TC_ONELINE_DESCR="Resync of RIC via changes in the consul config or pushed config"
#App names to include in the test when running docker, space separated list
-DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR PA RICSIM NGW"
+DOCKER_INCLUDED_IMAGES="CBS CONSUL CP CR MR A1PMS RICSIM KUBEPROXY"
+
+#Ignore image in DOCKER_INCLUDED_IMAGES, KUBE_INCLUDED_IMAGES if
+#the image is not configured in the supplied env_file
+#Used for images not applicable to all supported profile
+CONDITIONALLY_IGNORED_IMAGES="CBS CONSUL"
#Supported test environment profiles
-SUPPORTED_PROFILES="ONAP-GUILIN ONAP-HONOLULU ONAP-ISTANBUL ORAN-CHERRY ORAN-D-RELEASE"
+SUPPORTED_PROFILES="ONAP-GUILIN ONAP-HONOLULU ONAP-ISTANBUL ONAP-JAKARTA ONAP-KOHN ONAP-LONDON ORAN-CHERRY ORAN-D-RELEASE ORAN-E-RELEASE ORAN-F-RELEASE ORAN-G-RELEASE"
#Supported run modes
SUPPORTED_RUNMODES="DOCKER"
-. ../common/testcase_common.sh $@
-. ../common/agent_api_functions.sh
-. ../common/ricsimulator_api_functions.sh
-. ../common/cr_api_functions.sh
-. ../common/mr_api_functions.sh
-. ../common/control_panel_api_functions.sh
-. ../common/controller_api_functions.sh
-. ../common/consul_cbs_functions.sh
+. ../common/testcase_common.sh $@
setup_testenvironment
#### TEST BEGIN ####
-if [ "$PMS_VERSION" == "V2" ]; then
+if [ "$A1PMS_VERSION" == "V2" ]; then
TESTED_VARIANTS="CONSUL NOCONSUL"
+ if [[ "$A1PMS_FEATURE_LEVEL" == *"NOCONSUL"* ]]; then
+ TESTED_VARIANTS="NOCONSUL"
+ fi
else
TESTED_VARIANTS="CONSUL"
fi
# Clean container and start all needed containers #
clean_environment
- start_policy_agent NOPROXY $SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_CONFIG_FILE
+ start_kube_proxy
+
+ start_a1pms NOPROXY $SIM_GROUP/$A1PMS_COMPOSE_DIR/$A1PMS_CONFIG_FILE
- set_agent_trace
+ set_a1pms_trace
# Create service to be able to receive events when rics becomes available
- # Must use rest towards the agent since dmaap is not configured yet
- api_put_service 201 "ric-registration" 0 "$CR_SERVICE_PATH/ric-registration"
+ # Must use rest towards the a1pms since dmaap is not configured yet
+ a1pms_api_put_service 201 "ric-registration" 0 "$CR_SERVICE_APP_PATH_0/ric-registration"
# Start one RIC of each type
start_ric_simulators ricsim_g1 1 OSC_2.1.0
start_ric_simulators ricsim_g2 1 STD_1.1.3
- if [ "$PMS_VERSION" == "V2" ]; then
+ if [ "$A1PMS_VERSION" == "V2" ]; then
start_ric_simulators ricsim_g3 1 STD_2.0.0
fi
start_mr
- start_cr
+ start_cr 1
- start_control_panel
+ start_control_panel $SIM_GROUP/$CONTROL_PANEL_COMPOSE_DIR/$CONTROL_PANEL_CONFIG_FILE
if [ $consul_conf == "CONSUL" ]; then
start_consul_cbs
fi
- prepare_consul_config NOSDNC ".consul_config.json"
+ __CONFIG_HEADER="NOHEADER"
+ if [ $RUNMODE == "KUBE" ]; then
+ __CONFIG_HEADER="HEADER"
+ else
+ if [[ "$A1PMS_FEATURE_LEVEL" == *"NOCONSUL"* ]]; then
+ __CONFIG_HEADER="HEADER"
+ fi
+ fi
+ prepare_consul_config NOSDNC ".consul_config.json" $__CONFIG_HEADER
- if [ "$PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
- api_put_configuration 200 ".consul_config.json"
- api_get_configuration 200 ".consul_config.json"
+ if [ "$A1PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
+ a1pms_api_put_configuration 200 ".consul_config.json"
+ a1pms_api_get_configuration 200 ".consul_config.json"
else
consul_config_app ".consul_config.json"
fi
- if [ "$PMS_VERSION" == "V2" ]; then
- api_equal json:rics 3 300
+ if [ "$A1PMS_VERSION" == "V2" ]; then
+ a1pms_equal json:rics 3 300
- cr_equal received_callbacks 3 120
+ cr_equal 0 received_callbacks 3 120
- cr_api_check_all_sync_events 200 ric-registration ricsim_g1_1 ricsim_g2_1 ricsim_g3_1
+ cr_api_check_all_sync_events 200 0 ric-registration ricsim_g1_1 ricsim_g2_1 ricsim_g3_1
else
- api_equal json:rics 2 300
+ a1pms_equal json:rics 2 300
fi
# Add an STD RIC and check
start_ric_simulators ricsim_g2 2 STD_1.1.3
- prepare_consul_config NOSDNC ".consul_config.json"
- if [ "$PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
- api_put_configuration 200 ".consul_config.json"
- api_get_configuration 200 ".consul_config.json"
+ prepare_consul_config NOSDNC ".consul_config.json" $__CONFIG_HEADER
+ if [ "$A1PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
+ a1pms_api_put_configuration 200 ".consul_config.json"
+ a1pms_api_get_configuration 200 ".consul_config.json"
else
consul_config_app ".consul_config.json"
fi
- if [ "$PMS_VERSION" == "V2" ]; then
- api_equal json:rics 4 120
+ if [ "$A1PMS_VERSION" == "V2" ]; then
+ a1pms_equal json:rics 4 120
- cr_equal received_callbacks 4 120
+ cr_equal 0 received_callbacks 4 120
- cr_api_check_all_sync_events 200 ric-registration ricsim_g2_2
+ cr_api_check_all_sync_events 200 0 ric-registration ricsim_g2_2
else
- api_equal json:rics 3 120
+ a1pms_equal json:rics 3 120
fi
- check_policy_agent_logs
+ check_a1pms_logs
# Remove one RIC RIC and check
start_ric_simulators ricsim_g2 1 STD_1.1.3
- prepare_consul_config NOSDNC ".consul_config.json"
- if [ "$PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
- api_put_configuration 200 ".consul_config.json"
- api_get_configuration 200 ".consul_config.json"
+ prepare_consul_config NOSDNC ".consul_config.json" $__CONFIG_HEADER
+ if [ "$A1PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
+ a1pms_api_put_configuration 200 ".consul_config.json"
+ a1pms_api_get_configuration 200 ".consul_config.json"
else
consul_config_app ".consul_config.json"
fi
- if [ "$PMS_VERSION" == "V2" ]; then
- api_equal json:rics 3 120
+ if [ "$A1PMS_VERSION" == "V2" ]; then
+ a1pms_equal json:rics 3 120
- cr_equal received_callbacks 4 120
+ cr_equal 0 received_callbacks 4 120
else
- api_equal json:rics 2 120
+ a1pms_equal json:rics 2 120
fi
- if [ "$PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
- api_get_configuration 200 ".consul_config.json"
+ if [ "$A1PMS_VERSION" == "V2" ] && [ $consul_conf == "NOCONSUL" ]; then
+ a1pms_api_get_configuration 200 ".consul_config.json"
fi
- check_policy_agent_logs
- check_sdnc_logs
+ check_a1pms_logs
store_logs END_$consul_conf
done
Code Review / nonrtric.git / blobdiff