# Counter for tests
TEST_SEQUENCE_NR=1
+# Function to log the start of a test case
__log_test_start() {
TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
echo -e $BOLD"TEST $TEST_SEQUENCE_NR (${BASH_LINENO[1]}): ${FUNCNAME[1]}" $@ $EBOLD
((TEST_SEQUENCE_NR++))
}
+# General function to log a failed test case
__log_test_fail_general() {
echo -e $RED" FAIL."$1 $ERED
((RES_FAIL++))
__check_stop_at_error
}
+# Function to log a test case failed due to incorrect response code
__log_test_fail_status_code() {
echo -e $RED" FAIL. Exepected status "$1", got "$2 $3 $ERED
((RES_FAIL++))
__check_stop_at_error
}
+# Function to log a test case failed due to incorrect response body
__log_test_fail_body() {
echo -e $RED" FAIL, returned body not correct"$ERED
((RES_FAIL++))
__check_stop_at_error
}
+# Function to log a test case that is not supported
__log_test_fail_not_supported() {
echo -e $RED" FAIL, function not supported"$ERED
((RES_FAIL++))
__check_stop_at_error
}
+# General function to log a passed test case
__log_test_pass() {
if [ $# -gt 0 ]; then
echo $@
#Counter for configurations
CONF_SEQUENCE_NR=1
+
+# Function to log the start of a configuration setup
__log_conf_start() {
TIMESTAMP=$(date "+%Y-%m-%d %H:%M:%S")
echo -e $BOLD"CONF $CONF_SEQUENCE_NR (${BASH_LINENO[1]}): "${FUNCNAME[1]} $@ $EBOLD
((CONF_SEQUENCE_NR++))
}
+# Function to log a failed configuration setup
__log_conf_fail_general() {
echo -e $RED" FAIL."$1 $ERED
((RES_CONF_FAIL++))
__check_stop_at_error
}
+# Function to log a failed configuration setup due to incorrect response code
__log_conf_fail_status_code() {
echo -e $RED" FAIL. Exepected status "$1", got "$2 $3 $ERED
((RES_CONF_FAIL++))
__check_stop_at_error
}
+# Function to log a failed configuration setup due to incorrect response body
__log_conf_fail_body() {
echo -e $RED" FAIL, returned body not correct"$ERED
((RES_CONF_FAIL++))
__check_stop_at_error
}
+# Function to log a passed configuration setup
__log_conf_ok() {
if [ $# -gt 0 ]; then
echo $@
return 0
}
+# The following sequence pull the configured images
echo -e $BOLD"Pulling configured images, if needed"$EBOLD
set_name=$(echo $name | rev | cut -d- -f2- | rev) # Cut index part of ric name to get the name of statefulset
# example gnb-g1-2 -> gnb-g1 where gnb-g1-2 is the ric name and gnb-g1 is the set name
echo $name"."$set_name"."$KUBE_NONRTRIC_NAMESPACE
-
}
# Find the named port to an app (using the service resource)
echo ""
}
-# # This function scales or deletes all resources for app selected by the testcase.
-# # args: -
-# # (Not for test scripts)
-# __clean_kube() {
-# echo -e $BOLD"Initialize kube services//pods/statefulsets/replicaset to initial state"$EBOLD
-
-# # Clean prestarted apps
-# __check_prestarted_image 'RICSIM'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD RICSIM $EBOLD to 0"
-# __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app nonrtric-a1simulator
-# fi
-
-# __check_prestarted_image 'PA'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD PA $EBOLD to 0"
-# __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app nonrtric-policymanagementservice
-# fi
-
-# __check_prestarted_image 'ECS'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD ECS $EBOLD to 0"
-# __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app nonrtric-enrichmentservice
-# fi
-
-# __check_prestarted_image 'RC'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD RC $EBOLD to 0"
-# __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app nonrtric-rappcatalogueservice
-# fi
-
-# __check_prestarted_image 'CP'
-# if [ $? -eq 0 ]; then
-# echo -e " CP replicas kept as is"
-# fi
-
-# __check_prestarted_image 'SDNC'
-# if [ $? -eq 0 ]; then
-# echo -e " SDNC replicas kept as is"
-# fi
-
-# __check_prestarted_image 'MR'
-# if [ $? -eq 0 ]; then
-# echo -e " MR replicas kept as is"
-# fi
-
-
-# # Clean included apps - apps fully managed by the script
-
-# ## Scale all to zero
-# __check_included_image 'RICSIM'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD RICSIM $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest RICSIM
-# fi
-
-# __check_included_image 'PA'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD PA $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest PA
-# fi
-
-# __check_included_image 'ECS'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD ECS $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest ECS
-# fi
-
-# __check_included_image 'RC'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD RC $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest RC
-# fi
-
-# __check_included_image 'CP'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD CP $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest CP
-# fi
-
-# __check_included_image 'SDNC'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD SDNC $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest SDNC
-# fi
-
-# __check_included_image 'CR'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD CR $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest CR
-# fi
-
-# __check_included_image 'MR'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD MR $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_ONAP_NAMESPACE autotest MR
-# fi
-
-# __check_included_image 'PRODSTUB'
-# if [ $? -eq 0 ]; then
-# echo -e " Scaling all kube resources for app $BOLD PRODSTUB $EBOLD to 0"
-# __kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest PRODSTUB
-# fi
-
-
-# ## Remove all resources
-
-# __check_included_image 'RICSIM'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD RICSIM $EBOLD"
-# __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest RICSIM
-# fi
-
-# __check_included_image 'PA'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD PA $EBOLD"
-# __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest PA
-# fi
-
-# __check_included_image 'ECS'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD ECS $EBOLD"
-# __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest ECS
-# fi
-
-# __check_included_image 'RC'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD RC $EBOLD"
-# __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest RC
-# fi
-
-# __check_included_image 'CP'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD CP $EBOLD"
-# __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest CP
-# fi
-
-# __check_included_image 'SDNC'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD SDNC $EBOLD"
-# __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest SDNC
-# fi
-
-# __check_included_image 'CR'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD CR $EBOLD"
-# __kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest CR
-# fi
-
-# __check_included_image 'MR'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD MR $EBOLD"
-# __kube_delete_all_resources $KUBE_ONAP_NAMESPACE autotest MR
-# fi
-
-# __check_included_image 'PRODSTUB'
-# if [ $? -eq 0 ]; then
-# echo -e " Deleting all kube resources for app $BOLD PRODSTUB $EBOLD"
-# __kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest PRODSTUB
-# fi
-
-# echo ""
-# }
-
# Function stop and remove all containers (docker) and services/deployments etc(kube)
# args: -
# Function for test script
else
__clean_containers
fi
-
}
# Function stop and remove all containers (docker) and services/deployments etc(kube) in the end of the test script, if the arg 'auto-clean' is given at test script start
Code Review / nonrtric.git / blobdiff