X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=fhi_lib%2Fapp%2Fusecase%2Fmu0_20mhz%2Fconfig_file_o_ru.dat;fp=fhi_lib%2Fapp%2Fusecase%2Fmu0_20mhz%2Fconfig_file_o_ru.dat;h=0000000000000000000000000000000000000000;hb=2de97529a4c5a1922214ba0e6f0fb84cacbd0bc7;hp=d5b3d5d89e304df995a37eba9548e89af6d1f586;hpb=81a09690b36b3a4e89b4dae34f30933de13f7f90;p=o-du%2Fphy.git diff --git a/fhi_lib/app/usecase/mu0_20mhz/config_file_o_ru.dat b/fhi_lib/app/usecase/mu0_20mhz/config_file_o_ru.dat deleted file mode 100644 index d5b3d5d..0000000 --- a/fhi_lib/app/usecase/mu0_20mhz/config_file_o_ru.dat +++ /dev/null @@ -1,143 +0,0 @@ -#****************************************************************************** -# -# Copyright (c) 2019 Intel. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -#******************************************************************************/ - - -# This is simple configuration file. Use '#' sign for comments -instanceId=1 # 0,1,2,... in case more than 1 application started on the same system -appMode=1 # O-DU(0) | O-RU(1) -xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU) -ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12) -antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B - -##Numerology -mu=0 #15Khz Sub Carrier Spacing -ttiPeriod=1000 # in us TTI period (15Khz default 1000us) -nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000 -nDLBandwidth=20 #Carrier bandwidth for in MHz. Value: 5->400 -nULBandwidth=20 #Carrier bandwidth for in MHz. Value: 5->400 -nDLFftSize=2048 -nULFftSize=2048 - -nFrameDuplexType=0 # 0 - FDD 1 - TDD -nTddPeriod=0 #TDD priod e.g. DDDS 4 - -MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single - #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame) -Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec -Gps_Beta=0 - -ioCore=10 -# Eth 0 -duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF -ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app -duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF -ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app - -#Eth 1 -duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF -ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app -duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF -ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app - - -numSlots=40 #number of slots per IQ files -antC0=./usecase/mu0_20mhz/ant_0.bin #CC0 -antC1=./usecase/mu0_20mhz/ant_1.bin #CC0 -antC2=./usecase/mu0_20mhz/ant_2.bin #CC0 -antC3=./usecase/mu0_20mhz/ant_3.bin #CC0 -antC4=./usecase/mu0_20mhz/ant_4.bin #CC1 -antC5=./usecase/mu0_20mhz/ant_5.bin #CC1 -antC6=./usecase/mu0_20mhz/ant_6.bin #CC1 -antC7=./usecase/mu0_20mhz/ant_7.bin #CC1 -antC8=./usecase/mu0_20mhz/ant_8.bin #CC2 -antC9=./usecase/mu0_20mhz/ant_9.bin #CC2 -antC10=./usecase/mu0_20mhz/ant_10.bin #CC2 -antC11=./usecase/mu0_20mhz/ant_11.bin #CC2 -antC12=./usecase/mu0_20mhz/ant_12.bin #CC3 -antC13=./usecase/mu0_20mhz/ant_13.bin #CC3 -antC14=./usecase/mu0_20mhz/ant_14.bin #CC3 -antC15=./usecase/mu0_20mhz/ant_15.bin #CC3 - -## RACH TODO: update for PRACH -rachEanble=1 # Enable (1)| disable (0) PRACH configuration -#rachOffset=43 # RB offset for prach detection (see RIU spec) -prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index - -antPrachC0=./usecase/mu0_20mhz/ant_0.bin -antPrachC1=./usecase/mu0_20mhz/ant_1.bin -antPrachC2=./usecase/mu0_20mhz/ant_2.bin -antPrachC3=./usecase/mu0_20mhz/ant_3.bin - - -## control of IQ byte order -iqswap=0 #do swap of IQ before send buffer to eth -nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order - -##Debug -debugStop=1 #stop app on 1pps boundary (gps_second % 30) -debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary -bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode - -CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled -c_plane_vlan_tag=1 #VLAN Tag used for C-Plane -u_plane_vlan_tag=2 #VLAN Tag used for U-Plane - -##RU Settings -totalBFWeights=32 # Total number of Beamforming Weights on RU - -Tadv_cp_dl=25 #in us TODO: update per RU implementation - #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages - -#Reception Window C-plane DL -T2a_min_cp_dl=400 #in us -T2a_max_cp_dl=1120 #in us - -#Reception Window C-plane UL -T2a_min_cp_ul=400 #in us -T2a_max_cp_ul=1120 #in us - -#Reception Window U-plane -T2a_min_up=200 # in us -T2a_max_up=1120 # in us - -#Transmission Window -Ta3_min=160 #in us -Ta3_max=256 #in us - -########################################################### -##lls-CU Settings -#C-plane -#Transmission Window Fast C-plane DL -T1a_min_cp_dl=560 -T1a_max_cp_dl=800 - -##Transmission Window Fast C-plane UL -T1a_min_cp_ul=480 -T1a_max_cp_ul=560 - -#U-plane -##Transmission Window -T1a_min_up=280 -T1a_max_up=400 - -#Reception Window -Ta4_min=0 -Ta4_max=360 -########################################################### -