# <pull-policy-original> Shall be used for images that does not allow overriding
# Both var may contain: 'remote', 'remote-remove' or 'local'
__CR_imagepull() {
- echo -e $RED" Image for app CR shall never be pulled from remove repo"$ERED
+ echo -e $RED" Image for app CR shall never be pulled from remote repo"$ERED
}
# Build image (only for simulator or interfaces stubs owned by the test environment)
# This function is called for apps managed by the test script.
# args: <log-dir> <file-prexix>
__CR_store_docker_logs() {
- docker logs $CR_APP_NAME > $1$2_cr.log 2>&1
+ if [ $RUNMODE == "KUBE" ]; then
+ for podname in $(kubectl $KUBECONF get pods -n $KUBE_SIM_NAMESPACE -l "autotest=CR" -o custom-columns=":metadata.name"); do
+ kubectl $KUBECONF logs -n $KUBE_SIM_NAMESPACE $podname --tail=-1 > $1$2_$podname.log 2>&1
+ done
+ else
+ crs=$(docker ps --filter "name=$CR_APP_NAME" --filter "network=$DOCKER_SIM_NWNAME" --filter "status=running" --format {{.Names}})
+ for crid in $crs; do
+ docker logs $crid > $1$2_$crid.log 2>&1
+ done
+ fi
}
-#######################################################
+# Initial setup of protocol, host and ports
+# This function is called for apps managed by the test script.
+# args: -
+__CR_initial_setup() {
+ use_cr_http
+}
+# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
+# For docker, the namespace shall be excluded
+# This function is called for apps managed by the test script as well as for prestarted apps.
+# args: -
+__CR_statisics_setup() {
+ for ((CR_INSTANCE=MAX_CR_APP_COUNT; CR_INSTANCE>0; CR_INSTANCE-- )); do
+ if [ $RUNMODE == "KUBE" ]; then
+ CR_INSTANCE_KUBE=$(($CR_INSTANCE-1))
+ echo -n " CR-$CR_INSTANCE_KUBE $CR_APP_NAME-$CR_INSTANCE_KUBE $KUBE_SIM_NAMESPACE "
+ else
+ if [ $DOCKER_COMPOSE_VERSION == "V1" ]; then
+ echo -n " CR_$CR_INSTANCE ${CR_APP_NAME}_cr_$CR_INSTANCE "
+ else
+ echo -n " CR_$CR_INSTANCE ${CR_APP_NAME}-cr-$CR_INSTANCE "
+ fi
+ fi
+ done
+}
-## Access to Callback Receiver
-# Host name may be changed if app started by kube
-# Direct access from script
-CR_HTTPX="http"
-CR_HOST_NAME=$LOCALHOST_NAME
-CR_PATH=$CR_HTTPX"://"$CR_HOST_NAME":"$CR_EXTERNAL_PORT
-#Docker/Kube internal path
-if [ $RUNMODE == "KUBE" ]; then
- CR_SERVICE_PATH=$CR_HTTPX"://"$CR_APP_NAME"."$KUBE_SIM_NAMESPACE":"$CR_EXTERNAL_PORT$CR_APP_CALLBACK
-else
- CR_SERVICE_PATH=$CR_HTTPX"://"$CR_APP_NAME":"$CR_INTERNAL_PORT$CR_APP_CALLBACK
-fi
-# CR_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
-CR_ADAPTER_TYPE="REST"
-CR_ADAPTER=$CR_PATH
+# Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
+# args: -
+__CR_test_requirements() {
+ :
+}
+
+#######################################################
################
### CR functions
################
-# Set http as the protocol to use for all communication to the Callback Receiver
+#Var to hold the current number of CR instances
+CR_APP_COUNT=1
+MAX_CR_APP_COUNT=10
+
+# Set http as the protocol to use for all communication to the Dmaap adapter
# args: -
# (Function for test scripts)
use_cr_http() {
- echo -e $BOLD"CR protocol setting"$EBOLD
- echo -e " Using $BOLD http $EBOLD towards CR"
-
- CR_HTTPX="http"
- CR_PATH=$CR_HTTPX"://"$CR_HOST_NAME":"$CR_EXTERNAL_PORT
-
- #Docker/Kube internal path
- if [ $RUNMODE == "KUBE" ]; then
- CR_SERVICE_PATH=$CR_HTTPX"://"$CR_APP_NAME"."$KUBE_SIM_NAMESPACE":"$CR_EXTERNAL_PORT$CR_APP_CALLBACK
- else
- CR_SERVICE_PATH=$CR_HTTPX"://"$CR_APP_NAME":"$CR_INTERNAL_PORT$CR_APP_CALLBACK
- fi
- CR_ADAPTER_TYPE="REST"
- CR_ADAPTER=$CR_PATH
- echo ""
+ __cr_set_protocoll "http" $CR_INTERNAL_PORT $CR_EXTERNAL_PORT
}
-# Set https as the protocol to use for all communication to the Callback Receiver
+# Set https as the protocol to use for all communication to the Dmaap adapter
# args: -
# (Function for test scripts)
use_cr_https() {
- echo -e $BOLD"CR protocol setting"$EBOLD
- echo -e " Using $BOLD https $EBOLD towards CR"
+ __cr_set_protocoll "https" $CR_INTERNAL_SECURE_PORT $CR_EXTERNAL_SECURE_PORT
+}
- CR_HTTPX="https"
- CR_PATH=$CR_HTTPX"://"$CR_HOST_NAME":"$CR_EXTERNAL_SECURE_PORT
+# Setup paths to svc/container for internal and external access
+# args: <protocol> <internal-port> <external-port>
+__cr_set_protocoll() {
+
+ echo -e $BOLD"$CR_DISPLAY_NAME protocol setting"$EBOLD
+ echo -e " Using $BOLD $1 $EBOLD towards $CR_DISPLAY_NAME"
+ ## Access to Dmaap adapter
+ for ((CR_INSTANCE=0; CR_INSTANCE<$MAX_CR_APP_COUNT; CR_INSTANCE++ )); do
+ CR_DOCKER_INSTANCE=$(($CR_INSTANCE+1))
+ # CR_SERVICE_PATH is the base path to cr
+ if [ $DOCKER_COMPOSE_VERSION == "V1" ]; then
+ __CR_SERVICE_PATH=$1"://"$CR_APP_NAME"_cr_"${CR_DOCKER_INSTANCE}":"$2 # docker access, container->container and script->container via proxy
+ else
+ __CR_SERVICE_PATH=$1"://"$CR_APP_NAME"-cr-"${CR_DOCKER_INSTANCE}":"$2 # docker access, container->container and script->container via proxy
+ fi
+ if [ $RUNMODE == "KUBE" ]; then
+ __CR_SERVICE_PATH=$1"://"$CR_APP_NAME"-"$CR_INSTANCE.$CR_APP_NAME"."$KUBE_SIM_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
+ fi
+ export CR_SERVICE_PATH"_"${CR_INSTANCE}=$__CR_SERVICE_PATH
+ # Service paths are used in test script to provide callbacck urls to app
+ export CR_SERVICE_MR_PATH"_"${CR_INSTANCE}=$__CR_SERVICE_PATH$CR_APP_CALLBACK_MR #Only for messages from dmaap adapter/mediator
+ export CR_SERVICE_TEXT_PATH"_"${CR_INSTANCE}=$__CR_SERVICE_PATH$CR_APP_CALLBACK_TEXT #Callbacks for text payload
+ export CR_SERVICE_APP_PATH"_"${CR_INSTANCE}=$__CR_SERVICE_PATH$CR_APP_CALLBACK #For general callbacks from apps
+
+ if [ $CR_INSTANCE -eq 0 ]; then
+ # CR_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
+ # CR_ADDAPTER need to be set before each call to CR....only set for instance 0 here
+ CR_ADAPTER_TYPE="REST"
+ CR_ADAPTER=$__CR_SERVICE_PATH
+ fi
+ done
+ echo ""
+}
- if [ $RUNMODE == "KUBE" ]; then
- CR_SERVICE_PATH=$CR_HTTPX"://"$CR_APP_NAME"."$KUBE_SIM_NAMESPACE":"$CR_EXTERNAL_SECURE_PORT$CR_APP_CALLBACK
- else
- CR_SERVICE_PATH=$CR_HTTPX"://"$CR_APP_NAME":"$CR_INTERNAL_SECURE_PORT$CR_APP_CALLBACK
- fi
+# Export env vars for config files, docker compose and kube resources
+# args: <proxy-flag>
+__cr_export_vars() {
+ export CR_APP_NAME
+ export CR_DISPLAY_NAME
- CR_ADAPTER_TYPE="REST"
- CR_ADAPTER=$CR_PATH
- echo ""
+ export KUBE_SIM_NAMESPACE
+ export DOCKER_SIM_NWNAME
+
+ export CR_IMAGE
+
+ export CR_INTERNAL_PORT
+ export CR_INTERNAL_SECURE_PORT
+ export CR_EXTERNAL_PORT
+ export CR_EXTERNAL_SECURE_PORT
+
+ export CR_APP_COUNT
}
# Start the Callback reciver in the simulator group
-# args: -
+# args: <app-count>
# (Function for test scripts)
start_cr() {
echo -e $BOLD"Starting $CR_DISPLAY_NAME"$EBOLD
+ if [ $# -ne 1 ]; then
+ echo -e $RED" Number of CR instances missing, usage: start_cr <app-count>"$ERED
+ exit 1
+ fi
+ if [ $1 -lt 1 ] || [ $1 -gt 10 ]; then
+ echo -e $RED" Number of CR shall be 1...10, usage: start_cr <app-count>"$ERED
+ exit 1
+ fi
+ export CR_APP_COUNT=$1
+
if [ $RUNMODE == "KUBE" ]; then
# Check if app shall be fully managed by the test script
if [ $retcode_i -eq 0 ]; then
echo -e " Creating $CR_APP_NAME deployment and service"
- export CR_APP_NAME
- export KUBE_SIM_NAMESPACE
- export CR_IMAGE
- export CR_INTERNAL_PORT
- export CR_INTERNAL_SECURE_PORT
- export CR_EXTERNAL_PORT
- export CR_EXTERNAL_SECURE_PORT
+
+ __cr_export_vars
__kube_create_namespace $KUBE_SIM_NAMESPACE
fi
- echo " Retrieving host and ports for service..."
- CR_HOST_NAME=$(__kube_get_service_host $CR_APP_NAME $KUBE_SIM_NAMESPACE)
-
- CR_EXTERNAL_PORT=$(__kube_get_service_port $CR_APP_NAME $KUBE_SIM_NAMESPACE "http")
- CR_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $CR_APP_NAME $KUBE_SIM_NAMESPACE "https")
-
- echo " Host IP, http port, https port: $CR_HOST_NAME $CR_EXTERNAL_PORT $CR_EXTERNAL_SECURE_PORT"
- if [ $CR_HTTPX == "http" ]; then
- CR_PATH=$CR_HTTPX"://"$CR_HOST_NAME":"$CR_EXTERNAL_PORT
- CR_SERVICE_PATH=$CR_HTTPX"://"$CR_APP_NAME"."$KUBE_SIM_NAMESPACE":"$CR_EXTERNAL_PORT$CR_APP_CALLBACK
- else
- CR_PATH=$CR_HTTPX"://"$CR_HOST_NAME":"$CR_EXTERNAL_SECURE_PORT
- CR_SERVICE_PATH=$CR_HTTPX"://"$CR_APP_NAME"."$KUBE_SIM_NAMESPACE":"$CR_EXTERNAL_SECURE_PORT$CR_APP_CALLBACK
- fi
- if [ $CR_ADAPTER_TYPE == "REST" ]; then
- CR_ADAPTER=$CR_PATH
- fi
+ for ((CR_INSTANCE=0; CR_INSTANCE<$CR_APP_COUNT; CR_INSTANCE++ )); do
+ __dynvar="CR_SERVICE_PATH_"$CR_INSTANCE
+ __cr_app_name=$CR_APP_NAME"-"$CR_INSTANCE
+ __check_service_start $__cr_app_name ${!__dynvar}$CR_ALIVE_URL
+ result=$(__do_curl ${!__dynvar}/reset)
+ done
- __check_service_start $CR_APP_NAME $CR_PATH$CR_ALIVE_URL
-
- echo -ne " Service $CR_APP_NAME - reset "$SAMELINE
- result=$(__do_curl $CR_APP_NAME $CR_PATH/reset)
- if [ $? -ne 0 ]; then
- echo -e " Service $CR_APP_NAME - reset $RED Failed $ERED - will continue"
- else
- echo -e " Service $CR_APP_NAME - reset $GREEN OK $EGREEN"
- fi
else
# Check if docker app shall be fully managed by the test script
__check_included_image 'CR'
exit
fi
- export CR_APP_NAME
- export CR_INTERNAL_PORT
- export CR_EXTERNAL_PORT
- export CR_INTERNAL_SECURE_PORT
- export CR_EXTERNAL_SECURE_PORT
- export DOCKER_SIM_NWNAME
- export CR_DISPLAY_NAME
-
- __start_container $CR_COMPOSE_DIR "" NODOCKERARGS 1 $CR_APP_NAME
-
- __check_service_start $CR_APP_NAME $CR_PATH$CR_ALIVE_URL
+ __cr_export_vars
+
+ app_data=""
+ cntr=1
+ while [ $cntr -le $CR_APP_COUNT ]; do
+ if [ $DOCKER_COMPOSE_VERSION == "V1" ]; then
+ app=$CR_APP_NAME"_cr_"$cntr
+ else
+ app=$CR_APP_NAME"-cr-"$cntr
+ fi
+ app_data="$app_data $app"
+ let cntr=cntr+1
+ done
+
+ echo "COMPOSE_PROJECT_NAME="$CR_APP_NAME > $SIM_GROUP/$CR_COMPOSE_DIR/.env
+
+ __start_container $CR_COMPOSE_DIR "" NODOCKERARGS $CR_APP_COUNT $app_data
+
+ cntr=1 #Counter for docker instance, starts on 1
+ cntr2=0 #Couter for env var name, starts with 0 to be compablible with kube
+ while [ $cntr -le $CR_APP_COUNT ]; do
+ if [ $DOCKER_COMPOSE_VERSION == "V1" ]; then
+ app=$CR_APP_NAME"_cr_"$cntr
+ else
+ app=$CR_APP_NAME"-cr-"$cntr
+ fi
+ __dynvar="CR_SERVICE_PATH_"$cntr2
+ __check_service_start $app ${!__dynvar}$CR_ALIVE_URL
+ let cntr=cntr+1
+ let cntr2=cntr2+1
+ done
fi
echo ""
}
+#Convert a cr path id to the value of the environment var holding the url
+# arg: <cr-path-id>
+# returns: <base-url-to-the-app>
+__cr_get_service_path(){
+ if [ $# -ne 1 ]; then
+ echo "DUMMY"
+ return 1
+ fi
+ if [ $1 -lt 0 ] || [ $1 -ge $MAX_CR_APP_COUNT ]; then
+ echo "DUMMY"
+ return 1
+ fi
+ __dynvar="CR_SERVICE_PATH_"$1
+ echo ${!__dynvar}
+ return 0
+}
# Tests if a variable value in the CR is equal to a target value and and optional timeout.
# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
# equal to the target or not.
-# Arg: <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
+# Arg: <cr-path-id> <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
# before setting pass or fail depending on if the variable value becomes equal to the target
# value or not.
# (Function for test scripts)
cr_equal() {
- if [ $# -eq 2 ] || [ $# -eq 3 ]; then
- __var_test "CR" "$CR_PATH/counter/" $1 "=" $2 $3
+ if [ $# -eq 3 ] || [ $# -eq 4 ]; then
+ CR_SERVICE_PATH=$(__cr_get_service_path $1)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+ __var_test "CR" "$CR_SERVICE_PATH/counter/" $2 "=" $3 $4
+ else
+ __print_err "Wrong args to cr_equal, needs three or four args: <cr-path-id> <variable-name> <target-value> [ timeout ]" $@
+ fi
+}
+
+# Tests if a variable value in the CR is equal to or greater than the target value and and optional timeout.
+# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable is
+# equal to the target or not.
+# Arg: <cr-path-id> <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
+# before setting pass or fail depending on if the variable value becomes equal to or greater than the target
+# value or not.
+# (Function for test scripts)
+cr_greater_or_equal() {
+ if [ $# -eq 3 ] || [ $# -eq 4 ]; then
+ CR_SERVICE_PATH=$(__cr_get_service_path $1)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+ __var_test "CR" "$CR_SERVICE_PATH/counter/" $2 ">=" $3 $4
+ else
+ __print_err "Wrong args to cr_equal, needs three or four args: <cr-path-id> <variable-name> <target-value> [ timeout ]" $@
+ fi
+}
+
+# Tests if a variable value in the CR contains the target string and and optional timeout
+# Arg: <variable-name> <target-value> - This test set pass or fail depending on if the variable contains
+# the target or not.
+# Arg: <cr-path-id> <variable-name> <target-value> <timeout-in-sec> - This test waits up to the timeout seconds
+# before setting pass or fail depending on if the variable value contains the target
+# value or not.
+# (Function for test scripts)
+cr_contains_str() {
+
+ if [ $# -eq 3 ] || [ $# -eq 4 ]; then
+ CR_SERVICE_PATH=$(__cr_get_service_path $1)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+ __var_test "CR" "$CR_SERVICE_PATH/counter/" $2 "contain_str" $3 $4
+ return 0
else
- __print_err "Wrong args to cr_equal, needs two or three args: <sim-param> <target-value> [ timeout ]" $@
+ __print_err "needs two or three args: <cr-path-id> <variable-name> <target-value> [ timeout ]"
+ return 1
+ fi
+}
+
+# Read a variable value from CR sim and send to stdout. Arg: <cr-path-id> <variable-name>
+cr_read() {
+ CR_SERVICE_PATH=$(__cr_get_service_path $1)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+ echo "$(__do_curl $CR_SERVICE_PATH/counter/$2)"
+}
+
+# Function to configure write delay on callbacks
+# Delay given in seconds.
+# arg <response-code> <cr-path-id> <delay-in-sec>
+# (Function for test scripts)
+cr_delay_callback() {
+ __log_conf_start $@
+
+ if [ $# -ne 3 ]; then
+ __print_err "<response-code> <cr-path-id> <delay-in-sec>]" $@
+ return 1
fi
+
+ CR_SERVICE_PATH=$(__cr_get_service_path $2)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ res="$(__do_curl_to_api CR POST /forcedelay?delay=$3)"
+ status=${res:${#res}-3}
+
+ if [ $status -ne 200 ]; then
+ __log_conf_fail_status_code $1 $status
+ return 1
+ fi
+
+ __log_conf_ok
+ return 0
}
-# CR API: Check the contents of all current ric sync events for one id from PMS
-# <response-code> <id> [ EMPTY | ( <ric-id> )+ ]
+# CR API: Check the contents of all current ric sync events for one id from A1PMS
+# <response-code> <cr-path-id> <id> [ EMPTY | ( <ric-id> )+ ]
# (Function for test scripts)
cr_api_check_all_sync_events() {
__log_test_start $@
- if [ "$PMS_VERSION" != "V2" ]; then
+ if [ "$A1PMS_VERSION" != "V2" ]; then
__log_test_fail_not_supported
return 1
fi
- if [ $# -lt 2 ]; then
- __print_err "<response-code> <id> [ EMPTY | ( <ric-id> )+ ]" $@
+ if [ $# -lt 3 ]; then
+ __print_err "<response-code> <cr-path-id> <id> [ EMPTY | ( <ric-id> )+ ]" $@
return 1
fi
- query="/get-all-events/"$2
+ CR_SERVICE_PATH=$(__cr_get_service_path $2)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ query="/get-all-events/"$3
res="$(__do_curl_to_api CR GET $query)"
status=${res:${#res}-3}
return 1
fi
- if [ $# -gt 2 ]; then
+ if [ $# -gt 3 ]; then
body=${res:0:${#res}-3}
- if [ $# -eq 3 ] && [ $3 == "EMPTY" ]; then
+ if [ $# -eq 4 ] && [ $4 == "EMPTY" ]; then
targetJson="["
else
targetJson="["
- arr=(${@:3})
+ arr=(${@:4})
- for ((i=0; i<$(($#-2)); i=i+1)); do
+ for ((i=0; i<$(($#-3)); i=i+1)); do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
return 0
}
-# CR API: Check the contents of all current status events for one id from ECS
-# <response-code> <id> [ EMPTY | ( <status> )+ ]
+# CR API: Check the contents of all current status events for one id from ICS
+# <response-code> <cr-path-id> <id> [ EMPTY | ( <status> )+ ]
# (Function for test scripts)
-cr_api_check_all_ecs_events() {
+cr_api_check_all_ics_events() {
__log_test_start $@
- if [ $# -lt 2 ]; then
- __print_err "<response-code> <id> [ EMPTY | ( <status> )+ ]" $@
+ if [ $# -lt 3 ]; then
+ __print_err "<response-code> <cr-path-id> <id> [ EMPTY | ( <status> )+ ]" $@
return 1
fi
- query="/get-all-events/"$2
+ CR_SERVICE_PATH=$(__cr_get_service_path $2)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ query="/get-all-events/"$3
res="$(__do_curl_to_api CR GET $query)"
status=${res:${#res}-3}
return 1
fi
- if [ $# -gt 2 ]; then
+ if [ $# -gt 3 ]; then
body=${res:0:${#res}-3}
- if [ $# -eq 3 ] && [ $3 == "EMPTY" ]; then
+ if [ $# -eq 4 ] && [ $4 == "EMPTY" ]; then
targetJson="["
else
targetJson="["
- arr=(${@:3})
+ arr=(${@:4})
- for ((i=0; i<$(($#-2)); i=i+1)); do
+ for ((i=0; i<$(($#-3)); i=i+1)); do
if [ "$targetJson" != "[" ]; then
targetJson=$targetJson","
return 1
fi
fi
+ __log_test_pass
+ return 0
+}
+
+# CR API: Check the contents of all current type subscription events for one id from ICS
+# <response-code> <cr-path-id> <id> [ EMPTY | ( <type-id> <schema> <registration-status> )+ ]
+# (Function for test scripts)
+cr_api_check_all_ics_subscription_events() {
+ __log_test_start $@
+
+ #Valid number of parameter 3,4,8,12
+ paramError=1
+ if [ $# -eq 3 ]; then
+ paramError=0
+ fi
+ if [ $# -eq 4 ] && [ "$4" == "EMPTY" ]; then
+ paramError=0
+ fi
+ variablecount=$(($#-3))
+ if [ $# -gt 4 ] && [ $(($variablecount%3)) -eq 0 ]; then
+ paramError=0
+ fi
+ if [ $paramError -eq 1 ]; then
+ __print_err "<response-code> <cr-path-id> <id> [ EMPTY | ( <type-id> <schema> <registration-status> )+ ]" $@
+ return 1
+ fi
+
+ CR_SERVICE_PATH=$(__cr_get_service_path $2)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ query="/get-all-events/"$3
+ res="$(__do_curl_to_api CR GET $query)"
+ status=${res:${#res}-3}
+
+ if [ $status -ne $1 ]; then
+ __log_test_fail_status_code $1 $status
+ return 1
+ fi
+
+ if [ $# -gt 3 ]; then
+ body=${res:0:${#res}-3}
+ targetJson="["
+ if [ $# -gt 4 ]; then
+ arr=(${@:4})
+ for ((i=0; i<$(($#-4)); i=i+3)); do
+ if [ "$targetJson" != "[" ]; then
+ targetJson=$targetJson","
+ fi
+ if [ -f ${arr[$i+1]} ]; then
+ jobfile=$(cat ${arr[$i+1]})
+ else
+ __log_test_fail_general "Job schema file "${arr[$i+1]}", does not exist"
+ return 1
+ fi
+ targetJson=$targetJson"{\"info_type_id\":\"${arr[$i]}\",\"job_data_schema\":$jobfile,\"status\":\"${arr[$i+2]}\"}"
+ done
+ fi
+ targetJson=$targetJson"]"
+
+ echo " TARGET JSON: $targetJson" >> $HTTPLOG
+ res=$(python3 ../common/compare_json.py "$targetJson" "$body")
+
+ if [ $res -ne 0 ]; then
+ __log_test_fail_body
+ return 1
+ fi
+ fi
+
+ __log_test_pass
+ return 0
+}
+
+
+# CR API: Reset all events and counters
+# Arg: <cr-path-id>
+# (Function for test scripts)
+cr_api_reset() {
+ __log_conf_start $@
+
+ if [ $# -ne 1 ]; then
+ __print_err "<cr-path-id>" $@
+ return 1
+ fi
+
+ CR_SERVICE_PATH=$(__cr_get_service_path $1)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ res="$(__do_curl_to_api CR GET /reset)"
+ status=${res:${#res}-3}
+
+ if [ $status -ne 200 ]; then
+ __log_conf_fail_status_code $1 $status
+ return 1
+ fi
+
+ __log_conf_ok
+ return 0
+}
+
+
+# CR API: Check the contents of all json events for path
+# <response-code> <cr-path-id> <topic-url> (EMPTY | <json-msg>+ )
+# (Function for test scripts)
+cr_api_check_all_genric_json_events() {
+ __log_test_start $@
+
+ if [ $# -lt 4 ]; then
+ __print_err "<response-code> <cr-path-id> <topic-url> (EMPTY | <json-msg>+ )" $@
+ return 1
+ fi
+
+ CR_SERVICE_PATH=$(__cr_get_service_path $2)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ query="/get-all-events/"$3
+ res="$(__do_curl_to_api CR GET $query)"
+ status=${res:${#res}-3}
+
+ if [ $status -ne $1 ]; then
+ __log_test_fail_status_code $1 $status
+ return 1
+ fi
+ body=${res:0:${#res}-3}
+ targetJson="["
+
+ if [ $4 != "EMPTY" ]; then
+ shift
+ shift
+ shift
+ while [ $# -gt 0 ]; do
+ if [ "$targetJson" != "[" ]; then
+ targetJson=$targetJson","
+ fi
+ targetJson=$targetJson$1
+ shift
+ done
+ fi
+ targetJson=$targetJson"]"
+
+ echo " TARGET JSON: $targetJson" >> $HTTPLOG
+ res=$(python3 ../common/compare_json.py "$targetJson" "$body")
+
+ if [ $res -ne 0 ]; then
+ __log_test_fail_body
+ return 1
+ fi
+
+ __log_test_pass
+ return 0
+}
+
+
+# CR API: Check a single (oldest) json event (or none if empty) for path
+# <response-code> <cr-path-id> <topic-url> (EMPTY | <json-msg> )
+# (Function for test scripts)
+cr_api_check_single_genric_json_event() {
+ __log_test_start $@
+
+ if [ $# -ne 4 ]; then
+ __print_err "<response-code> <cr-path-id> <topic-url> (EMPTY | <json-msg> )" $@
+ return 1
+ fi
+
+ CR_SERVICE_PATH=$(__cr_get_service_path $2)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ query="/get-event/"$3
+ res="$(__do_curl_to_api CR GET $query)"
+ status=${res:${#res}-3}
+
+ if [ $status -ne $1 ]; then
+ __log_test_fail_status_code $1 $status
+ return 1
+ fi
+ body=${res:0:${#res}-3}
+ targetJson=$4
+
+ if [ $targetJson == "EMPTY" ] && [ ${#body} -ne 0 ]; then
+ __log_test_fail_body
+ return 1
+ fi
+ echo " TARGET JSON: $targetJson" >> $HTTPLOG
+ res=$(python3 ../common/compare_json.py "$targetJson" "$body")
+
+ if [ $res -ne 0 ]; then
+ __log_test_fail_body
+ return 1
+ fi
+
+ __log_test_pass
+ return 0
+}
+
+# CR API: Check a single (oldest) json in md5 format (or none if empty) for path.
+# Note that if a json message is given, it shall be compact, no ws except inside string.
+# The MD5 will generate different hash if ws is present or not in otherwise equivalent json
+# arg: <response-code> <cr-path-id> <topic-url> (EMPTY | <data-msg> )
+# (Function for test scripts)
+cr_api_check_single_genric_event_md5() {
+ __log_test_start $@
+
+ if [ $# -ne 4 ]; then
+ __print_err "<response-code> <cr-path-id> <topic-url> (EMPTY | <data-msg> )" $@
+ return 1
+ fi
+
+ CR_SERVICE_PATH=$(__cr_get_service_path $2)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ query="/get-event/"$3
+ res="$(__do_curl_to_api CR GET $query)"
+ status=${res:${#res}-3}
+
+ if [ $status -ne $1 ]; then
+ __log_test_fail_status_code $1 $status
+ return 1
+ fi
+ body=${res:0:${#res}-3}
+ if [ $4 == "EMPTY" ]; then
+ if [ ${#body} -ne 0 ]; then
+ __log_test_fail_body
+ return 1
+ else
+ __log_test_pass
+ return 0
+ fi
+ fi
+ command -v md5 > /dev/null # Mac
+ if [ $? -eq 0 ]; then
+ targetMd5=$(echo -n "$4" | md5)
+ else
+ command -v md5sum > /dev/null # Linux
+ if [ $? -eq 0 ]; then
+ targetMd5=$(echo -n "$4" | md5sum | cut -d' ' -f 1) # Need to cut additional info printed by cmd
+ else
+ __log_test_fail_general "Command md5 nor md5sum is available"
+ return 1
+ fi
+ fi
+ targetMd5="\""$targetMd5"\"" #Quotes needed
+
+ echo " TARGET MD5 hash: $targetMd5" >> $HTTPLOG
+
+ if [ "$body" != "$targetMd5" ]; then
+ __log_test_fail_body
+ return 1
+ fi
+
+ __log_test_pass
+ return 0
+}
+
+# CR API: Check a single (oldest) event in md5 format (or none if empty) for path.
+# Note that if a file with json message is given, the json shall be compact, no ws except inside string and not newlines.
+# The MD5 will generate different hash if ws/newlines is present or not in otherwise equivalent json
+# arg: <response-code> <cr-path-id> <topic-url> (EMPTY | <data-file> )
+# (Function for test scripts)
+cr_api_check_single_genric_event_md5_file() {
+ __log_test_start $@
+
+ if [ $# -ne 4 ]; then
+ __print_err "<response-code> <cr-path-id> <topic-url> (EMPTY | <data-file> )" $@
+ return 1
+ fi
+
+ CR_SERVICE_PATH=$(__cr_get_service_path $2)
+ CR_ADAPTER=$CR_SERVICE_PATH
+ if [ $? -ne 0 ]; then
+ __print_err "<cr-path-id> missing or incorrect" $@
+ return 1
+ fi
+
+ query="/get-event/"$3
+ res="$(__do_curl_to_api CR GET $query)"
+ status=${res:${#res}-3}
+
+ if [ $status -ne $1 ]; then
+ __log_test_fail_status_code $1 $status
+ return 1
+ fi
+ body=${res:0:${#res}-3}
+ if [ $4 == "EMPTY" ]; then
+ if [ ${#body} -ne 0 ]; then
+ __log_test_fail_body
+ return 1
+ else
+ __log_test_pass
+ return 0
+ fi
+ fi
+
+ if [ ! -f $4 ]; then
+ __log_test_fail_general "File $3 does not exist"
+ return 1
+ fi
+
+ filedata=$(cat $4)
+
+ command -v md5 > /dev/null # Mac
+ if [ $? -eq 0 ]; then
+ targetMd5=$(echo -n "$filedata" | md5)
+ else
+ command -v md5sum > /dev/null # Linux
+ if [ $? -eq 0 ]; then
+ targetMd5=$(echo -n "$filedata" | md5sum | cut -d' ' -f 1) # Need to cut additional info printed by cmd
+ else
+ __log_test_fail_general "Command md5 nor md5sum is available"
+ return 1
+ fi
+ fi
+ targetMd5="\""$targetMd5"\"" #Quotes needed
+
+ echo " TARGET MD5 hash: $targetMd5" >> $HTTPLOG
+
+ if [ "$body" != "$targetMd5" ]; then
+ __log_test_fail_body
+ return 1
+ fi
+
__log_test_pass
return 0
}
\ No newline at end of file