X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=smo-install%2FREADME.md;h=e52ef1b7dddf903233a8074af223836c6109a115;hb=refs%2Fchanges%2F41%2F12941%2F3;hp=3cce91503e3d4f8fdcddebcb9997399e687eea39;hpb=facf93e436bfe13e866f86a510bad8c1c9c85430;p=it%2Fdep.git diff --git a/smo-install/README.md b/smo-install/README.md index 3cce9150..e52ef1b7 100644 --- a/smo-install/README.md +++ b/smo-install/README.md @@ -1,15 +1,15 @@ -# ORAN SMO Package +# O-RAN SMO Package This project uses different helm charts from different Linux Foundation projects and integrate them into a unique SMO deployment.
The ONAP and ORAN project helm charts are built and then configured by using "helm override" so that it represents a valid ORAN SMO installation.
-It contains also provisioning scripts that can be used to bootstrap the platform and execute test usecases, network simulators, a1 simulators, cnf network simulators, etc ...
+It contains also provisioning scripts that can be used to bootstrap the platform and execute test use cases, network simulators, a1 simulators, cnf network simulators, etc ...
Note: The CNF part is still a "work in progress" so not well documented, it's a DU/RU/topology server deployment done by ONAP SO instantiation. -It has been created out of the ONAP vfirewall usecase. +It has been created out of the ONAP vfirewall use case. ## Quick Installation on blank node -* Setup a VM with 40GB Memory, 6VCPU, 60GB of diskspace. +* Setup a VM with 40GB Memory, 6VCPU, 60GB of disk space. * Install an ubuntu live server 20.04 LTS (https://releases.ubuntu.com/20.04/ubuntu-20.04.3-live-server-amd64.iso) * Install snap and restart the shell session: sudo apt-get install snapd -y * Execute the following commands being logged as root: @@ -17,45 +17,52 @@ It has been created out of the ONAP vfirewall usecase. ```git clone --recursive https://github.com/sebdet/oran-deployment.git``` - ```./oran-deployment/scripts/layer-0/0-setup-microk8s.sh``` + ```./dep/smo-install/scripts/layer-0/0-setup-microk8s.sh``` - ```./oran-deployment/scripts/layer-0/0-setup-charts-museum.sh``` - - ```./oran-deployment/scripts/layer-0/0-setup-helm3.sh``` - - ```./oran-deployment/scripts/layer-1/1-build-all-charts.sh``` + ```./dep/smo-install/scripts/layer-0/0-setup-charts-museum.sh``` - ```./oran-deployment/scripts/layer-2/2-install-oran.sh``` + ```./dep/smo-install/scripts/layer-0/0-setup-helm3.sh``` + + ```./dep/smo-install/scripts/layer-1/1-build-all-charts.sh``` + + ```./dep/smo-install/scripts/layer-2/2-install-oran.sh``` Verify pods: ```kubectl get pods -n onap && kubectl get pods -n nonrtric``` - + When all pods in "onap" and "nonrtric" namespaces are well up & running: - - ```./oran-deployment/scripts/layer-2/2-install-simulators.sh``` + + ```./dep/smo-install/scripts/layer-2/2-install-simulators.sh``` ## Quick Installation on existing kubernetes -* Ensure you have at least 20GB Memory, 6VCPU, 60GB of diskspace. -* Execute the following commands being logged as root: +* Ensure you have at least 20GB Memory, 6VCPU, 60GB of disk space. + + ```git clone --recursive "https://gerrit.o-ran-sc.org/r/it/dep"``` + + ```./dep/smo-install/scripts/layer-0/0-setup-charts-museum.sh``` - ```git clone --recursive git@github.com:gmngueko/oran-deployment.git``` + ```./dep/smo-install/scripts/layer-0/0-setup-helm3.sh``` - ```./oran-deployment/scripts/layer-0/0-setup-charts-museum.sh``` - - ```./oran-deployment/scripts/layer-0/0-setup-helm3.sh``` - - ```./oran-deployment/scripts/layer-1/1-build-all-charts.sh``` + ```./dep/smo-install/scripts/layer-1/1-build-all-charts.sh``` - ```./oran-deployment/scripts/layer-2/2-install-oran.sh``` + ```./dep/smo-install/scripts/layer-2/2-install-oran.sh``` + + Verify pods: + + ```kubectl get pods -n onap && kubectl get pods -n nonrtric``` + + When all pods in "onap" and "nonrtric" namespaces are well up & running: + + ```./smo-install/scripts/layer-2/2-install-simulators.sh``` Verify pods: ```kubectl get pods -n onap && kubectl get pods -n nonrtric``` - + When all pods in "onap" and "nonrtric" namespaces are well up & running: - - ```./oran-deployment/scripts/layer-2/2-install-simulators.sh``` + + ```./dep/smo-install/scripts/layer-2/2-install-simulators.sh``` ## Structure @@ -107,7 +114,7 @@ The user entry point is located in the scripts folder â  âââ layer-2 <--- Scripts to install SMO package â  â  âââ 2-install-nonrtric-only.sh <--- Install SMO NONRTRIC k8s namespace only â  â  âââ 2-install-oran-cnf.sh <--- Install SMO full with ONAP CNF features -â  â  âââ 2-install-oran.sh <--- Install SMO minimal +â  â  âââ 2-install-oran.sh <--- Install SMO minimal â  â  âââ 2-install-simulators.sh <--- Install Network simulator (RU/DU/Topology Server) â  â  âââ 2-upgrade-simulators.sh <--- Upgrade the simulators install at runtime when changes are done on override files â  âââ sub-scripts <--- Sub-Scripts used by the main layer-0, layer-1, layer-2 @@ -147,20 +154,20 @@ Use git clone to get it on your server (github ssh key config is required): Note: The current repository has multiple sub git submodules, therefore the --recursive flag is absolutely REQUIRED - + ## Requirements: * K8S node setup with Helm 3 and Kubectl properly configured (tested with K8S v1.21.5 and HELM v3.5.4). FOR K8S installation, multiple options are available: - MicroK8S standalone deployment: - ```./oran-deployment/scripts/layer-0/0-setup-microk8s.sh``` + ```./dep/smo-install/scripts/layer-0/0-setup-microk8s.sh``` OR this wiki can help to setup it (Section 1, 2 and 3): https://wiki.onap.org/display/DW/Deploy+OOM+and+SDC+%28or+ONAP%29+on+a+single+VM+with+microk8s+-+Honolulu+Setup - - KubeSpray using ONAP multicloud KUD (https://git.onap.org/multicloud/k8s/tree/kud) installation by executing(this is required for ONAP CNF deployments): - - ```./oran-deployment/scripts/layer-0/0-setup-kud-node.sh``` - + - KubeSpray using ONAP multicloud KUD (https://git.onap.org/multicloud/k8s/tree/kud) installation by executing(this is required for ONAP CNF deployments): + + ```./dep/smo-install/scripts/layer-0/0-setup-kud-node.sh``` + - Use an existing K8S installation (Cloud, etc ...). - .... @@ -168,58 +175,62 @@ Use git clone to get it on your server (github ssh key config is required): * ChartMuseum to store the HELM charts on the server, multiple options are available: - Execute the install script: - ```./oran-deployment/scripts/layer-0/0-setup-charts-museum.sh``` - - ```./oran-deployment/scripts/layer-0/0-setup-helm3.sh``` + ```./dep/smo-install/scripts/layer-0/0-setup-charts-museum.sh``` + + ```./dep/smo-install/scripts/layer-0/0-setup-helm3.sh``` - Install chartmuseum manually on port 18080 (https://chartmuseum.com/#Instructions, https://github.com/helm/chartmuseum) - + ## Configuration: -In the ./helm-override/ folder the helm config that are used by the SMO installation. +In the ./helm-override/ folder the helm config that are used by the SMO installation.Different flavors are preconfigured, and should NOT be changed unless you intentionally want to updates some configurations.
## Installation:
-* Build ONAP/ORAN charts
+* Build ONAP/ORAN charts
- ```./oran-deployment/scripts/layer-1/1-build-all-charts.sh```
+ ```./dep/smo-install/scripts/layer-1/1-build-all-charts.sh```
* Choose the installation:
- - ONAP + ORAN "nonrtric" (RECOMMENDED ONE):
-
- ```./oran-deployment/scripts/layer-2/2-install-oran.sh```
- - ORAN "nonrtric" par only:
-
- ```./oran-deployment/scripts/layer-2/2-install-nonrtric-only.sh```
+ - ONAP + ORAN "nonrtric" (RECOMMENDED ONE):
+
+ ```./dep/smo-install/scripts/layer-2/2-install-oran.sh```
+ - ORAN "nonrtric" part only(To work with ONAP):
- - ONAP CNF + ORAN "nonrtric" (This must still be documented properly):
+ ```./dep/smo-install/scripts/layer-2/2-install-nonrtric-only.sh```
- ```./oran-deployment/scripts/layer-2/2-install-oran-cnf.sh```
+ - ORAN "nonrtric" standalone:
+
+ ```./dep/smo-install/scripts/layer-2/2-install-nonrtric-only.sh standalone-nonrtric```
+
+ - ONAP CNF + ORAN "nonrtric" (This must still be documented properly):
+
+ ```./dep/smo-install/scripts/layer-2/2-install-oran-cnf.sh```
* Install the network simulators (DU/RU/Topo):
- When all pods in "onap" and "nonrtric" namespaces are well up & running:
-
+
```kubectl get pods -n onap && kubectl get pods -n nonrtric```
- Execute the install script:
-
- ```./oran-deployment/scripts/layer-2/2-install-simulators.sh```
+
+ ```./dep/smo-install/scripts/layer-2/2-install-simulators.sh```
- Check the simulators status:
```kubectl get pods -n network```
- Note: The simulators topology can be customized in the file ./oran-deployment/helm-override/network-simulators-topology-override.yaml
+ Note: The simulators topology can be customized in the file ./smo-install/helm-override/network-simulators-topology-override.yaml
## Platform access points:
-* SDNR WEB:
+* SDNR WEB:
https://