X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=scripts%2Fbuild_oran.sh;h=f0bde6f9bd3cce07c357aba24bfcc599a6a30e19;hb=bd98a41547400e873da69f2fa45d9e4b91b32bb7;hp=fd8df20e6a069da064aefd30a90557b316faf128;hpb=be9f4e2b8f45d1c8f5f33b5c112695715d429166;p=pti%2Frtp.git

diff --git a/scripts/build_oran.sh b/scripts/build_oran.sh
index fd8df20..f0bde6f 100755
--- a/scripts/build_oran.sh
+++ b/scripts/build_oran.sh
@@ -1,13 +1,44 @@
-#!/bin/sh
+#!/bin/bash
+#
+# Copyright (C) 2019 Wind River Systems, Inc.
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+
+# Ensure we fail the job if any steps fail.
+set -e -o pipefail
+
+SUPPORTED_BSP="intel-x86-64 nxp-lx2xxx"
+WRTEMPLATE_COMMON="feature/oran-host-rt-tune feature/kubernetes feature/self-hosted"
+WRTEMPLATE_X86="feature/hosts-ia feature/kvm feature/dpdk"
+
+SRC_ORAN_BRANCH="bronze"
+SRC_WRL_BRANCH="WRLINUX_10_18_BASE"
+SRC_WRL_URL="git://github.com/WindRiver-Labs/wrlinux-x.git"
+
+SCRIPTS_DIR=$(dirname $(readlink -f $0))
 
 help_info () {
 cat << ENDHELP
 Usage:
-$(basename $0) <-w WORKSPACE_DIR> [-n] [-h]
+$(basename $0) <-w WORKSPACE_DIR> [-b BSP] [-n] [-h] [-r]
 where:
     -w WORKSPACE_DIR is the path for the project
+    -b BPS is one of supported BSP: "${SUPPORTED_BSP}"
+       (default is intel-x86-64 if not specified.)
     -n dry-run only for bitbake
     -h this help info
+    -e EXTRA_CONF is the pat for extra config file
+    -r whether to inherit rm_work (default is Yes)
 ENDHELP
 }
 
@@ -21,7 +52,7 @@ echo_error () {
 
 echo_cmd () {
     echo
-    echo "$1"
+    echo_info "$1"
     echo "CMD: ${RUN_CMD}"
 }
 
@@ -31,19 +62,60 @@ if [ $# -eq 0 ]; then
     exit
 fi
 
-DRYRUN=""
+check_yn_rm_work () {
+    yn="$1"
+    case ${yn} in
+        [Yy]|[Yy]es)
+            RM_WORK="Yes"
+            ;;
+        [Nn]|[Nn]o)
+            RM_WORK="No"
+            ;;
+        *)
+            echo "Invalid arg for -r option."
+            help_info
+            exit 1
+            ;;
+    esac
+}
 
-SCRIPTS_DIR=`dirname $0`
-SCRIPTS_DIR=`readlink -f $SCRIPTS_DIR`
+check_valid_bsp () {
+    bsp="$1"
+    for b in ${SUPPORTED_BSP}; do
+        if [ "${bsp}" == "${b}" ]; then
+            BSP_VALID="${bsp}"
+            break
+        fi
+    done
+    if [ -z "${BSP_VALID}" ]; then
+        echo_error "${bsp} is not a supported BSP, the supported BSPs are: ${SUPPORTED_BSP}"
+        exit 1
+    fi
+}
 
-while getopts "w:nh" OPTION; do
+DRYRUN=""
+EXTRA_CONF=""
+RM_WORK="Yes"
+BSP="intel-x86-64"
+IMAGE_TYPE="iso"
+
+while getopts "w:b:e:r:nh" OPTION; do
     case ${OPTION} in
         w)
             WORKSPACE=`readlink -f ${OPTARG}`
             ;;
+        b)
+	    check_valid_bsp ${OPTARG}
+	    ;;
+        e)
+            EXTRA_CONF=`readlink -f ${OPTARG}`
+            ;;
         n)
             DRYRUN="-n"
             ;;
+        r)
+            check_yn_rm_work ${OPTARG}
+            ;;
         h)
             help_info
             exit
@@ -51,39 +123,63 @@ while getopts "w:nh" OPTION; do
     esac
 done
 
-if [ -z ${WORKSPACE} ]; then
+if [ -z "${WORKSPACE}" ]; then
     echo_info "No workspace specified, a directory 'workspace' will be created in current directory as the workspace"
     WORKSPACE=`readlink -f workspace`
 fi
 
-SRC_WRL_DIR=${WORKSPACE}/src_wrl1018
+if [ -n "${BSP_VALID}" ]; then
+    BSP="${BSP_VALID}"
+fi
+
+# iso image is not supported by nxp-lx2xxx yet
+if [ "${BSP}" == "nxp-lx2xxx" ]; then
+    IMAGE_TYPE="tar.bz2"
+fi
+
+SRC_WRL_DIR=${WORKSPACE}/src_wrlinux
 SRC_ORAN_DIR=${WORKSPACE}/src_oran
 PRJ_BUILD_DIR=${WORKSPACE}/prj_oran-inf
 
 mkdir -p ${SRC_WRL_DIR} ${PRJ_BUILD_DIR} ${SRC_ORAN_DIR}
 
 echo_info "The following directories are created in your workspace(${WORKSPACE}):"
-echo_info "For wrlinux1018 source: ${SRC_WRL_DIR}"
+echo_info "For wrlinux source: ${SRC_WRL_DIR}"
 echo_info "For oran layer source: ${SRC_ORAN_DIR}"
 echo_info "For build project: ${PRJ_BUILD_DIR}"
 
-# Clone the source of WRLinux BASE 10.18 from github and setup
-RUN_CMD="git clone --branch WRLINUX_10_18_BASE git://github.com/WindRiver-Labs/wrlinux-x.git"
-echo_cmd "Cloning wrlinux 1018 source from github:"
+# Clone the source of WRLinux from github and setup
+RUN_CMD="git clone --branch ${SRC_WRL_BRANCH} ${SRC_WRL_URL}"
+echo_cmd "Cloning wrlinux-x source from github:"
 cd ${SRC_WRL_DIR}
 ${RUN_CMD}
 
-RUN_CMD="./wrlinux-x/setup.sh --machines intel-x86-64 --layers meta-cloud-services"
+RUN_CMD="./wrlinux-x/setup.sh --machines ${BSP} --layers meta-cloud-services"
 echo_cmd "Setup wrlinux build project:"
 ${RUN_CMD}
 
-# Clone extra layers
-echo_info "Cloning oran layer:"
+# Clone the oran layer if it's not already cloned
+# Check if the script is inside the repo
+if cd ${SCRIPTS_DIR} && git rev-parse --is-inside-work-tree > /dev/null 2>&1; then
+    CLONED_ORAN_REPO=`dirname ${SCRIPTS_DIR}`
+    echo_info "Use the cloned oran repo: ${CLONED_ORAN_REPO}"
+    mkdir ${SRC_ORAN_DIR}/rtp
+    cd ${SRC_ORAN_DIR}/rtp
+    ln -sf ${CLONED_ORAN_REPO}/meta-oran meta-oran
+    ln -sf ${CLONED_ORAN_REPO}/scripts scripts
+else
+    echo_info "Cloning oran layer:"
+    cd ${SRC_ORAN_DIR}
+    RUN_CMD="git clone --branch ${SRC_ORAN_BRANCH} https://gerrit.o-ran-sc.org/r/pti/rtp"
+    echo_cmd "Cloing with:"
+    ${RUN_CMD}
+fi
 
-cd ${SRC_ORAN_DIR}
-RUN_CMD="git clone https://gerrit.o-ran-sc.org/r/pti/rtp"
-echo_cmd "Cloing with:"
-${RUN_CMD}
+# Apply meta patches for nxp-lx2xxx
+if [ "${BSP}" == "nxp-lx2xxx" ]; then
+    cd ${SRC_WRL_DIR}/layers/nxp-lx2xxx/
+    git am ${SRC_ORAN_DIR}/rtp/scripts/meta-patches/nxp-lx2xxx/0001-Revert-nxp-lx2xxx-remove-preempt-rt-related-file.patch
+fi
 
 # Source the build env
 cd ${SRC_WRL_DIR}
@@ -91,9 +187,11 @@ cd ${SRC_WRL_DIR}
 set ${PRJ_BUILD_DIR}
 . ./oe-init-build-env ${PRJ_BUILD_DIR}
 
-# Add the meta-oran layer and required layers
+# Add the meta-oran layer
 cd ${PRJ_BUILD_DIR}
-bitbake-layers add-layer ${SRC_ORAN_DIR}/rtp/meta-oran
+RUN_CMD="bitbake-layers add-layer ${SRC_ORAN_DIR}/rtp/meta-oran"
+echo_cmd "Add the meta-oran layer into the build project"
+${RUN_CMD}
 
 # Add extra configs into local.conf
 cat << EOF >> conf/local.conf
@@ -102,9 +200,39 @@ cat << EOF >> conf/local.conf
 ########################
 DISTRO = "oran-inf"
 BB_NO_NETWORK = '0'
+
+# Work around for CI build
+IMAGE_INSTALL_remove = "ceph"
+
+# For container image
+WR_APP_CONTAINER_APP = "rt-tests"
+
+# Disable multilib fo nxp-lx2xxx
+MULTILIBS_nxp-lx2xxx = ""
+DEFAULTTUNE_virtclass-multilib-lib32_nxp-lx2xxx = ""
+
+# Add templates
+WRTEMPLATE += "${WRTEMPLATE_COMMON}"
+WRTEMPLATE_prepend_x86-64 += "${WRTEMPLATE_X86}"
 EOF
 
+if [ "${RM_WORK}" == "Yes" ]; then
+    echo "INHERIT += 'rm_work'" >> conf/local.conf
+fi
+
+if [ "${EXTRA_CONF}" != "" ] && [ -f "${EXTRA_CONF}" ]; then
+    cat ${EXTRA_CONF} >> conf/local.conf
+fi
+
 # Build the oran-inf-host image
 mkdir -p logs
 TIMESTAMP=`date +"%Y%m%d_%H%M%S"`
+RUN_CMD="bitbake ${DRYRUN} oran-image-inf-host"
+echo_cmd "Build the oran-image-inf-host image"
 bitbake ${DRYRUN} oran-image-inf-host 2>&1|tee logs/bitbake_oran-image-inf-host_${TIMESTAMP}.log
+
+RUN_CMD="bitbake ${DRYRUN} wr-app-container"
+echo_cmd "Build the wr-app-container image"
+bitbake ${DRYRUN} wr-app-container 2>&1|tee logs/bitbake_wr-app-container_${TIMESTAMP}.log
+
+echo_info "Build succeeded, you can get the image in ${PRJ_BUILD_DIR}/tmp-glibc/deploy/images/${BSP}/oran-image-inf-host-${BSP}.${IMAGE_TYPE}"