/* defines */
#define RTLIN_DUMP_DEBUG printf
-/* bndCfg.bufOwnshp for xxBndReq */
-
-#define SUOWN 0 /* service user (upper layer) owns buffers */
-#define SPOWN 1 /* service provider (lower layer) owns buffers */
-
-/* bndCfg.flcTyp for xxBndReq */
-
-#define FLCNOTALLOW 0 /* flow control not allowed */
-#define FLCALLOW 1 /* flow control allowed */
-
-/* bndCfg.wdw for xxBndReq */
-
-#define WDWNOTALLOW 0 /* window not allowed */
-
-/* state values (e.g., for an interface) */
-
-#define STATE_DISCONNECTED 0x00 /* disconnected state */
-#define STATE_CONNECTING 0x01 /* connecting state */
-#define STATE_CONNECTED 0x02 /* connected state */
-#define STATE_DISCONNECTING 0x03 /* disconnecting state */
/* Protocol Address Structure related defines ..*/
#define MAX_PROTADDR_LEN 16 /* Right now defined for IP, IPX
#define MF_SIZE_TKNSTR 132 /* token string size - regular */
#define MF_SIZE_TKNSTRE 255 /* token string size - extra large */
#define MF_SIZE_TKNBITS 7 /* token bits size */
-#define TP_SIZE_TKNSTR 8 /* token string size */
-
-/* gen_h_001.main_133 --- size for extension container, MA_LIMIT_EXTCONT */
-#define MA_MF_EXTCONT_SIZE 20
-/* defines for type of service class */
-
-#define FRMRLY 1 /* frame relay */
-#define MACINT 2 /* mac interface */
-
-/* defines for ISUP and B-ISUP */
-
-
-/* subsystem field */
-
-#define SSF_INTER 0 /* international subsystem field */
-#define SSF_NAT 2 /* national subsystem field */
-
-#define PRI_ZERO 0 /* priority 0 - lowest */
-#define PRI_ONE 1 /* priority 1 */
-#define PRI_TWO 2 /* priority 2 */
-
-/* direction of suspend */
-
-#define FROM_LWR 1 /* direction from lower */
-#define FROM_UPR 2 /* direction from upper */
-#define MOD15 0x0f /* modulo 15 mask */
#define NOTUSED 0 /* not used */
-#define DIR_OUT 1
-#define DIR_INC 2
-
-#define PRESALLOW 0
-#define PRESREST 1
-#define MFROK 0
-#define MFRFAILED 1
-#define MFREOM 2
-
/* defines for ATM */
#ifndef CMFILE_REORG_1
-/* special vcc's */
-
-#define ATMVPI_SIG 0 /* Q.93B signalling */
-#define ATMVCI_SIG 5 /* Q.93B signalling */
-
-#define ATMVPI_ILMI 0 /* ILMI address registration */
-#define ATMVCI_ILMI 16 /* ILMI address registration */
-
-/* loss priority */
-
-#define ATMLP_HIGH 0 /* high priority */
-#define ATMLP_LOW 1 /* low priority */
-
-/* congestion indication */
-
-#define ATMCI_NOCONG 0 /* not congested */
-#define ATMCI_CONG 1 /* congested */
-
-/* reception status */
-
-#define ATMRS_NOERROR 0 /* no error */
-#define ATMRS_ERROR 1 /* error */
-
-/* establishement */
-
-#define AM_E_DEMAND 0x00 /* demand */
-
-/* quality of service classes */
-
-#define ATMQOS_CLASS0 0 /* QoS class 0 -unspecified QoS class*/
-#define ATMQOS_CLASS1 1 /* QoS class 1 */
-#define ATMQOS_CLASS2 2 /* QoS class 2 */
-#define ATMQOS_CLASS3 3 /* QoS class 3 */
-#define ATMQOS_CLASS4 4 /* QoS class 4 */
-
-/* ATM traffic descriptor octet group identifiers */
-
-#define AM_ATD_FPCR_ID0 0x82 /* forward peak cell rate id, CLP = 0 */
-#define AM_ATD_BPCR_ID0 0x83 /* backward peak cell rate id, CLP = 0 */
-#define AM_ATD_FPCR_ID1 0x84 /* forward peak cell rate id, CLP = 0+1 */
-#define AM_ATD_BPCR_ID1 0x85 /* backward peak cell rate id, CLP = 0+1 */
-#define AM_ATD_FSCR_ID0 0x88 /* forward sust. cell rate id, CLP = 0 */
-#define AM_ATD_BSCR_ID0 0x89 /* backward sust. cell rate id, CLP = 0 */
-#define AM_ATD_FSCR_ID1 0x90 /* forward sust. cell rate id, CLP = 0+1 */
-#define AM_ATD_BSCR_ID1 0x91 /* backward sust. cell rate id, CLP = 0+1 */
-#define AM_ATD_FMBS_ID0 0xa0 /* forward mean burst size id, CLP = 0 */
-#define AM_ATD_BMBS_ID0 0xa1 /* backward mean burst size id, CLP = 0 */
-#define AM_ATD_FMBS_ID1 0xb0 /* forward mean burst size id, CLP = 0+1 */
-#define AM_ATD_BMBS_ID1 0xb1 /* backward mean burst size id, CLP = 0+1 */
-#define AM_ATD_BSTEFFRTIND 0xbe /* best effort indicator */
-#define AM_ATD_TFCMGMTOPTID 0xbf /* traffic management options id */
-
-/* number of stop bits */
-
-#define AM_NSB_UNUSED 0x00 /* none specified */
-#define AM_NSB_1 0x01 /* 1 stop bit */
-#define AM_NSB_15 0x02 /* 1.5 stop bits */
-#define AM_NSB_2 0x03 /* 2 stop bits */
-
-/* crankback blocked transit type */
-
-#define AM_CBTT_BLKSUCCEND 0x02 /* call or party has been blocked at the
- * succeeding end of this interface */
-#define AM_CBTT_BLKNODE 0x03 /* blocked node */
-#define AM_CBTT_BLKLINK 0x04 /* blocked link */
-#define AM_CBTT_BLKBYDSUCC 0xff /* call or party has been blocked at or
- * beyond the succeeding node, AINI */
-
-/* Specific Crankback level for AINI */
-#define AM_AINI_CBLVL 0xff /* Crankback level for AINI */
-
-/* crankback cause indicator */
-
-#define AM_CBCAUSE_IND 0x85 /* crankback cause indicator */
-
-/* Cranckback and general cause values */
-
-#define AM_CV_INVCAUSEVAL 0 /* invalid cause value - proprietary */
-#define AM_CV_UNALLOCNMB 1 /* unallocated (unassigned) number */
-#define AM_CV_NOROUTTRANSNET 2 /* no route to transit network */
-#define AM_CV_NOROUTDST 3 /* no route to destination */
-#define AM_CV_VCCUNACPT 10 /* UNI 3.0: VPCI/VCI unacceptable */
-#define AM_CV_NORMCALLCLR 16 /* UNI 3.1: normal call clearing */
-#define AM_CV_USRBUSY 17 /* user busy */
-#define AM_CV_NOUSRRSP 18 /* no user response */
-#define AM_CV_NOANSUSR 19 /* no answer from user */
-#define AM_CV_CALLREJ 21 /* call rejected */
-#define AM_CV_NMBCHNG 22 /* number changed */
-#define AM_CV_CALLREJCLIR 23 /* user rejects all calls with CLIR */
-#define AM_CV_DSTOUTORD 27 /* destination out of order */
-#define AM_CV_INVNMBFORM 28 /* invalid number format */
-#define AM_CV_RSPSTATENQ 30 /* response to STATUS ENQUIRY */
-#define AM_CV_NORMUNSPEC 31 /* normal unspecified */
-#define AM_CV_PNDADDPTYREQ 32 /* PNNI: too many pending add party requests */
-#define AM_CV_CHNGINPGL 34 /* PNNI: Call cleared due to change in PGL */
-#define AM_CV_REQVCCUNAVAIL 35 /* requested VPCI/VCI unavailable */
-#define AM_CV_VCCFAIL 36 /* UNI 3.1: VPCI/VCI assignment failure */
-#define AM_CV_RATEUNAVAIL1 37 /* UNI 3.1: user cell rate unavailable */
-#define AM_CV_NETOUTORD 38 /* network out of order */
-#define AM_CV_TMPFAIL 41 /* Temporary failure */
-#define AM_CV_ACCINFODISC 43 /* access info discarded */
-#define AM_CV_NOVCCAVAIL 45 /* no VPCI/VCI unavailable */
-#define AM_CV_RESAIL 47 /* resources unavailable, unspecified */
-#define AM_CV_QOSUNAVAIL 49 /* Quality of Service unavailable */
-#define AM_CV_RATEUNAVAIL 51 /* UNI 3.0: user cell rate unavailable */
-#define AM_CV_REQPVPCVCCUNAV 53 /* PNNI: Requested Called party soft PVPC/PVCC not available */
-#define AM_CV_BCAPNOTAUTH 57 /* bearer capability not authorized */
-#define AM_CV_BCAPUNAVAIL 58 /* bearer capability not available */
-#define AM_CV_SRVUNAVAIL 63 /* Service or option unavailable */
-#define AM_CV_BCAPNOTIMPL 65 /* bearer capability not implemented */
-#define AM_CV_COMBUNSUPP 73 /* unsupported comb. of traffic parameters */
-#define AM_CV_AALPARMUNSUPP1 78 /* UNI 3.1: AAL paramteres cannot be supported */
-#define AM_CV_INVCALLREF 81 /* invalid call reference */
-#define AM_CV_CHANNOTEXST 82 /* identified channel does not exist */
-#define AM_CV_DSTNOTCOMP 88 /* incompatible destination */
-#define AM_CV_INVENDPTREF 89 /* invalid endpoint reference */
-#define AM_CV_INVTRANSNET 91 /* invalid transit network selection */
-#define AM_CV_MANYADDPTYREQ 92 /* too many add party requests */
-#define AM_CV_AALPARMUNSUPP 93 /* UNI 3.0:AAL paramteres cannot be supported */
-#define AM_CV_INFOELMSSG 96 /* mandatory info element is missing */
-#define AM_CV_MSGTYPNOTIMPL 97 /* message type not implemented */
-#define AM_CV_INFOELNOTIMPL 99 /* info element not implemented */
-#define AM_CV_INVINFOEL 100 /* invalid info element */
-#define AM_CV_MSGNOTCOMP 101 /* msg type not compatible with call st */
-#define AM_CV_TMRRCVRY 102 /* recovery on timer expiry */
-#define AM_CV_INVMSGLEN 104 /* incorrect message length */
-#define AM_CV_PROTERR 111 /* protocol error, unspecified */
-#define AM_CV_OPTELMERR 127 /* opt info el content error (non-std) */
-#define AM_CV_NOROUTNEXTNODE 128 /* next node unreachable */
-#define AM_CV_DTLNOTMYNODE 160 /* DTL Transit not my node ID */
-
-/* AAL type */
-
-#define AM_AALTYP_0 0x00 /* AAL for voice */
-#define AM_AALTYP_1 0x01 /* AAL type 1 */
-#define AM_AALTYP_2 0x02 /* AAL type 2 */
-#define AM_AALTYP_34 0x03 /* AAL type 3/4 */
-#define AM_AALTYP_5 0x05 /* AAL type 5 */
-#define AM_AALTYP_USR 0x10 /* user defined AAL */
-
-/* AAL type 1 - identifiers */
-#define AM_AAL1_ID_STYPE 0x85 /* AAL Subtype ID */
-#define AM_AAL1_ID_CBR 0x86 /* CBR Rate ID */
-#define AM_AAL1_ID_MULT 0x87 /* Multiplier Identifier */
-#define AM_AAL1_ID_SCFRM 0x88 /* Source Clock Freq. Recovery Method Id */
-#define AM_AAL1_ID_ECM 0x89 /* Error correction Method Id */
-#define AM_AAL1_ID_SDTB 0x8A /* Structured Data Transfer Blocksize Id */
-#define AM_AAL1_ID_PFC 0x8B /* Partially filled cells Id */
-
-/* AAL type 1 subtypes */
-#define AM_AAL1_STYPE_NULL 0x00 /* Null/Empty */
-#define AM_AAL1_STYPE_VOICE 0x01 /* Voice-band based on 64 kbit/s */
-#define AM_AAL1_STYPE_SCKT 0x02 /* Synchronous circuit Emulation */
-#define AM_AAL1_STYPE_ACKT 0x03 /* Asynchronous circuit Emulation */
-#define AM_AAL1_STYPE_HQAUD 0x04 /* High Quality Audio */
-#define AM_AAL1_STYPE_VIDEO 0x05 /* Video */
-
-/* AAL type 1 CBR rates */
-#define AM_AAL1_CBR_64 0x01 /* 64 kbit/s */
-#define AM_AAL1_CBR_1544 0x04 /* 1544 kbit/s (DS1) */
-#define AM_AAL1_CBR_6312 0x05 /* 6312 kbit/s (DS2) */
-#define AM_AAL1_CBR_32064 0x06 /* 32064 kbit/s */
-#define AM_AAL1_CBR_44736 0x07 /* 44736 kbit/s (DS3) */
-#define AM_AAL1_CBR_97728 0x08 /* 97728 kbit/s */
-#define AM_AAL1_CBR_2048 0x10 /* 2048 kbit/s (E1) */
-#define AM_AAL1_CBR_8448 0x11 /* 8448 kbit/s (E2) */
-#define AM_AAL1_CBR_34368 0x12 /* 34368 kbit/s (E3) */
-#define AM_AAL1_CBR_139264 0x13 /* 139264 kbit/s */
-#define AM_AAL1_CBR_nx64 0x40 /* n x 64 kbit/s */
-#define AM_AAL1_CBR_nx8 0x41 /* n x 8 kbit/s */
-
-/* AAL type 1 Clock recovery types */
-#define AM_AAL1_SCFRM_NULL 0x00 /* Null */
-#define AM_AAL1_SCFRM_SRTS 0x01 /* Synchronous Residual Time Stamp */
-#define AM_AAL1_SCFRM_ACR 0x02 /* Adaptive clock Recovery */
-
-/* AAL type 1 Error Correction types */
-#define AM_AAL1_ECM_NULL 0x00 /* NULL */
-#define AM_AAL1_ECM_FEC 0x01 /* Interleaved FEC */
-#define AM_AAL1_ECM_DSST 0x02 /* For delay sensitive signal transport */
-
-/* AAL type 1 Structured Data Transfer */
-#define AM_AAL1_SDTB_NULL 0x00 /* NULL */
-#define AM_AAL1_SDTB_SDT 0x01 /* Structured Data Transfer */
-
-/* AAL type 5 & 3/4 - identifiers */
-#define AM_AAL5_ID_FMSDU 0x8c /* forward maximum CPCS SDU size id */
-#define AM_AAL5_ID_BMSDU 0x81 /* backward maximum CPCS SDU size id */
-#define AM_AAL5_ID_MIDRNG 0x82 /* Mid Range Id */
-#define AM_AAL5_ID_MODE 0x83 /* mode identifier */
-#define AM_AAL5_ID_SSCS 0x84 /* SSCS type identifier */
-
-/* AAL type 5 & 3/4 - mode of operation */
-
-#define AM_AAL5_MODE_MSG 0x01 /* message mode */
-#define AM_AAL5_MODE_STREAM 0x02 /* streaming mode */
-
-/* AAL type 5 - SSCS type */
-
-#define AM_AAL5_SSCS_NULL 0x00 /* null SSCS */
-#define AM_AAL5_SSCS_SSCOP_A 0x01 /* SSCOP assured mode SSCS */
-#define AM_AAL5_SSCS_SSCOP_N 0x02 /* SSCOP non-assured mode SSCS */
-#define AM_AAL5_SSCS_FR 0x04 /* frame relay SSCS */
-
-/* bearer class */
-
-#define AM_BCOB_A 0x01 /* bearer class A */
-#define AM_BCOB_C 0x03 /* bearer class C */
-#define AM_BCOB_X 0x10 /* bearer class X */
-
-/* timing requirement */
-
-#define AM_TMGREQ_NOIND 0 /* no indication */
-#define AM_TMGREQ_ETOEREQ 1 /* end-to-end timing required */
-#define AM_TMGREQ_ETOENOTREQ 2 /* end-to-end timing not required */
-
-/* traffic type */
-
-#define AM_TFCTYP_NOIND 0 /* no indication */
-#define AM_TFCTYP_CBR 1 /* constant bit rate */
-#define AM_TFCTYP_VBR 2 /* variable bit rate */
-
-/* user plane connection configuration */
-
-#define AM_CONCFG_PTPT 0 /* point to point */
-#define AM_CONCFG_PTMPT 1 /* point to multipoint */
-
-/* susceptability to clipping */
-
-#define AM_SUSCLP_NO 0 /* not susceptible to clipping */
-#define AM_SUSCLP_YES 1 /* susceptible to clipping */
-
-/* layer 1 identity */
-
-#define AM_L1_IDENT 0x01 /* layer 1 identity */
-
-/* layer 2 identity */
-
-#define AM_L2_IDENT 0x02 /* layer 2 identity */
-
-/* layer 3 identity */
-
-#define AM_L3_IDENT 0x03 /* layer 3 identity */
-
-/* user information layer 1 */
-
-#define AM_UIL1_CCITTV110 0x01 /* CCITT Standardized Rate Adaptation V.110/X.30. */
-#define AM_UIL1_G711ULAW 0x02 /* Reccomendation G.711 u-Law */
-#define AM_UIL1_G711ALAW 0x03 /* Recommendation G.711 A-Law */
-#define AM_UIL1_G721ADCPM 0x04 /* Recommendation G.721 32 kbit/s ADCPM and */
- /* Recommendation I.460 */
-#define AM_UIL1_G722G725 0x05 /* Recommendation G.722 and G.725 - 7kHz Audio */
-#define AM_UIL1_H261 0x06 /* Recommendation H.261 - 384 kbit/s Video */
-#define AM_UIL1_NONCCITT 0x07 /* Non-CCITT standardized Rate adaptation */
-#define AM_UIL1_CCITTV120 0x08 /* CCITT Standardized Rate Adaptation V.120 */
-#define AM_UIL1_CCITTX31 0x09 /* CCITT Standardized Rate Adaptation X.31 HDLC */
-
-/* user information layer 2 protocol */
-
-#define AM_UIL2_BASIC 0x01 /* basic mode - ISO 1745 */
-#define AM_UIL2_Q921 0x02 /* CCITT Recommendation Q.921 */
-#define AM_UIL2_X25SLP 0x06 /* CCITT Recommendation X.25, single link */
-#define AM_UIL2_X25MLP 0x07 /* CCITT Recommendation X.25, multi link */
-#define AM_UIL2_T71 0x08 /* extended LAPB for half duplex, */
- /* CCITT Recommendation T.71 */
-#define AM_UIL2_HDLCARM 0x09 /* HDLC ARM - ISO 4335 */
-#define AM_UIL2_HDLCNRM 0x0a /* HDLC NRM - ISO 4335 */
-#define AM_UIL2_HDLCABM 0x0b /* HDLC ABM - ISO 4335 */
-#define AM_UIL2_LANLLC 0x0c /* LAN LLC - ISO 8802/2 */
-#define AM_UIL2_X75SLP 0x0d /* CCITT Recommendation X.75, single link */
-#define AM_UIL2_Q922 0x0e /* CCITT Recommendation Q.922 */
-#define AM_UIL2_USRSPEC 0x10 /* CCITT User specified */
-#define AM_UIL2_T90 0x11 /* CCITT T.90 */
-
-/* Layer 2/3 Operation Mode */
-#define AM_LOLYR_OPR_NORM 0x01 /* Normal mode of operation */
-#define AM_LOLYR_OPR_EXT 0x02 /* Extended mode of operation */
-
-/* user information layer 3 protocol */
-
-#define AM_UIL3_Q931 0x02 /* CCITT Recommendation Q.931 */
-#define AM_UIL3_T90 0x05 /* CCITT T.90 */
-#define AM_UIL3_X25PLP 0x06 /* CCITT Recommendation X.25, packet layer */
-#define AM_UIL3_ISO8208 0x07 /* ISO 8208 */
-#define AM_UIL3_ISO8348 0x08 /* ISO 8348 */
-#define AM_UIL3_ISO8473 0x09 /* ISO 8473 */
-#define AM_UIL3_T70 0x0a /* CCITT Recommendation T.70 */
-#define AM_UIL3_ISO9577 0x0b /* ISO/IEC TR 9577 */
-#define AM_UIL3_USRSPEC 0x10 /* CCITT User specified */
-
-/* presentation method of protocol profile */
-
-#define AM_PM_VAL1 0x01 /* value 1 */
-
-/* information transfer mode */
-
-#define AM_TM_CIRCUIT 0x00 /* circuit mode */
-#define AM_TM_PACKET 0x02 /* packet mode */
-
-/* information transfer capability */
-
-#define AM_ITC_SPEECH 0x00 /* speech */
-#define AM_ITC_UNRDIG 0x08 /* unrestricted digital information */
-#define AM_ITC_RESDIG 0x09 /* restricted digital information */
-#define AM_ITC_A31KHZ 0x10 /* 3.1kHz audio */
-#define AM_ITC_A7KHZ 0x11 /* 7 kHz audio */
-#define AM_ITC_A15KHZ 0x12 /* 15 kHz audio */
-#define AM_ITC_VIDEO 0x18 /* video */
-
-/* information transfer rate */
-
-#define AM_ITR_PKT 0x00 /* packet mode */
-#define AM_ITR_64KBIT 0x10 /* circuit mode - 64 kbits */
-#define AM_ITR_2X64KBIT 0x11 /* circuit mode - 2 X 64 kbits */
-#define AM_ITR_384KBIT 0x13 /* circuit mode - 384 kbits */
-#define AM_ITR_1472KBIT 0x14 /* circuit mode - 1472 kbits */
-#define AM_ITR_1536KBIT 0x15 /* circuit mode - 1536 kbits */
-#define AM_ITR_1920KBIT 0x17 /* circuit mode - 1920 kbits */
-#define AM_ITR_MULIRATE 0x18 /* circuit mode - multi rate */
-
-/* symmetry */
-
-#define AM_S_BISYM 0x00 /* bidirectional symmetry */
-
-/* structure */
-
-#define AM_S_DEF 0x00 /* default */
-#define AM_S_8KHZINTEG 0x01 /* 8 khz integrity */
-#define AM_S_SDUINTEG 0x04 /* service data unit integrity */
-#define AM_S_UNSTRUCT 0x07 /* unstructured */
-
-/* intermediate rate */
-
-#define AM_IR_NONE 0x00 /* none specified */
-#define AM_IR_8KBIT 0x01 /* 8 kbits */
-#define AM_IR_16KBIT 0x02 /* 16 kbits */
-#define AM_IR_32KBIT 0x03 /* 32 kbits */
-
-/* negotiation */
-
-#define AM_N_IBNOTPOSS 0x00 /* inband not possible */
-#define AM_N_IBPOSS 0x01 /* inband possible */
-
- /* negotiation indicator */
-
-#define AM_N_OBNOTPOSS 0x00 /* outband not possible */
-#define AM_N_OBPOSS 0x01 /* outband possible */
-
-/* synchronous/asynchronous */
-
-#define AM_SA_SYNC 0x00 /* synchronous */
-#define AM_SA_ASYNC 0x01 /* asynchronous */
-
-/* assignor/assignee */
-
-#define AM_AA_ORGASGNEE 0x00 /* originator is assignee */
-#define AM_AA_ORGASGNOR 0x01 /* originator is assignor */
-
-/* duplex mode */
-
-#define AM_DUPMODE_HALF 0x00 /* half duplex */
-#define AM_DUPMODE_FULL 0x01 /* full duplex */
-
-/* mode of operation */
-
-#define AM_MOO_BITTRANS 0x00 /* bit transparent */
-#define AM_MOO_PROTSEN 0x01 /* protocol sensitive */
-
-/* multiple frame establishment */
-
-#define AM_MFE_NOTSUP 0x00 /* not supported */
-#define AM_MFE_SUP 0x01 /* supported */
-
-/* logical link identifier */
-
-#define AM_LLI_DEF 0x00 /* default */
-#define AM_LLI_FULLNEG 0x01 /* full protocol negotiation */
-
-/* inband/outband negotiation */
-
-#define AM_ION_USRINFO 0x00 /* negotiation with user info messages */
-#define AM_ION_LL0 0x01 /* negotiation in band using logical link 0 */
-
-/* narrow band coding standards */
-
-#define AM_CSTD_CCITT 0x00 /* CCITT standards */
-#define AM_CSTD_INT 0x01 /* Other International Standards */
-#define AM_CSTD_NAT 0x02 /* National Standard */
-#define AM_CSTD_NET 0x03 /* Network Standard */
-
-/* coding standard */
-
-#define AM_CODESTD_CCITT 0 /* ITU-TS (CCITT) standardized */
-#define AM_CODESTD_NET 3 /* ATM Forum specific */
-
-/* location */
-
-#define AM_LOCN_USER 0x00 /* user */
-#define AM_LOCN_PRVNETLOC 0x01 /* private network serving local user */
-#define AM_LOCN_PUBNETLOC 0x02 /* public network serving local user */
-#define AM_LOCN_TRNSNET 0x03 /* transit network */
-#define AM_LOCN_PUBNETRMT 0x04 /* public network serving remote user */
-#define AM_LOCN_PRVNETRMT 0x05 /* private network serving remote user */
-#define AM_LOCN_INTNET 0x07 /* international network */
-#define AM_LOCN_NETINTWRK 0x0a /* network beyond interworking point */
-
-/* extended high layer characteristics */
-
-#define AM_XHLCI_TEL 0x01 /* Telephony - Recommendation G.711 */
-#define AM_XHLCI_FAXG4 0x04 /* Facsimile Group 4 - Recommendation T.62 */
-#define AM_XHLCI_DAPFAXG4 0x21 /* Doc App Profile for Facsimile Group 4 */
- /* Recommendation T.503 */
-#define AM_XHLCI_DAPMIXED 0x24 /* Doc App Profile for Facsimile Group 4 */
- /* Recommendation T.501 */
-#define AM_XHLCI_DAPPROC 0x28 /* Doc App Profile for Facsimile Group 4 */
- /* Recommendation T.502 */
-#define AM_XHLCI_TELETEX 0x31 /* Teletex - Recommendation T.62/T.70 */
-#define AM_XHLCI_DAPVIDEO 0x32 /* Doc App Profile for Facsimile Group 4 */
- /* Recommendation T.503 */
-#define AM_XHLCI_TELEX 0x35 /* Telex */
-#define AM_XHLCI_MHS 0x38 /* Message Handling System */
- /* Recommendation X.400 */
-#define AM_XHLCI_OSIAPP 0x41 /* OSI Application - Recommendation X.200 */
-#define AM_XHLCI_MAINT 0x5e /* Maintenance */
-#define AM_XHLCI_MNGMT 0x5f /* Management */
-#define AM_XHLCI_VIDTEL 0x60 /* Videotelephony (F.xyz and AV.242) */
-#define AM_XHLCI_RESERVE 0xff /* Reserved */
-
-
-/* ATM Traffic Descriptor tagging */
-
-#define AM_ATD_TAGNOTREQ 0 /* tagging not requested */
-#define AM_ATD_TAGREQ 1 /* tagging requested */
-
-/* ATM Traffic Descriptor Frame discard */
-
-#define AM_ATD_NOFRMDISC 0 /* frame discard not allowed */
-#define AM_ATD_FRMDISC 1 /* frame discard allowed */
-
-/* ATM Traffic Descriptor ABR specific token identifier */
-
-#define AM_ATD_ABR_FMCR_ID 0x92 /* Forward ABR minimum cell rate identifier */
-#define AM_ATD_ABR_BMCR_ID 0x93 /* Forward ABR minimum cell rate identifier */
-
-/* crankback level indicator */
-
-#define AM_CBLEVEL_IND 0x81 /* crankback level indicator */
-
-/* succeeding end block indicator */
-
-#define AM_ENDBLK_IND 0x82 /* succeeding end block indicator */
-
-/* blocked node indicator */
-
-#define AM_BLKNODE_IND 0x83 /* blocked node indicator */
-
-/* blocked link indicator */
-
-#define AM_BLKLINK_IND 0x84 /* blocked link indicator */
-
-/* connection level id */
-
-#define AM_CONLEVEL_ID 0x81 /* connection level id */
-
-/* connection level */
-
-#define AM_CONLEVEL_VCC 0x01 /* virtual channel connection */
-#define AM_CONLEVEL_VPC 0x02 /* virtual path connection */
-
-/* VPI/VCI selection type */
-
-#define AM_VPCSEL_ANY 0x00 /* any VPI/VCI */
-#define AM_VPCSEL_REQ 0x02 /* required VPI/VCI */
-#define AM_VPCSEL_ASSGN 0x04 /* assigned VPI/VCI */
-
-/* VPI id */
-
-#define AM_VPI_ID 0x81 /* VPI id */
-
-/* VCI id */
-
-#define AM_VCI_ID 0x82 /* VCI id */
-
-/* shaping indicator */
-
-#define AM_SHAPIND_NOREQ 0x00 /* no user requirement */
-#define AM_SHAPIND_NOAGG 0x01 /* no aggregation of user and OAM cells */
-
-/* payload types */
-
-#define ATMPT_USR 0 /* user cells */
-#define ATMPT_RM 1 /* RM cells */
-#define ATMPT_OAM 2 /* OAM cells */
-
-/* values for lnkNmb parameter */
-
-#define AMT_CON_LNK_UNUSED 0xffff /* link number field not significant */
-
-\f
-/* defines for LAN emulation */
-
/* MAC address length */
#define MACADDRLEN 6 /* 48 bit MAC address length */
-/* LANE and MAC header length */
-
-#define LANE_HDR_LEN 2 /* 2 octet LANE header length */
-#define LANE_MACHDR_LEN 14 /* 802.3 (DA/SA/Len), 802.5 (AC/FC/DA/SA) */
-
-/* Additional broadband repeat indicators */
-
-#define AM_REPIND_Q2763_1 0x00 /* reserved for use by Rec. Q.2763 */
-#define AM_REPIND_Q2763_2i 0x01 /* reserved for use by Rec. Q.2763 */
-
-/* values for AC/FC fields - to be ignored */
-
-#define LANE_HDR_8025_AC 0x00 /* no significance */
-#define LANE_HDR_8025_FC 0x40 /* LLC frame, priority 0 */
-
-/* value for pad octets */
-
-#define LANE_PAD 0x00 /* pad octets */
-
-/* source routed frame types */
-
-#define LANE_FRAMETYPE_NSR 0x00 /* not source routed */
-#define LANE_FRAMETYPE_SRF 0x01 /* specifically routed frame */
-#define LANE_FRAMETYPE_ARE 0x02 /* all routes explorer frame */
-#define LANE_FRAMETYPE_STE 0x03 /* spanning tree explorer frame */
-#define LANE_FRAMETYPE_ERR 0x04 /* illegal frame type */
-
-/* next hop types for SRF frames */
-
-#define LANE_NEXTHOP_NONE 0x00 /* no hop */
-#define LANE_NEXTHOP_LAST 0x01 /* last hop */
-#define LANE_NEXTHOP_MORE 0x02 /* more hops */
-
/* maximum sizes for typedef arrays */
#define MAX_LANNAME 32 /* size of LAN name string */
#define MAX_TLV_LEN 4 /* max length of value in TLV entry */
#define MAX_TLV_TBL 16 /* size of TLV table */
-/* marker (special LEC id) */
-
-#define LANE_MARKER_CTRL 0xff00 /* control frame marker */
-
-/* LAN emulation protocol */
-
-#define LANE_PROTOCOL 0x01 /* LAN Emulation protocol */
-
-/* LAN emulation protocol version */
-
-#define LANE_VERSION 0x01 /* LAN Emulation protocol version */
-
-/* op code type */
-
-#define LANE_OPCODE_TYPE_REQ 0x00 /* request frame */
-#define LANE_OPCODE_TYPE_RSP 0x01 /* response frame */
-
-/* op code name */
-
-#define LANE_OPCODE_CFGREQ 0x0001 /* configuration request frame */
-#define LANE_OPCODE_CFGRSP 0x0101 /* configuration response frame */
-#define LANE_OPCODE_JOINREQ 0x0002 /* join request frame */
-#define LANE_OPCODE_JOINRSP 0x0102 /* join response frame */
-#define LANE_OPCODE_READYQUERY 0x0003 /* ready query frame */
-#define LANE_OPCODE_READYIND 0x0103 /* ready indication frame */
-#define LANE_OPCODE_REGREQ 0x0004 /* register request frame */
-#define LANE_OPCODE_REGRSP 0x0104 /* register response frame */
-#define LANE_OPCODE_UNREGREQ 0x0005 /* unregister request frame */
-#define LANE_OPCODE_UNREGRSP 0x0105 /* unregister response frame */
-#define LANE_OPCODE_ARPREQ 0x0006 /* configuration request frame */
-#define LANE_OPCODE_ARPRSP 0x0106 /* configuration response frame */
-#define LANE_OPCODE_FLUSHREQ 0x0007 /* flush request frame */
-#define LANE_OPCODE_FLUSHRSP 0x0107 /* flush response frame */
-#define LANE_OPCODE_NARPREQ 0x0008 /* negative ARP request frame */
-#define LANE_OPCODE_TOPCHREQ 0x0009 /* topology change request frame */
-
-/* status */
-
-#define LANE_STA_SUCCESS 0 /* success */
-#define LANE_STA_UNSUPPVER 1 /* version not supported */
-#define LANE_STA_INVPARAM 2 /* invalid request parameters */
-#define LANE_STA_DUPLANDST 4 /* duplicate LAN destination */
-#define LANE_STA_DUPATMADDR 5 /* duplicate ATM address */
-#define LANE_STA_RESAIL 6 /* insufficient resources to grant request */
-#define LANE_STA_NOACCESS 7 /* access denied */
-#define LANE_STA_INVLECID 8 /* invalid requestor-LECID */
-#define LANE_STA_INVLANDST 9 /* invalid LAN destination */
-#define LANE_STA_INVATMADDR 10 /* invalid ATM address */
-#define LANE_STA_NOCFG 20 /* no configuration */
-#define LANE_STA_LECSERR 21 /* LECS error */
-#define LANE_STA_INFOUNAVAIL 22 /* insufficient information */
-
-/* non-standard status values, for internal use */
-
-#define LANE_STA_INVCTRL 0x0f00 /* invalid control frame - unspecified */
-
-/* flag values */
-
-#define LANE_FLAG_RMTADDR 0x0001 /* remote address (unreg LAN dst) */
-#define LANE_FLAG_PROXY 0x0080 /* LEC acts as proxy */
-#define LANE_FLAG_TOPCH 0x0100 /* topology change */
-
-/* tag values for LAN destination type */
-
-#define LANE_TAG_NOTPRSNT 0x0000 /* not present */
-#define LANE_TAG_MACADDR 0x0001 /* MAC address */
-#define LANE_TAG_RD 0x0002 /* route designator */
-
-/* LAN type */
-
-#define LANE_LANTYPE_UNSPECIFIED 0x00 /* unspecified */
-#define LANE_LANTYPE_8023 0x01 /* IEEE 802.3/Ethernet */
-#define LANE_LANTYPE_8025 0x02 /* IEEE 802.5/Token Ring */
-
-/* min frame size - values */
-
-#define LANE_MIN_DATA_8023 62 /* minimum AAL SDU size for IEEE 802.3 data */
-#define LANE_MIN_DATA_8025 16 /* minimum AAL SDU size for IEEE 802.5 data */
-#define LANE_MIN_CTRL 108 /* minimum AAL SDU size for control frame */
-
-/* max frame size - index */
-
-#define LANE_MTU_IDX_UNSPECIFIED 0x00 /* unspecified */
-#define LANE_MTU_IDX_ENET 0x01 /* 1516 octets IEEE 802.3 */
-#define LANE_MTU_IDX_TR_4 0x02 /* 4544 octets IEEE 802.5 4Mbps */
-#define LANE_MTU_IDX_RFC1626 0x03 /* 9234 octets RFC 1626 */
-#define LANE_MTU_IDX_TR_16 0x04 /* 18190 octets IEEE 802.5 16Mbps */
-
-/* max frame size - values */
-
-#define LANE_MTU_VAL_UNSPECIFIED 0 /* unspecified */
-#define LANE_MTU_VAL_ENET 1516 /* 1516 octets IEEE 802.3 */
-#define LANE_MTU_VAL_TR_4 4544 /* 4544 octets IEEE 802.5 4Mbps */
-#define LANE_MTU_VAL_RFC1626 9234 /* 9234 octets RFC 1626 */
-#define LANE_MTU_VAL_TR_16 18190 /* 18190 octets IEEE 802.5 16Mbps */
-
-/* VCC nature */
-
-#define VCC_NATURE_PVC 0 /* permanent virtual circuit */
-#define VCC_NATURE_SVC 1 /* switched virtual circuit */
-#define VCC_NATURE_PVC_SVC 2 /* mixed PVC/SVC */
-
-/* VCC type (values from LEC MIB) */
-
-#define LANE_VCC_TYPE_CTRL_DIR 0 /* control direct VCC */
-#define LANE_VCC_TYPE_CTRL_DIST 1 /* control distribute VCC */
-#define LANE_VCC_TYPE_MCAST_SND_8023 2 /* multicast send VCC for 802.3 */
-#define LANE_VCC_TYPE_MCAST_FWD_8023 3 /* multicast forward VCC for 802.3 */
-#define LANE_VCC_TYPE_MCAST_SND_8025 4 /* multicast send VCC for 802.5 */
-#define LANE_VCC_TYPE_MCAST_FWD_8025 5 /* multicast forward VCC for 802.5 */
-#define LANE_VCC_TYPE_DATA_DIR_8023 6 /* data direct VCC for 802.3 */
-#define LANE_VCC_TYPE_DATA_DIR_8025 7 /* data direct VCC for 802.5 */
-#define LANE_VCC_TYPE_UNKNOWN 8 /* unclassified VCC */
-#define LANE_VCC_TYPE_CFG_DIR 9 /* cfg direct VCC */
-
-/* LAN destination proxy class */
-
-#define LANE_CLASS_LOCAL 0 /* local LAN destination */
-#define LANE_CLASS_PROXY 1 /* proxy LAN destination */
-
-/* LAN destination mode (type) */
-
-#define LANE_LDMODE_UCAST_MACADDR 0 /* unicast MAC address */
-#define LANE_LDMODE_MCAST_MACADDR 1 /* multicast MAC address */
-#define LANE_LDMODE_MCAST_ALLGRP 2 /* all group addresses */
-#define LANE_LDMODE_MACADDR 3 /* MAC address */
-#define LANE_LDMODE_RD 4 /* route descriptor */
-#define LANE_LDMODE_UCAST_ALLUNI 5 /* all unicast addresses */
-
-/* configuration mode */
-
-#define LANE_CFGMODE_AUTO 0 /* auto cfg (use LECS ATM addr) */
-#define LANE_CFGMODE_MANUAL 1 /* manual cfg (use LES ATM addr) */
-
-/* ATM Forum OUI - 3 octets */
-
-#define OUI_ATMF 0x00a03e /* ATM Forum OUI */
-
-/* LAN Emulation Protocol Ids - 2 octets */
-
-#define LANE_PID_CTRL 0x0001 /* control VCCs */
-#define LANE_PID_DATA_DIR_8023 0x0002 /* data direct VCCs for IEEE 802.3 */
-#define LANE_PID_DATA_DIR_8025 0x0003 /* data direct VCCs for IEEE 802.5 */
-#define LANE_PID_MCAST_8023 0x0004 /* multicast VCCs for IEEE 802.3 */
-#define LANE_PID_MCAST_8025 0x0005 /* multicast VCCs for IEEE 802.5 */
-
-/* LAN Emulation standard TLV types - 4 octets */
-
-#define LANE_TLV_C7 0x00a03e01 /* control timer */
-#define LANE_TLV_C10 0x00a03e02 /* max unknown frame count */
-#define LANE_TLV_C11 0x00a03e03 /* max unknown frame timer */
-#define LANE_TLV_C12 0x00a03e04 /* VCC aging timer */
-#define LANE_TLV_C13 0x00a03e05 /* max retry count */
-#define LANE_TLV_C17 0x00a03e06 /* ARP long (cache) timer */
-#define LANE_TLV_C18 0x00a03e07 /* ARP short (fwd delay) timer */
-#define LANE_TLV_C20 0x00a03e08 /* ARP Request timer */
-#define LANE_TLV_C21 0x00a03e09 /* Flush Request timer */
-#define LANE_TLV_C22 0x00a03e0a /* path switching delay */
-#define LANE_TLV_C23 0x00a03e0b /* local segment id */
-#define LANE_TLV_C24 0x00a03e0c /* mcast snd VCC type */
-#define LANE_TLV_C25 0x00a03e0d /* mcast snd VCC SCR */
-#define LANE_TLV_C26 0x00a03e0e /* mcast snd VCC PCR */
-#define LANE_TLV_C28 0x00a03e0f /* Ready Ind timer */
#endif /* CMFILE_REORG_1 */
-\f
-
-/* structure */
-
-#define S_DEF 0x00 /* default */
-#define S_8KHZINTEG 0x01 /* 8 khz integrity */
-#define S_SDUINTEG 0x04 /* service data unit integrity */
-#define S_UNSTRUCT 0x07 /* unstructured */
-
-/* define for TCAP string size */
-/* gen_h_001.main_128 - redefined value of MAX_ST_STRING to 256 */
-#define MAX_ST_STRING 256 /* longest string */
-
-\f
/* defines for SPstTsk */
#define SEL_LC_NEW 0 /* loosely coupled interface - new */
#define SEL_LC_OLD 1 /* loosely coupled interface - old */
-/* defines for system service entity processor, region and pool id's */
-
-#define OWNPROCID 0 /* own processor id */
-#define SP_POOL 0x00 /* service provider pool id */
-#define SU_POOL 0x00 /* service user pool id */
-
-/* defines for stack manager region and pool id's */
-
-#define SMREGION 1 /* stack manager region id */
-#define SMPOOL 0 /* stack manager pool id */
/* defines */
#define TCNTRL 2 /* control */
#define TSTS 3 /* statistics */
#define TSSTA 4 /* solicited status */
+#if 0
#define TUSTA 5 /* unsolicited status */
#define TTRC 6 /* trace */
#define TACNT 7 /* billing */
#define TMIB 15 /* mib req */
/* gen_h_001.main_124 RRC 2.0 Release*/
#define TAUDT 16 /* Audit req */
-
+#endif
+
/* Mngmt.hdr.elmId.elmnt */
#define STGEN 1 /* general */
+#define STSID 8 /* system id */
+#if 0
#define STTSAP 2 /* transport SAP */
#define STNSAP 3 /* network SAP */
#define STLLSAP 4 /* logical link SAP */
#define STDLSAP 5 /* data link SAP */
#define STMSAP 6 /* MAC SAP */
#define STPSAP 7 /* physical SAP */
-#define STSID 8 /* system id */
#define STHG 9 /* hunt Group */
#define STROUT 10 /* route */
#define STDLC 11 /* data link connection */
#define STPNPG 63 /* PNNI PEER GROUP */
#define STLINK 64 /* ATM Physical Link */
#define STINFOGRP 65 /* information group */
-
#define STNISAP 66 /* FR-ATM network interworking sap */
#define STSISAP 67 /* FR-ATM service interworking sap */
#define STPROF 68 /* FR-ATM aal connection's profile */
#define STADDR 71 /* address */
#define STSRVC 72 /* service registry */
#define STCIPSAP 73 /* PLOA's CIPSAP */
-
/* define for Envelope Function EFadr mapping */
#define STEVEFADR 74 /* EV EFadr to SAP mapping */
/* used by PQ for TDM Configuration */
#define STTDM 78 /* TDM Configuration */
-
/* Used by LES */
#define STLECSMPOATLV 79 /* LECS MPOA TLV entry */
#define STGRDLSAP 87 /* data link sap group */
#define STALLSAP 88 /* all upper/lower SAPs */
#define STPEERSAP 89 /* configure peer sap */
-
/* Used by V5 */
#define STVINTERFACE 83 /* V5 Interface */
#define STVPORT 84 /* V5 port */
more PVC on the fly */
#define STCIPARP 87 /* PLOA Cfg. request to configure some
extra IP-ATM binding on the fly */
-
-
/* used by Q.93B for AalConParam of signaling channels */
#define STSIGCONPARAM 90 /* config Signaling connection parameters */
#define STDELSIGPARAM 91 /* Delete Signaling connection parameters */
#define STVPROC 92 /* Configure virtual node */
#define STPPROC 93 /* Configure physical node */
#define STASSOC 94 /* Configire association between vnodes */
- /* and layers */
/* used by TCAP over TCP/IP */
#define STSERVER 95 /* configure TCP/UDP server */
#define STSMS 101 /* PLOA LANE Selective M-cast Server */
#define STSMSGRP 102 /* PLOA SMS Multicast Group */
#define STSMSLEC 103 /* PLOA LEC Associated with SMS */
-
/* used by PLOA - PPPoA */
#define STMASAP 104 /* POOA MASAP - PPPoA upper SAP */
#define STNHSEXTNS 114 /* PLOA NHS */
#define STNHSEGRCACHE 115 /* PLOA NHS */
#define STNHSVENDATA 116 /* PLOA NHS */
-
/* used by H.323 Control */
#define STSSAP 117 /* H.323 Session SAP element */
#define ST323ENT 118 /* H323 entity element */
#define STSRVCTYPE 129 /* service type */
#define STSRVCCONNINFO 130 /* service connection info */
#define STAALPROFILE 131 /* AAL[x] profiles; x = 1, 2, 34, 5 */
-
/* used by MPLS-LDP (+CR) */
#define STPEER 132 /* LDP Peer */
#define STFEC 133 /* MPLS FEC */
#define STGRSNTSAP 144 /* SNT Group */
#define STPATH 145 /* AAL2 path */
#define STDPC 146 /* DPC - MTP3B */
-
/* used by Annex G */
#define STBE 147
#define STGRBESAP 148
#define STDELNW 163 /* delete network */
#define STDELTSAP 164 /* delete transport sap */
#define STDELNSAP 165 /* delete network sap */
-
/* new elements for 3GPP-RLC */
#define STCRSAP 166 /* RLC Control SAP */
#define STRLSAP 167 /* RLC Data SAP */
/* new elements for LAPDm */
#define STLSAP 178
#define STRRSAP 179
+
/*gen_h_001.main_127 - incremented values*/
/* gen_h_001.main_123 - Add new elements for 3GPP-PDCP */
#define STCTSAP 180 /* PDCP Control SAP */
#define STPDCPENT 182 /* PDCP Entity */
/*-- gen_h_001.main_130 --*/
#define STINST 183 /* IuUP Instance */
-
+#endif
/* gen_h_001.main_134 - lte rlc 2.1 */
-/* elements for LTE-RLC SAPs */
+/* elements for NR RLC SAPs */
#define STCKWSAP 184 /*!< RLC Control SAP element. */
#define STKWUSAP 185 /*!< RLC Data SAP element. */
#define STRGUSAP 186 /*!< RLC MAC SAP element. */
/* elements for LTE-PDCP SAPs */
-#define STCPJSAP 187 /*!< PDCP control SAP element. */
-#define STPJUSAP 188 /*!< PDCP control SAP element. */
#ifdef RM_INTF
#define STRMUSAP 189 /*!< LTE RRM control SAP element. */
#define STRGMSAP 190
#endif
-#define STNLUSAP 191 /*!< eNB APP and SON module SAP */
-
/* Mngmt.t.cntrl.action, Mngmt.hdr.elmId.elmntInst1 */
#define AENA 1 /* enable */
#define ADISIMM 2 /* disable - immediately */
#define ADISGRC 3 /* disable - gracefully */
#define ARST 4 /* reset */
-#define ADGN 5 /* diagnose */
-#define AADD 6 /* add */
#define ADEL 7 /* delete */
-#define AINH 8 /* inhibit */
-#define AUNINH 9 /* uninhibit */
-#define ASPRST 10 /* signalling point restart */
-#define AACTLNKSET 11 /* activate link set */
-#define ADEACTLNKSET 12 /* deactivate link set */
-#define AVAL 13 /* validate circuit */
-#define AFLCON 14 /* flow control on */
-#define AFLCOFF 15 /* flow control off */
-#define ACLEAR 16 /* clear */
-#define ASTRTLL 17 /* start local loop */
-#define AENDLL 18 /* end local loop */
-#define ACTION_DROP 19 /* action - drop */
-#define ACTION_NO_DROP 20 /* action - no drop */
-#define ABND_ENA 21 /* bind and enable */
-#define ARSTVCC 22 /* restart a virtual channel connection */
-#define ARSTVPC 23 /* restart a virtual path connection */
-
-/* actions for LsaCntrlReq (q.2140) */
-
-#define AFORCE_PRV 24 /* Force Proving */
-#define AFORCE_EM 25 /* Force Emergency */
-#define ACLR_FORCE_MD 26 /* Clear Force Mode */
-#define ACTION_LPO 27 /* Local Processor Outage */
-#define ACTION_LPR 28 /* Local Processor Recovered */
-#define APRV_UNS 29 /* Proving Unsuccessful Response */
-
#define ABND 30 /* bind */
#define AUBND 31 /* disable + unbind */
#define AUBND_DIS AUBND /* unbound disable */
-
/* actions for mtp3 */
-
+#if 0
#define ADELROUT 32 /* delete rout control block */
#define ADELLNKSET 33 /* delete all linkset control blocks, link control blocks
for a given linkset id */
#define ADELCMBLNKSET 34 /* delete linkset control block for a given combined linkset id */
#define ADELLNK 35 /* delete link control block */
+#endif
#define ASHUTDOWN 36 /* shutdown the layer */
+#if 0
#define ATRAP 37 /* trap */
#define AGEN_STA 38 /* generate status indications -MSOC */
-
/* actions for fault tolerance */
#define AGO_ACT 38 /* go active */
#define AGO_SBY 39 /* go standby */
#define ADEACTLNKSET_L2 51 /* deactivate link set: all links should be deactivated
only at L2 level */
#define AGEN_MSG 52 /* message generation control action */
-
/* For PLOA */
#define ASNDTRIGG 53 /* Generate Flow detection trigger */
#define ASRVMSG_ON 59 /* Turn on service message capability */
#define ASRVMSG_OFF 60 /* Turn off service message capability */
#define ARESTART 61 /* Restart Interface/Channel */
-
/* For TCR 0004.01 */
#define AMODIFY 62 /* Modify trace length */
/* For SIP */
#define AADD_ASSOC_TPTSRV 70 /* Add transport server association */
#define ADEL_ASSOC_TPTSRV 71 /* Delete transport server association */
-
/* for SCCP congestion control (sccp3.2) */
#define ACONG 72 /* congestion cntrl - start sending SSC */
/* For OAM */
#define ASTRTPMLL 78 /* OAM Start PM Loopback of FMC's */
#define AENDPMLL 79 /* OAM End Performance Generation */
#define ARSTPM 80 /* OAM Reset counters of PM block */
-
#define AMODABORT 81 /* Abort Modification Request */
#define AADD_ASSOC_ENDP 82
#define ADEL_ASSOC_ENDP 83
#define ASTOP_LNK_AUDIT 95
#define ASTOP_LNKSET_AUDIT 96
#define ASTOP_RTE_AUDIT 97
-
/* gen_h_001.main_125 - Addition - SUA support*/
#ifdef LSPV2_8
#define AADD_ASP 86
#define ADEL_ASPSSN 88
#define ADEL_ASPCPC 89
#endif
-
/* Added for NBAP to support SCT(SCTP) as lower interface */
#define AEOPENR 100
#define AECLOSER 101
#define AHBEAT_DIS_ASSOC 105
#define AHBEAT_ENB_DSTADDR 106
#define AHBEAT_DIS_DSTADDR 107
-
+#endif
/* Mngmt.t.cntrl.subAction */
#define SAELMNT 1 /* specified element */
#define SAUSTA 3 /* unsolicited status generation */
#define SATRC 4 /* trace generation */
#define SADBG 5 /* debugging */
-#ifdef SS_DIAG
-/* gen_h_001.main_142:Added subaction SALOG */
-#define SALOG 6 /* logging */
-#endif
-
-/* grouping criteria's will be filled in subaction fields */
-
-#define SAGR_DSTPROCID 6 /* group on dstProcId */
-#define SAGR_ROUTE 7 /* group on routes */
-#define SAGR_PRIORITY 8 /* group on priority */
-#define SAENA_PEER_SAP 9 /* enable peer sap */
-#define SADIS_PEER_SAP 10 /* disable peer sap */
-#define SAAUD 11 /* Audit */
-/* For GCP 1.2 */
-#define SADNS 12 /* Enable /Disable DNS Access*/
-
-/* for SCCP traffic limitation mechanism and error report (sccp3.2) */
-#define SATRFLIM 13 /* traffic limitation mechanism */
-#define SAREPORT 14 /* sccp error perfroamce report */
-
-#define SAGR_GENERIC_MAX 20 /* max on subactions to be defined in gen.h */
-
-/* Subactions required for H.323 user layer (HU) */
-#define HU_RUNREQ 12 /* run a test case */
-#define HU_PROCEEDREQ 13 /* resume operation with a test case */
-
-/* Mngmt.t.mib.opCode */
-#define MIBOPCODEBASE 1000 /* Base for non standard opCode values */
-#define MIB_REQUEST_GET 0 /* GET request for reading mib variable*/
-#define MIB_REQUEST_GET_NEXT 1 /* GET-NEXT request to read
- lexicographically next mib variable*/
-#define MIB_REQUEST_SET 3 /* Assign mib variable a value */
-
-/* Mngmt.t.mib.status */
-#define MIBSTATUSBASE 1000 /* Base for non standard status values */
-#define MIB_SUCCESS 0 /* Mib request successfully completed */
-#define MIB_NOSUCHNAME 2 /* no such name */
-#define MIB_INVALID_IDX (MIBSTATUSBASE + 1) /* Index to the row-column
- * of mib table invalid */
-#define MIB_INVALID_OPCODE (MIBSTATUSBASE + 3) /* OpCode is not one of the
- * above defined*/
-#define MIB_END_ALL_TABLES (MIBSTATUSBASE + 4) /* End of the table reached
- * in get next */
-#define MIB_SUCCESS_NEXT_AVL_OBJ (MIBSTATUSBASE + 6) /* returning object from
- * a different table than
- * before */
-
-/* Mngmt.t.trc.evnt */
-
-#define TL1FRMRX 0 /* layer 1 - frame received */
-#define TL1FRMTX 1 /* layer 1 - frame transmitted */
-#define TL2FRMRX 2 /* layer 2 - frame received */
-#define TL2FRMTX 3 /* layer 2 - frame transmitted */
-#define TL2TMR 4 /* layer 2 - timer expired */
-#define TL3PKTRX 5 /* layer 3 - frame received */
-#define TL3PKTTX 6 /* layer 3 - frame transmitted */
-#define TL3TMR 7 /* layer 3 - timer expired */
-#define TL7FRMRX 8 /* layer 7 - frame received */
-#define TL7FRMTX 9 /* layer 7 - frame transmitted */
-#define TL7TMR 10 /* layer 7 - timer expired */
-#define TL5MSGTX 11 /* layer 5 - message transmitted */
-#define TL5MSGRX 12 /* layer 5 - message received */
-
/* defines for MxxStsReq */
#define ZEROSTS 0 /* zero statistics counters */
#define NOZEROSTS 1 /* dont zero statistics counters */
-
+#if 0
/* defines for MxxCfgReq */
#define THRSHA 0 /* 00% resources available */
/* to call packets */
#define LSAP 1 /* Link Level SAP Type */
#define XTSAP 2 /* Transport SAP Type */
+#endif
#ifdef IGNORE
#undef IGNORE
#define IGNORE 0 /* Ignore SAP Type */
#endif /* IGNORE */
-#define X25LINK 0 /* X25 Link */
-#define X75LINK 1 /* X75 Link */
-
-#define USER 0 /* acts as user */
-#define NETWORK 1 /* acts as network */
-#define SYM_USER 2 /* acts as symmetrical user */
-
-/* defines for MxxStaInd */
-
-#define ENTR_CONG 1 /* event - entering congst */
-#define EXIT_CONG 2 /* event - exiting congest */
-#define PROT_ST_UP 3 /* event - link up */
-#define PROT_ST_DN 4 /* event - link down */
-#define PROT_ERR 5 /* event - protocol error */
-#define INV_REM 6 /* event - invalid remove */
-#define LINK_ALIGNED 7 /* event - mtp 2 - link alignment */
-#define ALIGN_LOST 8 /* event - mtp 2 - alignment lost */
-#define ELEC_DOWN 9 /* event - scc - electrical interface down */
-#define ELEC_UP 10 /* event - scc - electrical interface up */
-#define REG_DOWN 11 /* event - mos - memory region down */
-#define REG_UP 12 /* event - mos - memory region up */
-#define INH_DEN 13 /* event - link inhibit denied */
-#define INH_ACK 14 /* event - link inhibited */
-#define UNINHED 15 /* event - link uninhibited */
-#define UNINH_DEN 16 /* event - link uninhibit denied */
-#define CONG_LVL_1 17 /* event - congestion level 1 */
-#define CONG_LVL_2 18 /* event - congestion level 2 */
-#define CIR_OUT_ORD 19 /* event - cirquit out of order */
-#define CIRMGT_NORESP 20 /* event - no response to cirquit management message */
-#define CIR_INVAL 21 /* event - invalid circuit */
-#define CIR_VAL_FAIL 22 /* event - circuit validation failure */
-#define CIR_VAL_SUCC 23 /* event - circuit validation success */
-#define CIC_INVAL 24 /* event - invalid cic code */
-#define CONT_FAIL 25 /* event - continuity failed */
-#define CIR_UNEQUIP 49 /* event - circuit unequipped */
-#define RMT_BLKD 50 /* event - link remotely blocked */
-#define RMT_UNBLKD 51 /* event - link remotely unblocked */
-#define CIR_IN_SERV 52 /* event - circuit back in service */
-#define TERM_INIT_FAIL 53 /* event - terminal initialization failed */
-#define ERROR_LOG 54 /* event - software error logged */
-
-#define INV_EVENT (ERROR_LOG + 1) /* event - invalid */
-
-/* ss7 switch defines */
-
-/* #define SW_TST 0 switch - test */
-#define SW_CCITT 1 /* switch - ccitt */
-#define SW_ITU 1 /* switch - itu-t */
-#define SW_CCITT88 1 /* switch - ccitt 88 */
-#define SW_ANSI 2 /* switch - ansi */
-#define SW_ANSI88 2 /* switch - ansi 88 */
-#define SW_ANSI92 3 /* switch - ansi 92*/
-#define SW_CCITT92 4 /* switch - ccitt 92 */
-#define SW_SINGTEL 4 /* switch - singapore telecom */
-#define SW_Q767 5 /* switch - int'l isup q.767 */
-#define SW_CHINA 6 /* switch - china */
-/* for sccp3.2 */
-#define SW_JAPAN 7 /* switch - japan */
-\f
#ifndef CMFILE_REORG_1
/* defines for Q.93B */
/* parameter values that are at management and at upper interface */
-
-/* switch defines */
-
-#define SW_ATMF_UNI30 0 /* switch - ATM Forum UNI v3.0 */
-#define SW_ATMF_UNI31 1 /* switch - ATM Forum UNI v3.1 */
-#define SW_IISP_UNI30 2 /* switch - Interim Inter-Switch Signalling Protocol */
-#define SW_IISP_UNI31 3 /* switch - Interim Inter-Switch Signalling Protocol */
-#define SW_Q2931 4 /* switch - ITU - 2931 */
-#define SW_ATMF_SIG_PNNI 5 /* switch - ATM Forum PNNI Signalling */
-#define SW_ATMF_UNI40 6 /* switch - ATM Forum UNI v4.0 */
-#define SW_ATMF_SIG_AINI 7 /* switch - ATM Forum AINI Signalling */
-#define SW_INVALID 0xff /* switch - invalid value */
-
-/* information element id's */
-
-#define AM_ME_ETOETRANSDLY 0x42 /* End-to-End Transit Delay */
-#define AM_ME_CONNNMB 0x4c /* Connected number */
-#define AM_ME_CONNSAD 0x4d /* Connected Subaddress */
-#define AM_ME_TFCDESC 0x59 /* ATM Traffic Descriptor */
-#define AM_ME_BHILYRINFO 0x5d /* Broadband High Layer Info */
-#define AM_ME_BLOLYRINFO 0x5f /* Broadband Low Layer Info */
-#define AM_ME_CDPTYNMB 0x70 /* Called Party Number */
-#define AM_ME_CDPTYSAD 0x71 /* Called Party Sub Address */
-#define AM_ME_CDPTYSOFTPVC 0xe0 /* Called party soft PVPC/PVCC */
-#define AM_ME_CRANKBACK 0xe1 /* Crankback */
-#define AM_ME_DSGTRANLST 0xe2 /* Designated Transit list */
-#define AM_ME_CGPTYSOFTPVC 0xe3 /* Calling party soft PVPC/PVCC */
-#define AM_ME_MINACCTFCDESC 0x81 /* Minimum Acceptable Tfc. Desc. */
-#define AM_ME_ALTTFCDESC 0x82 /* Alternative ATM Tfc. Desc. */
-#define AM_ME_ABRSETUPPARAM 0x84 /* ABR Setup Parameters */
-#define AM_ME_ABRADDPARAM 0xe4 /* ABR Additional Parameters */
-#define AM_ME_EXTQOSPARAM 0xec /* Extended Qos Parameter */
-
-/* information element idx's */
-
-#define AM_MEI_TFCDESC 0x06 /* ATM Traffic Descriptor */
-#define AM_MEI_BHILYRINFO 0x09 /* Broadband High Layer Info */
-#define AM_MEI_BLOLYRINFO 0x0b /* Broadband Low Layer Info */
-#define AM_MEI_CDPTYNMB 0x12 /* Called Party Number */
-#define AM_MEI_CDPTYSAD 0x13 /* Called Party Sub Address */
-#define AM_MEI_CRANKBACK 0x1f /* Crankback */
-#define AM_MEI_CDPTYSOFTPVC 0x20 /* Called Party Soft PVPC/PVCC */
-#define AM_MEI_CONNNMB 0x21 /* Connected number */
-#define AM_MEI_CONNSAD 0x22 /* Connected sub address */
-#define AM_MEI_DSGTRANLST 0x23 /* Designated Transit List */
-#define AM_MEI_CGPTYSOFTPVC 0x34 /* Calling Party Soft PVPC/PVCC */
-#define AM_UNKNOWN 0xfe /* message type unknown */
-
/* addressing related defines */
-/* numbering plan identification */
-
-#define AM_NMBPLN_UNK 0x00 /* unknown */
-#define AM_NMBPLN_ISDN 0x01 /* ISDN/telephony numbering plan (E.164) */
-#define AM_NMBPLN_NSAP 0x02 /* ISO NSAP */
-#define AM_NMBPLN_PVT 0x09 /* private */
-
-\f
-/* ATM address types */
-
-#define ATMADDR_TYPE_E164 AM_NMBPLN_ISDN /* E.164 format */
-#define ATMADDR_TYPE_AESA AM_NMBPLN_NSAP /* ATM forum AESA format */
-
/* maximum size of VCC table */
#define MAX_ATMVCCTBL_SZ 16
/* maximum number of ATM addresses in the ATM address table */
#define MAX_ATMADDRTBL_SZ 4
-
-/* type of number */
-
-#define AM_TYPNMB_UNK 0x00 /* unknown */
-#define AM_TYPNMB_INT 0x01 /* international */
-#define AM_TYPNMB_NAT 0x02 /* national */
-#define AM_TYPNMB_NSP 0x03 /* network specific */
-#define AM_TYPNMB_SUB 0x04 /* subscriber number */
-#define AM_TYPNMB_ABR 0x06 /* abbreviated */
-
-/* screening indicator */
-
-#define AM_SCRIND_USRNOTSCR 0x00 /* user provided, not screened */
-#define AM_SCRIND_USRVERPASS 0x01 /* user provided, verified and passed */
-#define AM_SCRIND_USRVERFAIL 0x02 /* user provided, verified and failed */
-#define AM_SCRIND_NET 0x03 /* network provided */
-
-/* presentation indicator */
-
-#define AM_PRSIND_ALLOW 0x00 /* presentation allowed */
-#define AM_PRSIND_RESTRICT 0x01 /* presentation restricted */
-#define AM_PRSIND_NOTAVAIL 0x02 /* number not available */
-
-/* odd/even indicator */
-
-#define AM_OEIND_EVEN 0x00 /* even */
-#define AM_OEIND_ODD 0x01 /* odd */
-
-/* type of subaddress */
-
-#define AM_TYPSAD_NSAP 0x00 /* NSAP */
-#define AM_TYPSAD_USER 0x01 /* user specified - ATM Endsystem addr */
-#define AM_TYPSAD_USERSPEC 0x02 /* user specified */
/* authority and format identifiers for OSI NSAP addresses */
-
-/* AFI for individual address */
-#define AFI_DCC 0x39 /* BCD format for ISO DCC */
-#define AFI_ICD 0x47 /* BCD format for ISO ICD */
-#define AFI_E164 0x45 /* BCD format for E.164 */
-
-/* AFI for group addresses */
-#define AFI_GRP_DCC 0xBD /* BCD format for ISO DCC */
-#define AFI_GRP_ICD 0xC5 /* BCD format for ISO ICD */
-#define AFI_GRP_E164 0xC3 /* BCD format for E.164 */
-
+#if 0
/* low layer information - layer 2 id */
#define AM_LLI_L2ID 2 /* layer 2 id */
#define AM_EQP_ORG_USR 0x00 /* originating user */
#define AM_EQP_ORG_INTNET 0x01 /* intermediate network */
-
/* ABR Setup parameter identifiers */
#define AM_ASP_FAICR_ID 0xC2 /* forward ABR initial cell rate identifier */
#define AM_ATC_ABR 0x0C /* ABR */
#define AM_ATC_RTVBRCLR 0x13 /* Real time VBR with CLR commitment on CLP=0+1 */
+#endif
\f
/* defines for UME */
#define UM_MAXLEN_OBJ_ID 34 /* max length of an object-id */
-
+#if 0
/* PNNI qos class definitions
*/
#define PN_QOS_CLASS_UBR 0 /* unspecified */
/* maximum number of ports per neighbor -- change if you expect more
*/
#define PN_MAX_PORTS_NBR 5
+#endif
/* Peer group and node identifier length */
#define PN_PGID_LEN 14
#define PN_NODEID_LEN 22
+#if 0
/* maximum number of qos classes */
#define PN_NUM_QOS_CLASSES 5
#define AM_OTD_ETOEF5_0 0X00 /* 0% of FPCR/BPCR (CLP=0+1) */
#define AM_OTD_ETOEF5_01 0x01 /* 0.1% of FPCR/BPCR (CLP=0+1) */
#define AM_OTD_ETOEF5_1 0x04 /* 1% of FPCR/BPCR (CLP=0+1) */
-
+#endif
#endif /* CMFILE_REORG_1 */
/* degines for management confirms */
#define LCM_REASON_INVALID_PAR_VAL 13 /* invalid parameter value */
#define LCM_REASON_QINIT_FAIL 15 /* queue initialization failed */
#define LCM_REASON_NEG_CFM 16 /* negative confirmation */
+#define LCM_REASON_HASHING_FAILED 20 /* Hashing failed */
+#if 0
#define LCM_REASON_UPDTMR_EXPIRED 17 /* update timer expired */
#define LCM_REASON_MISC_FAILURE 18 /* miscellaneous failures */
#define LCM_REASON_EXCEED_CONF_VAL 19 /* Exceeds configured value */
-#define LCM_REASON_HASHING_FAILED 20 /* Hashing failed */
#define LCM_REASON_PEERCFG_NOT_DONE 21 /* swft -peer sap not configured */
#define LCM_REASON_PRTLYRCFG_NOT_DONE 22 /* swft -portable lyr not configured */
/* common Distributed FT/HA related failure reasons */
#define LCM_REASON_INV_DIST_QUAL 29 /* Inv. qual. of dist type*/
#define LCM_REASON_NAK_RCVD 30 /* Got a nak failure */
#define LCM_REASON_TIMEOUT 31 /* Got a timeout failure */
-#define LCM_REASON_PURE_FTHA 32 /* A req for Dist FTHA is recv
- * by a Pure FTHA mod */
+#define LCM_REASON_PURE_FTHA 32 /* A req for Dist FTHA is recv by a Pure FTHA mod */
#define LCM_REASON_DIST_FTHA 33 /* A req for Pure FTHA is recv
* by a Dist FTHA mod */
#define LCM_REASON_INV_KEY 34 /* Invalid key */
#define LCM_REASON_DFL_SPC_DEL_NOT_ALLOWED 44 /* control request has got default spcs that configured in the network */
#define LCM_REASON_NOTHING_TO_DELETE 45 /* control request has got zero spcs to delete */
#define LCM_REASON_SPC_ALREADY_DELETED 46 /* spc's are already deleted */
-
#define LCM_REASON_LYR_SPECIFIC 256 /* protocol specific reasons */
/* gen_h_001.main_125- Addition - SUA support*/
#define LCM_REASON_ASP_CONFIG 47 /* ASP Configuration Error */
/* gen_h_001.main_142:Added new error type*/
#define LCM_REASON_ULLOCK_INIT_FAILED 48 /* UL Lock creation Error */
+#endif
/* category */
#define LCM_CATEGORY_PROTOCOL 1 /* protocol related */
/* events */
#define LCM_EVENT_UI_INV_EVT 1 /* upper interface invalid event */
+#define LCM_EVENT_BND_FAIL 8 /* Bind failure */
+#define LCM_EVENT_BND_OK 11 /* bind ok */
+#define LCM_EVENT_SMEM_ALLOC_FAIL 12 /* static memory alloc fail */
+#define LCM_EVENT_DMEM_ALLOC_FAIL 13 /* Dynamic mmemory alloc fail */
+
+#if 0
#define LCM_EVENT_LI_INV_EVT 2 /* lower interface invalid event */
#define LCM_EVENT_PI_INV_EVT 3 /* peer interface invalid event */
#define LCM_EVENT_INV_EVT 4 /* general invalid event */
#define LCM_EVENT_INV_STATE 5 /* invalid internal state */
#define LCM_EVENT_INV_TMR_EVT 6 /* invalid timer event */
#define LCM_EVENT_MI_INV_EVT 7 /* mngmnt interface invalid event */
-#define LCM_EVENT_BND_FAIL 8 /* Bind failure */
#define LCM_EVENT_NAK 9 /* destination naked a request */
#define LCM_EVENT_TIMEOUT 10 /* timeout when waiting for reply */
-#define LCM_EVENT_BND_OK 11 /* bind ok */
-#define LCM_EVENT_SMEM_ALLOC_FAIL 12 /* static memory alloc fail */
-#define LCM_EVENT_DMEM_ALLOC_FAIL 13 /* Dynamic mmemory alloc fail */
/*Alarms for distributed FTHA environment*/
#define LCM_EVENT_SEQERR 14 /* seq error (standby) */
#define LCM_EVENT_OOM 15 /* board mem threshold exceeded */
#define LCM_EVENT_UPDMSG_ERR 16 /* update message decode error */
#define LCM_EVENT_HTBT_EXP 17 /* Heartbeat timer expiry */
#define LCM_EVENT_TRANSLATION_FAILURE 18 /* primitive translation failure */
+#endif
/*gen_h_001.main_137:Moved Events for alarm indication at various Dns Events to lso.h*/
#define LCM_EVENT_LYR_SPECIFIC 256 /* protocol specific events */
#define LCM_CAUSE_MGMT_INITIATED 8 /* mgmt initiated */
#define LCM_CAUSE_INV_STATE 9 /* Invalid state */
#define LCM_CAUSE_TMR_EXPIRED 10 /* Invalid state */
-#define LCM_CAUSE_INV_MSG_LENGTH 11 /* Invalid state */
#define LCM_CAUSE_PROT_NOT_ACTIVE 12 /* protocol layer not active */
#define LCM_CAUSE_INV_PAR_VAL 13 /* invalid parameter value */
#define LCM_CAUSE_NEG_CFM 14 /* negative confirmation */
#define LCM_CAUSE_MEM_ALLOC_FAIL 15 /* memory allocation failure */
+#if 0
+#define LCM_CAUSE_INV_MSG_LENGTH 11 /* Invalid state */
#define LCM_CAUSE_HASH_FAIL 16 /* hashing failure */
#define LCM_CAUSE_VERSION_MISMATCH 17 /* interface version mismatch */
#define LCM_CAUSE_SWVER_NAVAIL 18 /* intf ver not found */
#define LCM_CAUSE_INV_ACTION 20 /* Invalid Control Action */
/* gen_h_001.main_129 - defined new cause */
#define LCM_CAUSE_NETWK_INITIATED 21 /* user initiated */
+#endif
#define LCM_CAUSE_LYR_SPECIFIC 256 /* protocol specific causes */
+#if 0
/* Interface identifier names for rolling upgrade. Each of the product *
* interface is given a unique number */
/* Layer management interface identifiers */
#define HWPIF 272 /* eGTP-C PSF peer interface ID */
/* gen_h_001.main_141: Added the interface version for PSF DIAMETER */
#define JCPIF 273 /* PSF DIAMETER peer interface ID */
+#endif
-/* Maximum no.of interfaces a product a support on the upper/lower interface */
-#define MAX_INTF 2 /* Max intf to a usr/prov */
-
-/* defines for SCCP ISNI and INS routing */
-#define MAX_ISNI_NID 0x07 /* Maximum no. of NIDs is ISNI */
-#define MAX_INS_NID 0x02 /* Maximum no. of NIDs in INS */
-
-\f
-/* defines for mode */
-
-#define LOOPBACK_MODE 0 /* loopback mode */
-#define TESTING_MODE 1 /* testing mode */
-#define HARDWARE_MODE 2 /* hardware mode */
/* bind status */
#define CM_BND_OK 1 /* bind request OK */
Code Review / o-du / l2.git / blobdiff