Mmemonic: rmr_api_static_test.c
Abstract: Specific tests related to the API functions in rmr_nng.c/rmr.c.
This should be included by a driver, but only the main RMr
- driver and there likely not be a specific stand alone driver
+ driver and there will likely not be a specific stand alone driver
for just this small set of tests because of the depth of the
library needed to test at this level.
+ This can be used for both the nng and nanomsg outward facing
+ RMr API functions.
+
The message buffer specific API tests are in a different static
module. API functions tested here are:
rmr_close
#include "../src/common/include/rmr.h"
#include "../src/common/include/rmr_agnostic.h"
-//#include "../src/common/src/ring_static.c"
/*
Send a 'burst' of messages to drive some send retry failures to increase RMr coverage
int state;
v = rmr_ready( NULL );
- errors += fail_if( v != 0, "rmr_ready returned true before initialisation" );
+ errors += fail_if( v != 0, "rmr_ready returned true before initialisation " );
if( (rmc = rmr_init( "4560", 1024, FL_NOTHREAD )) == NULL ) {
- fail_if_nil( rmc, "rmr_init returned a nil pointer" );
+ fail_if_nil( rmc, "rmr_init returned a nil pointer " );
return 1;
}
if( (rmc2 = rmr_init( ":6789", 1024, FL_NOTHREAD )) == NULL ) { // init without starting a thread
- errors += fail_if_nil( rmc, "rmr_init returned a nil pointer for non-threaded init" );
+ errors += fail_if_nil( rmc, "rmr_init returned a nil pointer for non-threaded init " );
}
free_ctx( rmc2 ); // coverage
if( (rmc2 = rmr_init( NULL, 1024, FL_NOTHREAD )) == NULL ) { // drive default port selector code
- errors += fail_if_nil( rmc, "rmr_init returned a nil pointer when driving for default port" );
+ errors += fail_if_nil( rmc, "rmr_init returned a nil pointer when driving for default port " );
}
v = rmr_ready( rmc ); // unknown return; not checking at the moment
msg = rmr_alloc_msg( NULL, 1024 ); // should return nil pointer
- errors += fail_not_nil( msg, "rmr_alloc_msg didn't return nil when given nil context" );
+ errors += fail_not_nil( msg, "rmr_alloc_msg didn't return nil when given nil context " );
msg = rmr_alloc_msg( rmc, 2048 ); // allocate larger than default size given on init
- errors += fail_if_nil( msg, "rmr_alloc_msg returned nil msg pointer" );
+ errors += fail_if_nil( msg, "rmr_alloc_msg returned nil msg pointer " );
v = rmr_payload_size( NULL );
- errors += fail_if( v >= 0, "rmr_payload_size returned valid size for nil message" );
- errors += fail_if( errno == 0, "rmr_payload_size did not set errno on failure" );
+ errors += fail_if( v >= 0, "rmr_payload_size returned valid size for nil message " );
+ errors += fail_if( errno == 0, "rmr_payload_size did not set errno on failure " );
v = rmr_payload_size( msg );
if( v >= 0 ) {
- errors += fail_not_equal( v, 2048, "rmr_payload_size returned invalid size (a) instead of expected size (b)" );
- errors += fail_if( errno != 0, "rmr_payload_size did not clear errno on success" );
+ errors += fail_not_equal( v, 2048, "rmr_payload_size returned invalid size (a) instead of expected size (b) " );
+ errors += fail_if( errno != 0, "rmr_payload_size did not clear errno on success " );
} else {
- errors += fail_if( v < 0, "rmr_payload_size returned invalid size for good message" );
+ errors += fail_if( v < 0, "rmr_payload_size returned invalid size for good message " );
}
+#ifdef EMULATE_NNG
+ // this is only supported in nng, so behavour is different depending on the underlying library being tested
+ v = rmr_get_rcvfd( NULL );
+ errors += fail_if( v >= 0, "rmr_get_rcvfd returned a valid file descriptor when given nil context " );
+ v = rmr_get_rcvfd( rmc );
+ errors += fail_if( v < 0, "rmr_get_rcvfd did not return a valid file descriptor " );
+#else
v = rmr_get_rcvfd( NULL );
- errors += fail_if( v >= 0, "rmr_get_rcvfd returned a valid file descriptor when given nil context" );
+ errors += fail_if( v >= 0, "rmr_get_rcvfd returned a valid file descriptor when given nil context " );
v = rmr_get_rcvfd( rmc );
- errors += fail_if( v < 0, "rmr_get_rcvfd did not return a valid file descriptor" );
+ errors += fail_if( v >= 0, "rmr_get_rcvfd returned a valid file descriptor (not supported in nanomsg)" );
+#endif
msg2 = rmr_send_msg( NULL, NULL ); // drive for coverage
- errors += fail_not_nil( msg2, "send_msg returned msg pointer when given a nil message and context" );
+ errors += fail_not_nil( msg2, "send_msg returned msg pointer when given a nil message and context " );
msg->state = 0;
msg = rmr_send_msg( NULL, msg );
- errors += fail_if( msg->state == 0, "rmr_send_msg did not set msg state when msg given with nil context" );
+ errors += fail_if( msg->state == 0, "rmr_send_msg did not set msg state when msg given with nil context " );
// --- sends will fail with a no endpoint error until a dummy route table is set, so we test fail case first.
msg->len = 100;
msg->state = 999;
errno = 999;
msg = rmr_send_msg( rmc, msg );
- errors += fail_if_nil( msg, "send_msg_ did not return a message on send" );
+ errors += fail_if_nil( msg, "send_msg_ did not return a message on send " );
if( msg ) {
- errors += fail_not_equal( msg->state, RMR_ERR_NOENDPT, "send_msg did not return no endpoints before rtable added" );
- errors += fail_if( errno == 0, "send_msg did not set errno" );
+ errors += fail_not_equal( msg->state, RMR_ERR_NOENDPT, "send_msg did not return no endpoints before rtable added " );
+ errors += fail_if( errno == 0, "send_msg did not set errno " );
}
gen_rt( rmc ); // --- after this point there is a dummy route table so send and rts calls should be ok
msg->state = 999;
errno = 999;
msg = rmr_send_msg( rmc, msg );
- errors += fail_if_nil( msg, "send_msg_ did not return a message on send" );
+ errors += fail_if_nil( msg, "send_msg_ did not return a message on send " );
if( msg ) {
- errors += fail_not_equal( msg->state, RMR_OK, "send_msg returned bad status for send that should work" );
- errors += fail_if( errno != 0, "send_msg set errno for send that should work" );
+ errors += fail_not_equal( msg->state, RMR_OK, "send_msg returned bad status for send that should work " );
+ errors += fail_if( errno != 0, "send_msg set errno for send that should work " );
v = rmr_payload_size( msg );
- errors += fail_if( v != 2048, "send_msg did not allocate new buffer with correct size" );
+ errors += fail_if( v != 2048, "send_msg did not allocate new buffer with correct size " );
}
rmr_set_stimeout( NULL, 0 );
rmr_set_rtimeout( rmc, -1 );
msg2 = rmr_rcv_msg( NULL, NULL );
- errors += fail_if( msg2 != NULL, "rmr_rcv_msg returned msg when given nil context and msg" );
+ errors += fail_if( msg2 != NULL, "rmr_rcv_msg returned msg when given nil context and msg " );
msg2 = rmr_rcv_msg( rmc, NULL );
- errors += fail_if( msg2 == NULL, "rmr_rcv_msg returned nil msg when given nil msg" );
+ errors += fail_if( msg2 == NULL, "rmr_rcv_msg returned nil msg when given nil msg " );
if( msg2 ) {
- errors += fail_not_equal( msg2->state, RMR_OK, "receive given nil message did not return msg with good state" );
+ if( msg2->state != RMR_ERR_EMPTY ) {
+ errors += fail_not_equal( msg2->state, RMR_OK, "receive given nil message did not return msg with good state (not empty) " );
+ }
+ //errors += fail_not_equal( msg2->state, RMR_OK, "receive given nil message did not return msg with good state " );
}
+
msg = rmr_rcv_msg( rmc, msg );
if( msg ) {
- errors += fail_if( msg->state != RMR_OK, "rmr_rcv_msg did not return an ok state" );
- errors += fail_not_equal( msg->len, 129, "rmr_rcv_msg returned message with invalid len" );
+ errors += fail_not_equal( msg->state, RMR_OK, "rmr_rcv_msg did not return an ok state " );
+ errors += fail_not_equal( msg->len, 220, "rmr_rcv_msg returned message with invalid len " );
} else {
- errors += fail_if_nil( msg, "rmr_rcv_msg returned a nil pointer" );
+ errors += fail_if_nil( msg, "rmr_rcv_msg returned a nil pointer " );
}
rmr_rts_msg( NULL, NULL ); // drive for coverage
rmr_rts_msg( rmc, NULL );
- errors += fail_if( errno == 0, "rmr_rts_msg did not set errno when given a nil message" );
+ errors += fail_if( errno == 0, "rmr_rts_msg did not set errno when given a nil message " );
msg->state = 0;
msg = rmr_rts_msg( NULL, msg ); // should set state in msg
- errors += fail_if_equal( msg->state, 0, "rmr_rts_msg did not set state when given valid message but no context" );
-
+ errors += fail_if_equal( msg->state, 0, "rmr_rts_msg did not set state when given valid message but no context " );
+
msg = rmr_rts_msg( rmc, msg ); // return the buffer to the sender
- errors += fail_if_nil( msg, "rmr_rts_msg did not return a message pointer" );
- errors += fail_if( errno != 0, "rmr_rts_msg did not reset errno" );
+ errors += fail_if_nil( msg, "rmr_rts_msg did not return a message pointer " );
+ errors += fail_if( errno != 0, "rmr_rts_msg did not reset errno " );
snprintf( msg->xaction, 17, "%015d", 16 ); // dummy transaction id (emulation generates, this should arrive after a few calls to recv)
msg->state = 0;
msg = rmr_call( NULL, msg );
- errors += fail_if( msg->state == 0, "rmr_call did not set message state when given message with nil context" );
+ errors += fail_if( msg->state == 0, "rmr_call did not set message state when given message with nil context " );
msg->mtype = 0;
msg = rmr_call( rmc, msg ); // this call should return a message as we can anticipate a dummy message in
- errors += fail_if_nil( msg, "rmr_call returned a nil message on call expected to succeed" );
+ errors += fail_if_nil( msg, "rmr_call returned a nil message on call expected to succeed " );
if( msg ) {
- errors += fail_not_equal( msg->state, RMR_OK, "rmr_call did not properly set state on successful return" );
- errors += fail_not_equal( errno, 0, "rmr_call did not properly set errno (a) on successful return" );
+ errors += fail_not_equal( msg->state, RMR_OK, "rmr_call did not properly set state on successful return " );
+ errors += fail_not_equal( errno, 0, "rmr_call did not properly set errno (a) on successful return " );
}
snprintf( wbuf, 17, "%015d", 14 ); // if we call receive we should find this in the first 15 tries
}
fprintf( stderr, "<INFO> msg: %s\n", msg->xaction );
} else {
- errors += fail_if_nil( msg, "receive returnd nil msg while looking for queued message" );
+ errors += fail_if_nil( msg, "receive returnd nil msg while looking for queued message " );
}
}
- errors += fail_if( i >= 16, "did not find expected message on queue" );
+ errors += fail_if( i >= 16, "did not find expected message on queue " );
if( ! msg ) {
msg = rmr_alloc_msg( rmc, 2048 ); // something buggered above; get a new one
}
msg = rmr_call( rmc, msg ); // make a call that we never expect a response on
- errors += fail_if_nil( msg, "rmr_call returned a non-nil message on call expected not to receive a response" );
+ errors += fail_if_nil( msg, "rmr_call returned a non-nil message on call expected not to receive a response " );
if( msg ) {
- errors += fail_if_equal( msg->state, RMR_OK, "rmr_call did not properly set state on queued message receive" );
- errors += fail_if( errno == 0, "rmr_call did not properly set errno on queued message receivesuccessful" );
+ errors += fail_if_equal( msg->state, RMR_OK, "rmr_call did not properly set state on queued message receive " );
+ errors += fail_if( errno == 0, "rmr_call did not properly set errno on queued message receivesuccessful " );
}
msg = rmr_call( rmc, msg ); // this should "timeout" because the message xaction id won't ever appear again
- errors += fail_if_nil( msg, "rmr_call returned a nil message on call expected to fail (but return a pointer)" );
- errors += fail_if( errno == 0, "rmr_call did not set errno on failure" );
+ errors += fail_if_nil( msg, "rmr_call returned a nil message on call expected to fail " );
+ errors += fail_if( errno == 0, "rmr_call did not set errno on failure " );
rmr_free_msg( NULL ); // drive for coverage; nothing to check
rmr_free_msg( msg2 );
msg2 = rmr_torcv_msg( NULL, NULL, 10 );
- errors += fail_not_nil( msg2, "rmr_torcv_msg returned a pointer when given nil information" );
+ errors += fail_not_nil( msg2, "rmr_torcv_msg returned a pointer when given nil information " );
msg2 = rmr_torcv_msg( rmc, NULL, 10 );
- errors += fail_if_nil( msg2, "rmr_torcv_msg did not return a message pointer when given a nil old msg" );
+ errors += fail_if_nil( msg2, "rmr_torcv_msg did not return a message pointer when given a nil old msg " );
// --- test timeout receive; our dummy epoll function will return 1 ready on first call and 0 ready (timeout emulation) on second
// however we must drain the swamp (queue) first, so run until we get a timeout error, or 20 and report error if we get to 20.
msg = NULL;
for( i = 0; i < 40; i++ ) {
msg = rmr_torcv_msg( rmc, msg, 10 );
- errors += fail_if_nil( msg, "torcv_msg returned nil msg when message expected" );
+ errors += fail_if_nil( msg, "torcv_msg returned nil msg when message expected " );
if( msg ) {
- if( msg->state == RMR_ERR_TIMEOUT ) { // queue drained and we've seen both states from poll if we get a timeout
+ if( msg->state == RMR_ERR_TIMEOUT || msg->state == RMR_ERR_EMPTY ) { // queue drained and we've seen both states from poll if we get a timeout
break;
}
}
}
- errors += fail_if( i >= 40, "torcv_msg never returned a timeout" );
+ errors += fail_if( i >= 40, "torcv_msg never returned a timeout " );
// ---- trace things that are not a part of the mbuf_api functions and thus must be tested here
state = rmr_init_trace( NULL, 37 ); // coverage test nil context
- errors += fail_not_equal( state, 0, "attempt to initialise trace with nil context returned non-zero state (a)" );
- errors += fail_if_equal( errno, 0, "attempt to initialise trace with nil context did not set errno as expected" );
+ errors += fail_not_equal( state, 0, "attempt to initialise trace with nil context returned non-zero state (a) " );
+ errors += fail_if_equal( errno, 0, "attempt to initialise trace with nil context did not set errno as expected " );
state = rmr_init_trace( rmc, 37 );
- errors += fail_if_equal( state, 0, "attempt to set trace len in context was not successful" );
- errors += fail_not_equal( errno, 0, "attempt to set trace len in context did not clear errno" );
+ errors += fail_if_equal( state, 0, "attempt to set trace len in context was not successful " );
+ errors += fail_not_equal( errno, 0, "attempt to set trace len in context did not clear errno " );
msg = rmr_tralloc_msg( rmc, 1024, 17, "1904308620110417" );
- errors += fail_if_nil( msg, "attempt to allocate message with trace data returned nil message" );
+ errors += fail_if_nil( msg, "attempt to allocate message with trace data returned nil message " );
state = rmr_get_trace( msg, wbuf, 17 );
- errors += fail_not_equal( state, 17, "len of trace data (a) returned after msg allocation was not expected size (b)" );
+ errors += fail_not_equal( state, 17, "len of trace data (a) returned after msg allocation was not expected size (b) " );
state = strcmp( wbuf, "1904308620110417" );
- errors += fail_not_equal( state, 0, "trace data returned after tralloc was not correct" );
+ errors += fail_not_equal( state, 0, "trace data returned after tralloc was not correct " );
em_send_failures = 1;
send_n_msgs( rmc, 30 ); // send 30 messages with emulation failures
Code Review / ric-plt / lib / rmr.git / blobdiff