UL data path changes at Phy stub, RLC UL UM and DU APP [Issue-ID: ODUHIGH-262]
[o-du/l2.git] / src / phy_stub / l1_bdy1.c
diff --git a/src/phy_stub/l1_bdy1.c b/src/phy_stub/l1_bdy1.c
deleted file mode 100644 (file)
index a7176a5..0000000
+++ /dev/null
@@ -1,1314 +0,0 @@
-/*******************************************************************************
-################################################################################
-#   Copyright (c) [2017-2019] [Radisys]                                        #
-#                                                                              #
-#   Licensed under the Apache License, Version 2.0 (the "License");            #
-#   you may not use this file except in compliance with the License.           #
-#   You may obtain a copy of the License at                                    #
-#                                                                              #
-#       http://www.apache.org/licenses/LICENSE-2.0                             #
-#                                                                              #
-#   Unless required by applicable law or agreed to in writing, software        #
-#   distributed under the License is distributed on an "AS IS" BASIS,          #
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   #
-#   See the License for the specific language governing permissions and        #
-#   limitations under the License.                                             #
-################################################################################
-*******************************************************************************/
-
-/*This file contains stub for PHY to handle messages to/from MAC CL */
-
-#include "common_def.h"
-#include "lrg.h"
-#include "lrg.x"
-#include "du_app_mac_inf.h"
-#include "mac_sch_interface.h"
-#include "lwr_mac.h"
-#include "lwr_mac_phy.h"
-#ifdef INTEL_FAPI
-#include "fapi.h"
-#include "fapi_vendor_extension.h"
-#endif
-#include "lphy_stub.h"
-#include "lwr_mac_upr_inf.h"
-#include "mac_utils.h"
-#include "l1.h"
-
-/*******************************************************************
- *
- * @brief Builds and sends param response to MAC CL
- *
- * @details
- *
- *    Function : l1BldAndSndParamRsp
- *
- *    Functionality:
- *          - Builds and sends param response to MAC
- *
- * @params[in] Config request message pointer
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-S16 l1BldAndSndParamRsp(void *msg)
-{
-#ifdef INTEL_FAPI
-   uint8_t index = 0;
-   uint32_t msgLen = 0;
-   fapi_param_resp_t *fapiParamRsp;
-
-   MAC_ALLOC(fapiParamRsp, sizeof(fapi_param_resp_t));
-   if(!fapiParamRsp)
-   {
-      DU_LOG("PHY STUB: Memory allocation failed");
-      return RFAILED;
-   }
-
-   /* Cell Params */
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_RELEASE_CAPABILITY_TAG,                                sizeof(uint16_t), 1, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PHY_STATE_TAG,                                 sizeof(uint16_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_SKIP_BLANK_DL_CONFIG_TAG,                      sizeof(uint8_t),  0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_SKIP_BLANK_UL_CONFIG_TAG,                      sizeof(uint8_t),  0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_NUM_CONFIG_TLVS_TO_REPORT_TYPE_TAG,              sizeof(uint8_t),  0, &msgLen);
-
-   /* Carrier Params */
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_CYCLIC_PREFIX_TAG,                               sizeof(uint8_t),  1, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_SUPPORTED_SUBCARRIER_SPACING_DL_TAG,           sizeof(uint8_t),  1, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_SUPPORTED_BANDWIDTH_DL_TAG,                    sizeof(uint16_t), 1, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_SUPPORTED_SUBCARRIER_SPACING_UL_TAG,           sizeof(uint8_t),  0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_SUPPORTED_BANDWIDTH_UL_TAG,                    sizeof(uint16_t), 0, &msgLen);
-
-   /* PDCCH Param*/
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_CCE_MAPPING_TYPE_TAG,                                  sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_CORESET_OUTSIDE_FIRST_3_OFDM_SYMS_OF_SLOT_TAG,   sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PRECODER_GRANULARITY_CORESET_TAG,              sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDCCH_MU_MIMO_TAG,                             sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDCCH_PRECODER_CYCLING_TAG,                    sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_PDCCHS_PER_SLOT_TAG,                               sizeof(uint8_t), 0, &msgLen);
-
-   /* PUCCH Param */
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUCCH_FORMATS_TAG,                             sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_PUCCHS_PER_SLOT_TAG,                         sizeof(uint8_t), 0, &msgLen);
-
-   /* PDSCH Param */
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_MAPPING_TYPE_TAG,                        sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_ALLOCATION_TYPES_TAG,                      sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_VRB_TO_PRB_MAPPING_TAG,                  sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_CBG_TAG,                                 sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_DMRS_CONFIG_TYPES_TAG,                   sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_DMRS_MAX_LENGTH_TAG,                     sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_DMRS_ADDITIONAL_POS_TAG,                 sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_PDSCHS_TBS_PER_SLOT_TAG,                   sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_NUMBER_MIMO_LAYERS_PDSCH_TAG,              sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_SUPPORTED_MAX_MODULATION_ORDER_DL_TAG,         sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_MU_MIMO_USERS_DL_TAG,                      sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_DATA_IN_DMRS_SYMBOLS_TAG,                        sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PREMPTIONSUPPORT_TAG,                          sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PDSCH_NON_SLOT_SUPPORT_TAG,                      sizeof(uint8_t), 0, &msgLen);
-
-   /* PUSCH Param */
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_UCI_MUX_ULSCH_IN_PUSCH_TAG,                    sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_UCI_ONLY_PUSCH_TAG,                            sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_FREQUENCY_HOPPING_TAG,                   sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_DMRS_CONFIG_TYPES_TAG,                   sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_DMRS_MAX_LEN_TAG,                        sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_DMRS_ADDITIONAL_POS_TAG,                 sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_CBG_TAG,                                 sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_MAPPING_TYPE_TAG,                          sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_ALLOCATION_TYPES_TAG,                    sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_VRB_TO_PRB_MAPPING_TAG,                  sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_MAX_PTRS_PORTS_TAG,                        sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_PDUSCHS_TBS_PER_SLOT_TAG,                  sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_NUMBER_MIMO_LAYERS_NON_CB_PUSCH_TAG,         sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_SUPPORTED_MODULATION_ORDER_UL_TAG,               sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_MU_MIMO_USERS_UL_TAG,                        sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_DFTS_OFDM_SUPPORT_TAG,                           sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PUSCH_AGGREGATION_FACTOR_TAG,                    sizeof(uint8_t), 0, &msgLen);
-
-   /* PRACH Params */
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PRACH_LONG_FORMATS_TAG,                        sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PRACH_SHORT_FORMATS_TAG,                         sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_PRACH_RESTRICTED_SETS_TAG,                       sizeof(uint8_t), 0, &msgLen);
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_MAX_PRACH_FD_OCCASIONS_IN_A_SLOT_TAG,            sizeof(uint8_t), 0, &msgLen);
-
-   /* MEASUREMENT TAG */
-   fillTlvs(&fapiParamRsp->tlvs[index++],  FAPI_RSSI_MEASUREMENT_SUPPORT_TAG,                    sizeof(uint8_t), 0, &msgLen);
-
-   fapiParamRsp->number_of_tlvs = index;
-   msgLen += sizeof(fapi_param_resp_t) - sizeof(fapi_msg_t);
-   fillMsgHeader(&fapiParamRsp->header, FAPI_PARAM_RESPONSE, msgLen);
-   fapiParamRsp->error_code = MSG_OK;
-
-   DU_LOG("\nPHY_STUB: Sending Param Request to Lower Mac");
-   procPhyMessages(fapiParamRsp->header.msg_id, sizeof(fapi_param_resp_t), (void *)fapiParamRsp);
-   MAC_FREE(fapiParamRsp, sizeof(fapi_param_resp_t));
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Builds and sends config response to lower mac
- *
- * @details
- *
- *    Function : l1BldAndSndConfigRsp
- *
- *    Functionality:
- *          - Builds and sends config response to MAC
- *
- * @params[in] Config request message pointer
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-
-S16 l1BldAndSndConfigRsp(void *msg)
-{
-#ifdef INTEL_FAPI
-   uint32_t msgLen = 0;
-   fapi_config_resp_t *fapiConfigRsp;
-
-   MAC_ALLOC(fapiConfigRsp, sizeof(fapi_config_resp_t));
-   if(!fapiConfigRsp)
-   {
-      DU_LOG("PHY STUB: Memory allocation failed");
-      return RFAILED;
-   }
-   memset(fapiConfigRsp, 0, sizeof(fapi_config_resp_t));
-   fapiConfigRsp->number_of_invalid_tlvs = NULLP;
-   fapiConfigRsp->number_of_inv_tlvs_idle_only = NULLP;
-   fapiConfigRsp->number_of_missing_tlvs = NULLP;
-   fapiConfigRsp->error_code = MSG_OK;
-   msgLen = sizeof(fapi_config_resp_t) - sizeof(fapi_msg_t);
-   fillMsgHeader(&fapiConfigRsp->header, FAPI_CONFIG_RESPONSE, msgLen);
-
-   DU_LOG("\nPHY_STUB: Sending Config Response to Lower Mac");
-
-   procPhyMessages(fapiConfigRsp->header.msg_id, \
-        sizeof(fapi_config_resp_t), (void *)fapiConfigRsp);
-   MAC_FREE(fapiConfigRsp, sizeof(fapi_config_resp_t));
-#endif
-   return ROK;
-}
-/*******************************************************************
- *
- * @brief Handles param request received from MAC
- *
- * @details
- *
- *    Function : l1HdlParamReq
- *
- *    Functionality:
- *          -Handles param request received from MAC
- *
- * @params[in]   Message length
- *               Param request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-void l1HdlParamReq(uint32_t msgLen, void *msg)
-{
-#ifdef INTEL_FAPI
-   DU_LOG("\nPHY_STUB: Received Param Request in PHY");
-
-   /* Build and send PARAM RESPONSE */
-   if(l1BldAndSndParamRsp(msg)!= ROK)
-   {
-      DU_LOG("\nPHY_STUB: Failed Sending Param Response");
-   }
-   MAC_FREE(msg, sizeof(fapi_param_req_t));
-#endif
-} 
-
-/*******************************************************************
- *
- * @brief Handles config request received from MAC
- *
- * @details
- *
- *    Function : l1HdlConfigReq
- *
- *    Functionality:
- *          -Handles config request received from MAC
- *
- * @params[in]   Message length
- *               config request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-void l1HdlConfigReq(uint32_t msgLen, void *msg)
-{
-#ifdef INTEL_FAPI
-   p_fapi_api_queue_elem_t configReqElem = (p_fapi_api_queue_elem_t)msg;
-   fapi_config_req_t *configReq = (fapi_config_req_t *)(configReqElem +1);
-
-   DU_LOG("\nPHY_STUB: Received Config Request in PHY");
-
-   /* Handling CONFIG RESPONSE */
-   if(l1BldAndSndConfigRsp(configReq)!= ROK)
-   {
-      printf("\nPHY_STUB: Failed Sending config Response");
-   }
-
-   MAC_FREE(msg, msgLen);
-#endif
-
-}
-
-/*******************************************************************
- *
- * @brief Build and Send CRC Indication
- *
- * @details
- *
- *    Function : l1BuildAndSendCrcInd
- *
- *    Functionality:
- *      Build and Send CRC Indication
- *
- * @params[in] Slot
- *             SFN 
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-uint16_t l1BuildAndSendCrcInd(uint16_t slot, uint16_t sfn)
-{
-#ifdef INTEL_FAPI
-   uint8_t idx = 0;
-   fapi_crc_ind_t  *crcInd;
-
-   MAC_ALLOC(crcInd, sizeof(fapi_crc_ind_t));
-   if(!crcInd)
-   {
-      printf("\nPHY_STUB: Memory allocation failed for CRC Indication Message");
-      return RFAILED;
-   }
-   memset(crcInd, 0, sizeof(fapi_crc_ind_t));
-
-   /* TODO: Fill the required values. As of now only 1 CRC status PASS is filled */
-   crcInd->sfn = sfn;
-   crcInd->slot = slot;
-   crcInd->numCrcs = 1;
-
-   crcInd->crc[idx].handle = 0;
-   crcInd->crc[idx].rnti = 0;
-   crcInd->crc[idx].harqId = 0;
-   crcInd->crc[idx].tbCrcStatus = 0;
-   crcInd->crc[idx].numCb = 1;
-   crcInd->crc[idx].cbCrcStatus[0] = 0;
-   crcInd->crc[idx].ul_cqi = 0;
-   crcInd->crc[idx].timingAdvance = 0;
-   crcInd->crc[idx].rssi = 0;
-
-   fillMsgHeader(&crcInd->header, FAPI_CRC_INDICATION, \
-        sizeof(fapi_crc_ind_t) - sizeof(fapi_msg_t));
-
-   /* Sending RACH indication to MAC */
-   DU_LOG("\nPHY STUB: Sending CRC Indication to MAC");
-   procPhyMessages(crcInd->header.msg_id, sizeof(fapi_crc_ind_t), (void *)crcInd);
-   MAC_FREE(crcInd, sizeof(fapi_crc_ind_t));
-#endif
-   return ROK;
-} /* l1BuildAndSendCrcInd */
-
-#ifdef INTEL_FAPI
-/*******************************************************************
- *
- * @brief Build and send Rx data indication
- *
- * @details
- *
- *    Function : l1BuildAndSendRxDataInd
- *
- *    Functionality:
- *       Build and send Rx data indication
- *
- * @params[in] SFN
- *             Slot
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-uint16_t l1BuildAndSendRxDataInd(uint16_t slot, uint16_t sfn, fapi_ul_pusch_pdu_t puschPdu)
-{
-   uint8_t idx = 0;
-   fapi_rx_data_indication_t *rxDataInd =NULLP;
-   fapi_pdu_ind_info_t       *pduInfo =NULLP;
-   uint8_t  *pdu = NULLP;
-   uint16_t byteIdx = 0;
-   uint32_t msgLen = 0;
-   MsgType type = 0;
-
-   if(!msg3Sent)
-   {
-      msg3Sent = true;
-      type = MSG_TYPE_MSG3;
-      sleep(2);
-   }
-   else if(!msg5ShortBsrSent)
-   {
-      msg5ShortBsrSent = true;
-      type = MSG_TYPE_SHORT_BSR;
-   }
-   else if(!msg5Sent)
-   {
-      msg5Sent = true;
-      type = MSG_TYPE_MSG5;
-   }
-   else if(!msgRegistrationComp)
-   {
-      msgRegistrationComp = true;
-      type = MSG_TYPE_REGISTRATION_COMPLETE; 
-   }
-   else if(!msgSecurityModeComp)
-   {
-      msgSecurityModeComp = true;
-      type = MSG_TYPE_SECURITY_MODE_COMPLETE;
-   }
-   else if(!msgRrcReconfiguration)
-   {
-      msgRrcReconfiguration = true;
-      type = MSG_TYPE_RRC_RECONFIG_COMPLETE;
-   }
-   else
-      return RFAILED;
-
-   MAC_ALLOC(rxDataInd, sizeof(fapi_rx_data_indication_t));
-   if(!rxDataInd)
-   {
-      printf("\nPHY_STUB: Memory allocation failed for Rx Data Indication");
-      return RFAILED;
-   }
-   memset(rxDataInd, 0, sizeof(fapi_rx_data_indication_t));
-   
-   msgLen = sizeof(fapi_rx_data_indication_t) - sizeof(fapi_msg_t);
-   rxDataInd->sfn = sfn;
-   rxDataInd->slot = slot;
-   rxDataInd->numPdus = 1;
-
-   pduInfo = &rxDataInd->pdus[idx];
-   pduInfo->handle = puschPdu.handle;
-   pduInfo->rnti = puschPdu.rnti;
-   pduInfo->harqId = puschPdu.puschData.harqProcessId;
-   pduInfo->pdu_length = puschPdu.puschData.tbSize ;
-   pduInfo->ul_cqi = 0;
-   pduInfo->timingAdvance = 0;
-   pduInfo->rssi = 0;
-
-   /* Filling pdu with random values for testing */
-   pduInfo->pduData = NULL;
-   MAC_ALLOC(pduInfo->pduData, pduInfo->pdu_length);
-   if(!pduInfo->pduData)
-   {
-      printf("\nPHY_STUB: Memory allocation failed for Rx Data Pdu");
-      return RFAILED;
-   }
-   memset(pduInfo->pduData, 0, pduInfo->pdu_length);
-   /* Filling PDU */
-   pdu = (uint8_t *)pduInfo->pduData;
-
-   switch(type)
-   {
-      case MSG_TYPE_MSG3: 
-        {
-           DU_LOG("\nPHY_STUB: Forming MSG3 PDU ");
-           /* For Initial RRC setup Request,
-              MAC subheader format is R/R/LCId (1byte)
-              LCId is CCCH(0)
-              From 38.321 section 6.1.1
-            */
-           pdu[byteIdx++] = 0;
-           /* Hardcoding MAC PDU */
-           pdu[byteIdx++] = 16;
-           pdu[byteIdx++] = 00;
-           pdu[byteIdx++] = 00;
-           pdu[byteIdx++] = 00;
-           pdu[byteIdx++] = 00;
-           pdu[byteIdx++] = 103;
-
-           break;
-        }
-      case MSG_TYPE_SHORT_BSR:
-      {
-        DU_LOG("\nPHY_STUB: Forming SHORT BSR PDU ");
-        uint8_t lcgId = 0;
-        uint8_t bufferSizeIdx = 6;
-
-        /* For Short BSR
-           MAC subheader format is R/R/LcId (1Byte)
-           LCId is 61
-           From 38.321 section 6.1.1
-         */
-        pdu[byteIdx++] = 61;    // LCID
-        pdu[byteIdx++] = (lcgId << 5) | bufferSizeIdx;
-
-        break;
-      }
-
-      case MSG_TYPE_MSG5:
-      {
-        DU_LOG("\nPHY_STUB: Forming MSG5 PDU");
-        uint8_t  msg5PduLen = 33;
-        /* For RRC setup complete
-           MAC subheader format is R/F/LCId/L (2/3 bytes)
-           LCId is 1 for SRB1
-           L is length of PDU i.e 6bytes here 
-           From 38.321 section 6.1.1
-         */
-        uint8_t msg5[] = {1, msg5PduLen, 0, 0, 16, 0, 5, 223, 128, 16, 94, \
-           64, 3, 64, 89, 61, 138, 64, 0, 0, 0, 4, 0, 0, 4, 68, 11, 128, \
-              184, 56, 0, 0, 0, 0, 0};
-
-        msg5PduLen += 2;  /* 2bytes of header */
-        memcpy(pdu, &msg5, msg5PduLen);
-        byteIdx += msg5PduLen; /* 2 bytes of header */
-        break;
-      }
-
-      case MSG_TYPE_SECURITY_MODE_COMPLETE:
-      {
-        DU_LOG("\nPHY_STUB: Forming SECURITY MODE COMPLETE PDU");
-        uint8_t  pduLen = 12;
-        /* For security mode complete where RRC Container is dummy
-           MAC subheader format is R/F/LCId/L (2/3 bytes)
-           LCId is 1 for SRB1
-           L is length of PDU i.e 6bytes here 
-           From 38.321 section 6.1.1
-         */
-        uint8_t msg[] = {1, pduLen, 0, 3, 0x2a, 0x40, 0, 0, 0, 0, 0, 0, 0, 0};
-
-        pduLen += 2;  /* 2bytes of header */
-        memcpy(pdu, &msg, pduLen);
-        byteIdx += pduLen; /* 2 bytes of header */
-        break;
-      }
-      case MSG_TYPE_REGISTRATION_COMPLETE:
-      {
-          
-         DU_LOG("\nPHY_STUB: Forming RRC REGISTRATION COMPLETE PDU");
-         uint8_t  pduLen = 12;
-         /* For rrc reconfig complete where RRC Container is dummy
-         MAC subheader format is R/F/LCId/L (2/3 bytes)
-         LCId is 1 for SRB1
-         L is length of PDU i.e 6bytes here
-         From 38.321 section 6.1.1
-         */
-         uint8_t msg[] = {1, pduLen, 0, 0x04, 0x3a, 0x81, 0xbf, 0, 0x21, 0x80, 0, \
-         0, 0, 0};
-       
-         pduLen += 2;  /* 2bytes of header */
-         memcpy(pdu, &msg, pduLen);
-         byteIdx += pduLen; /* 2 bytes of header */
-          break;
-      }
-      case MSG_TYPE_RRC_RECONFIG_COMPLETE:
-      {
-         DU_LOG("\nPHY_STUB: Forming RRC RECONFIGURATION COMPLETE PDU");
-         uint8_t  pduLen = 14;
-        /* For rrc reconfig complete where RRC Container is dummy
-        MAC subheader format is R/F/LCId/L (2/3 bytes)
-        LCId is 1 for SRB1
-        L is length of PDU i.e 6bytes here
-        From 38.321 section 6.1.1
-        */
-        uint8_t msg[] = {1, pduLen, 0, 6, 8, 64, 0, 0, 0, 0, \
-                         0, 0, 0, 0, 0};
-       
-        pduLen += 2;  /* 2bytes of header */
-        memcpy(pdu, &msg, pduLen);
-        byteIdx += pduLen; /* 2 bytes of header */
-        break;
-
-      }
-      
-      default:
-        break;
-   } /* End of switch(type) */
-   /* Filling MAC SDU for Padding bytes*/
-   if(byteIdx < pduInfo->pdu_length)
-   {
-      /* For Padding
-        MAC subheader format is R/R/LCId (1byte)
-        LCId is 63 for padding
-        From 38.321 section 6.1.1
-       */
-      pdu[byteIdx++] = 63;
-
-      for(; byteIdx < pduInfo->pdu_length; byteIdx++)
-        pdu[byteIdx] = 0;
-   }
-   msgLen += pduInfo->pdu_length;
-
-   fillMsgHeader(&rxDataInd->header, FAPI_RX_DATA_INDICATION, msgLen);
-
-   /* Sending Rx data indication to MAC */
-   DU_LOG("\nPHY STUB: Sending Rx data Indication to MAC");
-   procPhyMessages(rxDataInd->header.msg_id, sizeof(fapi_rx_data_indication_t), (void *)rxDataInd);
-
-   if(pduInfo->pdu_length)
-      MAC_FREE(pduInfo->pduData, pduInfo->pdu_length);
-   MAC_FREE(rxDataInd, sizeof(fapi_rx_data_indication_t));
-   return ROK;
-}
-#endif
-
-/*******************************************************************
- *
- * @brief Builds and Sends RACH indication to MAC 
- *
- * @details
- *
- *    Function : l1BuildAndSendRachInd 
- *
- *    Functionality:
- *      Builds and Sends RACH indication to MAC
- *
- * @params[in] SFN value 
- *             slot value
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-uint16_t l1BuildAndSendRachInd(uint16_t slot, uint16_t sfn)
-{
-#ifdef INTEL_FAPI
-   uint8_t   rachPduIdx = 0; 
-   uint8_t   preamIdx = 0;
-   fapi_rach_pdu_t  *rachPdu;
-   fapi_rach_indication_t  *rachInd;
-
-   /* Building RACH indication */
-   MAC_ALLOC(rachInd, sizeof(fapi_rach_indication_t));
-   if(!rachInd)
-   {
-      printf("\nPHY_STUB: Memory allocation failed for Rach Indication Message");
-      return RFAILED;
-   }
-   memset(rachInd, 0, sizeof(fapi_rach_indication_t)); 
-   rachInd->sfn = sfn;
-   rachInd->slot = slot;
-   rachInd->numPdus = 1;
-
-   rachPdu = &rachInd->rachPdu[rachPduIdx];
-   rachPdu->phyCellId = NR_PCI;
-   rachPdu->symbolIndex = 0;
-   rachPdu->slotIndex = slot;
-   rachPdu->freqIndex = 0;
-   rachPdu->avgRssi = 0;
-   rachPdu->avgSnr = 0;
-   rachPdu->numPreamble = 1;
-
-   rachPdu->preambleInfo[preamIdx].preambleIndex = 3;
-   rachPdu->preambleInfo[preamIdx].timingAdvance = 0;
-   rachPdu->preambleInfo[preamIdx].preamblePwr = 0;
-
-   fillMsgHeader(&rachInd->header, FAPI_RACH_INDICATION, \
-        sizeof(fapi_rach_indication_t) - sizeof(fapi_msg_t));
-
-   /* Sending RACH indication to MAC */
-   DU_LOG("\nPHY STUB: Sending RACH Indication to MAC");
-   procPhyMessages(rachInd->header.msg_id, sizeof(fapi_rach_indication_t), (void *)rachInd);
-   MAC_FREE(rachInd, sizeof(fapi_rach_indication_t));
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Builds and Send the Slot Indication message to MAC
- *
- * @details
- *
- *    Function : l1BuildAndSendSlotIndication
- *
- *    Functionality:
- *          -Send the Slot indication Message to MAC
- *
- * @params[in]   Message length
- *               config request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-uint16_t l1BuildAndSendSlotIndication()
-{
-#ifdef INTEL_FAPI
-   fapi_slot_ind_t *slotIndMsg;
-
-   MAC_ALLOC(slotIndMsg, sizeof(fapi_slot_ind_t));
-   if(!slotIndMsg)
-   {
-      DU_LOG("\nPHY_STUB: Memory allocation failed for slot Indication Message");
-      return RFAILED;
-   }
-   else
-   {
-      memset(slotIndMsg, 0, sizeof(fapi_slot_ind_t));
-      slotIndMsg->sfn = sfnValue;
-      slotIndMsg->slot = slotValue;
-
-#ifdef ODU_SLOT_IND_DEBUG_LOG
-      DU_LOG("\n\nPHY_STUB: SLOT indication [%d:%d]",sfnValue,slotValue);
-#endif
-      /* increment for the next TTI */
-      slotValue++;
-      if(sfnValue >= MAX_SFN_VALUE && slotValue > MAX_SLOT_VALUE)
-      {
-        sfnValue = 0;
-        slotValue = 0;
-      }
-      else if(slotValue > MAX_SLOT_VALUE)
-      {
-        sfnValue++;
-        slotValue = 0;
-      }
-      fillMsgHeader(&slotIndMsg->header, FAPI_SLOT_INDICATION, \
-           sizeof(fapi_slot_ind_t) - sizeof(fapi_msg_t));
-      procPhyMessages(slotIndMsg->header.msg_id, sizeof(fapi_slot_ind_t), (void*)slotIndMsg);
-      MAC_FREE(slotIndMsg, sizeof(fapi_slot_ind_t));
-   }
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Handles start request received from MAC
- *
- * @details
- *
- *    Function : l1HdlStartReq
- *
- *    Functionality:
- *          -Handles start request received from MAC
- *
- * @params[in]   Message length
- *               config request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-S16 l1HdlStartReq(uint32_t msgLen, void *msg)
-{
-#ifdef INTEL_FAPI
-   if(lwrMacCb.phyState == PHY_STATE_CONFIGURED)
-   {
-      l1HdlSlotIndicaion(FALSE);
-      MAC_FREE(msg, msgLen);
-   }
-   else
-   {
-      DU_LOG("\nPHY_STUB: Received Start Req in PHY State %d", lwrMacCb.phyState);
-      MAC_FREE(msg, msgLen);
-      return RFAILED;
-   }
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Handles Dl Tti request received from MAC
- *
- * @details
- *
- *    Function : l1HdlDlTtiReq
- *
- *    Functionality:
- *          -Handles Dl Tti request received from MAC
- *
- * @params[in]   Message length
- *               Dl Tti request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-S16 l1HdlDlTtiReq(uint16_t msgLen, void *msg)
-{
-#ifdef INTEL_FAPI
-   p_fapi_api_queue_elem_t dlTtiElem = (p_fapi_api_queue_elem_t)msg;
-   fapi_dl_tti_req_t *dlTtiReq = (fapi_dl_tti_req_t *)(dlTtiElem +1);
-   
-   uint8_t pduCount = 0;
-
-#ifdef ODU_SLOT_IND_DEBUG_LOG
-   if(dlTtiReq->nPdus == 0)
-   {
-      DU_LOG("\nPHY_STUB: No PDU in DL TTI Request");
-   }
-   else
-   {  
-     DU_LOG("\nPHY STUB: DL TTI Request at sfn=%d slot=%d",dlTtiReq->sfn,dlTtiReq->slot);
-   }
-#endif 
-
-   for(pduCount=0; pduCount<dlTtiReq->nPdus; pduCount++)
-   {
-      if(dlTtiReq->pdus[pduCount].pduType == 3) //SSB_PDU_TYPE
-      {
-         DU_LOG("\nPHY_STUB: SSB PDU");
-      }
-      else if(dlTtiReq->pdus[pduCount].pduType == 0)
-      {
-        DU_LOG("\nPHY_STUB: PDCCH PDU");
-        if(dlTtiReq->pdus[pduCount].pdu.pdcch_pdu.\
-           coreSetType == 1)
-        {
-           dlDedMsg = true;
-        }
-      }
-      else if(dlTtiReq->pdus[pduCount].pduType == 1)
-      {
-         DU_LOG("\nPHY_STUB: PDSCH PDU");
-      }
-   }
-
-   /* Free FAPI message */
-   MAC_FREE(msg, msgLen);
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Handles tx_data request received from MAC
- *
- * @details
- *
- *    Function : l1HdlTxDataReq
- *
- *    Functionality:
- *          -Handles tx_data request received from MAC
- *
- * @params[in]   Message length
- *               tx_data request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-S16 l1HdlTxDataReq(uint16_t msgLen, void *msg)
-{
-#ifdef INTEL_FAPI
-   p_fapi_api_queue_elem_t txDataElem = (p_fapi_api_queue_elem_t)msg;
-   fapi_tx_data_req_t *txDataReq = (fapi_tx_data_req_t *)(txDataElem +1);
-
-   DU_LOG("\nPHY STUB: TX DATA Request at sfn=%d slot=%d",txDataReq->sfn,txDataReq->slot);
-   if(dlDedMsg)
-   {
-      DU_LOG("\nPHY_STUB: TxDataPdu for DED MSG sent");
-      dlDedMsg = false;
-   }
-   MAC_FREE(msg, msgLen);
-#endif
-   return ROK;
-}
-
-#ifdef INTEL_FAPI
-/*******************************************************************
- *
- * @brief Fills Uci Ind Pdu Info carried on Pucch Format 0/Format 1
- *
- * @details
- *
- *    Function : fillPucchF0F1PduInfo
- *
- *    Functionality:
- *       Fills Uci Ind Pdu Info carried on Pucch Format 0/Format 1 
- *
- * @params[in] fapi_uci_o_pucch_f0f1_t *
- *             pucchPdu
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-uint8_t fillPucchF0F1PduInfo(fapi_uci_o_pucch_f0f1_t *pduInfo, fapi_ul_pucch_pdu_t pucchPdu)
-{
-   uint8_t idx = 0;
-
-   pduInfo->handle = pucchPdu.handle;
-   pduInfo->pduBitmap = 1;  //hardcoded for SR
-   pduInfo->pucchFormat = pucchPdu.formatType;
-   pduInfo->ul_cqi = 0;
-   pduInfo->rnti = pucchPdu.rnti;
-   pduInfo->timingAdvance = 0;
-   pduInfo->rssi = 0;
-   if(pduInfo->pduBitmap & SR_PDU_BITMASK)
-   {
-      pduInfo->srInfo.srIndication = SR_DETECTED;
-      pduInfo->srInfo.srConfidenceLevel = CONFDC_LEVEL_GOOD;
-   }
-   if(pduInfo->pduBitmap & HARQ_PDU_BITMASK)
-   {
-      pduInfo->harqInfo.numHarq++;
-      pduInfo->harqInfo.harqConfidenceLevel = CONFDC_LEVEL_GOOD;
-      for(idx = 0; idx < pduInfo->harqInfo.numHarq; idx++)
-      {
-         pduInfo->harqInfo.harqValue[idx] = HARQ_PASS;
-      }
-   }
-   return ROK;
-}
-/*******************************************************************
- *
- * @brief Fills UCI Pdu Information
- *
- * @details
- *
- *    Function : fillUciPduInfo
- *
- *    Functionality:
- *       Fills UCI Pdu Information
- *
- * @params[in] Pointer to uciPdu
- *             pucchPdu
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-uint8_t fillUciPduInfo(fapi_uci_pdu_info_t *uciPdu, fapi_ul_pucch_pdu_t pucchPdu)
-{
-   uint8_t ret = ROK;
-
-   /*TODO: The pduType is hardcoded here to support 
-     UCI Ind for PUCCH forat0/format1. This is to be
-     modified when we get SR form UE */
-   uciPdu->pduType = UCI_IND_PUCCH_F0F1;
-   switch(uciPdu->pduType)
-   {
-      case UCI_IND_PUSCH:
-         break;
-      case UCI_IND_PUCCH_F0F1:
-         {
-            fapi_uci_o_pucch_f0f1_t *pduInfo = NULLP;
-
-            pduInfo = &uciPdu->uci.uciPucchF0F1;
-            ret = fillPucchF0F1PduInfo(pduInfo, pucchPdu);
-            uciPdu->pduSize = sizeof(fapi_uci_o_pucch_f0f1_t);
-         }
-         break;
-      case UCI_IND_PUCCH_F2F3F4:
-         break;
-      default:
-         DU_LOG("\nPHY_STUB: Invalid Pdu Type %d", uciPdu->pduType);
-         break;
-   }
-   return ret;
-}
-
-/*******************************************************************
- *
- * @brief Build and send Uci indication
- *
- * @details
- *
- *    Function : l1BuildAndSendUciInd
- *
- *    Functionality:
- *       Build and send Uci indication
- *
- * @params[in] SFN
- *             Slot
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-uint8_t l1BuildAndSendUciInd(uint16_t slot, uint16_t sfn, fapi_ul_pucch_pdu_t pucchPdu)
-{
-   uint8_t uciIdx = 0;
-   uint8_t nUciPdus = 0;
-   uint8_t ret = ROK;
-   uint32_t msgLen = 0;
-   fapi_uci_indication_t *uciInd =  NULLP;
-
-   MAC_ALLOC(uciInd, sizeof(fapi_uci_indication_t));
-   if(!uciInd)
-   {
-      printf("\nPHY_STUB: Memory allocation failed for UCI Indication");
-      return RFAILED;
-   }
-   memset(uciInd, 0, sizeof(fapi_uci_indication_t));
-   uciInd->sfn = sfn;
-   uciInd->slot = slot;
-   uciInd->numUcis = 1;   //consdering the UCI Ind for SR
-   nUciPdus = uciInd->numUcis;
-   while(nUciPdus)
-   {
-      ret = fillUciPduInfo(&uciInd->uciPdu[uciIdx], pucchPdu);
-      uciIdx++;
-      nUciPdus--;
-   }
-   if(ret == ROK)
-   {
-      msgLen = sizeof(fapi_uci_indication_t)- sizeof(fapi_msg_t);
-      fillMsgHeader(&uciInd->header, FAPI_UCI_INDICATION, msgLen);
-
-      /* Sending UCI indication to MAC */
-      DU_LOG("\nPHY STUB: Sending UCI Indication to MAC");
-      procPhyMessages(uciInd->header.msg_id, sizeof(fapi_uci_indication_t), (void *)uciInd);
-   }
-   MAC_FREE(uciInd, sizeof(fapi_uci_indication_t));
-   return ret;
-}
-#endif
-
-/*******************************************************************
- *
- * @brief Handles Ul Tti request received from MAC
- *
- * @details
- *
- *    Function : l1HdlUlTtiReq
- *
- *    Functionality:
- *          -Handles Ul Tti request received from MAC
- *
- * @params[in]   Message length
- *               Ul Tti request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-S16 l1HdlUlTtiReq(uint16_t msgLen, void *msg)
-{
-#ifdef INTEL_FAPI
-   p_fapi_api_queue_elem_t ulTtiElem = (p_fapi_api_queue_elem_t)msg;
-   fapi_ul_tti_req_t *ulTtiReq = (fapi_ul_tti_req_t *)(ulTtiElem +1);
-   uint8_t numPdus = ulTtiReq->nPdus;
-
-#ifdef ODU_SLOT_IND_DEBUG_LOG
-   if(numPdus == 0)
-   {
-      DU_LOG("\nPHY STUB: No PDU received in UL TTI Req");
-   }
-   else
-   {
-      DU_LOG("\nPHY STUB: Received UL TTI Request");
-   }
-#endif 
-
-   while(numPdus)
-   {
-      if(ulTtiReq->pdus[numPdus-1].pduType == 0)
-      {
-        DU_LOG("\nPHY STUB: PRACH PDU");
-      }
-      if(ulTtiReq->pdus[numPdus-1].pduType == 1)
-      {
-        DU_LOG("\nPHY STUB: PUSCH PDU");
-        l1BuildAndSendRxDataInd(ulTtiReq->slot, ulTtiReq->sfn, \
-              ulTtiReq->pdus[numPdus-1].pdu.pusch_pdu); 
-      }
-      if(ulTtiReq->pdus[numPdus-1].pduType == 2)
-      {
-        DU_LOG("\nPHY STUB: PUCCH PDU");
-         fapi_ul_tti_req_t ulTtiSlotInd;
-        memset(&ulTtiSlotInd, 0, sizeof(fapi_ul_tti_req_t));
-        ulTtiSlotInd.slot = ulTtiReq->slot;
-        ulTtiSlotInd.sfn  = ulTtiReq->sfn;
-         ADD_DELTA_TO_TIME(ulTtiSlotInd, ulTtiSlotInd, SLOT_DELAY);
-        l1BuildAndSendUciInd(ulTtiSlotInd.slot, ulTtiSlotInd.sfn, \
-              ulTtiReq->pdus[numPdus-1].pdu.pucch_pdu);
-      }
-      numPdus--;
-   }
-
-   if(rachIndSent == false && ulTtiReq->sfn == 2 && ulTtiReq->slot == 6)
-   {
-      rachIndSent = true;
-      l1BuildAndSendRachInd(ulTtiReq->slot, ulTtiReq->sfn);
-   }
-
-   MAC_FREE(msg, msgLen);
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Builds and Send the stop Indication message to MAC
- *
- * @details
- *
- *    Function : l1BuildAndSendStopInd
- *
- *    Functionality:
- *          -Send the Stop indication Message to MAC
- *
- *
- * @return void
- *
- * ****************************************************************/
-uint16_t l1BuildAndSendStopInd()
-{
-#ifdef INTEL_FAPI
-   fapi_stop_ind_t *stopIndMsg = NULLP;
-   uint32_t msgLen = 0;
-
-   MAC_ALLOC(stopIndMsg, sizeof(fapi_stop_ind_t));
-   if(!stopIndMsg)
-   {
-      DU_LOG("\nPHY_STUB: Memory allocation failed for stop Indication Message");
-      return RFAILED;
-   }
-   else
-   {
-      fillMsgHeader(&stopIndMsg->header, FAPI_STOP_INDICATION, msgLen);
-      DU_LOG("\n\nPHY_STUB: Processing Stop indication to MAC");
-      procPhyMessages(stopIndMsg->header.msg_id,\
-           sizeof(fapi_stop_ind_t), (void*)stopIndMsg);
-      MAC_FREE(stopIndMsg, sizeof(fapi_stop_ind_t));
-   }
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Handles stop request received from MAC
- *
- * @details
- *
- *    Function : l1HdlStopReq
- *
- *    Functionality:
- *          -Handles stop request received from MAC
- *
- * @params[in]   Message length
- *               stop request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-S16 l1HdlStopReq(uint32_t msgLen, void *msg)
-{
-#ifdef INTEL_FAPI
-   if(lwrMacCb.phyState == PHY_STATE_RUNNING)
-   {
-      l1HdlSlotIndicaion(TRUE);
-      DU_LOG("\nPHY_STUB: Slot Indication is stopped successfully");
-      l1BuildAndSendStopInd();
-      MAC_FREE(msg, msgLen);
-   }
-   else
-   {
-      DU_LOG("\nPHY_STUB: Received Stop Req in PHY State %d", lwrMacCb.phyState);
-      MAC_FREE(msg, msgLen);
-      return RFAILED;
-   }
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Build And Send Rx Data Ind for Msg5
- *
- * @details
- *
- *    Function : l1BuildAndSendMsg5
- *
- *    Functionality: Build And Send Rx Data Ind for Msg5
- *
- * @params[in] SFN
- *             Slot
- * @return ROK     - success
- *         RFAILED - failure
- *
- * ****************************************************************/
-uint8_t l1BuildAndSendMsg5(uint16_t sfn, uint16_t slot)
-{   
-#ifdef INTEL_FAPI
-   uint8_t idx = 0;
-   fapi_rx_data_indication_t *rxDataInd;
-   fapi_pdu_ind_info_t       *pduInfo;
-   uint8_t  *pdu;
-   uint16_t byteIdx = 0;
-   uint32_t msgLen = 0;
-
-   MAC_ALLOC(rxDataInd, sizeof(fapi_rx_data_indication_t));
-   if(!rxDataInd)
-   {
-      printf("\nPHY_STUB: Memory allocation failed for Rx Data Indication for msg5");
-      return RFAILED;
-   }
-   memset(rxDataInd, 0, sizeof(fapi_rx_data_indication_t));
-
-   /* TODO: Fill the required values */
-   msgLen = sizeof(fapi_rx_data_indication_t) - sizeof(fapi_msg_t);
-   rxDataInd->sfn = sfn;
-   rxDataInd->slot = slot;
-   rxDataInd->numPdus = 1;
-
-   pduInfo = &rxDataInd->pdus[idx];
-   pduInfo->handle = 100;
-   pduInfo->rnti = 100;
-   pduInfo->harqId = 1;
-   pduInfo->pdu_length = 25;
-   pduInfo->ul_cqi = 0;
-   pduInfo->timingAdvance = 0;
-   pduInfo->rssi = 0;
-
-   /* Filling pdu with random values for testing */
-   pduInfo->pduData = NULL;
-   MAC_ALLOC(pduInfo->pduData, pduInfo->pdu_length);
-   if(!pduInfo->pduData)
-   {
-      printf("\nPHY_STUB: Memory allocation failed for Rx Data Pdu");
-      return RFAILED;
-   }
-
-   /* Filling PDU */
-   pdu = (uint8_t *)pduInfo->pduData;
-
-   uint8_t  msg5PduLen = 33;
-   /* For RRC setup complete
-      MAC subheader format is R/F/LCId/L (2/3 bytes)
-      LCId is 1 for SRB1
-      L is length of PDU i.e 6bytes here
-      From 38.321 section 6.1.1
-    */
-   uint8_t msg5[] = {1, msg5PduLen, 0, 0, 16, 0, 5, 223, 128, 16, 94, \
-      64, 3, 64, 89, 61, 138, 64, 0, 0, 0, 4, 0, 0, 4, 68, 11, 128, \
-        184, 56, 0, 0, 0, 0, 0};
-
-   msg5PduLen += 2;  /* 2bytes of header */
-   memcpy(pdu, &msg5, msg5PduLen);
-   byteIdx += msg5PduLen; /* 2 bytes of header */
-
-   /* Filling MAC SDU for Padding bytes*/
-   if(byteIdx < pduInfo->pdu_length)
-   {
-      /* For Padding
-        MAC subheader format is R/R/LCId (1byte)
-        LCId is 63 for padding
-        From 38.321 section 6.1.1
-       */
-      pdu[byteIdx++] = 63;
-
-      for(; byteIdx < pduInfo->pdu_length; byteIdx++)
-        pdu[byteIdx] = 0;
-   }
-   msgLen += pduInfo->pdu_length;
-
-   fillMsgHeader(&rxDataInd->header, FAPI_RX_DATA_INDICATION, msgLen);
-
-   /* Sending Rx data indication to MAC */
-   DU_LOG("\nPHY STUB: Sending Rx data Indication to MAC");
-   procPhyMessages(rxDataInd->header.msg_id, sizeof(fapi_rx_data_indication_t), (void *)rxDataInd);
-
-   if(pduInfo->pdu_length)
-      MAC_FREE(pduInfo->pduData, pduInfo->pdu_length);
-   MAC_FREE(rxDataInd, sizeof(fapi_rx_data_indication_t));
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Handles Ul Dci request received from MAC
- *
- * @details
- *
- *    Function : l1HdlUlDciReq
- *
- *    Functionality:
- *          -Handles Ul Dci request received from MAC
- *
- * @params[in]   Message length
- *               Ul Dci request message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-S16 l1HdlUlDciReq(uint16_t msgLen, void *msg)
-{
-#ifdef INTEL_FAPI
-   p_fapi_api_queue_elem_t ulDciElem = (p_fapi_api_queue_elem_t)msg;
-   fapi_ul_dci_req_t *ulDciReq = (fapi_ul_dci_req_t *)(ulDciElem +1);
-   uint8_t numPdus = ulDciReq->numPdus;
-
-   while(numPdus)
-   {
-      if(ulDciReq->pdus[numPdus-1].pduType == 0)
-      {
-        DU_LOG("\nPHY STUB: Received UL DCI Request for PDCCH PDU");
-        //l1BuildAndSendMsg5(ulDciReq->sfn, ulDciReq->slot);
-        //msg5Sent = true;
-      }
-      numPdus--;
-   }
-
-   MAC_FREE(msg, msgLen);
-#endif
-   return ROK;
-}
-
-/*******************************************************************
- *
- * @brief Receives message from MAC
- *
- * @details
- *
- *    Function :  l1ProcessFapiRequest
- *
- *    Functionality:
- *       - Receives message from MAC and calls handler
- *
- * @params[in] Message type
- *             Message length
- *             Message pointer
- *
- * @return void
- *
- * ****************************************************************/
-
-void l1ProcessFapiRequest(uint8_t msgType, uint32_t msgLen, void *msg)
-{
-   switch(msgType)
-   {
-#ifdef INTEL_FAPI
-      case FAPI_PARAM_REQUEST:
-        l1HdlParamReq(msgLen, msg);
-        break;
-      case FAPI_CONFIG_REQUEST:
-        l1HdlConfigReq(msgLen, msg);
-        break;
-      case FAPI_START_REQUEST:
-        l1HdlStartReq(msgLen, msg);
-        break;
-      case FAPI_DL_TTI_REQUEST:
-        l1HdlDlTtiReq(msgLen, msg);
-        break;
-      case FAPI_TX_DATA_REQUEST:
-        l1HdlTxDataReq(msgLen, msg);
-        break;
-      case FAPI_UL_TTI_REQUEST:
-        l1HdlUlTtiReq(msgLen, msg);
-        break;
-      case FAPI_STOP_REQUEST:
-        l1HdlStopReq(msgLen, msg);
-        break;
-      case FAPI_UL_DCI_REQUEST:
-        l1HdlUlDciReq(msgLen, msg);
-        break;
-      default:
-        DU_LOG("\nPHY_STUB: Invalid message type[%x] received at PHY", msgType);
-        break;
-#endif
-   }
-}
-/**********************************************************************
-  End of file
- **********************************************************************/