--- /dev/null
+/*******************************************************************************
+################################################################################
+# Copyright (c) [2017-2019] [Radisys] #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+*******************************************************************************/
+
+/********************************************************************20**
+
+ Name: environment options
+
+ Type: C include file
+
+ Desc: Environment options specifies defines required by the
+ by TRILLIUM software. The defines in this file need to be
+ changed by the customer to reflect the software architecture
+ needed to run under the target system hardware architecture.
+
+ File: envopt.h
+
+*********************************************************************21*/
+
+#ifndef __ENVOPTH__
+#define __ENVOPTH__
+#define IOT_REPETITION
+
+\f
+/* defines */
+/**************************************************************************
+ general parameters
+**************************************************************************/
+/* error checking, choose none or one */
+
+#ifdef NOERRCHK
+#else
+#define ERRCHK /* error checking */
+#endif /* NOERRCHK */
+
+#undef CM_PASN_DBG
+
+/**************************************************************************
+ unix - multi-threaded system services
+**************************************************************************/
+/* Multi threaded solaris/linux operating system */
+#ifdef MT /* unix - multi-threaded */
+#define MT_SOL /* Solaris Thread Architecture */
+#endif
+
+#ifndef SS_MT
+#define SS_MT
+#endif
+//#define UL_ADPT_DBG
+//#define MAC_5GTF_UPDATE
+#define PRE_DEF_UE_CTX
+//#define ENB_SUPPORT_RLC_UM_MODE
+#define TMR_BASED_TPT_PRINT_5GTF
+#define EG_GEN_LOAD_5GTF
+/*Refer 6.3.2 5G-PDCP SN "V5G_323_v1p0"*/
+//#define SN_PDCP_5GTF
+//#define PCAP_IP_DATGEN_LOAD_5GTF
+#define NO_BSR_SR_5GTF
+//#define PAL_ENABLE_UL_CA
+#define DROP_UL_MSG_5GTF
+#define TFU_5GTF
+#define RG_5GTF
+#undef SCH_5GTF_STATS
+#define DISABLE_RLOG
+/* Flags that apply for the entire product are defined here */
+/* The legacy and the system services defintions are here */
+#define USE_LINUX
+#define CMINET_BSDCOMPAT
+/* #define SS_TICKS_SEC 100 */
+#define CMFILE_REORG_1
+#define CMFILE_REORG_2
+#define CM_INET2
+#define SSINT2
+#undef HI_MULTI_THREADED
+#define SS_PERF
+#define SS_WL_REGION 1
+#define SS_FLOAT
+#define SS_MT_TMR
+#define SS_M_PROTO_REGION
+#define SLES9_PLUS
+#undef SS_TSKLOG_ENABLE
+#define SS_MULTICORE_SUPPORT
+#undef SS_USE_ICC_MEMORY
+#define SS_LOCKLESS_MEMORY
+#define SS_USE_ZBC_MEMORY
+#define SS_THR_REG_MAP
+#undef SS_RBUF
+#undef SS_LICENSE_CHECK
+#undef SS_ROUTE_MSG_CORE1
+#undef SS_DBUF_REFLOCK_DISABLE
+
+#undef SSI_MEM_CORR_PREVENTION
+#undef MS_MBUF_CORRUPTION
+
+/* 5GNR product specific definations are starts here */
+#ifndef RLC_5GNR
+#define RLC_5GNR
+#endif
+/* define AM_RLC_SN_18_BIT means 18 bit SN otherwise 12 bit SN */
+//#define AM_RLC_SN_18_BIT
+//#define NR_PDCP_DRB_SN_18_BIT
+
+/* LTE product specific definitions are here */
+#define TUCL_TTI_RCV
+#define LTE_PAL_ENB
+#define LTE_ENB_PAL
+#define TENB_RTLIN_CHANGES
+#define TENB_SPLIT_ARCH_SUPPORT
+#define TENB_SPLIT_ARCH
+#undef TENB_T2K3K_SPECIFIC_CHANGES
+#undef MLOG_ENABLED
+#undef MSPD_DBG_ENABLE
+#undef MSPD_MLOG_NEW
+#define TTI_PROC_FIRST
+#undef FLAT_BUFFER_OPT
+#undef NTL_LIB
+#undef TENB_UL_FP
+#undef TENB_AS_SECURITY
+#undef LTE_L2_MEAS
+
+#undef LTEPHY_MSPD
+
+#undef DAM_PDCP_OPT
+#define TENB_MAX_UE_SUPPORTED 32
+
+#if MACHINE==BIT64
+#define BIT_64 1
+#define ALIGN_64BIT
+#endif
+#define REL_850
+#define TA_NEW
+#undef TENB_FP
+#if defined(MODE) && (MODE==TDD)
+#define LTE_TDD 1
+#define TFU_TDD
+#undef MSPD_TDD_LTE
+#undef MSPD_TDD
+#undef MSPD_TDD_DBG
+#define PHY_3828
+#define PHY_3829
+#define SPLIT_RLC_DL_TASK
+#undef RG_SCH_DYNDLDELTA
+#else
+#undef LTE_TDD
+#undef LA_VER3
+#undef TFU_TDD
+#define T2200_FDD_CPU_OVRLD
+#undef MSPD_PHY_NEW
+#define T2200_2GB_DDR_CHANGES
+#define BEST_EFFORT_2_UE_PER_TTI
+#define KWSELFPSTDLCLEAN
+#define BATCH_PROCESSING_DL
+#define BATCH_PROCESSING_UL
+#define TL_ALLOC_ICC_MEM
+#undef YS_MS_UL_ZBC
+#endif
+
+#undef PDCP_RLC_DL_RBUF
+#undef MAC_RLC_UL_RBUF
+#undef NTL_LIB_DIS_FOR_UL
+#undef TFU_ALLOC_EVENT_NO_INIT
+#if defined(MODE) && (MODE==TDD)
+#define KWSELFPSTDLCLEAN
+#else
+#define YSMS_RLF_DETCT
+#define LA_VER2
+#endif
+
+
+#if defined(CA_ENABLE) && (CA_ENABLE==YES)
+#define CA_PAL_5GTF
+#define TENB_MULT_CELL_SUPPRT
+#define LTE_ADV
+#define CA_PHY 1
+#define LTE_ADV_UECAP
+#undef CA_DBG
+#define NTL_LIB_DIS_FOR_UL
+#ifndef SPLIT_RLC_DL_TASK
+#ifndef CA_PAL_5GTF
+#define SPLIT_RLC_DL_TASK
+#endif
+#endif
+#endif
+
+#ifdef SPLIT_RLC_DL_TASK
+#define MAC_RLC_HARQ_STA_RBUF
+#define RLC_MAC_STA_RSP_UL_RBUF
+#endif
+#define TENB_STATS
+
+
+/* Interface flags - The interface flags are shared by more than */
+/* one layer and hence need to be defined in a common place. */
+
+/* KWU interface definition */
+#define CCPU_OPT
+
+/* SZT interface (App<->S1AP) flags */
+#define SZTV1
+#define SZTV2
+#define SZTV3
+
+/* CZT interface (App<->X2AP) flags */
+#define CZTV1
+
+/* LSZ interface (SM<->S1AP) flags */
+#define LSZV1
+
+/* LEG interface (SM<->EGTP) flags */
+#define LEGV2
+
+/* CTF interface (App<->CL) flags */
+#define CTF_VER3
+#undef CTF_V3
+
+/* CPJ interface (RRC<->PDCP) flags */
+#define CPJ_V2
+
+/* TFU interface flags */
+#ifdef LTE_TDD
+#define TFU_TDD
+#else
+#undef TFU_TDD
+#endif
+
+#define TFU_UPGRADE 1
+#define TFU_VER_2
+
+/* RGR interface (APP<->SCH) flags */
+#define RGR_V1
+#define RGR_V2
+#define RGR_CQI_REPT
+#define RGR_SI_SCH
+#define RGR_RRM_TICK
+
+/* RRM related interface flags */
+#define RM_INTF
+
+/* LSB interface flags */
+#define LSB4
+#define LSB8
+#define SB_CHECKSUM /* Define to include trillium supplied function */
+#define SB_CHECKSUM_CRC
+
+/**************************************************************************
+ Layer manager interface version definition
+**************************************************************************/
+#define LMINT3 /* interface 3 */
+
+#ifdef SS /* Common System Services */
+/**************************************************************************
+ Common System Services parameters
+**************************************************************************/
+/* product specific options */
+#define SS_RTR_SUPPORT /* for supporting router tasks */
+
+#ifdef SS_DRVR_SUPPORT
+/* for backward compatibility */
+#define ENB_RELAY
+/* for forward compatibility */
+#define RYINT1
+#endif /* SS_DRVR_SUPPORT */
+
+/* post format, choose none or one */
+#define FCSPOSTINT /* forward compatibility, post format */
+
+#endif /* SS */
+
+/**************************************************************************
+ MTSS-Solaris parameters
+**************************************************************************/
+#ifdef SS_MT /* MTSS-Solaris */
+#ifndef CONAVL
+#define CONAVL /* console availability option */
+#endif
+#define STDIO_INCLD
+#endif
+/******************************************************************/
+/* SCTP Layer */
+/******************************************************************/
+#ifdef SB
+
+/* List of other layers interacting with SCTP and in the same binary */
+#ifndef SM
+#define SM
+#endif
+
+#ifndef SZ
+#define SZ
+#endif
+
+#ifndef CZ
+#define CZ
+#endif
+
+#ifndef HI
+#define HI
+#endif
+
+/* Coupling with other layers */
+#define LCSBUISCT
+#define LCSBLIHIT
+#define LCSBMILSB
+
+/* new TUCL layer */
+#ifndef HI_REL_1_4
+#define HI_REL_1_4
+#endif
+
+#ifdef IPV6_SUPPORTED
+#define SB_IPV6_SUPPORTED
+#endif
+
+/* Checksum */
+/* needed dependencies */
+#ifdef LCSBUISCT
+#ifndef LCSCT
+#define LCSCT 1
+#endif
+#endif
+
+#ifdef LCSBMILSB
+#ifndef LCLSB
+#define LCLSB 1
+#endif
+#endif
+
+#ifdef LCSBLIHIT
+#ifndef LCHIT
+#define LCHIT 1
+#endif
+#endif
+
+/*----- SCTP have dependencies in LSB and SCT ------*/
+#ifdef LCLSB
+#ifndef LCSCT
+#define LCSCT
+#endif
+#endif
+
+/*----- SCTP have dependencies in LSB and SCT ------*/
+#ifdef LCSCT
+#ifndef LCLSB
+#define LCLSB
+#endif
+#endif
+
+#endif /* SB */
+
+/**************************************************************************
+ S1AP Section
+**************************************************************************/
+#ifdef SZ
+#undef SZ
+#define SZ 1
+
+/* Define the layers that coexist with S1AP. */
+#ifndef SB
+#define SB
+#endif
+
+#ifndef UZ
+#define UZ
+#endif
+
+#ifndef SM
+#define SM
+#endif
+
+/* product options */
+#define SZ_ENB
+#define CM_PASN_CRIT_HANDL
+#undef M_PASN_DBG
+#undef S1AP_REL851
+#define SZ_DYNAMIC_PEER
+#define SZ_USTA
+
+/* interface options */
+#define LCSZUISZT /* loosely coupled, SZ upper layer SZT interface */
+#define LCSZMILSZ /* loosely coupled, SZ manegement LSZ interface */
+#define LCSZLISCT /* loosely coupled, SZ lower layer SCT interface */
+
+/* Based on the selection of coupling above the section below */
+/* defines enabling/disabling of loose coupling on the */
+/* respective interfaces */
+/* ****** THIS SECTION REQUIRES NO FURTHER CHANGES. ********** */
+/* Interface between S1AP and Application */
+#ifdef LCSZUISZT
+#ifndef LCSZT
+#define LCSZT 1
+#endif
+#endif
+
+/* Interface between S1AP and management (SM) */
+#ifdef LCSZMILSZ
+#ifndef LCLSZ
+#define LCLSZ 1
+#endif
+#endif
+
+/* Interface between S1AP and Application */
+#ifdef LWLCSZUISZT
+#ifndef LWLCSZT
+#define LWLCSZT
+#endif
+#endif
+
+/* Interface between SCTP and S1AP */
+#ifdef LCSZLISCT
+#ifndef LCSCT
+#define LCSCT
+#endif
+#endif
+
+#endif /* SZ */
+
+/******************************************************************/
+/* EGTP Layer */
+/******************************************************************/
+#ifdef EG
+
+/* Product flags */
+#define EGTP_U 1 /* LTE Evolved GTP User Plane Protocol */
+
+
+/* All the layers that this layer interacts with and are part of */
+/* the binary are to be included here. */
+#ifndef EU
+#define EU
+#endif
+
+#ifndef HI
+#define HI
+#endif
+
+#ifndef SM
+#define SM
+#endif
+
+#ifdef IPV6_SUPPORTED
+#define EG_IPV6_SUPPORTED
+#endif
+
+/* EGTP does not use loose coupling towards higher layers and does */
+/* not talk to TUCL on HIT in the latest TeNB. However if it were */
+/* to use TUCL, it would be loosely coupled as TUCL is multi- */
+/* threaded. */
+/* TODO - LCEGUIEGT should not be needed. */
+#define LCSMEGMILEG
+#define LCEGLIHIT
+#define LCEGUIEGT
+#define LCEGMILEG
+
+/* Managing the loose coupling definitions on the interface based */
+/* how the interface is coupled from E-GTP layer. */
+/* ****** THIS SECTION REQUIRES NO FURTHER CHANGES. ********** */
+#if defined(LCEGMILEG)
+#ifndef LCLEG
+#define LCLEG 1
+#endif
+#endif
+
+#if defined(LCEGLIHIT)
+#ifndef LCHIT
+#define LCHIT 1
+#endif
+#endif
+
+#ifdef LCEGUIEGT
+#ifndef LCEGT
+#define LCEGT
+#endif
+#endif
+#endif /* EG */
+
+/*************************************************************************/
+/* LTE-RRC Section */
+/*************************************************************************/
+#ifdef NH
+#undef NH
+#define NH 1
+
+/* Define other layers that are part of the same binary */
+/* Along with RRC, we have application(NX,WR) and stack */
+/* manager (SM). */
+#ifndef SM
+#define SM
+#endif
+
+/* TODO - We need either WR or NX and not necessarily */
+/* both of them. See if we can remove one of it. */
+#ifndef NX
+#define NX
+#endif
+
+#ifndef WR
+#define WR
+#endif
+
+
+/* RRC layer functionality flags */
+#define DISABLE_RRCSEC
+
+/* Interface coupling related flags */
+/* TODO - LCNHUINHU should not be needed. */
+/* TODO - LCWRLINHU should not be needed. */
+#define LWLCNHUINHU
+#define LCNHUINHU
+#define LCNHLICPJ
+#define LCNHLIPJU
+#define LCNHLICKW
+#define LCNHLIKWU
+#define LCNHLICTF
+#define LCNHMILNH
+#define LCWRLINHU
+
+/* CRG interface between MAC and RRC should be loosely coupled */
+#define LCNHLICRG
+
+/* Loose coupled NHU */
+#ifdef LCNHUINHU
+#ifndef LCNHU
+#define LCNHU 1
+#endif
+#endif
+
+/* Light weight loose coupled NHU */
+#ifdef LWLCNHUINHU
+#ifndef LWLCNHU
+#define LWLCNHU 1
+#endif
+#endif
+
+/* Loosely coupled CPJ */
+#ifdef LCNHLICPJ
+#ifndef LCCPJ
+#define LCCPJ 1
+#endif
+#endif
+
+/* Loosely coupled PJU */
+#ifdef LCNHLIPJU
+#ifndef LCPJU
+#define LCPJU 1
+#endif
+#endif
+
+/* Loosely coupled CRG */
+#ifdef LCNHLICRG
+#ifndef LCCRG
+#define LCCRG 1 /* loosely coupled CRG interface */
+#endif
+#endif
+
+/* Loosely coupled CTF */
+#ifdef LCNHLICTF
+#ifndef LCCTF
+#define LCCTF 1 /* loosely coupled CTF interface */
+#endif /* LCCTF */
+#endif /* LCNHLICTF */
+
+#ifdef LCNHLICKW
+#ifndef LCCKW
+#define LCCKW 1 /* loosely coupled CKW interface */
+#endif
+#endif
+#define LCNHLIKWU
+#ifdef LCNHLIKWU
+#ifndef LCKWU
+#define LCKWU 1 /* loosely coupled KWU interface */
+#endif
+#endif
+
+/* TODO These flags should move to SM definitions */
+#define LCSMNHMILNH
+
+/* Define flags related to loosely coupled LNH interface */
+#ifdef LCNHMILNH
+#ifndef LCLNH
+#define LCLNH 1
+#endif
+#endif
+
+/* Release 9 related flags */
+#ifdef LTERRC_REL9
+#define S1AP_REL9A6
+#ifndef LNH_VER1
+#define LNH_VER1
+#endif
+#ifndef NHU_VER1
+#define NHU_VER1
+#endif
+#endif /* LTERRC_REL9 */
+
+#ifdef RRC_PHY_CFG_SUPP
+#define CTF_VER1
+#endif
+
+#define RNC_INTEG_CCPU
+
+#endif /* NH */
+
+/****************************************************************************
+ CL section
+****************************************************************************/
+#if (defined(TF) || defined(YS))
+
+/* Self entity definitions */
+#ifndef TF
+#define TF
+#endif
+
+#ifndef YS
+#define YS
+#endif
+
+
+/* Other entity definitions */
+#ifndef RG
+#define RG
+#endif
+
+/* Selection of interface coupling flags */
+#define LCTFUITFU
+#define LCTFUICTF
+#define LCYSUICTF
+#define LCYSUITFU
+#define LCYSMILYS
+
+#if defined(MODE) && (MODE == TDD)
+#define TFU_TDD
+#else
+#undef TFU_TDD
+#endif
+
+/* The handling of enabling LC based on coupling enabled */
+/* between CL and other layers. */
+/* ****** THIS SECTION REQUIRES NO FURTHER CHANGES. ********** */
+#ifdef LCTFUITFU
+#ifndef LCTFU
+#define LCTFU
+#endif
+#endif
+
+#ifdef LCTFUICTF
+#ifndef LCCTF
+#define LCCTF
+#endif
+#endif
+
+#ifdef LCYSUICTF
+#ifndef LCCTF
+#define LCCTF
+#endif
+#endif
+
+#ifdef LCYSMILYS
+#ifndef LCLYS
+#define LCLYS
+#endif
+#endif
+
+#define TFU_WRR_2
+#endif /* YS/TF */
+
+/****************************************************************************
+ LTE-MAC Section
+****************************************************************************/
+#ifdef RG
+#undef RG
+#define RG 1
+
+/* Product options */
+#define RG_PHASE2_SCHED 1
+#undef RG_DEBUG
+#undef TTI_PROC
+#undef PROC_DL
+#undef SCH_TTI_PROC
+#undef TOM
+#undef PAL_MAC_PROC
+#undef UL_PROC_MAC
+#define LTEMAC_RGU_PAD 1
+#define LTEMAC_MIMO 1
+#define LTEMAC_DRX 0
+#define UL_LA 1
+#undef DL_LA
+#define LTEMAC_SPS 0
+#define LTEMAC_DLUE_TMGOPTMZ
+#define RG_DL_DELTA_CHANGE
+#define RG_CMNCH_SCHDELTA_CHANGE
+#undef RG_ULSCHED_AT_CRC
+#define TFU_RECPREQ_DELTA_CHANGE
+#define TFU_DL_DELTA_CHANGE
+#define TFU_UL_DELTA_CHANGE
+#define TFU_DLHQFBK_DELTA_CHANGE
+#define SCH_STATS
+
+/* Define all the layers that are colocated with the MAC layer */
+/* RRC is located on a different binary on a different CPU. RRC */
+/* should not be included here. SM should also not be defined */
+/* as it is also located on a different CPU. */
+#ifndef UR
+#define UR
+#endif
+
+#ifndef KW
+#define KW
+#endif
+
+
+/* This section selects the coupling for each interface related to */
+/* MAC. The section below enabling the coupling code appropriately. */
+/* CCPU_OPT flag enables additional information between MAC and RLC */
+/* that aids in better selection of transport block size. */
+/* TODO - We should delete LWLC for RGM interface. */
+#define LCRGUICRG
+#define LCRGUIRGU
+#define LWLCRGUIRGU
+#define LCRGMILRG
+#define LCRGUIRGR
+#define LCRGLITFU
+#define LCRGUIRGM
+#define LWLCRGUIRGM
+
+/* Managing the loose coupling definitions on the interface based */
+/* how the interface is coupled from MAC layer. */
+/* ****** THIS SECTION REQUIRES NO FURTHER CHANGES. ********** */
+#ifdef LCRGUICRG
+#ifndef LCCRG
+#define LCCRG
+#endif
+#endif
+
+#ifdef LCRGUIRGU
+#ifndef LCRGU
+#define LCRGU
+#endif
+#endif
+
+#ifdef LCRGMILRG
+#ifndef LCLRG
+#define LCLRG
+#endif
+#endif
+
+#ifdef LCRGUIRGR
+#ifndef LCRGR
+#define LCRGR
+#endif
+#endif
+
+#ifdef LCRGLITFU
+#ifndef LCTFU
+#define LCTFU
+#endif
+#endif
+
+#ifdef LCRGUIRGM
+#ifndef RGM_LC
+#define RGM_LC
+#endif
+#endif
+
+#ifdef LWLCRGUIRGM
+#ifndef RGM_LWLC
+#define RGM_LWLC
+#endif
+#endif
+/******************* section to be changed by CUSTOMERS ******************/
+
+#define RG_SC1 1
+/*
+ * Introduced timing deltas in FDD for DL control, DL data,
+ * Reception Request, CRC Indication, HARQ feedback Indication.
+ */
+#ifdef LTEMAC_DLUE_TMGOPTMZ
+/* Delta used between MAC and RLC to recieve data from RLC*/
+#define RGU_DELTA 0
+#else
+#define RGU_DELTA 1
+#endif
+
+#if defined(DLHQ_RTT_OPT) && defined(LOWLATENCY)
+#define TFU_DELTA 2
+#else
+#define TFU_DELTA 2
+#endif
+#define TFU_RECPREQ_DLDELTA 2
+
+#ifdef LTE_TDD
+#define RG_ENV_DL_DELTA (TFU_DELTA + RGU_DELTA)
+
+#define TFU_DLDATA_DLDELTA (TFU_DELTA)
+#define TFU_CRCIND_ULDELTA 2
+#define TFU_ULCNTRL_DELTA (4 - TFU_CRCIND_ULDELTA)
+
+#ifdef MSPD
+/* Number of subframes in advance UL control (DCI-0/PHICH) should be sent from SCH */
+#define TFU_ULCNTRL_DLDELTA 2
+#else
+#define TFU_ULCNTRL_DLDELTA 1
+#endif
+
+#ifdef DLHQ_RTT_OPT
+/* Number of subframes later DL HARQ feedback reaches MAC from PHY */
+#define TFU_ENV_HQFBKIND_ULDELTA 2
+#else
+#define TFU_ENV_HQFBKIND_ULDELTA 3
+#endif
+
+/* Number of subframes in Advance the Downlink control is
+ given from MAC to PHY */
+#define TFU_DLCNTRL_DLDELTA TFU_DELTA
+
+#else /* LTE_TDD */
+/* Number of subframes in advance UL control (DCI/PHICH) should be sent from SCH */
+#define TFU_ULCNTRL_DLDELTA (RG_SCH_CMN_HARQ_INTERVAL - TFU_CRCIND_ULDELTA)
+
+#ifdef LTEPHY_MSPD
+
+/* Number of subframes for UL CRC to reach SCH after reception of data at PHY */
+#define TFU_CRCIND_ULDELTA 2
+
+#else /* LTEPHY_MSPD */
+
+/* Number of subframes in advance DL control should be sent from SCH */
+#define TFU_DLCNTRL_DLDELTA 2
+/* Number of subframes in advance DL data should be sent from MAC */
+#define TFU_DLDATA_DLDELTA 2
+
+/* Number of subframes for UL CRC to reach SCH after reception of data at PHY */
+#define TFU_CRCIND_ULDELTA 2
+/* Number of subframes later DL HARQ feedback reaches SCH from PHY */
+#define TFU_ENV_HQFBKIND_ULDELTA 2
+
+#endif /* LTEPHY_MSPD */
+/* The number of frames ahead that RLC may require a STA IND */
+/* Seperated DL control and DL data timing deltas in FDD */
+#if (TFU_DLDATA_DLDELTA > TFU_DLCNTRL_DLDELTA)
+#define RG_ENV_DL_DELTA (TFU_DLDATA_DLDELTA + RGU_DELTA)
+#else
+#define RG_ENV_DL_DELTA (TFU_DLCNTRL_DLDELTA + RGU_DELTA)
+#endif
+
+#endif /* LTE_TDD */
+
+/* Delta between Random Access Response and Msg-3*/
+#define RGSCH_RARSP_MSG3_DELTA 6
+
+/* PUSCH data reception delta after the PDCCH for uplink(DCI-0) is sent*/
+#define RGSCH_PDCCH_PUSCH_DELTA 4
+
+#ifdef LTEMAC_HDFDD
+#define RG_SCH_HDFDD_DELTA 10
+#endif
+#define RG_ENV_SCH_CMN_DL_DELTA RG_ENV_DL_DELTA /* This parameter should not be less than RG_ENV_DL_DELTA */
+
+#define RG_SCH_NO_DELTA 0 /*Consider no delta */
+/* ccpu00117459 - ADD - Added check if incompatible falgs are enabled*/
+/* HDFDD and TDD cannot be enabled at the same time. */
+#if defined(LTEMAC_HDFDD) && (defined(LTE_TDD) || defined(TFU_TDD))
+#error "Enabling LTEMAC_HDFDD along with LTE_TDD or TFU_TDD is not a valid combination."
+#endif
+
+/* LTE_TDD and TFU_TDD must be enabled for TDD mode */
+#if (defined(LTE_TDD) && (!defined(TFU_TDD))) || (defined(TFU_TDD) && (!defined(LTE_TDD)))
+#error "Both LTE_TDD and TFU_TDD must be enabled for TDD mode of operation."
+#endif
+#endif /* RG */
+
+/****************************************************************************
+ LTE-RLC Section
+****************************************************************************/
+#ifdef KW
+
+/* Only PDCP and MAC are in the same binary. RRC runs on a different */
+/* CPU and should not be defined here. */
+#ifndef RG
+#define RG
+#endif
+
+#ifndef PJ
+#define PJ
+#endif
+
+/* -------- LKW Interface ------*/
+/* This is the interface between RLC and the stack manager */
+/* This should support loosely coupling as they dont run */
+/* in the same thread */
+#define LCKWMILKW
+
+/* -------- CKW Interface ------*/
+/* CKW interface is loosely coupled as RRC and RLC reside */
+/* on two different CPUs running in different threads */
+#define LCKWUICKW
+
+/* -------- KWU Interface ------*/
+/* KWU interface exists between RRC/PDCP and RLC. Since RRC is */
+/* is loosely coupled with RLC, loosely coupled interface is */
+/* enabled. */
+/* CCPU_OPT carries additional information on the interface to */
+/* assit better scheduling at MAC */
+#define LCKWUIKWU
+
+/* RGU interface between RLC and MAC should be light weight */
+/* loosely coupled for performance. */
+/* TODO - Do we also need loose coupled interface */
+#define LWLCKWLIRGU
+#define LCKWLIRGU
+#define CCPU_OPT
+
+/* The management of enabling of loose coupling code based */
+/* on the selection of coupling choice between RLC and other */
+/* modules is below. */
+
+/* Other RLC product flags */
+#undef RLC_STATUS_GEN
+#undef UL_PROC_MAC
+
+/* ****** THIS SECTION REQUIRES NO FURTHER CHANGES. ********** */
+#ifdef LCKWUICKW
+#ifndef LCCKW
+#define LCCKW
+#endif
+#endif
+
+#ifdef LCKWMILKW
+#ifndef LCLKW
+#define LCLKW
+#endif
+#endif
+
+#ifdef LCKWUIKWU
+#ifndef LCKWU
+#define LCKWU
+#endif
+#endif
+
+#endif /* KW */
+
+/****************************************************************************
+ LTE-PDCP Section
+****************************************************************************/
+#ifdef PJ
+
+#ifndef PX
+#define PX
+#endif
+
+#define LCPJMILPJ
+#define LCPJUICPJ
+#define LCPJUIPJU
+
+/* Other PDCP product flags */
+#define LTE_HENB
+#undef CIPH_BATCH_PROC
+
+/* The handling of enabling LC based on whether PDCP enabled */
+/* loose coupling when PDCP is acting as the source. */
+/* ****** THIS SECTION REQUIRES NO FURTHER CHANGES. ********** */
+#ifdef LCPJMILPJ
+#ifndef LCLPJ
+#define LCLPJ
+#endif
+#endif
+
+#ifdef LCPJUICPJ
+#ifndef LCCPJ
+#define LCCPJ
+#endif
+#endif
+
+#ifdef LCKWUIKWU
+#ifndef LCKWU
+#define LCKWU
+#endif
+#endif
+
+#ifdef LCPJUIPJU
+#ifndef LCPJU
+#define LCPJU
+#endif
+#endif
+
+#undef SPACC_NONBLOCKING
+#undef INTEL_NATIVE_SPACC
+#undef INTEL_SPACC_IV_OPTIMIZATION
+#undef SPACC_THREADED
+#endif /* PJ */
+
+/****************************************************************************
+ TOTALeNodeB Application section
+****************************************************************************/
+#ifdef WR
+
+/* Since application is many different layers to the lower layers */
+/* it must define multiple entities as self entities. */
+#ifndef EU
+#define EU
+#endif
+
+#ifndef EG
+#define EG
+#endif
+
+/* RRC user */
+#ifndef NX
+#define NX
+#endif
+
+/* S1AP user */
+#ifndef UZ
+#define UZ
+#endif
+
+/* X2AP user */
+#ifndef RS
+#define RS
+#endif
+
+/* Include all the layers that are part of the same binary. */
+/* We have stack manager (SM), S1AP (SZ), X2AP (CZ), RRM (RM), */
+/* RRC(NH) within the same binary. */
+#ifndef SM
+#define SM
+#endif
+
+#ifndef SZ
+#define SZ
+#endif
+
+#ifndef CZ
+#define CZ
+#endif
+
+#ifndef NH
+#define NH
+#endif
+
+#ifndef RM
+#define RM
+#endif
+
+#ifndef PX
+#define PX
+#endif
+
+/* Coupling choices between application and other layers */
+/* TODO - LWLCWRLIRGR should not be needed. */
+/* TODO - LCEULIEGT should not be needed. */
+/* TODO - LCNXLINHU should not be needed. */
+#define LCWRMILWR
+#define LWLCWRMILWR
+#define LCWRLIEGT
+#define LCPXLIPJU
+#define LCWRLICTF
+#define LWLCNXLINHU
+#define LCUZLISZT
+#define LWLCUZLISZT
+#define LCWRLIRGR
+#define LWLCWRLIRGR
+#define LCEULIEGT
+#define LCNXLINHU
+#define LCRSLICZT
+#define LWLCRSLICZT
+#define LCSZUISZT
+
+/* Coupling choices between stack manager and the layers */
+/* TODO LCSMSBMILSB should be replaced with LCSMMILSB. */
+/* TODO LCSMHIMILHI should be replaced with LCSMMILHI. */
+#define LCSMMILEG
+#define LCSMMILCZ
+#define LCSMMILSZ
+#define LCSMSBMILSB
+#define LCSMMILHI
+#define LCSMHIMILHI
+
+/* TODO LCKWMILKW should be changed to LCSMMILKW in SMM */
+/* LCKWMILKW should be used only in RLC product */
+#define LCSMMILRG
+#define LCSMMILNH
+#define LCSMNHMILNH
+#define LCKWMILKW
+#define LCSMMILPJ
+#define LCSMMILRM
+#define LCSMMILYS
+#define LWLCSMMILWR
+#define LCSMMILWR
+#define LWLCSMMILWR
+#define LCSMYSMILYS
+#define LCYSMILYS
+
+/* Application functionality related flags */
+#define SI_NEW
+#define LTE_HO_SUPPORT
+#define WR_SIBS_ENBLD
+#undef WR_DETECT_RLF
+#define WR_DL_CQI
+#define WR_RSYS_KPI
+#define WR_WATCHDOG
+#define WR_IPV6_OAM_WORKAROUND
+
+#undef WR_GRPPWR_CNTRL
+/* #undef ENB_OVRLOAD */
+/* The handling of enabling LC based on whether TeNB enabled */
+/* loose coupling when PDCP is acting as the source. */
+/* ****** THIS SECTION REQUIRES NO FURTHER CHANGES. ********** */
+#ifdef LCWRMILWR
+#ifndef LCLWR
+#define LCLWR
+#endif
+#endif
+
+#ifdef LCWRLINHU
+#ifndef LCNHU
+#define LCNHU
+#endif
+#endif
+
+#ifdef LCSZUISZT
+#ifndef LCSZT
+#define LCSZT
+#endif
+#endif
+#ifdef LCNXLINHU
+#ifndef LCNHU
+#define LCNHU
+#endif
+#endif
+
+#ifdef LWLCNXLINHU
+#ifndef LWLCNHU
+#define LWLCNHU
+#endif
+#endif
+
+#ifdef LCWRLIEGT
+#ifndef LCEGT
+#define LCEGT
+#endif
+#endif
+
+#ifdef LCPXLIPJU
+#ifndef LCPJU
+#define LCPJU
+#endif
+#endif
+
+
+#ifdef LCWRLICTF
+#ifndef LCCTF
+#define LCCTF
+#endif
+#endif
+
+#ifdef LCWRLIRGR
+#ifndef LCRGR
+#define LCRGR
+#endif
+#endif
+
+#ifdef LCRSLICZT
+#ifndef LCCZT
+#define LCCZT
+#endif
+#endif
+
+#ifdef LWLCRSLICZT
+#ifndef LWLCCZT
+#define LWLCCZT
+#endif
+#endif
+
+/* ************* SM and layer interaction flags **************** */
+#ifdef LCSMMILWR
+#ifndef LCLWR
+#define LCLWR
+#endif
+#endif
+
+#ifdef LWLCSMMILWR
+#ifndef LWLCLWR
+#define LWLCLWR
+#endif
+#endif
+
+#ifdef LCSMMILRG
+#ifndef LCLRG
+#define LCLRG
+#endif
+#endif
+
+#ifdef LCSMMILEG
+#ifndef LCLEG
+#define LCLEG
+#endif
+#endif
+
+#ifdef LCSMMILNH
+#ifndef LCLNH
+#define LCLNH
+#endif
+#endif
+
+#ifdef LWLCSMMILWR
+#ifndef LWLCLWR
+#define LWLCLWR
+#endif
+#endif
+
+#ifdef LCSMMILPJ
+#ifndef LCLPJ
+#define LCLPJ
+#endif
+#endif
+
+#ifdef LCKWMILKW
+#ifndef LCLKW
+#define LCLKW
+#endif
+#endif
+
+#ifdef LCSMYSMILYS
+#ifndef LCLYS
+#define LCLYS
+#endif
+#endif
+
+#ifdef LCYSMILYS
+#ifndef LCLYS
+#define LCLYS
+#endif
+#endif
+
+/* TODO - This definition does not follow naming conventions and */
+/* also is a duplicate of the above macro. This should be removed */
+/* from the code and then from this make file. */
+#ifdef LCSMNHMILNH
+#ifndef LCLNH
+#define LCLNH
+#endif
+#endif
+
+#endif /* WR */
+/* ************** End of TeNB Application section *************** */
+
+/****************************************************************************
+ X2AP section
+****************************************************************************/
+#ifdef CZ
+#undef CZ
+#define CZ 1
+
+/* Define the layers that coexist with X2AP. They are SCTP (SB), */
+/* X2AP user (RS/WR), stack manager (SM). */
+#ifndef SB
+#define SB
+#endif
+
+#ifndef RS
+#define RS
+#endif
+
+#ifndef SM
+#define SM
+#endif
+
+/* product options */
+#define CZ_ENB
+#define CZ_DYNAMIC_PEER
+#define CZ_USTA
+
+/* interface options */
+#define LCCZUICZT /* loosely coupled, CZ upper layer CZT interface */
+#define LCCZLISCT /* loosely coupled, CZ lower layer SCT interface */
+#define LCCZMILCZ /* loosely coupled, CZ manegement LCZ interface */
+
+/* Based on the selection of coupling above the section below */
+/* defines enabling/disabling of loose coupling on the */
+/* respective interfaces */
+/* ****** THIS SECTION REQUIRES NO FURTHER CHANGES. ********** */
+/* Interface between S1AP and Application */
+#ifdef LCCZUICZT
+#ifndef LCCZT
+#define LCCZT 1
+#endif
+#endif
+
+/* Interface between X2AP and management (SM) */
+#ifdef LCCZMILCZ
+#ifndef LCLCZ
+#define LCLCZ 1
+#endif
+#endif
+
+/* Interface between X2AP and Application */
+#ifdef LWLCCZUICZT
+#ifndef LWLCCZT
+#define LWLCCZT
+#endif
+#endif
+
+/* Interface between SCTP and X2AP */
+#ifdef LCCZLISCT
+#ifndef LCSCT
+#define LCSCT
+#endif
+#endif
+
+#endif /* CZ */
+
+/* ******************************************************************* */
+/* TUCL section */
+/* ******************************************************************* */
+#ifdef HI
+
+/* Define the products that TUCL directly talks to and are part of the */
+/* same binary. */
+#ifndef SB
+#define SB
+#endif
+
+#ifndef EG
+#define EG
+#endif
+
+#ifndef SM
+#define SM
+#endif
+
+/* We need to define LCHIUIHIT if there is at least one layer talking */
+/* to TUCL in a loosely coupled fashion. */
+#define LCHIUIHIT
+#define LCHIMILHI
+
+/* The section below should not be edited normally. */
+#ifdef LCHIUIHIT
+#ifndef LCHIT
+#define LCHIT
+#endif
+#endif
+
+#ifdef LCHIMILHI
+#ifndef LCLHI
+#define LCLHI
+#endif
+#endif
+#endif /* HI */
+
+/****************************************************************************
+ SON section
+****************************************************************************/
+#ifdef NL
+#define LWLCSMSONILNL
+#define TCSMSONILNL
+#define LCSMSONILNL
+
+
+#ifdef LWLCSMSONILNL
+#define NLU_LWLC
+#endif
+
+#ifdef LCSMSONILNL
+#define NLU_LC
+#endif
+
+#ifdef TCSMSONILNL
+#define NLU_TC
+#endif
+
+#endif
+/****************************************************************************
+ RRM section
+****************************************************************************/
+#ifdef RM
+
+#define LCRMLIRGM
+#define LWLCRMLIRGM
+#define LWLCRMUIRMU
+#define LWLCSMRMMILRM
+#define LCSMRMMILRM
+#define PTSMMILRM
+#define LCRMMILRM
+
+#ifdef LCRMLIRGM
+#ifndef RGM_LC
+#define RGM_LC
+#endif
+#endif
+
+#ifdef LWLCRMLIRGM
+#ifndef RGM_LWLC
+#define RGM_LWLC
+#endif
+#endif
+
+
+
+/* TODO: By conventions we should have this name LCRMU instead of RMU_LC */
+#ifdef LCRMUIRMU
+#ifndef RMU_LC
+#define RMU_LC
+#endif
+#endif
+
+#ifdef LWLCRMUIRMU
+#ifndef RMU_LWLC
+#define RMU_LWLC
+#endif
+#endif
+
+#ifdef LCRMMILRM
+#ifndef LCLRM
+#define LCLRM
+#endif
+#endif
+#endif
+
+#endif /* __ENVOPTH__ */
+
+\f
+/********************************************************************30**
+
+ End of file
+**********************************************************************/
Code Review / o-du / l2.git / blobdiff