X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu3_100mhz%2Fconfig_file_o_du.dat;h=fabd8a0bd94bf7f119e554fb35e35bafa7672d7e;hb=70d9d920dd4e575f085f1f1a9050fefd1c10e127;hp=049aba453ebfbbc725b79733fce38aa37b4e7701;hpb=cef07f74965b1749dd909fc1322e211489fea2ea;p=o-du%2Fphy.git

diff --git a/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat b/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat
index 049aba4..fabd8a0 100644
--- a/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat
@@ -1,14 +1,28 @@
-#######################################################################
+#******************************************************************************
 #
-# <COPYRIGHT_TAG>
+#   Copyright (c) 2019 Intel.
 #
-#######################################################################
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+#******************************************************************************/
+
 
 # This is simple configuration file. Use '#' sign for comments
+instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
 appMode=0 # lls-CU(0) | RU(1)
 xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
-antNum=4 # Number of Antennas per CC (default: 4)
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
 
 ##Numerology
 mu=3 #mmWave 120Khz Sub Carrier Spacing
@@ -36,9 +50,23 @@ sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
 
 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
-ruMac=00:11:22:33:44:55  #RU VF for RU app
-#ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
+Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+ioCore=5
+# Eth 0
+duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
+duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
+ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
+
+# Eth 1
+duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
+duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
+ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
+
+maxFrameId=99 # set for compatibility with O-RU
 
 numSlots=40 #number of slots per IQ files
 antC0=./usecase/mu3_100mhz/ant_0.bin   #CC0
@@ -58,7 +86,7 @@ antC13=./usecase/mu3_100mhz/ant_13.bin #CC3
 antC14=./usecase/mu3_100mhz/ant_14.bin #CC3
 antC15=./usecase/mu3_100mhz/ant_15.bin #CC3
 
-rachEanble=0 # Enable (1)| disable (0) PRACH configuration
+rachEanble=1 # Enable (1)| disable (0) PRACH configuration
 prachConfigIndex=81
 
 ## control of IQ byte order
@@ -68,12 +96,15 @@ nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to
 ##Debug
 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
 
 CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
 c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
 u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
 
 ##RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
 Tadv_cp_dl=25 #in us  TODO: update per RU implementation
               #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages