X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=solution%2Fintegration%2Fsmo%2Fnon-rt-ric%2Fdata%2FprepareDmaapMsg.sh;fp=solution%2Fintegration%2Fsmo%2Fnon-rt-ric%2Fdata%2FprepareDmaapMsg.sh;h=0000000000000000000000000000000000000000;hb=a3be9ade3bec5ca8cd5b41032704872f87d8c065;hp=0a65a2e08f8f90c121b87e11bb7b75b5791f3c20;hpb=edb545c89d2f8e8785b4fd4a8d5b0bbe28aca400;p=oam.git

diff --git a/solution/integration/smo/non-rt-ric/data/prepareDmaapMsg.sh b/solution/integration/smo/non-rt-ric/data/prepareDmaapMsg.sh
deleted file mode 100755
index 0a65a2e..0000000
--- a/solution/integration/smo/non-rt-ric/data/prepareDmaapMsg.sh
+++ /dev/null
@@ -1,156 +0,0 @@
-#!/bin/bash
-
-#  ============LICENSE_START===============================================
-#  Copyright (C) 2020 Nordix Foundation. All rights reserved.
-#  ========================================================================
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-#  ============LICENSE_END=================================================
-#
-
-# The scripts in data/ will generate some dummy data in the running system.
-# It will create:
-# one policy type in a1-sim-OSC
-# one service in policy agent
-# one policy in a1-sim-OSC
-# one policy in a1-sim-STD
-
-# Run command:
-# ./prepareDmaapMsg.sh [dmaap-mr port] [a1-sim-OSC port] [a1-sim-STD port] [http/https]
-
-dmaa_mr_port=${1:-3904}
-a1_sim_OSC_port=${2:-30001}
-a1_sim_STD_port=${3:-30003}
-a1_sim_STD_v2_port=${4:-30005}
-httpx=${5:-"http"}
-SHELL_FOLDER=$(cd "$(dirname "$0")";pwd)
-
-echo "using dmaap-mr port: "$dmaa_mr_port
-echo "using a1-sim-OSC port: "$a1_sim_OSC_port
-echo "using a1-sim-STD port: "$a1_sim_STD_port
-echo "using a1-sim-STD-v2 port: "$a1_sim_STD_v2_port
-echo "using protocol: "$httpx
-echo -e "\n"
-
-echo "dmaap-mr topics:"
-curl -skw %{http_code} $httpx://localhost:$dmaa_mr_port/topics/listAll
-echo -e "\n"
-
-echo "dmaap-mr create topic A1-POLICY-AGENT-READ:"
-curl -skw %{http_code} -X POST "$httpx://localhost:$dmaa_mr_port/topics/create" -H  "accept: application/json" -H  "Content-Type: application/json" -d "{  \"topicName\": \"A1-POLICY-AGENT-READ\",  \"topicDescription\": \"test topic\",  \"partitionCount\": 1,  \"replicationCount\": 1,  \"transactionEnabled\": \"false\"}"
-echo -e "\n"
-
-echo "dmaap-mr create topic A1-POLICY-AGENT-WRITE:"
-curl -skw %{http_code} -X POST "$httpx://localhost:$dmaa_mr_port/topics/create" -H  "accept: application/json" -H  "Content-Type: application/json" -d "{  \"topicName\": \"A1-POLICY-AGENT-WRITE\",  \"topicDescription\": \"test topic\",  \"partitionCount\": 1,  \"replicationCount\": 1,  \"transactionEnabled\": \"false\"}"
-echo -e "\n"
-
-echo "dmaap-mr topics:"
-curl -skw %{http_code} $httpx://localhost:$dmaa_mr_port/topics/listAll
-echo -e "\n"
-
-echo "ric1 version:"
-curl -skw %{http_code} $httpx://localhost:$a1_sim_OSC_port/counter/interface
-echo -e "\n"
-
-echo "ric2 version:"
-curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_port/counter/interface
-echo -e "\n"
-
-echo "ric3 version:"
-curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_v2_port/counter/interface
-echo -e "\n"
-
-echo "create policy type 1 to ric1:"
-curl -X PUT -skw %{http_code} $httpx://localhost:$a1_sim_OSC_port/policytype?id=1 -H Content-Type:application/json --data-binary @${SHELL_FOLDER}/testdata/OSC/policy_type.json
-echo -e "\n"
-
-echo "create policy type 2 to ric3:"
-curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_v2_port/policytype?id=2 -X PUT -H Accept:application/json -H Content-Type:application/json -H X-Requested-With:XMLHttpRequest --data-binary @${SHELL_FOLDER}/testdata/v2/policy_type.json
-echo -e "\n"
-
-for i in {1..12}; do
-	echo "policy types from policy agent:"
-    curlString="curl -skw %{http_code} $httpx://localhost:8091/a1-policy/v2/policy-types"
-    res=$($curlString)
-    echo "$res"
-    expect="{\"policytype_ids\":[\"1\",\"2\"]}200"
-    if [ "$res" == "$expect" ]; then
-        echo -e "\n"
-        break;
-    else
-        sleep $i
-    fi
-done
-
-## Using PMS v1 interface
-echo "create service 1 to policy agent via dmaap_mr:"
-curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @${SHELL_FOLDER}/testdata/dmaap/v1/dmaap-msg-service-create.json
-echo -e "\n"
-
-echo "get result from mr of previous request:"
-curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
-echo -e "\n"
-
-echo "create policies to ric1 & ric2 & ric3 with type1 and service1 via dmaa_mr:"
-curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @${SHELL_FOLDER}/testdata/dmaap/v1/dmaap-msg-policy-create.json
-echo -e "\n"
-
-echo "get result from mr of previous request:"
-curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
-echo -e "\n"
-
-echo "get policy from policy agent via dmaap_mr:"
-curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @${SHELL_FOLDER}/testdata/dmaap/v1/dmaap-msg-policy-get.json
-echo -e "\n"
-
-echo "get result from mr of previous request:"
-curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
-echo -e "\n"
-
-## Using PMS v2 interface
-echo "create service 2 to policy agent via dmaap_mr:"
-curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @${SHELL_FOLDER}/testdata/dmaap/v2/dmaap-msg-service-create.json
-echo -e "\n"
-
-echo "get result from mr of previous request:"
-curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
-echo -e "\n"
-
-echo "create policies to ric1 & ric2 & ric3 with type1 and service1 via dmaa_mr:"
-curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @${SHELL_FOLDER}/testdata/dmaap/v2/dmaap-msg-policy-create.json
-echo -e "\n"
-
-echo "get result from mr of previous request:"
-curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
-echo -e "\n"
-
-echo "get policy from policy agent via dmaap_mr:"
-curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @${SHELL_FOLDER}/testdata/dmaap/v2/dmaap-msg-policy-get.json
-echo -e "\n"
-
-echo "get result from mr of previous request:"
-curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
-echo -e "\n"
-
-## Get metric from rics
-echo "policy numbers from ric1:"
-curl -skw %{http_code} $httpx://localhost:$a1_sim_OSC_port/counter/num_instances
-echo -e "\n"
-
-echo "policy numbers from ric2:"
-curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_port/counter/num_instances
-echo -e "\n"
-
-echo "policy numbers from ric3:"
-curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_v2_port/counter/num_instances
-echo -e "\n"
-