+++ /dev/null
-#!/bin/bash
-
-# ============LICENSE_START===============================================
-# Copyright (C) 2020 Nordix Foundation. All rights reserved.
-# ========================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=================================================
-#
-
-# This is a script that contains container/service managemnt functions for Http Proxy
-
-################ Test engine functions ################
-
-# Create the image var used during the test
-# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
-# <image-tag-suffix> is present only for images with staging, snapshot,release tags
-__HTTPPROXY_imagesetup() {
- __check_and_create_image_var HTTPPROXY "HTTP_PROXY_IMAGE" "HTTP_PROXY_IMAGE_BASE" "HTTP_PROXY_IMAGE_TAG" LOCAL "$HTTP_PROXY_DISPLAY_NAME"
-}
-
-# Pull image from remote repo or use locally built image
-# arg: <pull-policy-override> <pull-policy-original>
-# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
-# <pull-policy-original> Shall be used for images that does not allow overriding
-# Both var may contain: 'remote', 'remote-remove' or 'local'
-__HTTPPROXY_imagepull() {
- __check_and_pull_image $2 "$HTTP_PROXY_DISPLAY_NAME" $HTTP_PROXY_APP_NAME HTTP_PROXY_IMAGE
-}
-
-# Build image (only for simulator or interfaces stubs owned by the test environment)
-# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
-# <image-tag-suffix> is present only for images with staging, snapshot,release tags
-__HTTPPROXY_imagebuild() {
- cd ../$HTTP_PROXY_BUILD_DIR # Note: Reusing same impl as for kube proxy
- echo " Building HTTPPROXY - $HTTP_PROXY_DISPLAY_NAME - image: $HTTP_PROXY_IMAGE"
- docker build --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $HTTP_PROXY_IMAGE . &> .dockererr
- if [ $? -eq 0 ]; then
- echo -e $GREEN" Build Ok"$EGREEN
- __retag_and_push_image HTTP_PROXY_IMAGE
- if [ $? -ne 0 ]; then
- exit 1
- fi
- else
- echo -e $RED" Build Failed"$ERED
- ((RES_CONF_FAIL++))
- cat .dockererr
- echo -e $RED"Exiting...."$ERED
- exit 1
- fi
-}
-
-# Generate a string for each included image using the app display name and a docker images format string
-# If a custom image repo is used then also the source image from the local repo is listed
-# arg: <docker-images-format-string> <file-to-append>
-__HTTPPROXY_image_data() {
- echo -e "$HTTP_PROXY_DISPLAY_NAME\t$(docker images --format $1 $HTTP_PROXY_IMAGE)" >> $2
- if [ ! -z "$HTTP_PROXY_IMAGE_SOURCE" ]; then
- echo -e "-- source image --\t$(docker images --format $1 $HTTP_PROXY_IMAGE_SOURCE)" >> $2
- fi
-}
-
-# Scale kubernetes resources to zero
-# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
-# This function is called for apps fully managed by the test script
-__HTTPPROXY_kube_scale_zero() {
- __kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest HTTPPROXY
-}
-
-# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
-# This function is called for prestarted apps not managed by the test script.
-__HTTPPROXY_kube_scale_zero_and_wait() {
- echo -e $RED" HTTPPROXY replicas kept as is"$ERED
-}
-
-# Delete all kube resouces for the app
-# This function is called for apps managed by the test script.
-__HTTPPROXY_kube_delete_all() {
- __kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest HTTPPROXY
-}
-
-# Store docker logs
-# This function is called for apps managed by the test script.
-# args: <log-dir> <file-prexix>
-__HTTPPROXY_store_docker_logs() {
- if [ $RUNMODE == "KUBE" ]; then
- kubectl logs -l "autotest=HTTPPROXY" -n $KUBE_SIM_NAMESPACE --tail=-1 > $1$2_httpproxy.log 2>&1
- else
- docker logs $HTTP_PROXY_APP_NAME > $1$2_httpproxy.log 2>&1
- fi
-}
-
-# Initial setup of protocol, host and ports
-# This function is called for apps managed by the test script.
-# args: -
-__HTTPPROXY_initial_setup() {
- :
-}
-
-# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
-# For docker, the namespace shall be excluded
-# This function is called for apps managed by the test script as well as for prestarted apps.
-# args: -
-__HTTPPROXY_statisics_setup() {
- if [ $RUNMODE == "KUBE" ]; then
- echo "HTTPPROXY $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE"
- else
- echo "HTTPPROXY $HTTP_PROXY_APP_NAME"
- fi
-}
-
-#######################################################
-
-
-## Access to Http Proxy Receiver
-# Host name may be changed if app started by kube
-# Direct access from script
-HTTP_PROXY_HTTPX="http"
-HTTP_PROXY_HOST_NAME=$LOCALHOST_NAME
-HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_PORT
-
-#########################
-### Http Proxy functions
-#########################
-
-# All calls to httpproxy will be directed to the http interface
-# args: -
-# (Function for test scripts)
-use_http_proxy_http() {
- echo -e $BOLD"$HTTP_PROXY_DISPLAY_NAME protocol setting"$EBOLD
- echo -e " Using $BOLD http $EBOLD"
- HTTP_PROXY_HTTPX="http"
- HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_PORT
-
- echo ""
-}
-
-# All calls to httpproxy will be directed to the https interface
-# args: -
-# (Function for test scripts)
-use_http_proxy_https() {
- echo -e $BOLD"$HTTP_PROXY_DISPLAY_NAME protocol setting"$EBOLD
- echo -e " Using $BOLD https $EBOLD"
- HTTP_PROXY_HTTPX="https"
- HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_SECURE_PORT
-
- echo ""
-}
-
-# Start the Http Proxy in the simulator group
-# args: -
-# (Function for test scripts)
-start_http_proxy() {
-
- echo -e $BOLD"Starting $HTTP_PROXY_DISPLAY_NAME"$EBOLD
-
- if [ $RUNMODE == "KUBE" ]; then
-
- # Check if app shall be fully managed by the test script
- __check_included_image "HTTPPROXY"
- retcode_i=$?
-
- # Check if app shall only be used by the testscipt
- __check_prestarted_image "HTTPPROXY"
- retcode_p=$?
-
- if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
- echo -e $RED"The $HTTP_PROXY_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
- echo -e $RED"The $HTTP_PROXY_APP_NAME will not be started"$ERED
- exit
- fi
- if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
- echo -e $RED"The $HTTP_PROXY_APP_NAME app is included both as managed and prestarted in this test script"$ERED
- echo -e $RED"The $HTTP_PROXY_APP_NAME will not be started"$ERED
- exit
- fi
-
- # Check if app shall be used - not managed - by the test script
- if [ $retcode_p -eq 0 ]; then
- echo -e " Using existing $HTTP_PROXY_APP_NAME deployment and service"
- echo " Setting HTTPPROXY replicas=1"
- __kube_scale deployment $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE 1
- fi
-
- if [ $retcode_i -eq 0 ]; then
- echo -e " Creating $HTTP_PROXY_APP_NAME deployment and service"
- export HTTP_PROXY_APP_NAME
-
- export HTTP_PROXY_WEB_EXTERNAL_PORT
- export HTTP_PROXY_WEB_INTERNAL_PORT
- export HTTP_PROXY_EXTERNAL_PORT
- export HTTP_PROXY_INTERNAL_PORT
-
- export HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
- export HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
- export HTTP_PROXY_EXTERNAL_SECURE_PORT
- export HTTP_PROXY_INTERNAL_SECURE_PORT
-
- export KUBE_SIM_NAMESPACE
- export HTTP_PROXY_IMAGE
-
- __kube_create_namespace $KUBE_SIM_NAMESPACE
-
- # Create service
- input_yaml=$SIM_GROUP"/"$HTTP_PROXY_COMPOSE_DIR"/"svc.yaml
- output_yaml=$PWD/tmp/proxy_svc.yaml
- __kube_create_instance service $HTTP_PROXY_APP_NAME $input_yaml $output_yaml
-
- # Create app
- input_yaml=$SIM_GROUP"/"$HTTP_PROXY_COMPOSE_DIR"/"app.yaml
- output_yaml=$PWD/tmp/proxy_app.yaml
- __kube_create_instance app $HTTP_PROXY_APP_NAME $input_yaml $output_yaml
-
- fi
-
- echo " Retrieving host and ports for service..."
- HTTP_PROXY_HOST_NAME=$(__kube_get_service_host $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE)
- HTTP_PROXY_WEB_EXTERNAL_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "web")
- HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "webs")
-
- HTTP_PROXY_EXTERNAL_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "http")
- HTTP_PROXY_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "https")
-
- if [ $HTTP_PROXY_HTTPX == "http" ]; then
- HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_PORT
- HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_EXTERNAL_PORT
- HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME"."$KUBE_SIM_NAMESPACE
-
- echo " Host IP, http port: $HTTP_PROXY_HOST_NAME $HTTP_PROXY_WEB_EXTERNAL_PORT"
- else
- HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
- HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_EXTERNAL_SECURE_PORT
- HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME"."$KUBE_SIM_NAMESPACE
-
- echo " Host IP, https port: $HTTP_PROXY_HOST_NAME $HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT"
- fi
-
- __check_service_start $HTTP_PROXY_APP_NAME $HTTP_PROXY_PATH$HTTP_PROXY_ALIVE_URL
-
- else
- # Check if docker app shall be fully managed by the test script
- __check_included_image 'HTTPPROXY'
- if [ $? -eq 1 ]; then
- echo -e $RED"The Http Proxy app is not included in this test script"$ERED
- echo -e $RED"The Http Proxy will not be started"$ERED
- exit
- fi
-
- export HTTP_PROXY_APP_NAME
- export HTTP_PROXY_EXTERNAL_PORT
- export HTTP_PROXY_INTERNAL_PORT
- export HTTP_PROXY_EXTERNAL_SECURE_PORT
- export HTTP_PROXY_INTERNAL_SECURE_PORT
- export HTTP_PROXY_WEB_EXTERNAL_PORT
- export HTTP_PROXY_WEB_INTERNAL_PORT
- export HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
- export HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
- export DOCKER_SIM_NWNAME
-
- export HTTP_PROXY_DISPLAY_NAME
-
- __start_container $HTTP_PROXY_COMPOSE_DIR "" NODOCKERARGS 1 $HTTP_PROXY_APP_NAME
-
- if [ $HTTP_PROXY_HTTPX == "http" ]; then
- HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_INTERNAL_PORT
- else
- HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
- fi
- __check_service_start $HTTP_PROXY_APP_NAME $HTTP_PROXY_PATH$HTTP_PROXY_ALIVE_URL
-
- if [ $HTTP_PROXY_HTTPX == "http" ]; then
- HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_INTERNAL_PORT
- else
- HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_INTERNAL_SECURE_PORT
- fi
- HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME
-
- fi
- echo ""
-}
-