X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=scripts%2Fbuild_oran.sh;h=a8ac7781216d80faf7793a1c09a6c9d582b26919;hb=9e0c38e98908f38970af326a4cf8098bd09f665d;hp=fceb8fab22183c719f4d0d9e642ab88b5519bbe7;hpb=059dce1e019f9759790f27fb362b38d5262acc89;p=pti%2Frtp.git

diff --git a/scripts/build_oran.sh b/scripts/build_oran.sh
index fceb8fa..a8ac778 100755
--- a/scripts/build_oran.sh
+++ b/scripts/build_oran.sh
@@ -1,17 +1,44 @@
 #!/bin/bash
+#
+# Copyright (C) 2019 Wind River Systems, Inc.
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
 
 # Ensure we fail the job if any steps fail.
-set -eu -o pipefail
+set -e -o pipefail
+
+SUPPORTED_BSP="intel-x86-64 nxp-lx2xxx"
+WRTEMPLATE_COMMON="feature/oran-host-rt-tune feature/kubernetes feature/self-hosted"
+WRTEMPLATE_X86="feature/hosts-ia feature/kvm feature/dpdk"
+
+SRC_ORAN_BRANCH="master"
+SRC_WRL_BRANCH="WRLINUX_10_18_BASE"
+SRC_WRL_URL="git://github.com/WindRiver-Labs/wrlinux-x.git"
+
+SCRIPTS_DIR=$(dirname $(readlink -f $0))
 
 help_info () {
 cat << ENDHELP
 Usage:
-$(basename $0) <-w WORKSPACE_DIR> [-n] [-h]
+$(basename $0) <-w WORKSPACE_DIR> [-b BSP] [-n] [-h] [-r]
 where:
     -w WORKSPACE_DIR is the path for the project
+    -b BPS is one of supported BSP: "${SUPPORTED_BSP}"
+       (default is intel-x86-64 if not specified.)
     -n dry-run only for bitbake
     -h this help info
     -e EXTRA_CONF is the pat for extra config file
+    -r whether to inherit rm_work (default is Yes)
 ENDHELP
 }
 
@@ -35,23 +62,60 @@ if [ $# -eq 0 ]; then
     exit
 fi
 
+check_yn_rm_work () {
+    yn="$1"
+    case ${yn} in
+        [Yy]|[Yy]es)
+            RM_WORK="Yes"
+            ;;
+        [Nn]|[Nn]o)
+            RM_WORK="No"
+            ;;
+        *)
+            echo "Invalid arg for -r option."
+            help_info
+            exit 1
+            ;;
+    esac
+}
+
+check_valid_bsp () {
+    bsp="$1"
+    for b in ${SUPPORTED_BSP}; do
+        if [ "${bsp}" == "${b}" ]; then
+            BSP_VALID="${bsp}"
+            break
+        fi
+    done
+    if [ -z "${BSP_VALID}" ]; then
+        echo_error "${bsp} is not a supported BSP, the supported BSPs are: ${SUPPORTED_BSP}"
+        exit 1
+    fi
+}
+
 DRYRUN=""
 EXTRA_CONF=""
+RM_WORK="Yes"
+BSP="intel-x86-64"
+IMAGE_TYPE="iso"
 
-SCRIPTS_DIR=`dirname $0`
-SCRIPTS_DIR=`readlink -f $SCRIPTS_DIR`
-
-while getopts "w:e:nh" OPTION; do
+while getopts "w:b:e:r:nh" OPTION; do
     case ${OPTION} in
         w)
             WORKSPACE=`readlink -f ${OPTARG}`
             ;;
+        b)
+	    check_valid_bsp ${OPTARG}
+	    ;;
         e)
             EXTRA_CONF=`readlink -f ${OPTARG}`
-	    ;;
+            ;;
         n)
             DRYRUN="-n"
             ;;
+        r)
+            check_yn_rm_work ${OPTARG}
+            ;;
         h)
             help_info
             exit
@@ -59,29 +123,38 @@ while getopts "w:e:nh" OPTION; do
     esac
 done
 
-if [ -z ${WORKSPACE} ]; then
+if [ -z "${WORKSPACE}" ]; then
     echo_info "No workspace specified, a directory 'workspace' will be created in current directory as the workspace"
     WORKSPACE=`readlink -f workspace`
 fi
 
-SRC_WRL_DIR=${WORKSPACE}/src_wrl1018
+if [ -n "${BSP_VALID}" ]; then
+    BSP="${BSP_VALID}"
+fi
+
+# iso image is not supported by nxp-lx2xxx yet
+if [ "${BSP}" == "nxp-lx2xxx" ]; then
+    IMAGE_TYPE="tar.bz2"
+fi
+
+SRC_WRL_DIR=${WORKSPACE}/src_wrlinux
 SRC_ORAN_DIR=${WORKSPACE}/src_oran
 PRJ_BUILD_DIR=${WORKSPACE}/prj_oran-inf
 
 mkdir -p ${SRC_WRL_DIR} ${PRJ_BUILD_DIR} ${SRC_ORAN_DIR}
 
 echo_info "The following directories are created in your workspace(${WORKSPACE}):"
-echo_info "For wrlinux1018 source: ${SRC_WRL_DIR}"
+echo_info "For wrlinux source: ${SRC_WRL_DIR}"
 echo_info "For oran layer source: ${SRC_ORAN_DIR}"
 echo_info "For build project: ${PRJ_BUILD_DIR}"
 
-# Clone the source of WRLinux BASE 10.18 from github and setup
-RUN_CMD="git clone --branch WRLINUX_10_18_BASE git://github.com/WindRiver-Labs/wrlinux-x.git"
-echo_cmd "Cloning wrlinux 1018 source from github:"
+# Clone the source of WRLinux from github and setup
+RUN_CMD="git clone --branch ${SRC_WRL_BRANCH} ${SRC_WRL_URL}"
+echo_cmd "Cloning wrlinux-x source from github:"
 cd ${SRC_WRL_DIR}
 ${RUN_CMD}
 
-RUN_CMD="./wrlinux-x/setup.sh --machines intel-x86-64 --layers meta-cloud-services"
+RUN_CMD="./wrlinux-x/setup.sh --machines ${BSP} --layers meta-cloud-services"
 echo_cmd "Setup wrlinux build project:"
 ${RUN_CMD}
 
@@ -90,16 +163,24 @@ ${RUN_CMD}
 if cd ${SCRIPTS_DIR} && git rev-parse --is-inside-work-tree > /dev/null 2>&1; then
     CLONED_ORAN_REPO=`dirname ${SCRIPTS_DIR}`
     echo_info "Use the cloned oran repo: ${CLONED_ORAN_REPO}"
-    cd ${SRC_ORAN_DIR}
-    ln -sf ${CLONED_ORAN_REPO} rtp
+    mkdir ${SRC_ORAN_DIR}/rtp
+    cd ${SRC_ORAN_DIR}/rtp
+    ln -sf ${CLONED_ORAN_REPO}/meta-oran meta-oran
+    ln -sf ${CLONED_ORAN_REPO}/scripts scripts
 else
     echo_info "Cloning oran layer:"
     cd ${SRC_ORAN_DIR}
-    RUN_CMD="git clone https://gerrit.o-ran-sc.org/r/pti/rtp"
+    RUN_CMD="git clone --branch ${SRC_ORAN_BRANCH} https://gerrit.o-ran-sc.org/r/pti/rtp"
     echo_cmd "Cloing with:"
     ${RUN_CMD}
 fi
 
+# Apply meta patches for nxp-lx2xxx
+if [ "${BSP}" == "nxp-lx2xxx" ]; then
+    cd ${SRC_WRL_DIR}/layers/nxp-lx2xxx/
+    git am ${SRC_ORAN_DIR}/rtp/scripts/meta-patches/nxp-lx2xxx/0001-Revert-nxp-lx2xxx-remove-preempt-rt-related-file.patch
+fi
+
 # Source the build env
 cd ${SRC_WRL_DIR}
 . ./environment-setup-x86_64-wrlinuxsdk-linux
@@ -119,9 +200,26 @@ cat << EOF >> conf/local.conf
 ########################
 DISTRO = "oran-inf"
 BB_NO_NETWORK = '0'
-WRTEMPLATE += "feature/oran-host-rt-tune"
+
+# Work around for CI build
+IMAGE_INSTALL_remove = "ceph"
+
+# For container image
+WR_APP_CONTAINER_APP = "rt-tests"
+
+# Disable multilib fo nxp-lx2xxx
+MULTILIBS_nxp-lx2xxx = ""
+DEFAULTTUNE_virtclass-multilib-lib32_nxp-lx2xxx = ""
+
+# Add templates
+WRTEMPLATE += "${WRTEMPLATE_COMMON}"
+WRTEMPLATE_prepend_x86-64 += "${WRTEMPLATE_X86}"
 EOF
 
+if [ "${RM_WORK}" == "Yes" ]; then
+    echo "INHERIT += 'rm_work'" >> conf/local.conf
+fi
+
 if [ "${EXTRA_CONF}" != "" ] && [ -f "${EXTRA_CONF}" ]; then
     cat ${EXTRA_CONF} >> conf/local.conf
 fi
@@ -133,4 +231,8 @@ RUN_CMD="bitbake ${DRYRUN} oran-image-inf-host"
 echo_cmd "Build the oran-image-inf-host image"
 bitbake ${DRYRUN} oran-image-inf-host 2>&1|tee logs/bitbake_oran-image-inf-host_${TIMESTAMP}.log
 
-echo_info "Build succeeded, you can get the image in ${PRJ_BUILD_DIR}/tmp-glibc/deploy/images/intel-x86-64/oran-image-inf-host-intel-x86-64.iso"
+RUN_CMD="bitbake ${DRYRUN} wr-app-container"
+echo_cmd "Build the wr-app-container image"
+bitbake ${DRYRUN} wr-app-container 2>&1|tee logs/bitbake_wr-app-container_${TIMESTAMP}.log
+
+echo_info "Build succeeded, you can get the image in ${PRJ_BUILD_DIR}/tmp-glibc/deploy/images/${BSP}/oran-image-inf-host-${BSP}.${IMAGE_TYPE}"