# Create a log dir for the test case
mkdir -p $TESTLOGS/$ATC
+# Save create for current logs
+mkdir -p $TESTLOGS/$ATC/previous
+
+rm $TESTLOGS/$ATC/previous/*.log &> /dev/null
+rm $TESTLOGS/$ATC/previous/*.txt &> /dev/null
+rm $TESTLOGS/$ATC/previous/*.json &> /dev/null
+
+mv $TESTLOGS/$ATC/*.log $TESTLOGS/$ATC/previous &> /dev/null
+mv $TESTLOGS/$ATC/*.txt $TESTLOGS/$ATC/previous &> /dev/null
+mv $TESTLOGS/$ATC/*.txt $TESTLOGS/$ATC/previous &> /dev/null
+
# Clear the log dir for the test case
rm $TESTLOGS/$ATC/*.log &> /dev/null
rm $TESTLOGS/$ATC/*.txt &> /dev/null
DEVIATION_FILE=".tmp_deviations"
rm $DEVIATION_FILE &> /dev/null
+
+# Trap "command not found" and make the script fail
+trap_fnc() {
+
+ if [ $? -eq 127 ]; then
+ echo -e $RED"Function not found, set script to FAIL"$ERED
+ ((RES_CONF_FAIL++))
+ fi
+}
+trap trap_fnc ERR
+
+# Counter for tests
+TEST_SEQUENCE_NR=1
+
+__log_test_start() {
+ TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
+ echo -e $BOLD"TEST $TEST_SEQUENCE_NR (${BASH_LINENO[1]}): ${FUNCNAME[1]}" $@ $EBOLD
+ echo "TEST $TEST_SEQUENCE_NR - ${TIMESTAMP}: (${BASH_LINENO[1]}): ${FUNCNAME[1]}" $@ >> $HTTPLOG
+ ((RES_TEST++))
+ ((TEST_SEQUENCE_NR++))
+}
+
+__log_test_fail_general() {
+ echo -e $RED" FAIL."$1 $ERED
+ ((RES_FAIL++))
+ __check_stop_at_error
+}
+
+__log_test_fail_status_code() {
+ echo -e $RED" FAIL. Exepected status "$1", got "$2 $3 $ERED
+ ((RES_FAIL++))
+ __check_stop_at_error
+}
+
+__log_test_fail_body() {
+ echo -e $RED" FAIL, returned body not correct"$ERED
+ ((RES_FAIL++))
+ __check_stop_at_error
+}
+
+__log_test_fail_not_supported() {
+ echo -e $RED" FAIL, function not supported"$ERED
+ ((RES_FAIL++))
+ __check_stop_at_error
+}
+
+__log_test_pass() {
+ if [ $# -gt 0 ]; then
+ echo $@
+ fi
+ ((RES_PASS++))
+ echo -e $GREEN" PASS"$EGREEN
+}
+
+#Counter for configurations
+CONF_SEQUENCE_NR=1
+__log_conf_start() {
+ TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
+ echo -e $BOLD"CONF $CONF_SEQUENCE_NR (${BASH_LINENO[1]}): "${FUNCNAME[1]} $@ $EBOLD
+ echo "CONF $CONF_SEQUENCE_NR - ${TIMESTAMP}: (${BASH_LINENO[1]}): "${FUNCNAME[1]} $@ >> $HTTPLOG
+ ((CONF_SEQUENCE_NR++))
+}
+
+__log_conf_fail_general() {
+ echo -e $RED" FAIL."$1 $ERED
+ ((RES_CONF_FAIL++))
+ __check_stop_at_error
+}
+
+__log_conf_fail_status_code() {
+ echo -e $RED" FAIL. Exepected status "$1", got "$2 $3 $ERED
+ ((RES_CONF_FAIL++))
+ __check_stop_at_error
+}
+
+__log_conf_fail_body() {
+ echo -e $RED" FAIL, returned body not correct"$ERED
+ ((RES_CONF_FAIL++))
+ __check_stop_at_error
+}
+
+__log_conf_ok() {
+ if [ $# -gt 0 ]; then
+ echo $@
+ fi
+ echo -e $GREEN" OK"$EGREEN
+}
+
#Var for measuring execution time
TCTEST_START=$SECONDS
if [ -f "$TEST_ENV_VAR_FILE" ]; then
echo -e $BOLD"Sourcing env vars from: "$TEST_ENV_VAR_FILE$EBOLD
. $TEST_ENV_VAR_FILE
+
+ if [ -z "$TEST_ENV_PROFILE" ] || [ -z "$SUPPORTED_PROFILES" ]; then
+ echo -e $YELLOW"This test case may no work with selected test env file. TEST_ENV_PROFILE is missing in test_env file or SUPPORTED_PROFILES is missing in test case file"$EYELLOW
+ else
+ if [[ "$SUPPORTED_PROFILES" == *"$TEST_ENV_PROFILE"* ]]; then
+ echo -e $GREEN"Test case support the selected test env file"$EGREEN
+ else
+ echo -e $RED"Test case does not support the selected test env file"$ERED
+ echo -e $RED"Exiting...."$ERED
+ exit 1
+ fi
+ fi
else
echo -e $RED"Selected env var file does not exist: "$TEST_ENV_VAR_FILE$ERED
echo " Select one of following env var file matching the intended target of the test"
G1_A1_VERSION=""
G2_A1_VERSION=""
G3_A1_VERSION=""
+G4_A1_VERSION=""
+G5_A1_VERSION=""
G1_COUNT=0
G2_COUNT=0
G3_COUNT=0
+G4_COUNT=0
+G5_COUNT=0
# Vars to switch between http and https. Extra curl flag needed for https
export RIC_SIM_HTTPX="http"
export CR_HTTPX="http"
export CR_PORT=$CR_INTERNAL_PORT
export CR_LOCAL_PORT=$CR_EXTERNAL_PORT #When CR is running outside the docker net
+export CR_PATH="$CR_HTTPX://$CR_APP_NAME:$CR_PORT$CR_APP_CALLBACK"
export PROD_STUB_HTTPX="http"
export PROD_STUB_PORT=$PROD_STUB_INTERNAL_PORT
cd $curdir
cd ../mrstub
echo " Building mrstub image: $MRSTUB_LOCAL_IMAGE:$MRSTUB_LOCAL_IMAGE_TAG"
- docker build -t $MRSTUB_LOCAL_IMAGE . &> .dockererr
+ docker build --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $MRSTUB_LOCAL_IMAGE . &> .dockererr
if [ $? -eq 0 ]; then
echo -e $GREEN" Build Ok"$EGREEN
else
echo -e $RED" Build Failed"$ERED
((RES_CONF_FAIL++))
cat .dockererr
+ echo -e $RED"Exiting...."$ERED
+ exit 1
fi
cd $curdir
else
if [ $? -eq 0 ]; then
cd ../cr
echo " Building Callback Receiver image: $CR_LOCAL_IMAGE:$CR_IMAGE_TAG"
- docker build -t $CR_LOCAL_IMAGE . &> .dockererr
+ docker build --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $CR_LOCAL_IMAGE . &> .dockererr
if [ $? -eq 0 ]; then
echo -e $GREEN" Build Ok"$EGREEN
else
echo -e $RED" Build Failed"$ERED
((RES_CONF_FAIL++))
cat .dockererr
+ echo -e $RED"Exiting...."$ERED
+ exit 1
fi
cd $curdir
else
if [ $? -eq 0 ]; then
cd ../prodstub
echo " Building Producer stub image: $PROD_STUB_LOCAL_IMAGE:$PROD_STUB_LOCAL_IMAGE_TAG"
- docker build -t $PROD_STUB_LOCAL_IMAGE . &> .dockererr
+ docker build --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $PROD_STUB_LOCAL_IMAGE . &> .dockererr
if [ $? -eq 0 ]; then
echo -e $GREEN" Build Ok"$EGREEN
else
echo -e $RED" Build Failed"$ERED
((RES_CONF_FAIL++))
cat .dockererr
+ echo -e $RED"Exiting...."$ERED
+ exit 1
fi
cd $curdir
else
echo "-------------------------------------------------------------------------------------------------"
echo "-- Description: "$TC_ONELINE_DESCR
echo "-- Execution time: " $duration " seconds"
+ echo "-- Used env file: "$TEST_ENV_VAR_FILE
echo "-------------------------------------------------------------------------------------------------"
echo "------------------------------------- RESULTS"
echo ""
if [ $? -eq 0 ]; then
if [ $CONTRS -ne 0 ]; then
echo -e $RED"Containers running, may cause distubance to the test case"$ERED
- docker ps -a
+ docker ps -a | indent1
+ echo ""
fi
fi
}
if [ $# -gt 1 ]; then
echo -e $RED" Got: "${FUNCNAME[1]} ${@:2} $ERED
fi
+ ((RES_CONF_FAIL++))
}
((RES_CONF_FAIL++))
echo ""
echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
- return 1
+ echo -e $RED" Stopping script..."$ERED
+ exit 1
fi
if [ $localport -eq 0 ]; then
while [ $localport -eq 0 ]; do
else
TS_TMP=$SECONDS
while [ $(($TS_TMP+$i)) -gt $SECONDS ]; do
- echo -ne " Waiting for container ${appname} service status...retrying in $(($TS_TMP+$i-$SECONDS)) seconds ${SAMELINE}"
+ echo -ne " Waiting for container ${appname} service status...$(($SECONDS-$TSTART)) seconds, retrying in $(($TS_TMP+$i-$SECONDS)) seconds ${SAMELINE}"
sleep 1
done
fi
if [ "$pa_st" = "false" ]; then
((RES_CONF_FAIL++))
- echo -e $RED" Container ${appname} did not respond to service status"$ERED
+ echo -e $RED" Container ${appname} did not respond to service status in $(($SECONDS-$TSTART)) seconds"$ERED
return 0
fi
if [ $? -ne 0 ]; then
echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
cat .dockererr
+ echo -e $RED"Stopping script...."$ERED
+ exit 1
fi
elif [ "$2" == "STANDALONE" ]; then
echo "Skipping docker-compose"
if [ $? -ne 0 ]; then
echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
cat .dockererr
+ echo -e $RED"Stopping script...."$ERED
+ exit 1
fi
fi
app_prefix=""
###########################
use_simulator_http() {
- echo -e "Using $BOLD http $EBOLD towards the simulators"
+ echo -e $BOLD"RICSIM protocol setting"$EBOLD
+ echo -e " Using $BOLD http $EBOLD towards the simulators"
export RIC_SIM_HTTPX="http"
export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
}
use_simulator_https() {
- echo -e "Using $BOLD https $EBOLD towards the simulators"
+ echo -e $BOLD"RICSIM protocol setting"$EBOLD
+ echo -e " Using $BOLD https $EBOLD towards the simulators"
export RIC_SIM_HTTPX="https"
export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
export RIC_SIM_PORT=$RIC_SIM_INTERNAL_SECURE_PORT
echo ""
}
-# Start one group (ricsim_g1, ricsim_g2 or ricsim_g3) with a number of RIC Simulators using a given A interface
+# Start one group (ricsim_g1, ricsim_g2 .. ricsim_g5) with a number of RIC Simulators using a given A interface
# 'ricsim' may be set on command line to other prefix
-# args: ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id>
+# args: ricsim_g1|ricsim_g2|ricsim_g3|ricsim_g4|ricsim_g5 <count> <interface-id>
# (Function for test scripts)
start_ric_simulators() {
RIC1=$RIC_SIM_PREFIX"_g1"
RIC2=$RIC_SIM_PREFIX"_g2"
RIC3=$RIC_SIM_PREFIX"_g3"
+ RIC4=$RIC_SIM_PREFIX"_g4"
+ RIC5=$RIC_SIM_PREFIX"_g5"
if [ $# != 3 ]; then
((RES_CONF_FAIL++))
- __print_err "need three args, $RIC1|$RIC2|$RIC3 <count> <interface-id>" $@
+ __print_err "need three args, $RIC1|$RIC2|$RIC3|$RIC4|$RIC5 <count> <interface-id>" $@
exit 1
fi
echo " $2 simulators using basename: $1 on interface: $3"
elif [ $1 == "$RIC3" ]; then
G3_COUNT=$2
G3_A1_VERSION=$3
+ elif [ $1 == "$RIC4" ]; then
+ G4_COUNT=$2
+ G4_A1_VERSION=$3
+ elif [ $1 == "$RIC5" ]; then
+ G5_COUNT=$2
+ G5_A1_VERSION=$3
else
((RES_CONF_FAIL++))
- __print_err "need three args, $RIC1|$RIC2|$RIC3 <count> <interface-id>" $@
+ __print_err "need three args, $RIC1|$RIC2|$RIC3|$RIC4|$RIC5 <count> <interface-id>" $@
exit 1
fi
export G1_A1_VERSION
export G2_A1_VERSION
export G3_A1_VERSION
+ export G4_A1_VERSION
+ export G5_A1_VERSION
- docker_args="--scale g1=$G1_COUNT --scale g2=$G2_COUNT --scale g3=$G3_COUNT"
+ docker_args="--scale g1=$G1_COUNT --scale g2=$G2_COUNT --scale g3=$G3_COUNT --scale g4=$G4_COUNT --scale g5=$G5_COUNT"
app_data=""
cntr=1
while [ $cntr -le $2 ]; do
}
use_sdnc_http() {
- echo -e "Using $BOLD http $EBOLD towards SDNC"
+ echo -e $BOLD"SDNC protocol setting"$EBOLD
+ echo -e " Using $BOLD http $EBOLD towards SDNC"
export SDNC_HTTPX="http"
export SDNC_PORT=$SDNC_INTERNAL_PORT
export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT
}
use_sdnc_https() {
- echo -e "Using $BOLD https $EBOLD towards SDNC"
+ echo -e $BOLD"SDNC protocol setting"$EBOLD
+ echo -e " Using $BOLD https $EBOLD towards SDNC"
export SDNC_HTTPX="https"
export SDNC_PORT=$SDNC_INTERNAL_SECURE_PORT
export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_SECURE_PORT
}
use_mr_http() {
- echo -e "Using $BOLD http $EBOLD towards MR"
+ echo -e $BOLD"MR protocol setting"$EBOLD
+ echo -e " Using $BOLD http $EBOLD towards MR"
export MR_HTTPX="http"
export MR_PORT=$MR_INTERNAL_PORT
export MR_LOCAL_PORT=$MR_EXTERNAL_PORT
}
use_mr_https() {
- echo -e "Using $BOLD https $EBOLD towards MR"
+ echo -e $BOLD"MR protocol setting"$EBOLD
+ echo -e " Using $BOLD https $EBOLD towards MR"
export MR_HTTPX="https"
export MR_PORT=$MR_INTERNAL_SECURE_PORT
export MR_LOCAL_PORT=$MR_EXTERNAL_SECURE_PORT
}
use_cr_http() {
- echo -e "Using $BOLD http $EBOLD towards CR"
+ echo -e $BOLD"CR protocol setting"$EBOLD
+ echo -e " Using $BOLD http $EBOLD towards CR"
export CR_HTTPX="http"
export CR_PORT=$CR_INTERNAL_PORT
export CR_LOCAL_PORT=$CR_EXTERNAL_PORT
+ export CR_PATH="$CR_HTTPX://$CR_APP_NAME:$CR_PORT$CR_APP_CALLBACK"
echo ""
}
use_cr_https() {
- echo -e "Using $BOLD https $EBOLD towards CR"
+ echo -e $BOLD"CR protocol setting"$EBOLD
+ echo -e " Using $BOLD https $EBOLD towards CR"
export CR_HTTPX="https"
export CR_PORT=$CR_INTERNAL_SECURE_PORT
export CR_LOCAL_PORT=$CR_EXTERNAL_SECURE_PORT
+ export CR_PATH="$CR_HTTPX://$CR_APP_NAME:$CR_PORT$CR_APP_CALLBACK"
echo ""
}
}
use_prod_stub_http() {
- echo -e "Using $BOLD http $EBOLD towards Producer stub"
+ echo -e $BOLD"Producer stub protocol setting"$EBOLD
+ echo -e " Using $BOLD http $EBOLD towards Producer stub"
export PROD_STUB_HTTPX="http"
export PROD_STUB_PORT=$PROD_STUB_INTERNAL_PORT
export PROD_STUB_LOCAL_PORT=$PROD_STUB_EXTERNAL_PORT
}
use_prod_stub_https() {
- echo -e "Using $BOLD https $EBOLD towards Producer stub"
+ echo -e $BOLD"Producer stub protocol setting"$EBOLD
+ echo -e " Using $BOLD https $EBOLD towards Producer stub"
export PROD_STUB_HTTPX="https"
export PROD_STUB_PORT=$PROD_STUB_INTERNAL_SECURE_PORT
export PROD_STUB_LOCAL_PORT=$PROD_STUB_EXTERNAL_SECURE_PORT
# args: -
# (Function for test scripts)
use_agent_rest_http() {
- echo -e "Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards the agent"
+ echo -e $BOLD"Agent protocol setting"$EBOLD
+ echo -e " Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards the agent"
export ADAPTER=$RESTBASE
echo ""
}
# args: -
# (Function for test scripts)
use_agent_rest_https() {
- echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent"
+ echo -e $BOLD"Agent protocol setting"$EBOLD
+ echo -e " Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent"
export ADAPTER=$RESTBASE_SECURE
echo ""
return 0
# args: -
# (Function for test scripts)
use_agent_dmaap_http() {
- echo -e "Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
+ echo -e $BOLD"Agent dmaap protocol setting"$EBOLD
+ echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
export ADAPTER=$DMAAPBASE
echo ""
return 0
# args: -
# (Function for test scripts)
use_agent_dmaap_https() {
- echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent"
+ echo -e $BOLD"Agent dmaap protocol setting"$EBOLD
+ echo -e " Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
export ADAPTER=$DMAAPBASE_SECURE
echo ""
return 0
# args: -
# (Function for test scripts)
set_agent_debug() {
- echo -e $BOLD"Setting agent debug"$EBOLD
+ echo -e $BOLD"Setting agent debug logging"$EBOLD
actuator="/actuator/loggers/org.oransc.policyagent"
if [[ $POLICY_AGENT_IMAGE = *"onap"* ]]; then
actuator="/actuator/loggers/org.onap.ccsdk.oran.a1policymanagementservice"
# args: -
# (Function for test scripts)
set_agent_trace() {
- echo -e $BOLD"Setting agent trace"$EBOLD
+ echo -e $BOLD"Setting agent trace logging"$EBOLD
actuator="/actuator/loggers/org.oransc.policyagent"
if [[ $POLICY_AGENT_IMAGE = *"onap"* ]]; then
actuator="/actuator/loggers/org.onap.ccsdk.oran.a1policymanagementservice"
start_ecs() {
echo -e $BOLD"Starting ECS"$EBOLD
+
+ curdir=$PWD
+ cd $SIM_GROUP
+ cd ecs
+ cd $ECS_HOST_MNT_DIR
+ if [ -d database ]; then
+ if [ "$(ls -A $DIR)" ]; then
+ echo -e $BOLD" Cleaning files in mounted dir: $PWD/database"$EBOLD
+ rm -rf database/* &> /dev/null
+ if [ $? -ne 0 ]; then
+ echo -e $RED" Cannot remove database files in: $PWD"$ERED
+ exit 1
+ fi
+ fi
+ else
+ echo " No files in mounted dir or dir does not exists"
+ fi
+ cd $curdir
+
__check_included_image 'ECS'
if [ $? -eq 1 ]; then
echo -e $RED"The ECS image has not been checked for this test run due to arg to the test script"$ERED
__start_container ecs NODOCKERARGS $ECS_APP_NAME $ECS_EXTERNAL_PORT "/status" "http"
}
+# Restart ECS
+# args: -
+# (Function for test scripts)
+restart_ecs() {
+ echo -e $BOLD"Re-starting ECS"$EBOLD
+ docker restart $ECS_APP_NAME &> ./tmp/.dockererr
+ if [ $? -ne 0 ]; then
+ __print_err "Could restart $ECS_APP_NAME" $@
+ cat ./tmp/.dockererr
+ ((RES_CONF_FAIL++))
+ return 1
+ fi
+
+ __check_container_start $ECS_APP_NAME $ECS_EXTERNAL_PORT "/status" "http"
+ echo ""
+ return 0
+}
+
# All calls to ECS will be directed to the ECS REST interface from now on
# args: -
# (Function for test scripts)
use_ecs_rest_http() {
- echo -e "Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards ECS"
+ echo -e $BOLD"ECS protocol setting"$EBOLD
+ echo -e " Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards ECS"
export ECS_ADAPTER=$ECS_RESTBASE
echo ""
}
# args: -
# (Function for test scripts)
use_ecs_rest_https() {
- echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
+ echo -e $BOLD"ECS protocol setting"$EBOLD
+ echo -e " Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
export ECS_ADAPTER=$ECS_RESTBASE_SECURE
echo ""
return 0
# args: -
# (Function for test scripts)
use_ecs_dmaap_http() {
- echo -e "Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards ECS"
+ echo -e $BOLD"ECS dmaap protocol setting"$EBOLD
+ echo -e $RED" - NOT SUPPORTED - "$ERED
+ echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards ECS"
export ECS_ADAPTER=$ECS_DMAAPBASE
echo ""
return 0
# args: -
# (Function for test scripts)
use_ecs_dmaap_https() {
- echo -e "Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
+ echo -e $BOLD"RICSIM protocol setting"$EBOLD
+ echo -e $RED" - NOT SUPPORTED - "$ERED
+ echo -e " Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards ECS"
export ECS_ADAPTER=$ECS_DMAAPBASE_SECURE
echo ""
return 0
# args: -
# (Function for test scripts)
set_ecs_debug() {
- echo -e $BOLD"Setting ecs debug"$EBOLD
+ echo -e $BOLD"Setting ecs debug logging"$EBOLD
curlString="$LOCALHOST$ECS_EXTERNAL_PORT/actuator/loggers/org.oransc.enrichment -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
result=$(__do_curl "$curlString")
if [ $? -ne 0 ]; then
# args: -
# (Function for test scripts)
set_ecs_trace() {
- echo -e $BOLD"Setting ecs trace"$EBOLD
+ echo -e $BOLD"Setting ecs trace logging"$EBOLD
curlString="$LOCALHOST$ECS_EXTERNAL_PORT/actuator/loggers/org.oransc.enrichment -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
result=$(__do_curl "$curlString")
if [ $? -ne 0 ]; then
__print_err "need one arg, <file-prefix>" $@
exit 1
fi
- echo -e $BOLD"Storing all container logs using prefix: "$1$EBOLD
+ echo -e $BOLD"Storing all container logs in $TESTLOGS/$ATC using prefix: "$1$EBOLD
docker stats --no-stream > $TESTLOGS/$ATC/$1_docker_stats.log 2>&1
echo "<no-response-from-server>"
return 1
else
- echo "X2" >> $HTTPLOG
return 0
fi
else
checkjsonarraycount=1
fi
- echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
+ echo -e $BOLD"TEST $TEST_SEQUENCE_NR (${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
((RES_TEST++))
+ ((TEST_SEQUENCE_NR++))
start=$SECONDS
ctr=0
for (( ; ; )); do
checkjsonarraycount=1
fi
- echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}"$EBOLD
+ echo -e $BOLD"TEST $TEST_SEQUENCE_NR (${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5}"$EBOLD
((RES_TEST++))
+ ((TEST_SEQUENCE_NR++))
if [ $checkjsonarraycount -eq 0 ]; then
result="$(__do_curl $2$3)"
retcode=$?
### Generic test cases for varaible checking
-# Tests if a variable value in the CR is equal to a target value and and optional timeout.
-# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
-# equal to the target or not.
-# Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
-# before setting pass or fail depending on if the variable value becomes equal to the target
-# value or not.
-# (Function for test scripts)
-cr_equal() {
- if [ $# -eq 2 ] || [ $# -eq 3 ]; then
- __var_test "CR" "$LOCALHOST$CR_EXTERNAL_PORT/counter/" $1 "=" $2 $3
- else
- ((RES_CONF_FAIL++))
- __print_err "Wrong args to cr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
- fi
-}
-
# Tests if a variable value in the MR stub is equal to a target value and and optional timeout.
# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
# equal to the target or not.