X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu3_100mhz%2Fconfig_file_o_du.dat;h=64fb18e79c563291bc696eb8c01d08fee7f0b4d3;hb=2fbf70096f64af622da983e88c5a64e90ad9bdbd;hp=049aba453ebfbbc725b79733fce38aa37b4e7701;hpb=cef07f74965b1749dd909fc1322e211489fea2ea;p=o-du%2Fphy.git diff --git a/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat b/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat index 049aba4..64fb18e 100644 --- a/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat +++ b/fhi_lib/app/usecase/mu3_100mhz/config_file_o_du.dat @@ -1,14 +1,28 @@ -####################################################################### +#****************************************************************************** # -# +# Copyright (c) 2019 Intel. # -####################################################################### +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +#******************************************************************************/ + # This is simple configuration file. Use '#' sign for comments +instanceId=0 # 0,1,2,... in case more than 1 application started on the same system appMode=0 # lls-CU(0) | RU(1) xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12) -antNum=4 # Number of Antennas per CC (default: 4) +antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B ##Numerology mu=3 #mmWave 120Khz Sub Carrier Spacing @@ -36,10 +50,20 @@ sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) +Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec +Gps_Beta=0 + +ioCore=5 +systemCore=5 +pktProcCore=5 +pktAuxCore=5 +timingCore=6 llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF -ruMac=00:11:22:33:44:55 #RU VF for RU app +ruMac=00:11:22:33:44:55 # RU VF for RU app #ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump +maxFrameId=99 # set for compatibility with O-RU + numSlots=40 #number of slots per IQ files antC0=./usecase/mu3_100mhz/ant_0.bin #CC0 antC1=./usecase/mu3_100mhz/ant_1.bin #CC0 @@ -58,7 +82,7 @@ antC13=./usecase/mu3_100mhz/ant_13.bin #CC3 antC14=./usecase/mu3_100mhz/ant_14.bin #CC3 antC15=./usecase/mu3_100mhz/ant_15.bin #CC3 -rachEanble=0 # Enable (1)| disable (0) PRACH configuration +rachEanble=1 # Enable (1)| disable (0) PRACH configuration prachConfigIndex=81 ## control of IQ byte order @@ -68,12 +92,15 @@ nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to ##Debug debugStop=1 #stop app on 1pps boundary (gps_second % 30) debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary +bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled c_plane_vlan_tag=1 #VLAN Tag used for C-Plane u_plane_vlan_tag=2 #VLAN Tag used for U-Plane ##RU Settings +totalBFWeights=32 # Total number of Beamforming Weights on RU + Tadv_cp_dl=25 #in us TODO: update per RU implementation #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages