fi
# Just resetting any previous echo formatting...
-echo -ne $EBOLD$ERED$EGREEN
+echo -ne $EBOLD
# source test environment variables
. ../common/test_env.sh
G2_COUNT=0
G3_COUNT=0
-# Var to switch between http and https. Extra curl flag needed for https
+# Vars to switch between http and https. Extra curl flag needed for https
export RIC_SIM_HTTPX="http"
export RIC_SIM_LOCALHOST=$RIC_SIM_HTTPX"://localhost:"
export RIC_SIM_PORT=$RIC_SIM_INTERNAL_PORT
export RIC_SIM_CERT_MOUNT_DIR="./fakedir" #Fake dir so that the sim container does not find any cert
+export MR_HTTPX="http"
+export MR_PORT=$MR_INTERNAL_PORT
+export MR_LOCAL_PORT=$MR_EXTERNAL_PORT #When agent is running outside the docker net
+
+export SDNC_HTTPX="http"
+export SDNC_PORT=$SDNC_INTERNAL_PORT
+export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT #When agent is running outside the docker net
+
#Localhost constant
LOCALHOST="http://localhost:"
# Make curl retries for http response codes set in this env var, space separated list of codes
AGENT_RETRY_CODES=""
+# Var to contol if the agent runs in a container (normal = 0) or as application on the local machine ( = 1)
+AGENT_STAND_ALONE=0
+
# Var to hold 'auto' in case containers shall be stopped when test case ends
AUTO_CLEAN=""
RES_PASS=0
RES_FAIL=0
RES_CONF_FAIL=0
+RES_DEVIATION=0
+
+#File to keep deviation messages
+DEVIATION_FILE=".tmp_deviations"
+rm $DEVIATION_FILE &> /dev/null
#Var for measuring execution time
TCTEST_START=$SECONDS
+#File to save timer measurement results
+TIMER_MEASUREMENTS=".timer_measurement.txt"
+echo -e "Activity \t Duration" > $TIMER_MEASUREMENTS
+
+
echo "-------------------------------------------------------------------------------------------------"
echo "----------------------------------- Test case: "$ATC
echo "----------------------------------- Started: "$(date)
app="Consul"; __check_and_pull_image $1 "$app" $CONSUL_APP_NAME $CONSUL_IMAGE
app="CBS"; __check_and_pull_image $1 "$app" $CBS_APP_NAME $CBS_IMAGE
app="SDNC DB"; __check_and_pull_image $1 "$app" $SDNC_APP_NAME $SDNC_DB_IMAGE
-app="SDNC ONAP A1 Adapter"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_A1_ADAPTER_IMAGE
-app="SDNC ONAP DB"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_DB_IMAGE
+
+echo -e $YELLOW"SDNC ONAP image is skipped"$EYELLOW
+#app="SDNC ONAP A1 Adapter"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_A1_ADAPTER_IMAGE
+#app="SDNC ONAP DB"; __check_and_pull_image $1 "$app" $SDNC_ONAP_APP_NAME $SDNC_ONAP_DB_IMAGE
# MR stub image not checked, will be built by this script - only local image
# CR stub image not checked, will be built by this script - only local image
fi
fi
+ if [ $RES_DEVIATION -gt 0 ]; then
+ echo "Test case deviations"
+ echo "===================================="
+ cat $DEVIATION_FILE
+ fi
+ echo ""
+ echo "Timer measurement in the test script"
+ echo "===================================="
+ column -t -s $'\t' $TIMER_MEASUREMENTS
+ echo ""
+
echo "++++ Number of tests: "$RES_TEST
echo "++++ Number of passed tests: "$RES_PASS
echo "++++ Number of failed tests: "$RES_FAIL
echo ""
echo "++++ Number of failed configs: "$RES_CONF_FAIL
+ echo ""
+ echo "++++ Number of test case deviations: "$RES_DEVIATION
+ echo ""
echo "------------------------------------- Test case complete ---------------------------------"
echo "-------------------------------------------------------------------------------------------------"
echo ""
###### Functions for start, configuring, stoping, cleaning etc ######
#####################################################################
+# Start timer for time measurement
+# args - (any args will be printed though)
+start_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ TC_TIMER=$SECONDS
+ echo " Timer started"
+}
+
+# Print the value of the time (in seconds)
+# args - <timer message to print> - timer value and message will be printed both on screen
+# and in the timer measurement report
+print_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <timer message to print>" $@
+ exit 1
+ fi
+ duration=$(($SECONDS-$TC_TIMER))
+ if [ $duration -eq 0 ]; then
+ duration="<1 second"
+ else
+ duration=$duration" seconds"
+ fi
+ echo " Timer duration :" $duration
+
+ echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
+}
+
+# Print the value of the time (in seconds) and reset the timer
+# args - <timer message to print> - timer value and message will be printed both on screen
+# and in the timer measurement report
+print_and_reset_timer() {
+ echo -e $BOLD"INFO(${BASH_LINENO[0]}): "${FUNCNAME[0]}"," $@ $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <timer message to print>" $@
+ exit 1
+ fi
+ duration=$(($SECONDS-$TC_TIMER))" seconds"
+ if [ $duration -eq 0 ]; then
+ duration="<1 second"
+ else
+ duration=$duration" seconds"
+ fi
+ echo " Timer duration :" $duration
+ TC_TIMER=$SECONDS
+ echo " Timer reset"
+
+ echo -e "${@:1} \t $duration" >> $TIMER_MEASUREMENTS
+
+}
+# Print info about a deviations from intended tests
+# Each deviation counted is also printed in the testreport
+# args <deviation message to print>
+deviation() {
+ echo -e $BOLD"DEVIATION(${BASH_LINENO[0]}): "${FUNCNAME[0]} $EBOLD
+ if [ $# -lt 1 ]; then
+ ((RES_CONF_FAIL++))
+ __print_err "need 1 or more args, <deviation message to print>" $@
+ exit 1
+ fi
+ ((RES_DEVIATION++))
+ echo -e $BOLD$YELLOW" Test case deviation: ${@:1}"$EYELLOW$EBOLD
+ echo "Line: ${BASH_LINENO[0]} - ${@:1}" >> $DEVIATION_FILE
+ echo ""
+}
# Stop and remove all containers
# args: -
__find_sim_port() {
name=$1" " #Space appended to prevent matching 10 if 1 is desired....
cmdstr="docker ps --filter name=${name} --format \"{{.Names}} {{.Ports}}\" | grep '${name}' | sed s/0.0.0.0:// | cut -f 2 -d ' ' | cut -f 1 -d '-'"
+ cmdstr="docker ps --filter name=${name} --format \"{{.Names}} {{.Ports}}\" | grep '${name}' | cut -f 3 -d ',' | sed s/0.0.0.0:// | cut -f 2 -d ' ' | cut -f 1 -d '-'"
+
res=$(eval $cmdstr)
if [[ "$res" =~ ^[0-9]+$ ]]; then
echo $res
appname=$1
localport=$2
url=$3
- app_started=0
- for i in {1..10}; do
- if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
- echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
- app_started=1
- break
- else
- sleep $i
- fi
- done
- if [ $app_started -eq 0 ]; then
- ((RES_CONF_FAIL++))
- echo ""
- echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
- return 1
- fi
- if [ $localport -eq 0 ]; then
- while [ $localport -eq 0 ]; do
- echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
- localport=$(__find_sim_port $appname)
- sleep 1
- echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
+ if [[ $appname != "STANDALONE_"* ]] ; then
+ app_started=0
+ for i in {1..10}; do
+ if [ "$(docker inspect --format '{{ .State.Running }}' $appname)" == "true" ]; then
+ echo -e " Container $BOLD$1$EBOLD$GREEN running$EGREEN on$BOLD image $(docker inspect --format '{{ .Config.Image }}' ${appname}) $EBOLD"
+ app_started=1
+ break
+ else
+ sleep $i
+ fi
done
- echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
- echo ""
+ if [ $app_started -eq 0 ]; then
+ ((RES_CONF_FAIL++))
+ echo ""
+ echo -e $RED" Container $BOLD${appname}$EBOLD could not be started"$ERED
+ return 1
+ fi
+ if [ $localport -eq 0 ]; then
+ while [ $localport -eq 0 ]; do
+ echo -ne " Waiting for container ${appname} to publish its ports...${SAMELINE}"
+ localport=$(__find_sim_port $appname)
+ sleep 1
+ echo -ne " Waiting for container ${appname} to publish its ports...retrying....${SAMELINE}"
+ done
+ echo -ne " Waiting for container ${appname} to publish its ports...retrying....$GREEN OK $EGREEN"
+ echo ""
+ fi
fi
pa_st=false
echo -e $RED"Problem to launch container(s) with docker-compose"$ERED
cat .dockererr
fi
+ elif [ "$2" == "STANDALONE" ]; then
+ echo "Skipping docker-compose"
else
docker-compose up -d $2 &> .dockererr
if [ $? -ne 0 ]; then
cat .dockererr
fi
fi
-
+ app_prefix=""
+ if [ "$2" == "STANDALONE" ]; then
+ app_prefix="STANDALONE_"
+ fi
shift; shift;
cntr=0
while [ $cntr -lt $variableArgCount ]; do
- app=$1; shift;
+ app=$app_prefix$1; shift;
port=$1; shift;
url=$1; shift;
httpx=$1; shift;
return 1
fi
body="$(__do_curl $LOCALHOST$CBS_EXTERNAL_PORT/service_component_all/$POLICY_AGENT_APP_NAME)"
+ echo $body > ".output"$1
if [ $? -ne 0 ]; then
echo -e $RED" FAIL - json config could not be loaded from consul/cbs, contents cannot be checked." $ERED
config_json=$config_json"\n \"controller\": ["
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
- config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_APP_NAME:$SDNC_INTERNAL_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://$SDNC_APP_NAME:$SDNC_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"$SDNC_HTTPX://localhost:$SDNC_LOCAL_PORT\","
+ fi
config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
config_json=$config_json"\n }"
config_json=$config_json"\n \"controller\": ["
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$SDNC_ONAP_APP_NAME\","
- config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_ONAP_APP_NAME:$SDNC_ONAP_INTERNAL_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"http://$SDNC_ONAP_APP_NAME:$SDNC_ONAP_INTERNAL_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"http://localhost:$SDNC_ONAP_EXTERNAL_PORT\","
+ fi
config_json=$config_json"\n \"userName\": \"$SDNC_ONAP_USER\","
config_json=$config_json"\n \"password\": \"$SDNC_ONAP_PWD\""
config_json=$config_json"\n }"
config_json=$config_json"\n \"dmaap_publisher\": {"
config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"http://$MR_APP_NAME:$MR_INTERNAL_PORT/events/A1-POLICY-AGENT-WRITE\""
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_WRITE_URL\""
+ else
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_WRITE_URL\""
+ fi
config_json=$config_json"\n }"
config_json=$config_json"\n }"
config_json=$config_json"\n },"
config_json=$config_json"\n \"dmaap_subscriber\": {"
config_json=$config_json"\n \"type\": \"$MR_APP_NAME\","
config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"http://$MR_APP_NAME:$MR_INTERNAL_PORT/events/A1-POLICY-AGENT-READ/users/policy-agent\""
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://$MR_APP_NAME:$MR_PORT$MR_READ_URL\""
+ else
+ config_json=$config_json"\n \"topic_url\": \"$MR_HTTPX://localhost:$MR_LOCAL_PORT$MR_READ_URL\""
+ fi
config_json=$config_json"\n }"
config_json=$config_json"\n }"
config_json=$config_json"\n },"
fi
config_json=$config_json"\n {"
config_json=$config_json"\n \"name\": \"$ric\","
- config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
+ else
+ config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://localhost:$(__find_sim_port $ric)\","
+ fi
if [ $1 == "SDNC" ]; then
config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
elif [ $1 == "SDNC_ONAP" ]; then
echo -e $BOLD"Starting SDNC A1 Controller"$EBOLD
- __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT "/apidoc/explorer" "http"
+ __start_container sdnc NODOCKERARGS $SDNC_APP_NAME $SDNC_EXTERNAL_PORT $SDNC_ALIVE_URL "http"
+
+}
+
+use_sdnc_http() {
+ echo -e $BOLD"Using http between agent and SDNC"$EBOLD
+ export SDNC_HTTPX="http"
+ export SDNC_PORT=$SDNC_INTERNAL_PORT
+ export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_PORT
+ echo ""
+}
+use_sdnc_https() {
+ echo -e $BOLD"Using https between agent and SDNC"$EBOLD
+ export SDNC_HTTPX="https"
+ export SDNC_PORT=$SDNC_INTERNAL_SECURE_PORT
+ export SDNC_LOCAL_PORT=$SDNC_EXTERNAL_SECURE_PORT
+ echo ""
}
#######################
echo -e $BOLD"Starting SDNC ONAP A1 Adapter"$EBOLD
- __start_container sdnc_onap NODOCKERARGS $SDNC_ONAP_APP_NAME $SDNC_ONAP_EXTERNAL_PORT "/apidoc/explorer" "http"
+ __start_container sdnc_onap NODOCKERARGS $SDNC_ONAP_APP_NAME $SDNC_ONAP_EXTERNAL_PORT $SDNC_ONAP_ALIVE_URL "http"
}
exit 1
fi
+
#Config of the prop file shall be inserted here
#Copy file to /tmp and then to final destination, a trick to get correct permission of the file.
echo -e $BOLD"Starting Message Router 'mrstub'"$EBOLD
export MR_CERT_MOUNT_DIR="./cert"
__start_container mr NODOCKERARGS $MR_APP_NAME $MR_EXTERNAL_PORT "/" "http"
+}
+use_mr_http() {
+ echo -e $BOLD"Using http between agent and MR"$EBOLD
+ export MR_HTTPX="http"
+ export MR_PORT=$MR_INTERNAL_PORT
+ export MR_LOCAL_PORT=$MR_EXTERNAL_PORT
+ echo ""
+}
+
+use_mr_https() {
+ echo -e $BOLD"Using https between agent and MR"$EBOLD
+ export MR_HTTPX="https"
+ export MR_PORT=$MR_INTERNAL_SECURE_PORT
+ export MR_LOCAL_PORT=$MR_EXTERNAL_SECURE_PORT
+ echo ""
}
+
################
### CR functions
################
### Policy Agents functions
###########################
-# Start the policy agwent
+# Use an agent on the local machine instead of container
+use_agent_stand_alone() {
+ AGENT_STAND_ALONE=1
+}
+
+# Start the policy agent
# args: -
# (Function for test scripts)
start_policy_agent() {
echo -e $BOLD"Starting Policy Agent"$EBOLD
- __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ if [ $AGENT_STAND_ALONE -eq 0 ]; then
+ __start_container policy_agent NODOCKERARGS $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ else
+ echo -e $RED"The consul config produced by this test script (filename '<fullpath-to-autotest-dir>.output<file-name>"$ERED
+ echo -e $RED"where the file name is the file in the consul_config_app command in this script) must be pointed out by the agent "$ERED
+ echo -e $RED"application.yaml"$ERED
+ echo -e $RED"The application jar may need to be built beforefor continuing"$ERED
+ echo -e $RED"The agent shall now be running on port $POLICY_AGENT_EXTERNAL_PORT for http"$ERED
+
+ read -p "<press any key to continue>"
+ __start_container policy_agent "STANDALONE" $POLICY_AGENT_APP_NAME $POLICY_AGENT_EXTERNAL_PORT "/status" "http"
+ fi
}
echo -e $BOLD"Using agent REST interface with https"$EBOLD
export ADAPTER=$RESTBASE_SECURE
echo ""
+ return 0
}
# All calls to the agent will be directed to the agent dmaap interface from now on
# args: -
# (Function for test scripts)
use_agent_dmaap() {
- echo -e $BOLD"Using agent DMAAP interface"$EBOLD
+ echo -e $BOLD"Agent using DMAAP interface"$EBOLD
export ADAPTER=$DMAAPBASE
echo ""
-
+ return 0
}
+
# Turn on debug level tracing in the agent
# args: -
# (Function for test scripts)
__print_err "could not set debug mode" $@
return 1
fi
- return 0
echo ""
+ return 0
}
# Perform curl retries when making direct call to the agent for the specified http response codes
echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD
AGENT_RETRY_CODES=$@
echo ""
+ return
}
#################
__print_err "need one arg, <file-prefix>" $@
exit 1
fi
- echo -e $BOLD"Storing all container logs, Policy Agent app log and consul config using prefix: "$1
+ echo -e $BOLD"Storing all container logs, Policy Agent app log and consul config using prefix: "$1$EBOLD
docker logs $CONSUL_APP_NAME > $TESTLOGS/$ATC/$1_consul.log 2>&1
docker logs $CBS_APP_NAME > $TESTLOGS/$ATC/$1_cbs.log 2>&1
fi
#echo -e "---- ${1} sim test criteria: \033[1m ${3} \033[0m ${4} ${5} within ${6} seconds ----"
- echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"
+ echo -e $BOLD"TEST(${BASH_LINENO[1]}): ${1}, ${3} ${4} ${5} within ${6} seconds"$EBOLD
((RES_TEST++))
start=$SECONDS
ctr=0
fi
echo -e $BOLD"INFO(${BASH_LINENO[0]}): mrstub, $1 = $(__do_curl $LOCALHOST$MR_EXTERNAL_PORT/counter/$1)"$EBOLD
}
-
-
Code Review / nonrtric.git / blobdiff