Adaptation of test env to helm chart

[nonrtric.git] / test / auto-test / PM_EI_DEMO.sh

diff --git a/test/auto-test/PM_EI_DEMO.sh b/test/auto-test/PM_EI_DEMO.sh
index 9c27fda..c93a6d7 100755 (executable)
--- a/test/auto-test/PM_EI_DEMO.sh
+++ b/test/auto-test/PM_EI_DEMO.sh
@@ -20,15 +20,20 @@
 TC_ONELINE_DESCR="Preparation demo setup  - policy management and enrichment information"
 
 #App names to include in the test when running docker, space separated list
-DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM SDNC ECS PRODSTUB RC HTTPPROXY"
+DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM SDNC ECS PRODSTUB RC HTTPPROXY KUBEPROXY NGW"
 
 #App names to include in the test when running kubernetes, space separated list
-KUBE_INCLUDED_IMAGES=" MR CR PA RC PRODSTUB RICSIM CP ECS SDNC HTTPPROXY"
+KUBE_INCLUDED_IMAGES=" MR CR PA RC PRODSTUB RICSIM CP ECS SDNC HTTPPROXY KUBEPROXY NGW"
 #Prestarted app (not started by script) to include in the test when running kubernetes, space separated list
 KUBE_PRESTARTED_IMAGES=""
 
+#Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
+#the image is not configured in the supplied env_file
+#Used for images not applicable to all supported profile
+CONDITIONALLY_IGNORED_IMAGES="NGW"
+
 #Supported test environment profiles
-SUPPORTED_PROFILES="ONAP-HONOLULU  ORAN-CHERRY ORAN-DAWN"
+SUPPORTED_PROFILES="ONAP-HONOLULU ONAP-ISTANBUL ORAN-CHERRY ORAN-D-RELEASE ORAN-E-RELEASE"
 #Supported run modes
 SUPPORTED_RUNMODES="DOCKER KUBE"
 
@@ -44,6 +49,10 @@ SUPPORTED_RUNMODES="DOCKER KUBE"
 . ../common/controller_api_functions.sh
 . ../common/consul_cbs_functions.sh
 . ../common/http_proxy_api_functions.sh
+. ../common/kube_proxy_api_functions.sh
+. ../common/gateway_api_functions.sh
+
+setup_testenvironment
 
 #### TEST BEGIN ####
 
@@ -64,7 +73,7 @@ fi
 
 
 if [ "$PMS_VERSION" == "V2" ]; then
-    notificationurl=$CR_SERVICE_PATH"/test"
+    notificationurl=$CR_SERVICE_APP_PATH"/test"
 else
    echo "PMS VERSION 2 (V2) is required"
    exit 1
@@ -72,6 +81,8 @@ fi
 
 clean_environment
 
+start_kube_proxy
+
 STD_NUM_RICS=2
 
 #start_http_proxy  #Remove the comment on this line, comment out 'start_sdnc' and change SDNC to NOSDNC a few lines below to run with proxy
@@ -80,11 +91,15 @@ start_ric_simulators $RIC_SIM_PREFIX"_g3" $STD_NUM_RICS STD_2.0.0
 
 start_mr #Just to prevent errors in the agent log...
 
-start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/application.properties
+start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
+
+if [ ! -z "$NRT_GATEWAY_APP_NAME" ]; then
+    start_gateway $SIM_GROUP/$NRT_GATEWAY_COMPOSE_DIR/$NRT_GATEWAY_CONFIG_FILE
+fi
 
 start_sdnc    # Comment this line to run PMS with proxy
 
-start_policy_agent PROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/application.yaml
+start_policy_agent PROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_CONFIG_FILE
 
 if [ $RUNMODE == "DOCKER" ]; then
     start_consul_cbs
@@ -102,7 +117,7 @@ start_cr
 
 start_prod_stub
 
-start_ecs PROXY $SIM_GROUP/$ECS_COMPOSE_DIR/application.yaml
+start_ecs PROXY $SIM_GROUP/$ECS_COMPOSE_DIR/$ECS_CONFIG_FILE
 
 start_rapp_catalogue
 
@@ -110,6 +125,11 @@ set_agent_trace
 
 set_ecs_trace
 
+use_info_jobs=false  #Set flag if interface supporting info-types is used
+if [[ "$ECS_FEATURE_LEVEL" == *"INFO-TYPES"* ]]; then
+    use_info_jobs=true
+fi
+
 rapp_cat_api_get_services 200 EMPTY
 
 rapp_cat_api_put_service 201 "Emergency-response-app" v1 "Emergency-response-app" "Emergency-response-app"
@@ -148,14 +168,14 @@ done
 #Check the number of types
 api_equal json:policy-types 2 300
 
-api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_PATH/1"
+api_put_service 201 "Emergency-response-app" 0 "$CR_SERVICE_APP_PATH/1"
 
 # Create policies in STD
 for ((i=1; i<=$STD_NUM_RICS; i++))
 do
-    generate_uuid
+    generate_policy_uuid
     api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i STD_QOS_0_2_0 $((2300+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
-    generate_uuid
+    generate_policy_uuid
     api_put_policy 201 "Emergency-response-app" $RIC_SIM_PREFIX"_g3_"$i 'STD_QOS2_0.1.0' $((2400+$i)) NOTRANSIENT $notificationurl demo-testdata/STD2/pi1_template.json 1
 done
 
@@ -185,8 +205,8 @@ fi
 TARGET1="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 TARGET2="$RIC_SIM_HTTPX://$RIC_G1_1:$RIC_SIM_PORT/datadelivery"
 
-STATUS1="$CR_SERVICE_PATH/callbacks/job1-status"
-STATUS2="$CR_SERVICE_PATH/callbacks/job2-status"
+STATUS1="$CR_SERVICE_APP_PATH/callbacks/job1-status"
+STATUS2="$CR_SERVICE_APP_PATH/callbacks/job2-status"
 
 prodstub_arm_producer 200 prod-a
 prodstub_arm_type 200 prod-a type1
@@ -224,7 +244,11 @@ fi
 if [ $ECS_VERSION == "V1-1" ]; then
     prodstub_check_jobdata 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
 else
-    prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
+    if [ $use_info_jobs ]; then
+        prodstub_check_jobdata_3 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
+    else
+        prodstub_check_jobdata_2 200 prod-a job1 type1 $TARGET1 ricsim_g3_1 testdata/ecs/job-template.json
+    fi
 fi
 
 
@@ -240,7 +264,11 @@ fi
 if [ $ECS_VERSION == "V1-1" ]; then
     prodstub_check_jobdata 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
 else
-    prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
+    if [ $use_info_jobs ]; then
+        prodstub_check_jobdata_3 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
+    else
+        prodstub_check_jobdata_2 200 prod-a job2 type1 $TARGET2 ricsim_g3_2 testdata/ecs/job-template.json
+    fi
 fi
 
 check_policy_agent_logs
@@ -252,3 +280,5 @@ check_sdnc_logs
 store_logs          END
 
 print_result
+
+auto_clean_environment
\ No newline at end of file