echo "Args: remote|remote-remove docker|kube --env-file <environment-filename> [release] [auto-clean] [--stop-at-error] "
echo " [--ricsim-prefix <prefix> ] [--use-local-image <app-nam>+] [--use-snapshot-image <app-nam>+]"
echo " [--use-staging-image <app-nam>+] [--use-release-image <app-nam>+] [--image-repo <repo-address]"
- echo " [--repo-policy local|remote] [--cluster-timeout <timeout-in seconds>]"
+ echo " [--repo-policy local|remote] [--cluster-timeout <timeout-in seconds>] [--print-stats]"
}
if [ $# -eq 1 ] && [ "$1" == "help" ]; then
echo "--image-repo - Url to optional image repo. Only locally built images will be re-tagged and pushed to this repo"
echo "--repo-policy - Policy controlling which images to re-tag and push if param --image-repo is set. Default is 'local'"
echo "--cluster-timeout - Optional timeout for cluster where it takes time to obtain external ip/host-name. Timeout in seconds. "
+ echo "--print-stats - Print current test stats after each test."
+
echo ""
echo "List of app short names supported: "$APP_SHORT_NAMES
exit 0
RES_CONF_FAIL=0
RES_DEVIATION=0
+#Var to control if current stats shall be printed
+PRINT_CURRENT_STATS=0
+
#File to keep deviation messages
DEVIATION_FILE=".tmp_deviations"
rm $DEVIATION_FILE &> /dev/null
if [ $? -eq 127 ]; then
echo -e $RED"Function not found, setting script to FAIL"$ERED
((RES_CONF_FAIL++))
+ __print_current_stats
fi
}
trap trap_fnc ERR
((TEST_SEQUENCE_NR++))
}
+# Function to print current statistics
+__print_current_stats() {
+ if [ $PRINT_CURRENT_STATS -ne 0 ]; then
+ echo " Currrent stats - tests, passes, fails, conf fails, deviations: $RES_TEST, $RES_PASS, $RES_FAIL, $RES_CONF_FAIL, $RES_DEVIATION"
+ fi
+}
+
# General function to log a failed test case
__log_test_fail_general() {
echo -e $RED" FAIL."$1 $ERED
((RES_FAIL++))
+ __print_current_stats
__check_stop_at_error
}
__log_test_fail_status_code() {
echo -e $RED" FAIL. Exepected status "$1", got "$2 $3 $ERED
((RES_FAIL++))
+ __print_current_stats
__check_stop_at_error
}
__log_test_fail_body() {
echo -e $RED" FAIL, returned body not correct"$ERED
((RES_FAIL++))
+ __print_current_stats
__check_stop_at_error
}
__log_test_fail_not_supported() {
echo -e $RED" FAIL, function not supported"$ERED
((RES_FAIL++))
+ __print_current_stats
__check_stop_at_error
}
fi
((RES_PASS++))
echo -e $GREEN" PASS"$EGREEN
+ __print_current_stats
}
#Counter for configurations
__log_conf_fail_general() {
echo -e $RED" FAIL."$1 $ERED
((RES_CONF_FAIL++))
+ __print_current_stats
__check_stop_at_error
}
__log_conf_fail_status_code() {
echo -e $RED" FAIL. Exepected status "$1", got "$2 $3 $ERED
((RES_CONF_FAIL++))
+ __print_current_stats
__check_stop_at_error
}
__log_conf_fail_body() {
echo -e $RED" FAIL, returned body not correct"$ERED
((RES_CONF_FAIL++))
+ __print_current_stats
__check_stop_at_error
}
echo $@
fi
echo -e $GREEN" OK"$EGREEN
+ __print_current_stats
}
#Var for measuring execution time
fi
fi
fi
+ if [ $paramerror -eq 0 ]; then
+ if [ "$1" == "--print-stats" ]; then
+ PRINT_CURRENT_STATS=1
+ echo "Option set - Print stats"
+ shift;
+ foundparm=0
+ fi
+ fi
done
echo ""
echo -e $RED"kubectl is required to run the test environment in kubernetes mode, pls install"$ERED
exit 1
fi
+else
+ if [ $RUNMODE == "KUBE" ]; then
+ res=$(kubectl cluster-info 2>&1)
+ if [ $? -ne 0 ]; then
+ echo -e "$BOLD$RED############################################# $ERED$EBOLD"
+ echo -e $BOLD$RED"Command 'kubectl cluster-info' returned error $ERED$EBOLD"
+ echo -e "$BOLD$RED############################################# $ERED$EBOLD"
+ echo " "
+ echo "kubectl response:"
+ echo $res
+ echo " "
+ echo "This script may have been started with user with no permission to run kubectl"
+ echo "Try running with 'sudo' or set 'KUBECONFIG'"
+ echo "Do either 1, 2 or 3 "
+ echo " "
+ echo "1"
+ echo "Run with sudo"
+ echo -e $BOLD"sudo <test-script-and-parameters>"$EBOLD
+ echo " "
+ echo "2"
+ echo "Export KUBECONFIG and pass env to sudo - (replace user)"
+ echo -e $BOLD"export KUBECONFIG='/home/<user>/.kube/config'"$EBOLD
+ echo -e $BOLD"sudo -E <test-script-and-parameters>"$EBOLD
+ echo " "
+ echo "3"
+ echo "Set KUBECONFIG inline (replace user)"
+ echo -e $BOLD"sudo KUBECONFIG='/home/<user>/.kube/config' <test-script-and-parameters>"$EBOLD
+
+ exit 1
+ fi
+ fi
fi
echo -e $BOLD"Checking configured image setting for this test case"$EBOLD
echo -e $RED"One or more images could not be pulled or containers using the images could not be stopped/removed"$ERED
echo -e $RED"Or local image, overriding remote image, does not exist"$ERED
if [ $IMAGE_CATEGORY == "DEV" ]; then
- echo -e $RED"Note that SNAPSHOT images may be purged from nexus after a certain period."$ERED
- echo -e $RED"In that case, switch to use a released image instead."$ERED
+ echo ""
+ echo -e $RED"Note that SNAPSHOT and staging images may be purged from nexus after a certain period."$ERED
+ echo -e $RED"In addition, the image may not have been updated in the current release so no SNAPSHOT or staging image exists"$ERED
+ echo -e $RED"In these cases, switch to use a released image instead, use the flag '--use-release-image <App-short-name>'"$ERED
+ echo -e $RED"Use the 'App-short-name' for the applicable image from the above table: 'Images configured for start arg'."$ERED
fi
echo "#################################################################################################"
echo ""
((RES_DEVIATION++))
echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
+ __print_current_stats
echo ""
}
### Functions for kube management
###################################
+# Get resource type for scaling
+# args: <resource-name> <namespace>
+__kube_get_resource_type() {
+ kubectl get deployment $1 -n $2 1> /dev/null 2> ./tmp/kubeerr
+ if [ $? -eq 0 ]; then
+ echo "deployment"
+ return 0
+ fi
+ kubectl get sts $1 -n $2 1> /dev/null 2> ./tmp/kubeerr
+ if [ $? -eq 0 ]; then
+ echo "sts"
+ return 0
+ fi
+ echo "unknown-resource-type"
+ return 1
+}
+
# Scale a kube resource to a specific count
# args: <resource-type> <resource-name> <namespace> <target-count>
# (Not for test scripts)
envsubst < $input_yaml > $output_yaml
- kubectl delete -f $output_yaml #> /dev/null 2>&1 # Delete the previous terminated pod - if existing
+ kubectl delete -f $output_yaml 1> /dev/null 2> /dev/null # Delete the previous terminated pod - if existing
__kube_create_instance pod pvc-cleaner $input_yaml $output_yaml
if [ $? -ne 0 ]; then
appcount=$1
shift
- os_version=$(uname -a 2> /dev/null | awk '{print tolower($0)}' | grep "microsoft")
- if [[ "$os_version" == *"microsoft"* ]]; then
- echo -e $YELLOW" Workaround for Linux on Win - delay container start, 1 sec, to make sure files mounted in the container are available on disk - WLS problem"$EYELLOW
- sleep 1
- fi
-
-
if [ "$compose_args" == "NODOCKERARGS" ]; then
docker-compose -f $compose_file up -d &> .dockererr
if [ $? -ne 0 ]; then
if [ $duration -gt $6 ]; then
((RES_FAIL++))
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
+ __print_current_stats
__check_stop_at_error
return
fi
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
+ __print_current_stats
return
elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
+ __print_current_stats
return
elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
+ __print_current_stats
return
elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
((RES_PASS++))
echo -e " Result=${result} after ${duration} seconds${SAMELINE}"
echo -e $GREEN" PASS${EGREEN} - Result=${result} after ${duration} seconds"
+ __print_current_stats
return
else
if [ $duration -gt $6 ]; then
((RES_FAIL++))
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached in ${6} seconds, result = ${result}"
+ __print_current_stats
__check_stop_at_error
return
fi
if [ $retcode -ne 0 ]; then
((RES_FAIL++))
echo -e $RED" FAIL ${ERED}- ${3} ${4} ${5} not reached, result = ${result}"
+ __print_current_stats
__check_stop_at_error
elif [ $4 = "=" ] && [ "$result" -eq $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
+ __print_current_stats
elif [ $4 = ">" ] && [ "$result" -gt $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
+ __print_current_stats
elif [ $4 = "<" ] && [ "$result" -lt $5 ]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
+ __print_current_stats
elif [ $4 = "contain_str" ] && [[ $result =~ $5 ]]; then
((RES_PASS++))
echo -e $GREEN" PASS${EGREEN} - Result=${result}"
+ __print_current_stats
else
((RES_FAIL++))
echo -e $RED" FAIL${ERED} - ${3} ${4} ${5} not reached, result = ${result}"
+ __print_current_stats
__check_stop_at_error
fi
else