EGTP receiver thread creation

[o-du/l2.git] / src / du_app / du_cfg.h

diff --git a/src/du_app/du_cfg.h b/src/du_app/du_cfg.h
index e427dc7..9244f42 100644 (file)
--- a/src/du_app/du_cfg.h
+++ b/src/du_app/du_cfg.h
@@ -32,6 +32,7 @@
 #define CU_EGTP_PORT  39002
 #define NR_PCI 1
 #define NR_CELL_ID 1
+#define NR_NUMEROLOGY 0
 #define DU_NAME "ORAN_OAM_DU"
 #define CELL_TYPE SMALL
 #define DUPLEX_MODE DUP_MODE_FDD
@@ -43,23 +44,24 @@
 #define PLMN_MNC1 8
 #define PLMN_MNC2 0
 #define PLMN_SIZE 3
-#define NR_DL_ARFCN 385627
-#define NR_UL_ARFCN 386687
+
+/* Spec 30.104 Table 5.4.2.3-1:Applicable NR-ARFCN per operating band in FR1 */
+#define NR_DL_ARFCN 428000
+#define NR_UL_ARFCN 390000
 #define SUL_ARFCN 100
-#define NR_FREQ_BAND 257
-#define NR_FREQ_BAND_IND 78
+#define NR_FREQ_BAND 1
+#define NR_FREQ_BAND_IND 1
 #define SUL_BAND 2
+
 #define TIME_CFG 0
 #define CARRIER_IDX 1
 #define NUM_TX_ANT 2
 #define NUM_RX_ANT 2
 #define FREQ_SHIFT_7P5KHZ FALSE
-#define SSB_PBCH_PWR -5
-#define BCH_PAYLOAD MAC_GEN_FULL_PBCH_PAYLD
-#define TOTAL_PRB_BW 106
+#define SSB_PBCH_PWR 0
+#define BCH_PAYLOAD PHY_GEN_TIMING_PBCH_BIT
 #define SUBCARRIER_SPACING 0
 #define NORMAL_CYCLIC_PREFIX 0
-#define SCS_CARRIER_BANDWIDTH 273         /* Subcarrier spacing- carrier bandwidth */
 #define OFFSET_TO_POINT_A 24                     /* PRB Offset to Point A */
 #define BETA_PSS BETA_PSS_0DB  
 #define SSB_PERIODICITY_5MS   5
@@ -73,7 +75,6 @@
 #define MULT_CELL_CARRIER FALSE
 #define FREQ_LOC_BW  1099              /* DL frequency location and bandwidth */
 #define UL_P_MAX  23
-#define BANDWIDTH 20
 #define DMRS_TYPE_A_POS 2
 #define NUM_SYMBOLS_PER_SLOT 14       /* Number of symbols within a slot */
 #define CORESET0_END_PRB   48
@@ -83,12 +84,12 @@
 #define PRACH_CONFIG_IDX   88
 #define PRACH_FREQ_START   0
 #define PRACH_SEQ_LEN SHORT_SEQUENCE
-#define PRACH_SUBCARRIER_SPACING 1
+#define PRACH_SUBCARRIER_SPACING 0
 #define PRACH_RESTRICTED_SET_CFG 0
 #define NUM_PRACH_FDM 1
-#define ROOT_SEQ_IDX 24
+#define ROOT_SEQ_IDX 0
 #define NUM_ROOT_SEQ 1
-#define ZERO_CORRELATION_ZONE_CFG 6
+#define ZERO_CORRELATION_ZONE_CFG 4
 #define NUM_UNUSED_ROOT_SEQ 0
 #define UNUSED_ROOT_SEQ 1
 #define SSB_PER_RACH 1
@@ -194,7 +195,7 @@
 /* Macro definitions for F1 procedures */
 #define CU_DU_NAME_LEN_MAX 30      /* Max length of CU/DU name string */
 #define MAX_F1_CONNECTIONS 65536    /* Max num of F1 connections */
-#define MAX_PLMN           6        /* Max num of broadcast PLMN ids */
+#define MAX_PLMN           1        /* Max num of broadcast PLMN ids */
 #define MAXNRARFCN         3279165  /* Maximum values of NRAFCN */
 #define MAXNRCELLBANDS     2       /* Maximum number of frequency bands */
 #define MAX_NUM_OF_SLICE_ITEMS 1024     /* Maximum number of signalled slice support items */
@@ -259,6 +260,14 @@
 #define LC_ID 1
 #endif
 
+/* MACRO definitions for modulcation order */
+#define MOD_ORDER_QPSK  2
+#define MOD_ORDER_QAM16 4
+#define MOD_ORDER_QAM64 6
+#define MOD_ORDER_QAM256 8
+#define PDSCH_MCS_INDEX 20  /* For 64QAM, valid mcs index: 17-28 in 38.214  - Table 5.1.3.1-1*/
+#define PUSCH_MCS_INDEX 10  /* For 16QAM, valid mcs index: 10-16 in 38.214  - Table 5.1.3.1-1*/
+
 typedef enum
 {
    GNBDU,
@@ -799,7 +808,7 @@ typedef struct f1UacAssistInfo
 }F1UacAssistInfo;
 
 /* F1 setup related structures */
-
+#if 0
 typedef struct f1SetupReq
 {
    uint32_t                transId;                       /* Uniquely identify transaction */
@@ -964,6 +973,7 @@ typedef struct f1NwkAccessRateRed
    uint32_t          transId;        /* Uniquely identifies transaction */
    F1UacAssistInfo   uacAssistInfo;  /* UAC Assistance Information */
 }F1NwkAccessRateRed;
+#endif
 
 typedef struct f1Ipaddr
 {