+++ /dev/null
-#!/bin/bash
-
-# ============LICENSE_START===============================================
-# Copyright (C) 2021 Nordix Foundation. All rights reserved.
-# ========================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=================================================
-#
-
-# This is a script that contains management and test functions for Policy Agent
-
-################ Test engine functions ################
-
-# Create the image var used during the test
-# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
-# <image-tag-suffix> is present only for images with staging, snapshot,release tags
-__PA_imagesetup() {
- __check_and_create_image_var PA "POLICY_AGENT_IMAGE" "POLICY_AGENT_IMAGE_BASE" "POLICY_AGENT_IMAGE_TAG" $1 "$POLICY_AGENT_DISPLAY_NAME"
-}
-
-# Pull image from remote repo or use locally built image
-# arg: <pull-policy-override> <pull-policy-original>
-# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
-# <pull-policy-original> Shall be used for images that does not allow overriding
-# Both var may contain: 'remote', 'remote-remove' or 'local'
-__PA_imagepull() {
- __check_and_pull_image $1 "$POLICY_AGENT_DISPLAY_NAME" $POLICY_AGENT_APP_NAME POLICY_AGENT_IMAGE
-}
-
-# Build image (only for simulator or interfaces stubs owned by the test environment)
-# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
-# <image-tag-suffix> is present only for images with staging, snapshot,release tags
-__PA_imagebuild() {
- echo -e $RED" Image for app PA shall never be built"$ERED
-}
-
-# Generate a string for each included image using the app display name and a docker images format string
-# If a custom image repo is used then also the source image from the local repo is listed
-# arg: <docker-images-format-string> <file-to-append>
-__PA_image_data() {
- echo -e "$POLICY_AGENT_DISPLAY_NAME\t$(docker images --format $1 $POLICY_AGENT_IMAGE)" >> $2
- if [ ! -z "$POLICY_AGENT_IMAGE_SOURCE" ]; then
- echo -e "-- source image --\t$(docker images --format $1 $POLICY_AGENT_IMAGE_SOURCE)" >> $2
- fi
-}
-
-# Scale kubernetes resources to zero
-# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
-# This function is called for apps fully managed by the test script
-__PA_kube_scale_zero() {
- __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest PA
-}
-
-# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
-# This function is called for prestarted apps not managed by the test script.
-__PA_kube_scale_zero_and_wait() {
- __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-policymanagementservice
-}
-
-# Delete all kube resouces for the app
-# This function is called for apps managed by the test script.
-__PA_kube_delete_all() {
- __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest PA
-}
-
-# Store docker logs
-# This function is called for apps managed by the test script.
-# args: <log-dir> <file-prexix>
-__PA_store_docker_logs() {
- if [ $RUNMODE == "KUBE" ]; then
- kubectl $KUBECONF logs -l "autotest=PA" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_policy-agent.log 2>&1
- else
- docker logs $POLICY_AGENT_APP_NAME > $1$2_policy-agent.log 2>&1
- fi
-}
-
-# Initial setup of protocol, host and ports
-# This function is called for apps managed by the test script.
-# args: -
-__PA_initial_setup() {
- use_agent_rest_http
-}
-
-# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
-# For docker, the namespace shall be excluded
-# This function is called for apps managed by the test script as well as for prestarted apps.
-# args: -
-__PA_statisics_setup() {
- if [ $RUNMODE == "KUBE" ]; then
- echo "PA $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE"
- else
- echo "PA $POLICY_AGENT_APP_NAME"
- fi
-}
-
-# Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
-# args: -
-__PA_test_requirements() {
- :
-}
-
-
-#######################################################
-
-###########################
-### Policy Agents functions
-###########################
-
-# Set http as the protocol to use for all communication to the Policy Agent
-# args: -
-# (Function for test scripts)
-use_agent_rest_http() {
- __agent_set_protocoll "http" $POLICY_AGENT_INTERNAL_PORT $POLICY_AGENT_EXTERNAL_PORT
-}
-
-# Set https as the protocol to use for all communication to the Policy Agent
-# args: -
-# (Function for test scripts)
-use_agent_rest_https() {
- __agent_set_protocoll "https" $POLICY_AGENT_INTERNAL_SECURE_PORT $POLICY_AGENT_EXTERNAL_SECURE_PORT
-}
-
-# All calls to the agent will be directed to the agent dmaap interface over http from now on
-# args: -
-# (Function for test scripts)
-use_agent_dmaap_http() {
- echo -e $BOLD"$POLICY_AGENT_DISPLAY_NAME dmaap protocol setting"$EBOLD
- echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
- PA_ADAPTER_TYPE="MR-HTTP"
- echo ""
-}
-
-# All calls to the agent will be directed to the agent dmaap interface over https from now on
-# args: -
-# (Function for test scripts)
-use_agent_dmaap_https() {
- echo -e $BOLD"$POLICY_AGENT_DISPLAY_NAME dmaap protocol setting"$EBOLD
- echo -e " Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the agent"
- echo -e $YELLOW" Setting http instead of https - MR only uses http"$EYELLOW
- PA_ADAPTER_TYPE="MR-HTTPS"
- echo ""
-}
-
-# Setup paths to svc/container for internal and external access
-# args: <protocol> <internal-port> <external-port>
-__agent_set_protocoll() {
- echo -e $BOLD"$POLICY_AGENT_DISPLAY_NAME protocol setting"$EBOLD
- echo -e " Using $BOLD $1 $EBOLD towards $POLICY_AGENT_DISPLAY_NAME"
-
- ## Access to Dmaap adapter
-
- PA_SERVICE_PATH=$1"://"$POLICY_AGENT_APP_NAME":"$2 # docker access, container->container and script->container via proxy
- if [ $RUNMODE == "KUBE" ]; then
- PA_SERVICE_PATH=$1"://"$POLICY_AGENT_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
- fi
-
- # PA_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
- PA_ADAPTER_TYPE="REST"
- PA_ADAPTER=$PA_SERVICE_PATH
-
- echo ""
-}
-
-# Make curl retries towards the agent for http response codes set in this env var, space separated list of codes
-AGENT_RETRY_CODES=""
-
-#Save first worker node the pod is started on
-__PA_WORKER_NODE=""
-
-# Export env vars for config files, docker compose and kube resources
-# args: PROXY|NOPROXY
-__export_agent_vars() {
-
- export POLICY_AGENT_APP_NAME
- export POLICY_AGENT_APP_NAME_ALIAS
- export POLICY_AGENT_DISPLAY_NAME
-
- export KUBE_NONRTRIC_NAMESPACE
- export POLICY_AGENT_IMAGE
- export POLICY_AGENT_INTERNAL_PORT
- export POLICY_AGENT_INTERNAL_SECURE_PORT
- export POLICY_AGENT_EXTERNAL_PORT
- export POLICY_AGENT_EXTERNAL_SECURE_PORT
- export POLICY_AGENT_CONFIG_MOUNT_PATH
- export POLICY_AGENT_DATA_MOUNT_PATH
- export POLICY_AGENT_CONFIG_CONFIGMAP_NAME=$POLICY_AGENT_APP_NAME"-config"
- export POLICY_AGENT_DATA_CONFIGMAP_NAME=$POLICY_AGENT_APP_NAME"-data"
- export POLICY_AGENT_PKG_NAME
- export CONSUL_HOST
- export CONSUL_INTERNAL_PORT
- export CONFIG_BINDING_SERVICE
- export POLICY_AGENT_CONFIG_KEY
- export DOCKER_SIM_NWNAME
- export POLICY_AGENT_HOST_MNT_DIR
- export POLICY_AGENT_CONFIG_FILE
-
- export POLICY_AGENT_DATA_PV_NAME=$POLICY_AGENT_APP_NAME"-pv"
- export POLICY_AGENT_DATA_PVC_NAME=$POLICY_AGENT_APP_NAME"-pvc"
- ##Create a unique path for the pv each time to prevent a previous volume to be reused
- export POLICY_AGENT_PV_PATH="padata-"$(date +%s)
- export POLICY_AGENT_CONTAINER_MNT_DIR
- export HOST_PATH_BASE_DIR
-
- if [ $1 == "PROXY" ]; then
- export AGENT_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started
- export AGENT_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started
- if [ $AGENT_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$AGENT_HTTP_PROXY_CONFIG_HOST_NAME" ]; then
- echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW
- else
- echo " Configured with http proxy"
- fi
- else
- export AGENT_HTTP_PROXY_CONFIG_PORT=0
- export AGENT_HTTP_PROXY_CONFIG_HOST_NAME=""
- echo " Configured without http proxy"
- fi
-}
-
-
-# Start the policy agent
-# args: (docker) PROXY|NOPROXY <config-file>
-# args: (kube) PROXY|NOPROXY <config-file> [ <data-file>]
-# (Function for test scripts)
-start_policy_agent() {
- echo -e $BOLD"Starting $POLICY_AGENT_DISPLAY_NAME"$EBOLD
-
- if [ $RUNMODE == "KUBE" ]; then
-
- # Check if app shall be fully managed by the test script
- __check_included_image "PA"
- retcode_i=$?
-
- # Check if app shall only be used by the testscipt
- __check_prestarted_image "PA"
- retcode_p=$?
-
- if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
- echo -e $RED"The $POLICY_AGENT_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
- echo -e $RED"The $POLICY_AGENT_APP_NAME will not be started"$ERED
- exit
- fi
- if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
- echo -e $RED"The $POLICY_AGENT_APP_NAME app is included both as managed and prestarted in this test script"$ERED
- echo -e $RED"The $POLICY_AGENT_APP_NAME will not be started"$ERED
- exit
- fi
-
- if [ $retcode_p -eq 0 ]; then
- echo -e " Using existing $POLICY_AGENT_APP_NAME deployment and service"
- echo " Setting $POLICY_AGENT_APP_NAME replicas=1"
- res_type=$(__kube_get_resource_type $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
- __kube_scale $res_type $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
- fi
-
- if [ $retcode_i -eq 0 ]; then
-
- echo -e " Creating $POLICY_AGENT_APP_NAME app and expose service"
-
- #Check if nonrtric namespace exists, if not create it
- __kube_create_namespace $KUBE_NONRTRIC_NAMESPACE
-
- __export_agent_vars $1
-
- # Create config map for config
- configfile=$PWD/tmp/$POLICY_AGENT_CONFIG_FILE
- cp $2 $configfile
- output_yaml=$PWD/tmp/pa_cfc.yaml
- __kube_create_configmap $POLICY_AGENT_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest PA $configfile $output_yaml
-
- # Create config map for data
- data_json=$PWD/tmp/$POLICY_AGENT_DATA_FILE
- if [ $# -lt 3 ]; then
- #create empty dummy file
- echo "{}" > $data_json
- else
- cp $3 $data_json
- fi
- output_yaml=$PWD/tmp/pa_cfd.yaml
- __kube_create_configmap $POLICY_AGENT_DATA_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest PA $data_json $output_yaml
-
- ## Create pv
- input_yaml=$SIM_GROUP"/"$POLICY_AGENT_COMPOSE_DIR"/"pv.yaml
- output_yaml=$PWD/tmp/pa_pv.yaml
- __kube_create_instance pv $POLICY_AGENT_APP_NAME $input_yaml $output_yaml
-
- ## Create pvc
- input_yaml=$SIM_GROUP"/"$POLICY_AGENT_COMPOSE_DIR"/"pvc.yaml
- output_yaml=$PWD/tmp/pa_pvc.yaml
- __kube_create_instance pvc $POLICY_AGENT_APP_NAME $input_yaml $output_yaml
-
- # Create service
- input_yaml=$SIM_GROUP"/"$POLICY_AGENT_COMPOSE_DIR"/"svc.yaml
- output_yaml=$PWD/tmp/pa_svc.yaml
- __kube_create_instance service $POLICY_AGENT_APP_NAME $input_yaml $output_yaml
-
- # Create app
- input_yaml=$SIM_GROUP"/"$POLICY_AGENT_COMPOSE_DIR"/"app.yaml
- output_yaml=$PWD/tmp/pa_app.yaml
- __kube_create_instance app $POLICY_AGENT_APP_NAME $input_yaml $output_yaml
-
- fi
-
- # Keep the initial worker node in case the pod need to be "restarted" - must be made to the same node due to a volume mounted on the host
- if [ $retcode_i -eq 0 ]; then
- __PA_WORKER_NODE=$(kubectl $KUBECONF get pod -l "autotest=PA" -n $KUBE_NONRTRIC_NAMESPACE -o jsonpath='{.items[*].spec.nodeName}')
- if [ -z "$__PA_WORKER_NODE" ]; then
- echo -e $YELLOW" Cannot find worker node for pod for $POLICY_AGENT_APP_NAME, persistency may not work"$EYELLOW
- fi
- else
- echo -e $YELLOW" Persistency may not work for app $POLICY_AGENT_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
- fi
-
- __check_service_start $POLICY_AGENT_APP_NAME $PA_SERVICE_PATH$POLICY_AGENT_ALIVE_URL
-
- else
- __check_included_image 'PA'
- if [ $? -eq 1 ]; then
- echo -e $RED"The Policy Agent app is not included in this test script"$ERED
- echo -e $RED"The Policy Agent will not be started"$ERED
- exit
- fi
-
- curdir=$PWD
- cd $SIM_GROUP
- cd policy_agent
- cd $POLICY_AGENT_HOST_MNT_DIR
- #cd ..
- if [ -d db ]; then
- if [ "$(ls -A $DIR)" ]; then
- echo -e $BOLD" Cleaning files in mounted dir: $PWD/db"$EBOLD
- rm -rf db/* &> /dev/null
- if [ $? -ne 0 ]; then
- echo -e $RED" Cannot remove database files in: $PWD"$ERED
- exit 1
- fi
- fi
- else
- echo " No files in mounted dir or dir does not exists"
- fi
- cd $curdir
-
- __export_agent_vars $1
-
- dest_file=$SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_HOST_MNT_DIR/application.yaml
-
- envsubst < $2 > $dest_file
-
- __start_container $POLICY_AGENT_COMPOSE_DIR "" NODOCKERARGS 1 $POLICY_AGENT_APP_NAME
-
- __check_service_start $POLICY_AGENT_APP_NAME $PA_SERVICE_PATH$POLICY_AGENT_ALIVE_URL
- fi
-
- __collect_endpoint_stats_image_info "PMS" $POLICY_AGENT_IMAGE
- echo ""
- return 0
-}
-
-# Stop the policy agent
-# args: -
-# args: -
-# (Function for test scripts)
-stop_policy_agent() {
- echo -e $BOLD"Stopping $POLICY_AGENT_DISPLAY_NAME"$EBOLD
-
- if [ $RUNMODE == "KUBE" ]; then
-
- __check_prestarted_image "PA"
- if [ $? -eq 0 ]; then
- echo -e $YELLOW" Persistency may not work for app $POLICY_AGENT_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
- res_type=$(__kube_get_resource_type $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
- __kube_scale $res_type $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE 0
- return 0
- fi
- __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest PA
- echo " Deleting the replica set - a new will be started when the app is started"
- tmp=$(kubectl $KUBECONF delete rs -n $KUBE_NONRTRIC_NAMESPACE -l "autotest=PA")
- if [ $? -ne 0 ]; then
- echo -e $RED" Could not delete replica set "$RED
- ((RES_CONF_FAIL++))
- return 1
- fi
- else
- docker stop $POLICY_AGENT_APP_NAME &> ./tmp/.dockererr
- if [ $? -ne 0 ]; then
- __print_err "Could not stop $POLICY_AGENT_APP_NAME" $@
- cat ./tmp/.dockererr
- ((RES_CONF_FAIL++))
- return 1
- fi
- fi
- echo -e $BOLD$GREEN"Stopped"$EGREEN$EBOLD
- echo ""
- return 0
-}
-
-# Start a previously stopped policy agent
-# args: -
-# (Function for test scripts)
-start_stopped_policy_agent() {
- echo -e $BOLD"Starting (the previously stopped) $POLICY_AGENT_DISPLAY_NAME"$EBOLD
-
- if [ $RUNMODE == "KUBE" ]; then
-
- __check_prestarted_image "PA"
- if [ $? -eq 0 ]; then
- echo -e $YELLOW" Persistency may not work for app $POLICY_AGENT_APP_NAME in multi-worker node config when running it as a prestarted app"$EYELLOW
- res_type=$(__kube_get_resource_type $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE)
- __kube_scale $res_type $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
- __check_service_start $POLICY_AGENT_APP_NAME $PA_SERVICE_PATH$POLICY_AGENT_ALIVE_URL
- return 0
- fi
-
- # Tie the PMS to the same worker node it was initially started on
- # A PVC of type hostPath is mounted to PMS, for persistent storage, so the PMS must always be on the node which mounted the volume
- if [ -z "$__PA_WORKER_NODE" ]; then
- echo -e $RED" No initial worker node found for pod "$RED
- ((RES_CONF_FAIL++))
- return 1
- else
- echo -e $BOLD" Setting nodeSelector kubernetes.io/hostname=$__PA_WORKER_NODE to deployment for $POLICY_AGENT_APP_NAME. Pod will always run on this worker node: $__PA_WORKER_NODE"$BOLD
- echo -e $BOLD" The mounted volume is mounted as hostPath and only available on that worker node."$BOLD
- tmp=$(kubectl $KUBECONF patch deployment $POLICY_AGENT_APP_NAME -n $KUBE_NONRTRIC_NAMESPACE --patch '{"spec": {"template": {"spec": {"nodeSelector": {"kubernetes.io/hostname": "'$__PA_WORKER_NODE'"}}}}}')
- if [ $? -ne 0 ]; then
- echo -e $YELLOW" Cannot set nodeSelector to deployment for $POLICY_AGENT_APP_NAME, persistency may not work"$EYELLOW
- fi
- __kube_scale deployment $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
- fi
- else
- docker start $POLICY_AGENT_APP_NAME &> ./tmp/.dockererr
- if [ $? -ne 0 ]; then
- __print_err "Could not start (the stopped) $POLICY_AGENT_APP_NAME" $@
- cat ./tmp/.dockererr
- ((RES_CONF_FAIL++))
- return 1
- fi
- fi
- __check_service_start $POLICY_AGENT_APP_NAME $PA_SERVICE_PATH$POLICY_AGENT_ALIVE_URL
- if [ $? -ne 0 ]; then
- return 1
- fi
- echo ""
- return 0
-}
-
-
-# Function to perpare the consul configuration according to the current simulator configuration
-# args: SDNC|NOSDNC <output-file>
-# (Function for test scripts)
-prepare_consul_config() {
- echo -e $BOLD"Prepare Consul config"$EBOLD
-
- echo " Writing consul config for "$POLICY_AGENT_APP_NAME" to file: "$2
-
- if [ $# != 2 ]; then
- ((RES_CONF_FAIL++))
- __print_err "need two args, SDNC|NOSDNC <output-file>" $@
- exit 1
- fi
-
- if [ $1 == "SDNC" ]; then
- echo -e " Config$BOLD including SDNC$EBOLD configuration"
- elif [ $1 == "NOSDNC" ]; then
- echo -e " Config$BOLD excluding SDNC$EBOLD configuration"
- else
- ((RES_CONF_FAIL++))
- __print_err "need two args, SDNC|NOSDNC <output-file>" $@
- exit 1
- fi
-
- config_json="\n {"
- if [ $1 == "SDNC" ]; then
- config_json=$config_json"\n \"controller\": ["
- config_json=$config_json"\n {"
- config_json=$config_json"\n \"name\": \"$SDNC_APP_NAME\","
- config_json=$config_json"\n \"baseUrl\": \"$SDNC_SERVICE_PATH\","
- config_json=$config_json"\n \"userName\": \"$SDNC_USER\","
- config_json=$config_json"\n \"password\": \"$SDNC_PWD\""
- config_json=$config_json"\n }"
- config_json=$config_json"\n ],"
- fi
-
- config_json=$config_json"\n \"streams_publishes\": {"
- config_json=$config_json"\n \"dmaap_publisher\": {"
- config_json=$config_json"\n \"type\": \"message-router\","
- config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_WRITE_URL\""
- config_json=$config_json"\n }"
- config_json=$config_json"\n }"
- config_json=$config_json"\n },"
- config_json=$config_json"\n \"streams_subscribes\": {"
- config_json=$config_json"\n \"dmaap_subscriber\": {"
- config_json=$config_json"\n \"type\": \"message-router\","
- config_json=$config_json"\n \"dmaap_info\": {"
- config_json=$config_json"\n \"topic_url\": \"$MR_SERVICE_PATH$MR_READ_URL\""
- config_json=$config_json"\n }"
- config_json=$config_json"\n }"
- config_json=$config_json"\n },"
-
- config_json=$config_json"\n \"ric\": ["
-
- if [ $RUNMODE == "KUBE" ]; then
- result=$(kubectl $KUBECONF get pods -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.items[?(@.metadata.labels.autotest=="RICSIM")].metadata.name}')
- rics=""
- ric_cntr=0
- if [ $? -eq 0 ] && [ ! -z "$result" ]; then
- for im in $result; do
- if [[ $im != *"-0" ]]; then
- ric_subdomain=$(kubectl $KUBECONF get pod $im -n $KUBE_A1SIM_NAMESPACE -o jsonpath='{.spec.subdomain}')
- rics=$rics" "$im"."$ric_subdomain"."$KUBE_A1SIM_NAMESPACE
- let ric_cntr=ric_cntr+1
- fi
- done
- fi
- if [ $ric_cntr -eq 0 ]; then
- echo $YELLOW"Warning: No rics found for the configuration"$EYELLOW
- fi
- else
- rics=$(docker ps --filter "name=$RIC_SIM_PREFIX" --filter "network=$DOCKER_SIM_NWNAME" --filter "status=running" --format {{.Names}})
- if [ $? -ne 0 ] || [ -z "$rics" ]; then
- echo -e $RED" FAIL - the names of the running RIC Simulator cannot be retrieved." $ERED
- ((RES_CONF_FAIL++))
- return 1
- fi
- fi
- cntr=0
- for ric in $rics; do
- if [ $cntr -gt 0 ]; then
- config_json=$config_json"\n ,"
- fi
- config_json=$config_json"\n {"
- if [ $RUNMODE == "KUBE" ]; then
- ric_id=${ric%.*.*} #extract pod id from full hosthame
- ric_id=$(echo "$ric_id" | tr '-' '_')
- else
- if [ $DOCKER_COMPOSE_VERION == "V1" ]; then
- ric_id=$ric
- else
- ric_id=$(echo "$ric" | tr '-' '_') #ric id still needs underscore as it is different from the container name
- fi
- fi
- echo " Found a1 sim: "$ric_id
- config_json=$config_json"\n \"name\": \"$ric_id\","
- config_json=$config_json"\n \"baseUrl\": \"$RIC_SIM_HTTPX://$ric:$RIC_SIM_PORT\","
- if [ $1 == "SDNC" ]; then
- config_json=$config_json"\n \"controller\": \"$SDNC_APP_NAME\","
- fi
- config_json=$config_json"\n \"managedElementIds\": ["
- config_json=$config_json"\n \"me1_$ric_id\","
- config_json=$config_json"\n \"me2_$ric_id\""
- config_json=$config_json"\n ]"
- config_json=$config_json"\n }"
- let cntr=cntr+1
- done
-
- config_json=$config_json"\n ]"
- config_json=$config_json"\n}"
-
- if [ $RUNMODE == "KUBE" ]; then
- config_json="{\"config\":"$config_json"}"
- fi
-
- printf "$config_json">$2
-
- echo ""
-}
-
-# Load the the appl config for the agent into a config map
-agent_load_config() {
- echo -e $BOLD"Agent - load config from "$EBOLD$1
- data_json=$PWD/tmp/$POLICY_AGENT_DATA_FILE
- cp $1 $data_json
- output_yaml=$PWD/tmp/pa_cfd.yaml
- __kube_create_configmap $POLICY_AGENT_APP_NAME"-data" $KUBE_NONRTRIC_NAMESPACE autotest PA $data_json $output_yaml
- echo ""
-}
-
-
-# Turn on debug level tracing in the agent
-# args: -
-# (Function for test scripts)
-set_agent_debug() {
- echo -e $BOLD"Setting agent debug logging"$EBOLD
- curlString="$PA_SERVICE_PATH$POLICY_AGENT_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}"
- result=$(__do_curl "$curlString")
- if [ $? -ne 0 ]; then
- __print_err "could not set debug mode" $@
- ((RES_CONF_FAIL++))
- return 1
- fi
- echo ""
- return 0
-}
-
-# Turn on trace level tracing in the agent
-# args: -
-# (Function for test scripts)
-set_agent_trace() {
- echo -e $BOLD"Setting agent trace logging"$EBOLD
- curlString="$PA_SERVICE_PATH$POLICY_AGENT_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}"
- result=$(__do_curl "$curlString")
- if [ $? -ne 0 ]; then
- __print_err "could not set trace mode" $@
- ((RES_CONF_FAIL++))
- return 1
- fi
- echo ""
- return 0
-}
-
-# Perform curl retries when making direct call to the agent for the specified http response codes
-# Speace separated list of http response codes
-# args: [<response-code>]*
-use_agent_retries() {
- echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD
- AGENT_RETRY_CODES=$@
- echo ""
- return
-}
-
-# Check the agent logs for WARNINGs and ERRORs
-# args: -
-# (Function for test scripts)
-check_policy_agent_logs() {
- __check_container_logs "Policy Agent" $POLICY_AGENT_APP_NAME $POLICY_AGENT_LOGPATH WARN ERR
-}
-
-#########################################################
-#### Test case functions A1 Policy management service
-#########################################################
-
-# This function compare the size, towards a target value, of a json array returned from <url> of the Policy Agent.
-# This is done immediately by setting PASS or FAIL or wait up to and optional timeout before setting PASS or FAIL
-# args: json:<url> <target-value> [<timeout-in-seconds]
-# (Function for test scripts)
-api_equal() {
- echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG
- if [ $# -eq 2 ] || [ $# -eq 3 ]; then
- if [[ $1 == "json:"* ]]; then
- if [ "$PMS_VERSION" == "V2" ]; then
- __var_test "Policy Agent" $PA_SERVICE_PATH$PMS_API_PREFIX"/v2/" $1 "=" $2 $3
- else
- __var_test "Policy Agent" $PA_SERVICE_PATH"/" $1 "=" $2 $3
- fi
- return 0
- fi
- fi
- __print_err "needs two or three args: json:<json-array-param> <target-value> [ timeout ]" $@
- return 1
-}
-
-# API Test function: GET /policies and V2 GET /v2/policy-instances
-# args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]
-# args(V2): <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]
-# (Function for test scripts)
-api_get_policies() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" == "V2" ]; then
- paramError=0
- variableParams=$(($#-4))
- if [ $# -lt 4 ]; then
- paramError=1
- elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
- paramError=1
- elif [ $# -gt 5 ] && [ $(($variableParams%7)) -ne 0 ]; then
- paramError=1
- fi
-
- if [ $paramError -ne 0 ]; then
- __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]" $@
- return 1
- fi
- else
- paramError=0
- variableParams=$(($#-4))
- if [ $# -lt 4 ]; then
- paramError=1
- elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then
- paramError=1
- elif [ $# -gt 5 ] && [ $(($variableParams%5)) -ne 0 ]; then
- paramError=1
- fi
-
- if [ $paramError -ne 0 ]; then
- __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]" $@
- return 1
- fi
- fi
-
- queryparams=""
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $2 != "NORIC" ]; then
- queryparams="?ric_id="$2
- fi
- if [ $3 != "NOSERVICE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?service_id="$3
- else
- queryparams=$queryparams"&service_id="$3
- fi
- fi
- if [ $4 != "NOTYPE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?policytype_id="$4
- else
- queryparams=$queryparams"&policytype_id="$4
- fi
- fi
-
- query="/v2/policy-instances"$queryparams
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -gt 4 ]; then
- body=${res:0:${#res}-3}
- if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
- targetJson="["
- else
- targetJson="["
- arr=(${@:5})
-
- for ((i=0; i<$(($#-4)); i=i+7)); do
-
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- targetJson=$targetJson"{\"policy_id\":\"$UUID${arr[$i]}\",\"ric_id\":\"${arr[$i+1]}\",\"service_id\":\"${arr[$i+2]}\",\"policytype_id\":"
- if [ "${arr[$i+3]}" == "EMPTY" ]; then
- targetJson=$targetJson"\"\","
- else
- targetJson=$targetJson"\"${arr[$i+3]}\","
- fi
- targetJson=$targetJson"\"transient\":${arr[$i+4]},\"status_notification_uri\":\"${arr[$i+5]}\","
- file="./tmp/.p.json"
- sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+6]} > $file
- json=$(cat $file)
- targetJson=$targetJson"\"policy_data\":"$json"}"
- done
- fi
-
- targetJson=$targetJson"]"
- targetJson="{\"policies\": $targetJson}"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
- else
- if [ $2 != "NORIC" ]; then
- queryparams="?ric="$2
- fi
- if [ $3 != "NOSERVICE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?service="$3
- else
- queryparams=$queryparams"&service="$3
- fi
- fi
- if [ $4 != "NOTYPE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?type="$4
- else
- queryparams=$queryparams"&type="$4
- fi
- fi
-
- query="/policies"$queryparams
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -gt 4 ]; then
- if [ $# -eq 5 ] && [ $5 == "NOID" ]; then
- targetJson="["
- else
- body=${res:0:${#res}-3}
- targetJson="["
- arr=(${@:5})
-
- for ((i=0; i<$(($#-4)); i=i+5)); do
-
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- targetJson=$targetJson"{\"id\":\"$UUID${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i+1]}\",\"service\":\"${arr[$i+2]}\",\"type\":"
- if [ "${arr[$i+3]}" == "EMPTY" ]; then
- targetJson=$targetJson"\"\","
- else
- targetJson=$targetJson"\"${arr[$i+3]}\","
- fi
- file="./tmp/.p.json"
- sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+4]} > $file
- json=$(cat $file)
- targetJson=$targetJson"\"json\":"$json"}"
- done
- fi
-
- targetJson=$targetJson"]"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
- fi
- __collect_endpoint_stats "PMS" 00 "GET" $PMS_API_PREFIX"/v2/policy-instances" $status
- __log_test_pass
- return 0
-
-}
-
-
-# API Test function: GET /policy and V2 GET /v2/policies/{policy_id}
-# args: <response-code> <policy-id> [<template-file>]
-# args(V2): <response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]
-
-# (Function for test scripts)
-api_get_policy() {
- __log_test_start $@
-
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $# -ne 2 ] && [ $# -ne 8 ]; then
- __print_err "<response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]" $@
- return 1
- fi
- query="/v2/policies/$UUID$2"
- else
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<response-code> <policy-id> [<template-file>] " $@
- return 1
- fi
- query="/policy?id=$UUID$2"
- fi
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $# -eq 8 ]; then
-
- #Create a policy json to compare with
- body=${res:0:${#res}-3}
-
- targetJson="\"ric_id\":\"$5\",\"policy_id\":\"$UUID$2\",\"service_id\":\"$4\""
- if [ $7 != "NOTRANSIENT" ]; then
- targetJson=$targetJson", \"transient\":$7"
- fi
- if [ $6 != "NOTYPE" ]; then
- targetJson=$targetJson", \"policytype_id\":\"$6\""
- else
- targetJson=$targetJson", \"policytype_id\":\"\""
- fi
- if [ $8 != "NOURL" ]; then
- targetJson=$targetJson", \"status_notification_uri\":\"$8\""
- fi
-
- data=$(sed 's/XXX/'${2}'/g' $3)
- targetJson=$targetJson", \"policy_data\":$data"
- targetJson="{$targetJson}"
-
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
- else
- if [ $# -eq 3 ]; then
- #Create a policy json to compare with
- body=${res:0:${#res}-3}
- file="./tmp/.p.json"
- sed 's/XXX/'${2}'/g' $3 > $file
- targetJson=$(< $file)
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- fi
- fi
- fi
-
- __collect_endpoint_stats "PMS" 01 "GET" $PMS_API_PREFIX"/v2/policies/{policy_id}" $status
- __log_test_pass
- return 0
-}
-
-# API Test function: PUT /policy and V2 PUT /policies
-# args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]
-# args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]
-# (Function for test scripts)
-api_put_policy() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $# -lt 8 ] || [ $# -gt 9 ]; then
- __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]" $@
- return 1
- fi
- else
- if [ $# -lt 7 ] || [ $# -gt 8 ]; then
- __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]" $@
- return 1
- fi
- fi
-
- count=0
- max=1
- serv=$2
- ric=$3
- pt=$4
- pid=$5
- trans=$6
-
- if [ "$PMS_VERSION" == "V2" ]; then
- noti=$7
- temp=$8
- if [ $# -eq 9 ]; then
- max=$9
- fi
- else
- temp=$7
- if [ $# -eq 8 ]; then
- max=$8
- fi
- fi
-
- while [ $count -lt $max ]; do
- if [ "$PMS_VERSION" == "V2" ]; then
-
- query="/v2/policies"
-
- inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\""
- if [ $trans != "NOTRANSIENT" ]; then
- inputJson=$inputJson", \"transient\":$trans"
- fi
- if [ $pt != "NOTYPE" ]; then
- inputJson=$inputJson", \"policytype_id\":\"$pt\""
- else
- inputJson=$inputJson", \"policytype_id\":\"\""
- fi
- if [ $noti != "NOURL" ]; then
- inputJson=$inputJson", \"status_notification_uri\":\"$noti\""
- fi
- file="./tmp/.p.json"
- data=$(sed 's/XXX/'${pid}'/g' $temp)
- inputJson=$inputJson", \"policy_data\":$data"
- inputJson="{$inputJson}"
- echo $inputJson > $file
- else
- query="/policy?id=$UUID$pid&ric=$ric&service=$serv"
-
- if [ $pt != "NOTYPE" ]; then
- query=$query"&type=$pt"
- fi
-
- if [ $trans != NOTRANSIENT ]; then
- query=$query"&transient=$trans"
- fi
-
- file="./tmp/.p.json"
- sed 's/XXX/'${pid}'/g' $temp > $file
- fi
- res="$(__do_curl_to_api PA PUT $query $file)"
- status=${res:${#res}-3}
- echo -ne " Executing "$count"("$max")${SAMELINE}"
- if [ $status -ne $1 ]; then
- echo " Executed "$count"?("$max")"
- __log_test_fail_status_code $1 $status
- return 1
- fi
- let pid=$pid+1
- let count=$count+1
- echo -ne " Executed "$count"("$max")${SAMELINE}"
- done
- __collect_endpoint_stats "PMS" 02 "PUT" $PMS_API_PREFIX"/v2/policies" $status $max
- echo ""
-
- __log_test_pass
- return 0
-}
-
-# API Test function: PUT /policy and V2 PUT /policies, to run in batch
-# args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]
-# args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]
-# (Function for test scripts)
-
-api_put_policy_batch() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $# -lt 8 ] || [ $# -gt 9 ]; then
- __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]" $@
- return 1
- fi
- else
- if [ $# -lt 7 ] || [ $# -gt 8 ]; then
- __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]" $@
- return 1
- fi
- fi
-
- count=0
- max=1
- serv=$2
- ric=$3
- pt=$4
- pid=$5
- trans=$6
- if [ "$PMS_VERSION" == "V2" ]; then
- noti=$7
- temp=$8
- if [ $# -eq 9 ]; then
- max=$9
- fi
- else
- temp=$7
- if [ $# -eq 8 ]; then
- max=$8
- fi
- fi
-
- ARR=""
- while [ $count -lt $max ]; do
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/policies"
-
- inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\""
- if [ $trans != "NOTRANSIENT" ]; then
- inputJson=$inputJson", \"transient\":$trans"
- fi
- if [ $pt != "NOTYPE" ]; then
- inputJson=$inputJson", \"policytype_id\":\"$pt\""
- else
- inputJson=$inputJson", \"policytype_id\":\"\""
- fi
- if [ $noti != "NOURL" ]; then
- inputJson=$inputJson", \"status_notification_uri\":\"$noti\""
- fi
- file="./tmp/.p.json"
- data=$(sed 's/XXX/'${pid}'/g' $temp)
- inputJson=$inputJson", \"policy_data\":$data"
- inputJson="{$inputJson}"
- echo $inputJson > $file
- else
- query="/policy?id=$UUID$pid&ric=$ric&service=$serv"
-
- if [ $pt != "NOTYPE" ]; then
- query=$query"&type=$pt"
- fi
-
- if [ $trans != NOTRANSIENT ]; then
- query=$query"&transient=$trans"
- fi
- file="./tmp/.p.json"
- sed 's/XXX/'${pid}'/g' $temp > $file
- fi
- res="$(__do_curl_to_api PA PUT_BATCH $query $file)"
- status=${res:${#res}-3}
- echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
-
- if [ $status -ne 200 ]; then
- echo " Requested(batch) "$count"?("$max")"
- __log_test_fail_status_code 200 $status
- return 1
- fi
- cid=${res:0:${#res}-3}
- ARR=$ARR" "$cid
- let pid=$pid+1
- let count=$count+1
- echo -ne " Requested(batch) "$count"("$max")${SAMELINE}"
- done
-
- echo ""
- count=0
- for cid in $ARR; do
-
- res="$(__do_curl_to_api PA RESPONSE $cid)"
- status=${res:${#res}-3}
- echo -ne " Accepting(batch) "$count"("$max")${SAMELINE}"
-
- if [ $status -ne $1 ]; then
- echo " Accepted(batch) "$count"?("$max")"
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- let count=$count+1
- echo -ne " Accepted(batch) "$count"("$max")${SAMELINE}"
- done
- __collect_endpoint_stats "PMS" 02 "PUT" $PMS_API_PREFIX"/v2/policies" $1 $max
-
- echo ""
-
- __log_test_pass
- return 0
-}
-
-# API Test function: PUT /policy and V2 PUT /policies, to run in i parallel for a number of rics
-# args: <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>
-# args(V2): <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>
-# (Function for test scripts)
-api_put_policy_parallel() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $# -ne 11 ]; then
- __print_err "<response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>" $@
- return 1
- fi
- else
- if [ $# -ne 10 ]; then
- __print_err " <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>" $@
- return 1
- fi
- fi
- resp_code=$1; shift;
- serv=$1; shift
- ric_base=$1; shift;
- num_rics=$1; shift;
- type=$1; shift;
- start_id=$1; shift;
- transient=$1; shift;
- if [ "$PMS_VERSION" == "V2" ]; then
- noti=$1; shift;
- else
- noti=""
- fi
- template=$1; shift;
- count=$1; shift;
- pids=$1; shift;
-
- #if [ $PA_ADAPTER != $RESTBASE ] && [ $PA_ADAPTER != $RESTBASE_SECURE ]; then
- if [ $PA_ADAPTER_TYPE != "REST" ]; then
- echo " Info - api_put_policy_parallel uses only the agent REST interface - create over dmaap in parallel is not supported"
- echo " Info - will execute over agent REST"
- fi
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $serv == "NOSERVICE" ]; then
- serv=""
- fi
- query="$PMS_API_PREFIX/v2/policies"
- else
- if [ $serv == "NOSERVICE" ]; then
- serv=""
- fi
- query="/policy?service=$serv"
-
- if [ $type != "NOTYPE" ]; then
- query=$query"&type=$type"
- fi
-
- if [ $transient != NOTRANSIENT ]; then
- query=$query"&transient=$transient"
- fi
- fi
-
- urlbase=${PA_ADAPTER}${query}
-
- httpproxy="NOPROXY"
- if [ ! -z "$KUBE_PROXY_PATH" ]; then
- httpproxy=$KUBE_PROXY_PATH
- fi
-
- for ((i=1; i<=$pids; i++))
- do
- uuid=$UUID
- if [ -z "$uuid" ]; then
- uuid="NOUUID"
- fi
- echo "" > "./tmp/.pid${i}.res.txt"
- if [ "$PMS_VERSION" == "V2" ]; then
- echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt"
- else
- echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $template $count $pids $i $httpproxy > "./tmp/.pid${i}.txt"
- fi
- echo $i
- done | xargs -n 1 -I{} -P $pids bash -c '{
- arg=$(echo {})
- echo " Parallel process $arg started"
- tmp=$(< "./tmp/.pid${arg}.txt")
- python3 ../common/create_policies_process.py $tmp > ./tmp/.pid${arg}.res.txt
- }'
- msg=""
- for ((i=1; i<=$pids; i++))
- do
- file="./tmp/.pid${i}.res.txt"
- tmp=$(< $file)
- if [ -z "$tmp" ]; then
- echo " Process $i : unknown result (result file empty"
- msg="failed"
- else
- res=${tmp:0:1}
- if [ $res == "0" ]; then
- echo " Process $i : OK - "${tmp:1}
- else
- echo " Process $i : failed - "${tmp:1}
- msg="failed"
- fi
- fi
- done
- if [ -z $msg ]; then
- __collect_endpoint_stats "PMS" 02 "PUT" $PMS_API_PREFIX"/v2/policies" $resp_code $(($count*$num_rics))
- __log_test_pass " $(($count*$num_rics)) policy request(s) executed"
- return 0
- fi
-
- __log_test_fail_general "One of more processes failed to execute"
- return 1
-}
-
-# API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}
-# args: <response-code> <policy-id> [count]
-# (Function for test scripts)
-api_delete_policy() {
- __log_test_start $@
-
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<response-code> <policy-id> [count]" $@
- return 1
- fi
-
- count=0
- max=1
-
- if [ $# -eq 3 ]; then
- max=$3
- fi
-
- pid=$2
-
- while [ $count -lt $max ]; do
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/policies/"$UUID$pid
- else
- query="/policy?id="$UUID$pid
- fi
- res="$(__do_curl_to_api PA DELETE $query)"
- status=${res:${#res}-3}
- echo -ne " Executing "$count"("$max")${SAMELINE}"
-
- if [ $status -ne $1 ]; then
- echo " Executed "$count"?("$max")"
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- let pid=$pid+1
- let count=$count+1
- echo -ne " Executed "$count"("$max")${SAMELINE}"
- done
- __collect_endpoint_stats "PMS" 03 "DELETE" $PMS_API_PREFIX"/v2/policies/{policy_id}" $status $max
- echo ""
-
- __log_test_pass
- return 0
-}
-
-# API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in batch
-# args: <response-code> <policy-id> [count]
-# (Function for test scripts)
-api_delete_policy_batch() {
- __log_test_start $@
-
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<response-code> <policy-id> [count]" $@
- return 1
- fi
-
- count=0
- max=1
-
- if [ $# -eq 3 ]; then
- max=$3
- fi
-
- pid=$2
- ARR=""
- while [ $count -lt $max ]; do
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/policies/"$UUID$pid
- else
- query="/policy?id="$UUID$pid
- fi
- res="$(__do_curl_to_api PA DELETE_BATCH $query)"
- status=${res:${#res}-3}
- echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}"
-
- if [ $status -ne 200 ]; then
- echo " Requested(batch) "$count"?("$max")"
- __log_test_fail_status_code 200 $status
- return 1
- fi
- cid=${res:0:${#res}-3}
- ARR=$ARR" "$cid
- let pid=$pid+1
- let count=$count+1
- echo -ne " Requested(batch) "$count"("$max")${SAMELINE}"
- done
-
- echo ""
-
- count=0
- for cid in $ARR; do
-
- res="$(__do_curl_to_api PA RESPONSE $cid)"
- status=${res:${#res}-3}
- echo -ne " Deleting(batch) "$count"("$max")${SAMELINE}"
-
- if [ $status -ne $1 ]; then
- echo " Deleted(batch) "$count"?("$max")"
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- let count=$count+1
- echo -ne " Deleted(batch) "$count"("$max")${SAMELINE}"
- done
- __collect_endpoint_stats "PMS" 03 "DELETE" $PMS_API_PREFIX"/v2/policies/{policy_id}" $1 $max
-
- echo ""
-
- __log_test_pass
- return 0
-}
-
-# API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in i parallel for a number of rics
-# args: <response-code> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>
-# (Function for test scripts)
-api_delete_policy_parallel() {
- __log_test_start $@
-
- if [ $# -ne 5 ]; then
- __print_err " <response-code> <ric-id-base> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>" $@
- return 1
- fi
- resp_code=$1; shift;
- num_rics=$1; shift;
- start_id=$1; shift;
- count=$1; shift;
- pids=$1; shift;
-
- #if [ $PA_ADAPTER != $RESTBASE ] && [ $PA_ADAPTER != $RESTBASE_SECURE ]; then
- if [ $PA_ADAPTER_TYPE != "REST" ]; then
- echo " Info - api_delete_policy_parallel uses only the agent REST interface - create over dmaap in parallel is not supported"
- echo " Info - will execute over agent REST"
- fi
-
- if [ "$PMS_VERSION" == "V2" ]; then
- query="$PMS_API_PREFIX/v2/policies/"
- else
- query="/policy"
- fi
-
- urlbase=${PA_ADAPTER}${query}
-
- httpproxy="NOPROXY"
- if [ ! -z "$KUBE_PROXY_PATH" ]; then
- httpproxy=$KUBE_PROXY_PATH
- fi
-
- for ((i=1; i<=$pids; i++))
- do
- uuid=$UUID
- if [ -z "$uuid" ]; then
- uuid="NOUUID"
- fi
- echo "" > "./tmp/.pid${i}.del.res.txt"
- echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i $httpproxy> "./tmp/.pid${i}.del.txt"
- echo $i
- done | xargs -n 1 -I{} -P $pids bash -c '{
- arg=$(echo {})
- echo " Parallel process $arg started"
- tmp=$(< "./tmp/.pid${arg}.del.txt")
- python3 ../common/delete_policies_process.py $tmp > ./tmp/.pid${arg}.del.res.txt
- }'
- msg=""
- for ((i=1; i<=$pids; i++))
- do
- file="./tmp/.pid${i}.del.res.txt"
- tmp=$(< $file)
- if [ -z "$tmp" ]; then
- echo " Process $i : unknown result (result file empty"
- msg="failed"
- else
- res=${tmp:0:1}
- if [ $res == "0" ]; then
- echo " Process $i : OK - "${tmp:1}
- else
- echo " Process $i : failed - "${tmp:1}
- msg="failed"
- fi
- fi
- done
- if [ -z $msg ]; then
- __collect_endpoint_stats "PMS" 03 "DELETE" $PMS_API_PREFIX"/v2/policies/{policy_id}" $resp_code $(($count*$num_rics))
- __log_test_pass " $(($count*$num_rics)) policy request(s) executed"
- return 0
- fi
-
- __log_test_fail_general "One of more processes failed to execute"
- return 1
-}
-
-# API Test function: GET /policy_ids and V2 GET /v2/policies
-# args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)
-# (Function for test scripts)
-api_get_policy_ids() {
- __log_test_start $@
-
- if [ $# -lt 4 ]; then
- __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)" $@
- return 1
- fi
-
- queryparams=""
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $2 != "NORIC" ]; then
- queryparams="?ric_id="$2
- fi
-
- if [ $3 != "NOSERVICE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?service_id="$3
- else
- queryparams=$queryparams"&service_id="$3
- fi
- fi
- if [ $4 != "NOTYPE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?policytype_id="$4
- else
- queryparams=$queryparams"&policytype_id="$4
- fi
- fi
-
- query="/v2/policies"$queryparams
- else
- if [ $2 != "NORIC" ]; then
- queryparams="?ric="$2
- fi
-
- if [ $3 != "NOSERVICE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?service="$3
- else
- queryparams=$queryparams"&service="$3
- fi
- fi
- if [ $4 != "NOTYPE" ]; then
- if [ -z $queryparams ]; then
- queryparams="?type="$4
- else
- queryparams=$queryparams"&type="$4
- fi
- fi
-
- query="/policy_ids"$queryparams
- fi
-
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -gt 4 ]; then
- body=${res:0:${#res}-3}
- targetJson="["
-
- for pid in ${@:5} ; do
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- if [ $pid != "NOID" ]; then
- targetJson=$targetJson"\"$UUID$pid\""
- fi
- done
-
- targetJson=$targetJson"]"
- if [ "$PMS_VERSION" == "V2" ]; then
- targetJson="{\"policy_ids\": $targetJson}"
- fi
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
-
- __collect_endpoint_stats "PMS" 04 "GET" $PMS_API_PREFIX"/v2/policies" $status
- __log_test_pass
- return 0
-}
-
-# API Test function: V2 GET /v2/policy-types/{policyTypeId}
-# args(V2): <response-code> <policy-type-id> [<schema-file>]
-# (Function for test scripts)
-api_get_policy_type() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" != "V2" ]; then
- __log_test_fail_not_supported
- return 1
- fi
-
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
- return 1
- fi
- query="/v2/policy-types/$2"
-
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -eq 3 ]; then
-
- body=${res:0:${#res}-3}
-
- targetJson=$(< $3)
- targetJson="{\"policy_schema\":$targetJson}"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
-
- __collect_endpoint_stats "PMS" 05 "GET" $PMS_API_PREFIX"/v2/policy-types/{policyTypeId}" $status
- __log_test_pass
- return 0
-}
-
-# API Test function: GET /policy_schema
-# args: <response-code> <policy-type-id> [<schema-file>]
-# (Function for test scripts)
-api_get_policy_schema() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" == "V2" ]; then
- __log_test_fail_not_supported
- return 1
- fi
-
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<response-code> <policy-type-id> [<schema-file>]" $@
- return 1
- fi
- query="/policy_schema?id=$2"
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -eq 3 ]; then
-
- body=${res:0:${#res}-3}
-
- targetJson=$(< $3)
-
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
-
- __collect_endpoint_stats "PMS" 06 "GET" $PMS_API_PREFIX"/v2/policy_schema" $status
- __log_test_pass
- return 0
-}
-
-# API Test function: GET /policy_schemas
-# args: <response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*
-# args(V2): <response-code>
-# (Function for test scripts)
-api_get_policy_schemas() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $# -ne 1 ]; then
- __print_err "<response-code>" $@
- return 1
- fi
- else
- if [ $# -lt 2 ]; then
- __print_err "<response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*" $@
- return 1
- fi
- fi
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/policy-schemas"
- else
- query="/policy_schemas"
- if [ $2 != "NORIC" ]; then
- query=$query"?ric="$2
- fi
- fi
-
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -gt 2 ]; then
- body=${res:0:${#res}-3}
- targetJson="["
-
- for file in ${@:3} ; do
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- if [ $file == "NOFILE" ]; then
- targetJson=$targetJson"{}"
- else
- targetJson=$targetJson$(< $file)
- fi
- done
-
- targetJson=$targetJson"]"
- if [ "$PMS_VERSION" == "V2" ]; then
- targetJson="{\"policy_schemas\": $targetJson }"
- fi
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
-
- __collect_endpoint_stats "PMS" 07 "GET" $PMS_API_PREFIX"/v2/policy-schemas" $status
- __log_test_pass
- return 0
-}
-
-# API Test function: GET /policy_status and V2 GET /policies/{policy_id}/status
-# arg: <response-code> <policy-id> [ (STD|STD2 <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>) ]
-# (Function for test scripts)
-api_get_policy_status() {
- __log_test_start $@
-
- if [ $# -lt 2 ] || [ $# -gt 5 ]; then
- __print_err "<response-code> <policy-id> [(STD <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>)]" $@
- return 1
- fi
-
- targetJson=""
- if [ $# -eq 2 ]; then
- :
- elif [ "$3" == "STD" ]; then
- targetJson="{\"enforceStatus\":\"$4\""
- if [ $# -eq 5 ]; then
- targetJson=$targetJson",\"reason\":\"$5\""
- fi
- targetJson=$targetJson"}"
- elif [ "$3" == "STD2" ]; then
- if [ $4 == "EMPTY" ]; then
- targetJson="{\"enforceStatus\":\"\""
- else
- targetJson="{\"enforceStatus\":\"$4\""
- fi
- if [ $# -eq 5 ]; then
- if [ $5 == "EMPTY" ]; then
- targetJson=$targetJson",\"enforceReason\":\"\""
- else
- targetJson=$targetJson",\"enforceReason\":\"$5\""
- fi
- fi
- targetJson=$targetJson"}"
- elif [ "$3" == "OSC" ]; then
- targetJson="{\"instance_status\":\"$4\""
- if [ $# -eq 5 ]; then
- targetJson=$targetJson",\"has_been_deleted\":\"$5\""
- fi
- targetJson=$targetJson",\"created_at\":\"????\"}"
- else
- __print_err "<response-code> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@
- return 1
- fi
-
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/policies/$UUID$2/status"
- targetJson="{\"last_modified\":\"????\",\"status\":$targetJson}"
- else
- query="/policy_status?id="$UUID$2
- fi
-
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
- if [ $# -gt 2 ]; then
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- body=${res:0:${#res}-3}
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
- __collect_endpoint_stats "PMS" 08 "GET" $PMS_API_PREFIX"/v2/policies/{policy_id}/status" $status
- __log_test_pass
- return 0
-}
-
-# API Test function: GET /policy_types and V2 GET /v2/policy-types
-# args: <response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]
-# (Function for test scripts)
-api_get_policy_types() {
- __log_test_start $@
-
- if [ $# -lt 1 ]; then
- __print_err "<response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]" $@
- return 1
- fi
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $# -eq 1 ]; then
- query="/v2/policy-types"
- elif [ $2 == "NORIC" ]; then
- query="/v2/policy-types"
- else
- query="/v2/policy-types?ric_id=$2"
- fi
- else
- if [ $# -eq 1 ]; then
- query="/policy_types"
- elif [ $2 == "NORIC" ]; then
- query="/policy_types"
- else
- query="/policy_types?ric=$2"
- fi
- fi
-
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -gt 2 ]; then
- body=${res:0:${#res}-3}
- targetJson="["
-
- for pid in ${@:3} ; do
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- if [ $pid == "EMPTY" ]; then
- pid=""
- fi
- targetJson=$targetJson"\"$pid\""
- done
-
- targetJson=$targetJson"]"
- if [ "$PMS_VERSION" == "V2" ]; then
- targetJson="{\"policytype_ids\": $targetJson }"
- fi
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
-
- __collect_endpoint_stats "PMS" 09 "GET" $PMS_API_PREFIX"/v2/policy-types" $status
- __log_test_pass
- return 0
-}
-
-#########################################################
-#### Test case functions Health check
-#########################################################
-
-# API Test function: GET /status and V2 GET /status
-# args: <response-code>
-# (Function for test scripts)
-api_get_status() {
- __log_test_start $@
- if [ $# -ne 1 ]; then
- __print_err "<response-code>" $@
- return 1
- fi
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/status"
- else
- query="/status"
- fi
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- __collect_endpoint_stats "PMS" 10 "GET" $PMS_API_PREFIX"/v2/status" $status
- __log_test_pass
- return 0
-}
-
-# API Test function: GET /status (root) without api prefix
-# args: <response-code>
-# (Function for test scripts)
-api_get_status_root() {
- __log_test_start $@
- if [ $# -ne 1 ]; then
- __print_err "<response-code>" $@
- return 1
- fi
- query="/status"
- TMP_PREFIX=$PMS_API_PREFIX
- PMS_API_PREFIX=""
- res="$(__do_curl_to_api PA GET $query)"
- PMS_API_PREFIX=$TMP_PREFIX
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- __collect_endpoint_stats "PMS" 19 "GET" "/status" $status
- __log_test_pass
- return 0
-}
-
-#########################################################
-#### Test case functions RIC Repository
-#########################################################
-
-# API Test function: GET /ric and V2 GET /v2/rics/ric
-# args: <reponse-code> <management-element-id> [<ric-id>]
-# (V2) args: <reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [<string-of-ricinfo>]
-# (V2) example of <string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4"
-# (V2) format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
-
-
-# (Function for test scripts)
-api_get_ric() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" == "V2" ]; then
- if [ $# -lt 3 ]; then
- __print_err "<reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [string-of-ricinfo>]" $@
- return 1
- fi
- search=""
- if [ $2 != "NOME" ]; then
- search="?managed_element_id="$2
- fi
- if [ $3 != "NORIC" ]; then
- if [ -z $search ]; then
- search="?ric_id="$3
- else
- search=$search"&ric_id="$3
- fi
- fi
- query="/v2/rics/ric"$search
-
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -gt 3 ]; then
- body=${res:0:${#res}-3}
- res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$4" )
- if [ $res -ne 0 ]; then
- __log_test_fail_general "Could not create target ric info json"
- return 1
- fi
-
- targetJson=$(<./tmp/.tmp_rics.json)
- targetJson=${targetJson:1:${#targetJson}-2} #remove array brackets
- echo " TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
- else
- if [ $# -lt 2 ] || [ $# -gt 3 ]; then
- __print_err "<reponse-code> <management-element-id> [<ric-id>]" $@
- return 1
- fi
-
- query="/ric?managedElementId="$2
-
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -eq 3 ]; then
- body=${res:0:${#res}-3}
- if [ "$body" != "$3" ]; then
- __log_test_fail_body
- return 1
- fi
- fi
- fi
-
- __collect_endpoint_stats "PMS" 11 "GET" $PMS_API_PREFIX"/v2/rics/ric" $status
- __log_test_pass
- return 0
-}
-
-# API test function: GET /rics and V2 GET /v2/rics
-# args: <reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]
-# example of <space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........."
-# format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids>
-# (Function for test scripts)
-api_get_rics() {
- __log_test_start $@
-
- if [ $# -lt 2 ]; then
- __print_err "<reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]" $@
- return 1
- fi
-
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/rics"
- if [ $2 != "NOTYPE" ]; then
- query="/v2/rics?policytype_id="$2
- fi
- else
- query="/rics"
- if [ $2 != "NOTYPE" ]; then
- query="/rics?policyType="$2
- fi
- fi
-
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -gt 2 ]; then
- body=${res:0:${#res}-3}
- if [ "$PMS_VERSION" == "V2" ]; then
- res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$3" )
- else
- res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V1" "$3" )
- fi
- if [ $res -ne 0 ]; then
- __log_test_fail_general "Could not create target ric info json"
- return 1
- fi
-
- targetJson=$(<./tmp/.tmp_rics.json)
- if [ "$PMS_VERSION" == "V2" ]; then
- targetJson="{\"rics\": $targetJson }"
- fi
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
-
- __collect_endpoint_stats "PMS" 12 "GET" $PMS_API_PREFIX"/v2/rics" $status
- __log_test_pass
- return 0
-}
-
-##################################################################
-#### API Test case functions Service registry and supervision ####
-##################################################################
-
-# API test function: PUT /service and V2 PUT /service
-# args: <response-code> <service-name> <keepalive-timeout> <callbackurl>
-# (Function for test scripts)
-api_put_service() {
- __log_test_start $@
- if [ $# -ne 4 ]; then
- __print_err "<response-code> <service-name> <keepalive-timeout> <callbackurl>" $@
- return 1
- fi
-
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/services"
- json="{\"callback_url\": \""$4"\",\"keep_alive_interval_seconds\": \""$3"\",\"service_id\": \""$2"\"}"
- else
- query="/service"
- json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}"
- fi
- file="./tmp/.tmp.json"
- echo "$json" > $file
-
- res="$(__do_curl_to_api PA PUT $query $file)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- __collect_endpoint_stats "PMS" 13 "PUT" $PMS_API_PREFIX"/v2/service" $status
- __log_test_pass
- return 0
-}
-
-# API test function: GET /services and V2 GET /v2/services
-#args: <response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]
-# (Function for test scripts)
-api_get_services() {
- __log_test_start $@
- #Number of accepted parameters: 1, 2, 4, 7, 10, 13,...
- paramError=1
- if [ $# -eq 1 ]; then
- paramError=0
- elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then
- paramError=0
- elif [ $# -eq 5 ]; then
- paramError=0
- elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then
- argLen=$(($#-2))
- if [ $(($argLen%3)) -eq 0 ]; then
- paramError=0
- fi
- fi
-
- if [ $paramError -ne 0 ]; then
- __print_err "<response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]" $@
- return 1
- fi
-
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/services"
-
- if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
- query="/v2/services?service_id="$2
- fi
- else
- query="/services"
-
- if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then
- query="/services?name="$2
- fi
- fi
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -gt 2 ]; then
- variableArgCount=$(($#-2))
- body=${res:0:${#res}-3}
- targetJson="["
- shift; shift;
- cntr=0
- while [ $cntr -lt $variableArgCount ]; do
- servicename=$1; shift;
- timeout=$1; shift;
- callback=$1; shift;
- if [ $cntr -gt 0 ]; then
- targetJson=$targetJson","
- fi
- # timeSinceLastActivitySeconds value cannot be checked since value varies
- if [ "$PMS_VERSION" == "V2" ]; then
- targetJson=$targetJson"{\"service_id\": \""$servicename"\",\"keep_alive_interval_seconds\": "$timeout",\"time_since_last_activity_seconds\":\"????\",\"callback_url\": \""$callback"\"}"
- else
- targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}"
- fi
- let cntr=cntr+3
- done
- targetJson=$targetJson"]"
- if [ "$PMS_VERSION" == "V2" ]; then
- targetJson="{\"service_list\": $targetJson }"
- fi
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
-
- __collect_endpoint_stats "PMS" 14 "GET" $PMS_API_PREFIX"/v2/services" $status
- __log_test_pass
- return 0
-}
-
-# API test function: GET /services V2 GET /v2/services - (only checking service names)
-# args: <response-code> [<service-name>]*"
-# (Function for test scripts)
-api_get_service_ids() {
- __log_test_start $@
-
- if [ $# -lt 1 ]; then
- __print_err "<response-code> [<service-name>]*" $@
- return 1
- fi
-
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/services"
- else
- query="/services"
- fi
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- body=${res:0:${#res}-3}
- targetJson="["
- for rapp in ${@:2} ; do
- if [ "$targetJson" != "[" ]; then
- targetJson=$targetJson","
- fi
- if [ "$PMS_VERSION" == "V2" ]; then
- targetJson=$targetJson"{\"callback_url\":\"????\",\"keep_alive_interval_seconds\":\"????\",\"service_id\":\""$rapp"\",\"time_since_last_activity_seconds\":\"????\"}"
- else
- targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}"
- fi
- done
-
- targetJson=$targetJson"]"
- if [ "$PMS_VERSION" == "V2" ]; then
- targetJson="{\"service_list\": $targetJson }"
- fi
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
-
- __collect_endpoint_stats "PMS" 14 "GET" $PMS_API_PREFIX"/v2/services" $status
- __log_test_pass
- return 0
-}
-
-# API test function: DELETE /services and V2 DELETE /v2/services/{serviceId}
-# args: <response-code> <service-name>
-# (Function for test scripts)
-api_delete_services() {
- __log_test_start $@
-
- if [ $# -ne 2 ]; then
- __print_err "<response-code> <service-name>" $@
- return 1
- fi
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/services/"$2
- else
- query="/services?name="$2
- fi
- res="$(__do_curl_to_api PA DELETE $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- __collect_endpoint_stats "PMS" 15 "DELETE" $PMS_API_PREFIX"/v2/services/{serviceId}" $status
- __log_test_pass
- return 0
-}
-
-# API test function: PUT /services/keepalive and V2 PUT /v2/services/{service_id}/keepalive
-# args: <response-code> <service-name>
-# (Function for test scripts)
-api_put_services_keepalive() {
- __log_test_start $@
-
- if [ $# -ne 2 ]; then
- __print_err "<response-code> <service-name>" $@
- return 1
- fi
- if [ "$PMS_VERSION" == "V2" ]; then
- query="/v2/services/$2/keepalive"
- else
- query="/services/keepalive?name="$2
- fi
-
- res="$(__do_curl_to_api PA PUT $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- __collect_endpoint_stats "PMS" 16 "PUT" $PMS_API_PREFIX"/v2/services/{service_id}/keepalive" $status
- __log_test_pass
- return 0
-}
-
-##################################################################
-#### API Test case functions Configuration ####
-##################################################################
-
-# API Test function: PUT /v2/configuration
-# args: <response-code> <config-file>
-# (Function for test scripts)
-api_put_configuration() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" != "V2" ]; then
- __log_test_fail_not_supported
- return 1
- fi
-
- if [ $# -ne 2 ]; then
- __print_err "<response-code> <config-file>" $@
- return 1
- fi
- if [ ! -f $2 ]; then
- __log_test_fail_general "Config file "$2", does not exist"
- return 1
- fi
- inputJson=$(< $2)
- if [ $RUNMODE == "DOCKER" ]; then #In kube the file already has a header
- inputJson="{\"config\":"$inputJson"}"
- fi
- file="./tmp/.config.json"
- echo $inputJson > $file
- query="/v2/configuration"
- res="$(__do_curl_to_api PA PUT $query $file)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- __collect_endpoint_stats "PMS" 17 "PUT" $PMS_API_PREFIX"/v2/configuration" $status
- __log_test_pass
- return 0
-}
-
-# API Test function: GET /v2/configuration
-# args: <response-code> [<config-file>]
-# (Function for test scripts)
-api_get_configuration() {
- __log_test_start $@
-
- if [ "$PMS_VERSION" != "V2" ]; then
- __log_test_fail_not_supported
- return 1
- fi
-
- if [ $# -lt 1 ] || [ $# -gt 2 ]; then
- __print_err "<response-code> [<config-file>]" $@
- return 1
- fi
- if [ ! -f $2 ]; then
- __log_test_fail_general "Config file "$2" for comparison, does not exist"
- return 1
- fi
-
- query="/v2/configuration"
- res="$(__do_curl_to_api PA GET $query)"
- status=${res:${#res}-3}
-
- if [ $status -ne $1 ]; then
- __log_test_fail_status_code $1 $status
- return 1
- fi
-
- if [ $# -eq 2 ]; then
-
- body=${res:0:${#res}-3}
-
- targetJson=$(< $2)
- targetJson="{\"config\":"$targetJson"}"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
-
- if [ $res -ne 0 ]; then
- __log_test_fail_body
- return 1
- fi
- fi
-
- __collect_endpoint_stats "PMS" 18 "GET" $PMS_API_PREFIX"/v2/configuration" $status
- __log_test_pass
- return 0
-}
-
-##########################################
-#### Reset types and instances ####
-##########################################
-
-# Admin reset to remove all policies and services
-# All types and instances etc are removed - types and instances in a1 sims need to be removed separately
-# NOTE - only works in kubernetes and the pod should not be running
-# args: -
-# (Function for test scripts)
-
-pms_kube_pvc_reset() {
- __log_test_start $@
-
- pvc_name=$(kubectl $KUBECONF get pvc -n $KUBE_NONRTRIC_NAMESPACE --no-headers -o custom-columns=":metadata.name" | grep policy)
- if [ -z "$pvc_name" ]; then
- pvc_name=policymanagementservice-vardata-pvc
- fi
- echo " Trying to reset pvc: "$pvc_name
- __kube_clean_pvc $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE $pvc_name $POLICY_AGENT_CONTAINER_MNT_DIR
-
- __log_test_pass
- return 0
-}
\ No newline at end of file
Code Review / nonrtric.git / blobdiff