="failed" + else + res=${tmp:0:1} + if [ $res == "0" ]; then + echo " Process $i : OK - "${tmp:1} + else + echo " Process $i : failed - "${tmp:1} + msg="failed" + fi + fi + done + if [ -z $msg ]; then + __collect_endpoint_stats "A1PMS" 02 "POST" $A1PMS_API_PREFIX"/v1/policies" $resp_code $(($count * $num_rics)) + __log_test_pass " $(($count * $num_rics)) policy request(s) executed" + return 0 + fi + __log_test_fail_general "One of more processes failed to execute" + return 1 } -# API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id} +# API Test function: DELETE /policy, V2 DELETE /v2/policies/{policy_id} and V3 DELETE a1policymanagement/v1/policies/{policy_id} # args: [count] # (Function for test scripts) a1pms_api_delete_policy() { - __log_test_start $@ + __log_test_start $@ - if [ $# -lt 2 ] || [ $# -gt 3 ]; then - __print_err " [count]" $@ - return 1 + if [ $# -lt 2 ] || [ $# -gt 3 ]; then + __print_err " [count]" $@ + return 1 + fi + + count=0 + max=1 + + if [ $# -eq 3 ]; then + max=$3 + fi + + pid=$2 + + while [ $count -lt $max ]; do + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/policies/"$UUID$pid + elif [ "$A1PMS_VERSION" == "V3" ]; then + query="/v1/policies/"$UUID$pid + else + query="/policy?id="$UUID$pid + fi + res="$(__do_curl_to_api A1PMS DELETE $query)" + status=${res:${#res}-3} + echo -ne " Executing "${count}"("${max}")${SAMELINE}" + + if [ $status -ne $1 ]; then + echo " Executed "${count}"?("${max}")" + __log_test_fail_status_code $1 $status + return 1 fi - count=0 - max=1 - - if [ $# -eq 3 ]; then - max=$3 - fi - - pid=$2 - - while [ $count -lt $max ]; do - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/policies/"$UUID$pid - else - query="/policy?id="$UUID$pid - fi - res="$(__do_curl_to_api A1PMS DELETE $query)" - status=${res:${#res}-3} - echo -ne " Executing "$count"("$max")${SAMELINE}" - - if [ $status -ne $1 ]; then - echo " Executed "$count"?("$max")" - __log_test_fail_status_code $1 $status - return 1 - fi - - let pid=$pid+1 - let count=$count+1 - echo -ne " Executed "$count"("$max")${SAMELINE}" - done - __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $status $max - echo "" - - __log_test_pass - return 0 + let pid=$pid+1 + let count=$count+1 + echo -ne " Executed "${count}"("${max}")${SAMELINE}" + done + __collect_endpoint_stats "A1PMS" 03 "DELETE" ${A1PMS_API_PREFIX}${query} ${status} ${max} + echo "" + + __log_test_pass + return 0 } # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in batch # args: [count] # (Function for test scripts) a1pms_api_delete_policy_batch() { - __log_test_start $@ + __log_test_start $@ + + if [ $# -lt 2 ] || [ $# -gt 3 ]; then + __print_err " [count]" $@ + return 1 + fi + + count=0 + max=1 + + if [ $# -eq 3 ]; then + max=$3 + fi + + pid=$2 + ARR="" + while [ $count -lt $max ]; do + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/policies/"$UUID$pid + else + query="/policy?id="$UUID$pid + fi + res="$(__do_curl_to_api A1PMS DELETE_BATCH $query)" + status=${res:${#res}-3} + echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}" - if [ $# -lt 2 ] || [ $# -gt 3 ]; then - __print_err " [count]" $@ - return 1 + if [ $status -ne 200 ]; then + echo " Requested(batch) "$count"?("$max")" + __log_test_fail_status_code 200 $status + return 1 + fi + cid=${res:0:${#res}-3} + ARR=$ARR" "$cid + let pid=$pid+1 + let count=$count+1 + echo -ne " Requested(batch) "$count"("$max")${SAMELINE}" + done + + echo "" + + count=0 + for cid in $ARR; do + + res="$(__do_curl_to_api A1PMS RESPONSE $cid)" + status=${res:${#res}-3} + echo -ne " Deleting(batch) "$count"("$max")${SAMELINE}" + + if [ $status -ne $1 ]; then + echo " Deleted(batch) "$count"?("$max")" + __log_test_fail_status_code $1 $status + return 1 fi - count=0 - max=1 - - if [ $# -eq 3 ]; then - max=$3 - fi - - pid=$2 - ARR="" - while [ $count -lt $max ]; do - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/policies/"$UUID$pid - else - query="/policy?id="$UUID$pid - fi - res="$(__do_curl_to_api A1PMS DELETE_BATCH $query)" - status=${res:${#res}-3} - echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}" - - if [ $status -ne 200 ]; then - echo " Requested(batch) "$count"?("$max")" - __log_test_fail_status_code 200 $status - return 1 - fi - cid=${res:0:${#res}-3} - ARR=$ARR" "$cid - let pid=$pid+1 - let count=$count+1 - echo -ne " Requested(batch) "$count"("$max")${SAMELINE}" - done - - echo "" - - count=0 - for cid in $ARR; do - - res="$(__do_curl_to_api A1PMS RESPONSE $cid)" - status=${res:${#res}-3} - echo -ne " Deleting(batch) "$count"("$max")${SAMELINE}" - - if [ $status -ne $1 ]; then - echo " Deleted(batch) "$count"?("$max")" - __log_test_fail_status_code $1 $status - return 1 - fi - - let count=$count+1 - echo -ne " Deleted(batch) "$count"("$max")${SAMELINE}" - done - __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $1 $max - - echo "" - - __log_test_pass - return 0 + let count=$count+1 + echo -ne " Deleted(batch) "$count"("$max")${SAMELINE}" + done + __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $1 $max + + echo "" + + __log_test_pass + return 0 } # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in i parallel for a number of rics # args: # (Function for test scripts) a1pms_api_delete_policy_parallel() { - __log_test_start $@ - - if [ $# -ne 5 ]; then - __print_err " " $@ - return 1 + __log_test_start $@ + + if [ $# -ne 5 ]; then + __print_err " " $@ + return 1 + fi + resp_code=$1 + shift + num_rics=$1 + shift + start_id=$1 + shift + count=$1 + shift + pids=$1 + shift + + #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then + if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then + echo " Info - a1pms_api_delete_policy_parallel uses only the a1pms REST interface - delete over dmaap in parallel is not supported" + echo " Info - will execute over a1pms REST" + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + query="$A1PMS_API_PREFIX/v2/policies/" + else + query="/policy" + fi + + urlbase=${A1PMS_ADAPTER}${query} + + httpproxy="NOPROXY" + if [ ! -z "$KUBE_PROXY_PATH" ]; then + httpproxy=$KUBE_PROXY_PATH + fi + + for ((i = 1; i <= $pids; i++)); do + uuid=$UUID + if [ -z "$uuid" ]; then + uuid="NOUUID" fi - resp_code=$1; shift; - num_rics=$1; shift; - start_id=$1; shift; - count=$1; shift; - pids=$1; shift; - - #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then - if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then - echo " Info - a1pms_api_delete_policy_parallel uses only the a1pms REST interface - create over dmaap in parallel is not supported" - echo " Info - will execute over a1pms REST" - fi - - if [ "$A1PMS_VERSION" == "V2" ]; then - query="$A1PMS_API_PREFIX/v2/policies/" - else - query="/policy" - fi - - urlbase=${A1PMS_ADAPTER}${query} - - httpproxy="NOPROXY" - if [ ! -z "$KUBE_PROXY_PATH" ]; then - httpproxy=$KUBE_PROXY_PATH - fi - - for ((i=1; i<=$pids; i++)) - do - uuid=$UUID - if [ -z "$uuid" ]; then - uuid="NOUUID" - fi - echo "" > "./tmp/.pid${i}.del.res.txt" - echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i $httpproxy> "./tmp/.pid${i}.del.txt" - echo $i - done | xargs -n 1 -I{} -P $pids bash -c '{ + echo "" >"./tmp/.pid${i}.del.res.txt" + echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i $httpproxy >"./tmp/.pid${i}.del.txt" + echo $i + done | xargs -n 1 -I{} -P $pids bash -c '{ arg=$(echo {}) echo " Parallel process $arg started" tmp=$(< "./tmp/.pid${arg}.del.txt") python3 ../common/delete_policies_process.py $tmp > ./tmp/.pid${arg}.del.res.txt }' - msg="" - for ((i=1; i<=$pids; i++)) - do - file="./tmp/.pid${i}.del.res.txt" - tmp=$(< $file) - if [ -z "$tmp" ]; then - echo " Process $i : unknown result (result file empty" - msg="failed" - else - res=${tmp:0:1} - if [ $res == "0" ]; then - echo " Process $i : OK - "${tmp:1} - else - echo " Process $i : failed - "${tmp:1} - msg="failed" - fi - fi - done - if [ -z $msg ]; then - __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $resp_code $(($count*$num_rics)) - __log_test_pass " $(($count*$num_rics)) policy request(s) executed" - return 0 - fi - - __log_test_fail_general "One of more processes failed to execute" - return 1 + msg="" + for ((i = 1; i <= $pids; i++)); do + file="./tmp/.pid${i}.del.res.txt" + tmp=$(<$file) + if [ -z "$tmp" ]; then + echo " Process $i : unknown result (result file empty" + msg="failed" + else + res=${tmp:0:1} + if [ $res == "0" ]; then + echo " Process $i : OK - "${tmp:1} + else + echo " Process $i : failed - "${tmp:1} + msg="failed" + fi + fi + done + if [ -z $msg ]; then + __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $resp_code $(($count * $num_rics)) + __log_test_pass " $(($count * $num_rics)) policy request(s) executed" + return 0 + fi + + __log_test_fail_general "One of more processes failed to execute" + return 1 +} + +# API Test function: V3 DELETE a1policymanagement/v1/policies/{policy_id}, to run in i parallel for a number of rics +# args: +# (Function for test scripts) +a1pms_api_delete_policy_parallel_v3() { + __log_test_start $@ + + if [ $# -ne 6 ]; then + __print_err " " $@ + return 1 + fi + resp_code=$1 + shift + num_rics=$1 + shift + policy_ids_file_path=$1 + shift + start_id=$1 + shift + count=$1 + shift + pids=$1 + shift + + #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then + if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then + echo " Info - a1pms_api_delete_policy_parallel uses only the a1pms REST interface - delete over dmaap in parallel is not supported" + echo " Info - will execute over a1pms REST" + fi + + query="$A1PMS_API_PREFIX/v1/policies/" + urlbase=${A1PMS_ADAPTER}${query} + + urlbase=${A1PMS_ADAPTER}${query} + + httpproxy="NOPROXY" + if [ ! -z "$KUBE_PROXY_PATH" ]; then + httpproxy=$KUBE_PROXY_PATH + fi + + for ((i = 1; i <= $pids; i++)); do + echo "" >"./tmp/.pid${i}.del.res.txt" + echo $resp_code $urlbase $policy_ids_file_path $start_id $pids $i $httpproxy >"./tmp/.pid${i}.del.txt" + echo $i + done | xargs -n 1 -I{} -P $pids bash -c '{ + arg=$(echo {}) + echo " Parallel process $arg started" + tmp=$(< "./tmp/.pid${arg}.del.txt") + python3 ../common/delete_policies_process_v3.py $tmp > ./tmp/.pid${arg}.del.res.txt + }' + msg="" + for ((i = 1; i <= $pids; i++)); do + file="./tmp/.pid${i}.del.res.txt" + tmp=$(<$file) + if [ -z "$tmp" ]; then + echo " Process $i : unknown result (result file empty" + msg="failed" + else + res=${tmp:0:1} + if [ $res == "0" ]; then + echo " Process $i : OK - "${tmp:1} + else + echo " Process $i : failed - "${tmp:1} + msg="failed" + fi + fi + done + if [ -z $msg ]; then + __collect_endpoint_stats "A1PMS" 03 "DELETE" $A1PMS_API_PREFIX"/v1/policies/{policy_id}" $resp_code $(($count * $num_rics)) + __log_test_pass " $(($count * $num_rics)) policy request(s) executed" + return 0 + fi + + __log_test_fail_general "One of more processes failed to execute" + return 1 +} + +# API Test function: GET /policy and V2 GET /v2/policies/{policy_id}, to run in i parallel for a number of rics +# args: +# (Function for test scripts) +a1pms_api_get_policy_parallel() { + __log_test_start $@ + + if [ $# -ne 5 ]; then + __print_err " " $@ + return 1 + fi + resp_code=$1 + shift + num_rics=$1 + shift + start_id=$1 + shift + count=$1 + shift + pids=$1 + shift + + #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then + if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then + echo " Info - a1pms_api_get_policy_parallel uses only the a1pms REST interface - GET over dmaap in parallel is not supported" + echo " Info - will execute over a1pms REST" + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + query="$A1PMS_API_PREFIX/v2/policies/" + else + query="/policy" + fi + + urlbase=${A1PMS_ADAPTER}${query} + + httpproxy="NOPROXY" + if [ ! -z "$KUBE_PROXY_PATH" ]; then + httpproxy=$KUBE_PROXY_PATH + fi + + for ((i = 1; i <= $pids; i++)); do + uuid=$UUID + if [ -z "$uuid" ]; then + uuid="NOUUID" + fi + echo "" >"./tmp/.pid${i}.get.res.txt" + echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i $httpproxy >"./tmp/.pid${i}.get.txt" + echo $i + done | xargs -n 1 -I{} -P $pids bash -c '{ + arg=$(echo {}) + echo " Parallel process $arg started" + tmp=$(< "./tmp/.pid${arg}.get.txt") + python3 ../common/get_policies_process.py $tmp > ./tmp/.pid${arg}.get.res.txt + }' + msg="" + for ((i = 1; i <= $pids; i++)); do + file="./tmp/.pid${i}.get.res.txt" + tmp=$(<$file) + if [ -z "$tmp" ]; then + echo " Process $i : unknown result (result file empty" + msg="failed" + else + res=${tmp:0:1} + if [ $res == "0" ]; then + echo " Process $i : OK - "${tmp:1} + else + echo " Process $i : failed - "${tmp:1} + msg="failed" + fi + fi + done + if [ -z $msg ]; then + __collect_endpoint_stats "A1PMS" 04 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}" $resp_code $(($count * $num_rics)) + __log_test_pass " $(($count * $num_rics)) policy request(s) executed" + return 0 + fi + + __log_test_fail_general "One of more processes failed to execute" + return 1 +} + +# API Test function: V3 GET a1policymanagement/v1/policies/{policy_id}, to run in i parallel for a number of rics +# args: +# (Function for test scripts) +a1pms_api_get_policy_parallel_v3() { + __log_test_start $@ + + if [ $# -ne 6 ]; then + __print_err " " $@ + return 1 + fi + resp_code=$1 + shift + num_rics=$1 + shift + policy_ids_file_path=$1 + shift + start_id=$1 + shift + count=$1 + shift + pids=$1 + shift + + #if [ $A1PMS_ADAPTER != $RESTBASE ] && [ $A1PMS_ADAPTER != $RESTBASE_SECURE ]; then + if [ $A1PMS_ADAPTER_TYPE != "REST" ]; then + echo " Info - a1pms_api_get_policy_parallel uses only the a1pms REST interface - GET over dmaap in parallel is not supported" + echo " Info - will execute over a1pms REST" + fi + + query="$A1PMS_API_PREFIX/v1/policies/" + urlbase=${A1PMS_ADAPTER}${query} + + httpproxy="NOPROXY" + if [ ! -z "$KUBE_PROXY_PATH" ]; then + httpproxy=$KUBE_PROXY_PATH + fi + + for ((i = 1; i <= $pids; i++)); do + echo "" >"./tmp/.pid${i}.get.res.txt" + echo $resp_code $urlbase $policy_ids_file_path $start_id $pids $i $httpproxy >"./tmp/.pid${i}.get.txt" + echo $i + done | xargs -n 1 -I{} -P $pids bash -c '{ + arg=$(echo {}) + echo " Parallel process $arg started" + tmp=$(< "./tmp/.pid${arg}.get.txt") + python3 ../common/get_policies_process_v3.py $tmp > ./tmp/.pid${arg}.get.res.txt + }' + msg="" + for ((i = 1; i <= $pids; i++)); do + file="./tmp/.pid${i}.get.res.txt" + tmp=$(<$file) + if [ -z "$tmp" ]; then + echo " Process $i : unknown result (result file empty" + msg="failed" + else + res=${tmp:0:1} + if [ $res == "0" ]; then + echo " Process $i : OK - "${tmp:1} + else + echo " Process $i : failed - "${tmp:1} + msg="failed" + fi + fi + done + if [ -z $msg ]; then + __collect_endpoint_stats "A1PMS" 04 "GET" $A1PMS_API_PREFIX"/v1/policies/{policyId}" $resp_code $(($count * $num_rics)) + __log_test_pass " $(($count * $num_rics)) policy request(s) executed" + return 0 + fi + + __log_test_fail_general "One of more processes failed to execute" + return 1 } # API Test function: GET /policy_ids and V2 GET /v2/policies # args: |NORIC |NOSERVICE |NOTYPE ([ |NORIC |NOSERVICE |NOTYPE ([ |NORIC |NOSERVICE |NOTYPE ([> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - - __collect_endpoint_stats "A1PMS" 04 "GET" $A1PMS_API_PREFIX"/v2/policies" $status - __log_test_pass - return 0 -} + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $2 != "NORIC" ]; then + queryparams="?ric_id="$2 + fi -# API Test function: V2 GET /v2/policy-types/{policyTypeId} -# args(V2): [] -# (Function for test scripts) -a1pms_api_get_policy_type() { - __log_test_start $@ + if [ $3 != "NOSERVICE" ]; then + if [ -z $queryparams ]; then + queryparams="?service_id="$3 + else + queryparams=$queryparams"&service_id="$3 + fi + fi + if [ $4 != "NOTYPE" ]; then + if [ -z $queryparams ]; then + queryparams="?policytype_id="$4 + else + queryparams=$queryparams"&policytype_id="$4 + fi + fi - if [ "$A1PMS_VERSION" != "V2" ]; then - __log_test_fail_not_supported - return 1 - fi + query="/v2/policies"$queryparams + else + if [ $2 != "NORIC" ]; then + queryparams="?ric="$2 + fi - if [ $# -lt 2 ] || [ $# -gt 3 ]; then - __print_err " []" $@ - return 1 + if [ $3 != "NOSERVICE" ]; then + if [ -z $queryparams ]; then + queryparams="?service="$3 + else + queryparams=$queryparams"&service="$3 + fi + fi + if [ $4 != "NOTYPE" ]; then + if [ -z $queryparams ]; then + queryparams="?type="$4 + else + queryparams=$queryparams"&type="$4 + fi + fi + + query="/policy_ids"$queryparams + fi + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 4 ]; then + body=${res:0:${#res}-3} + targetJson="[" + + for pid in ${@:5}; do + if [ "$targetJson" != "[" ]; then + targetJson=$targetJson"," + fi + if [ $pid != "NOID" ]; then + targetJson=$targetJson"\"$UUID$pid\"" + fi + done + + targetJson=$targetJson"]" + if [ "$A1PMS_VERSION" == "V2" ]; then + targetJson="{\"policy_ids\": $targetJson}" + fi + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 fi - query="/v2/policy-types/$2" + fi + + __collect_endpoint_stats "A1PMS" 04 "GET" $A1PMS_API_PREFIX"/v2/policies" $status + __log_test_pass + return 0 +} + +# API Test function: V3 GET a1policymanagement/v1/policies +# args: |NORIC |NOSERVICE |NOTYPE ([ |NORIC |NOSERVICE |NOTYPE ([>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi - targetJson=$(< $3) - targetJson="{\"policy_schema\":$targetJson}" - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") + __collect_endpoint_stats "A1PMS" 04 "GET" ${A1PMS_API_PREFIX}${query} ${status} + __log_test_pass + return 0 +} - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi +# API Test function: V2 GET a1-policy/v2/policy-types/{policyTypeId} and V3 GET a1policymanagement/v1/policytypes/{policyTypeId} +# args(V2): [] +# (Function for test scripts) +a1pms_api_get_policy_type() { + __log_test_start $@ + + if [ "$A1PMS_VERSION" != "V2" ] && [ "$A1PMS_VERSION" != "V3" ]; then + __log_test_fail_not_supported + return 1 + fi + + if [ $# -lt 2 ] || [ $# -gt 3 ]; then + __print_err " []" $@ + return 1 + fi + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/policy-types/$2" + fi + if [ "$A1PMS_VERSION" == "V3" ]; then + query="/v1/policytypes/$2" + fi + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -eq 3 ]; then + + body=${res:0:${#res}-3} + + targetJson=$(<$3) + if [ "$A1PMS_VERSION" == "V2" ]; then + targetJson="{\"policy_schema\":$targetJson}" + elif [ "$A1PMS_VERSION" == "V3" ]; then + targetJson="$targetJson" + fi + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") - __collect_endpoint_stats "A1PMS" 05 "GET" $A1PMS_API_PREFIX"/v2/policy-types/{policyTypeId}" $status - __log_test_pass - return 0 + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + + __collect_endpoint_stats "A1PMS" 05 "GET" ${A1PMS_API_PREFIX}${query} ${status} + __log_test_pass + return 0 } # API Test function: GET /policy_schema # args: [] # (Function for test scripts) a1pms_api_get_policy_schema() { - __log_test_start $@ + __log_test_start $@ - if [ "$A1PMS_VERSION" == "V2" ]; then - __log_test_fail_not_supported - return 1 - fi + if [ "$A1PMS_VERSION" == "V2" ]; then + __log_test_fail_not_supported + return 1 + fi - if [ $# -lt 2 ] || [ $# -gt 3 ]; then - __print_err " []" $@ - return 1 - fi - query="/policy_schema?id=$2" - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} + if [ $# -lt 2 ] || [ $# -gt 3 ]; then + __print_err " []" $@ + return 1 + fi + query="/policy_schema?id=$2" + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi - if [ $# -eq 3 ]; then + if [ $# -eq 3 ]; then - body=${res:0:${#res}-3} + body=${res:0:${#res}-3} - targetJson=$(< $3) + targetJson=$(<$3) - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi - __collect_endpoint_stats "A1PMS" 06 "GET" $A1PMS_API_PREFIX"/v2/policy_schema" $status - __log_test_pass - return 0 + __collect_endpoint_stats "A1PMS" 06 "GET" $A1PMS_API_PREFIX"/v2/policy_schema" $status + __log_test_pass + return 0 } # API Test function: GET /policy_schemas @@ -1660,743 +2293,906 @@ a1pms_api_get_policy_schema() { # args(V2): # (Function for test scripts) a1pms_api_get_policy_schemas() { - __log_test_start $@ - - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $# -ne 1 ]; then - __print_err "" $@ - return 1 - fi - else - if [ $# -lt 2 ]; then - __print_err " |NORIC [|NOFILE]*" $@ - return 1 - fi - fi - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/policy-schemas" - else - query="/policy_schemas" - if [ $2 != "NORIC" ]; then - query=$query"?ric="$2 - fi - fi - - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -gt 2 ]; then - body=${res:0:${#res}-3} - targetJson="[" - - for file in ${@:3} ; do - if [ "$targetJson" != "[" ]; then - targetJson=$targetJson"," - fi - if [ $file == "NOFILE" ]; then - targetJson=$targetJson"{}" - else - targetJson=$targetJson$(< $file) - fi - done - - targetJson=$targetJson"]" - if [ "$A1PMS_VERSION" == "V2" ]; then - targetJson="{\"policy_schemas\": $targetJson }" - fi - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - - __collect_endpoint_stats "A1PMS" 07 "GET" $A1PMS_API_PREFIX"/v2/policy-schemas" $status - __log_test_pass - return 0 + __log_test_start $@ + + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $# -ne 1 ]; then + __print_err "" $@ + return 1 + fi + else + if [ $# -lt 2 ]; then + __print_err " |NORIC [|NOFILE]*" $@ + return 1 + fi + fi + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/policy-schemas" + else + query="/policy_schemas" + if [ $2 != "NORIC" ]; then + query=$query"?ric="$2 + fi + fi + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 2 ]; then + body=${res:0:${#res}-3} + targetJson="[" + + for file in ${@:3}; do + if [ "$targetJson" != "[" ]; then + targetJson=$targetJson"," + fi + if [ $file == "NOFILE" ]; then + targetJson=$targetJson"{}" + else + targetJson=$targetJson$(<$file) + fi + done + + targetJson=$targetJson"]" + if [ "$A1PMS_VERSION" == "V2" ]; then + targetJson="{\"policy_schemas\": $targetJson }" + fi + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + + __collect_endpoint_stats "A1PMS" 07 "GET" $A1PMS_API_PREFIX"/v2/policy-schemas" $status + __log_test_pass + return 0 } # API Test function: GET /policy_status and V2 GET /policies/{policy_id}/status # arg: [ (STD|STD2 |EMPTY [|EMPTY])|(OSC ) ] # (Function for test scripts) a1pms_api_get_policy_status() { - __log_test_start $@ - - if [ $# -lt 2 ] || [ $# -gt 5 ]; then - __print_err " [(STD |EMPTY [|EMPTY])|(OSC )]" $@ - return 1 - fi - - targetJson="" - if [ $# -eq 2 ]; then - : - elif [ "$3" == "STD" ]; then - targetJson="{\"enforceStatus\":\"$4\"" - if [ $# -eq 5 ]; then - targetJson=$targetJson",\"reason\":\"$5\"" - fi - targetJson=$targetJson"}" - elif [ "$3" == "STD2" ]; then - if [ $4 == "EMPTY" ]; then - targetJson="{\"enforceStatus\":\"\"" - else - targetJson="{\"enforceStatus\":\"$4\"" - fi - if [ $# -eq 5 ]; then - if [ $5 == "EMPTY" ]; then - targetJson=$targetJson",\"enforceReason\":\"\"" - else - targetJson=$targetJson",\"enforceReason\":\"$5\"" - fi - fi - targetJson=$targetJson"}" - elif [ "$3" == "OSC" ]; then - targetJson="{\"instance_status\":\"$4\"" - if [ $# -eq 5 ]; then - targetJson=$targetJson",\"has_been_deleted\":\"$5\"" - fi - targetJson=$targetJson",\"created_at\":\"????\"}" - else - __print_err " (STD [])|(OSC )" $@ - return 1 - fi - - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/policies/$UUID$2/status" - targetJson="{\"last_modified\":\"????\",\"status\":$targetJson}" - else - query="/policy_status?id="$UUID$2 - fi - - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - if [ $# -gt 2 ]; then - echo "TARGET JSON: $targetJson" >> $HTTPLOG - body=${res:0:${#res}-3} - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - __collect_endpoint_stats "A1PMS" 08 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}/status" $status - __log_test_pass - return 0 + __log_test_start $@ + + if [ $# -lt 2 ] || [ $# -gt 5 ]; then + __print_err " [(STD |EMPTY [|EMPTY])|(OSC )]" $@ + return 1 + fi + + targetJson="" + if [ $# -eq 2 ]; then + : + elif [ "$3" == "STD" ]; then + targetJson="{\"enforceStatus\":\"$4\"" + if [ $# -eq 5 ]; then + targetJson=$targetJson",\"reason\":\"$5\"" + fi + targetJson=$targetJson"}" + elif [ "$3" == "STD2" ]; then + if [ $4 == "EMPTY" ]; then + targetJson="{\"enforceStatus\":\"\"" + else + targetJson="{\"enforceStatus\":\"$4\"" + fi + if [ $# -eq 5 ]; then + if [ $5 == "EMPTY" ]; then + targetJson=$targetJson",\"enforceReason\":\"\"" + else + targetJson=$targetJson",\"enforceReason\":\"$5\"" + fi + fi + targetJson=$targetJson"}" + elif [ "$3" == "OSC" ]; then + if [[ $TEST_ENV_PROFILE =~ ^ORAN-[A-H] ]] || [[ $TEST_ENV_PROFILE =~ ^ONAP-[A-L] ]]; then + targetJson="{\"instance_status\":\"$4\"" + if [ $# -eq 5 ]; then + targetJson=$targetJson",\"has_been_deleted\":\"$5\"" + fi + targetJson=$targetJson",\"created_at\":\"????\"}" + else + targetJson="{\"enforceStatus\":\"$4\"" + if [ $# -eq 5 ]; then + targetJson=$targetJson",\"enforceReason\":\"$5\"}" + fi + fi + else + __print_err " (STD [])|(OSC )" $@ + return 1 + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/policies/$UUID$2/status" + targetJson="{\"last_modified\":\"????\",\"status\":$targetJson}" + else + query="/policy_status?id="$UUID$2 + fi + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + if [ $# -gt 2 ]; then + echo "TARGET JSON: $targetJson" >>$HTTPLOG + body=${res:0:${#res}-3} + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + __collect_endpoint_stats "A1PMS" 08 "GET" $A1PMS_API_PREFIX"/v2/policies/{policy_id}/status" $status + __log_test_pass + return 0 } # API Test function: GET /policy_types and V2 GET /v2/policy-types # args: [|NORIC [|EMPTY []*]] # (Function for test scripts) a1pms_api_get_policy_types() { - __log_test_start $@ - - if [ $# -lt 1 ]; then - __print_err " [|NORIC [|EMPTY []*]]" $@ - return 1 - fi - - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $# -eq 1 ]; then - query="/v2/policy-types" - elif [ $2 == "NORIC" ]; then - query="/v2/policy-types" - else - query="/v2/policy-types?ric_id=$2" - fi - else - if [ $# -eq 1 ]; then - query="/policy_types" - elif [ $2 == "NORIC" ]; then - query="/policy_types" - else - query="/policy_types?ric=$2" - fi - fi + __log_test_start $@ + + if [ $# -lt 1 ]; then + __print_err " [|NORIC [|EMPTY []*]]" $@ + return 1 + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $# -eq 1 ]; then + query="/v2/policy-types" + elif [ $2 == "NORIC" ]; then + query="/v2/policy-types" + else + query="/v2/policy-types?ric_id=$2" + fi + else + if [ $# -eq 1 ]; then + query="/policy_types" + elif [ $2 == "NORIC" ]; then + query="/policy_types" + else + query="/policy_types?ric=$2" + fi + fi + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 2 ]; then + body=${res:0:${#res}-3} + targetJson="[" + + for pid in ${@:3}; do + if [ "$targetJson" != "[" ]; then + targetJson=$targetJson"," + fi + if [ $pid == "EMPTY" ]; then + pid="" + fi + targetJson=$targetJson"\"$pid\"" + done + + targetJson=$targetJson"]" + if [ "$A1PMS_VERSION" == "V2" ]; then + targetJson="{\"policytype_ids\": $targetJson }" + fi + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + + __collect_endpoint_stats "A1PMS" 09 "GET" $A1PMS_API_PREFIX"/v2/policy-types" $status + __log_test_pass + return 0 +} + +# API Test function: V3 GET a1policymanagement/v1/policytypes +# args: [|NORIC [|EMPTY []*]] +# (Function for test scripts) +a1pms_api_get_policy_types_v3() { + __log_test_start $@ + + if [ $# -lt 1 ]; then + __print_err " [|NORIC [|EMPTY []*]]" $@ + return 1 + fi + + if [ $# -eq 1 ]; then + query="/v1/policytypes" + elif [ $2 == "NORIC" ]; then + query="/v1/policytypes" + else + query="/v1/policytypes?nearRtRicId=$2" + fi + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 2 ]; then + body=${res:0:${#res}-3} + targetJson="[" + + for pid in ${@:3}; do + if [ "$targetJson" != "[" ]; then + targetJson=$targetJson"," + fi + IFS=':' read -r policy_type_id ric_id <<<"$pid" + # if [ -n "$policy_type_id" ] && [ -n "$ric_id" ]; then + if [ $policy_type_id == "EMPTY" ]; then + policy_type_id="" + fi + targetJson=$targetJson"{ \"policyTypeId\": \"$policy_type_id\", \"nearRtRicId\": \"$ric_id\" }" + # fi + done + + targetJson=$targetJson"]" + + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -gt 2 ]; then - body=${res:0:${#res}-3} - targetJson="[" - - for pid in ${@:3} ; do - if [ "$targetJson" != "[" ]; then - targetJson=$targetJson"," - fi - if [ $pid == "EMPTY" ]; then - pid="" - fi - targetJson=$targetJson"\"$pid\"" - done - - targetJson=$targetJson"]" - if [ "$A1PMS_VERSION" == "V2" ]; then - targetJson="{\"policytype_ids\": $targetJson }" - fi - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - - __collect_endpoint_stats "A1PMS" 09 "GET" $A1PMS_API_PREFIX"/v2/policy-types" $status - __log_test_pass - return 0 + __collect_endpoint_stats "A1PMS" 09 "GET" ${A1PMS_API_PREFIX}${query} ${status} + __log_test_pass + return 0 } ######################################################### #### Test case functions Health check ######################################################### -# API Test function: GET /status and V2 GET /status +# API Test function: GET /status and V2 GET /status or (v1/status for a1pmsV3) # args: # (Function for test scripts) a1pms_api_get_status() { - __log_test_start $@ - if [ $# -ne 1 ]; then - __print_err "" $@ - return 1 - fi - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/status" - else - query="/status" - fi - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - __collect_endpoint_stats "A1PMS" 10 "GET" $A1PMS_API_PREFIX"/v2/status" $status - __log_test_pass - return 0 + __log_test_start $@ + if [ $# -ne 1 ]; then + __print_err "" $@ + return 1 + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/status" + elif [ "$A1PMS_VERSION" == "V3" ]; then + query="/v1/status" + else + query="/status" + fi + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + __collect_endpoint_stats "A1PMS" 10 "GET" $A1PMS_API_PREFIX$query $status + __log_test_pass + return 0 } # API Test function: GET /status (root) without api prefix # args: # (Function for test scripts) a1pms_api_get_status_root() { - __log_test_start $@ - if [ $# -ne 1 ]; then - __print_err "" $@ - return 1 - fi - query="/status" - TMP_PREFIX=$A1PMS_API_PREFIX - A1PMS_API_PREFIX="" - res="$(__do_curl_to_api A1PMS GET $query)" - A1PMS_API_PREFIX=$TMP_PREFIX - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - __collect_endpoint_stats "A1PMS" 19 "GET" "/status" $status - __log_test_pass - return 0 + __log_test_start $@ + if [ $# -ne 1 ]; then + __print_err "" $@ + return 1 + fi + query="/status" + TMP_PREFIX=$A1PMS_API_PREFIX + A1PMS_API_PREFIX="" + res="$(__do_curl_to_api A1PMS GET $query)" + A1PMS_API_PREFIX=$TMP_PREFIX + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + __collect_endpoint_stats "A1PMS" 19 "GET" "/status" $status + __log_test_pass + return 0 } ######################################################### #### Test case functions RIC Repository ######################################################### -# API Test function: GET /ric and V2 GET /v2/rics/ric +# API Test function: GET /ric, V2 GET /v2/rics/ric, and V3 GET a1policymanagement/v1/rics/ric # args: [] # (V2) args: |NOME | [] # (V2) example of = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4" # (V2) format of ric-info: :: - # (Function for test scripts) a1pms_api_get_ric() { - __log_test_start $@ - - if [ "$A1PMS_VERSION" == "V2" ]; then - if [ $# -lt 3 ]; then - __print_err " |NOME | [string-of-ricinfo>]" $@ - return 1 - fi - search="" - if [ $2 != "NOME" ]; then - search="?managed_element_id="$2 - fi - if [ $3 != "NORIC" ]; then - if [ -z $search ]; then - search="?ric_id="$3 - else - search=$search"&ric_id="$3 - fi - fi - query="/v2/rics/ric"$search - - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -gt 3 ]; then - body=${res:0:${#res}-3} - res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$4" ) - if [ $res -ne 0 ]; then - __log_test_fail_general "Could not create target ric info json" - return 1 - fi - - targetJson=$(<./tmp/.tmp_rics.json) - targetJson=${targetJson:1:${#targetJson}-2} #remove array brackets - echo " TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - else - if [ $# -lt 2 ] || [ $# -gt 3 ]; then - __print_err " []" $@ - return 1 - fi - - query="/ric?managedElementId="$2 - - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -eq 3 ]; then - body=${res:0:${#res}-3} - if [ "$body" != "$3" ]; then - __log_test_fail_body - return 1 - fi - fi - fi - - __collect_endpoint_stats "A1PMS" 11 "GET" $A1PMS_API_PREFIX"/v2/rics/ric" $status - __log_test_pass - return 0 + __log_test_start $@ + + if [ "$A1PMS_VERSION" == "V2" ]; then + if [ $# -lt 3 ]; then + __print_err " |NOME | [string-of-ricinfo>]" $@ + return 1 + fi + search="" + if [ $2 != "NOME" ]; then + search="?managed_element_id="$2 + fi + if [ $3 != "NORIC" ]; then + if [ -z $search ]; then + search="?ric_id="$3 + else + search=$search"&ric_id="$3 + fi + fi + query="/v2/rics/ric"$search + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 3 ]; then + body=${res:0:${#res}-3} + res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$4") + if [ $res -ne 0 ]; then + __log_test_fail_general "Could not create target ric info json" + return 1 + fi + + targetJson=$(<./tmp/.tmp_rics.json) + targetJson=${targetJson:1:${#targetJson}-2} #remove array brackets + echo " TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + elif [ "$A1PMS_VERSION" == "V3" ]; then + if [ $# -lt 3 ]; then + __print_err " |NOME | [stringOfRicInfo>]" $@ + return 1 + fi + search="" + if [ $2 != "NOME" ]; then + search="?managedElementId="$2 + fi + if [ $3 != "NORIC" ]; then + if [ -z $search ]; then + search="?ricId="$3 + else + search=$search"&ricId="$3 + fi + fi + query="/v1/rics/ric"$search + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 3 ]; then + body=${res:0:${#res}-3} + res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "${A1PMS_VERSION}" "$4") + if [ $res -ne 0 ]; then + __log_test_fail_general "Could not create target ric info json" + return 1 + fi + + targetJson=$(<./tmp/.tmp_rics.json) + targetJson=${targetJson:1:${#targetJson}-2} #remove array brackets + echo " TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + else + if [ $# -lt 2 ] || [ $# -gt 3 ]; then + __print_err " []" $@ + return 1 + fi + + query="/ric?managedElementId="$2 + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -eq 3 ]; then + body=${res:0:${#res}-3} + if [ "$body" != "$3" ]; then + __log_test_fail_body + return 1 + fi + fi + fi + + __collect_endpoint_stats "A1PMS" 11 "GET" ${A1PMS_API_PREFIX}${query} ${status} + __log_test_pass + return 0 } -# API test function: GET /rics and V2 GET /v2/rics +# API test function: GET /rics, V2 GET /v2/rics, and V3 GET /a1policymanagement/v1/rics # args: |NOTYPE [] # example of = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........." # format of ric-info: :: # (Function for test scripts) a1pms_api_get_rics() { - __log_test_start $@ + __log_test_start $@ - if [ $# -lt 2 ]; then - __print_err " |NOTYPE []" $@ - return 1 - fi - - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/rics" - if [ $2 != "NOTYPE" ]; then - query="/v2/rics?policytype_id="$2 - fi - else - query="/rics" - if [ $2 != "NOTYPE" ]; then - query="/rics?policyType="$2 - fi - fi + if [ $# -lt 2 ]; then + __print_err " |NOTYPE []" $@ + return 1 + fi - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/rics" + if [ $2 != "NOTYPE" ]; then + query="/v2/rics?policytype_id="$2 + fi + elif [ "$A1PMS_VERSION" == "V3" ]; then + query="/v1/rics" + if [ $2 != "NOTYPE" ]; then + query=${query}"?policyTypeId="$2 + fi + else + query="/rics" + if [ $2 != "NOTYPE" ]; then + query="/rics?policyType="$2 + fi + fi + + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 2 ]; then + body=${res:0:${#res}-3} + res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "${A1PMS_VERSION}" "$3") + if [ $res -ne 0 ]; then + __log_test_fail_general "Could not create target ric info json" + return 1 + fi - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -gt 2 ]; then - body=${res:0:${#res}-3} - if [ "$A1PMS_VERSION" == "V2" ]; then - res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$3" ) - else - res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V1" "$3" ) - fi - if [ $res -ne 0 ]; then - __log_test_fail_general "Could not create target ric info json" - return 1 - fi - - targetJson=$(<./tmp/.tmp_rics.json) - if [ "$A1PMS_VERSION" == "V2" ]; then - targetJson="{\"rics\": $targetJson }" - fi - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - - __collect_endpoint_stats "A1PMS" 12 "GET" $A1PMS_API_PREFIX"/v2/rics" $status - __log_test_pass - return 0 + targetJson=$(<./tmp/.tmp_rics.json) + if [ "$A1PMS_VERSION" == "V2" ] || [ "$A1PMS_VERSION" == "V3" ]; then + targetJson="{\"rics\": $targetJson }" + fi + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi + + __collect_endpoint_stats "A1PMS" 12 "GET" ${A1PMS_API_PREFIX}${query} ${status} + __log_test_pass + return 0 } ################################################################## #### API Test case functions Service registry and supervision #### ################################################################## -# API test function: PUT /service and V2 PUT /service +# API test function: PUT /service, V2 PUT /service and V3 PUT a1policymanagement/v1/services # args: # (Function for test scripts) a1pms_api_put_service() { - __log_test_start $@ - if [ $# -ne 4 ]; then - __print_err " " $@ - return 1 - fi - - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/services" - json="{\"callback_url\": \""$4"\",\"keep_alive_interval_seconds\": \""$3"\",\"service_id\": \""$2"\"}" - else - query="/service" - json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}" - fi - file="./tmp/.tmp.json" - echo "$json" > $file - - res="$(__do_curl_to_api A1PMS PUT $query $file)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - __collect_endpoint_stats "A1PMS" 13 "PUT" $A1PMS_API_PREFIX"/v2/service" $status - __log_test_pass - return 0 + __log_test_start $@ + if [ $# -ne 4 ]; then + __print_err " " $@ + return 1 + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/services" + json="{\"callback_url\": \""$4"\",\"keep_alive_interval_seconds\": \""$3"\",\"service_id\": \""$2"\"}" + elif [ "$A1PMS_VERSION" == "V3" ]; then + query="/v1/services" + json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceId\": \""$2"\"}" + else + query="/service" + json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}" + fi + file="./tmp/.tmp.json" + echo "$json" >$file + + res="$(__do_curl_to_api A1PMS PUT $query $file)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + __collect_endpoint_stats "A1PMS" 13 "PUT" $A1PMS_API_PREFIX$query $status + __log_test_pass + return 0 } -# API test function: GET /services and V2 GET /v2/services +# API test function: GET /services, V2 GET /v2/services and V3 /a1policymanagement/v1/services #args: [ ( ) | (NOSERVICE [ ]* )] # (Function for test scripts) a1pms_api_get_services() { - __log_test_start $@ - #Number of accepted parameters: 1, 2, 4, 7, 10, 13,... - paramError=1 - if [ $# -eq 1 ]; then - paramError=0 - elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then - paramError=0 - elif [ $# -eq 5 ]; then - paramError=0 - elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then - argLen=$(($#-2)) - if [ $(($argLen%3)) -eq 0 ]; then - paramError=0 - fi - fi + __log_test_start $@ + #Number of accepted parameters: 1, 2, 4, 7, 10, 13,... + paramError=1 + if [ $# -eq 1 ]; then + paramError=0 + elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then + paramError=0 + elif [ $# -eq 5 ]; then + paramError=0 + elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then + argLen=$(($# - 2)) + if [ $(($argLen % 3)) -eq 0 ]; then + paramError=0 + fi + fi - if [ $paramError -ne 0 ]; then - __print_err " [ ( ) | (NOSERVICE [ ]* )]" $@ - return 1 - fi - - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/services" - - if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then - query="/v2/services?service_id="$2 - fi - else - query="/services" - - if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then - query="/services?name="$2 - fi - fi - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} + if [ $paramError -ne 0 ]; then + __print_err " [ ( ) | (NOSERVICE [ ]* )]" $@ + return 1 + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/services" + if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then + query="/v2/services?service_id="$2 + fi + elif [ "$A1PMS_VERSION" == "V3" ]; then + query="/v1/services" + if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then + query="/v1/services?serviceId="$2 + fi + else + query="/services" + + if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then + query="/services?name="$2 + fi + fi + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -gt 2 ]; then + variableArgCount=$(($# - 2)) + body=${res:0:${#res}-3} + targetJson="[" + shift + shift + cntr=0 + while [ $cntr -lt $variableArgCount ]; do + servicename=$1 + shift + timeout=$1 + shift + callback=$1 + shift + if [ $cntr -gt 0 ]; then + targetJson=$targetJson"," + fi + # timeSinceLastActivitySeconds value cannot be checked since value varies + if [ "$A1PMS_VERSION" == "V2" ]; then + targetJson=$targetJson"{\"service_id\": \""$servicename"\",\"keep_alive_interval_seconds\": "$timeout",\"time_since_last_activity_seconds\":\"????\",\"callback_url\": \""$callback"\"}" + elif [ "$A1PMS_VERSION" == "V3" ]; then + targetJson=$targetJson"{\"serviceId\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}" + else + targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}" + fi + let cntr=cntr+3 + done + targetJson=$targetJson"]" + if [ "$A1PMS_VERSION" == "V2" ]; then + targetJson="{\"service_list\": $targetJson }" + URL_for_Collect_End_Point="/v2/services" + elif [ "$A1PMS_VERSION" == "V3" ]; then + targetJson="{\"serviceList\": $targetJson }" + URL_for_Collect_End_Point="/v1/services" + fi + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + fi - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -gt 2 ]; then - variableArgCount=$(($#-2)) - body=${res:0:${#res}-3} - targetJson="[" - shift; shift; - cntr=0 - while [ $cntr -lt $variableArgCount ]; do - servicename=$1; shift; - timeout=$1; shift; - callback=$1; shift; - if [ $cntr -gt 0 ]; then - targetJson=$targetJson"," - fi - # timeSinceLastActivitySeconds value cannot be checked since value varies - if [ "$A1PMS_VERSION" == "V2" ]; then - targetJson=$targetJson"{\"service_id\": \""$servicename"\",\"keep_alive_interval_seconds\": "$timeout",\"time_since_last_activity_seconds\":\"????\",\"callback_url\": \""$callback"\"}" - else - targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}" - fi - let cntr=cntr+3 - done - targetJson=$targetJson"]" - if [ "$A1PMS_VERSION" == "V2" ]; then - targetJson="{\"service_list\": $targetJson }" - fi - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - - __collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX"/v2/services" $status - __log_test_pass - return 0 + __collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX$URL_for_Collect_End_Point $status + __log_test_pass + return 0 } -# API test function: GET /services V2 GET /v2/services - (only checking service names) +# API test function: GET /services, V2 GET /v2/services and V3 /a1policymanagement/v1/services - (only checking service names) # args: []*" # (Function for test scripts) a1pms_api_get_service_ids() { - __log_test_start $@ - - if [ $# -lt 1 ]; then - __print_err " []*" $@ - return 1 - fi - - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/services" - else - query="/services" - fi - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - body=${res:0:${#res}-3} - targetJson="[" - for rapp in ${@:2} ; do - if [ "$targetJson" != "[" ]; then - targetJson=$targetJson"," - fi - if [ "$A1PMS_VERSION" == "V2" ]; then - targetJson=$targetJson"{\"callback_url\":\"????\",\"keep_alive_interval_seconds\":\"????\",\"service_id\":\""$rapp"\",\"time_since_last_activity_seconds\":\"????\"}" - else - targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}" - fi - done - - targetJson=$targetJson"]" - if [ "$A1PMS_VERSION" == "V2" ]; then - targetJson="{\"service_list\": $targetJson }" - fi - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - - __collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX"/v2/services" $status - __log_test_pass - return 0 + __log_test_start $@ + + if [ $# -lt 1 ]; then + __print_err " []*" $@ + return 1 + fi + + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/services" + elif [ "$A1PMS_VERSION" == "V3" ]; then + query="/v1/services" + else + query="/services" + fi + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + body=${res:0:${#res}-3} + targetJson="[" + for rapp in ${@:2}; do + if [ "$targetJson" != "[" ]; then + targetJson=$targetJson"," + fi + if [ "$A1PMS_VERSION" == "V2" ]; then + targetJson=$targetJson"{\"callback_url\":\"????\",\"keep_alive_interval_seconds\":\"????\",\"service_id\":\""$rapp"\",\"time_since_last_activity_seconds\":\"????\"}" + elif [ "$A1PMS_VERSION" == "V3" ]; then + targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceId\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}" + else + targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}" + fi + done + + targetJson=$targetJson"]" + if [ "$A1PMS_VERSION" == "V2" ]; then + targetJson="{\"service_list\": $targetJson }" + URL_for_Collect_End_Point="/v2/services" + elif [ "$A1PMS_VERSION" == "V3" ]; then + targetJson="{\"serviceList\": $targetJson }" + URL_for_Collect_End_Point="/v1/services" + fi + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 + fi + + __collect_endpoint_stats "A1PMS" 14 "GET" $A1PMS_API_PREFIX$URL_for_Collect_End_Point $status + __log_test_pass + return 0 } -# API test function: DELETE /services and V2 DELETE /v2/services/{serviceId} +# API test function: DELETE /services, V2 DELETE /v2/services/{serviceId} and V3 DELETE a1policymanagement/v1/services/{serviceId} # args: # (Function for test scripts) a1pms_api_delete_services() { - __log_test_start $@ - - if [ $# -ne 2 ]; then - __print_err " " $@ - return 1 - fi - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/services/"$2 - else - query="/services?name="$2 - fi - res="$(__do_curl_to_api A1PMS DELETE $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - __collect_endpoint_stats "A1PMS" 15 "DELETE" $A1PMS_API_PREFIX"/v2/services/{serviceId}" $status - __log_test_pass - return 0 + __log_test_start $@ + + if [ $# -ne 2 ]; then + __print_err " " $@ + return 1 + fi + if [ "$A1PMS_VERSION" == "V2" ]; then + url_part="/v2/services/" + query=${url_part}${2} + elif [ "$A1PMS_VERSION" == "V3" ]; then + url_part="/v1/services/" + query=${url_part}${2} + else + query="/services?name="$2 + fi + res="$(__do_curl_to_api A1PMS DELETE $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + __collect_endpoint_stats "A1PMS" 15 "DELETE" ${A1PMS_API_PREFIX}${url_part}"{serviceId}" $status + __log_test_pass + return 0 } -# API test function: PUT /services/keepalive and V2 PUT /v2/services/{service_id}/keepalive +# API test function: PUT /services/keepalive, V2 PUT /v2/services/{service_id}/keepalive and V3 DELETE a1policymanagement/v1/services/{serviceId} # args: # (Function for test scripts) a1pms_api_put_services_keepalive() { - __log_test_start $@ - - if [ $# -ne 2 ]; then - __print_err " " $@ - return 1 - fi - if [ "$A1PMS_VERSION" == "V2" ]; then - query="/v2/services/$2/keepalive" - else - query="/services/keepalive?name="$2 - fi - - res="$(__do_curl_to_api A1PMS PUT $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - __collect_endpoint_stats "A1PMS" 16 "PUT" $A1PMS_API_PREFIX"/v2/services/{service_id}/keepalive" $status - __log_test_pass - return 0 + __log_test_start $@ + + if [ $# -ne 2 ]; then + __print_err " " $@ + return 1 + fi + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/services/$2/keepalive" + elif [ "$A1PMS_VERSION" == "V3" ]; then + query="/v1/services/$2/keepalive" + else + query="/services/keepalive?name="$2 + fi + + if [ "$A1PMS_VERSION" == "V3" ]; then + empty_json_body={} + res="$(__do_curl_to_api A1PMS PUT ${query} ${empty_json_body})" + else + res="$(__do_curl_to_api A1PMS PUT ${query})" + fi + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code ${1} ${status} + return 1 + fi + + __collect_endpoint_stats "A1PMS" 16 "PUT" ${A1PMS_API_PREFIX}${query} ${status} + __log_test_pass + return 0 } ################################################################## #### API Test case functions Configuration #### ################################################################## -# API Test function: PUT /v2/configuration +# API Test function: PUT "/v2/configuration" or V3 PUT "a1policymanagement/v1/configuration" # args: # (Function for test scripts) a1pms_api_put_configuration() { - __log_test_start $@ - - if [ "$A1PMS_VERSION" != "V2" ]; then - __log_test_fail_not_supported - return 1 - fi - - if [ $# -ne 2 ]; then - __print_err " " $@ - return 1 - fi - if [ ! -f $2 ]; then - __log_test_fail_general "Config file "$2", does not exist" - return 1 - fi - inputJson=$(< $2) - # if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header - # inputJson="{\"config\":"$inputJson"}" - # fi - file="./tmp/.config.json" - echo $inputJson > $file - query="/v2/configuration" - res="$(__do_curl_to_api A1PMS PUT $query $file)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - __collect_endpoint_stats "A1PMS" 17 "PUT" $A1PMS_API_PREFIX"/v2/configuration" $status - __log_test_pass - return 0 + __log_test_start $@ + + if [ "$A1PMS_VERSION" != "V2" ] && [ "$A1PMS_VERSION" != "V3" ]; then + __log_test_fail_not_supported + return 1 + fi + + if [ $# -ne 2 ]; then + __print_err " " $@ + return 1 + fi + if [ ! -f $2 ]; then + __log_test_fail_general "Config file "$2", does not exist" + return 1 + fi + inputJson=$(<$2) + # if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header + # inputJson="{\"config\":"$inputJson"}" + # fi + file="./tmp/.config.json" + echo $inputJson >$file + if [ "$A1PMS_VERSION" == "V2" ]; then + query="/v2/configuration" + elif [ "$A1PMS_VERSION" == "V3" ]; then + #V3 has baseurl changes 'a1-policy/v2' to 'a1policymanagement/v1' + query="/v1/configuration" + fi + res="$(__do_curl_to_api A1PMS PUT $query $file)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + __collect_endpoint_stats "A1PMS" 17 "PUT" $A1PMS_API_PREFIX$query $status + __log_test_pass + return 0 } -# API Test function: GET /v2/configuration +# API Test function: GET /v2/configuration and V3 GET a1policymanagement/v1/configuration # args: [] # (Function for test scripts) a1pms_api_get_configuration() { - __log_test_start $@ - - if [ "$A1PMS_VERSION" != "V2" ]; then - __log_test_fail_not_supported - return 1 - fi - - if [ $# -lt 1 ] || [ $# -gt 2 ]; then - __print_err " []" $@ - return 1 + __log_test_start $@ + + if [ "$A1PMS_VERSION" != "V2" ] && [ "$A1PMS_VERSION" != "V3" ]; then + __log_test_fail_not_supported + return 1 + fi + + if [ $# -lt 1 ] || [ $# -gt 2 ]; then + __print_err " []" $@ + return 1 + fi + if [ ! -f $2 ]; then + __log_test_fail_general "Config file "$2" for comparison, does not exist" + return 1 + fi + + if [ "$A1PMS_VERSION" == "V3" ]; then + #The V3 of a1-pms URL is a1policymanagement/v1 and the v2 is a1-policy/v2 + query="/v1/configuration" + else + query="/v2/configuration" + fi + res="$(__do_curl_to_api A1PMS GET $query)" + status=${res:${#res}-3} + + if [ $status -ne $1 ]; then + __log_test_fail_status_code $1 $status + return 1 + fi + + if [ $# -eq 2 ]; then + + body=${res:0:${#res}-3} + + targetJson=$(<$2) + # if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header + # inputJson="{\"config\":"$inputJson"}" + # fi + echo "TARGET JSON: $targetJson" >>$HTTPLOG + res=$(python3 ../common/compare_json.py "$targetJson" "$body") + + if [ $res -ne 0 ]; then + __log_test_fail_body + return 1 fi - if [ ! -f $2 ]; then - __log_test_fail_general "Config file "$2" for comparison, does not exist" - return 1 - fi - - query="/v2/configuration" - res="$(__do_curl_to_api A1PMS GET $query)" - status=${res:${#res}-3} - - if [ $status -ne $1 ]; then - __log_test_fail_status_code $1 $status - return 1 - fi - - if [ $# -eq 2 ]; then - - body=${res:0:${#res}-3} - - targetJson=$(< $2) - # if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header - # inputJson="{\"config\":"$inputJson"}" - # fi - echo "TARGET JSON: $targetJson" >> $HTTPLOG - res=$(python3 ../common/compare_json.py "$targetJson" "$body") - - if [ $res -ne 0 ]; then - __log_test_fail_body - return 1 - fi - fi - - __collect_endpoint_stats "A1PMS" 18 "GET" $A1PMS_API_PREFIX"/v2/configuration" $status - __log_test_pass - return 0 + fi + + if [ "$A1PMS_VERSION" == "V3" ]; then + __collect_endpoint_stats "A1PMS" 18 "GET" $A1PMS_API_PREFIX"/v1/configuration" $status + else + __collect_endpoint_stats "A1PMS" 18 "GET" $A1PMS_API_PREFIX"/v2/configuration" $status + fi + __log_test_pass + return 0 } ########################################## @@ -2410,28 +3206,28 @@ a1pms_api_get_configuration() { # (Function for test scripts) a1pms_kube_pvc_reset() { - __log_test_start $@ + __log_test_start $@ - pvc_name=$(kubectl $KUBECONF get pvc -n $KUBE_NONRTRIC_NAMESPACE --no-headers -o custom-columns=":metadata.name" | grep policy) - if [ -z "$pvc_name" ]; then - pvc_name=policymanagementservice-vardata-pvc - fi - echo " Trying to reset pvc: "$pvc_name - __kube_clean_pvc $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE $pvc_name $A1PMS_CONTAINER_MNT_DIR + pvc_name=$(kubectl $KUBECONF get pvc -n $KUBE_NONRTRIC_NAMESPACE --no-headers -o custom-columns=":metadata.name" | grep policy) + if [ -z "$pvc_name" ]; then + pvc_name=policymanagementservice-vardata-pvc + fi + echo " Trying to reset pvc: "$pvc_name + __kube_clean_pvc $A1PMS_APP_NAME $KUBE_NONRTRIC_NAMESPACE $pvc_name $A1PMS_CONTAINER_MNT_DIR - __log_test_pass - return 0 + __log_test_pass + return 0 } # args: a1pms_configure_sec() { - export A1PMS_CREDS_GRANT_TYPE="client_credentials" - export A1PMS_CREDS_CLIENT_SECRET=$3 - export A1PMS_CREDS_CLIENT_ID=$2 - export A1PMS_AUTH_SERVICE_URL=$KEYCLOAK_SERVICE_PATH$KEYCLOAK_TOKEN_URL_PREFIX/$1/protocol/openid-connect/token - export A1PMS_SIDECAR_MOUNT="/token-cache" - export A1PMS_SIDECAR_JWT_FILE=$A1PMS_SIDECAR_MOUNT"/jwt.txt" - - export AUTHSIDECAR_APP_NAME - export AUTHSIDECAR_DISPLAY_NAME -} \ No newline at end of file + export A1PMS_CREDS_GRANT_TYPE="client_credentials" + export A1PMS_CREDS_CLIENT_SECRET=$3 + export A1PMS_CREDS_CLIENT_ID=$2 + export A1PMS_AUTH_SERVICE_URL=$KEYCLOAK_SERVICE_PATH$KEYCLOAK_TOKEN_URL_PREFIX/$1/protocol/openid-connect/token + export A1PMS_SIDECAR_MOUNT="/token-cache" + export A1PMS_SIDECAR_JWT_FILE=$A1PMS_SIDECAR_MOUNT"/jwt.txt" + + export AUTHSIDECAR_APP_NAME + export AUTHSIDECAR_DISPLAY_NAME +}