+++ /dev/null
-#!/bin/bash
-
-# ============LICENSE_START===============================================
-# Copyright (C) 2020 Nordix Foundation. All rights reserved.
-# ========================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=================================================
-#
-
-# This is a script that contains container/service management functions and test functions for Consul/CBS
-
-################ Test engine functions ################
-
-# Create the image var used during the test
-# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
-# <image-tag-suffix> is present only for that exist with staging, snapshot,release tags
-__CONSUL_imagesetup() {
- __check_and_create_image_var CONSUL "CONSUL_IMAGE" "CONSUL_IMAGE_BASE" "CONSUL_IMAGE_TAG" REMOTE_PROXY "$CONSUL_DISPLAY_NAME"
-
-}
-
-# Create the image var used during the test
-# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
-# <image-tag-suffix> is present only for images with staging, snapshot,release tags
-__CBS_imagesetup() {
- __check_and_create_image_var CBS "CBS_IMAGE" "CBS_IMAGE_BASE" "CBS_IMAGE_TAG" REMOTE_RELEASE_ONAP "$CBS_DISPLAY_NAME"
-
-}
-
-# Pull image from remote repo or use locally built image
-# arg: <pull-policy-override> <pull-policy-original>
-# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
-# <pull-policy-original> Shall be used for images that does not allow overriding
-# Both var may contain: 'remote', 'remote-remove' or 'local'
-__CONSUL_imagepull() {
- __check_and_pull_image $2 "$CONSUL_DISPLAY_NAME" $CONSUL_APP_NAME CONSUL_IMAGE
-}
-
-# Pull image from remote repo or use locally built image
-# arg: <pull-policy-override> <pull-policy-original>
-# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
-# <pull-policy-original> Shall be used for images that does not allow overriding
-# Both var may contain: 'remote', 'remote-remove' or 'local'
-__CBS_imagepull() {
- __check_and_pull_image $2 "$CBS_DISPLAY_NAME" $CBS_APP_NAME CBS_IMAGE
-}
-
-# Build image (only for simulator or interfaces stubs owned by the test environment)
-# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
-# <image-tag-suffix> is present only for images with staging, snapshot,release tags
-__CONSUL_imagebuild() {
- echo -e $RED" Image for app CONSUL shall never be built"$ERED
-}
-
-# Build image (only for simulator or interfaces stubs owned by the test environment)
-# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
-# <image-tag-suffix> is present only for images with staging, snapshot,release tags
-__CBS_imagebuild() {
- echo -e $RED" Image for app CBS shall never be built"$ERED
-}
-
-# Generate a string for each included image using the app display name and a docker images format string
-# If a custom image repo is used then also the source image from the local repo is listed
-# arg: <docker-images-format-string> <file-to-append>
-__CONSUL_image_data() {
- echo -e "$CONSUL_DISPLAY_NAME\t$(docker images --format $1 $CONSUL_IMAGE)" >> $2
- if [ ! -z "$CONSUL_IMAGE_SOURCE" ]; then
- echo -e "-- source image --\t$(docker images --format $1 $CONSUL_IMAGE_SOURCE)" >> $2
- fi
-}
-
-# Generate a string for each included image using the app display name and a docker images format string
-# If a custom image repo is used then also the source image from the local repo is listed
-# arg: <docker-images-format-string> <file-to-append>
-__CBS_image_data() {
- echo -e "$CBS_DISPLAY_NAME\t$(docker images --format $1 $CBS_IMAGE)" >> $2
- if [ ! -z "$CBS_IMAGE_SOURCE" ]; then
- echo -e "-- source image --\t$(docker images --format $1 $CBS_IMAGE_SOURCE)" >> $2
- fi
-}
-
-# Scale kubernetes resources to zero
-# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
-# This function is called for apps fully managed by the test script
-__CONSUL_kube_scale_zero() {
- echo -e $RED" Image for app CONSUL is not used in kube"$ERED
-}
-
-# Scale kubernetes resources to zero
-# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
-# This function is called for apps fully managed by the test script
-__CBS_kube_scale_zero() {
- echo -e $RED" Image for app CBS is not used in kube"$ERED
-}
-
-# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
-# This function is called for prestarted apps not managed by the test script.
-__CONSUL_kube_scale_zero_and_wait() {
- echo -e $RED" CONSUL app is not used in kube"$ERED
-}
-
-# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
-# This function is called for prestarted apps not managed by the test script.
-__CBS_kube_scale_zero_and_wait() {
- echo -e $RED" CBS app is not used in kube"$ERED
-}
-
-# Delete all kube resouces for the app
-# This function is called for apps managed by the test script.
-__CONSUL_kube_delete_all() {
- echo -e $RED" CONSUL app is not used in kube"$ERED
-}
-
-# Delete all kube resouces for the app
-# This function is called for apps managed by the test script.
-__CBS_kube_delete_all() {
- echo -e $RED" CBS app is not used in kube"$ERED
-}
-
-# Store docker logs
-# This function is called for apps managed by the test script.
-# args: <log-dir> <file-prexix>
-__CONSUL_store_docker_logs() {
- if [ $RUNMODE == "KUBE" ]; then
- :
- else
- docker logs $CONSUL_APP_NAME > $1/$2_consul.log 2>&1
- fi
-}
-
-# Store docker logs
-# This function is called for apps managed by the test script.
-# args: <log-dir> <file-prexix>
-__CBS_store_docker_logs() {
- if [ $RUNMODE == "KUBE" ]; then
- :
- else
- docker logs $CBS_APP_NAME > $1$2_cbs.log 2>&1
- body="$(__do_curl $LOCALHOST_HTTP:$CBS_EXTERNAL_PORT/service_component_all/$A1PMS_APP_NAME)"
- echo "$body" > $1$2_consul_config.json 2>&1
- fi
-}
-
-# Initial setup of protocol, host and ports
-# This function is called for apps managed by the test script.
-# args: -
-__CONSUL_initial_setup() {
- CONSUL_SERVICE_PATH="http://"$CONSUL_APP_NAME":"$CONSUL_INTERNAL_PORT
-}
-
-# Initial setup of protocol, host and ports
-# This function is called for apps managed by the test script.
-# args: -
-__CBS_initial_setup() {
- CBS_SERVICE_PATH="http://"$CBS_APP_NAME":"$CBS_INTERNAL_PORT
-}
-
-# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
-# For docker, the namespace shall be excluded
-# This function is called for apps managed by the test script as well as for prestarted apps.
-# args: -
-__CONSUL_statisics_setup() {
- echo ""
-}
-
-# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
-# For docker, the namespace shall be excluded
-# This function is called for apps managed by the test script as well as for prestarted apps.
-# args: -
-__CBS_statisics_setup() {
- echo ""
-}
-
-# Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
-# args: -
-__CONSUL_test_requirements() {
- :
-}
-
-# Check application requirements, e.g. helm, the the test needs. Exit 1 if req not satisfied
-# args: -
-__CBS_test_requirements() {
- :
-}
-#######################################################
-
-
-####################
-### Consul functions
-####################
-
-# Function to load config from a file into consul for the a1pms
-# arg: <json-config-file>
-# (Function for test scripts)
-consul_config_app() {
-
- echo -e $BOLD"Configuring Consul"$EBOLD
-
- if [ $# -ne 1 ]; then
- ((RES_CONF_FAIL++))
- __print_err "need one arg, <json-config-file>" $@
- exit 1
- fi
-
- echo " Loading config for "$A1PMS_APP_NAME" from "$1
-
- curlString="$CONSUL_SERVICE_PATH/v1/kv/${A1PMS_CONFIG_KEY}?dc=dc1 -X PUT -H Accept:application/json -H Content-Type:application/json -H X-Requested-With:XMLHttpRequest --data-binary @"$1
-
- result=$(__do_curl "$curlString")
- if [ $? -ne 0 ]; then
- echo -e $RED" FAIL - json config could not be loaded to consul" $ERED
- ((RES_CONF_FAIL++))
- return 1
- fi
- body="$(__do_curl $CBS_SERVICE_PATH/service_component_all/$A1PMS_CONFIG_KEY)"
- echo $body > "./tmp/.output"$1
-
- if [ $? -ne 0 ]; then
- echo -e $RED" FAIL - json config could not be loaded from consul/cbs, contents cannot be checked." $ERED
- ((RES_CONF_FAIL++))
- return 1
- else
- targetJson=$(< $1)
- targetJson="{\"config\":"$targetJson"}"
- echo "TARGET JSON: $targetJson" >> $HTTPLOG
- res=$(python3 ../common/compare_json.py "$targetJson" "$body")
- if [ $res -ne 0 ]; then
- echo -e $RED" FAIL - policy json config read from consul/cbs is not equal to the intended json config...." $ERED
- ((RES_CONF_FAIL++))
- return 1
- else
- echo -e $GREEN" Config loaded ok to consul"$EGREEN
- fi
- fi
-
- echo ""
-
-}
-
-# Start Consul and CBS
-# args: -
-# (Function for test scripts)
-start_consul_cbs() {
-
- echo -e $BOLD"Starting $CONSUL_DISPLAY_NAME and $CBS_DISPLAY_NAME"$EBOLD
- __check_included_image 'CONSUL'
- if [ $? -eq 1 ]; then
- echo -e $RED"The Consul image has not been checked for this test run due to arg to the test script"$ERED
- echo -e $RED"Consul will not be started"$ERED
- exit
- fi
- export CONSUL_APP_NAME
- export CONSUL_INTERNAL_PORT
- export CONSUL_EXTERNAL_PORT
- export CBS_APP_NAME
- export CBS_INTERNAL_PORT
- export CBS_EXTERNAL_PORT
- export CONSUL_HOST
- export CONSUL_DISPLAY_NAME
- export CBS_DISPLAY_NAME
-
- __start_container $CONSUL_CBS_COMPOSE_DIR "" NODOCKERARGS 2 $CONSUL_APP_NAME $CBS_APP_NAME
-
- __check_service_start $CONSUL_APP_NAME $CONSUL_SERVICE_PATH$CONSUL_ALIVE_URL
- __check_service_start $CBS_APP_NAME $CBS_SERVICE_PATH$CBS_ALIVE_URL
-
- echo ""
-}
-