#!/bin/bash
# ============LICENSE_START===============================================
-# Copyright (C) 2020 Nordix Foundation. All rights reserved.
+# Copyright (C) 2020-2023 Nordix Foundation. All rights reserved.
+# Copyright (C) 2023 OpenInfra Foundation Europe. All rights reserved.
# ========================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
#
-TC_ONELINE_DESCR="Resync of RIC via changes in the consul config or pushed config"
+TC_ONELINE_DESCR="Resync of RIC via changes in the pushed config"
#App names to include in the test when running docker, space separated list
-DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM NGW"
+DOCKER_INCLUDED_IMAGES="CP CR MR A1PMS RICSIM KUBEPROXY"
+
+#Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
+#the image is not configured in the supplied env_file
+#Used for images not applicable to all supported profile
+CONDITIONALLY_IGNORED_IMAGES=""
#Supported test environment profiles
-SUPPORTED_PROFILES="ONAP-GUILIN ONAP-HONOLULU ONAP-ISTANBUL ORAN-CHERRY ORAN-D-RELEASE"
+SUPPORTED_PROFILES="ONAP-KOHN ONAP-LONDON ONAP-MONTREAL ORAN-G-RELEASE ORAN-H-RELEASE ORAN-I-RELEASE"
#Supported run modes
SUPPORTED_RUNMODES="DOCKER"
-. ../common/testcase_common.sh $@
-. ../common/agent_api_functions.sh
-. ../common/ricsimulator_api_functions.sh
-. ../common/cr_api_functions.sh
-. ../common/mr_api_functions.sh
-. ../common/control_panel_api_functions.sh
-. ../common/controller_api_functions.sh
-. ../common/consul_cbs_functions.sh
+. ../common/testcase_common.sh $@
setup_testenvironment
#### TEST BEGIN ####
-if [ "$PMS_VERSION" == "V2" ]; then
- TESTED_VARIANTS="CONSUL NOCONSUL"
-else
- TESTED_VARIANTS="CONSUL"
-fi
+sim_generate_policy_uuid
-for consul_conf in $TESTED_VARIANTS ; do
- generate_policy_uuid
+# Clean container and start all needed containers #
+clean_environment
- # Clean container and start all needed containers #
- clean_environment
+start_kube_proxy
- start_policy_agent NOPROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_CONFIG_FILE
+start_a1pms NOPROXY $SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_CONFIG_FILE
- set_agent_trace
+set_a1pms_trace
- # Create service to be able to receive events when rics becomes available
- # Must use rest towards the agent since dmaap is not configured yet
- api_put_service 201 "ric-registration" 0 "$CR_SERVICE_PATH/ric-registration"
+# Create service to be able to receive events when rics becomes available
+# Must use rest towards the a1pms since dmaap is not configured yet
+a1pms_api_put_service 201 "ric-registration" 0 "$CR_SERVICE_APP_PATH_0/ric-registration"
- # Start one RIC of each type
- start_ric_simulators ricsim_g1 1 OSC_2.1.0
- start_ric_simulators ricsim_g2 1 STD_1.1.3
- if [ "$PMS_VERSION" == "V2" ]; then
- start_ric_simulators ricsim_g3 1 STD_2.0.0
- fi
+# Start one RIC of each type
+start_ric_simulators ricsim_g1 1 OSC_2.1.0
+start_ric_simulators ricsim_g2 1 STD_1.1.3
+start_ric_simulators ricsim_g3 1 STD_2.0.0
+if [[ "$A1PMS_FEATURE_LEVEL" == *"NO-DMAAP"* ]]; then
+ :
+else
start_mr
+fi
- start_cr
+start_cr 1
- start_control_panel
+start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
- if [ $consul_conf == "CONSUL" ]; then
- start_consul_cbs
- fi
- prepare_consul_config NOSDNC ".consul_config.json"
- if [ "$PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
- api_put_configuration 200 ".consul_config.json"
- api_get_configuration 200 ".consul_config.json"
- else
- consul_config_app ".consul_config.json"
- fi
- if [ "$PMS_VERSION" == "V2" ]; then
- api_equal json:rics 3 300
+prepare_a1pms_config NOSDNC ".a1pms_config.json"
- cr_equal received_callbacks 3 120
+a1pms_api_put_configuration 200 ".a1pms_config.json"
+a1pms_api_get_configuration 200 ".a1pms_config.json"
- cr_api_check_all_sync_events 200 ric-registration ricsim_g1_1 ricsim_g2_1 ricsim_g3_1
- else
- api_equal json:rics 2 300
- fi
+a1pms_equal json:rics 3 300
- # Add an STD RIC and check
- start_ric_simulators ricsim_g2 2 STD_1.1.3
+cr_equal 0 received_callbacks 3 120
- prepare_consul_config NOSDNC ".consul_config.json"
- if [ "$PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
- api_put_configuration 200 ".consul_config.json"
- api_get_configuration 200 ".consul_config.json"
- else
- consul_config_app ".consul_config.json"
- fi
+cr_api_check_all_sync_events 200 0 ric-registration ricsim_g1_1 ricsim_g2_1 ricsim_g3_1
- if [ "$PMS_VERSION" == "V2" ]; then
- api_equal json:rics 4 120
+# Add an STD RIC and check
- cr_equal received_callbacks 4 120
+start_ric_simulators ricsim_g2 2 STD_1.1.3
- cr_api_check_all_sync_events 200 ric-registration ricsim_g2_2
- else
- api_equal json:rics 3 120
- fi
+prepare_a1pms_config NOSDNC ".a1pms_config.json"
+a1pms_api_put_configuration 200 ".a1pms_config.json"
+a1pms_api_get_configuration 200 ".a1pms_config.json"
- check_policy_agent_logs
+a1pms_equal json:rics 4 120
+cr_equal 0 received_callbacks 4 120
- # Remove one RIC RIC and check
- start_ric_simulators ricsim_g2 1 STD_1.1.3
+cr_api_check_all_sync_events 200 0 ric-registration ricsim_g2_2
- prepare_consul_config NOSDNC ".consul_config.json"
- if [ "$PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
- api_put_configuration 200 ".consul_config.json"
- api_get_configuration 200 ".consul_config.json"
- else
- consul_config_app ".consul_config.json"
- fi
+check_a1pms_logs
- if [ "$PMS_VERSION" == "V2" ]; then
- api_equal json:rics 3 120
+# Remove one RIC and check
+start_ric_simulators ricsim_g2 1 STD_1.1.3
- cr_equal received_callbacks 4 120
- else
- api_equal json:rics 2 120
- fi
+prepare_a1pms_config NOSDNC ".a1pms_config.json"
+a1pms_api_put_configuration 200 ".a1pms_config.json"
+a1pms_api_get_configuration 200 ".a1pms_config.json"
+
+a1pms_equal json:rics 3 120
+
+cr_equal 0 received_callbacks 4 120
+
+if [ "$A1PMS_VERSION" == "V2" ]; then
+ a1pms_api_get_configuration 200 ".a1pms_config.json"
+fi
- if [ "$PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
- api_get_configuration 200 ".consul_config.json"
- fi
+check_a1pms_logs
- check_policy_agent_logs
- check_sdnc_logs
+store_logs END_$consul_conf
- store_logs END_$consul_conf
-done
#### TEST COMPLETE ####