--- /dev/null
+// :vi sw=4 ts=4 noet:
+/*
+==================================================================================
+ Copyright (c) 2019 Nokia
+ Copyright (c) 2018-2019 AT&T Intellectual Property.
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+==================================================================================
+*/
+
+/*
+ Mnemonic: rmr.c
+ Abstract: The bulk of the ric message routing library which is built upon
+ the older nanomsg messaging transport mehhanism.
+
+ To "hide" internal functions the choice was made to implement them
+ all as static functions. This means that we include nearly
+ all of our modules here as 90% of the library is not visible to
+ the outside world.
+
+ Author: E. Scott Daniels
+ Date: 28 November 2018
+*/
+
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <netdb.h>
+#include <errno.h>
+#include <string.h>
+#include <errno.h>
+#include <pthread.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <time.h>
+#include <arpa/inet.h>
+
+#include <nanomsg/nn.h>
+#include <nanomsg/tcp.h>
+#include <nanomsg/pair.h>
+#include <nanomsg/pipeline.h>
+#include <nanomsg/pubsub.h>
+
+#include "rmr.h" // things the users see
+#include "rmr_agnostic.h" // headers agnostic to the underlying transport mechanism
+#include "rmr_private.h" // things that we need too
+#include "rmr_symtab.h"
+
+#include "ring_static.c" // message ring support
+#include "rt_generic_static.c" // generic route table (not nng/nano specific)
+#include "rtable_static.c" // route table things (nano specific)
+#include "rtc_static.c" // common rt collector
+#include "tools_static.c"
+#include "sr_static.c" // send/receive static functions
+#include "wormholes.c" // external wormhole api, and it's static functions (must be LAST)
+
+// ------------------------------------------------------------------------------------------------------
+
+/*
+ Clean up a context.
+*/
+static void free_ctx( uta_ctx_t* ctx ) {
+ if( ctx ) {
+ if( ctx->rtg_addr ) {
+ free( ctx->rtg_addr );
+ }
+ }
+}
+
+// --------------- public functions --------------------------------------------------------------------------
+
+/*
+ Set the receive timeout to time. If time >1000 we assume the time is milliseconds,
+ else we assume seconds. Setting -1 is always block.
+ Returns the nn value (0 on success <0 on error).
+*/
+extern int rmr_set_rtimeout( void* vctx, int time ) {
+ uta_ctx_t* ctx;
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL ) {
+ errno = EINVAL;
+ return -1;
+ }
+
+ if( time > 0 ) {
+ if( time < 1000 ) {
+ time = time * 1000; // assume seconds, nn wants ms
+ }
+ }
+
+ return nn_setsockopt( ctx->nn_sock, NN_SOL_SOCKET, NN_RCVTIMEO, &time, sizeof( time ) );
+}
+
+/*
+ Deprecated -- use rmr_set_rtimeout()
+*/
+extern int rmr_rcv_to( void* vctx, int time ) {
+ return rmr_rcv_to( vctx, time );
+}
+
+
+/*
+ Set the send timeout to time. If time >1000 we assume the time is milliseconds,
+ else we assume seconds. Setting -1 is always block.
+ Returns the nn value (0 on success <0 on error).
+*/
+extern int rmr_set_stimeout( void* vctx, int time ) {
+ uta_ctx_t* ctx;
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL ) {
+ errno = EINVAL;
+ return -1;
+ }
+
+ if( time > 0 ) {
+ if( time < 1000 ) {
+ time = time * 1000; // assume seconds, nn wants ms
+ }
+ }
+
+ return nn_setsockopt( ctx->nn_sock, NN_SOL_SOCKET, NN_SNDTIMEO, &time, sizeof( time ) );
+}
+
+/*
+ Deprecated -- use rmr_set_stimeout()
+*/
+extern int rmr_send_to( void* vctx, int time ) {
+ return rmr_send_to( vctx, time );
+}
+
+/*
+ Returns the size of the payload (bytes) that the msg buffer references.
+ Len in a message is the number of bytes which were received, or should
+ be transmitted, however, it is possible that the mbuf was allocated
+ with a larger payload space than the payload length indicates; this
+ function returns the absolute maximum space that the user has available
+ in the payload. On error (bad msg buffer) -1 is returned and errno should
+ indicate the rason.
+*/
+extern int rmr_payload_size( rmr_mbuf_t* msg ) {
+ if( msg == NULL || msg->header == NULL ) {
+ errno = EINVAL;
+ return -1;
+ }
+
+ errno = 0;
+ return msg->alloc_len - sizeof( uta_mhdr_t ); // figure size should we not have a msg buffer
+}
+
+/*
+ Allocates a send message as a zerocopy message allowing the underlying message protocol
+ to send the buffer without copy.
+*/
+extern rmr_mbuf_t* rmr_alloc_msg( void* vctx, int size ) {
+ uta_ctx_t* ctx;
+ rmr_mbuf_t* m;
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL ) {
+ return NULL;
+ }
+
+ m = alloc_zcmsg( ctx, NULL, size, 0 );
+ return m;
+}
+
+/*
+ Return the message to the available pool, or free it outright.
+*/
+extern void rmr_free_msg( rmr_mbuf_t* mbuf ) {
+ if( mbuf == NULL ) {
+ return;
+ }
+
+ if( mbuf->header ) {
+ if( mbuf->flags & MFL_ZEROCOPY ) {
+ nn_freemsg( mbuf->header ); // must let nano free it
+ } else {
+ free( mbuf->header );
+ }
+ }
+
+ free( mbuf );
+}
+
+/*
+ Accept a message and send it to an endpoint based on message type.
+ Allocates a new message buffer for the next send. If a message type has
+ more than one group of endpoints defined, then the message will be sent
+ in round robin fashion to one endpoint in each group.
+
+ CAUTION: this is a non-blocking send. If the message cannot be sent, then
+ it will return with an error and errno set to eagain. If the send is
+ a limited fanout, then the returned status is the status of the last
+ send attempt.
+*/
+extern rmr_mbuf_t* rmr_send_msg( void* vctx, rmr_mbuf_t* msg ) {
+ int nn_sock; // endpoint socket for send
+ uta_ctx_t* ctx;
+ int group; // selected group to get socket for
+ int send_again; // true if the message must be sent again
+ rmr_mbuf_t* clone_m; // cloned message for an nth send
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL || msg == NULL ) { // bad stuff, bail fast
+ errno = EINVAL; // if msg is null, this is their clue
+ if( msg != NULL ) {
+ msg->state = RMR_ERR_BADARG;
+ errno = EINVAL; // must ensure it's not eagain
+ }
+ return msg;
+ }
+
+ errno = 0; // clear; nano might set, but ensure it's not left over if it doesn't
+ if( msg->header == NULL ) {
+ fprintf( stderr, "[ERR] rmr_send_msg: message had no header\n" );
+ msg->state = RMR_ERR_NOHDR;
+ errno = EBADMSG; // must ensure it's not eagain
+ return msg;
+ }
+
+ send_again = 1; // force loop entry
+ group = 0; // always start with group 0
+
+ while( send_again ) {
+ nn_sock = uta_epsock_rr( ctx->rtable, msg->mtype, group, &send_again ); // round robin select endpoint; again set if mult groups
+ if( DEBUG ) fprintf( stderr, "[DBUG] send msg: type=%d again=%d group=%d socket=%d len=%d\n",
+ msg->mtype, send_again, group, nn_sock, msg->len );
+ group++;
+
+ if( nn_sock < 0 ) {
+ msg->state = RMR_ERR_NOENDPT;
+ errno = ENXIO; // must ensure it's not eagain
+ return msg; // caller can resend (maybe) or free
+ }
+
+ if( send_again ) {
+ clone_m = clone_msg( msg ); // must make a copy as once we send this message is not available
+ if( DEBUG ) fprintf( stderr, "[DBUG] msg cloned: type=%d len=%d\n", msg->mtype, msg->len );
+ msg->flags |= MFL_NOALLOC; // send should not allocate a new buffer
+ msg = send_msg( ctx, msg, nn_sock ); // do the hard work, msg should be nil on success
+ /*
+ if( msg ) {
+ // error do we need to count successes/errors, how to report some success, esp if last fails?
+ }
+ */
+
+ msg = clone_m; // clone will be the next to send
+ } else {
+ msg = send_msg( ctx, msg, nn_sock ); // send the last, and allocate a new buffer; drops the clone if it was
+ }
+ }
+
+ return msg; // last message caries the status of last/only send attempt
+}
+
+/*
+ Return to sender allows a message to be sent back to the endpoint where it originated.
+ The source information in the message is used to select the socket on which to write
+ the message rather than using the message type and round-robin selection. This
+ should return a message buffer with the state of the send operation set. On success
+ (state is RMR_OK, the caller may use the buffer for another receive operation), and on
+ error it can be passed back to this function to retry the send if desired. On error,
+ errno will liklely have the failure reason set by the nanomsg send processing.
+ The following are possible values for the state in the message buffer:
+
+ Message states returned:
+ RMR_ERR_BADARG - argument (context or msg) was nil or invalid
+ RMR_ERR_NOHDR - message did not have a header
+ RMR_ERR_NOENDPT- an endpoint to send the message to could not be determined
+ RMR_ERR_SENDFAILED - send failed; errno has nano error code
+ RMR_ERR_RETRY - operation failed, but caller should retry
+
+ A nil message as the return value is rare, and generally indicates some kind of horrible
+ failure. The value of errno might give a clue as to what is wrong.
+
+ CAUTION:
+ Like send_msg(), this is non-blocking and will return the msg if there is an errror.
+ The caller must check for this and handle.
+*/
+extern rmr_mbuf_t* rmr_rts_msg( void* vctx, rmr_mbuf_t* msg ) {
+ int nn_sock; // endpoint socket for send
+ uta_ctx_t* ctx;
+ int state;
+ uta_mhdr_t* hdr;
+ char* hold_src; // we need the original source if send fails
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL || msg == NULL ) { // bad stuff, bail fast
+ errno = EINVAL; // if msg is null, this is their clue
+ if( msg != NULL ) {
+ msg->state = RMR_ERR_BADARG;
+ }
+ return msg;
+ }
+
+ errno = 0; // at this point any bad state is in msg returned
+ if( msg->header == NULL ) {
+ fprintf( stderr, "rmr_send_msg: ERROR: message had no header\n" );
+ msg->state = RMR_ERR_NOHDR;
+ return msg;
+ }
+
+ nn_sock = uta_epsock_byname( ctx->rtable, (char *) ((uta_mhdr_t *)msg->header)->src ); // socket of specific endpoint
+ if( nn_sock < 0 ) {
+ msg->state = RMR_ERR_NOENDPT;
+ return msg; // preallocated msg can be reused since not given back to nn
+ }
+
+ hold_src = strdup( (char *) ((uta_mhdr_t *)msg->header)->src ); // the dest where we're returning the message to
+ strncpy( (char *) ((uta_mhdr_t *)msg->header)->src, ctx->my_name, RMR_MAX_SID ); // must overlay the source to be ours
+ msg = send_msg( ctx, msg, nn_sock );
+ if( msg ) {
+ strncpy( (char *) ((uta_mhdr_t *)msg->header)->src, hold_src, RMR_MAX_SID ); // always return original source so rts can be called again
+ msg->flags |= MFL_ADDSRC; // if msg given to send() it must add source
+ }
+
+ free( hold_src );
+ return msg;
+}
+
+/*
+ Call sends the message based on message routing using the message type, and waits for a
+ response message to arrive with the same transaction id that was in the outgoing message.
+ If, while wiating for the expected response, messages are received which do not have the
+ desired transaction ID, they are queued. Calls to uta_rcv_msg() will dequeue them in the
+ order that they were received.
+
+ Normally, a message struct pointer is returned and msg->state must be checked for RMR_OK
+ to ensure that no error was encountered. If the state is UTA_BADARG, then the message
+ may be resent (likely the context pointer was nil). If the message is sent, but no
+ response is received, a nil message is returned with errno set to indicate the likley
+ issue:
+ ETIMEDOUT -- too many messages were queued before reciving the expected response
+ ENOBUFS -- the queued message ring is full, messages were dropped
+ EINVAL -- A parameter was not valid
+ EAGAIN -- the underlying message system wsa interrupted or the device was busy;
+ user should call this function with the message again.
+
+
+ QUESTION: should user specify the number of messages to allow to queue?
+*/
+extern rmr_mbuf_t* rmr_call( void* vctx, rmr_mbuf_t* msg ) {
+ uta_ctx_t* ctx;
+ unsigned char expected_id[RMR_MAX_XID+1]; // the transaction id in the message; we wait for response with same ID
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL || msg == NULL ) { // bad stuff, bail fast
+ if( msg != NULL ) {
+ msg->state = RMR_ERR_BADARG;
+ }
+ return msg;
+ }
+
+ memcpy( expected_id, msg->xaction, RMR_MAX_XID );
+ expected_id[RMR_MAX_XID] = 0; // ensure it's a string
+ if( DEBUG > 1 ) fprintf( stderr, "[DBUG] rmr_call is making call, waiting for (%s)\n", expected_id );
+ errno = 0;
+ msg->flags |= MFL_NOALLOC; // we don't need a new buffer from send
+
+ msg = rmr_send_msg( ctx, msg );
+ if( msg ) { // msg should be nil, if not there was a problem; return buffer to user
+ if( msg->state != RMR_ERR_RETRY ) {
+ msg->state = RMR_ERR_CALLFAILED; // don't stomp if send_msg set retry
+ }
+ return msg;
+ }
+
+ return rmr_rcv_specific( ctx, NULL, (char *) expected_id, 20 ); // wait for msg allowing 20 to queue ahead
+}
+
+/*
+ The outward facing receive function. When invoked it will pop the oldest message
+ from the receive ring, if any are queued, and return it. If the ring is empty
+ then the receive function is invoked to wait for the next message to arrive (blocking).
+
+ If old_msg is provided, it will be populated (avoiding lots of free/alloc cycles). If
+ nil, a new one will be allocated. However, the caller should NOT expect to get the same
+ struct back (if a queued message is returned the message struct will be different).
+*/
+extern rmr_mbuf_t* rmr_rcv_msg( void* vctx, rmr_mbuf_t* old_msg ) {
+ uta_ctx_t* ctx;
+ rmr_mbuf_t* qm; // message that was queued on the ring
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL ) {
+ if( old_msg != NULL ) {
+ old_msg->state = RMR_ERR_BADARG;
+ }
+ errno = EINVAL;
+ return old_msg;
+ }
+ errno = 0;
+
+ qm = (rmr_mbuf_t *) uta_ring_extract( ctx->mring ); // pop if queued
+ if( qm != NULL ) {
+ if( old_msg ) {
+ rmr_free_msg( old_msg ); // future: push onto a free list???
+ }
+
+ return qm;
+ }
+
+ return rcv_msg( ctx, old_msg ); // nothing queued, wait for one
+}
+
+/*
+ Receive with a timeout. This is a convenience function when sitting on top of
+ nanomsg as it just sets the rcv timeout and calls rmr_rcv_msg().
+*/
+extern rmr_mbuf_t* rmr_torcv_msg( void* vctx, rmr_mbuf_t* old_msg, int ms_to ) {
+ rmr_set_rtimeout( vctx, ms_to );
+ return rmr_rcv_msg( vctx, old_msg );
+}
+
+
+/*
+ This blocks until the message with the 'expect' ID is received. Messages which are received
+ before the expected message are queued onto the message ring. The function will return
+ a nil message and set errno to ETIMEDOUT if allow2queue messages are received before the
+ expected message is received. If the queued message ring fills a nil pointer is returned
+ and errno is set to ENOBUFS.
+
+ Generally this will be invoked only by the call() function as it waits for a response, but
+ it is exposed to the user application as three is no reason not to.
+*/
+extern rmr_mbuf_t* rmr_rcv_specific( void* vctx, rmr_mbuf_t* msg, char* expect, int allow2queue ) {
+ uta_ctx_t* ctx;
+ int queued = 0; // number we pushed into the ring
+ int exp_len = 0; // length of expected ID
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL ) {
+ if( msg != NULL ) {
+ msg->state = RMR_ERR_BADARG;
+ }
+ errno = EINVAL;
+ return msg;
+ }
+
+ errno = 0;
+
+ if( expect == NULL || ! *expect ) { // nothing expected if nil or empty string, just receive
+ return rmr_rcv_msg( ctx, msg );
+ }
+
+ exp_len = strlen( expect );
+ if( exp_len > RMR_MAX_XID ) {
+ exp_len = RMR_MAX_XID;
+ }
+ if( DEBUG ) fprintf( stderr, "[DBUG] rcv_specific waiting for id=%s\n", expect );
+
+ while( queued < allow2queue ) {
+ msg = rcv_msg( ctx, msg ); // hard wait for next
+ if( msg->state == RMR_OK ) {
+ if( memcmp( msg->xaction, expect, exp_len ) == 0 ) { // got it -- return it
+ if( DEBUG ) fprintf( stderr, "[DBUG] rcv-specific matched (%s); %d messages were queued\n", msg->xaction, queued );
+ return msg;
+ }
+
+ if( ! uta_ring_insert( ctx->mring, msg ) ) { // just queue, error if ring is full
+ if( DEBUG > 1 ) fprintf( stderr, "[DBUG] rcv_specific ring is full\n" );
+ errno = ENOBUFS;
+ return NULL;
+ }
+
+ if( DEBUG ) fprintf( stderr, "[DBUG] rcv_specific queued message type=%d\n", msg->mtype );
+ queued++;
+ msg = NULL;
+ }
+ }
+
+ if( DEBUG ) fprintf( stderr, "[DBUG] rcv_specific timeout waiting for %s\n", expect );
+ errno = ETIMEDOUT;
+ return NULL;
+}
+
+
+/*
+ Initialise the message routing environment. Flags are one of the UTAFL_
+ constants. Proto_port is a protocol:port string (e.g. tcp:1234). If default protocol
+ (tcp) to be used, then :port is all that is needed.
+
+ At the moment it seems that TCP really is the only viable protocol, but
+ we'll allow flexibility.
+
+ The return value is a void pointer which must be passed to most uta functions. On
+ error, a nil pointer is returned and errno should be set.
+*/
+static void* init( char* uproto_port, int max_msg_size, int flags ) {
+ uta_ctx_t* ctx = NULL;
+ char bind_info[NN_SOCKADDR_MAX]; // bind info
+ char* proto = "tcp"; // pointer into the proto/port string user supplied
+ char* port;
+ char* proto_port;
+ char wbuf[1024]; // work buffer
+ char* tok; // pointer at token in a buffer
+ int state;
+ char* interface = NULL; // interface to bind to pulled from RMR_BIND_IF if set
+
+ fprintf( stderr, "[INFO] ric message routing library on nanomsg (%s %s.%s.%s built: %s)\n",
+ QUOTE_DEF(GIT_ID), QUOTE_DEF(MAJOR_VER), QUOTE_DEF(MINOR_VER), QUOTE_DEF(PATCH_VER), __DATE__ );
+
+ errno = 0;
+ if( uproto_port == NULL ) {
+ proto_port = strdup( "tcp:4567" );
+ } else {
+ proto_port = strdup( uproto_port ); // so we can modify it
+ }
+
+ if( (ctx = (uta_ctx_t *) malloc( sizeof( uta_ctx_t ) )) == NULL ) {
+ errno = ENOMEM;
+ return NULL;
+ }
+ memset( ctx, 0, sizeof( uta_ctx_t ) );
+
+
+ ctx->mring = uta_mk_ring( 128 ); // message ring to hold asynch msgs received while waiting for call response
+
+ ctx->max_plen = RMR_MAX_RCV_BYTES + sizeof( uta_mhdr_t ); // default max buffer size
+ if( max_msg_size > 0 ) {
+ if( max_msg_size <= ctx->max_plen ) { // user defined len can be smaller
+ ctx->max_plen = max_msg_size;
+ } else {
+ fprintf( stderr, "[WARN] rmr_init: attempt to set max payload len > than allowed maximum; capped at %d bytes\n", ctx->max_plen );
+ }
+ }
+
+ ctx->max_mlen = ctx->max_plen + sizeof( uta_mhdr_t );
+
+ uta_lookup_rtg( ctx ); // attempt to fill in rtg info; rtc will handle missing values/errors
+
+ ctx->nn_sock = nn_socket( AF_SP, NN_PULL ); // our 'listen' socket should allow multiple senders to connect
+ if( ctx->nn_sock < 0 ) {
+ fprintf( stderr, "[CRIT] rmr_init: unable to initialise nanomsg listen socket: %d\n", errno );
+ free_ctx( ctx );
+ return NULL;
+ }
+
+ if( (port = strchr( proto_port, ':' )) != NULL ) {
+ if( port == proto_port ) { // ":1234" supplied; leave proto to default and point port correctly
+ port++;
+ } else {
+ *(port++) = 0; // term proto string and point at port string
+ proto = proto_port; // user supplied proto so point at it rather than default
+ }
+ } else {
+ port = proto_port; // assume something like "1234" was passed
+ }
+
+ if( (gethostname( wbuf, sizeof( wbuf ) )) < 0 ) {
+ fprintf( stderr, "[CRIT] rmr_init: cannot determine localhost name: %s\n", strerror( errno ) );
+ return NULL;
+ }
+ if( (tok = strchr( wbuf, '.' )) != NULL ) {
+ *tok = 0; // we don't keep domain portion
+ }
+ ctx->my_name = (char *) malloc( sizeof( char ) * RMR_MAX_SID );
+ if( snprintf( ctx->my_name, RMR_MAX_SID, "%s:%s", wbuf, port ) >= RMR_MAX_SID ) { // our registered name is host:port
+ fprintf( stderr, "[CRIT] rmr_init: hostname + port must be less than %d characters; %s:%s is not\n", RMR_MAX_SID, wbuf, port );
+ return NULL;
+ }
+
+ if( (interface = getenv( ENV_BIND_IF )) == NULL ) {
+ interface = "0.0.0.0";
+ }
+ snprintf( bind_info, sizeof( bind_info ), "%s://%s:%s", proto, interface, port );
+ if( nn_bind( ctx->nn_sock, bind_info ) < 0) { // bind and automatically accept client sessions
+ fprintf( stderr, "[CRIT] rmr_init: unable to bind nanomsg listen socket for %s: %s\n", bind_info, strerror( errno ) );
+ nn_close( ctx->nn_sock );
+ free_ctx( ctx );
+ return NULL;
+ }
+
+ if( ! (flags & FL_NOTHREAD) ) { // skip if internal context that does not need rout table thread
+ if( pthread_create( &ctx->rtc_th, NULL, rtc, (void *) ctx ) ) { // kick the rt collector thread
+ fprintf( stderr, "[WARN] rmr_init: unable to start route table collector thread: %s", strerror( errno ) );
+ }
+ }
+
+ free( proto_port );
+ return (void *) ctx;
+}
+
+
+/*
+ Publicly facing initialisation function. Wrapper for the init() funcion above
+ as it needs to ensure internal flags are masked off before calling the
+ real workhorse.
+*/
+extern void* rmr_init( char* uproto_port, int max_msg_size, int flags ) {
+ return init( uproto_port, max_msg_size, flags & UFL_MASK );
+}
+
+/*
+ Return true if routing table is initialised etc. and app can send/receive.
+*/
+extern int rmr_ready( void* vctx ) {
+ uta_ctx_t *ctx;
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL ) {
+ return FALSE;
+ }
+
+ if( ctx->rtable != NULL ) {
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/*
+ Provides a non-fatal (compile) interface for the nng only function.
+ Not supported on top of nano, so this always returns -1.
+*/
+extern int rmr_get_rcvfd( void* vctx ) {
+ errno = ENOTSUP;
+ return -1;
+}
+
+/*
+ Compatability (mostly) with NNG.
+*/
+extern void rmr_close( void* vctx ) {
+ uta_ctx_t *ctx;
+
+ if( (ctx = (uta_ctx_t *) vctx) == NULL ) {
+ return;
+ }
+
+ nn_close( ctx->nn_sock );
+}
Code Review / ric-plt / lib / rmr.git / blobdiff