X-Git-Url: https://gerrit.o-ran-sc.org/r/gitweb?a=blobdiff_plain;f=XTesting%2Fkubespray%2Finventory%2Fsample%2Fgroup_vars%2Fk8s_cluster%2Fk8s-net-calico.yml;fp=XTesting%2Fkubespray%2Finventory%2Fsample%2Fgroup_vars%2Fk8s_cluster%2Fk8s-net-calico.yml;h=553e48b9877be8b8f1a1184a4e78553abdb37099;hb=31af17bb5935b722dcf59d5800aaff9e789cfa93;hp=0000000000000000000000000000000000000000;hpb=c8bda4f07b7e87beb2aa3d8729f9b0b456d4da6f;p=it%2Ftest.git

diff --git a/XTesting/kubespray/inventory/sample/group_vars/k8s_cluster/k8s-net-calico.yml b/XTesting/kubespray/inventory/sample/group_vars/k8s_cluster/k8s-net-calico.yml
new file mode 100644
index 0000000..553e48b
--- /dev/null
+++ b/XTesting/kubespray/inventory/sample/group_vars/k8s_cluster/k8s-net-calico.yml
@@ -0,0 +1,127 @@
+---
+# see roles/network_plugin/calico/defaults/main.yml
+
+# the default value of name
+calico_cni_name: k8s-pod-network
+
+## With calico it is possible to distributed routes with border routers of the datacenter.
+## Warning : enabling router peering will disable calico's default behavior ('node mesh').
+## The subnets of each nodes will be distributed by the datacenter router
+# peer_with_router: false
+
+# Enables Internet connectivity from containers
+# nat_outgoing: true
+
+# Enables Calico CNI "host-local" IPAM plugin
+# calico_ipam_host_local: true
+
+# add default ippool name
+# calico_pool_name: "default-pool"
+
+# add default ippool blockSize (defaults kube_network_node_prefix)
+calico_pool_blocksize: 26
+
+# add default ippool CIDR (must be inside kube_pods_subnet, defaults to kube_pods_subnet otherwise)
+# calico_pool_cidr: 1.2.3.4/5
+
+# add default ippool CIDR to CNI config
+# calico_cni_pool: true
+
+# Add default IPV6 IPPool CIDR. Must be inside kube_pods_subnet_ipv6. Defaults to kube_pods_subnet_ipv6 if not set.
+# calico_pool_cidr_ipv6: fd85:ee78:d8a6:8607::1:0000/112
+
+# Add default IPV6 IPPool CIDR to CNI config
+# calico_cni_pool_ipv6: true
+
+# Global as_num (/calico/bgp/v1/global/as_num)
+# global_as_num: "64512"
+
+# If doing peering with node-assigned asn where the globas does not match your nodes, you want this
+# to be true.  All other cases, false.
+# calico_no_global_as_num: false
+
+# You can set MTU value here. If left undefined or empty, it will
+# not be specified in calico CNI config, so Calico will use built-in
+# defaults. The value should be a number, not a string.
+# calico_mtu: 1500
+
+# Configure the MTU to use for workload interfaces and tunnels.
+# - If Wireguard is enabled, subtract 60 from your network MTU (i.e 1500-60=1440)
+# - Otherwise, if VXLAN or BPF mode is enabled, subtract 50 from your network MTU (i.e. 1500-50=1450)
+# - Otherwise, if IPIP is enabled, subtract 20 from your network MTU (i.e. 1500-20=1480)
+# - Otherwise, if not using any encapsulation, set to your network MTU (i.e. 1500)
+# calico_veth_mtu: 1440
+
+# Advertise Cluster IPs
+# calico_advertise_cluster_ips: true
+
+# Advertise Service External IPs
+# calico_advertise_service_external_ips:
+# - x.x.x.x/24
+# - y.y.y.y/32
+
+# Adveritse Service LoadBalancer IPs
+# calico_advertise_service_loadbalancer_ips:
+# - x.x.x.x/24
+# - y.y.y.y/16
+
+# Choose data store type for calico: "etcd" or "kdd" (kubernetes datastore)
+# calico_datastore: "kdd"
+
+# Choose Calico iptables backend: "Legacy", "Auto" or "NFT"
+# calico_iptables_backend: "Auto"
+
+# Use typha (only with kdd)
+# typha_enabled: false
+
+# Generate TLS certs for secure typha<->calico-node communication
+# typha_secure: false
+
+# Scaling typha: 1 replica per 100 nodes is adequate
+# Number of typha replicas
+# typha_replicas: 1
+
+# Set max typha connections
+# typha_max_connections_lower_limit: 300
+
+# Set calico network backend: "bird", "vxlan" or "none"
+# bird enable BGP routing, required for ipip and no encapsulation modes
+# calico_network_backend: vxlan
+
+# IP in IP and VXLAN is mutualy exclusive modes.
+# set IP in IP encapsulation mode: "Always", "CrossSubnet", "Never"
+# calico_ipip_mode: 'Never'
+
+# set VXLAN encapsulation mode: "Always", "CrossSubnet", "Never"
+# calico_vxlan_mode: 'Always'
+
+# set VXLAN port and VNI
+# calico_vxlan_vni: 4096
+# calico_vxlan_port: 4789
+
+# Cenable eBPF mode
+# calico_bpf_enabled: false
+
+# If you want to use non default IP_AUTODETECTION_METHOD, IP6_AUTODETECTION_METHOD for calico node set this option to one of:
+# * can-reach=DESTINATION
+# * interface=INTERFACE-REGEX
+# see https://docs.projectcalico.org/reference/node/configuration
+# calico_ip_auto_method: "interface=eth.*"
+# calico_ip6_auto_method: "interface=eth.*"
+
+# Choose the iptables insert mode for Calico: "Insert" or "Append".
+# calico_felix_chaininsertmode: Insert
+
+# If you want use the default route interface when you use multiple interface with dynamique route (iproute2)
+# see https://docs.projectcalico.org/reference/node/configuration : FELIX_DEVICEROUTESOURCEADDRESS
+# calico_use_default_route_src_ipaddr: false
+
+# Enable calico traffic encryption with wireguard
+# calico_wireguard_enabled: false
+
+# Under certain situations liveness and readiness probes may need tunning
+# calico_node_livenessprobe_timeout: 10
+# calico_node_readinessprobe_timeout: 10
+
+# Calico apiserver (only with kdd)
+# calico_apiserver_enabled: false