X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=smo-install%2Ftest%2Fa1-validation%2Fsubscripts%2FprepareDmaapMsg.sh;fp=smo-install%2Ftest%2Fa1-validation%2Fsubscripts%2FprepareDmaapMsg.sh;h=9a06a864847b46d580fe7cdbf6b1e7ae1c71bbbe;hb=edc7d501e675517ea6fc14cfdf7f22b1ac7b1705;hp=0000000000000000000000000000000000000000;hpb=a2c2df5014145ee3126146987d9039e397b12407;p=it%2Fdep.git

diff --git a/smo-install/test/a1-validation/subscripts/prepareDmaapMsg.sh b/smo-install/test/a1-validation/subscripts/prepareDmaapMsg.sh
new file mode 100755
index 00000000..9a06a864
--- /dev/null
+++ b/smo-install/test/a1-validation/subscripts/prepareDmaapMsg.sh
@@ -0,0 +1,157 @@
+#!/bin/bash
+
+#  ============LICENSE_START===============================================
+#  Copyright (C) 2020 Nordix Foundation. All rights reserved.
+#  ========================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#  ============LICENSE_END=================================================
+#
+
+# The scripts in data/ will generate some dummy data in the running system.
+# It will create:
+# one policy type in a1-sim-OSC
+# one service in policy agent
+# one policy in a1-sim-OSC
+# one policy in a1-sim-STD
+
+# Run command:
+# ./prepareDmaapMsg.sh [dmaap-mr url] [a1-sim-OSC url] [a1-sim-STD url] [a1-sim-STD2 url] [http/https]
+
+dmaap_mr_url=${1:-localhost:3904}
+a1_sim_OSC_url=${2:-localhost:8085}
+a1_sim_STD_url=${3:-localhost:8085}
+a1_sim_STD_v2_url=${4:-localhost:8085}
+policy_agent_url=${5:-localhost:9081}
+httpx=${6:-"http"}
+
+echo "using dmaap-mr url: "$dmaap_mr_url
+echo "using a1-sim-OSC url: "$a1_sim_OSC_url
+echo "using a1-sim-STD url: "$a1_sim_STD_url
+echo "using a1-sim-STD-v2 url: "$a1_sim_STD_v2_url
+echo "using policy-agent url: "$policy_agent_url
+echo "using protocol: "$httpx
+echo -e "\n"
+
+echo "dmaap-mr topics: $httpx://$dmaap_mr_url/topics/listAll"
+curl -skw %{http_code} $httpx://$dmaap_mr_url/topics/listAll
+echo -e "\n"
+
+echo "dmaap-mr create topic A1-POLICY-AGENT-READ:"
+curl -skw %{http_code} -X POST "$httpx://$dmaap_mr_url/topics/create" -H  "accept: application/json" -H  "Content-Type: application/json" -d "{  \"topicName\": \"A1-POLICY-AGENT-READ\",  \"topicDescription\": \"test topic\",  \"partitionCount\": 1,  \"replicationCount\": 1,  \"transactionEnabled\": \"false\"}"
+echo -e "\n"
+
+echo "dmaap-mr create topic A1-POLICY-AGENT-WRITE:"
+curl -skw %{http_code} -X POST "$httpx://$dmaap_mr_url/topics/create" -H  "accept: application/json" -H  "Content-Type: application/json" -d "{  \"topicName\": \"A1-POLICY-AGENT-WRITE\",  \"topicDescription\": \"test topic\",  \"partitionCount\": 1,  \"replicationCount\": 1,  \"transactionEnabled\": \"false\"}"
+echo -e "\n"
+
+echo "dmaap-mr topics:"
+curl -skw %{http_code} $httpx://$dmaap_mr_url/topics/listAll
+echo -e "\n"
+
+echo "ric1 version:"
+curl -skw %{http_code} $httpx://$a1_sim_OSC_url/counter/interface
+echo -e "\n"
+
+echo "ric2 version:"
+curl -skw %{http_code} $httpx://$a1_sim_STD_url/counter/interface
+echo -e "\n"
+
+echo "ric3 version:"
+curl -skw %{http_code} $httpx://$a1_sim_STD_v2_url/counter/interface
+echo -e "\n"
+
+echo "create policy type 1 to ric1:"
+curl -X PUT -skw %{http_code} $httpx://$a1_sim_OSC_url/policytype?id=1 -H Content-Type:application/json --data-binary @../data/OSC/policy_type.json
+echo -e "\n"
+
+echo "create policy type 2 to ric3:"
+curl -skw %{http_code} $httpx://$a1_sim_STD_v2_url/policytype?id=2 -X PUT -H Accept:application/json -H Content-Type:application/json -H X-Requested-With:XMLHttpRequest --data-binary @../data/v2/policy_type.json
+echo -e "\n"
+
+for i in {1..60}; do
+	echo "policy types from policy agent:"
+    curlString="curl -skw %{http_code} $httpx://$policy_agent_url/policy_types"
+    res=$($curlString)
+    echo "$res"
+    expect="[\"\",\"1\",\"2\"]200"
+    if [ "$res" == "$expect" ]; then
+        echo -e "\n"
+        break;
+    else
+        sleep $i
+    fi
+done
+
+## Using PMS v1 interface
+echo "create service 1 to policy agent via dmaap_mr:"
+curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-READ/" --data-binary @../data/dmaap/v1/dmaap-msg-service-create.json
+echo -e "\n"
+
+echo "get result from mr of previous request:"
+curl -X GET "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
+echo -e "\n"
+
+echo "create policies to ric1 & ric2 & ric3 with type1 and service1 via dmaa_mr:"
+curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-READ/" --data-binary @../data/dmaap/v1/dmaap-msg-policy-create.json
+echo -e "\n"
+
+echo "get result from mr of previous request:"
+curl -X GET "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
+echo -e "\n"
+
+echo "get policy from policy agent via dmaap_mr:"
+curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-READ/" --data-binary @../data/dmaap/v1/dmaap-msg-policy-get.json
+echo -e "\n"
+
+echo "get result from mr of previous request:"
+curl -X GET "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
+echo -e "\n"
+
+## Using PMS v2 interface
+echo "create service 2 to policy agent via dmaap_mr:"
+curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-READ/" --data-binary @../data/dmaap/v2/dmaap-msg-service-create.json
+echo -e "\n"
+
+echo "get result from mr of previous request:"
+curl -X GET "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
+echo -e "\n"
+
+echo "create policies to ric1 & ric2 & ric3 with type1 and service1 via dmaa_mr:"
+curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-READ/" --data-binary @../data/dmaap/v2/dmaap-msg-policy-create.json
+echo -e "\n"
+
+echo "get result from mr of previous request:"
+curl -X GET "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
+echo -e "\n"
+
+echo "get policy from policy agent via dmaap_mr:"
+curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-READ/" --data-binary @../data/dmaap/v2/dmaap-msg-policy-get.json
+echo -e "\n"
+
+echo "get result from mr of previous request:"
+curl -X GET "$httpx://$dmaap_mr_url/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
+echo -e "\n"
+
+## Get metric from rics
+echo "policy numbers from ric1:"
+curl -skw %{http_code} $httpx://$a1_sim_OSC_url/counter/num_instances
+echo -e "\n"
+
+echo "policy numbers from ric2:"
+curl -skw %{http_code} $httpx://$a1_sim_STD_url/counter/num_instances
+echo -e "\n"
+
+echo "policy numbers from ric3:"
+curl -skw %{http_code} $httpx://$a1_sim_STD_v2_url/counter/num_instances
+echo -e "\n"
+