*/
typedef struct rgInfEmtcCEmodeARarUlGrt
{
- U8 msg3PUSCHNbIdx; /*!< Indicates the Msg3 PUSCH narrowband index. */
- U8 rbStart; /*!< Start Resource block of allocation. */
- U8 numRb; /*!< Number of resource blocks allocated. */
- U8 msg3PUSCHNumRep; /*!< Number of repetitions for Msg3 PUSCH. */
- U8 iMcsCrnt; /*!< Current MCS index of the grant. */
- U8 tpc; /*!< TPC command for the uplink grant. */
- U8 cqiBit; /*!< Indicates the CQI is enabled or not. */
- U8 delayBit; /*!< Indicates the Delay bit. */
- U8 msg34MPDCCHNbIdx; /*!< Indicates Msg3/4 MPDCCH narrowband index. */
+ uint8_t msg3PUSCHNbIdx; /*!< Indicates the Msg3 PUSCH narrowband index. */
+ uint8_t rbStart; /*!< Start Resource block of allocation. */
+ uint8_t numRb; /*!< Number of resource blocks allocated. */
+ uint8_t msg3PUSCHNumRep; /*!< Number of repetitions for Msg3 PUSCH. */
+ uint8_t iMcsCrnt; /*!< Current MCS index of the grant. */
+ uint8_t tpc; /*!< TPC command for the uplink grant. */
+ uint8_t cqiBit; /*!< Indicates the CQI is enabled or not. */
+ uint8_t delayBit; /*!< Indicates the Delay bit. */
+ uint8_t msg34MPDCCHNbIdx; /*!< Indicates Msg3/4 MPDCCH narrowband index. */
} RgInfEmtcCEmodeARarUlGrnt;
/**
*/
typedef struct rgInfEmtcCEmodeBRarUlGrnt
{
- U8 msg3PUSCHNbIdx; /*!< Indicates the Msg3 PUSCH narrowband index. */
- U8 rbStart; /*!< Start Resource block of allocation. */
- U8 numRb; /*!< Number of resource blocks allocated. */
- U8 msg3PUSCHNumRep; /*!< Number of repetitions for Msg3 PUSCH. */
- U8 iTbsCrnt; /*!< Current TBS index of the grant. */
- U8 msg34MPDCCHNbIdx; /*!< Indicates Msg3/4 MPDCCH narrowband index. */
+ uint8_t msg3PUSCHNbIdx; /*!< Indicates the Msg3 PUSCH narrowband index. */
+ uint8_t rbStart; /*!< Start Resource block of allocation. */
+ uint8_t numRb; /*!< Number of resource blocks allocated. */
+ uint8_t msg3PUSCHNumRep; /*!< Number of repetitions for Msg3 PUSCH. */
+ uint8_t iTbsCrnt; /*!< Current TBS index of the grant. */
+ uint8_t msg34MPDCCHNbIdx; /*!< Indicates Msg3/4 MPDCCH narrowband index. */
}RgInfEmtcCEmodeBRarUlGrnt;
typedef enum rgEmtcCEmodeType
*/
typedef struct rgInfEmtcRarUlGrnt
{
- U8 rgEmtcCEmodeType;
+ uint8_t rgEmtcCEmodeType;
union
{
RgInfEmtcCEmodeARarUlGrnt emtcCEmodeARarUlGrnt;
CM_LTE_LCH_DTCH */
S32 bo; /*!< Buffer occupancy reported by RLC in bytes. */
#ifdef EMTC_ENABLE
- U8 emtcDIReason; /*!< Reason for DI message to send. */
- U8 pnb; /*!< Pagging narrowBand on which Ue perfom paging reception*/
+ uint8_t emtcDIReason; /*!< Reason for DI message to send. */
+ uint8_t pnb; /*!< Pagging narrowBand on which Ue perfom paging reception*/
#endif
union /*!< lcType in the primitive is the union selector. */
{
S32 bo; /*!< Number of bytes reported as Buffer occupancy by RLC. */
#ifdef CCPU_OPT
Bool staPduPrsnt; /*!< Is status PDU present reported by RLC. */
- U16 estRlcHdrSz;/*!< Estimated hader size reported by RLC */
+ uint16_t estRlcHdrSz;/*!< Estimated hader size reported by RLC */
#endif
- U32 staPduBo; /*!< Number of bytes reported as Buffer occupancy for status PDU by RLC.
+ uint32_t staPduBo; /*!< Number of bytes reported as Buffer occupancy for status PDU by RLC.
This is already included in BO.*/
- U32 oldestSduArrTime; /*!< Oldest SDU Arrival Time from Upper Layer */
+ uint32_t oldestSduArrTime; /*!< Oldest SDU Arrival Time from Upper Layer */
Bool setMaxUlPrio; /*!< set when Pollbit is set from RLC in PDU */
Bool setMaxDlPrio; /*!< Set when there is a status PDU in the DL*/
} RgInfDedBoRpt;
typedef struct rgInfRarUlGrnt
{
#ifndef MAC_5GTF_UPDATE
- U8 hop; /*!< Indicates the hopping flag. */
+ uint8_t hop; /*!< Indicates the hopping flag. */
#else
- U8 xPuschRange; /*!< xPUSCH range */
+ uint8_t xPuschRange; /*!< xPUSCH range */
#endif
- U8 rbStart; /*!< Start Resource block of allocation. */
- U8 numRb; /*!< Number of resource blocks allocated. */
- U8 tpc; /*!< TPC command for the uplink grant. */
- U8 iMcsCrnt; /*!< Current MCS index of the grant. */
- U8 delayBit; /*!< Indicates the Delay bit. */
+ uint8_t rbStart; /*!< Start Resource block of allocation. */
+ uint8_t numRb; /*!< Number of resource blocks allocated. */
+ uint8_t tpc; /*!< TPC command for the uplink grant. */
+ uint8_t iMcsCrnt; /*!< Current MCS index of the grant. */
+ uint8_t delayBit; /*!< Indicates the Delay bit. */
#ifndef MAC_5GTF_UPDATE
- U8 cqiBit; /*!< Indicates the CQI is enabled or not. */
+ uint8_t cqiBit; /*!< Indicates the CQI is enabled or not. */
#else
- U8 numBsiRep; /*!< Number of BSI reports. */
- U8 bsiBetaOffIdx; /*!< Index of BSI beta offset used in Msg3 */
- U8 pcrs; /*!< UL dual PCRS */
+ uint8_t numBsiRep; /*!< Number of BSI reports. */
+ uint8_t bsiBetaOffIdx; /*!< Index of BSI beta offset used in Msg3 */
+ uint8_t pcrs; /*!< UL dual PCRS */
#endif
} RgInfRarUlGrnt;
typedef struct rgInfCrntiInfo
{
CmLteRnti tmpCrnti; /*!< Temporary C-RNTI. RNTI range is specified in Section 7.1 in 36.321 specification. */
- U8 rapId; /*!< rapId identifies the index of the Random Access Preamble. rapId ranges from 0 to 63.*/
- TknU16 ta; /*!< Timing Adjustment. Timing Adjustment Value range is defined in Section 6.1.3.5 in 36.321 specification. */
+ uint8_t rapId; /*!< rapId identifies the index of the Random Access Preamble. rapId ranges from 0 to 63.*/
+ TknUInt16 ta; /*!< Timing Adjustment. Timing Adjustment Value range is defined in Section 6.1.3.5 in 36.321 specification. */
RgInfRarUlGrnt grnt; /*!< Uplink Grant to go in RAR. */
Bool isContFree; /*!< Indicates whether the procedure is contention-free or not. */
#ifdef EMTC_ENABLE
*/
typedef struct rgInfRaRntiInfo
{
- U16 raRnti; /*!< RA-RNTI. RNTI range is specified in Section 7.1 in 36.321 specification. */
+ uint16_t raRnti; /*!< RA-RNTI. RNTI range is specified in Section 7.1 in 36.321 specification. */
TfuPdschDciInfo dciInfo; /*!< PDCCH allocated for RA-RNTI. For more information
refer to <i>TFU Interface Service Definition</i> (p/n 1100091). */
- U32 schdTbSz; /*!< Scheduled TB size. schdTbSz value range is defined in Section 7.1.7.2.1 in 36.213
+ uint32_t schdTbSz; /*!< Scheduled TB size. schdTbSz value range is defined in Section 7.1.7.2.1 in 36.213
specification. */
- TknU8 backOffInd; /*!< Indicates the Backoff Indicator value. backOffInd value range
+ TknUInt8 backOffInd; /*!< Indicates the Backoff Indicator value. backOffInd value range
is defined in Section 7.2 in 36.321 specification. */
- U8 numCrnti; /*!< Number of valid RARs in the array. */
+ uint8_t numCrnti; /*!< Number of valid RARs in the array. */
RgInfCrntiInfo *crntiInfo; /*!< RAR information. */
}RgInfRaRntiInfo;
*/
typedef struct rgInfRarInfo
{
- U8 numRaRntis; /*!< Indicates the number of valid RA-RNTIs present. */
+ uint8_t numRaRntis; /*!< Indicates the number of valid RA-RNTIs present. */
RgInfRaRntiInfo *raRntiInfo; /*!< Contains allocation information per RA-RNTI. */
- U16 txPwrOffset; /*!< PDSCH tx power offset for RAR transmission */
+ uint16_t txPwrOffset; /*!< PDSCH tx power offset for RAR transmission */
}RgInfRarInfo;
/**
typedef struct rgInfLcDatInfo
{
CmLList lchLstEnt; /*!< Is not used when part of resource allocation. */
- U8 lcId; /*!< Identifies the logical channel. lcId value range is defined
+ uint8_t lcId; /*!< Identifies the logical channel. lcId value range is defined
in Section 6.2.1 in 36.321 specification. */
- U32 numBytes; /*!< Number of bytes allocated/received to logical channel. */
+ uint32_t numBytes; /*!< Number of bytes allocated/received to logical channel. */
} RgInfLcDatInfo;
/**
*/
typedef struct rgInfExtPhrSCellInfo
{
- U8 sCellIdx; /*!< SCELL index for which PHR is reported */
- U8 phr; /*!< PHR value. PHR value is defined in Section 6.1.3.6a in 36.321 specification. */
- U8 pCmax; /*!< PCMAX value. PCMAX value is defined in Table 6.1.3.6a-1 in 36.321 specification. */
- U8 pBackOff; /*!< If UE applied back off due to P-MPRc in 36.321 specification. */
+ uint8_t sCellIdx; /*!< SCELL index for which PHR is reported */
+ uint8_t phr; /*!< PHR value. PHR value is defined in Section 6.1.3.6a in 36.321 specification. */
+ uint8_t pCmax; /*!< PCMAX value. PCMAX value is defined in Table 6.1.3.6a-1 in 36.321 specification. */
+ uint8_t pBackOff; /*!< If UE applied back off due to P-MPRc in 36.321 specification. */
}RgInfExtPhrSCellInfo;
typedef struct rgInfExtPhrCEInfo
{
- U8 type2Phr; /*!< PHR value. PHR value is defined in Section 6.1.3.6a in 36.321 specification. */
- U8 type2PCMax; /*!< PCMAX value. PCMAX value is defined in Table 6.1.3.6a-1 in 36.321 specification. */
- U8 numServCells; /*!< Number of serving cells for which PHR is reported */
+ uint8_t type2Phr; /*!< PHR value. PHR value is defined in Section 6.1.3.6a in 36.321 specification. */
+ uint8_t type2PCMax; /*!< PCMAX value. PCMAX value is defined in Table 6.1.3.6a-1 in 36.321 specification. */
+ uint8_t numServCells; /*!< Number of serving cells for which PHR is reported */
RgInfExtPhrSCellInfo servCellPhr[CM_LTE_MAX_CELLS];
}RgInfExtPhrCEInfo; /*!< EXT PHR value. EXT PHR value is defined in Section 6.1.3.6a in 36.321 R10 specification. */
*/
typedef struct rgInfCeInfo
{
- U16 bitMask; /*!< Bitmask for the MAC Control elements present. */
+ uint16_t bitMask; /*!< Bitmask for the MAC Control elements present. */
struct
{
- U16 cRnti; /*!< C-RNTI value. RNTI range is specified in Section 7.1 in 36.321 specification. */
- U8 phr; /*!< PHR value. PHR value is defined in Section 6.1.3.6 in 36.321 specification. */
+ uint16_t cRnti; /*!< C-RNTI value. RNTI range is specified in Section 7.1 in 36.321 specification. */
+ uint8_t phr; /*!< PHR value. PHR value is defined in Section 6.1.3.6 in 36.321 specification. */
union
{
- U8 truncBsr; /*!< Truncated BSR value. BSR value is defined in
+ uint8_t truncBsr; /*!< Truncated BSR value. BSR value is defined in
Section 6.1.3.1 in 36.321 specification. */
- U8 shortBsr; /*!< Short BSR value.BSR value is defined in
+ uint8_t shortBsr; /*!< Short BSR value.BSR value is defined in
Section 6.1.3.1 in 36.321 specification. */
struct
{
- U8 bs1; /*!< Buffer size 1 of long BSR. */
- U8 bs2; /*!< Buffer size 2 of long BSR. */
- U8 bs3; /*!< Buffer size 3 of long BSR. */
- U8 bs4; /*!< Buffer size 4 of long BSR. */
+ uint8_t bs1; /*!< Buffer size 1 of long BSR. */
+ uint8_t bs2; /*!< Buffer size 2 of long BSR. */
+ uint8_t bs3; /*!< Buffer size 3 of long BSR. */
+ uint8_t bs4; /*!< Buffer size 4 of long BSR. */
}longBsr; /*!< BSR value is defined in Section 6.1.3.1 in 36.321 specification. */
}bsr;
RgInfExtPhrCEInfo extPhr; /*!< EXT PHR value. EXT PHR value is defined in Section 6.1.3.6a in 36.321 R10 specification. */
#ifdef MAC_5GTF_UPDATE
struct
{
- U8 bar; /*!< Beam Adjusment Request */
- U8 numBsiFields; /*!< Number of BSI fields UE sent in BSI Feedback */
+ uint8_t bar; /*!< Beam Adjusment Request */
+ uint8_t numBsiFields; /*!< Number of BSI fields UE sent in BSI Feedback */
struct
{
- U16 bi; /*!< BSI Feedback : 9 bits Beam Index */
- U8 brsrp; /*!< BSI Feedback :7 bits BRSRP */
+ uint16_t bi; /*!< BSI Feedback : 9 bits Beam Index */
+ uint8_t brsrp; /*!< BSI Feedback :7 bits BRSRP */
}bsiFdbk[4];
}beam;
#endif
} ces;
/* L2_COUNTERS */
#ifdef LTE_L2_MEAS
- U8 ulActLCs[RGINF_MAX_NUM_DED_LC];
+ uint8_t ulActLCs[RGINF_MAX_NUM_DED_LC];
/*!< List of LCs for which Data is received in UL */
#endif
#ifdef LTEMAC_SPS
- U16 spsSduSize;
+ uint16_t spsSduSize;
#endif
} RgInfCeInfo;
typedef struct rgInfLcgInfo
{
- U8 lcgId; /*!< LCGID. GBR DRB LCG */
- U32 bytesRcvd; /*!< Contains bytes received for LCG */
+ uint8_t lcgId; /*!< LCGID. GBR DRB LCG */
+ uint32_t bytesRcvd; /*!< Contains bytes received for LCG */
}RgInfLcgInfo;
/**
CmMemListCp memCp; /*!< Memory control point. */
CmLListCp ueLst; /*!< Pointer to the UE linked list. */
/* RRM_SP1_START */
- U32 qcisUlPrbCnt[RGINF_MAX_GBR_QCI_REPORTS];/*!< UL gbr LC's PRB count*/
+ uint32_t qcisUlPrbCnt[RGINF_MAX_GBR_QCI_REPORTS];/*!< UL gbr LC's PRB count*/
/* RRM_SP1_END */
S16 cellSapId; /*!< Cell SAP Identifier. CellSAP ID value must be within the set of configured cell SAP IDs. */
CmLteCellId cellId; /*!< Identifies the cell. CellId must be within the set of configured cell IDs. */
Bool disTb; /*!< Currently, not used, but is
applicable in MIMO case. */
Bool isReTx; /*!< Indicates the TB transmission type. */
- TknU8 ta; /*!< Timing Adjustment. */
+ TknUInt8 ta; /*!< Timing Adjustment. */
#ifdef LTE_ADV
- TknU8 sCellActCe; /* !< SCell Act values and whether
+ TknUInt8 sCellActCe; /* !< SCell Act values and whether
scheduled or not */
#endif
/* Changed as a result of CR timer implementation*/
- U8 contResCe; /*!< Indicating presence of Contention Resolution CE across MAC-SCH
+ uint8_t contResCe; /*!< Indicating presence of Contention Resolution CE across MAC-SCH
interface to
* identify CCCH SDU transmissions which need to
* be done without the
* contention resolution CE.*/
- U8 numSchLch; /*!< Indicates the number of logical
+ uint8_t numSchLch; /*!< Indicates the number of logical
channels scheduled. */
- U32 schdTbSz;
+ uint32_t schdTbSz;
RgInfLcDatInfo schdDat[RGINF_MAX_NUM_DED_LC]; /*!< Contains
information about scheduled logical
channel. */
*/
typedef struct rgLaaTbReqInfo
{
- U8 sMacInstId;
- U8 sCellHqPId;
- U8 tbId;
- U16 hqPStamp;
+ uint8_t sMacInstId;
+ uint8_t sCellHqPId;
+ uint8_t tbId;
+ uint16_t hqPStamp;
}RgLaaTbReqInfo;
/**
TfuPdschDciInfo dciInfo; /*!< Contains Downlink Control Information. For more information,
refer to <i>TFU Interface Service Definition</i> (p/n 1100091). */
- U8 hqProcId; /*!< HARQ process Identifier. hqProcId ranges between 1 and 8 for FDD mode and 1 and 15 for TDD mode */
+ uint8_t hqProcId; /*!< HARQ process Identifier. hqProcId ranges between 1 and 8 for FDD mode and 1 and 15 for TDD mode */
S8 tbStrtIdx;
- TknU32 doa;
+ TknUInt32 doa;
TfuTxMode txMode;
Bool puschRptUsd;/*!< True, if Precoding Information in PDCCH has to be
in-accordance with the latest PUSCH report */
* information to PHY during a PDSCH */
- U8 nmbOfTBs; /*!< Indicates the number of TBs. Currently this is set to 1. */
+ uint8_t nmbOfTBs; /*!< Indicates the number of TBs. Currently this is set to 1. */
RgInfUeTbInfo tbInfo[RGINF_MAX_TB_PER_UE]; /*!< Contains TB identifier. */
/* LTE_ADV_FLAG_REMOVED_START */
#ifdef TFU_UPGRADE
- U8 pa; /*!< DL Power control paramter P_A
+ uint8_t pa; /*!< DL Power control paramter P_A
configured by higher layers
Ref: RRC 36.331, 6.3.2, PDSCH-Config */
#endif
- U8 isEnbSFR; /*To check if SFR is enabled*/
+ uint8_t isEnbSFR; /*To check if SFR is enabled*/
/* LTE_ADV_FLAG_REMOVED_END */
#ifdef LTE_ADV
Bool fillCtrlPdu; /*!< Based upon this flag RLC will fill RLC Control PDU
*/
typedef struct rgInfUeInfo
{
- U8 numUes; /*!< Number of UEs allocated. */
+ uint8_t numUes; /*!< Number of UEs allocated. */
RgInfUeAlloc *allocInfo; /*!< Allocation information per UE. */
}RgInfUeInfo;
#else
Buffer *pdu; /*!< PDU being specified for BCCH. */
#endif
- U16 txPwrOffset; /*!< PDSCH tx power offset for BCCH
+ uint16_t txPwrOffset; /*!< PDSCH tx power offset for BCCH
transmission */
}RgInfBcchInfo;
CmLteLcId lcId; /*!< Logical Channel Identifier. lcId value range is defined in
Section 6.2.1 in 36.321 specification. */
- U16 txPwrOffset; /*!< PDSCH tx power offset for PCCH
+ uint16_t txPwrOffset; /*!< PDSCH tx power offset for PCCH
transmission */
}RgInfPcchInfo;
*/
typedef struct rgInfCmnLcInfo
{
- U16 bitMask; /*!< Bitmask representing all the common channels present. */
+ uint16_t bitMask; /*!< Bitmask representing all the common channels present. */
RgInfBchInfo bchInfo; /*!< BCH channel Information. */
RgInfPcchInfo pcchInfo; /*!< Paging Logical Channel Information. */
RgInfBcchInfo bcchInfo; /*!< Broadcast Logical Channel Information. */
*/
typedef struct rgInfEmtcCmnLcInfo
{
- U16 bitMask; /*!< Bitmask representing all the common channels present. */
+ uint16_t bitMask; /*!< Bitmask representing all the common channels present. */
RgInfBchInfo bchInfo; /*!< BCH channel Information. */
RgInfPcchInfo pcchInfo; /*!< Paging Logical Channel Information. */
RgInfEmtcBcchInfo emtcBcchInfo; /*!< Broadcast Logical Channel Information. */
typedef struct rgInfUeUlAlloc
{
CmLteRnti rnti; /*!< UE ID */
- U8 numPrb; /*!< Number of total PRB's allocated for this UE */
+ uint8_t numPrb; /*!< Number of total PRB's allocated for this UE */
} RgInfUeUlAlloc;
/**
* */
typedef struct rgInfUlUeInfo
{
- U8 numUes; /*!< Number of UE's*/
+ uint8_t numUes; /*!< Number of UE's*/
CmLteTimingInfo timingInfo; /*!< Uplink timing information */
RgInfUeUlAlloc *ulAllocInfo;/*!< Uplink Allocations information */
}RgInfUlUeInfo;
typedef struct rgInfLcInfo
{
CmLteLcId lcId; /*!< lcId for flow control*/
-
U32 pktAdmitCnt; /*!<Pkts allowed for the LC */
- U32 maxBo4FlowCtrl; /*!< MAX BO of Queued SDUs at RLC beyond which Flow is Controlled */
+
uint32_t pktAdmitCnt; /*!<Pkts allowed for the LC */
+ uint32_t maxBo4FlowCtrl; /*!< MAX BO of Queued SDUs at RLC beyond which Flow is Controlled */
}RgInfLcFlowCntrlInfo;
typedef struct rgInfUeFlowCntrlInfo
{
CmLteRnti ueId; /*!<ueId for flow control*/
- U32 numLcs;/*!<numLcs in the UE*/
+ uint32_t numLcs;/*!<numLcs in the UE*/
RgInfLcFlowCntrlInfo lcInfo[RGINF_MAX_NUM_DED_LC]; /*!<LC list*/
}RgInfUeFlowCntrlInfo;
/**
* @brief This structure contains the flow control information to be sent to MAC */
typedef struct rgInfFlowCntrlInfo
{
- U32 numUes;/*!<Num UEs for flow control */
+ uint32_t numUes;/*!<Num UEs for flow control */
RgInfUeFlowCntrlInfo ueFlowCntrlInfo[RGINF_MAX_NUM_UE_PER_TTI]; /*!<Ue Info for flow control */
}RgInfFlowCntrlInfo;
#ifdef EMTC_ENABLE
{
CmLteRnti rnti; /*!< RNTI which uniquely identifies the UE. RNTI value range is
specified in Section 7.1 in 25.321 */
- U8 hqProcId; /*!< HARQ Process Identifier.
+ uint8_t hqProcId; /*!< HARQ Process Identifier.
hqProcId ranges between 1 and 8 for FDD mode and 1 and 15 for TDD mode. */
- U8 numOfTBs; /*!< Identifies the number of TBs. Currently this is set to 1. */
- U8 tbId[RGINF_MAX_TB_PER_UE]; /*!< Indicates the TB Identifier. */
+ uint8_t numOfTBs; /*!< Identifies the number of TBs. Currently this is set to 1. */
+ uint8_t tbId[RGINF_MAX_TB_PER_UE]; /*!< Indicates the TB Identifier. */
/* MS_WORKAROUND: to increase Harq Fail Counter .
The status field is required for tracking the number of harq faliures at MAC.
As this is already present under L2_MEAS flag, we have replaced it with platform flag */
- U8 status[RGINF_MAX_TB_PER_UE]; /*!< Indicates HARQ ACK or NACK */
- U8 rlsOperationType; /*!< Decides action to be taken in MAC
+ uint8_t status[RGINF_MAX_TB_PER_UE]; /*!< Indicates HARQ ACK or NACK */
+ uint8_t rlsOperationType; /*!< Decides action to be taken in MAC
0x00 RGINF_RLS_HQ_NO_ACTION - Free Hq Procs and TBs
0x01 RGINF_RLS_HQ_SAVE_TB - Free Hq Proc but save the TBs
0x02 RGINF_RLS_HQ_DEL_TB - Del already saved TBs */
- U16 saveId; /*!< Uniquely identify an particular HqP save */
+ uint16_t saveId; /*!< Uniquely identify an particular HqP save */
} RgInfUeHqInfo;
/**
{
CmLteCellId cellId; /*!< Identifies Cell. CellId should be within
the set of configured cell IDs. */
- U8 numUes; /*!< Indicates number of UEs present. */
+ uint8_t numUes; /*!< Indicates number of UEs present. */
RgInfUeHqInfo *ueHqInfo; /*!< Contains UE specific HARQ information. */
}RgInfRlsHqInfo;
{
CmLteCellId cellId; /*!< Identifies the cell. cellId value should be within the set of configured cell IDs. */
S16 cellSapId; /*!< Identifies the cell SAP. cellSapId value should be within the set of configured cell SAP IDs. */
- U8 maxDlHqProcPerUe; /*!< Indicates Maximum number of downlink HARQ processes per UE. */
+ uint8_t maxDlHqProcPerUe; /*!< Indicates Maximum number of downlink HARQ processes per UE. */
}RgInfCellReg;
#ifdef LTE_L2_MEAS
* */
typedef struct rgInfPrbReq
{
- U8 numQci; /*!< Number fo QCI's in Request */
- U8 qci[LRG_MAX_QCI_PER_REQ]; /*!< QCI for which PRB has
+ uint8_t numQci; /*!< Number fo QCI's in Request */
+ uint8_t qci[LRG_MAX_QCI_PER_REQ]; /*!< QCI for which PRB has
to be measured */
} RgInfPrbReq;
typedef struct prbUsage
{
- U8 qciValue; /*!< Qci Value */
-
U32 prbUsage; /*!<Prb Usage for this Qci */
+ uint8_t qciValue; /*!< Qci Value */
+
uint32_t prbUsage; /*!<Prb Usage for this Qci */
}PrbUsage;
/**
* @brief struture to hold measurement confirm for Uplink Average PRB usage per
* */
typedef struct rgInfPrbCfm
{
- U8 numQci; /*!< Number fo QCI's in Request */
+ uint8_t numQci; /*!< Number fo QCI's in Request */
PrbUsage prbUsage[LRG_MAX_QCI_PER_REQ]; /*!< Average PRB usage
per QCI */
} RgInfPrbCfm;
* */
typedef struct RgInfL2MeasReq
{
- U32 transId; /*!< TransId to uniquely identify request */
- U16 measType; /*!< For action type Avegare PRB usage
+ uint32_t transId; /*!< TransId to uniquely identify request */
+ uint16_t measType; /*!< For action type Avegare PRB usage
in Uplink */
- U16 timePrd; /*!< Time Period for which measurement
+ uint16_t timePrd; /*!< Time Period for which measurement
is done */
CmLteCellId cellId; /*!< CellId for which measurement done*/
union {
* */
typedef struct RgInfL2MeasStopReq
{
- U32 transId; /*!< TransId to uniquely identify request */
- U8 measType; /*!< For action type Avegare PRB usage
+ uint32_t transId; /*!< TransId to uniquely identify request */
+ uint8_t measType; /*!< For action type Avegare PRB usage
in Uplink */
CmLteCellId cellId; /*!< CellId for which measurement done*/
} RgInfL2MeasStopReq;
* */
typedef struct RgInfL2MeasSndReq
{
- U32 transId; /*!< TransId to uniquely identify request */
- U8 measType; /*!< For action type Avegare PRB usage
+ uint32_t transId; /*!< TransId to uniquely identify request */
+ uint8_t measType; /*!< For action type Avegare PRB usage
in Uplink */
- U16 timePrd; /*!< Time Period for which measurement
+ uint16_t timePrd; /*!< Time Period for which measurement
is done */
CmLteCellId cellId; /*!< CellId for which measurement done*/
} RgInfL2MeasSndReq;
* */
typedef struct rgInfL2MeasCfm
{
- U16 transId; /*!< transId to map to request */
- U8 measType; /*!< Action for which measurement done */
+ uint16_t transId; /*!< transId to map to request */
+ uint8_t measType; /*!< Action for which measurement done */
CmLteCellId cellId; /*!< CellId for which measurement done*/
CmStatus cfm; /*!< Confirmation possible Values when measType
is invalid status -> NOK and reason -> INVALID */
CmLteRnti crnti; /*!< RNTI which uniquely identifies the UE
RNTI range is specified in Section
7.1 in 25.321 Specification. */
- U8 lcgId;
+ uint8_t lcgId;
Bool isGbr; /* Indicate if the LCG is Gbr */
} RgInfLcgRegReq;
7.1 in 25.321 Specification. */
CmLteRnti spsRnti; /*!< SPS RNTI. RNTI range is specified in
Section 7.1 in 25.321 Specification. */
- U8 spsLcCnt; /*!< identifies the number of SPS
+ uint8_t spsLcCnt; /*!< identifies the number of SPS
configured logical channels */
- U8 spsLcId[RGINF_MAX_NUM_DED_LC]; /*!< Logical Channel
+ uint8_t spsLcId[RGINF_MAX_NUM_DED_LC]; /*!< Logical Channel
Identifier. lcId value range is
defined in Section 6.2.1
in 36.321 Specification. */
- U8 implRelCnt; /*!< "implicitRelAfter" vallue */
- U16 spsPrd; /*!< SPS periodicity of the UE */
+ uint8_t implRelCnt; /*!< "implicitRelAfter" vallue */
+ uint16_t spsPrd; /*!< SPS periodicity of the UE */
} RgInfSpsLcInfo;
/**
Code Review / o-du / l2.git / blobdiff