X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=ntsimulator%2Fyang%2Fx-ran%2Fxran-alarm-id.yang;fp=ntsimulator%2Fyang%2Fx-ran%2Fxran-alarm-id.yang;h=f87fcea08c0291583cafd33043953aefd4baa50a;hb=1f1479ff8ce3a268acb7b70a32bb789d859a915b;hp=0000000000000000000000000000000000000000;hpb=34ec819462d5f81ceeb723e47467bf50a8454f34;p=sim%2Fo1-interface.git diff --git a/ntsimulator/yang/x-ran/xran-alarm-id.yang b/ntsimulator/yang/x-ran/xran-alarm-id.yang new file mode 100644 index 0000000..f87fcea --- /dev/null +++ b/ntsimulator/yang/x-ran/xran-alarm-id.yang @@ -0,0 +1,178 @@ +module xran-alarm-id { + yang-version 1.1; + namespace "urn:xran:alarms:1.0"; + prefix "xran-alarms"; + + organization "xRAN Forum"; + + contact + "www.xran.org"; + + description + "This module defines the alarm identities for the RU. + + Copyright 2018 the xRAN Forum. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the above disclaimer. + * Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the above disclaimer in the documentation + and/or other materials provided with the distribution. + * Neither the Members of the xRAN Forum nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission."; + + revision "2018-07-20" { + description + "version 1.0.0 - First release of the xRAN YANG M-Plane models. + + This version of the model supports v01.00 of the corrsponding xRAN + M-Plane Specification."; + reference "XRAN-FH.MP.0-v01.00"; + } + + typedef alarm-id { + type enumeration { + enum XRAN_HIGH_TEMP_ALARM { + value 1; + description "A temperature is higher than expected"; + } + enum XRAN_OVERHEATING_ALARM { + value 2; + description "A temperature is dangerously high"; + } + enum XRAN_AMBIENT_TEMP_ALARM { + value 3; + description "A temperature related alarm due to ambient temperature + value going outside the allowed ambient temperature range"; + } + enum XRAN_TEMP_TOO_LOW_ALARM { + value 4; + description "A temperature related alarm due to the temperature inside + the unit being too low"; + } + enum XRAN_BROKEN_FAN_ALARM { + value 5; + description "A broken fan"; + } + enum XRAN_FAN_NOT_DETECTED_ALARM { + value 6; + description "A fan not detected"; + } + enum XRAN_TUNING_ALARM { + value 7; + description "A tuning failure."; + } + enum XRAN_FILTER_ALARM { + value 8; + description "A faulty filter."; + } + enum XRAN_TX_QUALITY_ALARM { + value 9; + description "A transmission quality."; + } + enum XRAN_OVERVOLTAGE_ALARM { + value 10; + description "A RF overvoltage protection."; + } + enum XRAN_CONFIG_ALARM { + value 11; + description "A configuration failed."; + } + enum XRAN_CRITICAL_FILE_ALARM { + value 12; + description "A Critical file not found."; + } + enum XRAN_FILE_ALARM { + value 13; + description "A non-critical file not found."; + } + enum XRAN_CORRUPT_FILE_ALARM { + value 14; + description "A corrupt configuration file."; + } + enum XRAN_OPERATION_ALARM { + value 15; + description "A unit out of order."; + } + enum XRAN_NO_IDENTITY_ALARM { + value 16; + description "A unit cannot be identified."; + } + enum XRAN_NO_EXT_SYNC_SOURCE { + value 17; + description "An RU has no external sync source."; + } + enum XRAN_SYNC_ALARM { + value 18; + description "A unit is out of synchronization."; + } + enum XRAN_TX_OUT_OF_ORDER_ALARM { + value 19; + description "A TX path is not usable."; + } + enum XRAN_RX_OUT_OF_ORDER_ALARM { + value 20; + description "A RX path is not usable."; + } + enum XRAN_OPTICAL_BER_ALARM { + value 21; + description "An increased bit error rate on the optical link"; + } + enum XRAN_SELF_TEST_ALARM { + value 22; + description "A power-on self test"; + } + enum XRAN_FPGA_UPDATE_ALARM { + value 23; + description "An FPGA software update"; + } + enum XRAN_UNIT_BLOCKED_ALARM { + value 24; + description "A unit is blocked"; + } + enum XRAN_RESET_REQUEST_ALARM { + value 25; + description "A unit requires a reset"; + } + enum XRAN_POWER_SUPPLY_FAULTY { + value 26; + description "A power supply unit has a fault"; + } + enum XRAN_POWER_AMPLIFIER_FAULTY { + value 27; + description "A power amplifier unit has a fault"; + } + enum XRAN_C_U_PLANE_LOGICAL_CONNECTION_FAULTY { + value 28; + description "A C/U-plane logical connection has a fault"; + } + enum XRAN_TRANSCEIVER_FAULT { + value 29; + description "A transceiver unit has a fault"; + } + enum XRAN_INTERFACE_FAULT { + value 30; + description "An interface unit has a fault"; + } + } + description + "A typedef defining an enumerated list of XRAN alarms which corresponds to + the fault-id in the xran management plane specification."; + } +}