X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu1_100mhz%2Fconfig_file_o_du.dat;h=b93b6040121c7d6b06ac9477372da1189162ab92;hb=2fbf70096f64af622da983e88c5a64e90ad9bdbd;hp=c343ccfd5cbcf71ccb2e19cc76b53738e92ec302;hpb=cef07f74965b1749dd909fc1322e211489fea2ea;p=o-du%2Fphy.git

diff --git a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat b/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
index c343ccf..b93b604 100644
--- a/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
+++ b/fhi_lib/app/usecase/mu1_100mhz/config_file_o_du.dat
@@ -1,14 +1,28 @@
-#######################################################################
+#******************************************************************************
 #
-# <COPYRIGHT_TAG>
+#   Copyright (c) 2019 Intel.
 #
-#######################################################################
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+#******************************************************************************/
+
 
 # This is simple configuration file. Use '#' sign for comments
-appMode=0 # lls-CU(0) | RU(1)
-xranMode=0 # Category A  (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
-ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 4)
-antNum=4 # Number of Antennas per CC (default: 4)
+instanceId=0 # 0,1,2,... in case more than 1 application started on the same system
+appMode=0 # O-DU(0) | RU(1)
+xranMode=0 # Category A  (0) (precoder in O-DU) | Category B (1) (precoder in RU)
+ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
+antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B 
 
 ##Numerology
 mu=1 #30Khz Sub Carrier Spacing
@@ -23,7 +37,7 @@ nDLFftSize=4096
 nULFftSize=4096
 
 nFrameDuplexType=1 # 0 - FDD 1 - TDD
-nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it’s 6:4:4
+nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it's 6:4:4
 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
@@ -37,7 +51,14 @@ sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
 
 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single 
  #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
-
+Gps_Alpha=0	#alpha and beta value as in section 9.7.2 of ORAN spec
+Gps_Beta=0
+
+ioCore=5
+systemCore=5
+pktProcCore=5
+pktAuxCore=5
+timingCore=6
 llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
 ruMac=00:11:22:33:44:55    # RU VF for RU app
 #ruMac=3c:fd:fe:9e:93:68 #RU PF for tcpdump
@@ -61,6 +82,38 @@ antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
 antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
 
 rachEanble=1 # Enable (1)| disable (0) PRACH configuration
+prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
+
+###########################################################
+##Section Settings
+DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used 
+
+nPrbElemDl=8
+#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
+# weight base beams 
+PrbElemDl0=0,36,0,14,1,1,0,16,1
+PrbElemDl1=36,36,0,14,2,1,0,16,1
+PrbElemDl2=72,36,0,14,3,1,0,16,1
+PrbElemDl3=108,36,0,14,4,1,0,16,1
+PrbElemDl4=144,36,0,14,5,1,0,16,1
+PrbElemDl5=180,36,0,14,6,1,0,16,1
+PrbElemDl6=216,36,0,14,7,1,0,16,1
+PrbElemDl7=252,21,0,14,8,1,0,16,1
+
+
+nPrbElemUl=8
+#nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
+# weight base beams 
+PrbElemUl0=0,36,0,14,1,1,0,16,1
+PrbElemUl1=36,36,0,14,2,1,0,16,1
+PrbElemUl2=72,36,0,14,3,1,0,16,1
+PrbElemUl3=108,36,0,14,4,1,0,16,1
+PrbElemUl4=144,36,0,14,5,1,0,16,1
+PrbElemUl5=180,36,0,14,6,1,0,16,1
+PrbElemUl6=216,36,0,14,7,1,0,16,1
+PrbElemUl7=252,21,0,14,8,1,0,16,1
+
+###########################################################
 
 ## control of IQ byte order
 iqswap=0 #do swap of IQ before send buffer to eth
@@ -69,12 +122,13 @@ nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to
 ##Debug
 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
+bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
 
 CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
-c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
-u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
 
-##RU Settings
+##O-RU Settings
+totalBFWeights=32 # Total number of Beamforming Weights on RU
+
 Tadv_cp_dl=25 # in us
               # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
 #Reception Window C-plane DL
@@ -94,7 +148,7 @@ Ta3_min=20 # in us
 Ta3_max=32 # in us 
 
 ###########################################################
-##lls-CU Settings
+##O-DU Settings
 #C-plane
 #Transmission Window Fast C-plane DL
 T1a_min_cp_dl=285