--- /dev/null
+/*******************************************************************************
+################################################################################
+# Copyright (c) [2017-2019] [Radisys] #
+# #
+# Licensed under the Apache License, Version 2.0 (the "License"); #
+# you may not use this file except in compliance with the License. #
+# You may obtain a copy of the License at #
+# #
+# http://www.apache.org/licenses/LICENSE-2.0 #
+# #
+# Unless required by applicable law or agreed to in writing, software #
+# distributed under the License is distributed on an "AS IS" BASIS, #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. #
+# See the License for the specific language governing permissions and #
+# limitations under the License. #
+################################################################################
+*******************************************************************************/
+
+/********************************************************************20**
+
+ Name: LTE RLC file
+
+ Type: C include file
+
+ Desc: This file contains the constants required for LTE-RLC.
+ The defines in this file need to be changed by the customer
+ to reflect the software architecture needed to run under the
+ target system hardware architecture.
+
+ File: kw_env.h
+
+*********************************************************************21*/
+/** @file kw_env.h
+@brief RLC Hash definitions
+*/
+
+#ifndef __KWENVH__
+#define __KWENVH__
+
+#define KW_MAX_RLC_INSTANCES 2
+#define KW_MAX_LI KWU_MAX_STA_IND_SDU
+
+#define KW_MAX_DL_LI 28
+#define KW_MAX_NEW_DL_PDU 16
+/* kw003.201 Adding new environment variables */
+/* This parameter is utilized when KW_BG_DL_PROC enbled. This parameter */
+/* defines how many PDUs may be released in one go without affecting */
+/* TTI response time */
+/* kw004.201 modifed the value from 20 to 15 */
+#define KW_AM_MAX_PDUS_RLS 1
+/* This parameter governs maximum number of PDUs to processed at a */
+/* given point when KW_BG_UL_PROC is enabled. */
+/* kw004.201 modifed the value from 20 to 5 */
+#define KW_AM_MAX_UL_PDUS 1
+
+#define KW_AM_UM_MAX_UL_SDUS 1
+#define KW_AM_UM_MAX_DL_SDUS 300
+
+#ifdef SPLIT_RLC_DL_TASK
+#define KW_MAX_TO_BE_FREED 60
+#else
+#define KW_MAX_TO_BE_FREED 10
+#endif
+
+/* Number of packets queued in SDU Q after which overload
+ * START is signalled to PDCP for an UM bearer */
+#define KW_UM_RB_OVERLOAD_HIGH_THRES 512
+/* Number of packets queued in SDU Q after which overload
+ * STOP is signalled to PDCP for an UM bearer */
+#define KW_UM_RB_OVERLOAD_LOW_THRES 300
+
+/* Value of this macro can be in the range of 1 to RGU_MAX_PDU */
+#define KW_MAX_PDU 16
+
+#ifdef LTE_L2_MEAS
+/* This value is decided on the assumption that there will be maximum 3 active DRB at a time */
+#define KW_MAX_ACTV_DRB 2
+/* Assumption is that all UEs wont have all RBs with max SDU: if greater, will be ignored */
+#define KW_L2MEAS_SDUIDX ((KW_MAX_DL_LI/4)*KW_MAX_ACTV_DRB)
+/* Number of out standing SDUS in one RbCb : This would be sufficient but anything more will be discarded for counters */
+#define KW_L2MEAS_MAX_OUTSTNGSDU 31
+#endif
+
+
+#endif /* __KWENVH__ */
+\f
+/********************************************************************30**
+
+ End of file
+**********************************************************************/
Code Review / o-du / l2.git / blobdiff